# Dutch translations for the 'util-linux' Linux Utilities.
# This file is distributed under the same license as the util-linux package.
#
# Permission is granted to freely copy and distribute this file
# and modified versions, provided that this header is not removed
# and modified versions are marked as such.
#
#  ╒═════════════════════════╕
#  │   Hej hej, masz klej?   │
#  │ Heja heja, nemam kleja. │
#  ╘═════════════════════════╛
#
# Conventie: in het Nederlands zijn de docstrings in de derde persoon,
# niet in de imperatief of de infinitief.
#
# Woordgebruik:
# block    -> blok
# sector   -> sector
# cylinder -> cilinder
# volume   -> volumen
# filesystem type -> bestandssysteemsoort
# partition type  -> partitietype
# (inode blijft onvertaald)
#
# Berichtvertalingen die met ### beginnen zijn in feite debug-meldingen
# en de bijbehorende msgids zouden niet in dit bestand moeten voorkomen.
#
# Taco Witte <tcwitte@cs.uu.nl>, 2002, 2003.
# Luk Claes <luk.claes@ugent.be>, 2005.
# Benno Schulenberg <benno@vertaalt.nl>, 2006, 2007, 2008, 2009, 2010, 2011.
# Benno Schulenberg <benno@vertaalt.nl>, 2012, 2013, 2014, 2015, 2016.
msgid ""
msgstr ""
"Project-Id-Version: util-linux-2.29-rc2\n"
"Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
"POT-Creation-Date: 2017-05-23 11:41+0200\n"
"PO-Revision-Date: 2016-10-30 17:01+0100\n"
"Last-Translator: Benno Schulenberg <benno@vertaalt.nl>\n"
"Language-Team: Dutch <vertaling@vrijschrift.org>\n"
"Language: nl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Lokalize 1.0\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: disk-utils/addpart.c:14
#, c-format
msgid " %s <disk device> <partition number> <start> <length>\n"
msgstr "  %s <blokapparaat> <partitienummer> <begin> <lengte>\n"

#: disk-utils/addpart.c:18
msgid "Tell the kernel about the existence of a specified partition.\n"
msgstr "Vertelt de kernel over het bestaan van de opgegeven partitie.\n"

#: disk-utils/addpart.c:56 disk-utils/blockdev.c:276 disk-utils/blockdev.c:420
#: disk-utils/blockdev.c:446 disk-utils/cfdisk.c:2639 disk-utils/delpart.c:57
#: disk-utils/fdformat.c:227 disk-utils/fdisk.c:720 disk-utils/fdisk.c:1019
#: disk-utils/fdisk-list.c:321 disk-utils/fdisk-list.c:361
#: disk-utils/fdisk-list.c:380 disk-utils/fsck.c:1448
#: disk-utils/fsck.cramfs.c:155 disk-utils/fsck.cramfs.c:510
#: disk-utils/isosize.c:134 disk-utils/mkfs.bfs.c:189
#: disk-utils/mkfs.cramfs.c:173 disk-utils/mkfs.cramfs.c:661
#: disk-utils/mkfs.cramfs.c:788 disk-utils/mkfs.minix.c:819
#: disk-utils/mkswap.c:215 disk-utils/mkswap.c:244 disk-utils/partx.c:1013
#: disk-utils/resizepart.c:101 disk-utils/sfdisk.c:649 disk-utils/sfdisk.c:705
#: disk-utils/sfdisk.c:759 disk-utils/sfdisk.c:818 disk-utils/sfdisk.c:882
#: disk-utils/sfdisk.c:923 disk-utils/sfdisk.c:953 disk-utils/sfdisk.c:990
#: disk-utils/sfdisk.c:1574 disk-utils/swaplabel.c:60 libfdisk/src/bsd.c:640
#: lib/path.c:70 lib/path.c:82 login-utils/islocal.c:87 login-utils/last.c:670
#: login-utils/sulogin.c:443 login-utils/sulogin.c:480
#: login-utils/utmpdump.c:136 login-utils/utmpdump.c:354
#: login-utils/utmpdump.c:376 login-utils/vipw.c:259 login-utils/vipw.c:277
#: misc-utils/findmnt.c:1099 misc-utils/logger.c:1188 misc-utils/mcookie.c:115
#: misc-utils/uuidd.c:207 sys-utils/blkdiscard.c:182 sys-utils/blkzone.c:96
#: sys-utils/dmesg.c:522 sys-utils/eject.c:499 sys-utils/eject.c:699
#: sys-utils/fallocate.c:405 sys-utils/fsfreeze.c:117 sys-utils/fstrim.c:72
#: sys-utils/hwclock.c:215 sys-utils/ldattach.c:387 sys-utils/nsenter.c:130
#: sys-utils/rtcwake.c:136 sys-utils/rtcwake.c:270 sys-utils/setpriv.c:230
#: sys-utils/setpriv.c:529 sys-utils/setpriv.c:552 sys-utils/swapon.c:372
#: sys-utils/swapon.c:515 sys-utils/switch_root.c:167 sys-utils/unshare.c:106
#: sys-utils/unshare.c:121 sys-utils/wdctl.c:323 sys-utils/wdctl.c:379
#: term-utils/agetty.c:2624 term-utils/mesg.c:127 term-utils/script.c:426
#: term-utils/script.c:432 term-utils/script.c:434 term-utils/script.c:530
#: term-utils/scriptreplay.c:197 term-utils/scriptreplay.c:200
#: term-utils/wall.c:410 text-utils/colcrt.c:282 text-utils/more.c:513
#: text-utils/rev.c:141 text-utils/ul.c:224
#, c-format
msgid "cannot open %s"
msgstr "kan %s niet openen"

#: disk-utils/addpart.c:59 disk-utils/delpart.c:60 disk-utils/resizepart.c:98
msgid "invalid partition number argument"
msgstr "ongeldig partitienummer"

#: disk-utils/addpart.c:60
msgid "invalid start argument"
msgstr "ongeldig begin"

#: disk-utils/addpart.c:61 disk-utils/resizepart.c:108
msgid "invalid length argument"
msgstr "ongeldige lengte"

#: disk-utils/addpart.c:62
msgid "failed to add partition"
msgstr "toevoegen van partitie is mislukt"

#: disk-utils/blockdev.c:63
msgid "set read-only"
msgstr "alleen-lezen instellen"

#: disk-utils/blockdev.c:70
msgid "set read-write"
msgstr "lezen-en-schrijven instellen"

#: disk-utils/blockdev.c:76
msgid "get read-only"
msgstr "schrijfstatus tonen"

#: disk-utils/blockdev.c:82
msgid "get discard zeroes support status"
msgstr "ondersteuning voor weglaten van nullen tonen"

#: disk-utils/blockdev.c:88
msgid "get logical block (sector) size"
msgstr "logische sectorgrootte tonen"

#: disk-utils/blockdev.c:94
msgid "get physical block (sector) size"
msgstr "fysieke sectorgrootte tonen"

#: disk-utils/blockdev.c:100
msgid "get minimum I/O size"
msgstr "minimale in-/uitvoergrootte tonen"

#: disk-utils/blockdev.c:106
msgid "get optimal I/O size"
msgstr "optimale in-/uitvoergrootte tonen"

#: disk-utils/blockdev.c:112
msgid "get alignment offset in bytes"
msgstr "uitlijningspositie in bytes tonen"

#: disk-utils/blockdev.c:118
msgid "get max sectors per request"
msgstr "maximum aantal sectoren per verzoek tonen"

#: disk-utils/blockdev.c:124
msgid "get blocksize"
msgstr "blokgrootte tonen"

#: disk-utils/blockdev.c:131
msgid "set blocksize on file descriptor opening the block device"
msgstr "blokgrootte instellen op bestandsdescriptor die blok-apparaat opent"

#: disk-utils/blockdev.c:137
msgid "get 32-bit sector count (deprecated, use --getsz)"
msgstr "32-bits-sectoraantal tonen (verouderd; gebruik '--getsz')"

#: disk-utils/blockdev.c:143
msgid "get size in bytes"
msgstr "grootte in bytes tonen"

#: disk-utils/blockdev.c:150
msgid "set readahead"
msgstr "vooruitlezing instellen"

#: disk-utils/blockdev.c:156
msgid "get readahead"
msgstr "vooruitlezing tonen"

#: disk-utils/blockdev.c:163
msgid "set filesystem readahead"
msgstr "vooruitlezing van bestandssysteem instellen"

#: disk-utils/blockdev.c:169
msgid "get filesystem readahead"
msgstr "vooruitlezing van bestandssysteem tonen"

#: disk-utils/blockdev.c:173
msgid "flush buffers"
msgstr "buffers leegmaken"

#: disk-utils/blockdev.c:177
msgid "reread partition table"
msgstr "partitietabel opnieuw inlezen"

#: disk-utils/blockdev.c:184
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s -V\n"
" %1$s --report [devices]\n"
" %1$s [-v|-q] commands devices\n"
"\n"
"Available commands:\n"
msgstr ""
"\n"
"Gebruik:  %1$s -V\n"
"          %1$s --report [apparaat...]\n"
"          %1$s [-v|-q] opdracht... apparaat...\n"
"\n"
"Beschikbare opdrachten:\n"

#: disk-utils/blockdev.c:190
#, c-format
msgid " %-25s get size in 512-byte sectors\n"
msgstr "  %-25s grootte in 512-byte sectoren tonen\n"

#: disk-utils/blockdev.c:311
msgid "could not get device size"
msgstr "kan apparaatgrootte niet achterhalen"

#: disk-utils/blockdev.c:317
#, c-format
msgid "Unknown command: %s"
msgstr "Onbekende opdracht: %s"

#: disk-utils/blockdev.c:333
#, c-format
msgid "%s requires an argument"
msgstr "%s vereist een argument"

#: disk-utils/blockdev.c:368 disk-utils/blockdev.c:474
#, c-format
msgid "ioctl error on %s"
msgstr "ioctl()-fout voor %s"

#: disk-utils/blockdev.c:370
#, c-format
msgid "%s failed.\n"
msgstr "'%s' is mislukt.\n"

#: disk-utils/blockdev.c:377
#, c-format
msgid "%s succeeded.\n"
msgstr "%s is voltooid.\n"

#: disk-utils/blockdev.c:457
#, c-format
msgid "%s: failed to initialize sysfs handler"
msgstr "%s: initialiseren van 'sysfs'-verwerker is mislukt"

#: disk-utils/blockdev.c:461
#, c-format
msgid "%s: failed to read partition start from sysfs"
msgstr "%s: lezen van partitiebegin uit sysfs is mislukt"

#: disk-utils/blockdev.c:482
#, c-format
msgid "RO    RA   SSZ   BSZ   StartSec            Size   Device\n"
msgstr "Stat. RA SecGt BlkGt BeginSector        Grootte   Apparaat\n"

#: disk-utils/cfdisk.c:184
msgid "Bootable"
msgstr "opstartbaar"

#: disk-utils/cfdisk.c:184
msgid "Toggle bootable flag of the current partition"
msgstr "B = huidige partitie wel/niet als opstartbaar markeren"

#: disk-utils/cfdisk.c:185
msgid "Delete"
msgstr "verwijderen"

#: disk-utils/cfdisk.c:185
msgid "Delete the current partition"
msgstr "D = deze partitie verwijderen"

#: disk-utils/cfdisk.c:186
msgid "New"
msgstr "Nieuw"

#: disk-utils/cfdisk.c:186
msgid "Create new partition from free space"
msgstr "N = nieuwe partitie maken in de vrije ruimte"

#: disk-utils/cfdisk.c:187
msgid "Quit"
msgstr "stoppen"

#: disk-utils/cfdisk.c:187
msgid "Quit program without writing changes"
msgstr "Q = programma afsluiten zonder partitietabel te schrijven"

#: disk-utils/cfdisk.c:188 libfdisk/src/bsd.c:438 libfdisk/src/bsd.c:1022
#: libfdisk/src/dos.c:2396 libfdisk/src/gpt.c:3017 libfdisk/src/sgi.c:1159
#: libfdisk/src/sun.c:1119
msgid "Type"
msgstr "Type"

#: disk-utils/cfdisk.c:188
msgid "Change the partition type"
msgstr "T = het partitietype wijzigen"

#: disk-utils/cfdisk.c:189
msgid "Help"
msgstr "Hulp"

#: disk-utils/cfdisk.c:189
msgid "Print help screen"
msgstr "H = hulpscherm tonen"

#: disk-utils/cfdisk.c:190
msgid "Sort"
msgstr "Sorteren"

#: disk-utils/cfdisk.c:190
msgid "Fix partitions order"
msgstr "partitievolgorde repareren"

#: disk-utils/cfdisk.c:191
msgid "Write"
msgstr "schrijven"

#: disk-utils/cfdisk.c:191
msgid "Write partition table to disk (this might destroy data)"
msgstr "W = partitietabel naar schijf schrijven (dit kan gegevens wissen)"

#: disk-utils/cfdisk.c:192
msgid "Dump"
msgstr "dumpen"

#: disk-utils/cfdisk.c:192
msgid "Dump partition table to sfdisk compatible script file"
msgstr "U = partitietabel opslaan als een sfdisk-compatibel script"

#: disk-utils/cfdisk.c:625 disk-utils/fdisk.c:417
#, c-format
msgid "internal error: unsupported dialog type %d"
msgstr "**interne programmafout**: niet-ondersteund dialoogtype %d"

#: disk-utils/cfdisk.c:1262
#, c-format
msgid "%s (mounted)"
msgstr "%s (aangekoppeld)"

#: disk-utils/cfdisk.c:1282
msgid "Partition name:"
msgstr "Partitienaam:"

#: disk-utils/cfdisk.c:1289
msgid "Partition UUID:"
msgstr "Partitie-UUID:"

#: disk-utils/cfdisk.c:1301
msgid "Partition type:"
msgstr "Partitietype:"

#: disk-utils/cfdisk.c:1308
msgid "Attributes:"
msgstr "Eigenschappen:"

#: disk-utils/cfdisk.c:1332
msgid "Filesystem UUID:"
msgstr "Bestandssysteem-UUID:"

#: disk-utils/cfdisk.c:1339
msgid "Filesystem LABEL:"
msgstr "Bestandssysteemlabel:"

#: disk-utils/cfdisk.c:1345
msgid "Filesystem:"
msgstr "Bestandssysteem:"

#: disk-utils/cfdisk.c:1350
msgid "Mountpoint:"
msgstr "Aankoppelingspunt:"

#: disk-utils/cfdisk.c:1693
#, c-format
msgid "Disk: %s"
msgstr "Schijf: %s"

#: disk-utils/cfdisk.c:1695
#, c-format
msgid "Size: %s, %ju bytes, %ju sectors"
msgstr "Grootte: %s, %ju bytes, %ju sectoren"

#: disk-utils/cfdisk.c:1698
#, c-format
msgid "Label: %s, identifier: %s"
msgstr "Label: %s,  ID: %s"

#: disk-utils/cfdisk.c:1701
#, c-format
msgid "Label: %s"
msgstr "Label: %s"

#: disk-utils/cfdisk.c:1842
msgid "May be followed by M for MiB, G for GiB, T for TiB, or S for sectors."
msgstr "Kan gevolgd worden door M voor MiB, G for GiB, T voor TiB, of S voor sectoren."

#: disk-utils/cfdisk.c:1848
msgid "Please, specify size."
msgstr "Geen grootte opgegeven."

#: disk-utils/cfdisk.c:1870
#, c-format
msgid "Minimum size is %ju bytes."
msgstr "Minimum grootte is %ju bytes."

#: disk-utils/cfdisk.c:1879
#, c-format
msgid "Maximum size is %ju bytes."
msgstr "Maximum grootte is %ju bytes."

#: disk-utils/cfdisk.c:1886
msgid "Failed to parse size."
msgstr "Ontleden van grootte is mislukt."

#: disk-utils/cfdisk.c:1944
msgid "Select partition type"
msgstr "Kies een partitietype"

#: disk-utils/cfdisk.c:1990 disk-utils/cfdisk.c:2020
msgid "Enter script file name: "
msgstr "Voer naam van scriptbestand in: "

#: disk-utils/cfdisk.c:1991
msgid "The script file will be applied to in-memory partition table."
msgstr "Het script zal worden toegepast op een partitietabel in het geheugen."

#: disk-utils/cfdisk.c:2000 disk-utils/cfdisk.c:2042
#: disk-utils/fdisk-menu.c:465 disk-utils/fdisk-menu.c:503
#, c-format
msgid "Cannot open %s"
msgstr "Kan %s niet openen"

# FIXME: capital + period
#: disk-utils/cfdisk.c:2002 disk-utils/fdisk-menu.c:467
#, c-format
msgid "Failed to parse script file %s"
msgstr "Ontleden van scriptbestand %s is mislukt."

# FIXME: capital + period
#: disk-utils/cfdisk.c:2004 disk-utils/fdisk-menu.c:469
#, c-format
msgid "Failed to apply script %s"
msgstr "Toepassen van script %s is mislukt."

#: disk-utils/cfdisk.c:2021
msgid "The current in-memory partition table will be dumped to the file."
msgstr "De huidige partitietabel in het geheugen zal worden opgeslagen in het bestand."

# FIXME: capital + period
#: disk-utils/cfdisk.c:2029 disk-utils/fdisk-menu.c:491
msgid "Failed to allocate script handler"
msgstr "Reserveren van geheugen voor script-verwerker is mislukt."

#: disk-utils/cfdisk.c:2035
msgid "Failed to read disk layout into script."
msgstr "Omzetten van schijfindeling naar een script is mislukt."

#: disk-utils/cfdisk.c:2049
msgid "Disk layout successfully dumped."
msgstr "Schijfindeling is met succes opgeslagen."

# FIXME: capital + period
#: disk-utils/cfdisk.c:2052 disk-utils/fdisk-menu.c:509
#, c-format
msgid "Failed to write script %s"
msgstr "Schrijven van scriptbestand %s is mislukt."

#: disk-utils/cfdisk.c:2088
msgid "Select label type"
msgstr "Kies een labeltype"

#: disk-utils/cfdisk.c:2091 disk-utils/fdisk.c:1027
msgid "Device does not contain a recognized partition table."
msgstr "Apparaat bevat geen herkenbare partitietabel."

#: disk-utils/cfdisk.c:2099
msgid "Select a type to create a new label or press 'L' to load script file."
msgstr "Kies hierboven een labeltype, of toets 'L' om een scriptbestand te laden."

#: disk-utils/cfdisk.c:2144
msgid "This is cfdisk, a curses-based disk partitioning program."
msgstr "Dit is 'cfdisk', een menu-gestuurd schijfpartitioneringsprogramma."

#: disk-utils/cfdisk.c:2145
msgid "It lets you create, delete, and modify partitions on a block device."
msgstr "U kunt ermee op een blok-apparaat partities aanmaken, aanpassen of verwijderen."

#: disk-utils/cfdisk.c:2147
msgid "Command      Meaning"
msgstr "Toets    Betekenis"

#: disk-utils/cfdisk.c:2148
msgid "-------      -------"
msgstr "-----    ---------"

#: disk-utils/cfdisk.c:2149
msgid "  b          Toggle bootable flag of the current partition"
msgstr "  b      'opstartbaar'-vlag voor huidige partitie aan/uitzetten"

#: disk-utils/cfdisk.c:2150
msgid "  d          Delete the current partition"
msgstr "  d      huidige partitie verwijderen"

#: disk-utils/cfdisk.c:2151
msgid "  h          Print this screen"
msgstr "  h      dit hulpscherm tonen"

#: disk-utils/cfdisk.c:2152
msgid "  n          Create new partition from free space"
msgstr "  n      nieuwe partitie maken in de vrije ruimte"

#: disk-utils/cfdisk.c:2153
msgid "  q          Quit program without writing partition table"
msgstr "  q      programma afsluiten zonder de partitietabel te schrijven"

#: disk-utils/cfdisk.c:2154
msgid "  s          Fix partitions order (only when in disarray)"
msgstr "  s      partitievolgorde corrigeren (wanneer in wanorde)"

#: disk-utils/cfdisk.c:2155
msgid "  t          Change the partition type"
msgstr "  t      partitietype wijzigen"

#: disk-utils/cfdisk.c:2156
msgid "  u          Dump disk layout to sfdisk compatible script file"
msgstr "  u      schijfindeling opslaan als sfdisk-compatibel scriptbestand"

#: disk-utils/cfdisk.c:2157
msgid "  W          Write partition table to disk (you must enter uppercase W);"
msgstr "  W      partitietabel naar schijf schrijven (moet met hoofdletter);"

#: disk-utils/cfdisk.c:2158
msgid "               since this might destroy data on the disk, you must either"
msgstr "           omdat dit mogelijk gegevens op de schijf wist, dient u het"

#: disk-utils/cfdisk.c:2159
msgid "               confirm or deny the write by entering 'yes' or 'no'"
msgstr "           schrijven te bevestigen met 'ja' of te weigeren met 'nee'"

#: disk-utils/cfdisk.c:2160
msgid "  x          Display/hide extra information about a partition"
msgstr "  x      extra informatie over partitie tonen/verbergen"

#: disk-utils/cfdisk.c:2161
msgid "Up Arrow     Move cursor to the previous partition"
msgstr "omhoog   aanwijzer naar vorige partitie verplaatsen"

#: disk-utils/cfdisk.c:2162
msgid "Down Arrow   Move cursor to the next partition"
msgstr "omlaag   aanwijzer naar volgende partitie verplaatsen"

#: disk-utils/cfdisk.c:2163
msgid "Left Arrow   Move cursor to the previous menu item"
msgstr "links    aanwijzer naar vorige menu-item verplaatsen"

#: disk-utils/cfdisk.c:2164
msgid "Right Arrow  Move cursor to the next menu item"
msgstr "rechts   aanwijzer naar volgende menu-item verplaatsen"

#: disk-utils/cfdisk.c:2166
msgid "Note: All of the commands can be entered with either upper or lower"
msgstr "Opmerking: alle opdrachten kunnen zowel met hoofdletter als kleine letter"

#: disk-utils/cfdisk.c:2167
msgid "case letters (except for Write)."
msgstr "worden ingevoerd -- behalve W."

#: disk-utils/cfdisk.c:2169
msgid "Use lsblk(8) or partx(8) to see more details about the device."
msgstr "Gebruik lsblk(8) of partx(8) om meer details over het apparaat te zien."

#: disk-utils/cfdisk.c:2179 disk-utils/cfdisk.c:2438
msgid "Press a key to continue."
msgstr "Druk op een toets om verder te gaan."

#: disk-utils/cfdisk.c:2261
msgid "Could not toggle the flag."
msgstr "Kan vlag niet omzetten."

#: disk-utils/cfdisk.c:2271
#, c-format
msgid "Could not delete partition %zu."
msgstr "Kan partitie %zu niet verwijderen."

#: disk-utils/cfdisk.c:2273 disk-utils/fdisk-menu.c:633
#, c-format
msgid "Partition %zu has been deleted."
msgstr "Partitie %zu is verwijderd."

#: disk-utils/cfdisk.c:2294
msgid "Partition size: "
msgstr "Partitiegrootte: "

#: disk-utils/cfdisk.c:2335
#, c-format
msgid "Changed type of partition %zu."
msgstr "Het type van partitie %zu is gewijzigd."

#: disk-utils/cfdisk.c:2337
#, c-format
msgid "The type of partition %zu is unchanged."
msgstr "Het type van partitie %zu is onveranderd."

#: disk-utils/cfdisk.c:2354 disk-utils/cfdisk.c:2467 disk-utils/fdisk.c:1016
#: disk-utils/fdisk-menu.c:570
msgid "Device is open in read-only mode."
msgstr "Apparaat is geopend in alleenlezen-modus."

#: disk-utils/cfdisk.c:2359
msgid "Are you sure you want to write the partition table to disk? "
msgstr "Weet u zeker dat u de partitietabel naar schijf wilt schrijven? "

#: disk-utils/cfdisk.c:2361
msgid "Type \"yes\" or \"no\", or press ESC to leave this dialog."
msgstr "Typ \"ja\" of \"nee\", of druk op Esc om deze dialoog te verlaten."

#: disk-utils/cfdisk.c:2366 login-utils/lslogins.c:209 sys-utils/lscpu.c:1587
#: sys-utils/lscpu.c:1597 sys-utils/lsmem.c:200
msgid "yes"
msgstr "ja"

#: disk-utils/cfdisk.c:2367
msgid "Did not write partition table to disk."
msgstr "Partitietabel is NIET naar schijf geschreven."

#: disk-utils/cfdisk.c:2372
msgid "Failed to write disklabel."
msgstr "Schrijven van schijflabel is mislukt."

#: disk-utils/cfdisk.c:2375 disk-utils/fdisk-menu.c:578
msgid "The partition table has been altered."
msgstr "De partitietabel is gewijzigd."

#: disk-utils/cfdisk.c:2398 disk-utils/cfdisk.c:2469
msgid "Note that partition table entries are not in disk order now."
msgstr "Merk op dat partitietabel-items nu niet in schijfvolgorde liggen."

#: disk-utils/cfdisk.c:2435
#, c-format
msgid "Device already contains a %s signature; it will be removed by a write command."
msgstr "Apparaat bevat al een %s-vingerafdruk; deze zal gewist worden door een schrijfopdracht."

#: disk-utils/cfdisk.c:2446
msgid "failed to create a new disklabel"
msgstr "aanmaken van nieuw schijflabel is mislukt"

#: disk-utils/cfdisk.c:2454
msgid "failed to read partitions"
msgstr "lezen van partities is mislukt"

#: disk-utils/cfdisk.c:2549
#, c-format
msgid " %1$s [options] <disk>\n"
msgstr "  %1$s [opties] <apparaat>\n"

#: disk-utils/cfdisk.c:2552 disk-utils/fdisk.c:762 disk-utils/sfdisk.c:1851
msgid "Display or manipulate a disk partition table.\n"
msgstr "Toont of wijzigt een partitietabel.\n"

#: disk-utils/cfdisk.c:2555
msgid " -L, --color[=<when>]     colorize output (auto, always or never)\n"
msgstr "  -L, --color[=<wanneer>]    de uitvoer kleuren ('auto', 'always', of 'never')\n"

# COMMA
#: disk-utils/cfdisk.c:2558
msgid " -z, --zero               start with zeroed partition table\n"
msgstr "  -z, --zero                 met een lege partitietabel beginnen\n"

#: disk-utils/cfdisk.c:2597 disk-utils/fdisk.c:907 disk-utils/sfdisk.c:2128
#: misc-utils/cal.c:390 sys-utils/dmesg.c:1333 text-utils/hexdump.c:114
msgid "unsupported color mode"
msgstr "ongeldige kleurmodus"

#: disk-utils/cfdisk.c:2617 disk-utils/fdisk.c:843 disk-utils/sfdisk.c:225
msgid "failed to allocate libfdisk context"
msgstr "reserveren van geheugen voor 'libfdisk'-context is mislukt"

#: disk-utils/delpart.c:14
#, c-format
msgid " %s <disk device> <partition number>\n"
msgstr "  %s <blokapparaat> <partitienummer>\n"

#: disk-utils/delpart.c:18
msgid "Tell the kernel to forget about a specified partition.\n"
msgstr "Vertelt de kernel de opgegeven partitie te vergeten.\n"

#: disk-utils/delpart.c:61
msgid "failed to remove partition"
msgstr "verwijderen van partitie is mislukt"

#: disk-utils/fdformat.c:53
#, c-format
msgid "Formatting ... "
msgstr "Formatteren... "

#: disk-utils/fdformat.c:68 disk-utils/fdformat.c:138
#, c-format
msgid "done\n"
msgstr "voltooid\n"

#: disk-utils/fdformat.c:80
#, c-format
msgid "Verifying ... "
msgstr "Controleren... "

#: disk-utils/fdformat.c:108
msgid "Read: "
msgstr "Gelezen: "

#: disk-utils/fdformat.c:110
#, c-format
msgid "Problem reading track/head %u/%u, expected %d, read %d\n"
msgstr "probleem bij lezen van spoor %u, kop %u; verwacht: %d, gelezen: %d\n"

#: disk-utils/fdformat.c:127
#, c-format
msgid ""
"bad data in track/head %u/%u\n"
"Continuing ... "
msgstr ""
"slechte gegevens op spoor %u, kop %u;\n"
"doorgegaan... "

#: disk-utils/fdformat.c:144 disk-utils/fsck.minix.c:182
#: disk-utils/swaplabel.c:117 misc-utils/wipefs.c:458 sys-utils/blkdiscard.c:84
#: sys-utils/tunelp.c:91
#, c-format
msgid " %s [options] <device>\n"
msgstr "  %s [opties] <apparaat>\n"

#: disk-utils/fdformat.c:148
msgid "Do a low-level formatting of a floppy disk.\n"
msgstr "Formatteert een diskette.\n"

#: disk-utils/fdformat.c:151
msgid " -f, --from <N>    start at the track N (default 0)\n"
msgstr "  -f, --from <getal>       starten bij dit spoor (standaard 0)\n"

#: disk-utils/fdformat.c:152
msgid " -t, --to <N>      stop at the track N\n"
msgstr "  -t, --to <getal>         stoppen bij dit spoor\n"

#: disk-utils/fdformat.c:153
msgid ""
" -r, --repair <N>  try to repair tracks failed during\n"
"                     the verification (max N retries)\n"
msgstr ""
"  -r, --repair <aantal>    proberen sporen die niet door de controle kwamen\n"
"                             te repareren (maximaal <aantal> pogingen)\n"

#: disk-utils/fdformat.c:155
msgid " -n, --no-verify   disable the verification after the format\n"
msgstr "  -n, --no-verify          geen controle uitvoeren na het formatteren\n"

#: disk-utils/fdformat.c:194
msgid "invalid argument - from"
msgstr "ongeldig argument bij --from"

#: disk-utils/fdformat.c:198
msgid "invalid argument - to"
msgstr "ongeldig argument bij --to"

#: disk-utils/fdformat.c:201
msgid "invalid argument - repair"
msgstr "ongeldig argument bij --repair"

#: disk-utils/fdformat.c:221 disk-utils/fsck.cramfs.c:151
#: disk-utils/mkfs.bfs.c:185 disk-utils/mkfs.cramfs.c:338
#: disk-utils/mkfs.cramfs.c:748 disk-utils/mkfs.cramfs.c:785
#: disk-utils/mkfs.minix.c:816 disk-utils/mkswap.c:241 disk-utils/partx.c:952
#: login-utils/last.c:684 login-utils/utmpdump.c:139 misc-utils/namei.c:135
#: misc-utils/rename.c:63 sys-utils/blkdiscard.c:185 sys-utils/blkzone.c:99
#: sys-utils/dmesg.c:524 sys-utils/fallocate.c:216 sys-utils/fsfreeze.c:120
#: sys-utils/fstrim.c:77 sys-utils/nsenter.c:165 sys-utils/nsenter.c:169
#: sys-utils/swapon.c:520 sys-utils/switch_root.c:94
#: sys-utils/switch_root.c:137 term-utils/mesg.c:129 text-utils/more.c:504
#, c-format
msgid "stat of %s failed"
msgstr "status opvragen van %s is mislukt"

#: disk-utils/fdformat.c:224 disk-utils/partx.c:1010 misc-utils/lsblk.c:1499
#: sys-utils/blkdiscard.c:187 sys-utils/blkzone.c:101
#: sys-utils/mountpoint.c:107
#, c-format
msgid "%s: not a block device"
msgstr "%s: is geen blok-apparaat"

#: disk-utils/fdformat.c:229
msgid "could not determine current format type"
msgstr "kan huidige soort formattering niet achterhalen"

# FIXME: add translator hint
#: disk-utils/fdformat.c:231
#, c-format
msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
msgstr "%szijdig, %d sporen, %d sectoren/spoor.  Totale capaciteit %d kB.\n"

#: disk-utils/fdformat.c:232
msgid "Double"
msgstr "Dubbel"

#: disk-utils/fdformat.c:232
msgid "Single"
msgstr "Enkel"

#: disk-utils/fdformat.c:239
msgid "user defined start track exceeds the medium specific maximum"
msgstr "opgegeven beginspoor is groter dan de floppy toestaat"

#: disk-utils/fdformat.c:241
msgid "user defined end track exceeds the medium specific maximum"
msgstr "opgegeven eindspoor is groter dan de floppy toestaat"

#: disk-utils/fdformat.c:243
msgid "user defined start track exceeds the user defined end track"
msgstr "opgegeven beginspoor is groter dan eindspoor"

#: disk-utils/fdformat.c:251 misc-utils/logger.c:987
msgid "close failed"
msgstr "sluiten is mislukt"

#: disk-utils/fdisk.c:97 disk-utils/fdisk.c:113
#, c-format
msgid ""
"\n"
"Do you really want to quit? "
msgstr ""
"\n"
"Wilt u echt afsluiten? "

#: disk-utils/fdisk.c:160
#, c-format
msgid "Select (default %c): "
msgstr "Selecteer (standaard is %c): "

#: disk-utils/fdisk.c:165
#, c-format
msgid "Using default response %c."
msgstr "Standaardwaarde %c wordt gebruikt."

#: disk-utils/fdisk.c:178 disk-utils/fdisk.c:252 disk-utils/fdisk.c:327
#: libfdisk/src/dos.c:1223 libfdisk/src/gpt.c:2359
msgid "Value out of range."
msgstr "Waarde valt buiten bereik."

#: disk-utils/fdisk.c:207
#, c-format
msgid "%s (%s, default %c): "
msgstr "%s (%s, standaard %c): "

#: disk-utils/fdisk.c:210 disk-utils/fdisk.c:277
#, c-format
msgid "%s (%s, default %<PRIu64>): "
msgstr "%s (%s, standaard %<PRIu64>): "

#: disk-utils/fdisk.c:215
#, c-format
msgid "%s (%c-%c, default %c): "
msgstr "%s (%c-%c, standaard %c): "

#: disk-utils/fdisk.c:219 disk-utils/fdisk.c:281
#, c-format
msgid "%s (%<PRIu64>-%<PRIu64>, default %<PRIu64>): "
msgstr "%s (%<PRIu64>-%<PRIu64>, standaard %<PRIu64>): "

#: disk-utils/fdisk.c:222
#, c-format
msgid "%s (%c-%c): "
msgstr "%s (%c-%c): "

# FIXME: don't gettextize
#: disk-utils/fdisk.c:225 disk-utils/fdisk.c:284
#, c-format
msgid "%s (%<PRIu64>-%<PRIu64>): "
msgstr "%s (%<PRIu64>-%<PRIu64>): "

#: disk-utils/fdisk.c:394 disk-utils/sfdisk.c:199
msgid " [Y]es/[N]o: "
msgstr " [J]a/[N]ee: "

#: disk-utils/fdisk.c:435
msgid "Hex code (type L to list all codes): "
msgstr "Hex-code (typ L om alle codes te zien): "

#: disk-utils/fdisk.c:436
msgid "Partition type (type L to list all types): "
msgstr "Partitietype (typ L om alle mogelijke types te zien): "

#: disk-utils/fdisk.c:538
msgid "DOS Compatibility flag is set (DEPRECATED!)"
msgstr "DOS-compatibiliteit is aangezet  (VEROUDERD!)"

#: disk-utils/fdisk.c:539
msgid "DOS Compatibility flag is not set"
msgstr "DOS-compatibiliteit is uitgezet"

#: disk-utils/fdisk.c:560 disk-utils/fdisk.c:596
#, c-format
msgid "Partition %zu does not exist yet!"
msgstr "Partitie %zu bestaat nog niet!"

#: disk-utils/fdisk.c:565 disk-utils/fdisk.c:574 libfdisk/src/ask.c:995
msgid "Unknown"
msgstr "[onbekend]"

#: disk-utils/fdisk.c:573
#, c-format
msgid "Changed type of partition '%s' to '%s'."
msgstr "Het type van de partitie is veranderd van '%s' naar '%s'."

#: disk-utils/fdisk.c:577
#, c-format
msgid "Type of partition %zu is unchanged: %s."
msgstr "Het type van partitie %zu is onveranderd: %s."

# FIXME: don't gettextize
#: disk-utils/fdisk.c:616
#, c-format
msgid "%15s: %s"
msgstr "%15s: %s"

#: disk-utils/fdisk.c:673
#, c-format
msgid ""
"\n"
"%s: offset = %<PRIu64>, size = %zu bytes."
msgstr ""
"\n"
"%s: positie = %<PRIu64>, grootte = %zu bytes."

#: disk-utils/fdisk.c:679
msgid "cannot seek"
msgstr "kan geen 'seek' doen"

#: disk-utils/fdisk.c:684
msgid "cannot read"
msgstr "kan niet lezen"

#: disk-utils/fdisk.c:697 libfdisk/src/bsd.c:258 libfdisk/src/dos.c:964
#: libfdisk/src/gpt.c:2292
msgid "First sector"
msgstr "Eerste sector"

#: disk-utils/fdisk.c:724
#, c-format
msgid "BLKGETSIZE ioctl failed on %s"
msgstr "ioctl(BLKGETSIZE) is mislukt op %s"

#: disk-utils/fdisk.c:742 disk-utils/sfdisk.c:1483
#, fuzzy, c-format
msgid "The old %s signature will be removed by a write command."
msgstr "De vingerafdruk zal gewist worden door een schrijfopdracht."

#: disk-utils/fdisk.c:746
#, fuzzy, c-format
msgid "The old %s signature may remain on the device. It is recommended to wipe the device with wipefs(8) or fdisk --wipe, in order to avoid possible collisions."
msgstr "Het wordt sterk aangeraden op het apparaat met wipefs(8) te wissen, om mogelijke \"botsingen\" te vermijden."

#: disk-utils/fdisk.c:757
#, c-format
msgid ""
" %1$s [options] <disk>      change partition table\n"
" %1$s [options] -l [<disk>] list partition table(s)\n"
msgstr ""
"  %1$s [opties] <schijf>       partitietabel wijzigen\n"
"  %1$s [opties] -l [<schijf>]  partitietabel(len) tonen\n"

#: disk-utils/fdisk.c:765
msgid " -b, --sector-size <size>      physical and logical sector size\n"
msgstr "  -b, --sector-size <getal>  grootte van fysieke en logische sector\n"

#: disk-utils/fdisk.c:766
msgid " -B, --protect-boot            don't erase bootbits when creating a new label\n"
msgstr "  -B, --protect-boot         bootbits niet wissen bij aanmaken van nieuw label\n"

#: disk-utils/fdisk.c:767
msgid " -c, --compatibility[=<mode>]  mode is 'dos' or 'nondos' (default)\n"
msgstr "  -c, --compatibility[=<modus>]  compatibiliteitsmodus: 'dos', of 'nondos' (standaard)\n"

#: disk-utils/fdisk.c:768
msgid " -L, --color[=<when>]          colorize output (auto, always or never)\n"
msgstr "  -L, --color[=<wanneer>]    de uitvoer kleuren ('auto', 'always', of 'never')\n"

# AND exit
#: disk-utils/fdisk.c:771
msgid " -l, --list                    display partitions and exit\n"
msgstr "  -l, --list                 partities tonen en stoppen\n"

#: disk-utils/fdisk.c:772
msgid " -o, --output <list>           output columns\n"
msgstr "  -o, --output <lijst>       te tonen kolommen in de uitvoer\n"

#: disk-utils/fdisk.c:773
msgid " -t, --type <type>             recognize specified partition table type only\n"
msgstr "  -t, --type <type>          alleen dit type partitie herkennen\n"

#: disk-utils/fdisk.c:774
msgid " -u, --units[=<unit>]          display units: 'cylinders' or 'sectors' (default)\n"
msgstr "  -u, --units[=<eenheid>]    weergave-eenheid: 'cylinders', of 'sectors' (standaard)\n"

#: disk-utils/fdisk.c:775
msgid " -s, --getsz                   display device size in 512-byte sectors [DEPRECATED]\n"
msgstr "  -s, --getsz                apparaatgrootte tonen in 512-byte sectoren [VEROUDERD]\n"

#: disk-utils/fdisk.c:776
msgid "     --bytes                   print SIZE in bytes rather than in human readable format\n"
msgstr "      --bytes                grootte in bytes weergeven i.p.v. in leesbare vorm\n"

#: disk-utils/fdisk.c:777
msgid " -w, --wipe <mode>             wipe signatures (auto, always or never)\n"
msgstr "  -w, --wipe <wanneer>       vingerafdrukken wissen ('auto', 'always', 'never')\n"

#: disk-utils/fdisk.c:778 disk-utils/sfdisk.c:1894
msgid " -W, --wipe-partitions <mode>  wipe signatures from new partitions (auto, always or never)\n"
msgstr ""
"  -W, --wipe-partitions <wanneer>     vingerafdrukken van nieuwe partities wissen\n"
"                                        ('auto', 'always', 'never')\n"

#: disk-utils/fdisk.c:781
msgid " -C, --cylinders <number>      specify the number of cylinders\n"
msgstr "  -C, --cylinders <getal>    het aantal te gebruiken cilinders\n"

#: disk-utils/fdisk.c:782
msgid " -H, --heads <number>          specify the number of heads\n"
msgstr "  -H, heads <getal>          het aantal te gebruiken koppen\n"

#: disk-utils/fdisk.c:783
msgid " -S, --sectors <number>        specify the number of sectors per track\n"
msgstr "  -S, --sectors <getal>      het aantal sectoren per spoor\n"

#: disk-utils/fdisk.c:853 disk-utils/partx.c:874
msgid "invalid sector size argument"
msgstr "ongeldige sectorgrootte"

#: disk-utils/fdisk.c:865
msgid "invalid cylinders argument"
msgstr "ongeldig aantal cilinders"

#: disk-utils/fdisk.c:877
msgid "not found DOS label driver"
msgstr "kan DOS-label-stuurprogramma niet vinden"

#: disk-utils/fdisk.c:883
#, c-format
msgid "unknown compatibility mode '%s'"
msgstr "onbekende compatibiliteitsmodus '%s'"

#: disk-utils/fdisk.c:892
msgid "invalid heads argument"
msgstr "ongeldig aantal koppen"

#: disk-utils/fdisk.c:898
msgid "invalid sectors argument"
msgstr "ongeldig aantal sectoren"

#: disk-utils/fdisk.c:924
#, c-format
msgid "unsupported disklabel: %s"
msgstr "ongeldig schijflabel: %s"

#: disk-utils/fdisk.c:941 disk-utils/fdisk.c:946 disk-utils/sfdisk.c:2092
#: disk-utils/sfdisk.c:2097
msgid "unsupported wipe mode"
msgstr "ongeldige wismodus"

#: disk-utils/fdisk.c:959
msgid "The device properties (sector size and geometry) should be used with one specified device only."
msgstr ""
"Apparaateigenschappen (sectorgrootte en geometrie) dienen\n"
"met slechts één apparaat gebruikt te worden."

#: disk-utils/fdisk.c:1007
#, c-format
msgid "Welcome to fdisk (%s)."
msgstr "Welkom bij 'fdisk' (%s)."

#: disk-utils/fdisk.c:1009 disk-utils/sfdisk.c:1625
msgid ""
"Changes will remain in memory only, until you decide to write them.\n"
"Be careful before using the write command.\n"
msgstr ""
"Wijzigingen worden alleen in het computergeheugen gemaakt,\n"
"tot het moment dat u besluit ze naar schijf te schrijven.\n"
"Wees voorzichtig vóór het gebruik van de schrijfopdracht.\n"

#: disk-utils/fdisk.c:1032
msgid "A hybrid GPT was detected. You have to sync the hybrid MBR manually (expert command 'M')."
msgstr ""
"Een hybride GPT is gedetecteerd.\n"
"U dient de hybride MBR handmatig te synchroniseren (expertopdracht 'M')."

#: disk-utils/fdisk-list.c:43
#, c-format
msgid "Disklabel type: %s"
msgstr "Schijflabeltype: %s"

#: disk-utils/fdisk-list.c:47
#, c-format
msgid "Disk identifier: %s"
msgstr "Schijf-ID: %s"

#: disk-utils/fdisk-list.c:60
#, c-format
msgid "Disk %s: %s, %ju bytes, %ju sectors"
msgstr "Schijf %s: %s, %ju bytes, %ju sectoren"

#: disk-utils/fdisk-list.c:67
#, c-format
msgid "Geometry: %d heads, %llu sectors/track, %llu cylinders"
msgstr "Geometrie: %d koppen, %llu sectoren/spoor, %llu cilinders"

#: disk-utils/fdisk-list.c:72 disk-utils/fdisk-list.c:293
#, c-format
msgid "Units: %s of %d * %ld = %ld bytes"
msgstr "Eenheid: %s van %d * %ld = %ld bytes"

#: disk-utils/fdisk-list.c:78 disk-utils/fdisk-list.c:299
#, c-format
msgid "Sector size (logical/physical): %lu bytes / %lu bytes"
msgstr "Sectorgrootte (logisch/fysiek): %lu bytes / %lu bytes"

#: disk-utils/fdisk-list.c:81
#, c-format
msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes"
msgstr "In-/uitvoergrootte (minimaal/optimaal): %lu bytes / %lu bytes"

#: disk-utils/fdisk-list.c:85
#, c-format
msgid "Alignment offset: %lu bytes"
msgstr "Uitlijningspositie: %lu bytes"

#: disk-utils/fdisk-list.c:116 disk-utils/fdisk-list.c:236
#: disk-utils/fsck.c:1244
msgid "failed to allocate iterator"
msgstr "reserveren van geheugen voor iterator is mislukt"

#: disk-utils/fdisk-list.c:122 disk-utils/fdisk-list.c:242
#: disk-utils/partx.c:667 login-utils/lslogins.c:918 misc-utils/fincore.c:362
#: misc-utils/findmnt.c:1598 misc-utils/lsblk.c:1897 misc-utils/lslocks.c:449
#: sys-utils/losetup.c:314 sys-utils/lscpu.c:1760 sys-utils/lscpu.c:1863
#: sys-utils/lsipc.c:338 sys-utils/prlimit.c:297 sys-utils/swapon.c:281
#: sys-utils/wdctl.c:261 sys-utils/zramctl.c:488 text-utils/column.c:196
msgid "failed to allocate output table"
msgstr "reserveren van geheugen voor uitvoertabel is mislukt"

#: disk-utils/fdisk-list.c:163 disk-utils/fdisk-list.c:266
#: disk-utils/partx.c:581 login-utils/lslogins.c:976 misc-utils/fincore.c:123
#: misc-utils/findmnt.c:688 misc-utils/findmnt.c:706 misc-utils/lsblk.c:1174
#: misc-utils/lslocks.c:391 sys-utils/losetup.c:333 sys-utils/losetup.c:362
#: sys-utils/lscpu.c:1786 sys-utils/lscpu.c:1814 sys-utils/lsipc.c:470
#: sys-utils/lsipc.c:545 sys-utils/lsipc.c:647 sys-utils/lsipc.c:739
#: sys-utils/lsipc.c:900 sys-utils/prlimit.c:229 sys-utils/swapon.c:176
#: sys-utils/wdctl.c:215 sys-utils/zramctl.c:409 text-utils/column.c:407
msgid "failed to allocate output line"
msgstr "reserveren van geheugen voor uitvoerregel is mislukt"

#: disk-utils/fdisk-list.c:173 disk-utils/fdisk-list.c:273
#: disk-utils/partx.c:644 login-utils/lslogins.c:1074 misc-utils/fincore.c:159
#: misc-utils/findmnt.c:692 misc-utils/findmnt.c:711 misc-utils/lsblk.c:1165
#: misc-utils/lslocks.c:436 sys-utils/losetup.c:294 sys-utils/lscpu.c:1794
#: sys-utils/lscpu.c:1825 sys-utils/lsipc.c:504 sys-utils/lsipc.c:629
#: sys-utils/prlimit.c:261 sys-utils/swapon.c:224 sys-utils/wdctl.c:243
#: sys-utils/zramctl.c:475 text-utils/column.c:413
#, fuzzy
msgid "failed to add output data"
msgstr "toevoegen van gegevens aan uitvoertabel is mislukt"

#: disk-utils/fdisk-list.c:193
#, c-format
msgid "Partition %zu does not start on physical sector boundary."
msgstr "Partitie %zu begint niet op een fysieke sectorgrens."

#: disk-utils/fdisk-list.c:200
#, c-format
msgid "Filesystem/RAID signature on partition %zu will be wiped."
msgstr ""

#: disk-utils/fdisk-list.c:209
msgid "Partition table entries are not in disk order."
msgstr "Partitietabel-items liggen niet in schijfvolgorde."

#: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1017 libfdisk/src/dos.c:2390
#: libfdisk/src/gpt.c:3013 libfdisk/src/sgi.c:1153 libfdisk/src/sun.c:1113
msgid "Start"
msgstr "Begin"

#: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1018 libfdisk/src/dos.c:2391
#: libfdisk/src/gpt.c:3014 libfdisk/src/sgi.c:1154 libfdisk/src/sun.c:1114
msgid "End"
msgstr "Einde"

#: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1019 libfdisk/src/dos.c:2392
#: libfdisk/src/gpt.c:3015 libfdisk/src/sgi.c:1155 libfdisk/src/sun.c:1115
msgid "Sectors"
msgstr "Sectoren"

#: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1021 libfdisk/src/dos.c:2394
#: libfdisk/src/gpt.c:3016 libfdisk/src/sgi.c:1157 libfdisk/src/sun.c:1117
msgid "Size"
msgstr "Grootte"

#: disk-utils/fdisk-list.c:287
#, c-format
msgid "Unpartitioned space %s: %s, %ju bytes, %ju sectors"
msgstr "Ongepartitioneerde ruimte op %s: %s, %ju bytes, %ju sectoren"

#: disk-utils/fdisk-list.c:432
#, c-format
msgid ""
"\n"
"Available columns (for -o):\n"
msgstr ""
"\n"
"Beschikbare kolommen (voor '-o/--output') zijn:\n"

#: disk-utils/fdisk-list.c:473
#, c-format
msgid "%s unknown column: %s"
msgstr "onbekende kolom %2$s voor labeltype %1$s"

#: disk-utils/fdisk-menu.c:95
msgid "Generic"
msgstr "Algemeen"

#: disk-utils/fdisk-menu.c:96
msgid "delete a partition"
msgstr "een partitie verwijderen"

#: disk-utils/fdisk-menu.c:97
msgid "list free unpartitioned space"
msgstr "vrije, ongepartitioneerde ruimte weergeven"

#: disk-utils/fdisk-menu.c:98
msgid "list known partition types"
msgstr "alle bekende partitietypen opsommen"

#: disk-utils/fdisk-menu.c:99
msgid "add a new partition"
msgstr "een nieuwe partitie toevoegen"

#: disk-utils/fdisk-menu.c:100
msgid "print the partition table"
msgstr "de partitietabel weergeven"

#: disk-utils/fdisk-menu.c:101
msgid "change a partition type"
msgstr "een partitietype wijzigen"

#: disk-utils/fdisk-menu.c:102
msgid "verify the partition table"
msgstr "de partitietabel controleren"

#: disk-utils/fdisk-menu.c:103
msgid "print information about a partition"
msgstr "informatie over een partitie weergeven"

#: disk-utils/fdisk-menu.c:105
msgid "print the raw data of the first sector from the device"
msgstr "de rauwe gegevens van de eerste apparaatsector weergeven"

#: disk-utils/fdisk-menu.c:106
msgid "print the raw data of the disklabel from the device"
msgstr "de rauwe gegevens van schijflabel van apparaat weergeven"

#: disk-utils/fdisk-menu.c:107
msgid "fix partitions order"
msgstr "partitievolgorde repareren"

#: disk-utils/fdisk-menu.c:109
msgid "Misc"
msgstr "Varia"

#: disk-utils/fdisk-menu.c:110
msgid "print this menu"
msgstr "dit menu tonen"

#: disk-utils/fdisk-menu.c:111
msgid "change display/entry units"
msgstr "eenheid van weergave/invoer wijzigen"

#: disk-utils/fdisk-menu.c:112
msgid "extra functionality (experts only)"
msgstr "extra functionaliteit (alleen voor experts)"

#: disk-utils/fdisk-menu.c:114
msgid "Script"
msgstr "Script"

#: disk-utils/fdisk-menu.c:115
msgid "load disk layout from sfdisk script file"
msgstr "schijfindeling laden uit een sfdisk-scriptbestand"

#: disk-utils/fdisk-menu.c:116
msgid "dump disk layout to sfdisk script file"
msgstr "schijfindeling opslaan in een sfdisk-scriptbestand"

#: disk-utils/fdisk-menu.c:118
msgid "Save & Exit"
msgstr "Opslaan en afsluiten"

#: disk-utils/fdisk-menu.c:119
msgid "write table to disk and exit"
msgstr "de tabel naar schijf schrijven en afsluiten"

#: disk-utils/fdisk-menu.c:120
msgid "write table to disk"
msgstr "de tabel naar schijf schrijven"

#: disk-utils/fdisk-menu.c:121
msgid "quit without saving changes"
msgstr "afsluiten zonder wijzigingen op te slaan"

#: disk-utils/fdisk-menu.c:122
msgid "return to main menu"
msgstr "terug naar hoofdmenu"

#: disk-utils/fdisk-menu.c:124
msgid "return from BSD to DOS"
msgstr "terugkeren van BSD naar DOS"

#: disk-utils/fdisk-menu.c:135
msgid "Create a new label"
msgstr "Maken van nieuw label"

#: disk-utils/fdisk-menu.c:136
msgid "create a new empty GPT partition table"
msgstr "een nieuwe, lege GPT-partitietabel maken"

#: disk-utils/fdisk-menu.c:137
msgid "create a new empty SGI (IRIX) partition table"
msgstr "een nieuwe, lege SGI(IRIX)-partitietabel maken"

#: disk-utils/fdisk-menu.c:138
msgid "create a new empty DOS partition table"
msgstr "een nieuwe, lege DOS-partitietabel maken"

#: disk-utils/fdisk-menu.c:139
msgid "create a new empty Sun partition table"
msgstr "een nieuwe, lege Sun-partitietabel maken"

#: disk-utils/fdisk-menu.c:143
msgid "create an IRIX (SGI) partition table"
msgstr "een nieuwe, lege IRIX(SGI)-partitietabel maken"

#: disk-utils/fdisk-menu.c:152
msgid "Geometry"
msgstr "Geometrie"

#: disk-utils/fdisk-menu.c:153
msgid "change number of cylinders"
msgstr "aantal cilinders wijzigen"

#: disk-utils/fdisk-menu.c:154
msgid "change number of heads"
msgstr "aantal koppen wijzigen"

#: disk-utils/fdisk-menu.c:155
msgid "change number of sectors/track"
msgstr "aantal sectoren per spoor wijzigen"

#: disk-utils/fdisk-menu.c:164 include/pt-mbr-partnames.h:95
msgid "GPT"
msgstr "GPT"

#: disk-utils/fdisk-menu.c:165
msgid "change disk GUID"
msgstr "schijf-GUID wijzigen"

#: disk-utils/fdisk-menu.c:166
msgid "change partition name"
msgstr "partitienaam wijzigen"

#: disk-utils/fdisk-menu.c:167
msgid "change partition UUID"
msgstr "partitie-UUID wijzigen"

#: disk-utils/fdisk-menu.c:168
msgid "change table length"
msgstr "tabellengte wijzigen"

#: disk-utils/fdisk-menu.c:169
msgid "enter protective/hybrid MBR"
msgstr "beschermende/hybride MBR binnengaan"

#: disk-utils/fdisk-menu.c:172
msgid "toggle the legacy BIOS bootable flag"
msgstr "wel/niet als opstartbaar instellen (verouderde BIOS-vlag)"

#: disk-utils/fdisk-menu.c:173
msgid "toggle the no block IO protocol flag"
msgstr "niet/wel blok-IO-protocol instellen"

#: disk-utils/fdisk-menu.c:174
msgid "toggle the required partition flag"
msgstr "wel/niet als vereiste partitie instellen"

#: disk-utils/fdisk-menu.c:175
msgid "toggle the GUID specific bits"
msgstr "wel/niet de GUID-specifieke bits instellen"

#: disk-utils/fdisk-menu.c:185
msgid "Sun"
msgstr "Sun"

#: disk-utils/fdisk-menu.c:186
msgid "toggle the read-only flag"
msgstr "wel/niet als alleen-lezen instellen"

#: disk-utils/fdisk-menu.c:187
msgid "toggle the mountable flag"
msgstr "wel/niet als aankoppelbaar instellen"

#: disk-utils/fdisk-menu.c:189
msgid "change number of alternate cylinders"
msgstr "aantal alternatieve cilinders wijzigen"

#: disk-utils/fdisk-menu.c:190
msgid "change number of extra sectors per cylinder"
msgstr "aantal extra sectoren per cilinder wijzigen"

#: disk-utils/fdisk-menu.c:191
msgid "change interleave factor"
msgstr "tussenruimtefactor wijzigen"

#: disk-utils/fdisk-menu.c:192
msgid "change rotation speed (rpm)"
msgstr "rotatiesnelheid wijzigen (rondjes per minuut)"

#: disk-utils/fdisk-menu.c:193
msgid "change number of physical cylinders"
msgstr "aantal fysieke cilinders wijzigen"

#: disk-utils/fdisk-menu.c:202
msgid "SGI"
msgstr "SGI"

#: disk-utils/fdisk-menu.c:203
msgid "select bootable partition"
msgstr "opstartbare partitie selecteren"

#: disk-utils/fdisk-menu.c:204
msgid "edit bootfile entry"
msgstr "opstartbestand-item bewerken"

#: disk-utils/fdisk-menu.c:205
msgid "select sgi swap partition"
msgstr "SGI-wisselgeheugenpartitie selecteren"

#: disk-utils/fdisk-menu.c:206
msgid "create SGI info"
msgstr "SGI-info aanmaken"

#: disk-utils/fdisk-menu.c:215
msgid "DOS (MBR)"
msgstr "DOS (MBR)"

# Hierna wordt nog naar een partitienummer gevraagd. -- Benno
#: disk-utils/fdisk-menu.c:216
msgid "toggle a bootable flag"
msgstr "wel/niet als opstartbaar instellen"

#: disk-utils/fdisk-menu.c:217
msgid "edit nested BSD disklabel"
msgstr "genest BSD-schijflabel bewerken"

#: disk-utils/fdisk-menu.c:218
msgid "toggle the dos compatibility flag"
msgstr "wel/niet als DOS-compatibel instellen"

#: disk-utils/fdisk-menu.c:220
msgid "move beginning of data in a partition"
msgstr "begin van gegevens in een partitie verplaatsen"

#: disk-utils/fdisk-menu.c:221
msgid "change the disk identifier"
msgstr "schijf-ID wijzigen"

#: disk-utils/fdisk-menu.c:223
msgid "return from protective/hybrid MBR to GPT"
msgstr "terugkeer uit beschermende/hybride MBR naar GPT"

#: disk-utils/fdisk-menu.c:233
msgid "BSD"
msgstr "BSD"

#: disk-utils/fdisk-menu.c:234
msgid "edit drive data"
msgstr "schijfgegevens bewerken"

#: disk-utils/fdisk-menu.c:235
msgid "install bootstrap"
msgstr "bootstrap installeren"

#: disk-utils/fdisk-menu.c:236
msgid "show complete disklabel"
msgstr "complete schijflabel weergeven"

#: disk-utils/fdisk-menu.c:237
msgid "link BSD partition to non-BSD partition"
msgstr "BSD-partitie koppelen aan niet-BSD-partitie"

#: disk-utils/fdisk-menu.c:369
#, c-format
msgid ""
"\n"
"Help (expert commands):\n"
msgstr ""
"\n"
"Hulp (expertopdrachten):\n"

#: disk-utils/fdisk-menu.c:371 disk-utils/sfdisk.c:1267
#, c-format
msgid ""
"\n"
"Help:\n"
msgstr ""
"\n"
"Hulp:\n"

#: disk-utils/fdisk-menu.c:391
#, c-format
msgid "You're editing nested '%s' partition table, primary partition table is '%s'."
msgstr "U bewerkt een geneste '%s'-partitietabel; de primaire tabel is '%s'."

#: disk-utils/fdisk-menu.c:421
msgid "Expert command (m for help): "
msgstr "Expertopdracht (m voor hulp): "

#: disk-utils/fdisk-menu.c:423
msgid "Command (m for help): "
msgstr "Opdracht (m voor hulp): "

#: disk-utils/fdisk-menu.c:433
#, c-format
msgid "%c: unknown command"
msgstr "%c: onbekende opdracht"

#: disk-utils/fdisk-menu.c:458 disk-utils/fdisk-menu.c:485
msgid "Enter script file name"
msgstr "Voer naam van scriptbestand in"

#: disk-utils/fdisk-menu.c:471
msgid "Script successfully applied."
msgstr "Script is met succes toegepast."

#: disk-utils/fdisk-menu.c:497
msgid "Failed to transform disk layout into script"
msgstr "Omzetten van schijfindeling naar een script is mislukt."

#: disk-utils/fdisk-menu.c:511
msgid "Script successfully saved."
msgstr "Script is met succes opgeslagen."

#: disk-utils/fdisk-menu.c:534 disk-utils/sfdisk.c:1513
#, c-format
msgid "Partition #%zu contains a %s signature."
msgstr "Partitie %zu bevat een %s-vingerafdruk."

#: disk-utils/fdisk-menu.c:537 disk-utils/sfdisk.c:1516
msgid "Do you want to remove the signature?"
msgstr "Wilt u deze vingerafdruk verwijderen?"

#: disk-utils/fdisk-menu.c:542 disk-utils/sfdisk.c:1521
msgid "The signature will be removed by a write command."
msgstr "De vingerafdruk zal gewist worden door een schrijfopdracht."

#: disk-utils/fdisk-menu.c:575
msgid "failed to write disklabel"
msgstr "schrijven van schijflabel is mislukt"

#: disk-utils/fdisk-menu.c:613
msgid "Failed to fix partitions order."
msgstr "Herordenen van partities is mislukt."

#: disk-utils/fdisk-menu.c:615
msgid "Partitions order fixed."
msgstr "De partities zijn herordend."

#: disk-utils/fdisk-menu.c:631
#, c-format
msgid "Could not delete partition %zu"
msgstr "Kan partitie %zu niet verwijderen"

#: disk-utils/fdisk-menu.c:660
msgid "Changing display/entry units to cylinders (DEPRECATED!)."
msgstr "Eenheid voor weergave/invoer is veranderd naar cilinders (VEROUDERD!)."

#: disk-utils/fdisk-menu.c:662
msgid "Changing display/entry units to sectors."
msgstr "Eenheid voor weergave/invoer is veranderd naar sectoren."

#: disk-utils/fdisk-menu.c:672 disk-utils/fdisk-menu.c:842
msgid "Leaving nested disklabel."
msgstr "Verlaten van genest schijflabel."

#: disk-utils/fdisk-menu.c:709
msgid "New maximum entries"
msgstr "Nieuw maximum aantal items"

#: disk-utils/fdisk-menu.c:719
msgid "Entering protective/hybrid MBR disklabel."
msgstr "Binnengaan van beschermend/hybride MBR-schijflabel."

#: disk-utils/fdisk-menu.c:735
msgid "New UUID (in 8-4-4-4-12 format)"
msgstr "Nieuwe UUID (in 8-4-4-4-12-vorm)"

#: disk-utils/fdisk-menu.c:750
msgid "New name"
msgstr "Nieuwe naam"

#: disk-utils/fdisk-menu.c:813
msgid "Entering nested BSD disklabel."
msgstr "Binnengaan van genest BSD-schijflabel."

#: disk-utils/fdisk-menu.c:998
msgid "Number of cylinders"
msgstr "Aantal cilinders"

#: disk-utils/fdisk-menu.c:1002
msgid "Number of heads"
msgstr "Aantal koppen"

#: disk-utils/fdisk-menu.c:1006
msgid "Number of sectors"
msgstr "Aantal sectoren"

#: disk-utils/fsck.c:215
#, c-format
msgid "%s is mounted\n"
msgstr "%s is aangekoppeld\n"

#: disk-utils/fsck.c:217
#, c-format
msgid "%s is not mounted\n"
msgstr "%s is niet aangekoppeld\n"

#: disk-utils/fsck.c:331 disk-utils/fsck.cramfs.c:174
#: disk-utils/fsck.cramfs.c:181 disk-utils/fsck.cramfs.c:235
#: disk-utils/fsck.cramfs.c:253 disk-utils/sfdisk.c:299 libfdisk/src/bsd.c:645
#: lib/path.c:110 lib/path.c:131 lib/path.c:152 lib/path.c:200
#: login-utils/last.c:208 login-utils/last.c:245 login-utils/sulogin.c:655
#: sys-utils/setpriv.c:239 term-utils/setterm.c:724 term-utils/setterm.c:781
#: term-utils/setterm.c:785 term-utils/setterm.c:792
#, c-format
msgid "cannot read %s"
msgstr "kan %s niet lezen"

#: disk-utils/fsck.c:333 lib/path.c:133 lib/path.c:154
#, c-format
msgid "parse error: %s"
msgstr "kan pad niet ontleden: %s"

#: disk-utils/fsck.c:360
#, c-format
msgid "cannot create directory %s"
msgstr "aanmaken van map %s is mislukt"

#: disk-utils/fsck.c:373
#, c-format
msgid "Locking disk by %s ... "
msgstr "Vergrendelen van schijf door %s... "

#: disk-utils/fsck.c:384
#, c-format
msgid "(waiting) "
msgstr "(wachten) "

#. TRANSLATORS: These are followups to "Locking disk...".
#: disk-utils/fsck.c:394
msgid "succeeded"
msgstr "gelukt"

#: disk-utils/fsck.c:394
msgid "failed"
msgstr "mislukt"

#: disk-utils/fsck.c:412
#, c-format
msgid "Unlocking %s.\n"
msgstr "Ontgrendelen van %s.\n"

#: disk-utils/fsck.c:444
#, c-format
msgid "failed to setup description for %s"
msgstr "instellen van van omschrijving voor %s is mislukt"

#: disk-utils/fsck.c:474 misc-utils/findmnt.c:784 misc-utils/lsblk.c:444
#: sys-utils/mount.c:99 sys-utils/swapon-common.c:19 sys-utils/umount.c:45
#, c-format
msgid "%s: parse error at line %d -- ignored"
msgstr "%s: ontledingsfout op regel %d -- is genegeerd"

#: disk-utils/fsck.c:506 disk-utils/fsck.c:508
#, c-format
msgid "%s: failed to parse fstab"
msgstr "%s: ontleden van 'fstab'-bestand is mislukt"

#: disk-utils/fsck.c:679 login-utils/login.c:952 login-utils/sulogin.c:1026
#: login-utils/vipw.c:205 sys-utils/flock.c:343 sys-utils/nsenter.c:181
#: sys-utils/swapon.c:317 sys-utils/unshare.c:219 sys-utils/unshare.c:420
#: term-utils/script.c:788
msgid "fork failed"
msgstr "fork() is mislukt"

#: disk-utils/fsck.c:686
#, c-format
msgid "%s: execute failed"
msgstr "%s: uitvoeren is mislukt"

#: disk-utils/fsck.c:774
msgid "wait: no more child process?!?"
msgstr "wait: Geen dochterprocessen meer?!?"

#: disk-utils/fsck.c:777 sys-utils/flock.c:361 sys-utils/swapon.c:349
#: sys-utils/unshare.c:404 sys-utils/unshare.c:425
msgid "waitpid failed"
msgstr "waitpid() is mislukt"

#: disk-utils/fsck.c:795
#, c-format
msgid "Warning... %s for device %s exited with signal %d."
msgstr "Waarschuwing... %s voor apparaat %s eindigde met signaal %d."

#: disk-utils/fsck.c:801
#, c-format
msgid "%s %s: status is %x, should never happen."
msgstr "%s %s: status is %x -- zou nooit mogen gebeuren."

#: disk-utils/fsck.c:847
#, c-format
msgid "Finished with %s (exit status %d)\n"
msgstr "Klaar met %s (afsluitwaarde %d)\n"

#: disk-utils/fsck.c:925
#, c-format
msgid "error %d (%m) while executing fsck.%s for %s"
msgstr "fout %d (%m) tijdens uitvoeren van 'fsck.%s' voor %s"

#: disk-utils/fsck.c:991
msgid ""
"Either all or none of the filesystem types passed to -t must be prefixed\n"
"with 'no' or '!'."
msgstr ""
"Ofwel alle ofwel geen van de bestandssysteemsoorten bij optie '-t'\n"
"dienen te beginnen met 'no' of '!'."

#: disk-utils/fsck.c:1107
#, c-format
msgid "%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
msgstr ""
"%s: onjuiste regel in /etc/fstab wordt overgeslagen:\n"
"een 'bind'-aankoppeling met een niet-nul fsck-volgordenummer"

#: disk-utils/fsck.c:1119
#, c-format
msgid "%s: skipping nonexistent device\n"
msgstr "%s: niet-bestaand apparaat wordt overgeslagen\n"

#: disk-utils/fsck.c:1124
#, c-format
msgid "%s: nonexistent device (\"nofail\" fstab option may be used to skip this device)\n"
msgstr ""
"%s: niet-bestaand apparaat\n"
"(optie \"nofail\" kan in fstab gebruikt worden om dit apparaat over te slaan)\n"

#: disk-utils/fsck.c:1141
#, c-format
msgid "%s: skipping unknown filesystem type\n"
msgstr "%s: onbekende bestandssysteemsoort wordt overgeslagen\n"

#: disk-utils/fsck.c:1155
#, c-format
msgid "cannot check %s: fsck.%s not found"
msgstr "kan %s niet controleren: geen 'fsck.%s' gevonden"

#: disk-utils/fsck.c:1259
msgid "Checking all file systems.\n"
msgstr "Alle bestandssystemen worden gecontroleerd.\n"

#: disk-utils/fsck.c:1350
#, c-format
msgid "--waiting-- (pass %d)\n"
msgstr "--wachten-- (stap %d)\n"

#: disk-utils/fsck.c:1375
#, c-format
msgid " %s [options] -- [fs-options] [<filesystem> ...]\n"
msgstr "  %s [programmaopties] [-- bestandssysteemopties] [<bestandssyteem>...]\n"

#: disk-utils/fsck.c:1379
msgid "Check and repair a Linux filesystem.\n"
msgstr "Controleert en repareert een Linux-bestandssysteem.\n"

#: disk-utils/fsck.c:1382
msgid " -A         check all filesystems\n"
msgstr "  -A          alle bestandssystemen controleren\n"

#: disk-utils/fsck.c:1383
msgid " -C [<fd>]  display progress bar; file descriptor is for GUIs\n"
msgstr "  -C [<bd>]   voortgangsbalk tonen; de bestandsdescriptor is voor GUI's\n"

#: disk-utils/fsck.c:1384
msgid " -l         lock the device to guarantee exclusive access\n"
msgstr "  -l          het apparaat vergrendelen om exclusieve toegang te garanderen\n"

#: disk-utils/fsck.c:1385
msgid " -M         do not check mounted filesystems\n"
msgstr "  -M          aangekoppelde bestandssystemen niet controleren\n"

#: disk-utils/fsck.c:1386
msgid " -N         do not execute, just show what would be done\n"
msgstr "  -N          niets echt doen, alleen tonen wat er gedaan zou worden\n"

#: disk-utils/fsck.c:1387
msgid " -P         check filesystems in parallel, including root\n"
msgstr "  -P          bestandssystemen parallel controleren, ook het basissysteem\n"

#: disk-utils/fsck.c:1388
msgid " -R         skip root filesystem; useful only with '-A'\n"
msgstr "  -R          het basisbestandssyteem overslaan (alleen nuttig samen met '-A')\n"

#: disk-utils/fsck.c:1389
msgid ""
" -r [<fd>]  report statistics for each device checked;\n"
"            file descriptor is for GUIs\n"
msgstr "  -r [<bs>]   statistieken weergeven voor elke apparaatcontrole;                 (de bestandsdescriptor is voor GUI's)\n"

#: disk-utils/fsck.c:1391
msgid " -s         serialize the checking operations\n"
msgstr "  -s          de controle-acties serialiseren\n"

#: disk-utils/fsck.c:1392
msgid " -T         do not show the title on startup\n"
msgstr "  -T          geen titel tonen bij programmastart\n"

#: disk-utils/fsck.c:1393
msgid ""
" -t <type>  specify filesystem types to be checked;\n"
"            <type> is allowed to be a comma-separated list\n"
msgstr ""
"  -t <soort>  alleen deze bestandssysteemsoorten controleren;\n"
"                <soort> mag een kommagescheiden lijst zijn\n"

#: disk-utils/fsck.c:1395
msgid " -V         explain what is being done\n"
msgstr "  -V          weergeven wat er gedaan wordt\n"

#: disk-utils/fsck.c:1396
msgid " -?         display this help and exit\n"
msgstr "  -?          deze hulptekst tonen en stoppen\n"

#: disk-utils/fsck.c:1399
msgid "See the specific fsck.* commands for available fs-options."
msgstr "Zie de betreffende 'fsck.*'-opdrachten voor bestandssysteemopties."

#: disk-utils/fsck.c:1438
msgid "too many devices"
msgstr "te veel apparaten"

#: disk-utils/fsck.c:1450
msgid "Is /proc mounted?"
msgstr "Is /proc wel aangekoppeld?"

#: disk-utils/fsck.c:1458
#, c-format
msgid "must be root to scan for matching filesystems: %s"
msgstr "U dient root te zijn om naar overeenkomende bestandssystemen te zoeken: %s"

#: disk-utils/fsck.c:1462
#, c-format
msgid "couldn't find matching filesystem: %s"
msgstr "Kan geen overeenkomend bestandssysteem vinden: %s"

#: disk-utils/fsck.c:1470 disk-utils/fsck.c:1565 misc-utils/kill.c:363
#: sys-utils/eject.c:278
msgid "too many arguments"
msgstr "te veel argumenten"

#: disk-utils/fsck.c:1525 disk-utils/fsck.c:1528
msgid "invalid argument of -r"
msgstr "ongeldig argument bij -r"

#: disk-utils/fsck.c:1576
#, c-format
msgid "invalid argument of -r: %d"
msgstr "ongeldig argument bij -r: %d"

#: disk-utils/fsck.c:1618
msgid "the -l option can be used with one device only -- ignore"
msgstr "optie '-l' is alleen geldig bij één apparaat -- genegeerd"

#: disk-utils/fsck.cramfs.c:113
#, c-format
msgid " %s [options] <file>\n"
msgstr "  %s [opties] <bestand>\n"

#: disk-utils/fsck.cramfs.c:116
msgid "Check and repair a compressed ROM filesystem.\n"
msgstr "Controleert en repareert een gecomprimeerd ROM-bestandssysteem.\n"

#: disk-utils/fsck.cramfs.c:119
msgid " -a                       for compatibility only, ignored\n"
msgstr "  -a                       (genegeerd, slechts herkend voor compatibiliteit)\n"

#: disk-utils/fsck.cramfs.c:120
msgid " -v, --verbose            be more verbose\n"
msgstr "  -v, --verbose            gedetailleerdere uitvoer produceren\n"

#: disk-utils/fsck.cramfs.c:121
msgid " -y                       for compatibility only, ignored\n"
msgstr "  -y                       (genegeerd, slechts herkend voor compatibiliteit)\n"

#: disk-utils/fsck.cramfs.c:122
msgid " -b, --blocksize <size>   use this blocksize, defaults to page size\n"
msgstr "  -b, --blocksize <getal>  te gebruiken blokgrootte; standaard is paginagrootte\n"

#: disk-utils/fsck.cramfs.c:123
msgid "     --extract[=<dir>]    test uncompression, optionally extract into <dir>\n"
msgstr "      --extract[=<map>]    decompressie testen (uitpakken in gegeven <map>)\n"

#: disk-utils/fsck.cramfs.c:161
#, c-format
msgid "ioctl failed: unable to determine device size: %s"
msgstr "ioctl() is mislukt: kan grootte van apparaat niet achterhalen: %s"

#: disk-utils/fsck.cramfs.c:167
#, c-format
msgid "not a block device or file: %s"
msgstr "is geen blok-apparaat noch bestand: %s"

#: disk-utils/fsck.cramfs.c:170 disk-utils/fsck.cramfs.c:206
msgid "file length too short"
msgstr "bestandslengte is te klein"

#: disk-utils/fsck.cramfs.c:179 disk-utils/fsck.cramfs.c:233
#: disk-utils/fsck.cramfs.c:249 libfdisk/src/bsd.c:717 libfdisk/src/bsd.c:892
#: login-utils/last.c:203 login-utils/last.c:237 sys-utils/fallocate.c:221
#, c-format
msgid "seek on %s failed"
msgstr "'seek' op %s is mislukt"

#: disk-utils/fsck.cramfs.c:185 disk-utils/fsck.cramfs.c:187
msgid "superblock magic not found"
msgstr "geen magisch getal van superblok gevonden"

#: disk-utils/fsck.cramfs.c:190
#, c-format
msgid "cramfs endianness is %s\n"
msgstr "deze cramfs is %s\n"

#: disk-utils/fsck.cramfs.c:191
msgid "big"
msgstr "big endian"

#: disk-utils/fsck.cramfs.c:191
msgid "little"
msgstr "little endian"

#: disk-utils/fsck.cramfs.c:195
msgid "unsupported filesystem features"
msgstr "niet-ondersteunde bestandssysteemfuncties"

#: disk-utils/fsck.cramfs.c:199
#, c-format
msgid "superblock size (%d) too small"
msgstr "grootte (%d) van superblok is te klein"

#: disk-utils/fsck.cramfs.c:204
msgid "zero file count"
msgstr "nul bestanden geteld"

#: disk-utils/fsck.cramfs.c:208
msgid "file extends past end of filesystem"
msgstr "bestand loopt door tot voorbij het einde van het bestandssysteem"

#: disk-utils/fsck.cramfs.c:210
msgid "old cramfs format"
msgstr "oude cramfs-indeling"

#: disk-utils/fsck.cramfs.c:219
msgid "unable to test CRC: old cramfs format"
msgstr "kan controlesom niet testen: oude cramfs-indeling"

#: disk-utils/fsck.cramfs.c:272
msgid "crc error"
msgstr "foutieve controlesom"

#: disk-utils/fsck.cramfs.c:302 disk-utils/fsck.minix.c:560
msgid "seek failed"
msgstr "'seek' is mislukt"

#: disk-utils/fsck.cramfs.c:306
msgid "read romfs failed"
msgstr "lezen van ROM-FS is mislukt"

#: disk-utils/fsck.cramfs.c:338
msgid "root inode is not directory"
msgstr "hoofd-inode is geen map"

#: disk-utils/fsck.cramfs.c:342
#, c-format
msgid "bad root offset (%lu)"
msgstr "foutieve positie (%lu) van hoofdmap"

#: disk-utils/fsck.cramfs.c:360
msgid "data block too large"
msgstr "datablok is te groot"

#: disk-utils/fsck.cramfs.c:364
#, c-format
msgid "decompression error: %s"
msgstr "decompressiefout: %s"

#: disk-utils/fsck.cramfs.c:390
#, c-format
msgid "  hole at %lu (%zu)\n"
msgstr "  gat op %lu (%zu)\n"

#: disk-utils/fsck.cramfs.c:397 disk-utils/fsck.cramfs.c:550
#, c-format
msgid "  uncompressing block at %lu to %lu (%lu)\n"
msgstr "  decomprimeren van blok op %lu naar %lu (%lu)\n"

# FIXME: what is this?
#: disk-utils/fsck.cramfs.c:404
#, c-format
msgid "non-block (%ld) bytes"
msgstr "geen blok (%ld bytes)"

#: disk-utils/fsck.cramfs.c:408
#, c-format
msgid "non-size (%ld vs %ld) bytes"
msgstr "onjuiste grootte (%ld i.p.v. %ld bytes)"

#: disk-utils/fsck.cramfs.c:413 disk-utils/fsck.cramfs.c:516
#: disk-utils/swaplabel.c:104 misc-utils/uuidd.c:375 sys-utils/fallocate.c:417
#: sys-utils/setpriv.c:535 sys-utils/setpriv.c:558 sys-utils/swapon.c:390
#: term-utils/ttymsg.c:175
#, c-format
msgid "write failed: %s"
msgstr "schrijven is mislukt: %s"

#: disk-utils/fsck.cramfs.c:424
#, c-format
msgid "lchown failed: %s"
msgstr "'lchown' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:428
#, c-format
msgid "chown failed: %s"
msgstr "'chown' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:433
#, c-format
msgid "utime failed: %s"
msgstr "'utime' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:445
#, c-format
msgid "directory inode has zero offset and non-zero size: %s"
msgstr "map-inode %s heeft positie nul en niet-nul grootte"

#: disk-utils/fsck.cramfs.c:460
#, c-format
msgid "mkdir failed: %s"
msgstr "'mkdir' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:476
msgid "filename length is zero"
msgstr "lengte van bestandsnaam is nul"

#: disk-utils/fsck.cramfs.c:478
msgid "bad filename length"
msgstr "ongeldige lengte van bestandsnaam "

#: disk-utils/fsck.cramfs.c:484
msgid "bad inode offset"
msgstr "ongeldige inode-positie"

#: disk-utils/fsck.cramfs.c:499
msgid "file inode has zero offset and non-zero size"
msgstr "bestands-inode heeft positie nul en niet-nul grootte"

#: disk-utils/fsck.cramfs.c:502
msgid "file inode has zero size and non-zero offset"
msgstr "bestands-inode heeft grootte nul en niet-nul positie"

#: disk-utils/fsck.cramfs.c:531
msgid "symbolic link has zero offset"
msgstr "symbolische koppeling heeft positie nul"

#: disk-utils/fsck.cramfs.c:533
msgid "symbolic link has zero size"
msgstr "symbolische koppeling heeft grootte nul"

#: disk-utils/fsck.cramfs.c:542
#, c-format
msgid "size error in symlink: %s"
msgstr "foutieve grootte in symbolische koppeling: %s"

#: disk-utils/fsck.cramfs.c:556
#, c-format
msgid "symlink failed: %s"
msgstr "symbolische koppeling is mislukt: %s"

#: disk-utils/fsck.cramfs.c:569
#, c-format
msgid "special file has non-zero offset: %s"
msgstr "speciaal bestand heeft niet-nul positie: %s"

#: disk-utils/fsck.cramfs.c:579
#, c-format
msgid "fifo has non-zero size: %s"
msgstr "fifo heeft niet lengte nul: %s"

#: disk-utils/fsck.cramfs.c:585
#, c-format
msgid "socket has non-zero size: %s"
msgstr "socket heeft niet lengte nul: %s"

#: disk-utils/fsck.cramfs.c:588
#, c-format
msgid "bogus mode: %s (%o)"
msgstr "ongeldige modus: %s (%o)"

#: disk-utils/fsck.cramfs.c:597
#, c-format
msgid "mknod failed: %s"
msgstr "'mknod' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:629
#, c-format
msgid "directory data start (%lu) < sizeof(struct cramfs_super) + start (%zu)"
msgstr "begin van mapdata (%lu) is kleiner dan sizeof(struct cramfs_super) plus start (%zu)"

#: disk-utils/fsck.cramfs.c:633
#, c-format
msgid "directory data end (%lu) != file data start (%lu)"
msgstr "einde van mapdata (%lu) is ongelijk aan begin van bestandsdata (%lu)"

#: disk-utils/fsck.cramfs.c:637
msgid "invalid file data offset"
msgstr "ongeldige positie van bestandsgegevens"

#: disk-utils/fsck.cramfs.c:684 disk-utils/mkfs.cramfs.c:726
msgid "invalid blocksize argument"
msgstr "ongeldige blokgrootte"

#: disk-utils/fsck.cramfs.c:705
#, c-format
msgid "%s: OK\n"
msgstr "%s: OK\n"

#: disk-utils/fsck.minix.c:184
msgid "Check the consistency of a Minix filesystem.\n"
msgstr "Controleert een Minix-bestandssysteem.\n"

#: disk-utils/fsck.minix.c:186
msgid " -l, --list       list all filenames\n"
msgstr "  -l, --list         alle bestandsnamen tonen\n"

#: disk-utils/fsck.minix.c:187
msgid " -a, --auto       automatic repair\n"
msgstr "  -a, --auto         automatisch repareren\n"

#: disk-utils/fsck.minix.c:188
msgid " -r, --repair     interactive repair\n"
msgstr "  -r, --repair       interactief repareren\n"

#: disk-utils/fsck.minix.c:189
msgid " -v, --verbose    be verbose\n"
msgstr "  -v, --verbose      gedetailleerde uitvoer produceren\n"

#: disk-utils/fsck.minix.c:190
msgid " -s, --super      output super-block information\n"
msgstr "  -s, --super        informatie over superblok tonen\n"

#: disk-utils/fsck.minix.c:191
msgid " -m, --uncleared  activate mode not cleared warnings\n"
msgstr "  -m, --uncleared    melding geven wanneer modus niet gewist werd\n"

#: disk-utils/fsck.minix.c:192
msgid " -f, --force      force check\n"
msgstr "  -f, --force        controle afdwingen\n"

#. TRANSLATORS: these yes no questions uses rpmatch(), and should be
#. * translated.
#: disk-utils/fsck.minix.c:252
#, c-format
msgid "%s (y/n)? "
msgstr "%s (j/n)? "

#: disk-utils/fsck.minix.c:252
#, c-format
msgid "%s (n/y)? "
msgstr "%s (n/j)? "

#: disk-utils/fsck.minix.c:269
#, c-format
msgid "y\n"
msgstr "j\n"

#: disk-utils/fsck.minix.c:271
#, c-format
msgid "n\n"
msgstr "n\n"

#: disk-utils/fsck.minix.c:287
#, c-format
msgid "%s is mounted.\t "
msgstr "%s is aangekoppeld.\t "

#: disk-utils/fsck.minix.c:289
msgid "Do you really want to continue"
msgstr "Wilt u echt doorgaan"

#: disk-utils/fsck.minix.c:293
#, c-format
msgid "check aborted.\n"
msgstr "De controle is afgebroken.\n"

# FIXME: backtick
#: disk-utils/fsck.minix.c:319 disk-utils/fsck.minix.c:340
#, c-format
msgid "Zone nr < FIRSTZONE in file `%s'."
msgstr "Zonenummer < EERSTEZONE in bestand '%s'."

# FIXME: backtick
#: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:343
#, c-format
msgid "Zone nr >= ZONES in file `%s'."
msgstr "Zonenummer >= ZONES in bestand '%s'."

#: disk-utils/fsck.minix.c:326 disk-utils/fsck.minix.c:347
msgid "Remove block"
msgstr "Blok verwijderen"

#: disk-utils/fsck.minix.c:363
#, c-format
msgid "Read error: unable to seek to block in file '%s'\n"
msgstr "Leesfout: kan geen 'seek' doen naar blok in bestand '%s'\n"

#: disk-utils/fsck.minix.c:369
#, c-format
msgid "Read error: bad block in file '%s'\n"
msgstr "Leesfout: slecht blok in bestand '%s'\n"

#: disk-utils/fsck.minix.c:381
#, c-format
msgid ""
"Internal error: trying to write bad block\n"
"Write request ignored\n"
msgstr ""
"**Interne programmafout**: poging tot schrijven naar een slecht blok.\n"
"Het schrijfverzoek is genegeerd.\n"

#: disk-utils/fsck.minix.c:387
msgid "seek failed in write_block"
msgstr "'seek' is mislukt in write_block()"

#: disk-utils/fsck.minix.c:390
#, c-format
msgid "Write error: bad block in file '%s'\n"
msgstr "Schrijffout: slecht blok in bestand '%s'\n"

#: disk-utils/fsck.minix.c:424
#, fuzzy, c-format
msgid "Warning: block out of range\n"
msgstr "Waarschuwing: het aantal inodes is te groot.\n"

#: disk-utils/fsck.minix.c:511
msgid "seek failed in write_super_block"
msgstr "'seek' is mislukt in write_super_block()"

#: disk-utils/fsck.minix.c:513
msgid "unable to write super-block"
msgstr "kan superblok niet schrijven"

#: disk-utils/fsck.minix.c:526
msgid "Unable to write inode map"
msgstr "kan inode-kaart niet schrijven"

#: disk-utils/fsck.minix.c:529
msgid "Unable to write zone map"
msgstr "kan zone-kaart niet schrijven"

#: disk-utils/fsck.minix.c:532
msgid "Unable to write inodes"
msgstr "kan inodes niet schrijven"

#: disk-utils/fsck.minix.c:564
msgid "unable to alloc buffer for superblock"
msgstr "reserveren van buffer voor superblok is mislukt"

#: disk-utils/fsck.minix.c:567
msgid "unable to read super block"
msgstr "kan superblok niet lezen"

#: disk-utils/fsck.minix.c:589
msgid "bad magic number in super-block"
msgstr "ongeldig magisch getal in superblok"

#: disk-utils/fsck.minix.c:591
msgid "Only 1k blocks/zones supported"
msgstr "Alleen blokken/zones van 1K zijn mogelijk"

#: disk-utils/fsck.minix.c:593
msgid "bad s_ninodes field in super-block"
msgstr "ongeldig 's_ninodes'-veld in superblok"

#: disk-utils/fsck.minix.c:595
msgid "bad s_imap_blocks field in super-block"
msgstr "ongeldig 's_imap_blocks'-veld in superblok"

#: disk-utils/fsck.minix.c:597
msgid "bad s_firstdatazone field in super-block"
msgstr "ongeldig 's_firstdatazone'-veld in superblok"

#: disk-utils/fsck.minix.c:600
msgid "bad s_zmap_blocks field in super-block"
msgstr "ongeldig 's_zmap_blocks'-veld in superblok"

#: disk-utils/fsck.minix.c:616
msgid "Unable to allocate buffer for inode map"
msgstr "Kan geen buffer reserveren voor inode-kaart"

#: disk-utils/fsck.minix.c:619
msgid "Unable to allocate buffer for zone map"
msgstr "Kan geen buffer reserveren voor zone-kaart"

#: disk-utils/fsck.minix.c:622
msgid "Unable to allocate buffer for inodes"
msgstr "Kan geen buffer reserveren voor inodes"

#: disk-utils/fsck.minix.c:625
msgid "Unable to allocate buffer for inode count"
msgstr "Kan geen buffer reserveren voor inode-aantallen"

#: disk-utils/fsck.minix.c:628
msgid "Unable to allocate buffer for zone count"
msgstr "Kan geen buffer reserveren voor zone-aantallen"

#: disk-utils/fsck.minix.c:632
msgid "Unable to read inode map"
msgstr "Kan inode-kaart niet lezen"

#: disk-utils/fsck.minix.c:636
msgid "Unable to read zone map"
msgstr "Kan zone-kaart niet lezen"

#: disk-utils/fsck.minix.c:640
msgid "Unable to read inodes"
msgstr "Kan inodes niet lezen"

#: disk-utils/fsck.minix.c:642
#, c-format
msgid "Warning: Firstzone != Norm_firstzone\n"
msgstr "Waarschuwing: EersteZone != NormaleEersteZone\n"

#: disk-utils/fsck.minix.c:647
#, c-format
msgid "%ld inodes\n"
msgstr "%ld inodes\n"

#: disk-utils/fsck.minix.c:648
#, c-format
msgid "%ld blocks\n"
msgstr "%ld blokken\n"

#: disk-utils/fsck.minix.c:649 disk-utils/mkfs.minix.c:566
#, c-format
msgid "Firstdatazone=%jd (%jd)\n"
msgstr "EersteGegevensZone=%jd (%jd)\n"

#: disk-utils/fsck.minix.c:651
#, c-format
msgid "Zonesize=%d\n"
msgstr "ZoneGrootte=%d\n"

#: disk-utils/fsck.minix.c:652
#, c-format
msgid "Maxsize=%zu\n"
msgstr "MaxGrootte=%zu\n"

#: disk-utils/fsck.minix.c:654
#, c-format
msgid "Filesystem state=%d\n"
msgstr "Bestandssysteemstatus=%d\n"

#: disk-utils/fsck.minix.c:655
#, c-format
msgid ""
"namelen=%zd\n"
"\n"
msgstr ""
"naamlengte=%zd\n"
"\n"

#: disk-utils/fsck.minix.c:670 disk-utils/fsck.minix.c:720
#, c-format
msgid "Inode %d marked unused, but used for file '%s'\n"
msgstr "Inode %d is gemarkeerd als ongebruikt, maar wordt gebruikt door bestand '%s'.\n"

#: disk-utils/fsck.minix.c:673 disk-utils/fsck.minix.c:723
msgid "Mark in use"
msgstr "Markeren als gebruikt"

# FIXME: backtick
#: disk-utils/fsck.minix.c:695 disk-utils/fsck.minix.c:743
#, c-format
msgid "The file `%s' has mode %05o\n"
msgstr "Het bestand '%s' heeft modus %05o\n"

#: disk-utils/fsck.minix.c:702 disk-utils/fsck.minix.c:749
#, c-format
msgid "Warning: inode count too big.\n"
msgstr "Waarschuwing: het aantal inodes is te groot.\n"

#: disk-utils/fsck.minix.c:761 disk-utils/fsck.minix.c:769
msgid "root inode isn't a directory"
msgstr "hoofd-inode is geen map"

# FIXME: backtick
#: disk-utils/fsck.minix.c:781 disk-utils/fsck.minix.c:812
#, c-format
msgid "Block has been used before. Now in file `%s'."
msgstr "Blok is al eerder gebruikt.  Nu in bestand '%s'."

#: disk-utils/fsck.minix.c:783 disk-utils/fsck.minix.c:814
#: disk-utils/fsck.minix.c:1149 disk-utils/fsck.minix.c:1158
#: disk-utils/fsck.minix.c:1205 disk-utils/fsck.minix.c:1214
msgid "Clear"
msgstr "Wissen"

# FIXME: backtick
#: disk-utils/fsck.minix.c:793 disk-utils/fsck.minix.c:824
#, c-format
msgid "Block %d in file `%s' is marked not in use."
msgstr "Blok %d in bestand '%s' is gemarkeerd als ongebruikt."

#: disk-utils/fsck.minix.c:795 disk-utils/fsck.minix.c:826
msgid "Correct"
msgstr "Corrigeren"

#: disk-utils/fsck.minix.c:965 disk-utils/fsck.minix.c:1039
#, c-format
msgid "The directory '%s' contains a bad inode number for file '%.*s'."
msgstr "De map '%s' bevat een ongeldig inode-nummer voor bestand '%.*s'."

#: disk-utils/fsck.minix.c:967 disk-utils/fsck.minix.c:1041
msgid " Remove"
msgstr " Verwijderen"

#: disk-utils/fsck.minix.c:983 disk-utils/fsck.minix.c:1057
#, c-format
msgid "%s: bad directory: '.' isn't first\n"
msgstr "%s: ongeldige map: '.' is niet eerste\n"

#: disk-utils/fsck.minix.c:992 disk-utils/fsck.minix.c:1066
#, c-format
msgid "%s: bad directory: '..' isn't second\n"
msgstr "%s: ongeldige map: '..' is niet tweede\n"

#: disk-utils/fsck.minix.c:1100 disk-utils/fsck.minix.c:1123
msgid "internal error"
msgstr "**interne programmafout**"

#: disk-utils/fsck.minix.c:1103 disk-utils/fsck.minix.c:1126
#, c-format
msgid "%s: bad directory: size < 32"
msgstr "%s: ongeldige map: grootte < 32"

#: disk-utils/fsck.minix.c:1109
#, c-format
msgid "%s: bad directory: invalid i_zone, use --repair to fix\n"
msgstr "%s: ongeldige map: ongeldige 'i_zone'; gebruik '--repair' om te herstellen\n"

#: disk-utils/fsck.minix.c:1138
msgid "seek failed in bad_zone"
msgstr "'seek' is mislukt in bad_zone()"

#: disk-utils/fsck.minix.c:1148 disk-utils/fsck.minix.c:1204
#, c-format
msgid "Inode %lu mode not cleared."
msgstr "Modus van inode %lu is niet gewist."

#: disk-utils/fsck.minix.c:1157 disk-utils/fsck.minix.c:1213
#, c-format
msgid "Inode %lu not used, marked used in the bitmap."
msgstr "Inode %lu is ongebruikt, maar gemarkeerd als gebruikt in de bitkaart."

#: disk-utils/fsck.minix.c:1163 disk-utils/fsck.minix.c:1219
#, c-format
msgid "Inode %lu used, marked unused in the bitmap."
msgstr "Inode %lu is gebruikt, maar niet als zodanig gemarkeerd in de bitkaart."

#: disk-utils/fsck.minix.c:1164 disk-utils/fsck.minix.c:1220
msgid "Set"
msgstr "Markeren"

#: disk-utils/fsck.minix.c:1168 disk-utils/fsck.minix.c:1224
#, c-format
msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
msgstr "Inode %lu (modus = %07o), i_nlinks=%d, geteld=%d."

#: disk-utils/fsck.minix.c:1171 disk-utils/fsck.minix.c:1227
msgid "Set i_nlinks to count"
msgstr "i_nlinks op geteld aantal instellen"

#: disk-utils/fsck.minix.c:1183 disk-utils/fsck.minix.c:1239
#, c-format
msgid "Zone %lu: marked in use, no file uses it."
msgstr "Zone %lu is gemarkeerd als in gebruik, maar geen bestand gebruikt het."

#: disk-utils/fsck.minix.c:1185 disk-utils/fsck.minix.c:1241
msgid "Unmark"
msgstr "Markering verwijderen"

#: disk-utils/fsck.minix.c:1190 disk-utils/fsck.minix.c:1246
#, c-format
msgid "Zone %lu: in use, counted=%d\n"
msgstr "Zone %lu: in gebruik, geteld=%d\n"

#: disk-utils/fsck.minix.c:1193 disk-utils/fsck.minix.c:1249
#, c-format
msgid "Zone %lu: not in use, counted=%d\n"
msgstr "Zone %lu: niet in gebruik, geteld=%d\n"

#: disk-utils/fsck.minix.c:1297
msgid "bad inode size"
msgstr "ongeldige inode-grootte"

#: disk-utils/fsck.minix.c:1299
msgid "bad v2 inode size"
msgstr "ongeldige v2-inode-grootte"

#: disk-utils/fsck.minix.c:1343
msgid "need terminal for interactive repairs"
msgstr "voor interactieve reparaties is een terminal vereist"

#: disk-utils/fsck.minix.c:1347
#, c-format
msgid "cannot open %s: %s"
msgstr "kan %s niet openen: %s"

#: disk-utils/fsck.minix.c:1358
#, c-format
msgid "%s is clean, no check.\n"
msgstr "%s is schoon, geen controle.\n"

#: disk-utils/fsck.minix.c:1361
#, c-format
msgid "Forcing filesystem check on %s.\n"
msgstr "Gedwongen bestandssysteemcontrole van %s.\n"

#: disk-utils/fsck.minix.c:1363
#, c-format
msgid "Filesystem on %s is dirty, needs checking.\n"
msgstr "Bestandssysteem op %s is vervuild, een controle is nodig.\n"

#: disk-utils/fsck.minix.c:1395
#, c-format
msgid ""
"\n"
"%6ld inodes used (%ld%%)\n"
msgstr ""
"\n"
"%6ld inodes gebruikt (%ld%%)\n"

#: disk-utils/fsck.minix.c:1401
#, c-format
msgid "%6ld zones used (%ld%%)\n"
msgstr "%6ld zones gebruikt (%ld%%)\n"

#: disk-utils/fsck.minix.c:1403
#, c-format
msgid ""
"\n"
"%6d regular files\n"
"%6d directories\n"
"%6d character device files\n"
"%6d block device files\n"
"%6d links\n"
"%6d symbolic links\n"
"------\n"
"%6d files\n"
msgstr ""
"\n"
"%6d gewone bestanden\n"
"%6d mappen\n"
"%6d byte-apparaten\n"
"%6d blok-apparaten\n"
"%6d koppelingen\n"
"%6d symbolische koppelingen\n"
"------\n"
"%6d bestanden\n"

#: disk-utils/fsck.minix.c:1417
#, c-format
msgid ""
"----------------------------\n"
"FILE SYSTEM HAS BEEN CHANGED\n"
"----------------------------\n"
msgstr ""
"----------------------------\n"
"BESTANDSSYSTEEM IS VERANDERD\n"
"----------------------------\n"

#: disk-utils/fsck.minix.c:1429 disk-utils/mkfs.minix.c:833
#: disk-utils/mkswap.c:539 disk-utils/partx.c:1058 disk-utils/resizepart.c:112
#: login-utils/utmpdump.c:393 sys-utils/dmesg.c:659 sys-utils/wdctl.c:348
#: sys-utils/wdctl.c:413 term-utils/script.c:273 term-utils/script.c:350
#: term-utils/setterm.c:888 text-utils/pg.c:1248
msgid "write failed"
msgstr "schrijven is mislukt"

#: disk-utils/isosize.c:136
#, c-format
msgid "%s: might not be an ISO filesystem"
msgstr "%s: is misschien geen ISO-bestandssysteem"

#: disk-utils/isosize.c:139
#, c-format
msgid "seek error on %s"
msgstr "'seek'-fout in %s"

#: disk-utils/isosize.c:142
#, c-format
msgid "read error on %s"
msgstr "leesfout in %s"

#: disk-utils/isosize.c:151
#, c-format
msgid "sector count: %d, sector size: %d\n"
msgstr "aantal sectoren: %d, sectorgrootte: %d\n"

#: disk-utils/isosize.c:170
#, c-format
msgid " %s [options] <iso9660_image_file>\n"
msgstr "  %s [opties] <ISO9660-bestand>\n"

#: disk-utils/isosize.c:174
msgid "Show the length of an ISO-9660 filesystem.\n"
msgstr "Toont de lengte van een ISO-9660-bestandssysteem.\n"

#: disk-utils/isosize.c:177
msgid " -d, --divisor=<number>  divide the amount of bytes by <number>\n"
msgstr "  -d, --divisor=<getal>  de lengte van het ISO-bestand door <getal> delen\n"

#: disk-utils/isosize.c:178
msgid " -x, --sectors           show sector count and size\n"
msgstr "  -x, --sectors          het aantal sectoren en de sectorgrootte tonen\n"

#: disk-utils/isosize.c:210
msgid "invalid divisor argument"
msgstr "ongeldige deler"

#: disk-utils/mkfs.bfs.c:73
#, c-format
msgid "Usage: %s [options] device [block-count]\n"
msgstr "Gebruik:  %s [opties] apparaat [blokkenaantal]\n"

#: disk-utils/mkfs.bfs.c:77
msgid "Make an SCO bfs filesystem.\n"
msgstr "Maakt een SCO BFS-bestandssysteem aan.\n"

#: disk-utils/mkfs.bfs.c:79
#, c-format
msgid ""
"\n"
"Options:\n"
" -N, --inodes=NUM    specify desired number of inodes\n"
" -V, --vname=NAME    specify volume name\n"
" -F, --fname=NAME    specify file system name\n"
" -v, --verbose       explain what is being done\n"
" -c                  this option is silently ignored\n"
" -l                  this option is silently ignored\n"
" -V, --version       output version information and exit\n"
"                     -V as version must be only option\n"
" -h, --help          display this help and exit\n"
"\n"
msgstr ""
"\n"
"Opties:\n"
"  -N, --inodes=GETAL  te gebruiken aantal inodes\n"
"  -V, --vname=NAAM    te gebruiken volumennaam\n"
"  -F, --fname=NAAM    te gebruiken bestandssysteemnaam\n"
"  -v, --verbose       weergeven wat er gedaan wordt\n"
"  -c                  (deze optie wordt stilzwijgend genegeerd)\n"
"  -l                  (deze optie wordt stilzwijgend genegeerd)\n"
"  -V, --version       programmaversie tonen en stoppen; hiervoor\n"
"                        moet '-V' de enige optie zijn\n"
"  -h, --help          deze hulptekst tonen en stoppen\n"
"\n"

#: disk-utils/mkfs.bfs.c:144
msgid "invalid number of inodes"
msgstr "ongeldig aantal inodes"

#: disk-utils/mkfs.bfs.c:150
msgid "volume name too long"
msgstr "volumennaam is te lang"

#: disk-utils/mkfs.bfs.c:157
msgid "fsname name too long"
msgstr "bestandssysteemnaam is te lang"

#: disk-utils/mkfs.bfs.c:193
msgid "invalid block-count"
msgstr "ongeldige blokkenaantal"

#: disk-utils/mkfs.bfs.c:199
#, c-format
msgid "cannot get size of %s"
msgstr "kan grootte van %s niet achterhalen"

#: disk-utils/mkfs.bfs.c:204
#, c-format
msgid "blocks argument too large, max is %llu"
msgstr "argument voor blokken is te groot -- maximum is %llu"

#: disk-utils/mkfs.bfs.c:219
msgid "too many inodes - max is 512"
msgstr "te veel inodes -- maximum is 512"

#: disk-utils/mkfs.bfs.c:229
#, c-format
msgid "not enough space, need at least %llu blocks"
msgstr "niet genoeg ruimte: minstens %llu blokken nodig"

#: disk-utils/mkfs.bfs.c:241
#, c-format
msgid "Device: %s\n"
msgstr "Apparaat: %s\n"

#: disk-utils/mkfs.bfs.c:242
#, c-format
msgid "Volume: <%-6s>\n"
msgstr "Volumen: <%-6s>\n"

#: disk-utils/mkfs.bfs.c:243
#, c-format
msgid "FSname: <%-6s>\n"
msgstr "Bestandssysteemnaam: <%-6s>\n"

#: disk-utils/mkfs.bfs.c:244
#, c-format
msgid "BlockSize: %d\n"
msgstr "Blokgrootte: %d\n"

#: disk-utils/mkfs.bfs.c:246
#, c-format
msgid "Inodes: %ld (in 1 block)\n"
msgstr "Inodes: %ld (in 1 blok)\n"

#: disk-utils/mkfs.bfs.c:249
#, c-format
msgid "Inodes: %ld (in %llu blocks)\n"
msgstr "Inodes: %ld (in %llu blokken)\n"

#: disk-utils/mkfs.bfs.c:251
#, c-format
msgid "Blocks: %llu\n"
msgstr "Blokken: %llu\n"

#: disk-utils/mkfs.bfs.c:252
#, c-format
msgid "Inode end: %d, Data end: %d\n"
msgstr "Inode-einde: %d, Gegevenseinde: %d\n"

#: disk-utils/mkfs.bfs.c:257
msgid "error writing superblock"
msgstr "fout bij schrijven van superblok"

#: disk-utils/mkfs.bfs.c:278
msgid "error writing root inode"
msgstr "fout bij schrijven van eerste inode"

#: disk-utils/mkfs.bfs.c:283
msgid "error writing inode"
msgstr "fout bij schrijven van inode"

#: disk-utils/mkfs.bfs.c:286
msgid "seek error"
msgstr "'seek'-fout"

#: disk-utils/mkfs.bfs.c:292
msgid "error writing . entry"
msgstr "fout bij schrijven van .-item"

#: disk-utils/mkfs.bfs.c:296
msgid "error writing .. entry"
msgstr "fout bij schrijven van ..-item"

#: disk-utils/mkfs.bfs.c:299
#, c-format
msgid "error closing %s"
msgstr "fout bij sluiten van %s"

#: disk-utils/mkfs.c:44
#, c-format
msgid " %s [options] [-t <type>] [fs-options] <device> [<size>]\n"
msgstr ""
"  %s [opties] [-t <bestandssysteemsoort>] [bestandssysteemopties]\n"
"               <apparaat> [<grootte>]\n"

#: disk-utils/mkfs.c:48
msgid "Make a Linux filesystem.\n"
msgstr "Maakt een Linux-bestandssysteem aan.\n"

#: disk-utils/mkfs.c:51
#, c-format
msgid " -t, --type=<type>  filesystem type; when unspecified, ext2 is used\n"
msgstr "  -t, --type=<soort>  bestandssysteemsoort (wanneer niet gegeven: ext2)\n"

#: disk-utils/mkfs.c:52
#, c-format
msgid "     fs-options     parameters for the real filesystem builder\n"
msgstr "      bs-opties       argumenten voor de feitelijke bestandsysteemmaker\n"

#: disk-utils/mkfs.c:53
#, c-format
msgid "     <device>       path to the device to be used\n"
msgstr "     <apparaat>       pad naar te gebruiken apparaat\n"

#: disk-utils/mkfs.c:54
#, c-format
msgid "     <size>         number of blocks to be used on the device\n"
msgstr "      <grootte>       aantal te gebruiken blokken op het apparaat\n"

#: disk-utils/mkfs.c:55
#, c-format
msgid ""
" -V, --verbose      explain what is being done;\n"
"                      specifying -V more than once will cause a dry-run\n"
msgstr ""
"  -V, --verbose       weergeven wat er gedaan wordt;\n"
"                        meerdere '-V's veroorzaken een effectloos doen-alsof\n"

#: disk-utils/mkfs.c:57
#, c-format
msgid ""
" -V, --version      display version information and exit;\n"
"                      -V as --version must be the only option\n"
msgstr ""
"  -V, --version       programmaversie tonen en stoppen;\n"
"                        hiervoor moet '-V' de enige optie zijn\n"

#: disk-utils/mkfs.c:59
#, c-format
msgid " -h, --help         display this help text and exit\n"
msgstr "  -h, --help          deze hulptekst tonen en stoppen\n"

#: disk-utils/mkfs.c:139 lib/exec_shell.c:49 login-utils/newgrp.c:239
#: login-utils/su-common.c:648 login-utils/su-common.c:989
#: login-utils/sulogin.c:791 login-utils/sulogin.c:795 schedutils/chrt.c:555
#: schedutils/ionice.c:260 schedutils/taskset.c:245 sys-utils/flock.c:122
#: sys-utils/nsenter.c:482 sys-utils/prlimit.c:642 sys-utils/rtcwake.c:577
#: sys-utils/setarch.c:324 sys-utils/setarch.c:403 sys-utils/setsid.c:115
#: sys-utils/swapon.c:341 sys-utils/switch_root.c:257 sys-utils/unshare.c:461
#: term-utils/script.c:589 text-utils/pg.c:1375
#, c-format
msgid "failed to execute %s"
msgstr "uitvoeren van %s is mislukt"

#: disk-utils/mkfs.cramfs.c:131
#, c-format
msgid ""
"usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
" -h         print this help\n"
" -v         be verbose\n"
" -E         make all warnings errors (non-zero exit status)\n"
" -b blksize use this blocksize, must equal page size\n"
" -e edition set edition number (part of fsid)\n"
" -N endian  set cramfs endianness (big|little|host), default host\n"
" -i file    insert a file image into the filesystem (requires >= 2.4.0)\n"
" -n name    set name of cramfs filesystem\n"
" -p         pad by %d bytes for boot code\n"
" -s         sort directory entries (old option, ignored)\n"
" -z         make explicit holes (requires >= 2.3.39)\n"
" dirname    root of the filesystem to be compressed\n"
" outfile    output file\n"
msgstr ""
"Gebruik:  %s [-h] [-v] [-b blokgrootte] [-e editie] [-i bestand]\n"
"                 [-N endian] [-n naam] mapnaam uitvoerbestand\n"
"\n"
" -h          deze hulptekst tonen\n"
" -v          gedetailleerde uitvoer produceren\n"
" -V          programmaversie tonen\n"
" -E          van alle waarschuwingen fouten maken (met niet-nul afsluitwaarde)\n"
"\n"
" -b BLOKGROOTTE  deze blokgrootte gebruiken; moet gelijk zijn aan paginagrootte\n"
" -e EDITIE   editienummer instellen (deel van bestandssysteem-ID)\n"
" -i BESTAND  een bestandsafbeelding invoegen in het bestandssysteem\n"
" -N ENDIAN   te gebruiken endianness (big|little|host; standaard is host)\n"
" -n NAAM     te gebruiken naam van 'cramfs'-bestandssysteem\n"
" -p          opvullen met %d bytes voor opstartcode\n"
" -s          (oude optie, wordt genegeerd) mapingangen sorteren\n"
" -z          expliciete gaten maken\n"
"\n"
" mapnaam = basismap van het in te pakken bestandssysteem\n"
" uitvoerbestand = te gebruiken uitvoerbestand\n"

#: disk-utils/mkfs.cramfs.c:164
#, c-format
msgid "readlink failed: %s"
msgstr "readlink() is mislukt: %s"

#: disk-utils/mkfs.cramfs.c:308
#, c-format
msgid "could not read directory %s"
msgstr "kan map %s niet lezen"

#: disk-utils/mkfs.cramfs.c:443
msgid "filesystem too big.  Exiting."
msgstr "bestandssysteem is te groot -- gestopt"

#: disk-utils/mkfs.cramfs.c:602
#, c-format
msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
msgstr "OEPS: blok is \"gecomprimeerd\" tot > 2*bloklengte (%ld)\n"

#: disk-utils/mkfs.cramfs.c:621
#, c-format
msgid "%6.2f%% (%+ld bytes)\t%s\n"
msgstr "%6.2f%% (%+ld bytes)\t%s\n"

# FIXME: standardize XXX
#: disk-utils/mkfs.cramfs.c:666
#, c-format
msgid "cannot close file %s"
msgstr "kan bestand %s niet sluiten"

#: disk-utils/mkfs.cramfs.c:732
msgid "invalid edition number argument"
msgstr "ongeldig editienummer"

#: disk-utils/mkfs.cramfs.c:742
msgid "invalid endianness given; must be 'big', 'little', or 'host'"
msgstr "ongeldige endian-waarde; mag zijn 'big', 'little' of 'host'"

#: disk-utils/mkfs.cramfs.c:806
#, c-format
msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB.  We might die prematurely."
msgstr ""
"Waarschuwing: de geschatte benodigde grootte is %lld MB (bovengrens),\n"
"maar de maximale afbeeldingsgrootte is %u MB.\n"
"Dit gaat misschien niet lukken."

#: disk-utils/mkfs.cramfs.c:830
msgid "ROM image map"
msgstr "inlezen van ROM-afbeelding"

#: disk-utils/mkfs.cramfs.c:842
#, c-format
msgid "Including: %s\n"
msgstr "Ingevoegd: %s\n"

#: disk-utils/mkfs.cramfs.c:848
#, c-format
msgid "Directory data: %zd bytes\n"
msgstr "Mapgegevens: %zd bytes\n"

#: disk-utils/mkfs.cramfs.c:856
#, c-format
msgid "Everything: %zd kilobytes\n"
msgstr "Alles: %zd kilobytes\n"

#: disk-utils/mkfs.cramfs.c:861
#, c-format
msgid "Super block: %zd bytes\n"
msgstr "Superblok: %zd bytes\n"

#: disk-utils/mkfs.cramfs.c:868
#, c-format
msgid "CRC: %x\n"
msgstr "CRC: %x\n"

#: disk-utils/mkfs.cramfs.c:873
#, c-format
msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
msgstr ""
"er is niet genoeg ruimte gereserveerd voor ROM-afbeelding\n"
"(%lld is gereserveerd, %zu gebruikt)"

#: disk-utils/mkfs.cramfs.c:879
#, c-format
msgid "ROM image write failed (%zd %zd)"
msgstr "Schrijven van ROM-afbeelding is mislukt (%zd %zd)"

#: disk-utils/mkfs.cramfs.c:882
msgid "ROM image"
msgstr "ROM-afbeelding"

#: disk-utils/mkfs.cramfs.c:891
#, c-format
msgid "warning: filenames truncated to %u bytes."
msgstr "Waarschuwing: er zijn bestandsnamen afgekapt tot %u bytes."

#: disk-utils/mkfs.cramfs.c:893
msgid "warning: files were skipped due to errors."
msgstr "Waarschuwing: er zijn bestanden overgeslagen vanwege fouten."

#: disk-utils/mkfs.cramfs.c:895
#, c-format
msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
msgstr "Waarschuwing: er zijn bestandsgroottes afgekapt tot %lu MB (minus 1 byte)."

#: disk-utils/mkfs.cramfs.c:899
#, c-format
msgid "warning: uids truncated to %u bits.  (This may be a security concern.)"
msgstr ""
"Waarschuwing: er zijn UID's afgekapt tot %u bits.\n"
"(Dit kan een veiligheidsprobleem zijn.)"

#: disk-utils/mkfs.cramfs.c:902
#, c-format
msgid "warning: gids truncated to %u bits.  (This may be a security concern.)"
msgstr ""
"Waarschuwing: er zijn GID's afgekapt tot %u bits.\n"
"(Dit kan een veiligheidsprobleem zijn.)"

#: disk-utils/mkfs.cramfs.c:905
#, c-format
msgid ""
"WARNING: device numbers truncated to %u bits.  This almost certainly means\n"
"that some device files will be wrong."
msgstr ""
"WAARSCHUWING: er zijn apparaatnummers afgekapt tot %u bits.  Dit betekent\n"
"zeer waarschijnlijk dat sommige apparaatbestanden niet juist zullen zijn."

# FIXME: use angular
#: disk-utils/mkfs.minix.c:135
#, c-format
msgid " %s [options] /dev/name [blocks]\n"
msgstr "  %s [opties] /dev/<naam> [<blokkenaantal>]\n"

#: disk-utils/mkfs.minix.c:137
msgid " -1                      use Minix version 1\n"
msgstr "  -1                         Minix versie 1 gebruiken\n"

#: disk-utils/mkfs.minix.c:138
msgid " -2, -v                  use Minix version 2\n"
msgstr "  -2, -v                     Minix versie 2 gebruiken\n"

#: disk-utils/mkfs.minix.c:139
msgid " -3                      use Minix version 3\n"
msgstr "  -3                         Minix versie 3 gebruiken\n"

#: disk-utils/mkfs.minix.c:140
msgid " -n, --namelength <num>  maximum length of filenames\n"
msgstr "  -n, --namelength <getal>   maximumlengte van bestandsnamen\n"

#: disk-utils/mkfs.minix.c:141
msgid " -i, --inodes <num>      number of inodes for the filesystem\n"
msgstr "  -i, --inodes <getal>       aantal te gebruiken inodes voor bestandssysteem\n"

#: disk-utils/mkfs.minix.c:142
msgid " -c, --check             check the device for bad blocks\n"
msgstr "  -c, --check                het apparaat op slechte blokken controleren\n"

#: disk-utils/mkfs.minix.c:143
msgid " -l, --badblocks <file>  list of bad blocks from file\n"
msgstr "  -l, --badblocks <bestand>  lijst met slechte blokken uit dit bestand lezen\n"

#: disk-utils/mkfs.minix.c:187
#, c-format
msgid "%s: seek to boot block failed  in write_tables"
msgstr "%s: 'seek' naar opstartblok is mislukt in write_tables()"

#: disk-utils/mkfs.minix.c:190
#, c-format
msgid "%s: unable to clear boot sector"
msgstr "%s: kan opstartsector niet wissen"

#: disk-utils/mkfs.minix.c:192
#, c-format
msgid "%s: seek failed in write_tables"
msgstr "%s: 'seek' is mislukt in write_tables()"

#: disk-utils/mkfs.minix.c:195
#, c-format
msgid "%s: unable to write super-block"
msgstr "%s: kan superblok niet schrijven"

#: disk-utils/mkfs.minix.c:198
#, c-format
msgid "%s: unable to write inode map"
msgstr "%s: schrijven van inode-kaart is mislukt"

#: disk-utils/mkfs.minix.c:201
#, c-format
msgid "%s: unable to write zone map"
msgstr "%s: schrijven van zone-kaart is mislukt"

#: disk-utils/mkfs.minix.c:204
#, c-format
msgid "%s: unable to write inodes"
msgstr "%s: schrijven van inodes is mislukt"

#: disk-utils/mkfs.minix.c:209
#, c-format
msgid "%s: seek failed in write_block"
msgstr "%s: 'seek' is mislukt in write_block()"

#: disk-utils/mkfs.minix.c:212
#, c-format
msgid "%s: write failed in write_block"
msgstr "%s: schrijven is mislukt in write_block()"

#: disk-utils/mkfs.minix.c:221 disk-utils/mkfs.minix.c:296
#: disk-utils/mkfs.minix.c:345
#, c-format
msgid "%s: too many bad blocks"
msgstr "%s: te veel slechte blokken"

#: disk-utils/mkfs.minix.c:229
#, c-format
msgid "%s: not enough good blocks"
msgstr "%s: onvoldoende goede blokken"

#: disk-utils/mkfs.minix.c:544
#, c-format
msgid ""
"First data block at %jd, which is too far (max %d).\n"
"Try specifying fewer inodes by passing --inodes <num>"
msgstr ""
"Eerste datablok is op %jd, en dat is te ver (maximum is %d).\n"
"Probeer minder inodes op te geven via --inodes <getal>."

#: disk-utils/mkfs.minix.c:564
#, c-format
msgid "%lu inode\n"
msgid_plural "%lu inodes\n"
msgstr[0] "%lu inode\n"
msgstr[1] "%lu inodes\n"

#: disk-utils/mkfs.minix.c:565
#, c-format
msgid "%lu block\n"
msgid_plural "%lu blocks\n"
msgstr[0] "%lu blok\n"
msgstr[1] "%lu blokken\n"

#: disk-utils/mkfs.minix.c:568
#, c-format
msgid "Zonesize=%zu\n"
msgstr "ZoneGrootte=%zu\n"

#: disk-utils/mkfs.minix.c:569
#, c-format
msgid ""
"Maxsize=%zu\n"
"\n"
msgstr ""
"MaxGrootte=%zu\n"
"\n"

#: disk-utils/mkfs.minix.c:582
#, c-format
msgid "%s: seek failed during testing of blocks"
msgstr "%s: 'seek' is mislukt tijdens testen van blokken"

#: disk-utils/mkfs.minix.c:589
#, c-format
msgid "Weird values in do_check: probably bugs\n"
msgstr "Vreemde waarden in do_check(): waarschijnlijk een interne programmafout\n"

#: disk-utils/mkfs.minix.c:622
#, c-format
msgid "%s: seek failed in check_blocks"
msgstr "%s: 'seek' is mislukt in check_blocks()"

#: disk-utils/mkfs.minix.c:632
#, c-format
msgid "%s: bad blocks before data-area: cannot make fs"
msgstr "%s: slechte blokken vóór gegevensgebied: kan geen bestandssysteem maken"

#: disk-utils/mkfs.minix.c:639 disk-utils/mkfs.minix.c:663
#, c-format
msgid "%d bad block\n"
msgid_plural "%d bad blocks\n"
msgstr[0] "%d slecht blok\n"
msgstr[1] "%d slechte blokken\n"

#: disk-utils/mkfs.minix.c:648
#, c-format
msgid "%s: can't open file of bad blocks"
msgstr "%s: kan slechteblokkenbestand niet openen"

#: disk-utils/mkfs.minix.c:653
#, c-format
msgid "badblock number input error on line %d\n"
msgstr "invoerfout in slechtbloknummer op regel %d\n"

#: disk-utils/mkfs.minix.c:654
#, c-format
msgid "%s: cannot read badblocks file"
msgstr "%s: kan slechteblokkenbestand niet lezen"

#: disk-utils/mkfs.minix.c:694
#, c-format
msgid "block size smaller than physical sector size of %s"
msgstr "blokgrootte is kleiner dan fysieke sectorgrootte van %s"

#: disk-utils/mkfs.minix.c:697
#, c-format
msgid "cannot determine size of %s"
msgstr "kan grootte van %s niet achterhalen"

#: disk-utils/mkfs.minix.c:705
#, c-format
msgid "%s: requested blocks (%llu) exceeds available (%llu) blocks\n"
msgstr "%s: gevraagde blokken (%llu) overstijgt beschikbare blokken (%llu)\n"

#: disk-utils/mkfs.minix.c:708
#, c-format
msgid "%s: number of blocks too small"
msgstr "%s: aantal blokken is te klein"

#: disk-utils/mkfs.minix.c:723 disk-utils/mkfs.minix.c:729
#, c-format
msgid "unsupported name length: %d"
msgstr "ongeldige naamslengte: %d"

#: disk-utils/mkfs.minix.c:732
#, c-format
msgid "unsupported minix file system version: %d"
msgstr "niet-ondersteunde Minix-bestandssysteemversie: %d"

#: disk-utils/mkfs.minix.c:767
msgid "-v is ambiguous, use '-2' instead"
msgstr "optie '-v' is niet eenduidig; gebruik liever '-2'"

#: disk-utils/mkfs.minix.c:778
msgid "failed to parse maximum length of filenames"
msgstr "ontleden van maximumlengte van bestandsnamen is mislukt"

#: disk-utils/mkfs.minix.c:782
msgid "failed to parse number of inodes"
msgstr "ontleden van aantal inodes is mislukt"

#: disk-utils/mkfs.minix.c:806
msgid "failed to parse number of blocks"
msgstr "ontleden van aantal blokken is mislukt"

#: disk-utils/mkfs.minix.c:813
#, c-format
msgid "%s is mounted; will not make a filesystem here!"
msgstr "%s is aangekoppeld; zal hier geen bestandssysteem maken!"

#: disk-utils/mkswap.c:80
#, c-format
msgid "Bad user-specified page size %u"
msgstr "Ongeldige door gebruiker aangegeven paginagrootte %u"

#: disk-utils/mkswap.c:83
#, c-format
msgid "Using user-specified page size %d, instead of the system value %d"
msgstr "De opgegeven paginagrootte %d wordt gebruikt, in plaats van systeemwaarde %d"

#: disk-utils/mkswap.c:124
msgid "Label was truncated."
msgstr "Label is afgekapt."

#: disk-utils/mkswap.c:132
#, c-format
msgid "no label, "
msgstr "geen label, "

#: disk-utils/mkswap.c:140
#, c-format
msgid "no uuid\n"
msgstr "geen UUID\n"

#: disk-utils/mkswap.c:147
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] device [size]\n"
msgstr ""
"\n"
"Gebruik:  %s [opties] <apparaat> [<grootte>]\n"

#: disk-utils/mkswap.c:152
msgid "Set up a Linux swap area.\n"
msgstr "Prepareert een Linux-wisselgeheugengebied.\n"

#: disk-utils/mkswap.c:155
#, c-format
msgid ""
"\n"
"Options:\n"
" -c, --check               check bad blocks before creating the swap area\n"
" -f, --force               allow swap size area be larger than device\n"
" -p, --pagesize SIZE       specify page size in bytes\n"
" -L, --label LABEL         specify label\n"
" -v, --swapversion NUM     specify swap-space version number\n"
" -U, --uuid UUID           specify the uuid to use\n"
" -V, --version             output version information and exit\n"
" -h, --help                display this help and exit\n"
"\n"
msgstr ""
"\n"
"Opties:\n"
"  -c, --check              eerst op slechte blokken controleren\n"
"  -f, --force              toestaan dat wisselgebied groter is dan apparaat\n"
"  -L, --label LABEL        te gebruiken label\n"
"  -p, --pagesize GROOTTE   te gebruiken paginagrootte (in bytes)\n"
"  -U, --uuid UUID          te gebruiken UUID\n"
"  -v, --swapversion GETAL  te gebruiken wisselgeheugenversie\n"
"  -V, --version            programmaversie tonen en stoppen\n"
"  -h, --help               deze hulptekst tonen en stoppen\n"
"\n"

#: disk-utils/mkswap.c:174
#, c-format
msgid "too many bad pages: %lu"
msgstr "te veel slechte pagina's: %lu"

#: disk-utils/mkswap.c:195
msgid "seek failed in check_blocks"
msgstr "'seek' is mislukt in check_blocks()"

#: disk-utils/mkswap.c:203
#, c-format
msgid "%lu bad page\n"
msgid_plural "%lu bad pages\n"
msgstr[0] "%lu slechte pagina\n"
msgstr[1] "%lu slechte pagina's\n"

#: disk-utils/mkswap.c:228
msgid "unable to alloc new libblkid probe"
msgstr "onvoldoende geheugen beschikbaar voor nieuwe libblkid-sonde"

#: disk-utils/mkswap.c:230
msgid "unable to assign device to libblkid probe"
msgstr "kan apparaat niet aan libblkid-sonde toewijzen"

#: disk-utils/mkswap.c:247
#, c-format
msgid "warning: checking bad blocks from swap file is not supported: %s"
msgstr "waarschuwing: het controleren op slechte blokken in een wisselgeheugenbestand wordt niet ondersteund: %s"

#: disk-utils/mkswap.c:261 disk-utils/mkswap.c:287 disk-utils/mkswap.c:334
msgid "unable to rewind swap-device"
msgstr "terugspoelen van wisselgeheugenapparaat is mislukt"

#: disk-utils/mkswap.c:290
msgid "unable to erase bootbits sectors"
msgstr "wissen van bootbits-sectoren is mislukt"

#: disk-utils/mkswap.c:306
#, c-format
msgid "%s: warning: wiping old %s signature."
msgstr "%s: waarschuwing: wissen van oude %s-vingerafdruk."

#: disk-utils/mkswap.c:311
#, c-format
msgid "%s: warning: don't erase bootbits sectors"
msgstr "%s: waarschuwing: bootbits-sectoren niet wissen"

#: disk-utils/mkswap.c:314
#, c-format
msgid "        (%s partition table detected). "
msgstr "        (%s-partitietabel gedetecteerd). "

#: disk-utils/mkswap.c:316
#, c-format
msgid "        (compiled without libblkid). "
msgstr "        (gecompileerd zonder 'libblkid'). "

#: disk-utils/mkswap.c:317
#, c-format
msgid "Use -f to force.\n"
msgstr "Gebruik '-f' om creatie af te dwingen.\n"

#: disk-utils/mkswap.c:339
#, c-format
msgid "%s: unable to write signature page"
msgstr "%s: schrijven van vingerafdrukpagina is mislukt"

#: disk-utils/mkswap.c:380
msgid "parsing page size failed"
msgstr "ontleden van paginagrootte is mislukt"

#: disk-utils/mkswap.c:386
msgid "parsing version number failed"
msgstr "ontleden van versienummer is mislukt"

#: disk-utils/mkswap.c:389
#, c-format
msgid "swapspace version %d is not supported"
msgstr "wisselgeheugenversie %d wordt niet ondersteund"

#: disk-utils/mkswap.c:395
#, c-format
msgid "warning: ignoring -U (UUIDs are unsupported by %s)"
msgstr ""
"waarschuwing: optie '-U' wordt genegeerd\n"
"(UUID's worden door %s niet ondersteund)"

#: disk-utils/mkswap.c:414
msgid "only one device argument is currently supported"
msgstr "momenteel wordt slechts één apparaatargument ondersteund"

#: disk-utils/mkswap.c:421
msgid "error: parsing UUID failed"
msgstr "fout: kan UUID niet ontleden"

#: disk-utils/mkswap.c:430
msgid "error: Nowhere to set up swap on?"
msgstr "fout: Nergens om wisselgeheugen op in te stellen?"

#: disk-utils/mkswap.c:436
msgid "invalid block count argument"
msgstr "ongeldig blokkenaantal"

#: disk-utils/mkswap.c:445
#, c-format
msgid "error: size %llu KiB is larger than device size %<PRIu64> KiB"
msgstr "fout: grootte %llu KiB is groter dan apparaatgrootte (%<PRIu64> KiB)"

#: disk-utils/mkswap.c:451
#, c-format
msgid "error: swap area needs to be at least %ld KiB"
msgstr "fout: wisselgeheugen moet minstens %ld KiB zijn"

#: disk-utils/mkswap.c:456
#, c-format
msgid "warning: truncating swap area to %llu KiB"
msgstr "waarschuwing: wisselgeheugen is afgekapt tot %llu KiB"

#: disk-utils/mkswap.c:461
#, c-format
msgid "error: %s is mounted; will not make swapspace"
msgstr "fout: %s is aangekoppeld; zal hier geen wisselgeheugen maken"

#: disk-utils/mkswap.c:468 sys-utils/swapon.c:526
#, c-format
msgid "%s: insecure permissions %04o, %04o suggested."
msgstr "%s: onveilige toegangsrechten: %04o -- aangeraden wordt: %04o"

#: disk-utils/mkswap.c:472 sys-utils/swapon.c:531
#, c-format
msgid "%s: insecure file owner %d, 0 (root) suggested."
msgstr "%s: onveilige bestandseigenaar %d -- 0 (root) wordt aangeraden"

#: disk-utils/mkswap.c:487
msgid "Unable to set up swap-space: unreadable"
msgstr "Instellen van wisselgeheugen is mislukt: onleesbaar"

#: disk-utils/mkswap.c:492
#, c-format
msgid "Setting up swapspace version %d, size = %s (%<PRIu64> bytes)\n"
msgstr "Instellen van wisselgeheugen, versie %d, grootte = %s (%<PRIu64> bytes)\n"

#: disk-utils/mkswap.c:512
#, c-format
msgid "%s: unable to obtain selinux file label"
msgstr "%s: kan geen SELinux-bestandslabel verkrijgen"

#: disk-utils/mkswap.c:515
msgid "unable to matchpathcon()"
msgstr "kan uit het pad geen context bepalen"

#: disk-utils/mkswap.c:518
msgid "unable to create new selinux context"
msgstr "kan geen nieuwe SELinux-context aanmaken"

#: disk-utils/mkswap.c:520
msgid "couldn't compute selinux context"
msgstr "kan geen nieuwe SELinux-context berekenen"

#: disk-utils/mkswap.c:526
#, c-format
msgid "unable to relabel %s to %s"
msgstr "kan %s niet herlabelen naar %s"

#: disk-utils/partx.c:86
msgid "partition number"
msgstr "partitienummer"

#: disk-utils/partx.c:87
msgid "start of the partition in sectors"
msgstr "begin van de partitie (in sectoren)"

#: disk-utils/partx.c:88
msgid "end of the partition in sectors"
msgstr "einde van de partitie (in sectoren)"

#: disk-utils/partx.c:89
msgid "number of sectors"
msgstr "aantal sectoren"

#: disk-utils/partx.c:90
msgid "human readable size"
msgstr "leesbare grootte"

#: disk-utils/partx.c:91
msgid "partition name"
msgstr "partitienaam"

#: disk-utils/partx.c:92 misc-utils/findmnt.c:108 misc-utils/lsblk.c:171
msgid "partition UUID"
msgstr "partitie-UUID"

#: disk-utils/partx.c:93
msgid "partition table type (dos, gpt, ...)"
msgstr "partitietabeltype (dos, gpt, ...)"

#: disk-utils/partx.c:94 misc-utils/lsblk.c:172
msgid "partition flags"
msgstr "partitievlaggen"

#: disk-utils/partx.c:95
msgid "partition type (a string, a UUID, or hex)"
msgstr "partitietype (hex, of UUID, of tekenreeks)"

#: disk-utils/partx.c:114 sys-utils/losetup.c:513 sys-utils/losetup.c:621
msgid "failed to initialize loopcxt"
msgstr "initialiseren van 'loopcxt' is mislukt"

#: disk-utils/partx.c:118
#, c-format
msgid "%s: failed to find unused loop device"
msgstr "%s: kan geen ongebruikt lus-apparaat vinden"

#: disk-utils/partx.c:122
#, c-format
msgid "Trying to use '%s' for the loop device\n"
msgstr "Er wordt geprobeerd om '%s' als lus-apparaat te gebruiken\n"

#: disk-utils/partx.c:126
#, c-format
msgid "%s: failed to set backing file"
msgstr "%s: kan achterliggend bestand niet instellen"

#: disk-utils/partx.c:131 sys-utils/losetup.c:557
#, c-format
msgid "%s: failed to set up loop device"
msgstr "%s: instellen van lus-apparaat is mislukt"

#: disk-utils/partx.c:161 login-utils/lslogins.c:307 misc-utils/fincore.c:92
#: misc-utils/findmnt.c:376 misc-utils/lsblk.c:365 misc-utils/lslocks.c:342
#: sys-utils/losetup.c:107 sys-utils/lscpu.c:373 sys-utils/lsipc.c:232
#: sys-utils/lsmem.c:136 sys-utils/lsns.c:189 sys-utils/prlimit.c:277
#: sys-utils/swapon.c:147 sys-utils/wdctl.c:151 sys-utils/zramctl.c:148
#, c-format
msgid "unknown column: %s"
msgstr "onbekende kolom: %s"

#: disk-utils/partx.c:208
#, c-format
msgid "%s: failed to get partition number"
msgstr "%s: kan partitienummer niet achterhalen"

#: disk-utils/partx.c:286 disk-utils/partx.c:324 disk-utils/partx.c:477
#, c-format
msgid "specified range <%d:%d> does not make sense"
msgstr "gegeven bereik <%d:%d> is onzinnig"

#: disk-utils/partx.c:290
#, c-format
msgid "range recount: max partno=%d, lower=%d, upper=%d\n"
msgstr "hertelling: maximum partitienummer=%d, laagste=%d, hoogste=%d\n"

#: disk-utils/partx.c:297
#, c-format
msgid "%s: error deleting partition %d"
msgstr "%s: fout bij verwijderen van partitie %d"

#: disk-utils/partx.c:299
#, c-format
msgid "%s: error deleting partitions %d-%d"
msgstr "%s: fout bij verwijderen van partities %d-%d"

#: disk-utils/partx.c:333
#, c-format
msgid "%s: partition #%d removed\n"
msgstr "%s: partitie #%d is verwijderd\n"

#: disk-utils/partx.c:337
#, c-format
msgid "%s: partition #%d doesn't exist\n"
msgstr "%s: partitie #%d bestaat niet\n"

#: disk-utils/partx.c:342
#, c-format
msgid "%s: deleting partition #%d failed"
msgstr "%s: verwijderen van partitie #%d is mislukt"

#: disk-utils/partx.c:362
#, c-format
msgid "%s: error adding partition %d"
msgstr "%s: fout bij toevoegen van partitie %d"

#: disk-utils/partx.c:364
#, c-format
msgid "%s: error adding partitions %d-%d"
msgstr "%s: fout bij toevoegen van partities %d-%d"

#: disk-utils/partx.c:405 disk-utils/partx.c:513
#, c-format
msgid "%s: partition #%d added\n"
msgstr "%s: partitie #%d is toegevoegd\n"

#: disk-utils/partx.c:410
#, c-format
msgid "%s: adding partition #%d failed"
msgstr "%s: toevoegen van partitie #%d is mislukt"

#: disk-utils/partx.c:445
#, c-format
msgid "%s: error updating partition %d"
msgstr "%s: fout bij bijwerken van partitie %d"

#: disk-utils/partx.c:447
#, c-format
msgid "%s: error updating partitions %d-%d"
msgstr "%s: fout bij bijwerken van partities %d-%d"

#: disk-utils/partx.c:486
#, c-format
msgid "%s: no partition #%d"
msgstr "%s: er is geen partitie #%d"

#: disk-utils/partx.c:507
#, c-format
msgid "%s: partition #%d resized\n"
msgstr "%s: partitie #%d is van grootte gewijzigd\n"

#: disk-utils/partx.c:521
#, c-format
msgid "%s: updating partition #%d failed"
msgstr "%s: bijwerken van partitie #%d is mislukt"

#: disk-utils/partx.c:562
#, c-format
msgid "#%2d: %9ju-%9ju (%9ju sector, %6ju MB)\n"
msgid_plural "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
msgstr[0] "#%2d: %9ju-%9ju (%9ju sector, %6ju MB)\n"
msgstr[1] "#%2d: %9ju-%9ju (%9ju sectoren, %6ju MB)\n"

#: disk-utils/partx.c:678 misc-utils/fincore.c:374 misc-utils/findmnt.c:1624
#: misc-utils/lsblk.c:1919 misc-utils/lslocks.c:462 sys-utils/losetup.c:326
#: sys-utils/lscpu.c:1769 sys-utils/prlimit.c:306 sys-utils/swapon.c:290
#: sys-utils/wdctl.c:272
#, fuzzy
msgid "failed to allocate output column"
msgstr "reserveren van geheugen voor uitvoerregel is mislukt"

#: disk-utils/partx.c:722
#, c-format
msgid "failed to initialize blkid filter for '%s'"
msgstr "initialiseren van blkid-filter voor '%s' is mislukt"

#: disk-utils/partx.c:730
#, c-format
msgid "%s: failed to read partition table"
msgstr "%s: lezen van partitietabel is mislukt"

#: disk-utils/partx.c:736
#, c-format
msgid "%s: partition table type '%s' detected\n"
msgstr "%s: '%s'-partitietabel gedetecteerd\n"

#: disk-utils/partx.c:740
#, c-format
msgid "%s: partition table with no partitions"
msgstr "%s: partitietabel met nul partities"

#: disk-utils/partx.c:752
#, c-format
msgid " %s [-a|-d|-s|-u] [--nr <n:m> | <partition>] <disk>\n"
msgstr "  %s [-a|-d|-s|-u] [--nr <N:M> | <partitie>] <apparaat>\n"

#: disk-utils/partx.c:756
msgid "Tell the kernel about the presence and numbering of partitions.\n"
msgstr "Vertelt de kernel over het bestaan en de nummering van partities.\n"

#: disk-utils/partx.c:759
msgid " -a, --add            add specified partitions or all of them\n"
msgstr "  -a, --add            gegeven partities (of alle) toevoegen\n"

#: disk-utils/partx.c:760
msgid " -d, --delete         delete specified partitions or all of them\n"
msgstr "  -d, --delete         gegeven partities (of alle) verwijderen\n"

#: disk-utils/partx.c:761
msgid " -u, --update         update specified partitions or all of them\n"
msgstr "  -u, --update         gegeven partities (of alle) bijwerken\n"

#: disk-utils/partx.c:762
msgid ""
" -s, --show           list partitions\n"
"\n"
msgstr ""
"  -s, --show           partities tonen\n"
"\n"

#: disk-utils/partx.c:763 misc-utils/lsblk.c:1637 sys-utils/lsmem.c:380
msgid " -b, --bytes          print SIZE in bytes rather than in human readable format\n"
msgstr "  -b, --bytes          grootte in bytes weergeven in plaats van in leesbare vorm\n"

#: disk-utils/partx.c:764
msgid " -g, --noheadings     don't print headings for --show\n"
msgstr "  -g, --noheadings     bij '--show' geen kopregel tonen\n"

#: disk-utils/partx.c:765
msgid " -n, --nr <n:m>       specify the range of partitions (e.g. --nr 2:4)\n"
msgstr "  -n, --nr <N:M>       te gebruiken bereik van partities (bijvoorbeeld '-n 2:4')\n"

#: disk-utils/partx.c:766
msgid " -o, --output <list>  define which output columns to use\n"
msgstr "  -o, --output <lijst>   weer te geven uitvoerkolommen\n"

#: disk-utils/partx.c:767 misc-utils/lsblk.c:1652 sys-utils/lsmem.c:378
msgid " -P, --pairs          use key=\"value\" output format\n"
msgstr "  -P, --pairs          uitvoer produceren in de vorm van sleutel=\"waarde\"\n"

#: disk-utils/partx.c:768 misc-utils/lsblk.c:1653 sys-utils/lsmem.c:383
msgid " -r, --raw            use raw output format\n"
msgstr "  -r, --raw            rauwe uitvoer produceren\n"

#: disk-utils/partx.c:769
#, fuzzy
msgid " -S, --sector-size <num>  overwrite sector size\n"
msgstr "  -b, --sector-size <getal>  grootte van fysieke en logische sector\n"

#: disk-utils/partx.c:770
#, fuzzy
msgid " -t, --type <type>    specify the partition type\n"
msgstr "  -t, --type <type>    te gebruiken partitietype ('dos', 'bsd', 'solaris', ...)\n"

#: disk-utils/partx.c:771
#, fuzzy
msgid "     --list-types     list supported partition types and exit\n"
msgstr "  -T, --list-types    bekende partitietypen opsommen"

#: disk-utils/partx.c:772 sys-utils/fallocate.c:100
msgid " -v, --verbose        verbose mode\n"
msgstr "  -v, --verbose        gedetailleerde uitvoer produceren\n"

#: disk-utils/partx.c:778
msgid ""
"\n"
"Available columns (for --show, --raw or --pairs):\n"
msgstr ""
"\n"
"Beschikbare kolommen (voor '--show', '--raw' of '--pairs') zijn:\n"

#: disk-utils/partx.c:857
msgid "failed to parse --nr <M-N> range"
msgstr "ontleden van bereik in '--nr <M-N>' is mislukt"

#: disk-utils/partx.c:943
msgid "partition and disk name do not match"
msgstr "naam van partitie en schijf komen niet overeen"

#: disk-utils/partx.c:971
msgid "--nr and <partition> are mutually exclusive"
msgstr "<partitie> en optie '--nr' gaan niet samen"

#: disk-utils/partx.c:990
#, c-format
msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
msgstr "partitie: %s, schijf: %s, ondergrens: %d, bovengrens: %d\n"

#: disk-utils/partx.c:1002
#, c-format
msgid "%s: cannot delete partitions"
msgstr "%s: kan partities niet verwijderen"

#: disk-utils/partx.c:1005
#, c-format
msgid "%s: partitioned loop devices unsupported"
msgstr "%s: gepartitioneerde lus-apparaten worden niet ondersteund"

#: disk-utils/partx.c:1022
#, c-format
msgid "%s: failed to initialize blkid prober"
msgstr "%s: initialiseren van blkid-sonde is mislukt"

#: disk-utils/raw.c:51
#, c-format
msgid ""
" %1$s %2$srawN <major> <minor>\n"
" %1$s %2$srawN /dev/<blockdevice>\n"
" %1$s -q %2$srawN\n"
" %1$s -qa\n"
msgstr ""
"  %1$s %2$srawN <hoofdnummer> <subnummer>\n"
"  %1$s %2$srawN /dev/<blokapparaat>\n"
"  %1$s -q %2$srawN\n"
"  %1$s -qa\n"

#: disk-utils/raw.c:58
msgid "Bind a raw character device to a block device.\n"
msgstr "Bindt een rauw byte-apparaat aan een blok-apparaat.\n"

#: disk-utils/raw.c:61
msgid " -q, --query    set query mode\n"
msgstr "  -q, --query     binding tonen in plaats van instellen\n"

#: disk-utils/raw.c:62
msgid " -a, --all      query all raw devices\n"
msgstr "  -a, --all      alle bestaande 'raw'-apparaten langslopen\n"

#: disk-utils/raw.c:164
#, c-format
msgid "Device '%s' is the control raw device (use raw<N> where <N> is greater than zero)"
msgstr ""
"Apparaat '%s' is de 'raw'-besturing;\n"
"(gebruik rawN, waar N groter is dan nul)"

#: disk-utils/raw.c:181
#, c-format
msgid "Cannot locate block device '%s'"
msgstr "Kan blok-apparaat '%s' niet lokaliseren"

#: disk-utils/raw.c:184
#, c-format
msgid "Device '%s' is not a block device"
msgstr "Apparaat '%s' is geen blok-apparaat"

#: disk-utils/raw.c:193 disk-utils/raw.c:196 sys-utils/ipcrm.c:351
#: sys-utils/ipcrm.c:364 sys-utils/ipcrm.c:377
msgid "failed to parse argument"
msgstr "ontleden van argument is mislukt"

#: disk-utils/raw.c:213
#, c-format
msgid "Cannot open master raw device '%s'"
msgstr "Kan hoofd-'raw'-apparaat '%s' niet openen"

#: disk-utils/raw.c:228
#, c-format
msgid "Cannot locate raw device '%s'"
msgstr "Kan 'raw'-apparaat '%s' niet lokaliseren"

#: disk-utils/raw.c:231
#, c-format
msgid "Raw device '%s' is not a character dev"
msgstr "'raw'-apparaat '%s' is geen byte-apparaat"

#: disk-utils/raw.c:235
#, c-format
msgid "Device '%s' is not a raw dev"
msgstr "Apparaat '%s' is geen 'raw'-apparaat"

#: disk-utils/raw.c:245
msgid "Error querying raw device"
msgstr "Fout tijdens polsen van 'raw'-apparaat"

#: disk-utils/raw.c:254 disk-utils/raw.c:269
#, c-format
msgid "%sraw%d:  bound to major %d, minor %d\n"
msgstr "%sraw%d:  gebonden aan hoofdnummer %d, subnummer %d\n"

#: disk-utils/raw.c:268
msgid "Error setting raw device"
msgstr "Fout bij instellen van 'raw'-apparaat"

#: disk-utils/resizepart.c:19
#, c-format
msgid " %s <disk device> <partition number> <length>\n"
msgstr "  %s <blokapparaat> <partitienummer> <lengte>\n"

#: disk-utils/resizepart.c:23
msgid "Tell the kernel about the new size of a partition.\n"
msgstr "Vertelt de kernel over de nieuwe grootte van de opgegeven partitie.\n"

#: disk-utils/resizepart.c:104
#, c-format
msgid "%s: failed to get start of the partition number %s"
msgstr "%s: kan het begin van partitienummer %s niet achterhalen"

#: disk-utils/resizepart.c:109
msgid "failed to resize partition"
msgstr "van grootte veranderen van partitie is mislukt"

#: disk-utils/sfdisk.c:233
msgid "failed to allocate nested libfdisk context"
msgstr "reserveren van geheugen voor geneste 'libfdisk'-context is mislukt"

#: disk-utils/sfdisk.c:293
#, c-format
msgid "cannot seek %s"
msgstr "kan geen 'seek' doen op %s"

#: disk-utils/sfdisk.c:304 libfdisk/src/bsd.c:722 libfdisk/src/bsd.c:896
#, c-format
msgid "cannot write %s"
msgstr "kan niet naar %s niet schrijven"

#: disk-utils/sfdisk.c:311
#, c-format
msgid "%12s (offset %5ju, size %5ju): %s"
msgstr "%12s (positie = %5ju, grootte = %5ju): %s"

#: disk-utils/sfdisk.c:317
#, c-format
msgid "%s: failed to create a backup"
msgstr "%s: het maken van een reservekopie is mislukt"

#: disk-utils/sfdisk.c:330
msgid "failed to create a backup file, $HOME undefined"
msgstr "het maken van een reservekopiebestand is mislukt, want $HOME is niet gedefinieerd"

#: disk-utils/sfdisk.c:356
msgid "Backup files:"
msgstr "Reservekopiebestanden:"

#: disk-utils/sfdisk.c:381
msgid "failed to read new partition from device; ignoring --move-data"
msgstr "lezen van nieuwe partitie is mislukt; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:383
msgid "failed to get size of the new partition; ignoring --move-data"
msgstr "kan grootte van nieuwe partitie niet achterhalen; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:385
msgid "failed to get start of the new partition; ignoring --move-data"
msgstr "kan begin van nieuwe partitie niet achterhalen; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:387
msgid "failed to get size of the old partition; ignoring --move-data"
msgstr "kan grootte van oude partitie niet achterhalen; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:389
msgid "failed to get start of the old partition; ignoring --move-data"
msgstr "kan begin van oude partitie niet achterhalen; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:391
msgid "start of the partition has not been moved; ignoring --move-data"
msgstr "begin van de partitie is niet verplaatst; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:393
msgid "new partition is smaller than original; ignoring --move-data"
msgstr "nieuwe partitie is kleiner dan de oude; '--move-data' wordt genegeerd"

#: disk-utils/sfdisk.c:443
msgid "Data move:"
msgstr "Gegevensverplaatsing:"

#: disk-utils/sfdisk.c:445
#, c-format
msgid " typescript file: %s"
msgstr " scriptbestand: %s"

#: disk-utils/sfdisk.c:446
#, c-format
msgid " old start: %ju, new start: %ju (move %ju sectors)\n"
msgstr " oude begin: %ju,  nieuwe begin: %ju  (%ju sectoren verplaatsen)\n"

#: disk-utils/sfdisk.c:453
msgid "Do you want to move partition data?"
msgstr "Wilt u de gegevens op de partitie verplaatsen?"

#: disk-utils/sfdisk.c:455 disk-utils/sfdisk.c:1823
msgid "Leaving."
msgstr "Dag."

#: disk-utils/sfdisk.c:528
#, c-format
msgid "%s: failed to move data"
msgstr "%s: verplaatsen van gegevens is mislukt"

#: disk-utils/sfdisk.c:543
msgid "The partition table is unchanged (--no-act)."
msgstr "De partitietabel is ongewijzigd (--no-act)."

#: disk-utils/sfdisk.c:549
msgid ""
"\n"
"The partition table has been altered."
msgstr ""
"\n"
"De partitietabel is gewijzigd."

#: disk-utils/sfdisk.c:625
#, c-format
msgid "unsupported label '%s'"
msgstr "niet-ondersteund label '%s'"

#: disk-utils/sfdisk.c:628
msgid ""
"Id  Name\n"
"\n"
msgstr ""
"ID  Naam\n"
"\n"

#: disk-utils/sfdisk.c:658
msgid "unrecognized partition table type"
msgstr "onbekend partitietabeltype"

#: disk-utils/sfdisk.c:711
#, c-format
msgid "Cannot get size of %s"
msgstr "kan grootte van %s niet opvragen"

#: disk-utils/sfdisk.c:748
#, c-format
msgid "total: %ju blocks\n"
msgstr "totaal: %ju blokken\n"

#: disk-utils/sfdisk.c:810 disk-utils/sfdisk.c:878 disk-utils/sfdisk.c:919
#: disk-utils/sfdisk.c:949 disk-utils/sfdisk.c:1016 disk-utils/sfdisk.c:1080
#: disk-utils/sfdisk.c:1135 disk-utils/sfdisk.c:1191 disk-utils/sfdisk.c:1570
msgid "no disk device specified"
msgstr "geen schijfapparaat gegeven"

#: disk-utils/sfdisk.c:821
msgid "toggle boot flags is supported for MBR only"
msgstr "het omschakelen van de opstartvlag wordt alleen ondersteund voor een MBR"

#: disk-utils/sfdisk.c:852 disk-utils/sfdisk.c:898 disk-utils/sfdisk.c:1021
#: disk-utils/sfdisk.c:1085 disk-utils/sfdisk.c:1140 disk-utils/sfdisk.c:1196
#: disk-utils/sfdisk.c:1568 disk-utils/sfdisk.c:2064
msgid "failed to parse partition number"
msgstr "kan partitienummer niet ontleden"

#: disk-utils/sfdisk.c:857
#, c-format
msgid "%s: partition %d: failed to toggle bootable flag"
msgstr "%s: partitie %d: omschakelen van opstartvlag is mislukt"

#: disk-utils/sfdisk.c:893 disk-utils/sfdisk.c:901
#, c-format
msgid "%s: partition %zu: failed to delete"
msgstr "%s: partitie %zu: verwijderen is mislukt"

#: disk-utils/sfdisk.c:956
#, fuzzy, c-format
msgid "%s: does not contain a recognized partition table"
msgstr "Apparaat bevat geen herkenbare partitietabel."

#: disk-utils/sfdisk.c:960
msgid "failed to allocate dump struct"
msgstr "reserveren van geheugen voor dumpstruct is mislukt"

#: disk-utils/sfdisk.c:964
#, fuzzy, c-format
msgid "%s: failed to dump partition table"
msgstr "opslaan van partitietabel is mislukt"

#: disk-utils/sfdisk.c:994
#, c-format
msgid "%s: no partition table found"
msgstr "%s: geen partitietabel gevonden"

#: disk-utils/sfdisk.c:998
#, c-format
msgid "%s: partition %zu: partition table contains only %zu partitions"
msgstr "%s: partitie %zu: partitietabel bevat slechts %zu partities"

#: disk-utils/sfdisk.c:1001
#, c-format
msgid "%s: partition %zu: partition is unused"
msgstr "%s: partitie %zu wordt niet gebruikt"

#: disk-utils/sfdisk.c:1020 disk-utils/sfdisk.c:1084 disk-utils/sfdisk.c:1139
#: disk-utils/sfdisk.c:1195
msgid "no partition number specified"
msgstr "geen partitienummer opgegeven"

#: disk-utils/sfdisk.c:1026 disk-utils/sfdisk.c:1090 disk-utils/sfdisk.c:1145
#: disk-utils/sfdisk.c:1201
msgid "unexpected arguments"
msgstr "onverwachte argumenten"

#: disk-utils/sfdisk.c:1041
#, c-format
msgid "%s: partition %zu: failed to get partition type"
msgstr "%s: partitie %zu: achterhalen van partitietype is mislukt"

#: disk-utils/sfdisk.c:1060
#, c-format
msgid "failed to parse %s partition type '%s'"
msgstr "ontleden van %s-partitietype '%s' is mislukt"

#: disk-utils/sfdisk.c:1064
#, c-format
msgid "%s: partition %zu: failed to set partition type"
msgstr "%s: partitie %zu: instellen van partitietype is mislukt"

#: disk-utils/sfdisk.c:1102
#, c-format
msgid "%s: partition %zu: failed to get partition UUID"
msgstr "%s: partitie %zu: achterhalen van partitie-UUID is mislukt"

#: disk-utils/sfdisk.c:1115 disk-utils/sfdisk.c:1170 disk-utils/sfdisk.c:1224
msgid "failed to allocate partition object"
msgstr "reserveren van geheugen voor partitie-object is mislukt"

#: disk-utils/sfdisk.c:1119
#, c-format
msgid "%s: partition %zu: failed to set partition UUID"
msgstr "%s: partitie %zu: instellen van partitie-UUID is mislukt"

#: disk-utils/sfdisk.c:1157
#, c-format
msgid "%s: partition %zu: failed to get partition name"
msgstr "%s: partitie %zu: achterhalen van partitienaam is mislukt"

#: disk-utils/sfdisk.c:1174
#, c-format
msgid "%s: partition %zu: failed to set partition name"
msgstr "%s: partitie %zu: instellen van partitienaam is mislukt"

#: disk-utils/sfdisk.c:1228
#, c-format
msgid "%s: partition %zu: failed to set partition attributes"
msgstr "%s: partitie %zu: instellen van partitie-eigenschappen is mislukt"

#: disk-utils/sfdisk.c:1271
msgid " Commands:\n"
msgstr " Opdrachten:\n"

#: disk-utils/sfdisk.c:1273
msgid "   write    write table to disk and exit\n"
msgstr "   write    de tabel naar schijf schrijven en afsluiten\n"

#: disk-utils/sfdisk.c:1274
msgid "   quit     show new situation and wait for user's feedback before write\n"
msgstr "   quit     nieuwe situatie tonen, en antwoord afwachten alvorens te schrijven\n"

#: disk-utils/sfdisk.c:1275
msgid "   abort    exit sfdisk shell\n"
msgstr "   abort    de sfdisk-shell verlaten\n"

#: disk-utils/sfdisk.c:1276
msgid "   print    display the partition table\n"
msgstr "   print    de partitietabel weergeven\n"

#: disk-utils/sfdisk.c:1277
msgid "   help     show this help text\n"
msgstr "   help     deze hulptekst tonen\n"

#: disk-utils/sfdisk.c:1279
msgid "   Ctrl-D   the same as 'quit'\n"
msgstr "   Ctrl-D   hetzelfde als 'quit'\n"

#: disk-utils/sfdisk.c:1283
msgid " Input format:\n"
msgstr " Invoeropmaak:\n"

#: disk-utils/sfdisk.c:1285
#, fuzzy
msgid "   <start>, <size>, <type>, <bootable>\n"
msgstr "   <begin>, <grootte>, <type>, <opstartbaar>\n"

#: disk-utils/sfdisk.c:1288
msgid ""
"   <start>  Beginning of the partition in sectors, or bytes if\n"
"            specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
"            The default is the first free space.\n"
msgstr ""

#: disk-utils/sfdisk.c:1293
msgid ""
"   <size>   Size of the partition in sectors, or bytes if\n"
"            specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
"            The default is all available space.\n"
msgstr ""

#: disk-utils/sfdisk.c:1298
msgid "   <type>   The partition type.  Default is a Linux data partition.\n"
msgstr ""

#: disk-utils/sfdisk.c:1299
msgid "            MBR: hex or L,S,E,X shortcuts.\n"
msgstr ""

#: disk-utils/sfdisk.c:1300
msgid "            GPT: UUID or L,S,H shortcuts.\n"
msgstr ""

#: disk-utils/sfdisk.c:1303
msgid "   <bootable>  Use '*' to mark an MBR partition as bootable.\n"
msgstr ""

#: disk-utils/sfdisk.c:1307
msgid " Example:\n"
msgstr "Voorbeeld:\n"

#: disk-utils/sfdisk.c:1309
msgid "   , 4G     Creates a 4GiB partition at default start offset.\n"
msgstr ""

#: disk-utils/sfdisk.c:1341 sys-utils/dmesg.c:1454
msgid "unsupported command"
msgstr "niet-ondersteunde opdracht"

#: disk-utils/sfdisk.c:1343
#, c-format
msgid "line %d: unsupported command"
msgstr "regel %d: niet-ondersteunde opdracht"

#: disk-utils/sfdisk.c:1489
#, fuzzy, c-format
msgid "The old %s signature may remain on the device. It is recommended to wipe the device with wipefs(8) or sfdisk --wipe, in order to avoid possible collisions."
msgstr "Het wordt sterk aangeraden op het apparaat met wipefs(8) te wissen, om mogelijke \"botsingen\" te vermijden."

#: disk-utils/sfdisk.c:1537
msgid "failed to allocate partition name"
msgstr "reserveren van ruimte voor partitienaam is mislukt"

#: disk-utils/sfdisk.c:1578
msgid "failed to allocate script handler"
msgstr "reserveren van geheugen voor script-verwerker is mislukt"

#: disk-utils/sfdisk.c:1594
#, c-format
msgid "%s: cannot modify partition %d: no partition table was found"
msgstr "%s: kan partitie %d niet aanpassen: geen partitietabel gevonden"

#: disk-utils/sfdisk.c:1599
#, c-format
msgid "%s: cannot modify partition %d: partition table contains only %zu partitions"
msgstr "%s: kan partitie %d niet aanpassen: partitietabel bevat slechts %zu partities"

#: disk-utils/sfdisk.c:1605
#, c-format
msgid "warning: %s: partition %d is not defined yet"
msgstr "waarschuwing: %s: partitie %d is nog niet gedefinieerd"

#: disk-utils/sfdisk.c:1623
#, c-format
msgid ""
"\n"
"Welcome to sfdisk (%s)."
msgstr ""
"\n"
"Welkom bij 'sfdisk' (%s)."

#: disk-utils/sfdisk.c:1631
msgid "Checking that no-one is using this disk right now ..."
msgstr "Even controleren of iemand deze schijf nu gebruikt..."

#: disk-utils/sfdisk.c:1634
msgid ""
" FAILED\n"
"\n"
msgstr ""
" MISLUKT\n"
"\n"

#: disk-utils/sfdisk.c:1637
msgid ""
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"Umount all file systems, and swapoff all swap partitions on this disk.\n"
"Use the --no-reread flag to suppress this check.\n"
msgstr ""
"Deze schijf is in gebruik -- nu herpartitioneren is een slecht idee.\n"
"Koppel eerst alle bestandssystemen af, en schakel met 'swapoff' alle\n"
"wisselgeheugenpartities op deze schijf uit.\n"
"Of gebruik optie '--no-reread' om deze controle te onderdrukken.\n"

#: disk-utils/sfdisk.c:1642
msgid "Use the --force flag to overrule all checks."
msgstr "Gebruik '--force' om alle controles te negeren."

#: disk-utils/sfdisk.c:1644
msgid ""
" OK\n"
"\n"
msgstr ""
"OK\n"
"\n"

#: disk-utils/sfdisk.c:1656
msgid ""
"\n"
"Old situation:"
msgstr ""
"\n"
"Oude situatie:"

#: disk-utils/sfdisk.c:1674
#, c-format
msgid ""
"\n"
"sfdisk is going to create a new '%s' disk label.\n"
"Use 'label: <name>' before you define a first partition\n"
"to override the default."
msgstr ""
"\n"
"sfdisk gaat een nieuw '%s'-schijflabel aanmaken.\n"
"Gebruik 'label: <naam>' om het schijflabeltype te wijzigen\n"
"voordat u de eerste partitie aanmaakt."

#: disk-utils/sfdisk.c:1677
msgid ""
"\n"
"Type 'help' to get more information.\n"
msgstr ""
"\n"
"Typ 'help' voor meer informatie.\n"

#: disk-utils/sfdisk.c:1695
msgid "All partitions used."
msgstr "Alle partities zijn in gebruik."

#: disk-utils/sfdisk.c:1723
msgid "Done.\n"
msgstr "Klaar.\n"

#: disk-utils/sfdisk.c:1735
msgid "Ignoring partition."
msgstr "Partitie wordt genegeerd."

#: disk-utils/sfdisk.c:1744 disk-utils/sfdisk.c:1804
msgid "Failed to apply script headers, disk label not created."
msgstr "Toepassen van scriptkopregels is mislukt; geen schijflabel aangemaakt."

#: disk-utils/sfdisk.c:1763
#, fuzzy, c-format
msgid "Failed to add #%d partition"
msgstr "Toevoegen van partitie is mislukt"

#: disk-utils/sfdisk.c:1786
msgid "Script header accepted."
msgstr "Scriptkopregels zijn geaccepteerd."

#: disk-utils/sfdisk.c:1811
msgid ""
"\n"
"New situation:"
msgstr ""
"\n"
"Nieuwe situatie:"

#: disk-utils/sfdisk.c:1821
msgid "Do you want to write this to disk?"
msgstr "Wilt u dit naar de schijf schrijven?"

#: disk-utils/sfdisk.c:1834
msgid "Leaving.\n"
msgstr "Dag.\n"

#: disk-utils/sfdisk.c:1847
#, c-format
msgid ""
" %1$s [options] <dev> [[-N] <part>]\n"
" %1$s [options] <command>\n"
msgstr ""
"  %1$s [opties] <apparaat> [[-N] <partitienummer>]\n"
"  %1$s [opties] <opdracht>\n"

#: disk-utils/sfdisk.c:1853 sys-utils/blkzone.c:303
msgid ""
"\n"
"Commands:\n"
msgstr ""
"\n"
"Opdrachten:\n"

#: disk-utils/sfdisk.c:1854
msgid " -A, --activate <dev> [<part> ...] list or set bootable MBR partitions\n"
msgstr ""

#: disk-utils/sfdisk.c:1855
msgid " -d, --dump <dev>                  dump partition table (usable for later input)\n"
msgstr ""

# AND exit
#: disk-utils/sfdisk.c:1856
msgid " -J, --json <dev>                  dump partition table in JSON format\n"
msgstr ""

#: disk-utils/sfdisk.c:1857
msgid " -g, --show-geometry [<dev> ...]   list geometry of all or specified devices\n"
msgstr ""

# AND exit
#: disk-utils/sfdisk.c:1858
#, fuzzy
msgid " -l, --list [<dev> ...]            list partitions of each device\n"
msgstr "  -l, --list                 partities tonen en stoppen\n"

# AND exit
#: disk-utils/sfdisk.c:1859
#, fuzzy
msgid " -F, --list-free [<dev> ...]       list unpartitioned free areas of each device\n"
msgstr "  -l, --list                 partities tonen en stoppen\n"

#: disk-utils/sfdisk.c:1860
msgid " -r, --reorder <dev>               fix partitions order (by start offset)\n"
msgstr ""

#: disk-utils/sfdisk.c:1861
msgid " -s, --show-size [<dev> ...]       list sizes of all or specified devices\n"
msgstr ""

#: disk-utils/sfdisk.c:1862
msgid " -T, --list-types                  print the recognized types (see -X)\n"
msgstr ""

# AND exit
#: disk-utils/sfdisk.c:1863
msgid " -V, --verify [<dev> ...]          test whether partitions seem correct\n"
msgstr ""

#: disk-utils/sfdisk.c:1864
#, fuzzy
msgid "     --delete <dev> [<part> ...]   delete all or specified partitions\n"
msgstr "  -d, --delete         gegeven partities (of alle) verwijderen\n"

#: disk-utils/sfdisk.c:1867
msgid " --part-label <dev> <part> [<str>] print or change partition label\n"
msgstr ""

#: disk-utils/sfdisk.c:1868
msgid " --part-type <dev> <part> [<type>] print or change partition type\n"
msgstr ""

#: disk-utils/sfdisk.c:1869
msgid " --part-uuid <dev> <part> [<uuid>] print or change partition uuid\n"
msgstr ""

#: disk-utils/sfdisk.c:1870
msgid " --part-attrs <dev> <part> [<str>] print or change partition attributes\n"
msgstr ""

#: disk-utils/sfdisk.c:1873
msgid " <dev>                     device (usually disk) path\n"
msgstr ""

#: disk-utils/sfdisk.c:1874
msgid " <part>                    partition number\n"
msgstr ""

#: disk-utils/sfdisk.c:1875
msgid " <type>                    partition type, GUID for GPT, hex for MBR\n"
msgstr ""

#: disk-utils/sfdisk.c:1878
msgid " -a, --append              append partitions to existing partition table\n"
msgstr ""

#: disk-utils/sfdisk.c:1879
msgid " -b, --backup              backup partition table sectors (see -O)\n"
msgstr ""

#: disk-utils/sfdisk.c:1880
msgid "     --bytes               print SIZE in bytes rather than in human readable format\n"
msgstr "      --bytes          grootte in bytes weergeven in plaats van in leesbare vorm\n"

#: disk-utils/sfdisk.c:1881
msgid "     --move-data[=<typescript>] move partition data after relocation (requires -N)\n"
msgstr ""

#: disk-utils/sfdisk.c:1882
msgid " -f, --force               disable all consistency checking\n"
msgstr ""

#: disk-utils/sfdisk.c:1883
#, fuzzy
msgid "     --color[=<when>]      colorize output (auto, always or never)\n"
msgstr "  -L, --color[=<wanneer>]    de uitvoer kleuren ('auto', 'always', of 'never')\n"

#: disk-utils/sfdisk.c:1886
msgid " -N, --partno <num>        specify partition number\n"
msgstr ""

#: disk-utils/sfdisk.c:1887
msgid " -n, --no-act              do everything except write to device\n"
msgstr ""

#: disk-utils/sfdisk.c:1888
msgid "     --no-reread           do not check whether the device is in use\n"
msgstr ""

#: disk-utils/sfdisk.c:1889
msgid "     --no-tell-kernel      do not tell kernel about changes\n"
msgstr ""

#: disk-utils/sfdisk.c:1890
msgid " -O, --backup-file <path>  override default backup file name\n"
msgstr ""

#: disk-utils/sfdisk.c:1891
msgid " -o, --output <list>       output columns\n"
msgstr "  -o, --output <lijst>     te tonen kolommen in de uitvoer\n"

#: disk-utils/sfdisk.c:1892
msgid " -q, --quiet               suppress extra info messages\n"
msgstr "  -q, --quiet              extra informatie onderdrukken\n"

#: disk-utils/sfdisk.c:1893
msgid " -w, --wipe <mode>         wipe signatures (auto, always or never)\n"
msgstr "  -w, --wipe <wanneer>     vingerafdrukken wissen ('auto', 'always', 'never')\n"

#: disk-utils/sfdisk.c:1895
msgid " -X, --label <name>        specify label type (dos, gpt, ...)\n"
msgstr ""

#: disk-utils/sfdisk.c:1896
msgid " -Y, --label-nested <name> specify nested label type (dos, bsd)\n"
msgstr ""

#: disk-utils/sfdisk.c:1898
msgid " -G, --show-pt-geometry    deprecated, alias to --show-geometry\n"
msgstr ""

#: disk-utils/sfdisk.c:1899
msgid " -L, --Linux               deprecated, only for backward compatibility\n"
msgstr "  -L, --Linux              (verouderd, slechts herkend voor compatibiliteit)\n"

#: disk-utils/sfdisk.c:1900
msgid " -u, --unit S              deprecated, only sector unit is supported\n"
msgstr ""

# Deze breedte gebruiken, om te passen bij de gewone --help.
#: disk-utils/sfdisk.c:1904 login-utils/chfn.c:107 login-utils/chsh.c:84
msgid " -v, --version  output version information and exit\n"
msgstr "  -v, --version     programmaversie tonen en stoppen\n"

#: disk-utils/sfdisk.c:2018
#, c-format
msgid "%s is deprecated in favour of --part-type"
msgstr "optie '%s' is verouderd; gebruik '--part-type'"

#: disk-utils/sfdisk.c:2023
msgid "--id is deprecated in favour of --part-type"
msgstr "optie '--id' is verouderd; gebruik '--part-type'"

#: disk-utils/sfdisk.c:2039
msgid "--show-pt-geometry is no more implemented. Using --show-geometry."
msgstr ""

#: disk-utils/sfdisk.c:2051
msgid "--Linux option is unnecessary and deprecated"
msgstr "de optie '--Linux' is onnodig en verouderd"

#: disk-utils/sfdisk.c:2080
#, c-format
msgid "unsupported unit '%c'"
msgstr "niet-ondersteunde eenheid '%c'"

#: disk-utils/sfdisk.c:2083 include/c.h:325
#, c-format
msgid "%s from %s\n"
msgstr "'%s' uit %s\n"

#: disk-utils/sfdisk.c:2160
msgid "--movedata requires -N"
msgstr "optie '--movedata' vereist '-N'"

#: disk-utils/swaplabel.c:69
#, c-format
msgid "failed to parse UUID: %s"
msgstr "ontleden van UUID '%s' is mislukt"

#: disk-utils/swaplabel.c:73
#, c-format
msgid "%s: failed to seek to swap UUID"
msgstr "%s: 'seek' naar wisselgeheugen-UUID is mislukt"

#: disk-utils/swaplabel.c:77
#, c-format
msgid "%s: failed to write UUID"
msgstr "%s: schrijven van wisselgeheugen-UUID is mislukt"

#: disk-utils/swaplabel.c:88
#, c-format
msgid "%s: failed to seek to swap label "
msgstr "%s: 'seek' naar wisselgeheugenlabel is mislukt"

#: disk-utils/swaplabel.c:95
#, c-format
msgid "label is too long. Truncating it to '%s'"
msgstr "label is te lang; wordt afgekapt tot '%s'"

#: disk-utils/swaplabel.c:98
#, c-format
msgid "%s: failed to write label"
msgstr "%s: schrijven van label is mislukt"

#: disk-utils/swaplabel.c:121
msgid "Display or change the label or UUID of a swap area.\n"
msgstr "Toont of wijzigt het label of de UUID van een wisselgeheugengebied.\n"

#: disk-utils/swaplabel.c:124
msgid ""
" -L, --label <label> specify a new label\n"
" -U, --uuid <uuid>   specify a new uuid\n"
msgstr ""
"  -L, --label <label>   te gebruiken nieuw label\n"
"  -U, --uuid <UUID>     te gebruiken nieuwe UUID\n"

#: disk-utils/swaplabel.c:167
msgid "ignore -U (UUIDs are unsupported)"
msgstr "optie '-U' wordt genegeerd (UUID's worden niet ondersteund)"

#: include/c.h:214
#, fuzzy, c-format
msgid "Try '%s --help' for more information.\n"
msgstr "Typ '%s --help' voor meer informatie.\n"

#: include/c.h:220
#, fuzzy, c-format
msgid "Try '%s -h' for more information.\n"
msgstr "Typ '%s --help' voor meer informatie.\n"

#: include/c.h:318
msgid ""
"\n"
"Usage:\n"
msgstr ""
"\n"
"Gebruik:\n"

#: include/c.h:319
msgid ""
"\n"
"Options:\n"
msgstr ""
"\n"
"Opties:\n"

#: include/c.h:321
msgid " -h, --help     display this help and exit\n"
msgstr "  -h, --help        deze hulptekst tonen en stoppen\n"

#: include/c.h:322
msgid " -V, --version  output version information and exit\n"
msgstr "  -V, --version     programmaversie tonen en stoppen\n"

#: include/c.h:323
#, c-format
msgid ""
"\n"
"For more details see %s.\n"
msgstr ""
"\n"
"Voor meer informatie zie %s.\n"

#: include/closestream.h:46 include/closestream.h:48 login-utils/vipw.c:274
#: login-utils/vipw.c:293 sys-utils/rtcwake.c:280 term-utils/setterm.c:812
#: text-utils/col.c:157
msgid "write error"
msgstr "schrijffout"

#: include/colors.h:27
msgid "colors are enabled by default"
msgstr "kleuren zijn standaard ingeschakeld"

#: include/colors.h:29
msgid "colors are disabled by default"
msgstr "kleuren zijn standaard uitgeschakeld"

#: include/env.h:18 lib/pager.c:151 login-utils/login.c:1036
#: login-utils/login.c:1040 login-utils/su-common.c:520
#: term-utils/agetty.c:1146
#, c-format
msgid "failed to set the %s environment variable"
msgstr "instellen van omgevingsvariabele %s is mislukt"

#: include/optutils.h:85
#, fuzzy, c-format
msgid "%s: mutually exclusive arguments:"
msgstr "opties gaan niet samen."

#: include/pt-mbr-partnames.h:1
msgid "Empty"
msgstr "leeg"

#: include/pt-mbr-partnames.h:2
msgid "FAT12"
msgstr "FAT12"

#: include/pt-mbr-partnames.h:3
msgid "XENIX root"
msgstr "XENIX root"

#: include/pt-mbr-partnames.h:4
msgid "XENIX usr"
msgstr "XENIX usr"

#: include/pt-mbr-partnames.h:5
msgid "FAT16 <32M"
msgstr "FAT16 <32M"

#: include/pt-mbr-partnames.h:6
msgid "Extended"
msgstr "uitgebreid"

#: include/pt-mbr-partnames.h:7
msgid "FAT16"
msgstr "FAT16"

#: include/pt-mbr-partnames.h:8
msgid "HPFS/NTFS/exFAT"
msgstr "HPFS/NTFS/exFAT"

#: include/pt-mbr-partnames.h:9
msgid "AIX"
msgstr "AIX"

#: include/pt-mbr-partnames.h:10
msgid "AIX bootable"
msgstr "AIX opstartbaar"

#: include/pt-mbr-partnames.h:11
msgid "OS/2 Boot Manager"
msgstr "OS/2 opstartmanager"

#: include/pt-mbr-partnames.h:12
msgid "W95 FAT32"
msgstr "W95 FAT32"

#: include/pt-mbr-partnames.h:13
msgid "W95 FAT32 (LBA)"
msgstr "W95 FAT32 (LBA)"

#: include/pt-mbr-partnames.h:14
msgid "W95 FAT16 (LBA)"
msgstr "W95 FAT16 (LBA)"

#: include/pt-mbr-partnames.h:15
msgid "W95 Ext'd (LBA)"
msgstr "W95 uitgeb. (LBA)"

#: include/pt-mbr-partnames.h:16
msgid "OPUS"
msgstr "OPUS"

#: include/pt-mbr-partnames.h:17
msgid "Hidden FAT12"
msgstr "verborgen FAT12"

#: include/pt-mbr-partnames.h:18
msgid "Compaq diagnostics"
msgstr "Compaq diagnostiek"

#: include/pt-mbr-partnames.h:19
msgid "Hidden FAT16 <32M"
msgstr "verborgen FAT16 <32M"

#: include/pt-mbr-partnames.h:20
msgid "Hidden FAT16"
msgstr "verborgen FAT16"

#: include/pt-mbr-partnames.h:21
msgid "Hidden HPFS/NTFS"
msgstr "verborgen HPFS/NTFS"

#: include/pt-mbr-partnames.h:22
msgid "AST SmartSleep"
msgstr "AST SmartSleep"

#: include/pt-mbr-partnames.h:23
msgid "Hidden W95 FAT32"
msgstr "verborgen W95 FAT32"

#: include/pt-mbr-partnames.h:24
msgid "Hidden W95 FAT32 (LBA)"
msgstr "verb. W95 FAT32 (LBA)"

#: include/pt-mbr-partnames.h:25
msgid "Hidden W95 FAT16 (LBA)"
msgstr "verb. W95 FAT16 (LBA)"

#: include/pt-mbr-partnames.h:26
msgid "NEC DOS"
msgstr "NEC DOS"

#: include/pt-mbr-partnames.h:27
msgid "Hidden NTFS WinRE"
msgstr "verborgen NTFS WinRE"

#: include/pt-mbr-partnames.h:28
msgid "Plan 9"
msgstr "Plan 9"

#: include/pt-mbr-partnames.h:29
msgid "PartitionMagic recovery"
msgstr "PartitionMagic recovery"

#: include/pt-mbr-partnames.h:30
msgid "Venix 80286"
msgstr "Venix 80286"

#: include/pt-mbr-partnames.h:31
msgid "PPC PReP Boot"
msgstr "PPC PReP opstart"

#: include/pt-mbr-partnames.h:32
msgid "SFS"
msgstr "SFS"

#: include/pt-mbr-partnames.h:33
msgid "QNX4.x"
msgstr "QNX4.x"

#: include/pt-mbr-partnames.h:34
msgid "QNX4.x 2nd part"
msgstr "QNX4.x 2de deel"

#: include/pt-mbr-partnames.h:35
msgid "QNX4.x 3rd part"
msgstr "QNX4.x 3de deel"

#: include/pt-mbr-partnames.h:36
msgid "OnTrack DM"
msgstr "OnTrack DM"

#: include/pt-mbr-partnames.h:37
msgid "OnTrack DM6 Aux1"
msgstr "OnTrack DM6 Aux1"

#: include/pt-mbr-partnames.h:38
msgid "CP/M"
msgstr "CP/M"

#: include/pt-mbr-partnames.h:39
msgid "OnTrack DM6 Aux3"
msgstr "OnTrack DM6 Aux3"

#: include/pt-mbr-partnames.h:40
msgid "OnTrackDM6"
msgstr "OnTrack DM6"

#: include/pt-mbr-partnames.h:41
msgid "EZ-Drive"
msgstr "EZ-Drive"

#: include/pt-mbr-partnames.h:42
msgid "Golden Bow"
msgstr "Golden Bow"

#: include/pt-mbr-partnames.h:43
msgid "Priam Edisk"
msgstr "Priam Edisk"

#: include/pt-mbr-partnames.h:44 include/pt-mbr-partnames.h:91
#: include/pt-mbr-partnames.h:98 include/pt-mbr-partnames.h:99
msgid "SpeedStor"
msgstr "SpeedStor"

#: include/pt-mbr-partnames.h:45
msgid "GNU HURD or SysV"
msgstr "GNU HURD / SysV"

#: include/pt-mbr-partnames.h:46
msgid "Novell Netware 286"
msgstr "Novell Netware 286"

#: include/pt-mbr-partnames.h:47
msgid "Novell Netware 386"
msgstr "Novell Netware 386"

#: include/pt-mbr-partnames.h:48
msgid "DiskSecure Multi-Boot"
msgstr "DiskSecure MultiBoot"

#: include/pt-mbr-partnames.h:49
msgid "PC/IX"
msgstr "PC/IX"

#: include/pt-mbr-partnames.h:50
msgid "Old Minix"
msgstr "oude Minix"

#: include/pt-mbr-partnames.h:51
msgid "Minix / old Linux"
msgstr "Minix / oude Linux"

#: include/pt-mbr-partnames.h:52
msgid "Linux swap / Solaris"
msgstr "Linux wisselgeheugen"

#: include/pt-mbr-partnames.h:53
msgid "Linux"
msgstr "Linux"

#: include/pt-mbr-partnames.h:54
msgid "OS/2 hidden or Intel hibernation"
msgstr "OS/2 verborgen of Intel hibernatie"

#: include/pt-mbr-partnames.h:57
msgid "Linux extended"
msgstr "Linux uitgebreid"

#: include/pt-mbr-partnames.h:58 include/pt-mbr-partnames.h:59
msgid "NTFS volume set"
msgstr "NTFS volumenset"

#: include/pt-mbr-partnames.h:60
msgid "Linux plaintext"
msgstr "Linux plaintext"

#: include/pt-mbr-partnames.h:61 libfdisk/src/gpt.c:204 libfdisk/src/sgi.c:62
#: libfdisk/src/sun.c:53
msgid "Linux LVM"
msgstr "Linux LVM"

#: include/pt-mbr-partnames.h:62
msgid "Amoeba"
msgstr "Amoeba"

#: include/pt-mbr-partnames.h:63
msgid "Amoeba BBT"
msgstr "Amoeba BBT"

#: include/pt-mbr-partnames.h:64
msgid "BSD/OS"
msgstr "BSD/OS"

#: include/pt-mbr-partnames.h:65
msgid "IBM Thinkpad hibernation"
msgstr "IBM Thinkpad hibernatie"

#: include/pt-mbr-partnames.h:66
msgid "FreeBSD"
msgstr "FreeBSD"

#: include/pt-mbr-partnames.h:67
msgid "OpenBSD"
msgstr "OpenBSD"

#: include/pt-mbr-partnames.h:68
msgid "NeXTSTEP"
msgstr "NeXTSTEP"

#: include/pt-mbr-partnames.h:69
msgid "Darwin UFS"
msgstr "Darwin UFS"

#: include/pt-mbr-partnames.h:70
msgid "NetBSD"
msgstr "NetBSD"

#: include/pt-mbr-partnames.h:71
msgid "Darwin boot"
msgstr "Darwin opstart"

#: include/pt-mbr-partnames.h:72
msgid "HFS / HFS+"
msgstr "HFS / HFS+"

#: include/pt-mbr-partnames.h:73
msgid "BSDI fs"
msgstr "BSDI-bestandssysteem"

#: include/pt-mbr-partnames.h:74
msgid "BSDI swap"
msgstr "BSDI-wisselgeheugen"

#: include/pt-mbr-partnames.h:75
msgid "Boot Wizard hidden"
msgstr "BootWizard verborgen"

#: include/pt-mbr-partnames.h:76
msgid "Acronis FAT32 LBA"
msgstr "Acronis FAT32 (LBA)"

#: include/pt-mbr-partnames.h:77 libfdisk/src/gpt.c:229
msgid "Solaris boot"
msgstr "Solaris opstart"

#: include/pt-mbr-partnames.h:78
msgid "Solaris"
msgstr "Solaris"

#: include/pt-mbr-partnames.h:79
msgid "DRDOS/sec (FAT-12)"
msgstr "DRDOS/sec (FAT12)"

#: include/pt-mbr-partnames.h:80
msgid "DRDOS/sec (FAT-16 < 32M)"
msgstr "DRDOS/sec (FAT16 <32M)"

#: include/pt-mbr-partnames.h:81
msgid "DRDOS/sec (FAT-16)"
msgstr "DRDOS/sec (FAT16)"

#: include/pt-mbr-partnames.h:82
msgid "Syrinx"
msgstr "Syrinx"

#: include/pt-mbr-partnames.h:83
msgid "Non-FS data"
msgstr "non-BS-gegevens"

#: include/pt-mbr-partnames.h:84
msgid "CP/M / CTOS / ..."
msgstr "CP/M / CTOS / ..."

#: include/pt-mbr-partnames.h:86
msgid "Dell Utility"
msgstr "Dell Utility"

#: include/pt-mbr-partnames.h:87
msgid "BootIt"
msgstr "BootIt"

#: include/pt-mbr-partnames.h:88
msgid "DOS access"
msgstr "DOS access"

#: include/pt-mbr-partnames.h:90
msgid "DOS R/O"
msgstr "DOS R/O"

#: include/pt-mbr-partnames.h:93
msgid "Rufus alignment"
msgstr "Rufus uitlijning"

#: include/pt-mbr-partnames.h:94
msgid "BeOS fs"
msgstr "BeOS bestandssysteem"

#: include/pt-mbr-partnames.h:96
msgid "EFI (FAT-12/16/32)"
msgstr "EFI (FAT-12/16/32)"

#: include/pt-mbr-partnames.h:97
msgid "Linux/PA-RISC boot"
msgstr "Linux/PA-RISC opstart"

#: include/pt-mbr-partnames.h:100
msgid "DOS secondary"
msgstr "DOS secundair"

#: include/pt-mbr-partnames.h:101
msgid "VMware VMFS"
msgstr "VMware VMFS"

#: include/pt-mbr-partnames.h:102
msgid "VMware VMKCORE"
msgstr "VMware vmkcore"

#: include/pt-mbr-partnames.h:103 libfdisk/src/sun.c:54
msgid "Linux raid autodetect"
msgstr "Linux raidautodetectie"

#: include/pt-mbr-partnames.h:106
msgid "LANstep"
msgstr "LANstep"

#: include/pt-mbr-partnames.h:107
msgid "BBT"
msgstr "BBT"

#: lib/blkdev.c:282
#, c-format
msgid "warning: %s is misaligned"
msgstr "waarschuwing: %s is geen blok-apparaat"

#: libfdisk/src/alignment.c:698
msgid "Calling ioctl() to re-read partition table."
msgstr "Aanroepen van ioctl() om partitietabel opnieuw in te lezen..."

#: libfdisk/src/alignment.c:707
msgid "Re-reading the partition table failed."
msgstr "Herinlezen van partitietabel is mislukt."

#: libfdisk/src/alignment.c:709
msgid "The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8)."
msgstr ""
"De kernel gebruikt nog de oude tabel.  De nieuwe tabel wordt alleen na\n"
"opnieuw opstarten gebruikt, of na uitvoeren van partprobe(8) of kpartx(8)."

#: libfdisk/src/ask.c:472 libfdisk/src/ask.c:484
#, c-format
msgid "Selected partition %ju"
msgstr "Geselecteerde partitie is %ju"

#: libfdisk/src/ask.c:475
msgid "No partition is defined yet!"
msgstr "Er zijn nog geen partities gedefinieerd!"

#: libfdisk/src/ask.c:487
msgid "No free partition available!"
msgstr "Geen vrije partitie beschikbaar!"

#: libfdisk/src/ask.c:497
msgid "Partition number"
msgstr "Partitienummer"

#: libfdisk/src/ask.c:994
#, c-format
msgid "Created a new partition %d of type '%s' and of size %s."
msgstr "Nieuwe partitie %d van type '%s' en grootte %s is aangemaakt."

#: libfdisk/src/bsd.c:165
#, c-format
msgid "Partition %zd: has invalid starting sector 0."
msgstr "Partitie %zd heeft ongeldige beginsector 0."

#: libfdisk/src/bsd.c:180
#, c-format
msgid "There is no *BSD partition on %s."
msgstr "Er is geen *BSD-partitie op %s."

#: libfdisk/src/bsd.c:258 libfdisk/src/dos.c:964
msgid "First cylinder"
msgstr "Eerste cilinder"

#: libfdisk/src/bsd.c:291 libfdisk/src/dos.c:1195
msgid "Last cylinder, +cylinders or +size{K,M,G,T,P}"
msgstr "Laatste cilinder, +cilinders, of +grootte{K,M,G,T,P}"

#: libfdisk/src/bsd.c:296 libfdisk/src/dos.c:1200 libfdisk/src/gpt.c:2337
msgid "Last sector, +sectors or +size{K,M,G,T,P}"
msgstr "Laatste sector, +sectoren, of +grootte{K,M,G,T,P}"

#: libfdisk/src/bsd.c:380
#, c-format
msgid "The device %s does not contain BSD disklabel."
msgstr "Apparaat %s bevat geen BSD-schijflabel."

#: libfdisk/src/bsd.c:382
msgid "Do you want to create a BSD disklabel?"
msgstr "Wilt u een BSD-schijflabel aanmaken?"

#: libfdisk/src/bsd.c:448
msgid "Disk"
msgstr "Schijf"

#: libfdisk/src/bsd.c:455
msgid "Packname"
msgstr ""

#: libfdisk/src/bsd.c:462 libfdisk/src/sun.c:1120
msgid "Flags"
msgstr "Vlag"

#: libfdisk/src/bsd.c:465
msgid " removable"
msgstr " verwijderbaar"

#: libfdisk/src/bsd.c:466
msgid " ecc"
msgstr " ecc"

#: libfdisk/src/bsd.c:467
msgid " badsect"
msgstr " slechte_sectoren"

#: libfdisk/src/bsd.c:475
msgid "Bytes/Sector"
msgstr "Bytes/Sector"

#: libfdisk/src/bsd.c:480
msgid "Tracks/Cylinder"
msgstr "Sporen/Cilinder"

#: libfdisk/src/bsd.c:485
msgid "Sectors/Cylinder"
msgstr "Sectoren/Cilinder"

#: libfdisk/src/bsd.c:490 libfdisk/src/bsd.c:1020 libfdisk/src/dos.c:2393
#: libfdisk/src/sgi.c:1156 libfdisk/src/sun.c:199 libfdisk/src/sun.c:1116
msgid "Cylinders"
msgstr "Cilinders"

#: libfdisk/src/bsd.c:495 libfdisk/src/sun.c:763
msgid "Rpm"
msgstr "RPM"

#: libfdisk/src/bsd.c:500 libfdisk/src/sgi.c:291 libfdisk/src/sun.c:783
msgid "Interleave"
msgstr "Tussenruimte"

#: libfdisk/src/bsd.c:505
msgid "Trackskew"
msgstr "Trackskew"

#: libfdisk/src/bsd.c:510
msgid "Cylinderskew"
msgstr "Cilinderskew"

#: libfdisk/src/bsd.c:515
msgid "Headswitch"
msgstr "Kopoverschakeling"

#: libfdisk/src/bsd.c:520
msgid "Track-to-track seek"
msgstr "Spoor-tot-spoor 'seek'"

#: libfdisk/src/bsd.c:610
msgid "bytes/sector"
msgstr "bytes/sector"

#: libfdisk/src/bsd.c:613
msgid "sectors/track"
msgstr "sectoren/spoor"

#: libfdisk/src/bsd.c:614
msgid "tracks/cylinder"
msgstr "sporen/cilinder"

#: libfdisk/src/bsd.c:615
msgid "cylinders"
msgstr "cilinders"

#: libfdisk/src/bsd.c:619
msgid "sectors/cylinder"
msgstr "sectoren/cilinder"

#: libfdisk/src/bsd.c:622
msgid "rpm"
msgstr "rpm"

#: libfdisk/src/bsd.c:623
msgid "interleave"
msgstr "tussenruimte"

#: libfdisk/src/bsd.c:624
msgid "trackskew"
msgstr "trackskew"

#: libfdisk/src/bsd.c:625
msgid "cylinderskew"
msgstr "cilinderskew"

#: libfdisk/src/bsd.c:627
msgid "headswitch"
msgstr "overschakelen van kop"

#: libfdisk/src/bsd.c:628
msgid "track-to-track seek"
msgstr "spoor-tot-spoor 'seek'"

#: libfdisk/src/bsd.c:650
#, c-format
msgid "The bootstrap file %s successfully loaded."
msgstr "Bootstrap-bestand %s is met succes geladen."

#: libfdisk/src/bsd.c:672
#, c-format
msgid "Bootstrap: %1$sboot -> boot%1$s (default %1$s)"
msgstr "Bootstrap: %1$sboot -> boot%1$s (standaard %1$s)"

#: libfdisk/src/bsd.c:703
msgid "Bootstrap overlaps with disklabel!"
msgstr "Bootstrap overlapt met schijflabel!"

#: libfdisk/src/bsd.c:727
#, c-format
msgid "Bootstrap installed on %s."
msgstr "Bootstrap is geïnstalleerd op %s."

#: libfdisk/src/bsd.c:902
#, c-format
msgid "Disklabel written to %s.  (Don't forget to write the %s disklabel too.)"
msgstr "Schijflabel is geschreven naar %s.  (Vergeet niet om ook het %s-label te schrijven.)"

#: libfdisk/src/bsd.c:905
#, c-format
msgid "Disklabel written to %s."
msgstr "Schijflabel is geschreven naar %s."

#: libfdisk/src/bsd.c:911 libfdisk/src/context.c:641
msgid "Syncing disks."
msgstr "Leegmaken van schijfbuffers..."

#: libfdisk/src/bsd.c:952
msgid "BSD label is not nested within a DOS partition."
msgstr "BSD-label is niet genest binnen een DOS-partitie."

#: libfdisk/src/bsd.c:980
#, c-format
msgid "BSD partition '%c' linked to DOS partition %zu."
msgstr "BSD-partitie '%c' is gekoppeld aan DOS-partitie %zu."

#: libfdisk/src/bsd.c:1016
msgid "Slice"
msgstr "Slice"

#: libfdisk/src/bsd.c:1023
msgid "Fsize"
msgstr ""

#: libfdisk/src/bsd.c:1024
msgid "Bsize"
msgstr ""

#: libfdisk/src/bsd.c:1025
msgid "Cpg"
msgstr ""

#: libfdisk/src/context.c:635
#, c-format
msgid "%s: close device failed"
msgstr "%s: sluiten van apparaat is mislukt"

#: libfdisk/src/context.c:814
msgid "cylinder"
msgid_plural "cylinders"
msgstr[0] "cilinder"
msgstr[1] "cilinders"

#: libfdisk/src/context.c:815
msgid "sector"
msgid_plural "sectors"
msgstr[0] "sector"
msgstr[1] "sectoren"

#: libfdisk/src/context.c:1118
msgid "Incomplete geometry setting."
msgstr "Onvolledige geometrie-instelling."

#: libfdisk/src/dos.c:213
msgid "All primary partitions have been defined already."
msgstr "Alle primaire partities zijn al gedefinieerd."

#: libfdisk/src/dos.c:267
#, c-format
msgid "Failed to read extended partition table (offset=%ju)"
msgstr "Lezen van uitgebreide partitietabel is mislukt (positie=%ju)"

#: libfdisk/src/dos.c:337
msgid "You can set geometry from the extra functions menu."
msgstr "U kunt de geometrie instellen in het menu met extra functies."

#: libfdisk/src/dos.c:340
msgid "DOS-compatible mode is deprecated."
msgstr "DOS-compatibiliteitsmodus is verouderd."

#: libfdisk/src/dos.c:344
msgid "The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted."
msgstr ""
"Op het apparaat is de logische sectorgrootte kleiner dan de fysieke.\n"
"Uitlijning op een fysieke sectorgrens (of optimale in-/uitvoergrootte)\n"
"wordt aangeraden, anders kunnen de prestaties er onder lijden."

#: libfdisk/src/dos.c:350
msgid "Cylinders as display units are deprecated."
msgstr "Cilinders als weergave-eenheid zijn verouderd."

#: libfdisk/src/dos.c:357
#, fuzzy, c-format
msgid "The size of this disk is %s (%ju bytes). DOS partition table format cannot be used on drives for volumes larger than %lu bytes for %lu-byte sectors. Use GUID partition table format (GPT)."
msgstr ""
"WAARSCHUWING: De grootte van deze schijf is %s (%ju bytes).\n"
"Een DOS-partitietabel is niet mogelijk op volumens die groter\n"
"zijn dan %lu bytes (bij sectoren van %lu bytes).\n"
"Gebruik GNU parted(1) en een GUID-partitietabel (GPT)."

#: libfdisk/src/dos.c:516
msgid "Bad offset in primary extended partition."
msgstr "Ongeldige plaats in primaire uitgebreide partitie."

#: libfdisk/src/dos.c:530
#, c-format
msgid "Omitting partitions after #%zu. They will be deleted if you save this partition table."
msgstr ""
"Partities na #%zu worden weggelaten.\n"
"Ze zullen worden *verwijderd* als u deze partitietabel opslaat."

#: libfdisk/src/dos.c:563
#, c-format
msgid "Extra link pointer in partition table %zu."
msgstr "Extra koppelingsverwijzer in partitietabel %zu."

#: libfdisk/src/dos.c:571
#, c-format
msgid "Ignoring extra data in partition table %zu."
msgstr "Extra gegevens in partitietabel %zu worden genegeerd."

#: libfdisk/src/dos.c:627
#, c-format
msgid "omitting empty partition (%zu)"
msgstr "lege partitie (%zu) wordt weggelaten"

#: libfdisk/src/dos.c:687
#, c-format
msgid "Created a new DOS disklabel with disk identifier 0x%08x."
msgstr "Nieuw DOS-schijflabel is aangemaakt met schijf-ID 0x%08x."

#: libfdisk/src/dos.c:708
msgid "Enter the new disk identifier"
msgstr "Voer de nieuwe schijf-ID in"

#: libfdisk/src/dos.c:715
msgid "Incorrect value."
msgstr "Ongeldige waarde."

#: libfdisk/src/dos.c:724
#, c-format
msgid "Disk identifier changed from 0x%08x to 0x%08x."
msgstr "Schijf-ID is gewijzigd van 0x%08x naar 0x%08x."

#: libfdisk/src/dos.c:820
#, c-format
msgid "Ignoring extra extended partition %zu"
msgstr "Extra uitgebreide partitie %zu wordt genegeerd."

#: libfdisk/src/dos.c:834
#, c-format
msgid "Invalid flag 0x%02x%02x of EBR (for partition %zu) will be corrected by w(rite)."
msgstr "Onjuiste optie 0x%02x%02x van EBR (voor partitie %zu) zal worden gecorrigeerd bij het schrijven."

#: libfdisk/src/dos.c:951
#, c-format
msgid "Start sector %ju out of range."
msgstr "Startsector %ju valt buiten bereik."

#: libfdisk/src/dos.c:1058 libfdisk/src/gpt.c:2217 libfdisk/src/sgi.c:838
#: libfdisk/src/sun.c:520
#, c-format
msgid "Partition %zu is already defined.  Delete it before re-adding it."
msgstr "Partitie %zu is al gedefinieerd.  Verwijder deze eerst, en voeg hem dan opnieuw toe."

#: libfdisk/src/dos.c:1128
#, c-format
msgid "Sector %llu is already allocated."
msgstr "Sector %llu is al gereserveerd."

#: libfdisk/src/dos.c:1167 libfdisk/src/gpt.c:2226
msgid "No free sectors available."
msgstr "Geen vrije sectoren beschikbaar."

#: libfdisk/src/dos.c:1323
#, c-format
msgid "Adding logical partition %zu"
msgstr "Logische partitie %zu wordt toegevoegd."

#: libfdisk/src/dos.c:1354
#, c-format
msgid "Partition %zu: contains sector 0"
msgstr "Partitie %zu bevat sector 0."

#: libfdisk/src/dos.c:1356
#, c-format
msgid "Partition %zu: head %d greater than maximum %d"
msgstr "Partitie %zu: kopnummer %d is groter dan maximum %d"

#: libfdisk/src/dos.c:1359
#, c-format
msgid "Partition %zu: sector %d greater than maximum %llu"
msgstr "Partitie %zu: sectornummer %d is groter dan maximum %llu"

#: libfdisk/src/dos.c:1362
#, c-format
msgid "Partition %zu: cylinder %d greater than maximum %llu"
msgstr "Partitie %zu: cilindernummer %d is groter dan maximum %llu"

#: libfdisk/src/dos.c:1368
#, c-format
msgid "Partition %zu: previous sectors %u disagrees with total %u"
msgstr "Partitie %zu: einde van vorige partitie in sectoren %u verschilt van totaal %u"

#: libfdisk/src/dos.c:1421
#, c-format
msgid "Partition %zu: different physical/logical beginnings (non-Linux?): phys=(%d, %d, %d), logical=(%d, %d, %d)"
msgstr "Partitie %zu heeft verschillende fysieke/logische eindpunten (niet-Linux?): fysiek=(%d, %d, %d), logisch=(%d, %d, %d)."

#: libfdisk/src/dos.c:1432
#, c-format
msgid "Partition %zu: different physical/logical endings: phys=(%d, %d, %d), logical=(%d, %d, %d)"
msgstr "Partitie %zu heeft verschillende fysieke/logische eindpunten: fysiek=(%d, %d, %d), logisch=(%d, %d, %d)."

#: libfdisk/src/dos.c:1441
#, c-format
msgid "Partition %zu: does not end on cylinder boundary."
msgstr "Partitie %zu eindigt niet op een cilindergrens."

#: libfdisk/src/dos.c:1468
#, c-format
msgid "Partition %zu: bad start-of-data."
msgstr "Partitie %zu heeft onjuist begin van gegevensgebied."

#: libfdisk/src/dos.c:1481
#, c-format
msgid "Partition %zu: overlaps partition %zu."
msgstr "Partitie %zu overlapt partitie %zu."

#: libfdisk/src/dos.c:1509
#, c-format
msgid "Partition %zu: empty."
msgstr "Partitie %zu is leeg."

#: libfdisk/src/dos.c:1514
#, c-format
msgid "Logical partition %zu: not entirely in partition %zu."
msgstr "Logische partitie %zu ligt niet geheel binnen partitie %zu."

#: libfdisk/src/dos.c:1522
#, c-format
msgid "Total allocated sectors %llu greater than the maximum %llu."
msgstr "Totaal aantal gereserveerde sectoren (%llu) is groter dan maximum %llu."

#: libfdisk/src/dos.c:1525
#, c-format
msgid "Remaining %lld unallocated %ld-byte sectors."
msgstr "Er resteren %lld niet-gereserveerde sectoren van %ld bytes."

#: libfdisk/src/dos.c:1573 libfdisk/src/dos.c:2028
msgid "Extended partition already exists."
msgstr "Uitgebreide partitie bestaat al."

#: libfdisk/src/dos.c:1635
msgid "The maximum number of partitions has been created."
msgstr "Het maximum aantal partities is aangemaakt."

#: libfdisk/src/dos.c:1647
msgid "All primary partitions are in use."
msgstr "Alle primaire partities zijn in gebruik."

#: libfdisk/src/dos.c:1649 libfdisk/src/dos.c:1660
msgid "All space for primary partitions is in use."
msgstr "Alle ruimte voor primaire partities is in gebruik."

#. TRANSLATORS: Try to keep this within 80 characters.
#: libfdisk/src/dos.c:1663
msgid "To create more partitions, first replace a primary with an extended partition."
msgstr "Vervang voor meer partities eerst een primaire partitie door een uitgebreide."

#: libfdisk/src/dos.c:1668
msgid "All logical partitions are in use. Adding a primary partition."
msgstr "Alle logische partities zijn in gebruik.  Een primaire partitie wordt toegevoegd."

#: libfdisk/src/dos.c:1690
msgid "Partition type"
msgstr "Partitietype"

#: libfdisk/src/dos.c:1694
#, c-format
msgid "%zu primary, %d extended, %zu free"
msgstr "%zu primair,  %d uitgebreid,  %zu vrij"

#: libfdisk/src/dos.c:1699
msgid "primary"
msgstr "primair"

#: libfdisk/src/dos.c:1701
msgid "extended"
msgstr "uitgebreid"

#: libfdisk/src/dos.c:1701
msgid "container for logical partitions"
msgstr "container voor logische partities"

#: libfdisk/src/dos.c:1703
msgid "logical"
msgstr "logisch"

#: libfdisk/src/dos.c:1703
msgid "numbered from 5"
msgstr "genummerd vanaf 5"

#: libfdisk/src/dos.c:1741
#, c-format
msgid "Invalid partition type `%c'."
msgstr "Ongeldig partitietype '%c'."

#: libfdisk/src/dos.c:1759
#, c-format
msgid "Cannot write sector %jd: seek failed"
msgstr "Kan sector %jd niet schrijven: 'seek' is mislukt"

#: libfdisk/src/dos.c:1919 libfdisk/src/gpt.c:1138
msgid "Disk identifier"
msgstr "Schijf-ID"

#: libfdisk/src/dos.c:2033
msgid "Type 0 means free space to many systems. Having partitions of type 0 is probably unwise."
msgstr ""
"Type 0 betekent op veel systemen 'vrije ruimte'.  Het is daarom\n"
"vermoedelijk onverstandig om partities van het type 0 te hebben."

#: libfdisk/src/dos.c:2038
msgid "Cannot change type of the extended partition which is already used by logical partitions. Delete logical partitions first."
msgstr "Kan het type van een uitgebreide partitie die al door logische partities gebruikt wordt niet wijzigen.  Verwijder eerst de logische partities."

#: libfdisk/src/dos.c:2224 libfdisk/src/gpt.c:2922
msgid "Nothing to do. Ordering is correct already."
msgstr "Er hoeft niets gedaan te worden.  De ordening is al goed."

#: libfdisk/src/dos.c:2279
#, c-format
msgid "Partition %zu: no data area."
msgstr "Partitie %zu heeft geen gegevensgebied."

#: libfdisk/src/dos.c:2312
msgid "New beginning of data"
msgstr "Nieuw begin van gegevens"

#: libfdisk/src/dos.c:2368
#, c-format
msgid "Partition %zu: is an extended partition."
msgstr "Partitie %zu is een uitgebreide partitie."

#: libfdisk/src/dos.c:2374
#, c-format
msgid "The bootable flag on partition %zu is enabled now."
msgstr "De opstartbaarvlag op partitie %zu is nu ingeschakeld."

#: libfdisk/src/dos.c:2375
#, c-format
msgid "The bootable flag on partition %zu is disabled now."
msgstr "De opstartbaarvlag op partitie %zu is nu uitgeschakeld."

#: libfdisk/src/dos.c:2388 libfdisk/src/gpt.c:3012 libfdisk/src/sgi.c:1152
#: libfdisk/src/sun.c:1112
msgid "Device"
msgstr "Apparaat"

#: libfdisk/src/dos.c:2389 libfdisk/src/sun.c:40
msgid "Boot"
msgstr "Op."

#: libfdisk/src/dos.c:2395 libfdisk/src/sgi.c:1158 libfdisk/src/sun.c:1118
msgid "Id"
msgstr "ID"

#: libfdisk/src/dos.c:2399
msgid "Start-C/H/S"
msgstr "Begin-C/K/S"

#: libfdisk/src/dos.c:2400
msgid "End-C/H/S"
msgstr "Eind-C/K/S"

#: libfdisk/src/dos.c:2401 libfdisk/src/gpt.c:3022 libfdisk/src/sgi.c:1160
msgid "Attrs"
msgstr "Kenm."

#: libfdisk/src/gpt.c:159
msgid "EFI System"
msgstr "EFI-systeem"

#: libfdisk/src/gpt.c:161
msgid "MBR partition scheme"
msgstr "MBR-partitieschema"

#: libfdisk/src/gpt.c:162
msgid "Intel Fast Flash"
msgstr "Intel \"Snelle flash\""

#: libfdisk/src/gpt.c:165
msgid "BIOS boot"
msgstr "BIOS-opstart"

#: libfdisk/src/gpt.c:168
msgid "Sony boot partition"
msgstr "Sony-opstartpartitie"

#: libfdisk/src/gpt.c:169
msgid "Lenovo boot partition"
msgstr "Lenovo-opstartpartitie"

#: libfdisk/src/gpt.c:172
msgid "PowerPC PReP boot"
msgstr "PowerPC PReP opstart"

#: libfdisk/src/gpt.c:175
msgid "ONIE boot"
msgstr "ONIE-opstart"

#: libfdisk/src/gpt.c:176
msgid "ONIE config"
msgstr "ONIE-config"

#: libfdisk/src/gpt.c:179
msgid "Microsoft reserved"
msgstr "Microsoft gereserveerd"

#: libfdisk/src/gpt.c:180
msgid "Microsoft basic data"
msgstr "Microsoft basisgegevens"

#: libfdisk/src/gpt.c:181
msgid "Microsoft LDM metadata"
msgstr "Microsoft LDM-metagegevens"

#: libfdisk/src/gpt.c:182
msgid "Microsoft LDM data"
msgstr "Microsoft LDM-gegevens"

#: libfdisk/src/gpt.c:183
msgid "Windows recovery environment"
msgstr "Windows recovery-omgeving"

#: libfdisk/src/gpt.c:184
msgid "IBM General Parallel Fs"
msgstr "IBM General Parallel FS"

#: libfdisk/src/gpt.c:185
msgid "Microsoft Storage Spaces"
msgstr "Microsoft \"Opslagruimtes\""

#: libfdisk/src/gpt.c:188
msgid "HP-UX data"
msgstr "HP-UX gegevens"

#: libfdisk/src/gpt.c:189
msgid "HP-UX service"
msgstr "HP-UX service"

#: libfdisk/src/gpt.c:192 libfdisk/src/sgi.c:60 libfdisk/src/sun.c:51
msgid "Linux swap"
msgstr "Linux wisselgeheugen"

#: libfdisk/src/gpt.c:193
msgid "Linux filesystem"
msgstr "Linux bestandssysteem"

#: libfdisk/src/gpt.c:194
msgid "Linux server data"
msgstr "Linux servergegevens"

#: libfdisk/src/gpt.c:195
msgid "Linux root (x86)"
msgstr "Linux root (x86)"

#: libfdisk/src/gpt.c:196
msgid "Linux root (ARM)"
msgstr "Linux root (ARM)"

#: libfdisk/src/gpt.c:197
msgid "Linux root (x86-64)"
msgstr "Linux root (x86-64)"

#: libfdisk/src/gpt.c:198
msgid "Linux root (ARM-64)"
msgstr "Linux root (ARM-64)"

# FIXME: no tab
#: libfdisk/src/gpt.c:199
msgid "Linux root\t(IA-64)"
msgstr "Linux root (IA-64)"

#: libfdisk/src/gpt.c:200
msgid "Linux reserved"
msgstr "Linux gereserveerd"

#: libfdisk/src/gpt.c:201
msgid "Linux home"
msgstr "Linux home"

#: libfdisk/src/gpt.c:202 libfdisk/src/sgi.c:63
msgid "Linux RAID"
msgstr "Linux RAID"

#: libfdisk/src/gpt.c:203
msgid "Linux extended boot"
msgstr "Linux uitgebreid opstart"

#: libfdisk/src/gpt.c:211
msgid "FreeBSD data"
msgstr "FreeBSD gegevens"

#: libfdisk/src/gpt.c:212
msgid "FreeBSD boot"
msgstr "FreeBSD opstart"

#: libfdisk/src/gpt.c:213
msgid "FreeBSD swap"
msgstr "FreeBSD wisselgeheugen"

#: libfdisk/src/gpt.c:214
msgid "FreeBSD UFS"
msgstr "FreeBSD UFS"

#: libfdisk/src/gpt.c:215
msgid "FreeBSD ZFS"
msgstr "FreeBSD ZFS"

#: libfdisk/src/gpt.c:216
msgid "FreeBSD Vinum"
msgstr "FreeBSD Vinum"

#: libfdisk/src/gpt.c:219
msgid "Apple HFS/HFS+"
msgstr "Apple HFS/HFS+"

#: libfdisk/src/gpt.c:220
msgid "Apple UFS"
msgstr "Apple UFS"

#: libfdisk/src/gpt.c:221
msgid "Apple RAID"
msgstr "Apple RAID"

#: libfdisk/src/gpt.c:222
msgid "Apple RAID offline"
msgstr "Apple RAID offline"

#: libfdisk/src/gpt.c:223
msgid "Apple boot"
msgstr "Apple opstart"

#: libfdisk/src/gpt.c:224
msgid "Apple label"
msgstr "Apple label"

#: libfdisk/src/gpt.c:225
msgid "Apple TV recovery"
msgstr "Apple TV recovery"

#: libfdisk/src/gpt.c:226
msgid "Apple Core storage"
msgstr "Apple Core opslag"

#: libfdisk/src/gpt.c:230
msgid "Solaris root"
msgstr "Solaris root"

#: libfdisk/src/gpt.c:232
msgid "Solaris /usr & Apple ZFS"
msgstr "Solaris /usr & Apple ZFS"

#: libfdisk/src/gpt.c:233
msgid "Solaris swap"
msgstr "Solaris wisselgeheugen"

#: libfdisk/src/gpt.c:234
msgid "Solaris backup"
msgstr "Solaris backup"

#: libfdisk/src/gpt.c:235
msgid "Solaris /var"
msgstr "Solaris /var"

#: libfdisk/src/gpt.c:236
msgid "Solaris /home"
msgstr "Solaris /home"

#: libfdisk/src/gpt.c:237
msgid "Solaris alternate sector"
msgstr "Solaris alternatieve sector"

#: libfdisk/src/gpt.c:238
msgid "Solaris reserved 1"
msgstr "Solaris gereserveerd 1"

#: libfdisk/src/gpt.c:239
msgid "Solaris reserved 2"
msgstr "Solaris gereserveerd 2"

#: libfdisk/src/gpt.c:240
msgid "Solaris reserved 3"
msgstr "Solaris gereserveerd 3"

#: libfdisk/src/gpt.c:241
msgid "Solaris reserved 4"
msgstr "Solaris gereserveerd 4"

#: libfdisk/src/gpt.c:242
msgid "Solaris reserved 5"
msgstr "Solaris gereserveerd 5"

#: libfdisk/src/gpt.c:245
msgid "NetBSD swap"
msgstr "NetBSD wisselgeheugen"

#: libfdisk/src/gpt.c:246
msgid "NetBSD FFS"
msgstr "NetBSD FFS"

#: libfdisk/src/gpt.c:247
msgid "NetBSD LFS"
msgstr "NetBSD LFS"

#: libfdisk/src/gpt.c:248
msgid "NetBSD concatenated"
msgstr "NetBSD samengevoegd"

#: libfdisk/src/gpt.c:249
msgid "NetBSD encrypted"
msgstr "NetBSD versleuteld"

#: libfdisk/src/gpt.c:250
msgid "NetBSD RAID"
msgstr "NetBSD RAID"

#: libfdisk/src/gpt.c:253
msgid "ChromeOS kernel"
msgstr "ChromeOS kernel"

#: libfdisk/src/gpt.c:254
msgid "ChromeOS root fs"
msgstr "ChromeOS root-FS"

#: libfdisk/src/gpt.c:255
msgid "ChromeOS reserved"
msgstr "ChromeOS gereserveerd"

#: libfdisk/src/gpt.c:258
msgid "MidnightBSD data"
msgstr "MidnightBSD gegevens"

#: libfdisk/src/gpt.c:259
msgid "MidnightBSD boot"
msgstr "MidnightBSD opstart"

#: libfdisk/src/gpt.c:260
msgid "MidnightBSD swap"
msgstr "MindightBSD wisselgeheugen"

#: libfdisk/src/gpt.c:261
msgid "MidnightBSD UFS"
msgstr "MidnightBSD UFS"

#: libfdisk/src/gpt.c:262
msgid "MidnightBSD ZFS"
msgstr "MidnightBSD ZFS"

#: libfdisk/src/gpt.c:263
msgid "MidnightBSD Vinum"
msgstr "MidnightBSD Vinum"

#: libfdisk/src/gpt.c:266
msgid "Ceph Journal"
msgstr "Ceph journal"

#: libfdisk/src/gpt.c:267
msgid "Ceph Encrypted Journal"
msgstr "Ceph versleuteld journal"

#: libfdisk/src/gpt.c:268
msgid "Ceph OSD"
msgstr "Ceph OSD"

#: libfdisk/src/gpt.c:269
msgid "Ceph crypt OSD"
msgstr "Ceph versleuteld OSD"

#: libfdisk/src/gpt.c:270
msgid "Ceph disk in creation"
msgstr "Ceph schijf in wording"

#: libfdisk/src/gpt.c:271
msgid "Ceph crypt disk in creation"
msgstr "Ceph versleutelde schijf in wording"

#: libfdisk/src/gpt.c:274
msgid "OpenBSD data"
msgstr "OpenBSD gegevens"

#: libfdisk/src/gpt.c:277
msgid "QNX6 file system"
msgstr "QNX6 bestandssysteem"

#: libfdisk/src/gpt.c:280
msgid "Plan 9 partition"
msgstr "Plan-9 partitie"

#: libfdisk/src/gpt.c:589
msgid "failed to allocate GPT header"
msgstr "reserveren van geheugen voor GPT-kop is mislukt"

#: libfdisk/src/gpt.c:672
msgid "First LBA specified by script is out of range."
msgstr "Eerste door script gegeven LBA valt buiten geldig bereik."

#: libfdisk/src/gpt.c:684
msgid "Last LBA specified by script is out of range."
msgstr "Laatste door script gegeven LBA valt buiten geldig bereik."

#: libfdisk/src/gpt.c:817
#, c-format
msgid "GPT PMBR size mismatch (%<PRIu64> != %<PRIu64>) will be corrected by w(rite)."
msgstr "Grootteverschil in GPT PMBR (%<PRIu64> != %<PRIu64>) zal worden gerepareerd door schrijven."

#: libfdisk/src/gpt.c:834
msgid "gpt: stat() failed"
msgstr "gpt: stat() is mislukt"

#: libfdisk/src/gpt.c:844
#, c-format
msgid "gpt: cannot handle files with mode %o"
msgstr "gpt: kan bestanden met modus %o niet verwerken"

#: libfdisk/src/gpt.c:1108
msgid "GPT Header"
msgstr "GPT-kop"

#: libfdisk/src/gpt.c:1113
msgid "GPT Entries"
msgstr "GPT-items"

#: libfdisk/src/gpt.c:1145
msgid "First LBA"
msgstr "Eerste LBA"

#: libfdisk/src/gpt.c:1150
msgid "Last LBA"
msgstr "Laatste LBA"

#. TRANSLATORS: The LBA (Logical Block Address) of the backup GPT header.
#: libfdisk/src/gpt.c:1156
msgid "Alternative LBA"
msgstr "Alternatieve LBA"

#. TRANSLATORS: The start of the array of partition entries.
#: libfdisk/src/gpt.c:1162
msgid "Partition entries LBA"
msgstr "LBA van partitie-items"

#: libfdisk/src/gpt.c:1167
msgid "Allocated partition entries"
msgstr "Gereserveerde partitie-items"

#: libfdisk/src/gpt.c:1512
msgid "The backup GPT table is corrupt, but the primary appears OK, so that will be used."
msgstr "De reservekopie van de GPT-tabel is beschadigd, maar de primaire tabel lijkt goed.  Deze laatste zal worden gebruikt."

#: libfdisk/src/gpt.c:1521
msgid "The primary GPT table is corrupt, but the backup appears OK, so that will be used."
msgstr "De primaire GPT-tabel is beschadigd, maar de reservekopie lijkt goed.  Deze laatste zal worden gebruikt."

#: libfdisk/src/gpt.c:1703
#, c-format
msgid "unsupported GPT attribute bit '%s'"
msgstr "niet-ondersteund GPT-eigenschapsbit '%s'"

#: libfdisk/src/gpt.c:1708
#, fuzzy, c-format
msgid "failed to parse GPT attribute string '%s'"
msgstr "ontleden van lijst '%s' is mislukt"

#: libfdisk/src/gpt.c:1803
#, c-format
msgid "Partition UUID changed from %s to %s."
msgstr "Partitie-UUID is gewijzigd van %s naar %s."

#: libfdisk/src/gpt.c:1811
#, c-format
msgid "Partition name changed from '%s' to '%.*s'."
msgstr "Partitienaam is gewijzigd van '%s' naar '%.*s'."

#: libfdisk/src/gpt.c:1840
msgid "The start of the partition understeps FirstUsableLBA."
msgstr "Begin van de partitie is kleiner dan FirstUsableLBA."

#: libfdisk/src/gpt.c:1847
msgid "The end of the partition oversteps LastUsableLBA."
msgstr "Begin van de partitie is groter dan LastUsableLBA."

#: libfdisk/src/gpt.c:2010
msgid "The device contains hybrid MBR -- writing GPT only. You have to sync the MBR manually."
msgstr ""
"Het apparaat bevat een hybride MBR -- alleen de GPT wordt geschreven.\n"
"U dient de MBR handmatig te synchroniseren (expertopdracht 'M')."

#: libfdisk/src/gpt.c:2047
msgid "Disk does not contain a valid backup header."
msgstr "Schijf bevat geen geldige backup-header."

#: libfdisk/src/gpt.c:2052
msgid "Invalid primary header CRC checksum."
msgstr "Ongeldige CRC-controlesom van primaire header."

#: libfdisk/src/gpt.c:2056
msgid "Invalid backup header CRC checksum."
msgstr "Ongeldige CRC-controlesom van backup-header."

#: libfdisk/src/gpt.c:2061
msgid "Invalid partition entry checksum."
msgstr "Ongeldige controlesom van partitie-item."

#: libfdisk/src/gpt.c:2066
msgid "Invalid primary header LBA sanity checks."
msgstr "Ongeldige LBA-gezondverstandcontrole van primaire header."

#: libfdisk/src/gpt.c:2070
msgid "Invalid backup header LBA sanity checks."
msgstr "Ongeldige LBA-gezondverstandcontrole van backup-header."

#: libfdisk/src/gpt.c:2075
msgid "MyLBA mismatch with real position at primary header."
msgstr "MyLBA komt niet overeen met werkelijke positie in primaire header."

#: libfdisk/src/gpt.c:2079
msgid "MyLBA mismatch with real position at backup header."
msgstr "MyLBA komt niet overeen met werkelijke positie in backup-header."

#: libfdisk/src/gpt.c:2084
msgid "Disk is too small to hold all data."
msgstr "Schijf is te klein om alle gegevens te bevatten."

#: libfdisk/src/gpt.c:2094
msgid "Primary and backup header mismatch."
msgstr "Primaire en backup-header komen niet overeen."

#: libfdisk/src/gpt.c:2100
#, c-format
msgid "Partition %u overlaps with partition %u."
msgstr "Partitie %u overlapt partitie %u."

#: libfdisk/src/gpt.c:2107
#, c-format
msgid "Partition %u is too big for the disk."
msgstr "Partitie %u is te groot voor de schijf."

#: libfdisk/src/gpt.c:2114
#, c-format
msgid "Partition %u ends before it starts."
msgstr "Partitie %u eindigt vóórdat ie begint."

#: libfdisk/src/gpt.c:2123
msgid "No errors detected."
msgstr "Geen fouten gevonden."

#: libfdisk/src/gpt.c:2124
#, c-format
msgid "Header version: %s"
msgstr "Header-versie: %s"

#: libfdisk/src/gpt.c:2125
#, fuzzy, c-format
msgid "Using %zu out of %zu partitions."
msgstr "Er worden %u van %d partities gebruikt."

#: libfdisk/src/gpt.c:2135
#, c-format
msgid "A total of %ju free sectors is available in %u segment."
msgid_plural "A total of %ju free sectors is available in %u segments (the largest is %s)."
msgstr[0] "Een totaal van %ju vrije sectoren is beschikbaar in %u segment."
msgstr[1] "Een totaal van %ju vrije sectoren is beschikbaar in %u segmenten (de grootste is %s)."

#: libfdisk/src/gpt.c:2143
#, c-format
msgid "%d error detected."
msgid_plural "%d errors detected."
msgstr[0] "%d fout gevonden."
msgstr[1] "%d fouten gevonden."

#: libfdisk/src/gpt.c:2222
msgid "All partitions are already in use."
msgstr "Alle partities zijn al in gebruik."

#: libfdisk/src/gpt.c:2279 libfdisk/src/gpt.c:2304
#, c-format
msgid "Sector %ju already used."
msgstr "Sector %ju wordt al gebruikt."

#: libfdisk/src/gpt.c:2365
#, c-format
msgid "Could not create partition %zu"
msgstr "Kan partitie %zu niet aanmaken"

#: libfdisk/src/gpt.c:2372
#, c-format
msgid "The last usable GPT sector is %ju, but %ju is requested."
msgstr "De laatste bruikbare GPT-sector is %ju, maar %ju werd gevraagd."

#: libfdisk/src/gpt.c:2379
#, c-format
msgid "The first usable GPT sector is %ju, but %ju is requested."
msgstr "De eerste bruikbare GPT-sector is %ju, maar %ju werd gevraagd."

#: libfdisk/src/gpt.c:2513
#, c-format
msgid "Created a new GPT disklabel (GUID: %s)."
msgstr "Een nieuw GPT-schijflabel is aangemaakt (GUID: %s)."

#: libfdisk/src/gpt.c:2531
msgid "Enter new disk UUID (in 8-4-4-4-12 format)"
msgstr "Voer nieuwe schijf-UUID in (in 8-4-4-4-12-vorm)"

#: libfdisk/src/gpt.c:2538
msgid "Failed to parse your UUID."
msgstr "Ontleden van UUID is mislukt."

#: libfdisk/src/gpt.c:2552
#, c-format
msgid "Disk identifier changed from %s to %s."
msgstr "Schijf-ID is gewijzigd van %s naar %s."

#: libfdisk/src/gpt.c:2572
msgid "Not enough space for new partition table!"
msgstr "Niet genoeg ruimte beschikbaar voor een nieuwe partitietabel!"

#: libfdisk/src/gpt.c:2583
#, fuzzy, c-format
msgid "Partition #%zu out of range (minimal start is %<PRIu64> sectors)"
msgstr "Partitie %u gaat buiten boord (het minimum begin is %<PRIu64> sectoren)"

#: libfdisk/src/gpt.c:2588
#, fuzzy, c-format
msgid "Partition #%zu out of range (maximal end is %<PRIu64> sectors)"
msgstr "Partitie %u gaat buiten boord (het maximum einde is %<PRIu64> sectoren)"

#: libfdisk/src/gpt.c:2631
#, fuzzy, c-format
msgid "The number of the partition has be smaller than %zu."
msgstr "Het maximum aantal partities is aangemaakt."

#: libfdisk/src/gpt.c:2654
msgid "Cannot allocate memory!"
msgstr "Onvoldoende geheugen beschikbaar!"

#: libfdisk/src/gpt.c:2684
#, c-format
msgid "Partition table length changed from %<PRIu32> to %<PRIu64>."
msgstr "Partitietabellengte is gewijzigd van %<PRIu32> naar %<PRIu64>."

#: libfdisk/src/gpt.c:2793
#, c-format
msgid "The attributes on partition %zu changed to 0x%016<PRIx64>."
msgstr "De eigenschappen van partitie %zu zijn gewijzigd naar 0x%016<PRIx64>."

#: libfdisk/src/gpt.c:2843
msgid "Enter GUID specific bit"
msgstr "Voer GUID-specifiek bit in"

#: libfdisk/src/gpt.c:2858
#, c-format
msgid "failed to toggle unsupported bit %lu"
msgstr "omschakelen van niet-ondersteund bit %lu is mislukt"

#: libfdisk/src/gpt.c:2871
#, c-format
msgid "The GUID specific bit %d on partition %zu is enabled now."
msgstr "GUID-specifiek bit %d op partitie %zu is nu ingeschakeld."

#: libfdisk/src/gpt.c:2872
#, c-format
msgid "The GUID specific bit %d on partition %zu is disabled now."
msgstr "GUID-specifiek bit %d op partitie %zu is nu uitgeschakeld."

#: libfdisk/src/gpt.c:2876
#, c-format
msgid "The %s flag on partition %zu is enabled now."
msgstr "De %s-vlag op partitie %zu is nu ingeschakeld."

#: libfdisk/src/gpt.c:2877
#, c-format
msgid "The %s flag on partition %zu is disabled now."
msgstr "De %s-vlag op partitie %zu is nu uitgeschakeld."

#: libfdisk/src/gpt.c:3019
msgid "Type-UUID"
msgstr "Type-UUID"

#: libfdisk/src/gpt.c:3020
msgid "UUID"
msgstr "UUID"

#: libfdisk/src/gpt.c:3021 login-utils/chfn.c:155 login-utils/chfn.c:157
#: login-utils/chfn.c:321
msgid "Name"
msgstr "Naam"

#: libfdisk/src/partition.c:841
msgid "Free space"
msgstr "[vrije ruimte]"

#: libfdisk/src/partition.c:1210
#, c-format
msgid "Failed to resize partition #%zu."
msgstr "Van grootte veranderen van partitie #%zu is mislukt."

#: libfdisk/src/parttype.c:258 misc-utils/findmnt.c:655 schedutils/chrt.c:206
#: schedutils/ionice.c:79 sys-utils/hwclock.c:256
msgid "unknown"
msgstr "onbekend"

#: libfdisk/src/sgi.c:46
msgid "SGI volhdr"
msgstr "SGI volhdr"

#: libfdisk/src/sgi.c:47
msgid "SGI trkrepl"
msgstr "SGI trkrepl"

#: libfdisk/src/sgi.c:48
msgid "SGI secrepl"
msgstr "SGI secrepl"

#: libfdisk/src/sgi.c:49
msgid "SGI raw"
msgstr "SGI rauw"

#: libfdisk/src/sgi.c:50
msgid "SGI bsd"
msgstr "SGI bsd"

#: libfdisk/src/sgi.c:51
msgid "SGI sysv"
msgstr "SGI sysv"

#: libfdisk/src/sgi.c:52
msgid "SGI volume"
msgstr "SGI volumen"

#: libfdisk/src/sgi.c:53
msgid "SGI efs"
msgstr "SGI efs"

#: libfdisk/src/sgi.c:54
msgid "SGI lvol"
msgstr "SGI lvol"

#: libfdisk/src/sgi.c:55
msgid "SGI rlvol"
msgstr "SGI rlvol"

#: libfdisk/src/sgi.c:56
msgid "SGI xfs"
msgstr "SGI xfs"

#: libfdisk/src/sgi.c:57
msgid "SGI xfslog"
msgstr "SGI xfslog"

#: libfdisk/src/sgi.c:58
msgid "SGI xlv"
msgstr "SGI xlv"

#: libfdisk/src/sgi.c:59
msgid "SGI xvm"
msgstr "SGI xvm"

#: libfdisk/src/sgi.c:61 libfdisk/src/sun.c:52
msgid "Linux native"
msgstr "Linux native"

#: libfdisk/src/sgi.c:158
msgid "SGI info created on second sector."
msgstr "SGI-info is aangemaakt op tweede sector."

#: libfdisk/src/sgi.c:258
msgid "Detected an SGI disklabel with wrong checksum."
msgstr "SGI-schijflabel gevonden met foutieve controlesom."

#: libfdisk/src/sgi.c:281 libfdisk/src/sun.c:773
msgid "Physical cylinders"
msgstr "Fysieke cilinders"

#: libfdisk/src/sgi.c:286 libfdisk/src/sun.c:778
msgid "Extra sects/cyl"
msgstr "Extra sectoren per cilinder"

#: libfdisk/src/sgi.c:296
msgid "Bootfile"
msgstr "Opstartbestand"

#: libfdisk/src/sgi.c:394
msgid "Invalid bootfile!  The bootfile must be an absolute non-zero pathname, e.g. \"/unix\" or \"/unix.save\"."
msgstr ""
"Ongeldig opstartbestand!  Het opstartbestand moet een absolute,\n"
"niet-nul padnaam zijn, zoals '/unix' of '/unix.save'."

#: libfdisk/src/sgi.c:400
#, c-format
msgid "Name of bootfile is too long: %zu byte maximum."
msgid_plural "Name of bootfile is too long: %zu bytes maximum."
msgstr[0] "Naam van opstartbestand is te lang: maximaal %zu byte."
msgstr[1] "Naam van opstartbestand is te lang: maximaal %zu bytes."

#: libfdisk/src/sgi.c:407
msgid "Bootfile must have a fully qualified pathname."
msgstr "Opstartbestand moet een volledig aangegeven padnaam hebben."

#: libfdisk/src/sgi.c:413
msgid "Be aware that the bootfile is not checked for existence.  SGI's default is \"/unix\", and for backup \"/unix.save\"."
msgstr ""
"Let op: er niet wordt gecontroleerd of het opstartbestand bestaat.\n"
"SGI's standaard is '/unix', en voor backup '/unix.save'."

#: libfdisk/src/sgi.c:438
#, c-format
msgid "The current boot file is: %s"
msgstr "Het huidige opstartbestand is: %s"

#: libfdisk/src/sgi.c:440
msgid "Enter of the new boot file"
msgstr "Geef de naam van het nieuwe opstartbestand"

#: libfdisk/src/sgi.c:445
msgid "Boot file is unchanged."
msgstr "Opstartbestand blijft ongewijzigd."

#: libfdisk/src/sgi.c:456
#, c-format
msgid "Bootfile has been changed to \"%s\"."
msgstr "Opstartbestand is veranderd naar '%s'."

#: libfdisk/src/sgi.c:595
msgid "More than one entire disk entry present."
msgstr "Er is meer dan één gehele-schijf-item."

#: libfdisk/src/sgi.c:602 libfdisk/src/sun.c:461
msgid "No partitions defined."
msgstr "Geen partities gedefinieerd."

#: libfdisk/src/sgi.c:612
msgid "IRIX likes it when partition 11 covers the entire disk."
msgstr "IRIX houdt ervan dat partitie 11 de gehele schijf beslaat."

#: libfdisk/src/sgi.c:616
#, c-format
msgid "The entire disk partition should start at block 0, not at block %d."
msgstr "De gehele-schijfpartitie moet beginnen bij blok 0, niet bij blok %d."

#: libfdisk/src/sgi.c:627
msgid "Partition 11 should cover the entire disk."
msgstr "Partitie 11 zou de gehele schijf moeten beslaan."

#: libfdisk/src/sgi.c:651
#, c-format
msgid "Partitions %d and %d overlap by %d sector."
msgid_plural "Partitions %d and %d overlap by %d sectors."
msgstr[0] "De partities %d en %d overlappen elkaar met %d sector."
msgstr[1] "De partities %d en %d overlappen elkaar met %d sectoren."

#: libfdisk/src/sgi.c:662 libfdisk/src/sgi.c:684
#, c-format
msgid "Unused gap of %8u sector: sector %8u"
msgid_plural "Unused gap of %8u sectors: sectors %8u-%u"
msgstr[0] "Ongebruikt gat van %8u sector: sectoren %8u."
msgstr[1] "Ongebruikt gat van %8u sectoren: sectoren %8u-%u."

#: libfdisk/src/sgi.c:697
msgid "The boot partition does not exist."
msgstr "De opstartpartitie bestaat niet."

#: libfdisk/src/sgi.c:701
msgid "The swap partition does not exist."
msgstr "De wisselgeheugenpartitie bestaat niet."

#: libfdisk/src/sgi.c:705
msgid "The swap partition has no swap type."
msgstr "De wisselgeheugenpartitie heeft geen soortaanduiding."

#: libfdisk/src/sgi.c:708
msgid "You have chosen an unusual bootfile name."
msgstr "U hebt een ongebruikelijke naam gekozen voor het opstartbestand."

#: libfdisk/src/sgi.c:758
msgid "Partition overlap on the disk."
msgstr "U hebt een partitie-overlap op de schijf."

#: libfdisk/src/sgi.c:843
msgid "Attempting to generate entire disk entry automatically."
msgstr "Poging tot het automatisch aanmaken van een gehele-schijf-item."

#: libfdisk/src/sgi.c:848
msgid "The entire disk is already covered with partitions."
msgstr "De volledige schijf is al ingedeeld in partities."

#: libfdisk/src/sgi.c:852
msgid "You got a partition overlap on the disk. Fix it first!"
msgstr "U hebt een partitie-overlap op de schijf.  Los dit eerst op!"

#: libfdisk/src/sgi.c:874 libfdisk/src/sun.c:547
#, c-format
msgid "First %s"
msgstr "Eerste %s"

#: libfdisk/src/sgi.c:898 libfdisk/src/sgi.c:948
msgid "It is highly recommended that the eleventh partition covers the entire disk and is of type 'SGI volume'."
msgstr ""
"Het wordt sterk aangeraden om de elfde partitie de gehele schijf\n"
"te laten beslaan en van het type 'SGI volumen' te laten zijn."

#: libfdisk/src/sgi.c:913 libfdisk/src/sun.c:642
#, c-format
msgid "Last %s or +%s or +size{K,M,G,T,P}"
msgstr "Laatste %s, +%s of +grootte{K,M,G,T,P}"

#: libfdisk/src/sgi.c:984 libfdisk/src/sun.c:244
#, c-format
msgid "BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu. This value may be truncated for devices > 33.8 GB."
msgstr ""
"ioctl(BLKGETSIZE) is mislukt op %s.\n"
"Cilindergeometriewaarde %llu wordt nu gebruikt.\n"
"Deze waarde kan voor apparaten groter dan 33.8 GB afgekapt zijn."

#: libfdisk/src/sgi.c:1050
msgid "Created a new SGI disklabel."
msgstr "Een nieuw SGI-schijflabel is aangemaakt."

#: libfdisk/src/sgi.c:1069
msgid "Sorry, only for non-empty partitions you can change the tag."
msgstr "Sorry, alleen van niet-lege partities kunt u het type wijzigen."

#: libfdisk/src/sgi.c:1075
msgid "Consider leaving partition 9 as volume header (0), and partition 11 as entire volume (6), as IRIX expects it."
msgstr ""
"Overweeg om partitie 9 als volumenkop (0) te laten, en\n"
"partitie 11 als geheel volumen (6), zoals IRIX het verwacht."

#: libfdisk/src/sgi.c:1084
msgid "It is highly recommended that the partition at offset 0 is of type \"SGI volhdr\", the IRIX system will rely on it to retrieve from its directory standalone tools like sash and fx. Only the \"SGI volume\" entire disk section may violate this. Are you sure about tagging this partition differently?"
msgstr ""
"Het wordt sterk aangeraden om de partitie op plaats 0 van het type\n"
"'SGI volhdr' te laten zijn.  IRIX vertrouwt hierop bij het opzoeken\n"
"van programma's zoals 'sash' en 'fx'.  Alleen het gehele-schijfdeel\n"
"'SGI volumen' mag deze regel overtreden.\n"
"Weet u zeker dat u het type van deze partitie wilt wijzigen?"

#: libfdisk/src/sun.c:39
msgid "Unassigned"
msgstr "(niet-toegewezen)"

#: libfdisk/src/sun.c:41
msgid "SunOS root"
msgstr "SunOS root"

#: libfdisk/src/sun.c:42
msgid "SunOS swap"
msgstr "SunOS wisselgeheugen"

#: libfdisk/src/sun.c:43
msgid "SunOS usr"
msgstr "SunOS usr"

#: libfdisk/src/sun.c:44
msgid "Whole disk"
msgstr "gehele schijf"

#: libfdisk/src/sun.c:45
msgid "SunOS stand"
msgstr "SunOS stand"

#: libfdisk/src/sun.c:46
msgid "SunOS var"
msgstr "SunOS var"

#: libfdisk/src/sun.c:47
msgid "SunOS home"
msgstr "SunOS home"

#: libfdisk/src/sun.c:48
msgid "SunOS alt sectors"
msgstr "SunOS alt-sectoren"

#: libfdisk/src/sun.c:49
msgid "SunOS cachefs"
msgstr "SunOS cachefs"

#: libfdisk/src/sun.c:50
msgid "SunOS reserved"
msgstr "SunOS gereserveerd"

#: libfdisk/src/sun.c:136
msgid "Detected sun disklabel with wrong checksum. Probably you'll have to set all the values, e.g. heads, sectors, cylinders and partitions or force a fresh label (s command in main menu)"
msgstr ""
"Sun-schijflabel gevonden met onjuiste controlesom.\n"
"Waarschijnlijk zult u alle waarden in moeten stellen,\n"
"zoals koppen, sectoren, cilinders en partities, of een\n"
"vers label moeten maken (opdracht 's' in hoofdmenu)."

#: libfdisk/src/sun.c:153
#, c-format
msgid "Detected sun disklabel with wrong version [%d]."
msgstr "Sun-schijflabel gevonden met foutief versienummer [%d]."

#: libfdisk/src/sun.c:158
#, c-format
msgid "Detected sun disklabel with wrong vtoc.sanity [0x%08x]."
msgstr "Sun-schijflabel gevonden met foutief VTOC-controlenummer [0x%08x]."

#: libfdisk/src/sun.c:163
#, c-format
msgid "Detected sun disklabel with wrong vtoc.nparts [%u]."
msgstr "Sun-schijflabel gevonden met foutief VTOC-partitie-aantal [%u]."

#: libfdisk/src/sun.c:168
msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)"
msgstr ""
"Waarschuwing: onjuiste waardes dienen verbeterd te worden en\n"
"zullen gecorrigeerd worden bij het wegschrijven ('w')."

#: libfdisk/src/sun.c:195
msgid "Heads"
msgstr "Koppen"

#: libfdisk/src/sun.c:197
msgid "Sectors/track"
msgstr "Sectoren/spoor"

#: libfdisk/src/sun.c:300
msgid "Created a new Sun disklabel."
msgstr "Een nieuw Sun-schijflabel is aangemaakt."

#: libfdisk/src/sun.c:419
#, c-format
msgid "Partition %u doesn't end on cylinder boundary."
msgstr "Partitie %u eindigt niet op een cilindergrens."

#: libfdisk/src/sun.c:438
#, c-format
msgid "Partition %u overlaps with others in sectors %u-%u."
msgstr "Partitie %u overlapt met andere in sectoren %u-%u."

#: libfdisk/src/sun.c:466
#, c-format
msgid "Unused gap - sectors 0-%u."
msgstr "Ongebruikt gat: sectoren 0-%u."

#: libfdisk/src/sun.c:468 libfdisk/src/sun.c:474
#, c-format
msgid "Unused gap - sectors %u-%u."
msgstr "Ongebruikt gat: sectoren %u-%u."

#: libfdisk/src/sun.c:531
msgid "Other partitions already cover the whole disk. Delete some/shrink them before retry."
msgstr ""
"Andere partities beslaan al de gehele schijf.\n"
"Verwijder/verklein ze alvorens het opnieuw te proberen."

#: libfdisk/src/sun.c:596
#, c-format
msgid "Sector %d is already allocated"
msgstr "Sector %d is al gereserveerd"

#: libfdisk/src/sun.c:603
msgid "It is highly recommended that the third partition covers the whole disk and is of type `Whole disk'"
msgstr ""
"Het wordt sterk aangeraden om de derde partitie de gehele schijf\n"
"te laten beslaan en van het type 'gehele schijf' te laten zijn."

#: libfdisk/src/sun.c:613
#, c-format
msgid "Aligning the first sector from %u to %u to be on cylinder boundary."
msgstr "Eerste sector wordt uitgelijnd van %u naar %u om op cilindergrens te komen."

#: libfdisk/src/sun.c:688
#, c-format
msgid ""
"You haven't covered the whole disk with the 3rd partition, but your value\n"
"%lu %s covers some other partition. Your entry has been changed\n"
"to %lu %s"
msgstr ""
"U hebt met de derde partitie niet de gehele schijf ingenomen,\n"
"maar uw waarde %lu %s overlapt een andere partitie.\n"
"Uw invoer is gewijzigd naar %lu %s."

#: libfdisk/src/sun.c:729
#, c-format
msgid "If you want to maintain SunOS/Solaris compatibility, consider leaving this partition as Whole disk (5), starting at 0, with %u sectors"
msgstr ""
"Als u SunOS/Solaris-compatibiliteit wilt behouden, kunt u deze partitie beter\n"
"als gehele schijf (5) laten, beginnend bij 0, met %u sectoren."

#: libfdisk/src/sun.c:753
msgid "Label ID"
msgstr "Label-ID"

#: libfdisk/src/sun.c:758
msgid "Volume ID"
msgstr "Volumen-ID"

#: libfdisk/src/sun.c:768
msgid "Alternate cylinders"
msgstr "Alternatieve cilinders"

#: libfdisk/src/sun.c:874
msgid "Number of alternate cylinders"
msgstr "Aantal alternatieve cilinders"

#: libfdisk/src/sun.c:899
msgid "Extra sectors per cylinder"
msgstr "Extra sectoren per cilinder"

#: libfdisk/src/sun.c:923
msgid "Interleave factor"
msgstr "Tussenruimtefactor"

#: libfdisk/src/sun.c:947
msgid "Rotation speed (rpm)"
msgstr "Rotatiesnelheid (rpm)"

#: libfdisk/src/sun.c:971
msgid "Number of physical cylinders"
msgstr "Aantal fysieke cilinders"

#: libfdisk/src/sun.c:1040
msgid ""
"Consider leaving partition 3 as Whole disk (5),\n"
"as SunOS/Solaris expects it and even Linux likes it.\n"
msgstr ""
"Overweeg om partitie 3 als Gehele Schijf (5) te laten, zoals\n"
"SunOS/Solaris het verwacht en ook Linux het het liefst heeft.\n"

#: libfdisk/src/sun.c:1051
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
"there may destroy your partition table and bootblock.\n"
"Are you sure you want to tag the partition as Linux swap?"
msgstr ""
"Het wordt sterk aangeraden om de partitie op plaats 0 van het soort UFS-\n"
"of EXT2FS-bestandssysteem of SunOS-wisselgeheugen te laten zijn.  Op deze\n"
"plaats Linux-wisselgeheugen neerzetten vernielt mogelijk uw partitietabel\n"
"en opstartblok.  Weet u zeker dat u deze partitie als Linux-wisselgeheugen\n"
"wilt labelen?"

#: libmount/src/context.c:2359
#, fuzzy, c-format
msgid "operation failed: %m"
msgstr "openen van %s is mislukt"

#: libmount/src/context_mount.c:1305
#, c-format
msgid "WARNING: failed to apply propagation flags"
msgstr "WAARSCHUWING: toepassen van doorgavevlaggen is mislukt"

#: libmount/src/context_mount.c:1315
#, fuzzy, c-format
msgid "WARNING: device write-protected, mounted read-only"
msgstr "%s is schrijfbeveiligd en wordt als alleen-lezen aangekoppeld"

#: libmount/src/context_mount.c:1329
#, c-format
msgid "operation permitted for root only"
msgstr ""

#: libmount/src/context_mount.c:1333
#, c-format
msgid "%s is already mounted"
msgstr "%s is al aangekoppeld"

#: libmount/src/context_mount.c:1339
#, fuzzy, c-format
msgid "can't find in %s"
msgstr "kan %s niet vinden in %s"

#: libmount/src/context_mount.c:1342
#, fuzzy, c-format
msgid "can't find mount point in %s"
msgstr "kan aankoppelingspunt %s niet vinden in %s"

#: libmount/src/context_mount.c:1345
#, c-format
msgid "can't find mount source %s in %s"
msgstr "kan aankoppelingsbron %s niet vinden in %s"

#: libmount/src/context_mount.c:1350
#, c-format
msgid "more filesystems detected on %s; use -t <type> or wipefs(8)"
msgstr ""

#: libmount/src/context_mount.c:1355
#, fuzzy, c-format
msgid "failed to determine filesystem type"
msgstr "%s: bepalen van bron is mislukt"

#: libmount/src/context_mount.c:1356
#, fuzzy, c-format
msgid "no filesystem type specified"
msgstr "geen bestandsnaam gegeven"

#: libmount/src/context_mount.c:1363
#, c-format
msgid "can't find %s"
msgstr "kan %s niet vinden"

#: libmount/src/context_mount.c:1365
#, fuzzy, c-format
msgid "no mount source specified"
msgstr "geen aankoppelingspunt opgegeven"

#: libmount/src/context_mount.c:1371
#, fuzzy, c-format
msgid "failed to parse mount options: %m"
msgstr "ontleden van aankoppelingsopties is mislukt"

#: libmount/src/context_mount.c:1372
#, c-format
msgid "failed to parse mount options"
msgstr "ontleden van aankoppelingsopties is mislukt"

#: libmount/src/context_mount.c:1376
#, fuzzy, c-format
msgid "failed to setup loop device for %s"
msgstr "%s: instellen van lus-apparaat is mislukt"

#: libmount/src/context_mount.c:1380
#, fuzzy, c-format
msgid "overlapping loop device exists for %s"
msgstr "%s: er is een overlappend lus-apparaat"

#: libmount/src/context_mount.c:1383
#, fuzzy, c-format
msgid "mount failed: %m"
msgstr "aankoppelen is mislukt"

#: libmount/src/context_mount.c:1393
#, fuzzy, c-format
msgid "filesystem was mounted, but any subsequent operation failed: %m"
msgstr "%s: bestandssysteem is afgekoppeld, maar mount(8) is mislukt"

#: libmount/src/context_mount.c:1411 libmount/src/context_mount.c:1468
#, fuzzy, c-format
msgid "mount point is not a directory"
msgstr "aankoppelingspunt %s is geen map"

#: libmount/src/context_mount.c:1413 login-utils/newgrp.c:227
#, c-format
msgid "permission denied"
msgstr "toegang geweigerd"

#: libmount/src/context_mount.c:1415
#, c-format
msgid "must be superuser to use mount"
msgstr "u moet root zijn om aan te kunnen koppelen"

#: libmount/src/context_mount.c:1425
#, fuzzy, c-format
msgid "mount point is busy"
msgstr "mount: %s is bezig"

#: libmount/src/context_mount.c:1438
#, fuzzy, c-format
msgid "%s already mounted on %s"
msgstr "mount: %s is al aangekoppeld op %s\n"

#: libmount/src/context_mount.c:1444
#, fuzzy, c-format
msgid "%s already mounted or mount point busy"
msgstr "%s is al aangekoppeld of %s is bezig"

#: libmount/src/context_mount.c:1450
#, fuzzy, c-format
msgid "mount point does not exist"
msgstr "aankoppelingspunt %s bestaat niet"

#: libmount/src/context_mount.c:1453
#, fuzzy, c-format
msgid "mount point is a symbolic link to nowhere"
msgstr "aankoppelingspunt %s is een symbolische koppeling die nergens naar wijst"

#: libmount/src/context_mount.c:1458
#, c-format
msgid "special device %s does not exist"
msgstr "apparaat %s bestaat niet"

#: libmount/src/context_mount.c:1461 libmount/src/context_mount.c:1477
#: libmount/src/context_mount.c:1561 libmount/src/context_mount.c:1575
#, fuzzy, c-format
msgid "mount(2) system call failed: %m"
msgstr "mount(2) is mislukt"

#: libmount/src/context_mount.c:1473
#, c-format
msgid "special device %s does not exist (a path prefix is not a directory)"
msgstr "apparaat %s bestaat niet  (het pad bevat iets dat geen map is)"

#: libmount/src/context_mount.c:1485
#, fuzzy, c-format
msgid "mount point not mounted or bad option"
msgstr "mount: %s is nog niet aangekoppeld, of een ongeldige optie"

#: libmount/src/context_mount.c:1487
#, fuzzy, c-format
msgid "not mount point or bad option"
msgstr "%s is geen aankoppelingspunt of een ongeldige optie"

#: libmount/src/context_mount.c:1490
#, fuzzy, c-format
msgid "bad option; moving a mount residing under a shared mount is unsupported"
msgstr ""
"ongeldige optie -- het verplaatsen van een aankoppeling\n"
"onder een gedeelde aankoppeling wordt niet ondersteund"

#: libmount/src/context_mount.c:1494
#, fuzzy, c-format
msgid "bad option; for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program"
msgstr ""
"       (voor sommige bestandssystemen (bijvoorbeeld nfs of cifs) kan\n"
"       een /sbin/mount.<type> hulpprogramma nodig zijn)"

#: libmount/src/context_mount.c:1498
#, fuzzy, c-format
msgid "wrong fs type, bad option, bad superblock on %s, missing codepage or helper program, or other error"
msgstr ""
"onjuiste bestandssysteemsoort, ongeldige optie, ontbrekende codepagina,\n"
"       ontbrekend hulpprogramma, slecht superblok op %s, of een andere fout"

#: libmount/src/context_mount.c:1505
#, c-format
msgid "mount table full"
msgstr "aankoppelingstabel is vol"

#: libmount/src/context_mount.c:1510
#, fuzzy, c-format
msgid "can't read superblock on %s"
msgstr "%s: kan superblok niet lezen"

#: libmount/src/context_mount.c:1517
#, c-format
msgid "unknown filesystem type '%s'"
msgstr "onbekende bestandssysteemsoort '%s'"

#: libmount/src/context_mount.c:1520
#, c-format
msgid "unknown filesystem type"
msgstr "onbekende bestandssysteemsoort"

#: libmount/src/context_mount.c:1529
#, c-format
msgid "%s is not a block device, and stat(2) fails?"
msgstr "%s is geen blok-apparaat, en stat(2) is mislukt... heel vreemd"

# FIXME: backtick
#: libmount/src/context_mount.c:1532
#, fuzzy, c-format
msgid "the kernel does not recognize %s as a block device; maybe \"modprobe driver\" is necessary"
msgstr ""
"de kernel herkent %s niet als een blok-apparaat\n"
"       (misschien is 'modprobe stuurprogramma' nodig?)"

# FIXME: backtick
#: libmount/src/context_mount.c:1535
#, fuzzy, c-format
msgid "%s is not a block device; try \"-o loop\""
msgstr "%s is geen blok-apparaat  (misschien '-o loop' proberen?)"

#: libmount/src/context_mount.c:1537
#, fuzzy, c-format
msgid "%s is not a block device"
msgstr " %s is geen blok-apparaat"

#: libmount/src/context_mount.c:1544
#, c-format
msgid "%s is not a valid block device"
msgstr "%s is geen geldig blok-apparaat"

#: libmount/src/context_mount.c:1552
#, c-format
msgid "cannot mount %s read-only"
msgstr "kan %s niet aankoppelen voor alleen-lezen"

# FIXME: backtick
#: libmount/src/context_mount.c:1554
#, fuzzy, c-format
msgid "%s is write-protected but explicit read-write mode requested"
msgstr "%s is schrijfbeveiligd, maar expliciete optie '-w' is gegeven"

#: libmount/src/context_mount.c:1556
#, c-format
msgid "cannot remount %s read-write, is write-protected"
msgstr "kan %s niet heraankoppelen als lezen-en-schrijven, want is schrijfbeveiligd"

#: libmount/src/context_mount.c:1558
#, fuzzy, c-format
msgid "bind %s failed"
msgstr "'%s' is mislukt"

#: libmount/src/context_mount.c:1569
#, c-format
msgid "no medium found on %s"
msgstr "geen medium gevonden op %s"

#: libmount/src/context_umount.c:1051 libmount/src/context_umount.c:1080
#, fuzzy, c-format
msgid "not mounted"
msgstr "%s is niet aangekoppeld"

#: libmount/src/context_umount.c:1055
#, fuzzy, c-format
msgid "umount failed: %m"
msgstr "aankoppelen is mislukt"

#: libmount/src/context_umount.c:1064
#, fuzzy, c-format
msgid "filesystem was unmounted, but any subsequent operation failed: %m"
msgstr "%s: bestandssysteem is afgekoppeld, maar mount(8) is mislukt"

#: libmount/src/context_umount.c:1077
#, fuzzy, c-format
msgid "invalid block device"
msgstr "%s: ongeldig blok-apparaat"

#: libmount/src/context_umount.c:1083
#, fuzzy, c-format
msgid "can't write superblock"
msgstr "%s: kan niet naar superblok schrijven"

#: libmount/src/context_umount.c:1086
#, fuzzy, c-format
msgid "target is busy"
msgstr "doel bestaat"

#: libmount/src/context_umount.c:1089
#, fuzzy, c-format
msgid "no mount point specified"
msgstr "geen aankoppelingspunt opgegeven"

#: libmount/src/context_umount.c:1092
#, fuzzy, c-format
msgid "must be superuser to unmount"
msgstr "%s: u moet root zijn om te kunnen afkoppelen"

#: libmount/src/context_umount.c:1095
#, fuzzy, c-format
msgid "block devices are not permitted on filesystem"
msgstr "%s: blok-apparaten zijn niet toegestaan op bestandssysteem"

#: libmount/src/context_umount.c:1098
#, fuzzy, c-format
msgid "umount(2) system call failed: %m"
msgstr "mount(2) is mislukt"

#: lib/pager.c:112
#, c-format
msgid "waitpid failed (%s)"
msgstr "waitpid() is mislukt (%s)"

#: lib/path.c:209 sys-utils/lscpu.c:1911
msgid "failed to callocate cpu set"
msgstr "reserveren van geheugen voor processorenset is mislukt"

#: lib/path.c:213
#, c-format
msgid "failed to parse CPU list %s"
msgstr "ontleden van processorenlijst %s is mislukt"

#: lib/path.c:216
#, c-format
msgid "failed to parse CPU mask %s"
msgstr "ontleden van processorenmasker %s is mislukt"

#: lib/plymouth-ctrl.c:72
#, fuzzy
msgid "cannot open UNIX socket"
msgstr "kan socket niet openen"

#: lib/plymouth-ctrl.c:78
#, fuzzy
msgid "cannot set option for UNIX socket"
msgstr "kan optie voor socket niet instellen"

#: lib/plymouth-ctrl.c:91
#, fuzzy
msgid "cannot connect on UNIX socket"
msgstr "kan geen verbinding maken met socket"

#: lib/plymouth-ctrl.c:131
#, c-format
msgid "the plymouth request %c is not implemented"
msgstr "Plymouth-verzoek %c is niet geïmplementeerd"

#: lib/randutils.c:159
#, fuzzy
msgid "getrandom() function"
msgstr "pseudo-willekeurige functies van libc"

#: lib/randutils.c:172
msgid "libc pseudo-random functions"
msgstr "pseudo-willekeurige functies van libc"

#: lib/swapprober.c:17 lib/swapprober.c:30
#, c-format
msgid "%s: unable to probe device"
msgstr "%s: kan apparaat niet sonderen"

#: lib/swapprober.c:32
#, c-format
msgid "%s: ambiguous probing result; use wipefs(8)"
msgstr "%s: onduidelijk sonderingsresultaat; gebruik wipefs(8)"

#: lib/swapprober.c:34
#, c-format
msgid "%s: not a valid swap partition"
msgstr "%s: geen geldige wisselgeheugenpartitie"

#: lib/swapprober.c:41
#, c-format
msgid "%s: unsupported swap version '%s'"
msgstr "%s: niet-ondersteunde wisselgeheugenversie '%s'"

#: login-utils/chfn.c:95 login-utils/chsh.c:74
#, c-format
msgid " %s [options] [<username>]\n"
msgstr "   %s [opties] [<gebruikersnaam>]\n"

#: login-utils/chfn.c:98
msgid "Change your finger information.\n"
msgstr "Wijzigt uw finger-informatie.\n"

#: login-utils/chfn.c:101
msgid " -f, --full-name <full-name>  real name\n"
msgstr "  -f, --full-name <naam>       volledige, echte naam\n"

#: login-utils/chfn.c:102
msgid " -o, --office <office>        office number\n"
msgstr "  -o, --office <kantoor>       kantoor- of kamernummer\n"

#: login-utils/chfn.c:103
msgid " -p, --office-phone <phone>   office phone number\n"
msgstr "  -p, --office-phone <nummer>  telefoonnummer op het werk\n"

#: login-utils/chfn.c:104
msgid " -h, --home-phone <phone>     home phone number\n"
msgstr "  -h, --home-phone <nummer>    telefoonnummer thuis\n"

#: login-utils/chfn.c:106 login-utils/chsh.c:83
msgid " -u, --help     display this help and exit\n"
msgstr "  -u, --help                   deze hulptekst tonen en stoppen\n"

#: login-utils/chfn.c:122
#, c-format
msgid "field %s is too long"
msgstr "veld %s is te lang"

#: login-utils/chfn.c:126 login-utils/chsh.c:215
#, c-format
msgid "%s: has illegal characters"
msgstr "%s: bevat ongeldige tekens"

#: login-utils/chfn.c:155 login-utils/chfn.c:161 login-utils/chfn.c:167
#: login-utils/chfn.c:173
#, c-format
msgid "login.defs forbids setting %s"
msgstr "login.defs verbiedt het instellen van %s"

#: login-utils/chfn.c:161 login-utils/chfn.c:163 login-utils/chfn.c:323
msgid "Office"
msgstr "Kantoor"

#: login-utils/chfn.c:167 login-utils/chfn.c:169 login-utils/chfn.c:325
msgid "Office Phone"
msgstr "Kantoortelefoon"

#: login-utils/chfn.c:173 login-utils/chfn.c:175 login-utils/chfn.c:327
msgid "Home Phone"
msgstr "Thuistelefoon"

#: login-utils/chfn.c:245
msgid "Aborted."
msgstr "Afgebroken."

#: login-utils/chfn.c:308
#, c-format
msgid "%s: CHFN_RESTRICT has unexpected value: %s"
msgstr "%s: CHFN_RESTRICT heeft onverwachte waarde: %s"

#: login-utils/chfn.c:310
#, c-format
msgid "%s: CHFN_RESTRICT does not allow any changes"
msgstr "%s: CHFN_RESTRICT staat geen veranderingen toe"

#: login-utils/chfn.c:393
#, c-format
msgid "Finger information *NOT* changed.  Try again later.\n"
msgstr "Finger-informatie is NIET gewijzigd.  Probeer het later opnieuw.\n"

#: login-utils/chfn.c:397
#, c-format
msgid "Finger information changed.\n"
msgstr "Finger-informatie is gewijzigd.\n"

#: login-utils/chfn.c:422 login-utils/chsh.c:252
#, c-format
msgid "you (user %d) don't exist."
msgstr "U bestaat niet, gebruiker %d."

#: login-utils/chfn.c:428 login-utils/chsh.c:257 login-utils/libuser.c:59
#, c-format
msgid "user \"%s\" does not exist."
msgstr "Gebruiker '%s' bestaat niet."

#: login-utils/chfn.c:434 login-utils/chsh.c:263
msgid "can only change local entries"
msgstr "kan alleen lokale items wijzigen"

#: login-utils/chfn.c:447
#, c-format
msgid "%s is not authorized to change the finger info of %s"
msgstr "%s is niet gerechtigd om de finger-informatie van %s te wijzigen"

#: login-utils/chfn.c:449 login-utils/chsh.c:279
msgid "Unknown user context"
msgstr "Onbekende gebruikerscontext"

#: login-utils/chfn.c:455 login-utils/chsh.c:285
#, c-format
msgid "can't set default context for %s"
msgstr "kan de standaardcontext voor %s niet instellen"

#: login-utils/chfn.c:466
msgid "running UID doesn't match UID of user we're altering, change denied"
msgstr ""
"uitvoerende UID komt niet overeen met de UID van de gebruiker\n"
"wiens gegevens worden gewijzigd -- wijziging is geweigerd"

#: login-utils/chfn.c:470
#, c-format
msgid "Changing finger information for %s.\n"
msgstr "Wijzigen van finger-informatie voor %s.\n"

#: login-utils/chfn.c:484
#, c-format
msgid "Finger information not changed.\n"
msgstr "Finger-informatie is niet gewijzigd.\n"

#: login-utils/chsh.c:77
msgid "Change your login shell.\n"
msgstr "Wijzigt uw login-shell.\n"

#: login-utils/chsh.c:80
msgid " -s, --shell <shell>  specify login shell\n"
msgstr "  -s, --shell=<shell>    te gebruiken login-shell\n"

#: login-utils/chsh.c:81
msgid " -l, --list-shells    print list of shells and exit\n"
msgstr "  -l, --list-shells      een lijst van shells tonen en stoppen\n"

#: login-utils/chsh.c:105
msgid "No known shells."
msgstr "Geen bekende shells."

#: login-utils/chsh.c:209
msgid "shell must be a full path name"
msgstr "shell moet een volledige padnaam zijn"

#: login-utils/chsh.c:211
#, c-format
msgid "\"%s\" does not exist"
msgstr "'%s' bestaat niet"

#: login-utils/chsh.c:213
#, c-format
msgid "\"%s\" is not executable"
msgstr "'%s' is niet uitvoerbaar"

#: login-utils/chsh.c:219
#, c-format
msgid "Warning: \"%s\" is not listed in %s."
msgstr "Waarschuwing: '%s' staat niet in %s."

#: login-utils/chsh.c:223 login-utils/chsh.c:227
#, c-format
msgid ""
"\"%s\" is not listed in %s.\n"
"Use %s -l to see list."
msgstr ""
"'%s' staat niet in %s --\n"
"gebruik '%s -l' om de lijst te zien"

#: login-utils/chsh.c:278
#, c-format
msgid "%s is not authorized to change the shell of %s"
msgstr "%s is niet gerechtigd om de shell van %s te wijzigen"

#: login-utils/chsh.c:304
msgid "running UID doesn't match UID of user we're altering, shell change denied"
msgstr ""
"uitvoerende UID komt niet overeen met de UID van de gebruiker\n"
"wiens gegevens worden gewijzigd -- shell-wijziging is geweigerd"

#: login-utils/chsh.c:309
#, c-format
msgid "your shell is not in %s, shell change denied"
msgstr "uw shell staat niet in %s -- shell-wijziging is geweigerd"

#: login-utils/chsh.c:313
#, c-format
msgid "Changing shell for %s.\n"
msgstr "Wijzigen van standaard-shell voor %s.\n"

#: login-utils/chsh.c:321
msgid "New shell"
msgstr "Nieuwe shell"

#: login-utils/chsh.c:329
msgid "Shell not changed."
msgstr "Shell is niet gewijzigd."

#: login-utils/chsh.c:334
msgid "Shell *NOT* changed.  Try again later."
msgstr "Shell is NIET gewijzigd.  Probeer het later opnieuw."

# FIXME: split in two  XXX
#: login-utils/chsh.c:338
msgid ""
"setpwnam failed\n"
"Shell *NOT* changed.  Try again later."
msgstr ""
"Functie setpwnam() is mislukt.\n"
"Shell is NIET gewijzigd.  Probeer het later opnieuw."

#: login-utils/chsh.c:342
#, c-format
msgid "Shell changed.\n"
msgstr "Shell is gewijzigd.\n"

#: login-utils/islocal.c:96
#, c-format
msgid "Usage: %s <passwordfile> <username>...\n"
msgstr "Gebruik:  %s <wachtwoordbestand> <gebruikersnaam>...\n"

#: login-utils/last.c:169 login-utils/lslogins.c:1219 sys-utils/dmesg.c:1193
#: sys-utils/lsipc.c:269
#, c-format
msgid "unknown time format: %s"
msgstr "onbekende tijdopmaak: %s"

#: login-utils/last.c:276 login-utils/last.c:284
#, c-format
msgid "Interrupted %s"
msgstr "Onderbroken %s"

#: login-utils/last.c:435 login-utils/last.c:446 login-utils/last.c:888
msgid "preallocation size exceeded"
msgstr "de gereserveerde grootte is overschreden"

#: login-utils/last.c:567
#, c-format
msgid " %s [options] [<username>...] [<tty>...]\n"
msgstr "  %s [opties] [<gebruikersnaam>...] [<terminalnaam>...]\n"

#: login-utils/last.c:570
msgid "Show a listing of last logged in users.\n"
msgstr "Toont een overzicht van de laatst-aangemelde gebruikers.\n"

#: login-utils/last.c:573
msgid " -<number>            how many lines to show\n"
msgstr "  -<getal>              het aantal te tonen regels\n"

#: login-utils/last.c:574
msgid " -a, --hostlast       display hostnames in the last column\n"
msgstr "  -a, --hostlast        hostnamen tonen in de laatste kolom\n"

#: login-utils/last.c:575
msgid " -d, --dns            translate the IP number back into a hostname\n"
msgstr "  -d, --dns             IP-nummer terugvertalen naar een hostnaam\n"

#: login-utils/last.c:577
#, c-format
msgid " -f, --file <file>    use a specific file instead of %s\n"
msgstr "  -f, --file <bestand>  te gebruiken bestand in plaats van %s\n"

#: login-utils/last.c:578
msgid " -F, --fulltimes      print full login and logout times and dates\n"
msgstr "  -F, --fulltimes       volledige aan- en afmeldingstijden en -data tonen\n"

#: login-utils/last.c:579
msgid " -i, --ip             display IP numbers in numbers-and-dots notation\n"
msgstr "  -i, --ip              IP-nummers in getallen-en-puntennotatie tonen\n"

#: login-utils/last.c:580
msgid " -n, --limit <number> how many lines to show\n"
msgstr "  -n, --limit <getal>   het aantal te tonen regels\n"

#: login-utils/last.c:581
msgid " -R, --nohostname     don't display the hostname field\n"
msgstr "  -R, --nohostname      het hostnaamveld niet tonen\n"

#: login-utils/last.c:582
msgid " -s, --since <time>   display the lines since the specified time\n"
msgstr "  -s, --since <tijd>    de items vanaf deze <tijd> tonen\n"

#: login-utils/last.c:583
msgid " -t, --until <time>   display the lines until the specified time\n"
msgstr "  -t, --until <tijd>    de items tot deze <tijd> tonen\n"

#: login-utils/last.c:584
msgid " -p, --present <time> display who were present at the specified time\n"
msgstr "  -p, --present <tijd>  tonen wie op gegeven <tijd> ingelogd waren\n"

#: login-utils/last.c:585
msgid " -w, --fullnames      display full user and domain names\n"
msgstr "  -w, --fullnames       volledige gebruikersnamen en hostnamen tonen\n"

#: login-utils/last.c:586
msgid " -x, --system         display system shutdown entries and run level changes\n"
msgstr "  -x, --system          runlevel-wijzigingen en uitschakelingen tonen\n"

#: login-utils/last.c:587
msgid ""
"     --time-format <format>  show timestamps in the specified <format>:\n"
"                               notime|short|full|iso\n"
msgstr ""
"      --time-format <opmaak>  tijdsstempels tonen in gegeven opmaak:\n"
"                               'notime', 'short', 'full', of 'iso'\n"

#: login-utils/last.c:889
#, fuzzy, c-format
msgid ""
"\n"
"%s begins %s\n"
msgstr ""
"\n"
"%s begint %s"

#: login-utils/last.c:968 term-utils/scriptreplay.c:64
#: term-utils/scriptreplay.c:68
msgid "failed to parse number"
msgstr "ontleden van getal is mislukt"

#: login-utils/last.c:989 login-utils/last.c:994 login-utils/last.c:999
#: sys-utils/rtcwake.c:485
#, c-format
msgid "invalid time value \"%s\""
msgstr "ongeldige tijdswaarde '%s'"

#: login-utils/libuser.c:29 login-utils/libuser.c:31
msgid "Couldn't drop group privileges"
msgstr "Kan groepsprivileges niet laten vallen"

#: login-utils/libuser.c:47
#, c-format
msgid "libuser initialization failed: %s."
msgstr "initialisatie van 'libuser' is mislukt: %s."

#: login-utils/libuser.c:52
msgid "changing user attribute failed"
msgstr "verandering van gebruikerseigenschap is mislukt"

#: login-utils/libuser.c:66
#, c-format
msgid "user attribute not changed: %s"
msgstr "gebruikerseigenschap is niet gewijzigd: %s"

#. TRANSLATORS: The standard value for %u is 60.
#: login-utils/login.c:183
#, c-format
msgid "timed out after %u seconds"
msgstr "afgebroken na %u seconden"

#: login-utils/login.c:289
#, c-format
msgid "FATAL: can't reopen tty: %m"
msgstr "FATAAL: kan tty niet heropenen: %m"

#: login-utils/login.c:295
#, c-format
msgid "FATAL: %s is not a terminal"
msgstr "FATAAL: %s is geen terminal"

#: login-utils/login.c:313
#, c-format
msgid "chown (%s, %lu, %lu) failed: %m"
msgstr "'chown' (%s, %lu, %lu) is mislukt: %m"

#: login-utils/login.c:317
#, c-format
msgid "chmod (%s, %u) failed: %m"
msgstr "'chmod' (%s, %u) is mislukt: %m"

#: login-utils/login.c:378
msgid "FATAL: bad tty"
msgstr "FATAAL: slechte tty"

#: login-utils/login.c:396
#, c-format
msgid "FATAL: %s: change permissions failed: %m"
msgstr "FATAAL: %s: wijzigen van toegangsrechten is mislukt: %m"

#: login-utils/login.c:522
#, c-format
msgid "Last login: %.*s "
msgstr "Laatste keer ingelogd: %.*s "

#: login-utils/login.c:524
#, c-format
msgid "from %.*s\n"
msgstr "vanaf %.*s\n"

#: login-utils/login.c:527
#, c-format
msgid "on %.*s\n"
msgstr "op %.*s\n"

#: login-utils/login.c:545
msgid "write lastlog failed"
msgstr "schrijven van 'lastlog' is mislukt"

#: login-utils/login.c:636
#, c-format
msgid "DIALUP AT %s BY %s"
msgstr "INBELLEN OP %s DOOR %s"

#: login-utils/login.c:641
#, c-format
msgid "ROOT LOGIN ON %s FROM %s"
msgstr "ROOT-LOGIN OP %s VANAF %s"

#: login-utils/login.c:644
#, c-format
msgid "ROOT LOGIN ON %s"
msgstr "ROOT-LOGIN OP %s"

#: login-utils/login.c:647
#, c-format
msgid "LOGIN ON %s BY %s FROM %s"
msgstr "LOGIN OP %s DOOR %s VANAF %s"

#: login-utils/login.c:650
#, c-format
msgid "LOGIN ON %s BY %s"
msgstr "LOGIN OP %s DOOR %s"

#: login-utils/login.c:703
msgid "login: "
msgstr "inlognaam: "

#: login-utils/login.c:729
#, c-format
msgid "PAM failure, aborting: %s"
msgstr "PAM-fout -- gestopt: %s"

#: login-utils/login.c:730
#, c-format
msgid "Couldn't initialize PAM: %s"
msgstr "Kan PAM niet initialiseren: %s"

#: login-utils/login.c:801
#, c-format
msgid "FAILED LOGIN %u FROM %s FOR %s, %s"
msgstr "INLOGPOGING %u IS MISLUKT VANAF %s VOOR %s -- %s"

#: login-utils/login.c:809 login-utils/sulogin.c:1015
#, c-format
msgid ""
"Login incorrect\n"
"\n"
msgstr ""
"Inloggegevens onjuist\n"
"\n"

#: login-utils/login.c:824
#, c-format
msgid "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"
msgstr "TE VEEL INLOGPOGINGEN (%u) VANAF %s VOOR %s -- %s"

#: login-utils/login.c:830
#, c-format
msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
msgstr "INLOGSESSIE IS MISLUKT VANAF %s VOOR %s -- %s"

#: login-utils/login.c:838
#, c-format
msgid ""
"\n"
"Login incorrect\n"
msgstr ""
"\n"
"Inloggegevens onjuist\n"

#: login-utils/login.c:866 login-utils/login.c:1216 login-utils/login.c:1239
msgid ""
"\n"
"Session setup problem, abort."
msgstr ""
"\n"
"Sessie-instellingsprobleem -- gestopt"

#: login-utils/login.c:867
#, c-format
msgid "NULL user name in %s:%d. Abort."
msgstr "Lege gebruikersnaam in %s:%d -- gestopt"

#: login-utils/login.c:1004
#, c-format
msgid "TIOCSCTTY failed: %m"
msgstr "ioctl(TIOCSCTTY) is mislukt: %m"

#: login-utils/login.c:1158
#, c-format
msgid "login: -h is for superuser only\n"
msgstr "login: optie '-h' kan alleen door root gebruikt worden\n"

#: login-utils/login.c:1173
#, c-format
msgid "Usage: login [-p] [-h <host>] [-H] [[-f] <username>]\n"
msgstr "Gebruik:  login [-p] [-h <hostnaam>] [-H] [[-f] <gebruikersnaam>]\n"

#: login-utils/login.c:1175
msgid "Begin a session on the system.\n"
msgstr "Begint een sessie op het systeem.\n"

#: login-utils/login.c:1217
#, c-format
msgid "Invalid user name \"%s\" in %s:%d. Abort."
msgstr "Onjuiste gebruikersnaam '%s' in %s:%d -- gestopt"

#: login-utils/login.c:1238
#, c-format
msgid "groups initialization failed: %m"
msgstr "initialisatie van groepen is mislukt: %m"

#: login-utils/login.c:1263
msgid "setgid() failed"
msgstr "setgid() is mislukt"

#: login-utils/login.c:1293
#, c-format
msgid "You have new mail.\n"
msgstr "U hebt nieuwe e-mail.\n"

#: login-utils/login.c:1295
#, c-format
msgid "You have mail.\n"
msgstr "U hebt e-mail.\n"

#: login-utils/login.c:1309
msgid "setuid() failed"
msgstr "setuid() is mislukt"

#: login-utils/login.c:1315 login-utils/sulogin.c:729
#, c-format
msgid "%s: change directory failed"
msgstr "%s: wijzigen van map is mislukt"

#: login-utils/login.c:1322 login-utils/sulogin.c:730
#, c-format
msgid "Logging in with home = \"/\".\n"
msgstr "Ingelogd met home = '/'.\n"

#: login-utils/login.c:1351
msgid "couldn't exec shell script"
msgstr "kan shell-script niet uitvoeren"

#: login-utils/login.c:1353
msgid "no shell"
msgstr "geen shell"

#: login-utils/logindefs.c:206
#, c-format
msgid "%s: %s contains invalid numerical value: %s"
msgstr "%s: %s bevat ongeldige numerieke waarde: %s"

#: login-utils/logindefs.c:376
msgid "hush login status: restore original IDs failed"
msgstr "hush login-status: herstellen van originele ID's is mislukt"

#: login-utils/lslogins.c:208 sys-utils/lscpu.c:1587 sys-utils/lscpu.c:1597
#: sys-utils/lsmem.c:200
msgid "no"
msgstr "nee"

#: login-utils/lslogins.c:217 misc-utils/lsblk.c:184
msgid "user name"
msgstr "gebruikersnaam"

#: login-utils/lslogins.c:217
msgid "Username"
msgstr "Gebruikersnaam"

#: login-utils/lslogins.c:218 sys-utils/renice.c:54
msgid "user ID"
msgstr "Gebruikers-ID"

#: login-utils/lslogins.c:219
msgid "password not required"
msgstr "wachtwoord niet vereist"

#: login-utils/lslogins.c:219
msgid "Password not required"
msgstr "Wachtwoord is niet vereist"

#: login-utils/lslogins.c:220
msgid "login by password disabled"
msgstr "inloggen met wachtwoord is uitgeschakeld"

#: login-utils/lslogins.c:220
msgid "Login by password disabled"
msgstr "Inloggen met wachtwoord is uitgeschakeld"

#: login-utils/lslogins.c:221
msgid "password defined, but locked"
msgstr "wachtwoord is gedefinieerd maar vergrendeld"

#: login-utils/lslogins.c:221
msgid "Password is locked"
msgstr "Wachtwoord is vergrendeld"

#: login-utils/lslogins.c:222
msgid "log in disabled by nologin(8) or pam_nologin(8)"
msgstr "inloggen is uitgeschakeld door nologin(8) of pam_nologin(8)"

#: login-utils/lslogins.c:222
msgid "No login"
msgstr "Inloggen is geblokkeerd"

#: login-utils/lslogins.c:223
msgid "primary group name"
msgstr "primaire groepsnaam"

#: login-utils/lslogins.c:223
msgid "Primary group"
msgstr "Primaire groep"

#: login-utils/lslogins.c:224
msgid "primary group ID"
msgstr "primaire groeps-ID"

#: login-utils/lslogins.c:225
msgid "supplementary group names"
msgstr "supplementaire groepsnamen"

#: login-utils/lslogins.c:225
msgid "Supplementary groups"
msgstr "Supplementaire groepen"

#: login-utils/lslogins.c:226
msgid "supplementary group IDs"
msgstr "supplementaire groeps-ID's"

#: login-utils/lslogins.c:226
msgid "Supplementary group IDs"
msgstr "Supplementaire groeps-ID's"

#: login-utils/lslogins.c:227
msgid "home directory"
msgstr "thuismap"

#: login-utils/lslogins.c:227
msgid "Home directory"
msgstr "Thuismap"

#: login-utils/lslogins.c:228
msgid "login shell"
msgstr "inlog-shell"

#: login-utils/lslogins.c:228
msgid "Shell"
msgstr "Shell"

#: login-utils/lslogins.c:229
msgid "full user name"
msgstr "Volledige naam"

#: login-utils/lslogins.c:229
msgid "Gecos field"
msgstr "Gecos-veld"

#: login-utils/lslogins.c:230
msgid "date of last login"
msgstr "datum van laatste aanmelding"

#: login-utils/lslogins.c:230
msgid "Last login"
msgstr "Laatste keer ingelogd"

#: login-utils/lslogins.c:231
msgid "last tty used"
msgstr "laatst-gebruikte TTY"

#: login-utils/lslogins.c:231
msgid "Last terminal"
msgstr "Laatste terminal"

#: login-utils/lslogins.c:232
msgid "hostname during the last session"
msgstr "hostnaam tijdens laatste sessie"

#: login-utils/lslogins.c:232
msgid "Last hostname"
msgstr "Laatste hostnaam"

#: login-utils/lslogins.c:233
msgid "date of last failed login"
msgstr "datum van laatste mislukte aanmelding"

#: login-utils/lslogins.c:233
msgid "Failed login"
msgstr "Mislukte aanmelding"

#: login-utils/lslogins.c:234
msgid "where did the login fail?"
msgstr "waar mislukte de aanmelding?"

#: login-utils/lslogins.c:234
msgid "Failed login terminal"
msgstr "Aanmeldterminal"

#: login-utils/lslogins.c:235
msgid "user's hush settings"
msgstr "hush-instellingen"

#: login-utils/lslogins.c:235
msgid "Hushed"
msgstr "Gehushed"

#: login-utils/lslogins.c:236
msgid "days user is warned of password expiration"
msgstr "aantal dagen dat gebruiker gewaarschuwd wordt voor verlopen van wachtwoord"

#: login-utils/lslogins.c:236
msgid "Password expiration warn interval"
msgstr "Wachtwoordverloop-waarschuwingsinterval"

#: login-utils/lslogins.c:237
msgid "password expiration date"
msgstr "datum dat wachtwoord verloopt"

#: login-utils/lslogins.c:237
msgid "Password expiration"
msgstr "Wachtwoord verloopt"

#: login-utils/lslogins.c:238
msgid "date of last password change"
msgstr "datum van laatste wachtwoordwijziging"

#: login-utils/lslogins.c:238
msgid "Password changed"
msgstr "Wachtwoord gewijzigd"

#: login-utils/lslogins.c:239
msgid "number of days required between changes"
msgstr "minimum aantal dagen tussen wijzigingen"

#: login-utils/lslogins.c:239
msgid "Minimum change time"
msgstr "Minimum wijzigingstijd"

#: login-utils/lslogins.c:240
msgid "max number of days a password may remain unchanged"
msgstr "maximum aantal dagen dat wachtwoord ongewijzigd mag blijven"

#: login-utils/lslogins.c:240
msgid "Maximum change time"
msgstr "Maximum wijzigingstijd"

#: login-utils/lslogins.c:241
msgid "the user's security context"
msgstr "beveiligingscontext van de gebruiker"

#: login-utils/lslogins.c:241
msgid "Selinux context"
msgstr "SELinux-context"

#: login-utils/lslogins.c:242
msgid "number of processes run by the user"
msgstr "aantal processen dat de gebruiker draaide"

#: login-utils/lslogins.c:242
msgid "Running processes"
msgstr "Draaiende processen"

#: login-utils/lslogins.c:288 misc-utils/findmnt.c:136 misc-utils/lsblk.c:239
#: sys-utils/lsipc.c:204 sys-utils/lsmem.c:117
#, c-format
msgid "too many columns specified, the limit is %zu columns"
msgstr "te veel kolommen opgegeven; maximum is %zu kolommen"

#: login-utils/lslogins.c:343 sys-utils/lsipc.c:457
msgid "unsupported time type"
msgstr "niet-ondersteunde tijdssoort"

#: login-utils/lslogins.c:347
msgid "failed to compose time string"
msgstr "samenstellen van tijdstekenreeks is mislukt"

#: login-utils/lslogins.c:644
msgid "failed to get supplementary groups"
msgstr "kan supplementaire groepen niet achterhalen"

#: login-utils/lslogins.c:1070
msgid "internal error: unknown column"
msgstr "**interne programmafout**: onbekende kolom"

# FIXME: clarify with translator comment
#: login-utils/lslogins.c:1168
#, c-format
msgid ""
"\n"
"Last logs:\n"
msgstr ""
"\n"
"Laatste logberichten:\n"

#: login-utils/lslogins.c:1227 login-utils/nologin.c:26
#: misc-utils/lslocks.c:494 misc-utils/mcookie.c:82 misc-utils/uuidd.c:70
#: misc-utils/uuidgen.c:25 sys-utils/dmesg.c:264 sys-utils/ipcmk.c:66
#: sys-utils/lscpu.c:2050 sys-utils/lsipc.c:277 sys-utils/lsmem.c:371
#: sys-utils/readprofile.c:104 sys-utils/rtcwake.c:95 term-utils/setterm.c:381
#: text-utils/line.c:30
#, c-format
msgid " %s [options]\n"
msgstr "  %s [opties]\n"

#: login-utils/lslogins.c:1230
msgid "Display information about known users in the system.\n"
msgstr "Toont informatie over gebruikers in het systeem.\n"

#: login-utils/lslogins.c:1233
msgid " -a, --acc-expiration     display info about passwords expiration\n"
msgstr ""

#: login-utils/lslogins.c:1234
msgid " -c, --colon-separate     display data in a format similar to /etc/passwd\n"
msgstr ""

#: login-utils/lslogins.c:1235 sys-utils/lsipc.c:296
msgid " -e, --export             display in an export-able output format\n"
msgstr ""

#: login-utils/lslogins.c:1236
msgid " -f, --failed             display data about the users' last failed logins\n"
msgstr ""

#: login-utils/lslogins.c:1237
msgid " -G, --supp-groups        display information about groups\n"
msgstr "  -G, --supp-group         informatie over groepen tonen\n"

#: login-utils/lslogins.c:1238
msgid " -g, --groups=<groups>    display users belonging to a group in <groups>\n"
msgstr ""

#: login-utils/lslogins.c:1239
msgid " -L, --last               show info about the users' last login sessions\n"
msgstr ""

#: login-utils/lslogins.c:1240
msgid " -l, --logins=<logins>    display only users from <logins>\n"
msgstr ""

#: login-utils/lslogins.c:1241 sys-utils/lsipc.c:298
msgid " -n, --newline            display each piece of information on a new line\n"
msgstr ""

#: login-utils/lslogins.c:1242 sys-utils/lsipc.c:291
msgid "     --noheadings         don't print headings\n"
msgstr "      --noheadings         geen kopregel tonen\n"

#: login-utils/lslogins.c:1243 sys-utils/lsipc.c:292
msgid "     --notruncate         don't truncate output\n"
msgstr ""

#: login-utils/lslogins.c:1244 sys-utils/lsipc.c:300
msgid " -o, --output[=<list>]    define the columns to output\n"
msgstr "  -o, --output[=<lijst>]   weer te geven uitvoerkolommen\n"

#: login-utils/lslogins.c:1245
msgid " -p, --pwd                display information related to login by password.\n"
msgstr ""

#: login-utils/lslogins.c:1246 sys-utils/lsipc.c:302
msgid " -r, --raw                display in raw mode\n"
msgstr ""

#: login-utils/lslogins.c:1247
msgid " -s, --system-accs        display system accounts\n"
msgstr ""

#: login-utils/lslogins.c:1248 sys-utils/lsipc.c:293
msgid "     --time-format=<type> display dates in short, full or iso format\n"
msgstr ""

#: login-utils/lslogins.c:1249
msgid " -u, --user-accs          display user accounts\n"
msgstr ""

#: login-utils/lslogins.c:1250
msgid " -Z, --context            display SELinux contexts\n"
msgstr ""

#: login-utils/lslogins.c:1251
msgid " -z, --print0             delimit user entries with a nul character\n"
msgstr ""

#: login-utils/lslogins.c:1252
msgid "     --wtmp-file <path>   set an alternate path for wtmp\n"
msgstr ""

#: login-utils/lslogins.c:1253
msgid "     --btmp-file <path>   set an alternate path for btmp\n"
msgstr ""

#: login-utils/lslogins.c:1258 misc-utils/findmnt.c:1251 sys-utils/lscpu.c:2069
#: sys-utils/lsmem.c:391
#, c-format
msgid ""
"\n"
"Available columns:\n"
msgstr ""
"\n"
"Beschikbare kolommen:\n"

# FIXME: request failed
#: login-utils/lslogins.c:1441
msgid "failed to request selinux state"
msgstr "opvragen van SELinux-toestand is mislukt"

#: login-utils/lslogins.c:1455 login-utils/lslogins.c:1459
msgid "Only one user may be specified. Use -l for multiple users."
msgstr "Slechts één gebruiker mag worden gegeven.  Gebruik '-l' voor meerdere gebruikers."

#: login-utils/newgrp.c:49 login-utils/newgrp.c:55
msgid "could not set terminal attributes"
msgstr "kan terminaleigenschappen niet instellen"

#: login-utils/newgrp.c:57
msgid "getline() failed"
msgstr "getline() is mislukt"

#: login-utils/newgrp.c:150
msgid "Password: "
msgstr "Wachtwoord: "

#: login-utils/newgrp.c:160 login-utils/sulogin.c:997
msgid "crypt failed"
msgstr "crypt() is mislukt"

#: login-utils/newgrp.c:172
#, c-format
msgid " %s <group>\n"
msgstr "  %s <groep>\n"

#: login-utils/newgrp.c:175
msgid "Log in to a new group.\n"
msgstr "Meldt u aan onder een andere groep.\n"

#: login-utils/newgrp.c:213
msgid "who are you?"
msgstr "wie bent u?"

#: login-utils/newgrp.c:217 login-utils/newgrp.c:229 sys-utils/nsenter.c:475
msgid "setgid failed"
msgstr "setgid() is mislukt"

#: login-utils/newgrp.c:222 login-utils/newgrp.c:224
msgid "no such group"
msgstr "die groep bestaat niet"

#: login-utils/newgrp.c:233 sys-utils/nsenter.c:477
msgid "setuid failed"
msgstr "setuid() is mislukt"

#: login-utils/nologin.c:29
msgid "Politely refuse a login.\n"
msgstr "Weigert beleefd een aanmelding.\n"

#: login-utils/nologin.c:87
#, c-format
msgid "This account is currently not available.\n"
msgstr "Dit account is momenteel niet beschikbaar.\n"

#: login-utils/su-common.c:283
#, c-format
msgid "cannot open session: %s"
msgstr "kan sessie niet openen: %s"

#: login-utils/su-common.c:295
msgid "cannot create child process"
msgstr "kan geen dochterproces starten"

#: login-utils/su-common.c:307
#, c-format
msgid "cannot change directory to %s"
msgstr "wijzigen van huidige map naar %s is mislukt"

#: login-utils/su-common.c:312
msgid "cannot block signals"
msgstr "kan signalen niet blokkeren"

#: login-utils/su-common.c:326 login-utils/su-common.c:334
#: login-utils/su-common.c:340 misc-utils/uuidd.c:407 sys-utils/lscpu.c:892
#: term-utils/script.c:779
msgid "cannot set signal handler"
msgstr "kan geen signaalverwerker instellen"

#: login-utils/su-common.c:365
msgid " (core dumped)"
msgstr " (geheugendump gemaakt)"

#: login-utils/su-common.c:384
#, c-format
msgid ""
"\n"
"Session terminated, killing shell..."
msgstr ""
"\n"
"Sessie is beëindigd, shell wordt geëlimineerd..."

#: login-utils/su-common.c:396
#, c-format
msgid " ...killed.\n"
msgstr " ...is geëlimineerd.\n"

#: login-utils/su-common.c:477
msgid "may not be used by non-root users"
msgstr "kan niet gebruikt worden door gewone gebruikers"

#: login-utils/su-common.c:505
msgid "incorrect password"
msgstr "onjuist wachtwoord"

#: login-utils/su-common.c:589
msgid "cannot set groups"
msgstr "kan de groepen niet instellen"

#: login-utils/su-common.c:604 sys-utils/eject.c:664
msgid "cannot set group id"
msgstr "kan groeps-ID niet instellen"

#: login-utils/su-common.c:606 sys-utils/eject.c:667
msgid "cannot set user id"
msgstr "kan gebruikers-ID niet instellen"

#: login-utils/su-common.c:679
#, fuzzy, c-format
msgid " %s [options] -u <user> [[--] <command>]\n"
msgstr "  %s [opties] -u <gebruiker> <opdracht>\n"

#: login-utils/su-common.c:680 login-utils/su-common.c:692
#, c-format
msgid " %s [options] [-] [<user> [<argument>...]]\n"
msgstr "  %s [opties] [-] [<gebruiker> [<argument>...]]\n"

#: login-utils/su-common.c:681
msgid ""
"\n"
"Run <command> with the effective user ID and group ID of <user>.  If -u is\n"
"not given, fall back to su(1)-compatible semantics and execute standard shell.\n"
"The options -c, -f, -l, and -s are mutually exclusive with -u.\n"
msgstr ""
"\n"
"Voert <opdracht> uit met effectieve gebruikers-ID en groeps-ID van <gebruiker>.\n"
"Zonder '-u' wordt een semantiek gebruikt die compatibel is met 'su(1)' en wordt\n"
"een standaard shell uitgevoerd.\n"
"De opties '-c', '-f', '-l' en '-s' gaan niet samen met '-u'.\n"

#: login-utils/su-common.c:688
msgid " -u, --user <user>             username\n"
msgstr "  -u, --user <gebruiker>      de ID's van deze gebruiker gebruiken\n"

#: login-utils/su-common.c:693
msgid ""
"\n"
"Change the effective user ID and group ID to that of <user>.\n"
"A mere - implies -l.  If <user> is not given, root is assumed.\n"
msgstr ""
"\n"
"Wijzigt de effectieve gebruikers-ID en groeps-ID in die van <gebruiker>.\n"
"Een enkele '-' betekent '-l'.  Zonder een <gebruiker>, wordt root begrepen.\n"

#: login-utils/su-common.c:700
msgid " -m, -p, --preserve-environment  do not reset environment variables\n"
msgstr "  -m, -p, --preserve-environment  omgevingsvariabelen niet wissen\n"

#: login-utils/su-common.c:701
msgid " -g, --group <group>             specify the primary group\n"
msgstr "  -g, --group <groep>             te gebruiken primaire groep\n"

#: login-utils/su-common.c:702
msgid ""
" -G, --supp-group <group>        specify a supplemental group\n"
"\n"
msgstr ""
"  -G, --supp-group <groep>        te gebruiken supplementaire groep\n"
"\n"

#: login-utils/su-common.c:704
msgid " -, -l, --login                  make the shell a login shell\n"
msgstr "  -, -l, --login                  van de shell een login-shell maken\n"

#: login-utils/su-common.c:705
msgid " -c, --command <command>         pass a single command to the shell with -c\n"
msgstr "  -c, --command <opdracht>        deze ene opdracht aan de shell geven via '-c'\n"

#: login-utils/su-common.c:706
msgid ""
" --session-command <command>     pass a single command to the shell with -c\n"
"                                   and do not create a new session\n"
msgstr ""
"  --session-command <opdracht>    deze ene opdracht aan de shell geven via '-c'\n"
"                                    zonder een nieuwe sessie aan te maken\n"

#: login-utils/su-common.c:708
msgid " -f, --fast                      pass -f to the shell (for csh or tcsh)\n"
msgstr "  -f, --fast                      '-f' aan de shell geven (voor 'csh' of 'tcsh')\n"

#: login-utils/su-common.c:709
msgid " -s, --shell <shell>             run <shell> if /etc/shells allows it\n"
msgstr "  -s, --shell=<shell>             te gebruiken shell als /etc/shells dit toestaat\n"

#: login-utils/su-common.c:756
#, c-format
msgid "specifying more than %d supplemental group is not possible"
msgid_plural "specifying more than %d supplemental groups is not possible"
msgstr[0] "het is niet mogelijk om meer dan %d supplementaire groep op te geven"
msgstr[1] "het is niet mogelijk om meer dan %d supplementaire groepen op te geven"

#: login-utils/su-common.c:762
#, c-format
msgid "group %s does not exist"
msgstr "groep %s bestaat niet"

#: login-utils/su-common.c:880
msgid "ignoring --preserve-environment, it's mutually exclusive with --login"
msgstr "optie '--preserve-environment' wordt genegeerd; gaat niet samen met '--login'"

#: login-utils/su-common.c:891
msgid "options --{shell,fast,command,session-command,login} and --user are mutually exclusive"
msgstr "optie '--user' gaat niet samen met '--{shell,fast,command,session-command,login}'"

#: login-utils/su-common.c:895
msgid "no command was specified"
msgstr "geen commando gegeven"

#: login-utils/su-common.c:912
msgid "only root can specify alternative groups"
msgstr "alleen root kan alternatieve groepen opgeven"

#: login-utils/su-common.c:919
#, c-format
msgid "user %s does not exist"
msgstr "gebruiker %s bestaat niet"

#: login-utils/su-common.c:959
#, c-format
msgid "using restricted shell %s"
msgstr "ingeperkte shell %s wordt gebruikt"

#: login-utils/su-common.c:983
#, c-format
msgid "warning: cannot change directory to %s"
msgstr "waarschuwing: kan map niet wijzigen in %s"

#: login-utils/sulogin.c:130
msgid "tcgetattr failed"
msgstr "tcgetattr() is mislukt"

#: login-utils/sulogin.c:207
msgid "tcsetattr failed"
msgstr "tcsetattr() is mislukt"

#: login-utils/sulogin.c:469
#, c-format
msgid "%s: no entry for root\n"
msgstr "%s: er is geen item voor root\n"

#: login-utils/sulogin.c:496
#, c-format
msgid "%s: no entry for root"
msgstr "%s: er is geen item voor root"

#: login-utils/sulogin.c:501
#, c-format
msgid "%s: root password garbled"
msgstr "%s: het rootwachtwoord is verknoeid"

#: login-utils/sulogin.c:529
#, c-format
msgid ""
"\n"
"Cannot open access to console, the root account is locked.\n"
"See sulogin(8) man page for more details.\n"
"\n"
"Press Enter to continue.\n"
msgstr ""
"\n"
"Kan geen toegang krijgen tot een console; het root-account is vergrendeld.\n"
"Zie de handleiding van sulogin(8) voor meer informatie.\n"
"\n"
"Druk op Enter om verder te gaan.\n"

#: login-utils/sulogin.c:535
#, c-format
msgid "Give root password for login: "
msgstr "Geef het rootwachtwoord om in te loggen: "

#: login-utils/sulogin.c:537
#, c-format
msgid "Press Enter for login: "
msgstr "Druk op Enter om in te loggen: "

#: login-utils/sulogin.c:540
#, c-format
msgid "Give root password for maintenance\n"
msgstr "Geef het rootwachtwoord voor onderhoud\n"

#: login-utils/sulogin.c:542
#, c-format
msgid "Press Enter for maintenance\n"
msgstr "Druk op Enter voor onderhoud\n"

#: login-utils/sulogin.c:543
#, c-format
msgid "(or press Control-D to continue): "
msgstr "(of druk op Ctrl-D om verder te gaan): "

#: login-utils/sulogin.c:733
msgid "change directory to system root failed"
msgstr "wijzigen van huidige map naar systeemhoofdmap is mislukt"

#: login-utils/sulogin.c:782
msgid "setexeccon failed"
msgstr "setexeccon() is mislukt"

#: login-utils/sulogin.c:802
#, c-format
msgid " %s [options] [tty device]\n"
msgstr "  %s [opties] [<TTY-apparaat>]\n"

#: login-utils/sulogin.c:805
msgid "Single-user login.\n"
msgstr "Eéngebruikersmodus.\n"

#: login-utils/sulogin.c:808
msgid ""
" -p, --login-shell        start a login shell\n"
" -t, --timeout <seconds>  max time to wait for a password (default: no limit)\n"
" -e, --force              examine password files directly if getpwnam(3) fails\n"
msgstr ""
"  -p, --login-shell         een login-shell starten\n"
"  -t, --timeout <seconden>  maximum tijd om te wachten op invoer van wachtwoord\n"
"                              (standaard: geen limiet)\n"
"  -e, --force               wachtwoordbestanden direct bekijken als de functie\n"
"                              getpwnam(3) faalt\n"

#: login-utils/sulogin.c:863 misc-utils/findmnt.c:1470 sys-utils/wdctl.c:525
#: term-utils/agetty.c:758 term-utils/wall.c:207
msgid "invalid timeout argument"
msgstr "ongeldige tijdslimiet"

#: login-utils/sulogin.c:885
msgid "only superuser can run this program"
msgstr "alleen root kan dit programma uitvoeren"

#: login-utils/sulogin.c:928
msgid "cannot open console"
msgstr "kan console niet openen"

#: login-utils/sulogin.c:935
msgid "cannot open password database"
msgstr "kan wachtwoordengegevensbank niet openen"

#: login-utils/sulogin.c:1012
#, fuzzy, c-format
msgid ""
"cannot execute su shell\n"
"\n"
msgstr ""
"Kan de 'su'-shell niet uitvoeren\n"
"\n"

#: login-utils/sulogin.c:1019
msgid ""
"Timed out\n"
"\n"
msgstr ""
"Duurde te lang\n"
"\n"

#: login-utils/sulogin.c:1051
#, fuzzy
msgid ""
"cannot wait on su shell\n"
"\n"
msgstr ""
"Kan niet op 'su'-shell wachten\n"
"\n"

#: login-utils/utmpdump.c:176
#, c-format
msgid "%s: cannot add inotify watch."
msgstr "%s: kan geen 'inotify'-wachter toevoegen"

#: login-utils/utmpdump.c:185
#, c-format
msgid "%s: cannot read inotify events"
msgstr "%s: kan geen 'inotify'-gebeurtenissen lezen"

#: login-utils/utmpdump.c:246 login-utils/utmpdump.c:251
msgid "Extraneous newline in file. Exiting."
msgstr "Ongepast regeleinde in bestand -- gestopt."

#: login-utils/utmpdump.c:304
#, c-format
msgid " %s [options] [filename]\n"
msgstr "  %s [opties] [<bestand>]\n"

#: login-utils/utmpdump.c:307
msgid "Dump UTMP and WTMP files in raw format.\n"
msgstr "UTMP- en WTMP-bestanden in rauwe vorm weergeven.\n"

#: login-utils/utmpdump.c:310
msgid " -f, --follow         output appended data as the file grows\n"
msgstr "  -f, --follow     toegevoegde gegevens tonen wanneer bestand groeit\n"

#: login-utils/utmpdump.c:311
msgid " -r, --reverse        write back dumped data into utmp file\n"
msgstr "  -r, --reverse    gedumpte gegevens terugschrijven naar 'utmp'-bestand\n"

#: login-utils/utmpdump.c:312
msgid " -o, --output <file>  write to file instead of standard output\n"
msgstr "  -o, --output <bestand>   naar dit bestand schrijven i.p.v. standaarduitvoer\n"

#: login-utils/utmpdump.c:379
msgid "following standard input is unsupported"
msgstr "het volgen van standaardinvoer wordt niet ondersteund"

#: login-utils/utmpdump.c:385
#, c-format
msgid "Utmp undump of %s\n"
msgstr "Utmp-ontdumping van %s\n"

#: login-utils/utmpdump.c:388
#, c-format
msgid "Utmp dump of %s\n"
msgstr "Utmp-dump van %s\n"

#: login-utils/vipw.c:142
msgid "can't open temporary file"
msgstr "kan tijdelijk bestand niet openen"

#: login-utils/vipw.c:158
#, c-format
msgid "%s: create a link to %s failed"
msgstr "%s: aanmaken van een link naar %s is mislukt"

#: login-utils/vipw.c:165
#, c-format
msgid "Can't get context for %s"
msgstr "Kan context van %s niet achterhalen"

#: login-utils/vipw.c:171
#, c-format
msgid "Can't set context for %s"
msgstr "Kan context voor %s niet instellen"

#: login-utils/vipw.c:237
#, c-format
msgid "%s unchanged"
msgstr "%s is ongewijzigd"

#: login-utils/vipw.c:255
msgid "cannot get lock"
msgstr "kan geen vergrendeling verkrijgen"

#: login-utils/vipw.c:282
msgid "no changes made"
msgstr "geen wijzigingen gemaakt"

#: login-utils/vipw.c:291
msgid "cannot chmod file"
msgstr "kan modus van bestand niet wijzigen"

#: login-utils/vipw.c:305
msgid "Edit the password or group file.\n"
msgstr "Bewerkt het 'passwd'- of 'group'-bestand.\n"

#: login-utils/vipw.c:359
msgid "You are using shadow groups on this system.\n"
msgstr "U gebruikt schaduwgroepen op dit systeem.\n"

#: login-utils/vipw.c:360
msgid "You are using shadow passwords on this system.\n"
msgstr "U gebruikt schaduwwachtwoorden op dit systeem.\n"

#. TRANSLATORS: this program uses for y and n rpmatch(3),
#. * which means they can be translated.
#: login-utils/vipw.c:364
#, c-format
msgid "Would you like to edit %s now [y/n]? "
msgstr "Wilt u %s nu bewerken [j/n]? "

# FIXME: parenthesis?
#: misc-utils/blkid.c:65
#, fuzzy, c-format
msgid "%s from %s  (libblkid %s, %s)\n"
msgstr "'%s' uit %s (libmount %s)"

#: misc-utils/blkid.c:75
#, c-format
msgid ""
" %s --label <label> | --uuid <uuid>\n"
"\n"
msgstr ""

#: misc-utils/blkid.c:76
#, c-format
msgid ""
" %s [--cache-file <file>] [-ghlLv] [--output <format>] [--match-tag <tag>] \n"
"       [--match-token <token>] [<dev> ...]\n"
"\n"
msgstr ""

#: misc-utils/blkid.c:78
#, c-format
msgid ""
" %s -p [--match-tag <tag>] [--offset <offset>] [--size <size>] \n"
"       [--output <format>] <dev> ...\n"
"\n"
msgstr ""

#: misc-utils/blkid.c:80
#, c-format
msgid " %s -i [--match-tag <tag>] [--output <format>] <dev> ...\n"
msgstr ""

#: misc-utils/blkid.c:82
#, fuzzy
msgid ""
" -c, --cache-file <file>    read from <file> instead of reading from the default\n"
"                              cache file (-c /dev/null means no cache)\n"
msgstr ""
"  -A, --adjfile=<bestand>  te gebruiken verschuivingsregistratiebestand\n"
"                             (standaard is %s)\n"

#: misc-utils/blkid.c:84
#, fuzzy
msgid " -d, --no-encoding          don't encode non-printing characters\n"
msgstr "  -n, --noheadings         geen kopregel tonen\n"

#: misc-utils/blkid.c:85
msgid " -g, --garbage-collect      garbage collect the blkid cache\n"
msgstr ""

#: misc-utils/blkid.c:86
msgid ""
" -o, --output <format>      output format; can be one of:\n"
"                              value, device, export or full; (default: full)\n"
msgstr ""

#: misc-utils/blkid.c:88
#, fuzzy
msgid " -k, --list-filesystems     list all known filesystems/RAIDs and exit\n"
msgstr "  -l, --list-shells      een lijst van shells tonen en stoppen\n"

#: misc-utils/blkid.c:89
msgid " -s, --match-tag <tag>      show specified tag(s) (default show all tags)\n"
msgstr ""

#: misc-utils/blkid.c:90
msgid " -t, --match-token <token>  find device with a specific token (NAME=value pair)\n"
msgstr ""

#: misc-utils/blkid.c:91
#, fuzzy
msgid " -l, --list-one             look up only first device with token specified by -t\n"
msgstr "  -l, --list                informatie tonen (over alle of gegeven apparaat)\n"

#: misc-utils/blkid.c:92
#, fuzzy
msgid " -L, --label <label>        convert LABEL to device name\n"
msgstr "  -s, --size <getal>       de grootte van het ZRAM-apparaat\n"

#: misc-utils/blkid.c:93
#, fuzzy
msgid " -U, --uuid <uuid>          convert UUID to device name\n"
msgstr "  -u, --user <gebruiker>      de ID's van deze gebruiker gebruiken\n"

#: misc-utils/blkid.c:94
msgid " <dev>                      specify device(s) to probe (default: all devices)\n"
msgstr ""

#: misc-utils/blkid.c:96
#, fuzzy
msgid "Low-level probing options:\n"
msgstr "Schedulingopties:\n"

#: misc-utils/blkid.c:97
#, fuzzy
msgid " -p, --probe                low-level superblocks probing (bypass cache)\n"
msgstr "  -p, --pid         PID-naamsruimte niet delen\n"

#: misc-utils/blkid.c:98
#, fuzzy
msgid " -i, --info                 gather information about I/O limits\n"
msgstr "  -i, --info                alleen info over de sonderingsstap tonen \n"

#: misc-utils/blkid.c:99
#, fuzzy
msgid " -S, --size <size>          overwrite device size\n"
msgstr "  -s, --size <getal>       de grootte van het ZRAM-apparaat\n"

#: misc-utils/blkid.c:100
#, fuzzy
msgid " -O, --offset <offset>      probe at the given offset\n"
msgstr "  -H, --host <hostnaam>     naam van host waarop in te loggen\n"

#: misc-utils/blkid.c:101
#, fuzzy
msgid " -u, --usages <list>        filter by \"usage\" (e.g. -u filesystem,raid)\n"
msgstr "  -t, --types <lijst>       de set van bestandssysteemsoorten beperken\n"

#: misc-utils/blkid.c:102
#, fuzzy
msgid " -n, --match-types <list>   filter by filesystem type (e.g. -n vfat,ext3)\n"
msgstr "  -t, --types <lijst>       de set van bestandssysteemsoorten beperken\n"

#: misc-utils/blkid.c:235
msgid "(mounted, mtpt unknown)"
msgstr ""

#: misc-utils/blkid.c:237
#, fuzzy
msgid "(in use)"
msgstr "Markeren als gebruikt"

#: misc-utils/blkid.c:239
#, fuzzy
msgid "(not mounted)"
msgstr "%s is niet aangekoppeld"

#: misc-utils/blkid.c:503
#, c-format
msgid "error: %s"
msgstr "fout: %s"

#: misc-utils/blkid.c:548
#, c-format
msgid "%s: ambivalent result (probably more filesystems on the device, use wipefs(8) to see more details)"
msgstr ""

#: misc-utils/blkid.c:594
#, fuzzy, c-format
msgid "unknown keyword in -u <list> argument: '%s'"
msgstr "onbekend argument: %s"

#: misc-utils/blkid.c:611
msgid "error: -u <list> argument is empty"
msgstr ""

#: misc-utils/blkid.c:754
#, fuzzy, c-format
msgid "unsupported output format %s"
msgstr "ongeldige optie-opmaak: %s"

#: misc-utils/blkid.c:757 misc-utils/wipefs.c:535
msgid "invalid offset argument"
msgstr "ongeldig positie-argument"

#: misc-utils/blkid.c:764
#, fuzzy
msgid "Too many tags specified"
msgstr "geen commando gegeven"

#: misc-utils/blkid.c:770
#, fuzzy
msgid "invalid size argument"
msgstr "ongeldige tijd"

#: misc-utils/blkid.c:774
msgid "Can only search for one NAME=value pair"
msgstr ""

#: misc-utils/blkid.c:781
msgid "-t needs NAME=value pair"
msgstr ""

#: misc-utils/blkid.c:831
msgid "The low-level probing mode does not support 'list' output format"
msgstr ""

#: misc-utils/blkid.c:844
msgid "The low-level probing mode requires a device"
msgstr ""

#: misc-utils/blkid.c:894
msgid "The lookup option requires a search type specified using -t"
msgstr ""

#: misc-utils/cal.c:372
msgid "invalid month argument"
msgstr "ongeldig maandargument"

#: misc-utils/cal.c:380
msgid "invalid week argument"
msgstr "ongeldig weekargument"

#: misc-utils/cal.c:382
msgid "illegal week value: use 1-54"
msgstr "onjuiste waarde voor week;  gebruik 1-54"

#: misc-utils/cal.c:421
#, c-format
msgid "failed to parse timestamp or unknown month name: %s"
msgstr "ontleden van tijdsstempel is mislukt of onbekende maandnaam: %s"

#: misc-utils/cal.c:430
msgid "illegal day value"
msgstr "ongeldige waarde voor dag"

#: misc-utils/cal.c:432 misc-utils/cal.c:455
#, c-format
msgid "illegal day value: use 1-%d"
msgstr "onjuiste waarde voor dag;  gebruik 1-%d"

#: misc-utils/cal.c:436 misc-utils/cal.c:444
msgid "illegal month value: use 1-12"
msgstr "onjuiste waarde voor maand;  gebruik 1-12"

#: misc-utils/cal.c:440
#, c-format
msgid "unknown month name: %s"
msgstr "onbekende maandnaam: %s"

#: misc-utils/cal.c:447 misc-utils/cal.c:451
msgid "illegal year value"
msgstr "ongeldige waarde voor jaar"

#: misc-utils/cal.c:449
msgid "illegal year value: use positive integer"
msgstr "onjuiste waarde voor jaar;  gebruik een positief geheel getal"

#: misc-utils/cal.c:481 misc-utils/cal.c:494
#, c-format
msgid "illegal week value: year %d doesn't have week %d"
msgstr "onjuiste waarde voor week;  jaar %d heeft geen week %d"

# FIXME: add translator comment
#: misc-utils/cal.c:678
#, c-format
msgid "%s"
msgstr "%s"

#: misc-utils/cal.c:684
#, c-format
msgid "%04d"
msgstr "%04d"

# FIXME: add translator comment
#: misc-utils/cal.c:690
#, c-format
msgid "%s %04d"
msgstr "%s %04d"

#: misc-utils/cal.c:992
#, c-format
msgid " %s [options] [[[day] month] year]\n"
msgstr "  %s [opties] [[[dag] maand] jaar]\n"

#: misc-utils/cal.c:993
#, c-format
msgid " %s [options] <timestamp|monthname>\n"
msgstr "  %s [opties] <tijdsstempel>|<maandnaam>\n"

#: misc-utils/cal.c:996
msgid "Display a calendar, or some part of it.\n"
msgstr "Toont een kalender of een deel ervan.\n"

#: misc-utils/cal.c:997
msgid "Without any arguments, display the current month.\n"
msgstr "Zonder argumenten wordt de huidige maand getoond.\n"

#: misc-utils/cal.c:1000
msgid " -1, --one             show only a single month (default)\n"
msgstr "  -1, --one             slechts één maand tonen (standaard)\n"

#: misc-utils/cal.c:1001
msgid " -3, --three           show three months spanning the date\n"
msgstr "  -3, --three           drie maanden rondom de datum tonen\n"

#: misc-utils/cal.c:1002
msgid " -n, --months <num>    show num months starting with date's month\n"
msgstr "  -n, --months <getal>  dit aantal maanden tonen vanaf de datum\n"

#: misc-utils/cal.c:1003
msgid " -S, --span            span the date when displaying multiple months\n"
msgstr "  -S, --span            de datum omvatten bij weergave van meerdere maanden\n"

#: misc-utils/cal.c:1004
msgid " -s, --sunday          Sunday as first day of week\n"
msgstr "  -s, --sunday          zondag is eerste dag van de week\n"

#: misc-utils/cal.c:1005
msgid " -m, --monday          Monday as first day of week\n"
msgstr "  -m, --monday          maandag is eerste dag van de week\n"

#: misc-utils/cal.c:1006
msgid " -j, --julian          output Julian dates\n"
msgstr "  -j, --julian          Juliaanse datums weergeven\n"

#: misc-utils/cal.c:1007
msgid " -y, --year            show the whole year\n"
msgstr "  -y, --year            een heel jaar tonen\n"

#: misc-utils/cal.c:1008
msgid " -Y, --twelve          show the next twelve months\n"
msgstr "  -Y, --twelve          de volgende twaalf maanden tonen\n"

#: misc-utils/cal.c:1009
msgid " -w, --week[=<num>]    show US or ISO-8601 week numbers\n"
msgstr "  -w, --week[=<getal>]  Amerikaanse of ISO-8601-weeknummers tonen\n"

#: misc-utils/cal.c:1010
msgid "     --color[=<when>]  colorize messages (auto, always or never)\n"
msgstr "      --color[=<wanneer>]  uitvoer kleuren ('always', 'auto', of 'never')\n"

#: misc-utils/fincore.c:61
#, fuzzy
msgid "file data residend in memory in pages"
msgstr "Gedeeldgeheugen-pagina's"

#: misc-utils/fincore.c:62
msgid "file data residend in memory in bytes"
msgstr ""

#: misc-utils/fincore.c:63
#, fuzzy
msgid "size of the file"
msgstr "apparaatgrootte"

#: misc-utils/fincore.c:64
#, fuzzy
msgid "file name"
msgstr "Bestandsnaam"

#: misc-utils/fincore.c:174
#, fuzzy, c-format
msgid "failed to do mincore: %s"
msgstr "lezen van symlink %s is mislukt"

#: misc-utils/fincore.c:213
#, fuzzy, c-format
msgid "failed to do mmap: %s"
msgstr "openen van %s is mislukt"

#: misc-utils/fincore.c:241
#, fuzzy, c-format
msgid "failed to open: %s"
msgstr "openen van %s is mislukt"

#: misc-utils/fincore.c:246
#, fuzzy, c-format
msgid "failed to do fstat: %s"
msgstr "lezen van %s is mislukt"

#: misc-utils/fincore.c:266
#, fuzzy, c-format
msgid " %s [options] file...\n"
msgstr "  %s [opties] <bestand>...\n"

#: misc-utils/fincore.c:269
#, fuzzy
msgid " -J, --json            use JSON output format\n"
msgstr "  -J, --json             uitvoer in JSON-opmaak produceren\n"

#: misc-utils/fincore.c:270
#, fuzzy
msgid " -b, --bytes           print sizes in bytes rather than in human readable format\n"
msgstr "  -b, --bytes            groottes in bytes weergeven i.p.v. in leesbare vorm\n"

#: misc-utils/fincore.c:271
#, fuzzy
msgid " -n, --noheadings      don't print headings\n"
msgstr "  -n, --noheadings       geen kopregel tonen\n"

#: misc-utils/fincore.c:272
#, fuzzy
msgid " -o, --output <list>   output columns\n"
msgstr "  -o, --output <lijst>  te tonen kolommen in de uitvoer\n"

#: misc-utils/fincore.c:273
#, fuzzy
msgid " -r, --raw             use raw output format\n"
msgstr "  -r, --raw              rauwe uitvoer produceren\n"

#: misc-utils/fincore.c:279 misc-utils/lsblk.c:1662 misc-utils/lslocks.c:512
#: sys-utils/lsns.c:632 sys-utils/prlimit.c:196 sys-utils/zramctl.c:548
#, c-format
msgid ""
"\n"
"Available columns (for --output):\n"
msgstr ""
"\n"
"Beschikbare kolommen (voor '--output') zijn:\n"

#: misc-utils/fincore.c:344 sys-utils/losetup.c:777
msgid "no file specified"
msgstr "geen bestandsnaam gegeven"

#: misc-utils/findfs.c:29
#, c-format
msgid " %s [options] {LABEL,UUID,PARTUUID,PARTLABEL}=<value>\n"
msgstr "  %s [opties] {LABEL,UUID,PARTUUID,PARTLABEL}=<waarde>\n"

#: misc-utils/findfs.c:33
msgid "Find a filesystem by label or UUID.\n"
msgstr "Zoekt een bestandssysteem aan de hand van label of UUID.\n"

#: misc-utils/findfs.c:75
#, c-format
msgid "unable to resolve '%s'"
msgstr "kan '%s' niet herleiden"

#: misc-utils/findmnt.c:99
msgid "source device"
msgstr "bronapparaat "

#: misc-utils/findmnt.c:100
msgid "mountpoint"
msgstr "aankoppelingspunt"

#: misc-utils/findmnt.c:101 misc-utils/lsblk.c:164
msgid "filesystem type"
msgstr "bestandssysteemsoort"

#: misc-utils/findmnt.c:102
msgid "all mount options"
msgstr "alle aankoppelingsopties"

#: misc-utils/findmnt.c:103
msgid "VFS specific mount options"
msgstr "VFS-specifieke aankoppelingsopties"

#: misc-utils/findmnt.c:104
msgid "FS specific mount options"
msgstr "bestandssysteemspecifieke aankoppelingsopties"

#: misc-utils/findmnt.c:105
msgid "filesystem label"
msgstr "bestandssysteemlabel"

#: misc-utils/findmnt.c:106 misc-utils/lsblk.c:167
msgid "filesystem UUID"
msgstr "bestandssysteem-UUID"

#: misc-utils/findmnt.c:107
msgid "partition label"
msgstr "partitielabel"

#: misc-utils/findmnt.c:109 misc-utils/lsblk.c:163
msgid "major:minor device number"
msgstr "hoofd-:subapparaatnummer"

#: misc-utils/findmnt.c:110
msgid "action detected by --poll"
msgstr "actie gedetecteerd door '--poll'"

#: misc-utils/findmnt.c:111
msgid "old mount options saved by --poll"
msgstr "oude aankoppelingsopties gedetecteerd door '--poll'"

#: misc-utils/findmnt.c:112
msgid "old mountpoint saved by --poll"
msgstr "oud aankoppelingspunt gedetecteerd door '--poll'"

#: misc-utils/findmnt.c:113
msgid "filesystem size"
msgstr "bestandssysteemgrootte"

#: misc-utils/findmnt.c:114
msgid "filesystem size available"
msgstr "bestandssysteemgrootte (beschikbaar)"

#: misc-utils/findmnt.c:115
msgid "filesystem size used"
msgstr "bestandssysteemgrootte (gebruikt)"

#: misc-utils/findmnt.c:116
msgid "filesystem use percentage"
msgstr "bestandssysteemgebruik (percentage)"

#: misc-utils/findmnt.c:117
msgid "filesystem root"
msgstr "bestandssysteemhoofdmap"

#: misc-utils/findmnt.c:118
msgid "task ID"
msgstr "taak-ID"

#: misc-utils/findmnt.c:119
msgid "mount ID"
msgstr "mount-ID"

#: misc-utils/findmnt.c:120
msgid "optional mount fields"
msgstr "optionele mount-velden"

#: misc-utils/findmnt.c:121
msgid "VFS propagation flags"
msgstr "VFS-doorgavevlaggen"

#: misc-utils/findmnt.c:122
msgid "dump(8) period in days [fstab only]"
msgstr "dump(8)-periode in dagen [alleen in 'fstab']"

#: misc-utils/findmnt.c:123
msgid "pass number on parallel fsck(8) [fstab only]"
msgstr "doorloopnummer bij parallelle fsck(8) [alleen in 'fstab']"

#: misc-utils/findmnt.c:333
#, c-format
msgid "unknown action: %s"
msgstr "onbekende actie: %s"

#: misc-utils/findmnt.c:643
msgid "mount"
msgstr "aankoppeling"

#: misc-utils/findmnt.c:646
msgid "umount"
msgstr "afkoppeling"

#: misc-utils/findmnt.c:649
msgid "remount"
msgstr "heraankoppeling"

#: misc-utils/findmnt.c:652
msgid "move"
msgstr "verplaatsing"

#: misc-utils/findmnt.c:814 misc-utils/findmnt.c:1077 sys-utils/eject.c:718
#: sys-utils/mount.c:322
msgid "failed to initialize libmount table"
msgstr "initialiseren van libmount-tabel is mislukt"

#: misc-utils/findmnt.c:841 text-utils/hexdump-parse.c:84
#, c-format
msgid "can't read %s"
msgstr "kan %s niet lezen"

#: misc-utils/findmnt.c:1017 misc-utils/findmnt.c:1083
#: misc-utils/findmnt-verify.c:94 misc-utils/findmnt-verify.c:482
#: sys-utils/fstrim.c:187 sys-utils/mount.c:131 sys-utils/mount.c:179
#: sys-utils/swapoff.c:56 sys-utils/swapoff.c:155 sys-utils/swapon.c:245
#: sys-utils/swapon.c:275 sys-utils/swapon.c:734 sys-utils/umount.c:170
msgid "failed to initialize libmount iterator"
msgstr "initialiseren van libmount-iterator is mislukt"

#: misc-utils/findmnt.c:1089
msgid "failed to initialize libmount tabdiff"
msgstr "initialiseren van libmount-tabelverschil is mislukt"

#: misc-utils/findmnt.c:1117
msgid "poll() failed"
msgstr "poll() is mislukt"

#: misc-utils/findmnt.c:1191
#, c-format
msgid ""
" %1$s [options]\n"
" %1$s [options] <device> | <mountpoint>\n"
" %1$s [options] <device> <mountpoint>\n"
" %1$s [options] [--source <device>] [--target <path> | --mountpoint <dir>]\n"
msgstr ""
"  %1$s [opties]\n"
"  %1$s [opties] <apparaat> | <aankoppelingspunt>\n"
"  %1$s [opties] <apparaat> <aankoppelingspunt>\n"
"  %1$s [opties] [--source <apparaat>] [--target <pad> | --mountpoint <map>]\n"

#: misc-utils/findmnt.c:1198
msgid "Find a (mounted) filesystem.\n"
msgstr "Zoekt een (aangekoppeld) bestandssysteem.\n"

#: misc-utils/findmnt.c:1201
msgid " -s, --fstab            search in static table of filesystems\n"
msgstr "  -s, --fstab            in de statische tabel van bestandssystemen zoeken\n"

#: misc-utils/findmnt.c:1202
#, fuzzy
msgid ""
" -m, --mtab             search in table of mounted filesystems\n"
"                          (includes user space mount options)\n"
msgstr ""
"  -k, --kernel           in de kerneltabel van aangekoppelde bestandssystemen\n"
"                           zoeken (standaard)\n"

#: misc-utils/findmnt.c:1204
msgid ""
" -k, --kernel           search in kernel table of mounted\n"
"                          filesystems (default)\n"
msgstr ""
"  -k, --kernel           in de kerneltabel van aangekoppelde bestandssystemen\n"
"                           zoeken (standaard)\n"

#: misc-utils/findmnt.c:1207
msgid " -p, --poll[=<list>]    monitor changes in table of mounted filesystems\n"
msgstr ""
"  -p, --poll[=<lijst>]   wijzigingen in tabel van aangekoppelde bestandssystemen\n"
"                            monitoren\n"

#: misc-utils/findmnt.c:1208
msgid " -w, --timeout <num>    upper limit in milliseconds that --poll will block\n"
msgstr "  -w, --timeout <getal>  maximum tijd (in milliseconden) dat '--poll' blokkeert\n"

#: misc-utils/findmnt.c:1211
msgid " -A, --all              disable all built-in filters, print all filesystems\n"
msgstr ""
"  -A, --all              alle ingebouwde filters uitschakelen en alle\n"
"                           bestandssystemen weergeven\n"

#: misc-utils/findmnt.c:1212
msgid " -a, --ascii            use ASCII chars for tree formatting\n"
msgstr "  -a, --ascii            ASCII-tekens gebruiken voor het tekenen van de boom\n"

#: misc-utils/findmnt.c:1213
msgid " -b, --bytes            print sizes in bytes rather than in human readable format\n"
msgstr "  -b, --bytes            groottes in bytes weergeven i.p.v. in leesbare vorm\n"

#: misc-utils/findmnt.c:1214
msgid " -C, --nocanonicalize   don't canonicalize when comparing paths\n"
msgstr "  -C, --no-canonicalize  paden bij vergelijken niet canoniek maken\n"

#: misc-utils/findmnt.c:1215
msgid " -c, --canonicalize     canonicalize printed paths\n"
msgstr "  -c, --canonicalize     getoonde paden canoniek maken\n"

#: misc-utils/findmnt.c:1216
msgid " -D, --df               imitate the output of df(1)\n"
msgstr "  -D, --df               de uitvoer van df(1) nabootsen\n"

#: misc-utils/findmnt.c:1217
msgid " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
msgstr "  -d, --direction <woord>  zoekrichting, 'forward' of 'backward'\n"

#: misc-utils/findmnt.c:1218
msgid ""
" -e, --evaluate         convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
"                          to device names\n"
msgstr ""
"  -e, --evaluate         tags (LABEL,UUID,PARTUUID,PARTLABEL) omzetten\n"
"                           naar apparaatnamen\n"

#: misc-utils/findmnt.c:1220
msgid " -F, --tab-file <path>  alternative file for -s, -m or -k options\n"
msgstr "  -F, --tab-file <pad>   alternatief bestand voor de opties '-k', '-m' of '-s'\n"

#: misc-utils/findmnt.c:1221
msgid " -f, --first-only       print the first found filesystem only\n"
msgstr "  -f, --first-only       alleen het eerstgevonden bestandssysteem tonen\n"

#: misc-utils/findmnt.c:1222
msgid " -i, --invert           invert the sense of matching\n"
msgstr "  -i, --invert           de overeenkomsten inverteren\n"

#: misc-utils/findmnt.c:1223 misc-utils/lslocks.c:500 sys-utils/lsns.c:619
msgid " -J, --json             use JSON output format\n"
msgstr "  -J, --json             uitvoer in JSON-opmaak produceren\n"

#: misc-utils/findmnt.c:1224 sys-utils/lsns.c:620
msgid " -l, --list             use list format output\n"
msgstr "  -l, --list             uitvoer in vorm van lijst produceren\n"

#: misc-utils/findmnt.c:1225
msgid " -N, --task <tid>       use alternative namespace (/proc/<tid>/mountinfo file)\n"
msgstr ""
"  -N, --task <tid>       alternatieve naamsruimte gebruiken\n"
"                           (het /proc/<tid>/mountinfo bestand)\n"

#: misc-utils/findmnt.c:1226
msgid " -n, --noheadings       don't print column headings\n"
msgstr "  -n, --noheadings       geen kopregel tonen\n"

#: misc-utils/findmnt.c:1227
msgid " -O, --options <list>   limit the set of filesystems by mount options\n"
msgstr "  -O, --options <lijst>  set van bestandssystemen beperken via aankoppelingsopties\n"

#: misc-utils/findmnt.c:1228
msgid " -o, --output <list>    the output columns to be shown\n"
msgstr "  -o, --output <lijst>   weer te geven uitvoerkolommen\n"

#: misc-utils/findmnt.c:1229
msgid " -P, --pairs            use key=\"value\" output format\n"
msgstr "  -P, --pairs            uitvoer produceren in de vorm van sleutel=\"waarde\"\n"

#: misc-utils/findmnt.c:1230
msgid " -R, --submounts        print all submounts for the matching filesystems\n"
msgstr ""
"  -R, --submounts        alle subaankoppelingen tonen voor overeenkomende\n"
"                           bestandssystemen\n"

#: misc-utils/findmnt.c:1231
msgid " -r, --raw              use raw output format\n"
msgstr "  -r, --raw              rauwe uitvoer produceren\n"

#: misc-utils/findmnt.c:1232
msgid ""
" -S, --source <string>  the device to mount (by name, maj:min, \n"
"                          LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
msgstr ""
"  -S, --source <tekst>   het aan te koppelen apparaat (via naam, LABEL=, UUID=,\n"
"                           PARTUUID=, PARTLABEL=, of hoofdnummmer:subnummer)\n"

#: misc-utils/findmnt.c:1234
msgid " -T, --target <path>    the path to the filesystem to use\n"
msgstr "  -T, --target <pad>     het pad van het te gebruiken bestandssysteem\n"

#: misc-utils/findmnt.c:1235
#, fuzzy
msgid "     --tree             enable tree format output is possible\n"
msgstr "  -l, --list             uitvoer in vorm van lijst produceren\n"

#: misc-utils/findmnt.c:1236
msgid " -M, --mountpoint <dir> the mountpoint directory\n"
msgstr "  -M, --mountpoint <map>   de map van het aankoppelingspunt\n"

#: misc-utils/findmnt.c:1237
msgid " -t, --types <list>     limit the set of filesystems by FS types\n"
msgstr "  -t, --types <lijst>    set van bestandssystemen beperken tot deze soorten\n"

#: misc-utils/findmnt.c:1238
msgid " -U, --uniq             ignore filesystems with duplicate target\n"
msgstr "  -U, --uniq             bestandssystemen met reeds bestaand doel negeren\n"

#: misc-utils/findmnt.c:1239 misc-utils/lslocks.c:506 sys-utils/lsns.c:625
msgid " -u, --notruncate       don't truncate text in columns\n"
msgstr "  -u, --notruncate       tekst in de kolommen niet afkappen\n"

#: misc-utils/findmnt.c:1240
msgid " -v, --nofsroot         don't print [/dir] for bind or btrfs mounts\n"
msgstr "  -v, --nofsroot         geen [/map] tonen voor bind of btrfs aankoppelingen\n"

#: misc-utils/findmnt.c:1243
msgid " -x, --verify           verify mount table content (default is fstab)\n"
msgstr ""
"  -x, --verify           inhoud van aankoppelingstabel controleren\n"
"                           (standaard fstab)\n"

#: misc-utils/findmnt.c:1244
msgid "     --verbose          print more details\n"
msgstr "      --verbose          gedetailleerde uitvoer produceren\n"

#: misc-utils/findmnt.c:1375
#, c-format
msgid "unknown direction '%s'"
msgstr "onbekende richting '%s'"

#: misc-utils/findmnt.c:1447
msgid "invalid TID argument"
msgstr "ongeldig TID-argument"

#: misc-utils/findmnt.c:1518
msgid "--poll accepts only one file, but more specified by --tab-file"
msgstr "optie '--poll' accepteert slechts één bestand, maar '--tab-file' geeft er meerdere"

#: misc-utils/findmnt.c:1522
msgid "options --target and --source can't be used together with command line element that is not an option"
msgstr "opties '--target' en '--source' gaan niet samen met andere argumenten"

#: misc-utils/findmnt.c:1575
msgid "failed to initialize libmount cache"
msgstr "initialiseren van libmount-cache is mislukt"

#: misc-utils/findmnt.c:1618
#, c-format
msgid "%s column is requested, but --poll is not enabled"
msgstr "kolom %s wordt gevraagd, maar '--poll' is niet gegeven"

#: misc-utils/findmnt-verify.c:116
msgid "target specified more than once"
msgstr "doel is meer dan eens gegeven"

#: misc-utils/findmnt-verify.c:118
#, c-format
msgid "wrong order: %s specified before %s"
msgstr "verkeerde volgorde: %s is gegeven voor %s"

#: misc-utils/findmnt-verify.c:133
msgid "undefined target (fs_file)"
msgstr "ongedefinieerd doel (fs_file)"

#: misc-utils/findmnt-verify.c:140
#, c-format
msgid "non-canonical target path (real: %s)"
msgstr "niet-canoniek doelpad (werkelijk pad: %s)"

#: misc-utils/findmnt-verify.c:145
#, c-format
msgid "unreachable on boot required target: %m"
msgstr "onbereikbaar bij-opstarten-vereist doel: %m"

#: misc-utils/findmnt-verify.c:147
#, c-format
msgid "unreachable target: %m"
msgstr "onbereikbaar doel: %m"

#: misc-utils/findmnt-verify.c:151
msgid "target is not a directory"
msgstr "doel is geen map"

#: misc-utils/findmnt-verify.c:153
msgid "target exists"
msgstr "doel bestaat"

#: misc-utils/findmnt-verify.c:165
#, c-format
msgid "unreachable on boot required source: %s=%s"
msgstr "onbereikbare bij-opstarten-vereiste bron %s=%s"

#: misc-utils/findmnt-verify.c:167
#, c-format
msgid "unreachable: %s=%s"
msgstr "onbereikbaar: %s=%s"

#: misc-utils/findmnt-verify.c:169
#, c-format
msgid "%s=%s translated to %s"
msgstr "%s=%s is vertaald naar %s"

#: misc-utils/findmnt-verify.c:190
msgid "undefined source (fs_spec)"
msgstr "ongedefinieerde bron (fs_spec)"

#: misc-utils/findmnt-verify.c:199
#, c-format
msgid "unsupported source tag: %s"
msgstr "niet-ondersteunde bron-tag: %s"

#: misc-utils/findmnt-verify.c:206
#, c-format
msgid "do not check %s source (pseudo/net)"
msgstr "%s-bron niet controleren (pseudo/net)"

#: misc-utils/findmnt-verify.c:209
#, c-format
msgid "unreachable source: %s: %m"
msgstr "onbereikbare bron %s: %m"

#: misc-utils/findmnt-verify.c:212
#, c-format
msgid "non-bind mount source %s is a directory or regular file"
msgstr "non-bind aankoppelingsbron %s is een map of gewoon bestand"

#: misc-utils/findmnt-verify.c:215
#, c-format
msgid "source %s is not a block device"
msgstr "bron %s is geen blok-apparaat"

#: misc-utils/findmnt-verify.c:217
#, c-format
msgid "source %s exists"
msgstr "bron %s bestaat"

#: misc-utils/findmnt-verify.c:230
#, c-format
msgid "VFS options: %s"
msgstr "VFS-opties: %s"

#: misc-utils/findmnt-verify.c:234
#, c-format
msgid "FS options: %s"
msgstr "Bestandssysteemopties: %s"

#: misc-utils/findmnt-verify.c:238
#, c-format
msgid "userspace options: %s"
msgstr "Gebruikersopties: %s"

#: misc-utils/findmnt-verify.c:252
#, fuzzy, c-format
msgid "unsupported swaparea discard policy: %s"
msgstr "ongeldig verwerpingsbeleid: %s"

#: misc-utils/findmnt-verify.c:260
#, fuzzy
msgid "failed to parse swaparea priority option"
msgstr "ontleden van prioriteit is mislukt"

#: misc-utils/findmnt-verify.c:396
#, c-format
msgid "do not check %s FS type (pseudo/net)"
msgstr "%s-bestandssysteemsoort niet controleren (pseudo/net)"

#: misc-utils/findmnt-verify.c:406
msgid "\"none\" FS type is recommended for bind or move oprations only"
msgstr "bestandssysteemsoort \"none\" wordt alleen aangeraden voor 'bind' of 'move'"

#: misc-utils/findmnt-verify.c:414
#, fuzzy, c-format
msgid "%s seems unsupported by the current kernel"
msgstr "CD-ROM-snelheidskeuzecommando wordt niet ondersteund door deze kernel"

#: misc-utils/findmnt-verify.c:420 misc-utils/findmnt-verify.c:421
msgid "cannot detect on-disk filesystem type"
msgstr "kan bestandssysteemsoort op schijf niet determineren"

#: misc-utils/findmnt-verify.c:428
#, c-format
msgid "%s does not match with on-disk %s"
msgstr "%s komt niet overeen met %s op schijf"

#: misc-utils/findmnt-verify.c:431
#, fuzzy, c-format
msgid "on-disk %s seems unsupported by the current kernel"
msgstr "CD-ROM-snelheidskeuzecommando wordt niet ondersteund door deze kernel"

#: misc-utils/findmnt-verify.c:433
#, c-format
msgid "FS type is %s"
msgstr "Bestandssysteemsoort is %s"

#: misc-utils/findmnt-verify.c:445
#, c-format
msgid "recommended root FS passno is 1 (current is %d)"
msgstr "het aangeraden fsck-volgordenummer voor het hoofdbestandssysteem is 1 (momenteel is het %d)"

#: misc-utils/findmnt-verify.c:512
#, c-format
msgid "%d parse error"
msgid_plural "%d parse errors"
msgstr[0] "%d ontledingsfout"
msgstr[1] "%d ontledingsfouten"

#: misc-utils/findmnt-verify.c:513
#, c-format
msgid ", %d error"
msgid_plural ", %d errors"
msgstr[0] ", %d fout"
msgstr[1] ", %d fouten"

#: misc-utils/findmnt-verify.c:514
#, c-format
msgid ", %d warning"
msgid_plural ", %d warnings"
msgstr[0] ", %d waarschuwing"
msgstr[1] ", %d waarschuwingen"

#: misc-utils/findmnt-verify.c:517
#, c-format
msgid "Success, no errors or warnings detected\n"
msgstr "Gelukt -- geen fouten of waarschuwingen gevonden\n"

#: misc-utils/getopt.c:246
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Typ '%s --help' voor meer informatie.\n"

#: misc-utils/getopt.c:304
msgid "empty long option after -l or --long argument"
msgstr "lege optiereeks na optie '-l' of '--long'"

#: misc-utils/getopt.c:325
msgid "unknown shell after -s or --shell argument"
msgstr "onbekende shell na optie '-s' of '--shell'"

#: misc-utils/getopt.c:332
#, c-format
msgid ""
" %1$s <optstring> <parameters>\n"
" %1$s [options] [--] <optstring> <parameters>\n"
" %1$s [options] -o|--options <optstring> [options] [--] <parameters>\n"
msgstr ""
"  %1$s <optiereeks> <parameters>\n"
"  %1$s [opties] [--] <optiereeks> <parameters>\n"
"  %1$s [opties] -o|--options <optiereeks> [opties] [--] <parameters>\n"

#: misc-utils/getopt.c:338
msgid "Parse command options.\n"
msgstr "Ontleedt de bij een opdracht gegeven opties.\n"

#: misc-utils/getopt.c:341
msgid " -a, --alternative             allow long options starting with single -\n"
msgstr "  -a, --alternative             lange opties met één '-' toestaan\n"

#: misc-utils/getopt.c:342
msgid " -l, --longoptions <longopts>  the long options to be recognized\n"
msgstr "  -l, --longoptions=<optiereeks>  te herkennen lange opties\n"

#: misc-utils/getopt.c:343
msgid " -n, --name <progname>         the name under which errors are reported\n"
msgstr "  -n, --name=<programmanaam>    fouten rapporteren onder deze naam\n"

#: misc-utils/getopt.c:344
msgid " -o, --options <optstring>     the short options to be recognized\n"
msgstr "  -o, --options=<optiereeks>    te herkennen korte opties\n"

#: misc-utils/getopt.c:345
msgid " -q, --quiet                   disable error reporting by getopt(3)\n"
msgstr "  -q, --quiet                   foutrapportage van getopt(3) uitzetten\n"

#: misc-utils/getopt.c:346
msgid " -Q, --quiet-output            no normal output\n"
msgstr "  -Q, --quiet-output            gewone uitvoer onderdrukken\n"

#: misc-utils/getopt.c:347
msgid " -s, --shell <shell>           set quoting conventions to those of <shell>\n"
msgstr "  -s, --shell <shell>           aanhalingsconventies van deze shell gebruiken\n"

#: misc-utils/getopt.c:348
msgid " -T, --test                    test for getopt(1) version\n"
msgstr "  -T, --test                    bepalen of dit een verbeterde getopt(1) is\n"

#: misc-utils/getopt.c:349
msgid " -u, --unquoted                do not quote the output\n"
msgstr "  -u, --unquoted                de uitvoer niet aanhalen\n"

#: misc-utils/getopt.c:399 misc-utils/getopt.c:459
msgid "missing optstring argument"
msgstr "ontbrekende optiereeks"

#: misc-utils/getopt.c:454
msgid "internal error, contact the author."
msgstr "**interne programmafout**; neem contact op met de auteur"

#: misc-utils/kill.c:234
#, c-format
msgid "unknown signal %s; valid signals:"
msgstr "onbekend signaal %s; geldige signalen zijn:"

#: misc-utils/kill.c:302
#, c-format
msgid " %s [options] <pid>|<name>...\n"
msgstr "  %s [opties] <PID>|<procesnaam>...\n"

#: misc-utils/kill.c:305
msgid "Forcibly terminate a process.\n"
msgstr "Een proces geforceerd beëindigen, oftewel elimineren.\n"

#: misc-utils/kill.c:308
msgid ""
" -a, --all              do not restrict the name-to-pid conversion to processes\n"
"                          with the same uid as the present process\n"
msgstr ""
"  -a, --all                 herleiding van naam naar PID niet beperken tot\n"
"                              processen met zelfde UID als huidige proces\n"

#: misc-utils/kill.c:310
msgid " -s, --signal <signal>  send this <signal> instead of SIGTERM\n"
msgstr "  -s, --signal <signaal>    te zenden signaal (in plaats van SIGTERM)\n"

#: misc-utils/kill.c:312
msgid " -q, --queue <value>    use sigqueue(2), not kill(2), and pass <value> as data\n"
msgstr "  -q, --queue <getal>       sigqueue(2) gebruiken met <getal> als data\n"

#: misc-utils/kill.c:314
msgid " -p, --pid              print pids without signaling them\n"
msgstr "  -p, --pid                 PID's tonen in plaats van een signaal te zenden\n"

#: misc-utils/kill.c:315
msgid " -l, --list[=<signal>]  list signal names, or convert a signal number to a name\n"
msgstr "  -l, --list[=<signaal>]    signaalnamen tonen, of eentje naar naam converteren\n"

#: misc-utils/kill.c:316
msgid " -L, --table            list signal names and numbers\n"
msgstr "  -L, --table               tabel van signaalnamen en -nummers tonen\n"

#: misc-utils/kill.c:317
msgid "     --verbose          print pids that will be signaled\n"
msgstr "      --verbose             tonen welke PID's een signaal zullen krijgen\n"

#: misc-utils/kill.c:367 misc-utils/kill.c:376
#, c-format
msgid "unknown signal: %s"
msgstr "onbekend signaal %s"

#: misc-utils/kill.c:387 misc-utils/kill.c:390 misc-utils/kill.c:399
#: misc-utils/kill.c:411 misc-utils/kill.c:434
#, c-format
msgid "%s and %s are mutually exclusive"
msgstr "opties %s en %s gaan niet samen"

#: misc-utils/kill.c:396 misc-utils/kill.c:438 misc-utils/rename.c:180
#: sys-utils/ipcrm.c:160 term-utils/agetty.c:797 term-utils/agetty.c:806
msgid "not enough arguments"
msgstr "te weinig argumenten"

#: misc-utils/kill.c:409
#, c-format
msgid "option '%s' requires an argument"
msgstr "optie '%s' vereist een argument"

#: misc-utils/kill.c:414 sys-utils/eject.c:205 sys-utils/eject.c:230
#: sys-utils/losetup.c:694 sys-utils/tunelp.c:161 sys-utils/tunelp.c:168
#: sys-utils/tunelp.c:175 sys-utils/tunelp.c:182 sys-utils/tunelp.c:189
#: sys-utils/tunelp.c:195 sys-utils/tunelp.c:199 sys-utils/tunelp.c:206
#: sys-utils/tunelp.c:231 term-utils/setterm.c:214 term-utils/setterm.c:217
#: term-utils/setterm.c:236 term-utils/setterm.c:238 term-utils/setterm.c:273
#: term-utils/setterm.c:275 term-utils/setterm.c:292 term-utils/setterm.c:299
#: term-utils/setterm.c:301 term-utils/setterm.c:313 term-utils/setterm.c:315
#: term-utils/setterm.c:324 term-utils/setterm.c:332 term-utils/setterm.c:347
#: term-utils/setterm.c:349 term-utils/setterm.c:361 term-utils/setterm.c:363
#: term-utils/setterm.c:374 term-utils/setterm.c:542 term-utils/setterm.c:547
#: term-utils/setterm.c:552 term-utils/setterm.c:557 term-utils/setterm.c:581
#: term-utils/setterm.c:586 term-utils/setterm.c:591 term-utils/setterm.c:596
#: term-utils/setterm.c:601 term-utils/setterm.c:606 term-utils/setterm.c:614
#: term-utils/setterm.c:647
msgid "argument error"
msgstr "onjuist argument"

#: misc-utils/kill.c:431
#, c-format
msgid "invalid signal name or number: %s"
msgstr "ongeldige signaalnaam of -nummer: %s"

#: misc-utils/kill.c:448
#, c-format
msgid "sending signal %d to pid %d\n"
msgstr "zenden van signaal %d naar PID %d\n"

#: misc-utils/kill.c:461
#, c-format
msgid "sending signal to %s failed"
msgstr "zenden van signaal naar %s is mislukt"

#: misc-utils/kill.c:507
#, c-format
msgid "cannot find process \"%s\""
msgstr "kan proces '%s' niet vinden"

#: misc-utils/logger.c:222
#, c-format
msgid "unknown facility name: %s"
msgstr "onbekende voorzieningsnaam in prioriteit: %s"

#: misc-utils/logger.c:228
#, c-format
msgid "unknown priority name: %s"
msgstr "onbekende prioriteitsnaam: %s"

#: misc-utils/logger.c:240
#, c-format
msgid "openlog %s: pathname too long"
msgstr "openlog %s: padnaam is te lang"

#: misc-utils/logger.c:267
#, c-format
msgid "socket %s"
msgstr "socket %s"

#: misc-utils/logger.c:306
#, c-format
msgid "failed to resolve name %s port %s: %s"
msgstr "herleiden van naam %s poort %s is mislukt: %s"

#: misc-utils/logger.c:323
#, c-format
msgid "failed to connect to %s port %s"
msgstr "verbinden met %s poort %s is mislukt"

#: misc-utils/logger.c:352
#, c-format
msgid "maximum input lines (%d) exceeded"
msgstr "maximum aantal invoerregels (%d) is overschreden"

#: misc-utils/logger.c:487
msgid "send message failed"
msgstr "zenden van bericht is mislukt"

#: misc-utils/logger.c:558
#, c-format
msgid "structured data ID '%s' is not unique"
msgstr "ID '%s' voor gestructureerde data is niet uniek"

#: misc-utils/logger.c:572
#, c-format
msgid "--sd-id was not specified for --sd-param %s"
msgstr "'--sd-id' werd niet gegeven voor '--sd-param %s'"

#: misc-utils/logger.c:754
msgid "localtime() failed"
msgstr "localtime() is mislukt"

#: misc-utils/logger.c:764
#, c-format
msgid "hostname '%s' is too long"
msgstr "hostnaam '%s' is te lang"

#: misc-utils/logger.c:770
#, c-format
msgid "tag '%s' is too long"
msgstr "label '%s' is te lang"

#: misc-utils/logger.c:833
#, c-format
msgid "ignoring unknown option argument: %s"
msgstr "onbekend optie-argument %s wordt genegeerd"

#: misc-utils/logger.c:845
#, c-format
msgid "invalid argument: %s: using automatic errors"
msgstr "ongeldig argument: %s -- 'auto' wordt gebruikt"

#: misc-utils/logger.c:994
#, c-format
msgid " %s [options] [<message>]\n"
msgstr "  %s [opties] [<bericht>]\n"

#: misc-utils/logger.c:997
msgid "Enter messages into the system log.\n"
msgstr "Schrijft berichten naar het systeemlogboek.\n"

#: misc-utils/logger.c:1000
msgid " -i                       log the logger command's PID\n"
msgstr "  -i                     de PID van het logger-commando loggen\n"

#: misc-utils/logger.c:1001
msgid "     --id[=<id>]          log the given <id>, or otherwise the PID\n"
msgstr "      --id[=<ID>]        onder <ID> loggen  (standaard is de PID)\n"

#: misc-utils/logger.c:1002
msgid " -f, --file <file>        log the contents of this file\n"
msgstr "  -f, --file <bestand>   de inhoud van dit bestand loggen\n"

#: misc-utils/logger.c:1003
msgid " -e, --skip-empty         do not log empty lines when processing files\n"
msgstr "  -e, --skip-empty       lege regels niet loggen bij verwerken van bestanden\n"

#: misc-utils/logger.c:1004
msgid "     --no-act             do everything except the write the log\n"
msgstr "      --no-act           alles doen behalve het logbericht schrijven\n"

#: misc-utils/logger.c:1005
msgid " -p, --priority <prio>    mark given message with this priority\n"
msgstr "  -p, --priority <getal>   gegeven bericht met deze prioriteit markeren\n"

#: misc-utils/logger.c:1006
msgid "     --octet-count        use rfc6587 octet counting\n"
msgstr "      --octet-count      de octet-telling van RFC-6587 gebruiken\n"

#: misc-utils/logger.c:1007
msgid "     --prio-prefix        look for a prefix on every line read from stdin\n"
msgstr "      --prio-prefix      naar prefix kijken op elke regel van standaardinvoer\n"

#: misc-utils/logger.c:1008
msgid " -s, --stderr             output message to standard error as well\n"
msgstr "  -s, --stderr           bericht ook naar standaardfoutuitvoer schrijven\n"

#: misc-utils/logger.c:1009
msgid " -S, --size <size>        maximum size for a single message\n"
msgstr "  -S, --size <getal>     maximumgrootte van een enkel bericht\n"

#: misc-utils/logger.c:1010
msgid " -t, --tag <tag>          mark every line with this tag\n"
msgstr "  -t, --tag <tekstje>    elke regel labelen met dit tekstje\n"

#: misc-utils/logger.c:1011
msgid " -n, --server <name>      write to this remote syslog server\n"
msgstr "  -n, --server <naam>    naar deze syslog-server op afstand loggen\n"

#: misc-utils/logger.c:1012
msgid " -P, --port <port>        use this port for UDP or TCP connection\n"
msgstr "  -P, --port <nummer>    te gebruiken poort voor UDP- of TCP-verbinding\n"

#: misc-utils/logger.c:1013
msgid " -T, --tcp                use TCP only\n"
msgstr "  -T, --tcp              alleen TCP gebruiken\n"

#: misc-utils/logger.c:1014
msgid " -d, --udp                use UDP only\n"
msgstr "  -d, --udp              alleen UDP gebruiken\n"

#: misc-utils/logger.c:1015
msgid "     --rfc3164            use the obsolete BSD syslog protocol\n"
msgstr "      --rfc3164          het verouderde BSD-syslog-protocol gebruiken\n"

#: misc-utils/logger.c:1016
msgid ""
"     --rfc5424[=<snip>]   use the syslog protocol (the default for remote);\n"
"                            <snip> can be notime, or notq, and/or nohost\n"
msgstr ""
"      --rfc5424[=<weg>]  het nieuwe protocol gebruiken  (standaard op afstand);\n"
"                            <weg> kan zijn: 'notime', of 'notq', en/of 'nohost'\n"

#: misc-utils/logger.c:1018
msgid "     --sd-id <id>         rfc5424 structured data ID\n"
msgstr "      --sd-id <ID>       gestructureerdedata-ID voor RFC-5424\n"

#: misc-utils/logger.c:1019
msgid "     --sd-param <data>    rfc5424 structured data name=value\n"
msgstr "      --sd-param <data>  gestructureerde data (naam=waarde) voor RFC-5424\n"

#: misc-utils/logger.c:1020
msgid "     --msgid <msgid>      set rfc5424 message id field\n"
msgstr "      --msgid <bericht-ID>   bericht-ID voor RFC-5424\n"

#: misc-utils/logger.c:1021
msgid " -u, --socket <socket>    write to this Unix socket\n"
msgstr "  -u, --socket <apparaat>    naar deze Unix-socket schrijven\n"

# FIXME: no angular brackets around literals
#: misc-utils/logger.c:1022
msgid ""
"     --socket-errors[=<on|off|auto>]\n"
"                          print connection errors when using Unix sockets\n"
msgstr "      --socket-errors[=on|off|auto]  verbindingsfouten met Unix sockets melden\n"

#: misc-utils/logger.c:1025
msgid "     --journald[=<file>]  write journald entry\n"
msgstr "      --journald[=<bestand>]   een journald-item schrijven\n"

#: misc-utils/logger.c:1112
#, c-format
msgid "file %s"
msgstr "bestand %s"

#: misc-utils/logger.c:1127
msgid "failed to parse id"
msgstr "ontleden van ID is mislukt"

#: misc-utils/logger.c:1145
msgid "failed to parse message size"
msgstr "ontleden van berichtgrootte is mislukt"

#: misc-utils/logger.c:1180
msgid "--msgid cannot contain space"
msgstr "een bericht-ID mag geen spatie bevatten"

#: misc-utils/logger.c:1202
#, c-format
msgid "invalid structured data ID: '%s'"
msgstr "ongeldig ID voor gestructureerde data: '%s'"

#: misc-utils/logger.c:1207
#, c-format
msgid "invalid structured data parameter: '%s'"
msgstr "ongeldig argument voor gestructureerde data: '%s'"

#: misc-utils/logger.c:1217
msgid "--file <file> and <message> are mutually exclusive, message is ignored"
msgstr "een bestand en een bericht gaan niet samen; het bericht wordt genegeerd"

#: misc-utils/logger.c:1224
msgid "journald entry could not be written"
msgstr "journald-item kon niet geschreven worden"

#: misc-utils/look.c:354
#, c-format
msgid " %s [options] <string> [<file>...]\n"
msgstr "  %s [opties] <tekenreeks> [<bestand>...]\n"

#: misc-utils/look.c:357
msgid "Display lines beginning with a specified string.\n"
msgstr "Toont regels die met de aangegeven tekenreeks beginnen.\n"

#: misc-utils/look.c:360
msgid " -a, --alternative        use the alternative dictionary\n"
msgstr "  -a, --alternative          het alternatieve woordenboek gebruiken\n"

#: misc-utils/look.c:361
msgid " -d, --alphanum           compare only blanks and alphanumeric characters\n"
msgstr "  -d, --alphanum            alleen witruimte en alfanumerieke tekens vergelijken\n"

#: misc-utils/look.c:362
msgid " -f, --ignore-case        ignore case differences when comparing\n"
msgstr "  -f, --ignore-case         verschil tussen hoofd- en kleine letters negeren\n"

#: misc-utils/look.c:363
msgid " -t, --terminate <char>   define the string-termination character\n"
msgstr "  -t, --terminate <teken>   het teken dat een tekenreeks beëindigt\n"

#: misc-utils/lsblk.c:160
msgid "device name"
msgstr "apparaatnaam"

#: misc-utils/lsblk.c:161
msgid "internal kernel device name"
msgstr "interne kernelapparaatnaam"

#: misc-utils/lsblk.c:162
msgid "internal parent kernel device name"
msgstr "interne ouder-kernelapparaatnaam"

#: misc-utils/lsblk.c:165 sys-utils/zramctl.c:84
msgid "where the device is mounted"
msgstr "waar het apparaat is aangekoppeld"

#: misc-utils/lsblk.c:166
msgid "filesystem LABEL"
msgstr "bestandssysteemlabel"

#: misc-utils/lsblk.c:169
msgid "partition type UUID"
msgstr "partitietype-UUID"

#: misc-utils/lsblk.c:170
msgid "partition LABEL"
msgstr "partitielabel"

#: misc-utils/lsblk.c:174
msgid "read-ahead of the device"
msgstr "vooruitlezing van het apparaat"

#: misc-utils/lsblk.c:175 sys-utils/losetup.c:75
msgid "read-only device"
msgstr "alleenlezen-apparaat"

#: misc-utils/lsblk.c:176
msgid "removable device"
msgstr "verwijderbaar apparaat"

#: misc-utils/lsblk.c:177
msgid "removable or hotplug device (usb, pcmcia, ...)"
msgstr "verwijderbaar of hotplug-baar apparaat (USB, PCMCIA, ...)"

#: misc-utils/lsblk.c:178
msgid "rotational device"
msgstr "roterend apparaat"

#: misc-utils/lsblk.c:179
msgid "adds randomness"
msgstr "voegt willekeurigheid toe"

#: misc-utils/lsblk.c:180
msgid "device identifier"
msgstr "apparaat-ID"

#: misc-utils/lsblk.c:181
msgid "disk serial number"
msgstr "schijf-serienummer"

#: misc-utils/lsblk.c:182
msgid "size of the device"
msgstr "apparaatgrootte"

#: misc-utils/lsblk.c:183
msgid "state of the device"
msgstr "apparaattoestand"

#: misc-utils/lsblk.c:185
msgid "group name"
msgstr "groepsnaam"

#: misc-utils/lsblk.c:186
msgid "device node permissions"
msgstr "toegangsrechten van apparaat"

#: misc-utils/lsblk.c:187
msgid "alignment offset"
msgstr "uitlijningspositie"

#: misc-utils/lsblk.c:188
msgid "minimum I/O size"
msgstr "minimale in-/uitvoergrootte"

#: misc-utils/lsblk.c:189
msgid "optimal I/O size"
msgstr "optimale in-/uitvoergrootte"

#: misc-utils/lsblk.c:190
msgid "physical sector size"
msgstr "fysieke sectorgrootte"

#: misc-utils/lsblk.c:191
msgid "logical sector size"
msgstr "logische sectorgrootte"

#: misc-utils/lsblk.c:192
msgid "I/O scheduler name"
msgstr "naam van in-/uitvoerscheduler"

#: misc-utils/lsblk.c:193
msgid "request queue size"
msgstr "lengte van verzoekenrij"

#: misc-utils/lsblk.c:194
msgid "device type"
msgstr "apparaattype"

#: misc-utils/lsblk.c:195
msgid "discard alignment offset"
msgstr "uitlijningspositie verwerpen"

#: misc-utils/lsblk.c:196
msgid "discard granularity"
msgstr "granulariteit verwerpen"

#: misc-utils/lsblk.c:197
msgid "discard max bytes"
msgstr "maxbytes verwerpen"

#: misc-utils/lsblk.c:198
msgid "discard zeroes data"
msgstr "nullen verwerpen"

#: misc-utils/lsblk.c:199
msgid "write same max bytes"
msgstr "zelfde maxbytes schrijven"

#: misc-utils/lsblk.c:200
msgid "unique storage identifier"
msgstr "uniek opslag-ID"

#: misc-utils/lsblk.c:201
msgid "Host:Channel:Target:Lun for SCSI"
msgstr "Host:Kanaal:Doel:LUN voor SCSI"

#: misc-utils/lsblk.c:202
msgid "device transport type"
msgstr "apparaat-transporttype"

#: misc-utils/lsblk.c:203
msgid "de-duplicated chain of subsystems"
msgstr "ontdubbelde keten van subsystemen"

#: misc-utils/lsblk.c:204
msgid "device revision"
msgstr "apparaatrevisie"

#: misc-utils/lsblk.c:205
msgid "device vendor"
msgstr "apparaatproducent"

#: misc-utils/lsblk.c:206
msgid "zone model"
msgstr ""

#: misc-utils/lsblk.c:1290
msgid "failed to open device directory in sysfs"
msgstr "openen van apparatenmap in 'sysfs' is mislukt"

#: misc-utils/lsblk.c:1476
#, c-format
msgid "%s: failed to compose sysfs path"
msgstr "%s: componeren van 'sysfs'-pad is mislukt"

#: misc-utils/lsblk.c:1482
#, c-format
msgid "%s: failed to read link"
msgstr "%s: lezen van koppeling is mislukt"

#: misc-utils/lsblk.c:1504
#, c-format
msgid "%s: failed to get sysfs name"
msgstr "%s: verkrijgen van 'sysfs'-naam is mislukt"

#: misc-utils/lsblk.c:1513
#, c-format
msgid "%s: failed to get whole-disk device number"
msgstr "%s: achterhalen van apparaatnummer van gehele schijf is mislukt"

#: misc-utils/lsblk.c:1565 misc-utils/lsblk.c:1567 misc-utils/lsblk.c:1592
#: misc-utils/lsblk.c:1594
#, c-format
msgid "failed to parse list '%s'"
msgstr "ontleden van lijst '%s' is mislukt"

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:1572
#, c-format
msgid "the list of excluded devices is too large (limit is %d devices)"
msgstr "de lijst van uitgesloten apparaten is te lang (de limiet is %d apparaten)"

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:1599
#, c-format
msgid "the list of included devices is too large (limit is %d devices)"
msgstr "de lijst van ingesloten apparaten is te lang (de limiet is %d apparaten)"

#: misc-utils/lsblk.c:1630 sys-utils/wdctl.c:174
#, c-format
msgid " %s [options] [<device> ...]\n"
msgstr "  %s [opties] [<apparaat>...]\n"

#: misc-utils/lsblk.c:1633
msgid "List information about block devices.\n"
msgstr "Toont informatie over blok-apparaten.\n"

#: misc-utils/lsblk.c:1636
msgid " -a, --all            print all devices\n"
msgstr "  -a, --all             alle apparaten tonen\n"

#: misc-utils/lsblk.c:1638
msgid " -d, --nodeps         don't print slaves or holders\n"
msgstr "  -d, --nodeps          geen slaven of houders tonen\n"

#: misc-utils/lsblk.c:1639
msgid " -D, --discard        print discard capabilities\n"
msgstr "  -D, --discard         verwerpingsmogelijkheden tonen\n"

#: misc-utils/lsblk.c:1640
#, fuzzy
msgid " -z, --zoned          print zone model\n"
msgstr "  -c, --offline           alleen offline CPU's tonen\n"

#: misc-utils/lsblk.c:1641
msgid " -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
msgstr ""
"  -e, --exclude <lijst>   apparaten met deze hoofdnummers niet tonen\n"
"                            (standaard: RAM-schijven)\n"

#: misc-utils/lsblk.c:1642
msgid " -f, --fs             output info about filesystems\n"
msgstr "  -f, --fs              info tonen over bestandssystemen\n"

#: misc-utils/lsblk.c:1643
msgid " -i, --ascii          use ascii characters only\n"
msgstr "  -i, --ascii           alleen ASCII-tekens gebruiken\n"

#: misc-utils/lsblk.c:1644
msgid " -I, --include <list> show only devices with specified major numbers\n"
msgstr "  -I, --include <lijst>   alleen apparaten tonen met deze hoofdnummers\n"

#: misc-utils/lsblk.c:1645 sys-utils/lsmem.c:377
msgid " -J, --json           use JSON output format\n"
msgstr "  -J, --json            uitvoer in JSON-opmaak produceren\n"

#: misc-utils/lsblk.c:1646
msgid " -l, --list           use list format output\n"
msgstr "  -l, --list            uitvoer in vorm van lijst produceren\n"

#: misc-utils/lsblk.c:1647
msgid " -m, --perms          output info about permissions\n"
msgstr "  -m, --perms           info tonen over toegangsrechten\n"

#: misc-utils/lsblk.c:1648 sys-utils/lsmem.c:381
msgid " -n, --noheadings     don't print headings\n"
msgstr "  -n, --noheadings      geen kopregel tonen\n"

#: misc-utils/lsblk.c:1649 sys-utils/lsmem.c:382
msgid " -o, --output <list>  output columns\n"
msgstr "  -o, --output <lijst>  te tonen kolommen in de uitvoer\n"

#: misc-utils/lsblk.c:1650
msgid " -O, --output-all     output all columns\n"
msgstr "  -O, --output-all      alle kolommen tonen\n"

#: misc-utils/lsblk.c:1651
msgid " -p, --paths          print complete device path\n"
msgstr "  -p, --paths           volledige apparaatpad tonen\n"

#: misc-utils/lsblk.c:1654
msgid " -s, --inverse        inverse dependencies\n"
msgstr "  -s, --inverse         inverse afhankelijkheden gebruiken\n"

#: misc-utils/lsblk.c:1655
msgid " -S, --scsi           output info about SCSI devices\n"
msgstr "  -S, --scsi            info tonen over SCSI-apparaten\n"

#: misc-utils/lsblk.c:1656
msgid " -t, --topology       output info about topology\n"
msgstr "  -t, --topology        info tonen over topologie\n"

#: misc-utils/lsblk.c:1657
msgid " -x, --sort <column>  sort output by <column>\n"
msgstr "  -x, --sort <kolom>    uitvoer sorteren op deze <kolom>\n"

#: misc-utils/lsblk.c:1675
#, c-format
msgid "failed to access sysfs directory: %s"
msgstr "kan geen toegang krijgen tot 'sysfs'-map: %s"

#: misc-utils/lslocks.c:73
msgid "command of the process holding the lock"
msgstr "opdracht van het proces dat de vergrendeling bezit"

#: misc-utils/lslocks.c:74
msgid "PID of the process holding the lock"
msgstr "PID van het proces dat de vergrendeling bezit"

#: misc-utils/lslocks.c:75
msgid "kind of lock: FL_FLOCK or FL_POSIX."
msgstr "soort vergrendeling: FL_FLOCK of FL_POSIX"

#: misc-utils/lslocks.c:76
msgid "size of the lock"
msgstr "grootte van vergrendeling"

#: misc-utils/lslocks.c:77
msgid "lock access mode"
msgstr "toegangsmodus van vergrendeling"

#: misc-utils/lslocks.c:78
msgid "mandatory state of the lock: 0 (none), 1 (set)"
msgstr "verplichte toestand van vergrendeling: 0 (geen), 1 (ingesteld)"

#: misc-utils/lslocks.c:79
msgid "relative byte offset of the lock"
msgstr "relatieve bytepositie van vergrendeling"

#: misc-utils/lslocks.c:80
msgid "ending offset of the lock"
msgstr "eindpositie van vergrendeling"

#: misc-utils/lslocks.c:81
msgid "path of the locked file"
msgstr "pad van het vergrendelde bestand"

#: misc-utils/lslocks.c:82
msgid "PID of the process blocking the lock"
msgstr "PID van het proces dat de vergrendeling blokkeert"

#: misc-utils/lslocks.c:259
msgid "failed to parse ID"
msgstr "ontleden van ID is mislukt"

#: misc-utils/lslocks.c:281 sys-utils/nsenter.c:265
msgid "failed to parse pid"
msgstr "ontleden van PID is mislukt"

#: misc-utils/lslocks.c:284
msgid "(unknown)"
msgstr "(onbekend)"

#: misc-utils/lslocks.c:293
msgid "failed to parse start"
msgstr "ontleden van begin is mislukt"

#: misc-utils/lslocks.c:300
msgid "failed to parse end"
msgstr "ontleden van einde is mislukt"

#: misc-utils/lslocks.c:497
msgid "List local system locks.\n"
msgstr "Toont lokale systeemvergrendelingen.\n"

#: misc-utils/lslocks.c:501
msgid " -i, --noinaccessible   ignore locks without read permissions\n"
msgstr ""

#: misc-utils/lslocks.c:502 sys-utils/lsns.c:621
msgid " -n, --noheadings       don't print headings\n"
msgstr "  -n, --noheadings       geen kopregel tonen\n"

#: misc-utils/lslocks.c:503 sys-utils/lsns.c:622
msgid " -o, --output <list>    define which output columns to use\n"
msgstr "  -o, --output <lijst>   weer te geven uitvoerkolommen\n"

#: misc-utils/lslocks.c:504
msgid " -p, --pid <pid>        display only locks held by this process\n"
msgstr "  -p, --pid <PID>        alleen vergrendelingen van dit proces tonen\n"

#: misc-utils/lslocks.c:505 sys-utils/lsns.c:624
msgid " -r, --raw              use the raw output format\n"
msgstr "  -r, --raw              rauwe uitvoer produceren\n"

#: misc-utils/lslocks.c:563 schedutils/chrt.c:476 schedutils/ionice.c:177
#: schedutils/taskset.c:170 sys-utils/lsns.c:699 sys-utils/prlimit.c:585
msgid "invalid PID argument"
msgstr "ongeldig PID-argument"

#: misc-utils/mcookie.c:85
msgid "Generate magic cookies for xauth.\n"
msgstr "Genereert magische cookies voor xauth.\n"

#: misc-utils/mcookie.c:88
msgid " -f, --file <file>     use file as a cookie seed\n"
msgstr "  -f, --file <bestand>     als cookie-seed te gebruiken bestand\n"

#: misc-utils/mcookie.c:89
msgid " -m, --max-size <num>  limit how much is read from seed files\n"
msgstr "  -m, --max-size <getal>   beperken hoeveel uit seed-bestanden gelezen wordt\n"

#: misc-utils/mcookie.c:90
msgid " -v, --verbose         explain what is being done\n"
msgstr "  -v, --verbose            vermelden wat er gedaan wordt\n"

#: misc-utils/mcookie.c:120
#, c-format
msgid "Got %zu byte from %s\n"
msgid_plural "Got %zu bytes from %s\n"
msgstr[0] "%zu byte ontvangen van %s\n"
msgstr[1] "%zu bytes ontvangen van %s\n"

#: misc-utils/mcookie.c:125
#, c-format
msgid "closing %s failed"
msgstr "sluiten van %s is mislukt"

#: misc-utils/mcookie.c:164 sys-utils/blkdiscard.c:146 sys-utils/fstrim.c:308
#: text-utils/hexdump.c:117
msgid "failed to parse length"
msgstr "ontleden van lengte is mislukt"

#: misc-utils/mcookie.c:177
msgid "--max-size ignored when used without --file"
msgstr "optie '--max-size' wordt genegeerd zonder '--file'"

#: misc-utils/mcookie.c:185
#, c-format
msgid "Got %d byte from %s\n"
msgid_plural "Got %d bytes from %s\n"
msgstr[0] "%d byte ontvangen van %s\n"
msgstr[1] "%d bytes ontvangen van %s\n"

#: misc-utils/namei.c:90
#, c-format
msgid "failed to read symlink: %s"
msgstr "lezen van symlink %s is mislukt"

#: misc-utils/namei.c:283
#, c-format
msgid "%s - No such file or directory\n"
msgstr "%s -- Bestand of map bestaat niet\n"

#: misc-utils/namei.c:333
#, c-format
msgid " %s [options] <pathname>...\n"
msgstr "  %s [opties] <padnaam>...\n"

#: misc-utils/namei.c:336
msgid "Follow a pathname until a terminal point is found.\n"
msgstr "Volgt een padnaam totdat een eindpunt gevonden is.\n"

#: misc-utils/namei.c:339
msgid ""
" -h, --help          displays this help text\n"
" -V, --version       output version information and exit\n"
" -x, --mountpoints   show mount point directories with a 'D'\n"
" -m, --modes         show the mode bits of each file\n"
" -o, --owners        show owner and group name of each file\n"
" -l, --long          use a long listing format (-m -o -v) \n"
" -n, --nosymlinks    don't follow symlinks\n"
" -v, --vertical      vertical align of modes and owners\n"
msgstr ""
"  -h, --help           deze hulptekst tonen en stoppen\n"
"  -l, --long           uitgebreide extra informatie tonen ('-m -o -v')\n"
"  -m, --modes          de modus van elk bestand tonen\n"
"  -n, --nosymlinks     symbolische koppelingen niet volgen\n"
"  -o, --owners         namen van eigenaar en groep van elk bestand tonen\n"
"  -x, --mountpoints    aankoppelingspunten markeren met een 'D'\n"
"  -v, --vertical       bestandsmodus en eigenaarnamen verticaal uitlijnen\n"
"  -V, --version        programmaversie tonen en stoppen\n"

#: misc-utils/namei.c:408
msgid "pathname argument is missing"
msgstr "padnaam-argument ontbreekt"

#: misc-utils/namei.c:414 sys-utils/lsns.c:763
msgid "failed to allocate UID cache"
msgstr "reserveren van geheugen voor UID-cache is mislukt"

#: misc-utils/namei.c:417
msgid "failed to allocate GID cache"
msgstr "reserveren van geheugen voor GID-cache is mislukt"

#: misc-utils/namei.c:439
#, c-format
msgid "%s: exceeded limit of symlinks"
msgstr "%s: limiet op aantal symbolische koppelingen is overschreden"

#: misc-utils/rename.c:67
#, c-format
msgid "%s: not a symbolic link"
msgstr "%s: is geen symbolische koppeling"

#: misc-utils/rename.c:72
#, c-format
msgid "%s: readlink failed"
msgstr "%s: readlink() is mislukt"

#: misc-utils/rename.c:80
#, c-format
msgid "%s: unlink failed"
msgstr "%s: unlink() is mislukt"

#: misc-utils/rename.c:83
#, c-format
msgid "%s: symlinking to %s failed"
msgstr "%s: maken van symbolische koppeling naar %s is mislukt"

#: misc-utils/rename.c:105
#, c-format
msgid "%s: rename to %s failed"
msgstr "%s: hernoemen naar %s is mislukt"

#: misc-utils/rename.c:118
#, c-format
msgid " %s [options] <expression> <replacement> <file>...\n"
msgstr "  %s [opties] <expressie> <vervanging> <bestand>...\n"

#: misc-utils/rename.c:122
msgid "Rename files.\n"
msgstr "Hernoemt bestanden.\n"

#: misc-utils/rename.c:125
msgid " -v, --verbose    explain what is being done\n"
msgstr "  -v, --verbose    tonen wat er gedaan wordt\n"

#: misc-utils/rename.c:126
msgid " -s, --symlink    act on the target of symlinks\n"
msgstr "  -s, --symlink    op doel van een symbolische koppeling werken\n"

#: misc-utils/rename.c:127
#, fuzzy
msgid " -n, --no-act     do not make any changes\n"
msgstr "  -n, --noheadings      geen kopregel tonen\n"

#: misc-utils/uuidd.c:72
msgid "A daemon for generating UUIDs.\n"
msgstr "Een achtergronddienst voor het genereren van UUID's.\n"

#: misc-utils/uuidd.c:74
msgid " -p, --pid <path>        path to pid file\n"
msgstr "  -p, --pid <pad>          pad naar PID-bestand\n"

#: misc-utils/uuidd.c:75
msgid " -s, --socket <path>     path to socket\n"
msgstr "  -s, --socket <pad>       pad naar socket\n"

#: misc-utils/uuidd.c:76
msgid " -T, --timeout <sec>     specify inactivity timeout\n"
msgstr "  -T, --timeout <tijd>     maximale tijd van inactiviteit (in seconden)\n"

#: misc-utils/uuidd.c:77
msgid " -k, --kill              kill running daemon\n"
msgstr "  -k, --kill               een draaiende uuidd-dienst elimineren\n"

#: misc-utils/uuidd.c:78
msgid " -r, --random            test random-based generation\n"
msgstr "  -r, --random             aanmaak van willekeurige UUID's testen\n"

#: misc-utils/uuidd.c:79
msgid " -t, --time              test time-based generation\n"
msgstr "  -t, --time               aanmaak van tijds-UUID's testen\n"

#: misc-utils/uuidd.c:80
msgid " -n, --uuids <num>       request number of uuids\n"
msgstr "  -n, --uuids <aantal>     dit aantal UUID's genereren\n"

#: misc-utils/uuidd.c:81
msgid " -P, --no-pid            do not create pid file\n"
msgstr "  -P, --no-pid             geen PID-bestand aanmaken\n"

#: misc-utils/uuidd.c:82
msgid " -F, --no-fork           do not daemonize using double-fork\n"
msgstr "  -F, --no-fork            niet tot achtergronddienst maken\n"

#: misc-utils/uuidd.c:83
msgid " -S, --socket-activation do not create listening socket\n"
msgstr "  -S, --socket-activation  geen luisterende socket aanmaken\n"

#: misc-utils/uuidd.c:84
msgid " -d, --debug             run in debugging mode\n"
msgstr "  -d, --debug              debugging-meldingen weergeven\n"

#: misc-utils/uuidd.c:85
msgid " -q, --quiet             turn on quiet mode\n"
msgstr "  -q, --quiet              extra informatie onderdrukken\n"

#: misc-utils/uuidd.c:118
msgid "bad arguments"
msgstr "ongeldige argumenten"

#: misc-utils/uuidd.c:125
msgid "socket"
msgstr "socket"

#: misc-utils/uuidd.c:136
msgid "connect"
msgstr "verbinden"

#: misc-utils/uuidd.c:156
msgid "write"
msgstr "schrijven"

#: misc-utils/uuidd.c:164
msgid "read count"
msgstr "gelezen aantal"

#: misc-utils/uuidd.c:170
msgid "bad response length"
msgstr "ongeldige antwoordlengte"

#: misc-utils/uuidd.c:221
#, c-format
msgid "cannot lock %s"
msgstr "kan %s niet vergrendelen"

#: misc-utils/uuidd.c:246
msgid "couldn't create unix stream socket"
msgstr "kan geen UNIX-stream-socket aanmaken"

#: misc-utils/uuidd.c:271
#, c-format
msgid "couldn't bind unix socket %s"
msgstr "kan UNIX-socket %s niet binden"

#: misc-utils/uuidd.c:298
msgid "receiving signal failed"
msgstr "ontvangen van signaal is mislukt"

#: misc-utils/uuidd.c:311
msgid "timed out"
msgstr "duurde te lang"

#: misc-utils/uuidd.c:345 sys-utils/flock.c:269
msgid "cannot set up timer"
msgstr "kan timer niet instellen"

#: misc-utils/uuidd.c:353
#, c-format
msgid "uuidd daemon is already running at pid %s"
msgstr "uuidd-dienst draait al onder PID %s"

#: misc-utils/uuidd.c:362
#, c-format
msgid "couldn't listen on unix socket %s"
msgstr "kan niet luisteren op UNIX-socket %s"

#: misc-utils/uuidd.c:372
#, c-format
msgid "could not truncate file: %s"
msgstr "kan bestand %s niet afkappen"

#: misc-utils/uuidd.c:386
msgid "sd_listen_fds() failed"
msgstr "sd_listen_fds() is mislukt"

#: misc-utils/uuidd.c:389
msgid "no file descriptors received, check systemctl status uuidd.socket"
msgstr "geen bestandsdescriptors ontvangen; controleer systemctl status van uuidd.socket"

#: misc-utils/uuidd.c:392
msgid "too many file descriptors received, check uuidd.socket"
msgstr "te veel bestandsdescriptors ontvangen; controleer uuidd.socket"

#: misc-utils/uuidd.c:420 term-utils/script.c:460
msgid "poll failed"
msgstr "polsen is mislukt"

#: misc-utils/uuidd.c:425
#, c-format
msgid "timeout [%d sec]\n"
msgstr "duurde te lang [%d seconden]\n"

#: misc-utils/uuidd.c:443 term-utils/setterm.c:900 text-utils/column.c:436
#: text-utils/column.c:449
msgid "read failed"
msgstr "lezen is mislukt"

#: misc-utils/uuidd.c:445
#, c-format
msgid "error reading from client, len = %d"
msgstr "fout tijdens lezen van cliënt; lengte = %d"

#: misc-utils/uuidd.c:454
#, c-format
msgid "operation %d, incoming num = %d\n"
msgstr "bewerking %d, gegeven getal = %d\n"

#: misc-utils/uuidd.c:457
#, c-format
msgid "operation %d\n"
msgstr "bewerking %d\n"

#: misc-utils/uuidd.c:473
#, c-format
msgid "Generated time UUID: %s\n"
msgstr "Gegenereerde tijds-UUID: %s\n"

#: misc-utils/uuidd.c:483
#, c-format
msgid "Generated random UUID: %s\n"
msgstr "Gegenereerde willekeurige UUID: %s\n"

#: misc-utils/uuidd.c:492
#, c-format
msgid "Generated time UUID %s and %d following\n"
msgid_plural "Generated time UUID %s and %d following\n"
msgstr[0] "Gegenereerde tijds-UUID is %s, en %d opvolgende\n"
msgstr[1] "Gegenereerde tijds-UUID is %s, en %d opvolgende\n"

#: misc-utils/uuidd.c:513
#, c-format
msgid "Generated %d UUID:\n"
msgid_plural "Generated %d UUIDs:\n"
msgstr[0] "Er is %d UUID gegenereerd:\n"
msgstr[1] "Er zijn %d UUID's gegenereerd:\n"

#: misc-utils/uuidd.c:527
#, c-format
msgid "Invalid operation %d\n"
msgstr "Ongeldige bewerking %d\n"

#: misc-utils/uuidd.c:539
#, c-format
msgid "Unexpected reply length from server %d"
msgstr "Onverwachte antwoordlengte (%d) van server"

#: misc-utils/uuidd.c:600
msgid "failed to parse --uuids"
msgstr "ontleden van het aantal is mislukt"

#: misc-utils/uuidd.c:617
msgid "uuidd has been built without support for socket activation"
msgstr "'uuidd' is gecompileerd zonder ondersteuning voor socket-activatie"

#: misc-utils/uuidd.c:636
msgid "failed to parse --timeout"
msgstr "ontleden van wachttijdwaarde is mislukt"

#: misc-utils/uuidd.c:653
msgid "Both --socket-activation and --socket specified. Ignoring --socket."
msgstr "Zowel '--socket-activation' als '--socket' is gegeven; '--socket' wordt genegeerd."

#: misc-utils/uuidd.c:660 misc-utils/uuidd.c:688
#, c-format
msgid "error calling uuidd daemon (%s)"
msgstr "fout bij aanroepen van uuidd-dienst (%s)"

#: misc-utils/uuidd.c:661 misc-utils/uuidd.c:689
msgid "unexpected error"
msgstr "onverwachte fout"

#: misc-utils/uuidd.c:669
#, c-format
msgid "%s and %d subsequent UUID\n"
msgid_plural "%s and %d subsequent UUIDs\n"
msgstr[0] "%s en %d opvolgende UUID\n"
msgstr[1] "%s en %d opvolgende UUID's\n"

#: misc-utils/uuidd.c:673
#, c-format
msgid "List of UUIDs:\n"
msgstr "Lijst van UUID's:\n"

#: misc-utils/uuidd.c:705
#, c-format
msgid "couldn't kill uuidd running at pid %d"
msgstr "kan uuidd met PID %d niet elimineren"

#: misc-utils/uuidd.c:710
#, c-format
msgid "Killed uuidd running at pid %d.\n"
msgstr "De uuidd met PID %d is geëlimineerd.\n"

#: misc-utils/uuidgen.c:28
msgid "Create a new UUID value.\n"
msgstr "Maakt een nieuwe UUID aan.\n"

#: misc-utils/uuidgen.c:31
msgid ""
" -r, --random     generate random-based uuid\n"
" -t, --time       generate time-based uuid\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""
"  -r, --random       een totaal willekeurige UUID genereren\n"
"  -t, --time         een op huidige tijd gebaseerde UUID genereren\n"
"  -V, --version      programmaversie tonen en stoppen\n"
"  -h, --help         deze hulptekst tonen en stoppen\n"
"\n"

#: misc-utils/whereis.c:189
#, c-format
msgid " %s [options] [-BMS <dir>... -f] <name>\n"
msgstr "  %s [opties] [-BMS <map>... -f] <naam>\n"

#: misc-utils/whereis.c:192
msgid "Locate the binary, source, and manual-page files for a command.\n"
msgstr "Lokaliseert programmabestand, brontekst, en handleidingen van een opdracht.\n"

#: misc-utils/whereis.c:195
msgid " -b         search only for binaries\n"
msgstr "  -b            alleen naar programma's zoeken\n"

#: misc-utils/whereis.c:196
msgid " -B <dirs>  define binaries lookup path\n"
msgstr "  -B <mappen>   te gebruiken zoekpad voor programma's\n"

#: misc-utils/whereis.c:197
msgid " -m         search only for manuals and infos\n"
msgstr "  -m            alleen naar handleidingen zoeken\n"

#: misc-utils/whereis.c:198
msgid " -M <dirs>  define man and info lookup path\n"
msgstr "  -M <mappen>   te gebruiken zoekpad voor handleidingen ('man' en 'info')\n"

#: misc-utils/whereis.c:199
msgid " -s         search only for sources\n"
msgstr "  -s            alleen naar brontekstbestanden zoeken\n"

#: misc-utils/whereis.c:200
msgid " -S <dirs>  define sources lookup path\n"
msgstr "  -S <mappen>   te gebruiken zoekpad voor brontekstbestanden\n"

#: misc-utils/whereis.c:201
msgid " -f         terminate <dirs> argument list\n"
msgstr "  -f            lijst van <mappen> afsluiten\n"

#: misc-utils/whereis.c:202
msgid " -u         search for unusual entries\n"
msgstr "  -u            ongebruikelijke items tonen\n"

#: misc-utils/whereis.c:203
msgid " -l         output effective lookup paths\n"
msgstr "  -l            effectieve zoekpaden tonen\n"

#: misc-utils/whereis.c:619
msgid "option -f is missing"
msgstr "optie '-f' ontbreekt"

#: misc-utils/wipefs.c:196
msgid "partition table"
msgstr "partitietabel"

#: misc-utils/wipefs.c:269
#, c-format
msgid "error: %s: probing initialization failed"
msgstr "fout: %s: initialisatie van sondering is mislukt"

#: misc-utils/wipefs.c:313
#, c-format
msgid "%s: failed to erase %s magic string at offset 0x%08jx"
msgstr "%s: wissen van %s magische tekenreeks op positie 0x%08jx is mislukt"

#: misc-utils/wipefs.c:319
#, c-format
msgid "%s: %zd byte was erased at offset 0x%08jx (%s): "
msgid_plural "%s: %zd bytes were erased at offset 0x%08jx (%s): "
msgstr[0] ""
"%s: %zd byte is gewist op positie 0x%08jx (%s)\n"
"deze byte was: "
msgstr[1] ""
"%s: %zd bytes zijn gewist vanaf positie 0x%08jx (%s)\n"
"deze bytes waren: "

#: misc-utils/wipefs.c:348
#, c-format
msgid "%s: failed to create a signature backup"
msgstr "%s: het maken van een vingerafdruk-reservekopie is mislukt"

#: misc-utils/wipefs.c:361
#, c-format
msgid "%s: calling ioctl to re-read partition table: %m\n"
msgstr "%s: aanroep van ioctl() om partitietabel opnieuw in te lezen: %m\n"

#: misc-utils/wipefs.c:385
msgid "failed to create a signature backup, $HOME undefined"
msgstr "het maken van een vingerafdruk-reservekopie is mislukt, want $HOME is niet gedefinieerd"

#: misc-utils/wipefs.c:414
#, c-format
msgid "%s: ignoring nested \"%s\" partition table on non-whole disk device"
msgstr "%s: geneste '%s'-partitietabel wordt genegeerd op nietgeheleschijf-apparaat"

#: misc-utils/wipefs.c:431
#, c-format
msgid "%s: offset 0x%jx not found"
msgstr "%s: positie 0x%jx is niet gevonden"

#: misc-utils/wipefs.c:435
msgid "Use the --force option to force erase."
msgstr "Gebruik '--force' om het wissen te forceren."

#: misc-utils/wipefs.c:461
msgid "Wipe signatures from a device.\n"
msgstr "Wist bestandsysteemhandtekeningen van een apparaat.\n"

#: misc-utils/wipefs.c:464
msgid ""
" -a, --all           wipe all magic strings (BE CAREFUL!)\n"
" -b, --backup        create a signature backup in $HOME\n"
" -f, --force         force erasure\n"
" -h, --help          show this help text\n"
" -n, --no-act        do everything except the actual write() call\n"
" -o, --offset <num>  offset to erase, in bytes\n"
" -p, --parsable      print out in parsable instead of printable format\n"
" -q, --quiet         suppress output messages\n"
" -t, --types <list>  limit the set of filesystem, RAIDs or partition tables\n"
" -V, --version       output version information and exit\n"
msgstr ""
"  -a, --all           alle magische tekenreeksen wissen (WEET WAT U DOET!)\n"
"  -b, --backup        reservekopie van vingerafdruk maken in $HOME\n"
"  -f, --force         het wissen afdwingen\n"
"  -h, --help          deze hulptekst tonen\n"
"  -n, --no-act        doen alsof: alles behalve het feitelijke schrijven\n"
"  -o, --offset GETAL  startpositie voor wissen, in bytes\n"
"  -p, --parsable      herbruikbare i.p.v. leesbare uitvoer produceren\n"
"  -q, --quiet         geen uitvoerberichten produceren\n"
"  -t, --types LIJST   alleen deze bestandssystemen, RAIDs of partitietabellen\n"
"  -V, --version       programmaversie tonen en stoppen\n"

# FIXME: lowercase
#: misc-utils/wipefs.c:559
msgid "The --backup option is meaningless in this context"
msgstr "de optie '--backup' is zinloos in deze context"

#: schedutils/chrt.c:135
msgid "Show or change the real-time scheduling attributes of a process.\n"
msgstr "Toont of zet de realtime-scheduling-eigenschappen van een proces.\n"

#: schedutils/chrt.c:137
msgid ""
"Set policy:\n"
" chrt [options] <priority> <command> [<arg>...]\n"
" chrt [options] --pid <priority> <pid>\n"
msgstr ""
"Beleid instellen:\n"
"  chrt [opties] <prioriteit> <opdracht> [<argument>...]\n"
"  chrt [opties] --pid <prioriteit> <PID>\n"

#: schedutils/chrt.c:141
msgid ""
"Get policy:\n"
" chrt [options] -p <pid>\n"
msgstr ""
"Beleid opvragen:\n"
"  chrt [opties] -p <PID>\n"

#: schedutils/chrt.c:145
msgid "Policy options:\n"
msgstr "Beleidsopties:\n"

#: schedutils/chrt.c:146
msgid " -b, --batch          set policy to SCHED_BATCH\n"
msgstr "  -b, --batch          beleid op SCHED_BATCH instellen\n"

#: schedutils/chrt.c:147
msgid " -d, --deadline       set policy to SCHED_DEADLINE\n"
msgstr "  -d, --deadline       beleid op SCHED_DEADLINE instellen\n"

#: schedutils/chrt.c:148
msgid " -f, --fifo           set policy to SCHED_FIFO\n"
msgstr "  -f, --fifo           beleid op SCHED_FIFO instellen\n"

#: schedutils/chrt.c:149
msgid " -i, --idle           set policy to SCHED_IDLE\n"
msgstr "  -i, --idle           beleid op SCHED_IDLE instellen\n"

#: schedutils/chrt.c:150
msgid " -o, --other          set policy to SCHED_OTHER\n"
msgstr "  -o, --other          beleid op SCHED_OTHER instellen\n"

#: schedutils/chrt.c:151
msgid " -r, --rr             set policy to SCHED_RR (default)\n"
msgstr "  -r, --rr             beleid op SCHED_RR instellen (standaard)\n"

#: schedutils/chrt.c:154
msgid "Scheduling options:\n"
msgstr "Schedulingopties:\n"

#: schedutils/chrt.c:155
msgid " -R, --reset-on-fork       set SCHED_RESET_ON_FORK for FIFO or RR\n"
msgstr "  -R, --reset-on-fork          SCHED_RESET_ON_FORK instellen voor FIFO of RR\n"

#: schedutils/chrt.c:156
msgid " -T, --sched-runtime <ns>  runtime parameter for DEADLINE\n"
msgstr "  -T, --sched-runtime <ns>     runtime-parameter voor DEADLINE\n"

#: schedutils/chrt.c:157
msgid " -P, --sched-period <ns>   period parameter for DEADLINE\n"
msgstr "  -P, --sched-period <ns>      periode-parameter for DEADLINE\n"

#: schedutils/chrt.c:158
msgid " -D, --sched-deadline <ns> deadline parameter for DEADLINE\n"
msgstr "  -D, --sched-deadline <ns>    deadline-parameter for DEADLINE\n"

#: schedutils/chrt.c:161
msgid "Other options:\n"
msgstr "Andere opties:\n"

#: schedutils/chrt.c:162
msgid " -a, --all-tasks      operate on all the tasks (threads) for a given pid\n"
msgstr "  -a, --all-tasks      alle taken/threads van de gegeven PID aanpakken\n"

#: schedutils/chrt.c:163
msgid " -m, --max            show min and max valid priorities\n"
msgstr "  -m, --max            minimum en maximum geldige prioriteiten tonen\n"

#: schedutils/chrt.c:164
msgid " -p, --pid            operate on existing given pid\n"
msgstr "  -p, --pid            de gegeven, bestaande PID beïnvloeden\n"

#: schedutils/chrt.c:165
msgid " -v, --verbose        display status information\n"
msgstr "  -v, --verbose        statusinformatie tonen\n"

#: schedutils/chrt.c:232 schedutils/chrt.c:254
#, c-format
msgid "failed to get pid %d's policy"
msgstr "opvragen van beleid voor PID %d is mislukt"

#: schedutils/chrt.c:257
#, c-format
msgid "failed to get pid %d's attributes"
msgstr "opvragen van eigenschappen voor PID %d is mislukt"

#: schedutils/chrt.c:267
#, c-format
msgid "pid %d's new scheduling policy: %s"
msgstr "Nieuw scheduling-beleid voor PID %d: %s"

#: schedutils/chrt.c:269
#, c-format
msgid "pid %d's current scheduling policy: %s"
msgstr "Huidig scheduling-beleid voor PID %d: %s"

#: schedutils/chrt.c:276
#, c-format
msgid "pid %d's new scheduling priority: %d\n"
msgstr "Nieuwe scheduling-prioriteit van PID %d: %d\n"

#: schedutils/chrt.c:278
#, c-format
msgid "pid %d's current scheduling priority: %d\n"
msgstr "Huidige scheduling-prioriteit van PID %d: %d\n"

#: schedutils/chrt.c:283
#, c-format
msgid "pid %d's new runtime/deadline/period parameters: %ju/%ju/%ju\n"
msgstr "Nieuwe runtime-/deadline/periode-parameters van PID %d: %ju/%ju/%ju\n"

#: schedutils/chrt.c:286
#, c-format
msgid "pid %d's current runtime/deadline/period parameters: %ju/%ju/%ju\n"
msgstr "Huidige runtime-/deadline/periode-parameters van PID %d: %ju/%ju/%ju\n"

#: schedutils/chrt.c:300 schedutils/chrt.c:396
msgid "cannot obtain the list of tasks"
msgstr "kan geen lijst met taken verkrijgen"

#: schedutils/chrt.c:334
#, c-format
msgid "%s min/max priority\t: %d/%d\n"
msgstr "%s minimum/maximum prioriteit:\t %d/%d\n"

#: schedutils/chrt.c:337
#, c-format
msgid "%s not supported?\n"
msgstr "%s wordt niet ondersteund?\n"

#: schedutils/chrt.c:400
#, c-format
msgid "failed to set tid %d's policy"
msgstr "instellen van beleid voor TID %d is mislukt"

#: schedutils/chrt.c:405
#, c-format
msgid "failed to set pid %d's policy"
msgstr "instellen van beleid voor PID %d is mislukt"

#: schedutils/chrt.c:485
msgid "invalid runtime argument"
msgstr "ongeldig runtime-argument"

#: schedutils/chrt.c:488
msgid "invalid period argument"
msgstr "ongeldig periode-argument"

#: schedutils/chrt.c:491
msgid "invalid deadline argument"
msgstr "ongeldig deadline-argument"

#: schedutils/chrt.c:514
msgid "invalid priority argument"
msgstr "ongeldig prioriteitsargument"

#: schedutils/chrt.c:518
msgid "--reset-on-fork option is supported for SCHED_FIFO and SCHED_RR policies only"
msgstr "optie '--reset-on-fork' wordt alleen voor SCHED_FIFO en SCHED_RR ondersteund"

#: schedutils/chrt.c:523
msgid "--sched-{runtime,deadline,period} options are supported for SCHED_DEADLINE only"
msgstr "opties '--sched-{runtime,deadline,period}' worden alleen voor SCHED_DEADLINE ondersteund"

#: schedutils/chrt.c:538
msgid "SCHED_DEADLINE is unsupported"
msgstr "SCHED_DEADLINE wordt niet ondersteund"

#: schedutils/chrt.c:545
#, c-format
msgid "unsupported priority value for the policy: %d: see --max for valid range"
msgstr "ongeldige prioriteitswaarde (%d) voor beleid; zie '--max' voor geldig bereik"

#: schedutils/ionice.c:76
msgid "ioprio_get failed"
msgstr "ioprio_get() is mislukt"

#: schedutils/ionice.c:85
#, c-format
msgid "%s: prio %lu\n"
msgstr "%s: prioriteit %lu\n"

#: schedutils/ionice.c:98
msgid "ioprio_set failed"
msgstr "ioprio_set() is mislukt"

#: schedutils/ionice.c:104
#, c-format
msgid ""
" %1$s [options] -p <pid>...\n"
" %1$s [options] -P <pgid>...\n"
" %1$s [options] -u <uid>...\n"
" %1$s [options] <command>\n"
msgstr ""
" %1$s [opties] -p <PID>...\n"
" %1$s [opties] -P <PGID>...\n"
" %1$s [opties] -u <UID>...\n"
" %1$s [opties] <opdracht>\n"

#: schedutils/ionice.c:110
msgid "Show or change the I/O-scheduling class and priority of a process.\n"
msgstr "Toont of zet de invoer/uitvoer-scheduling-klasse en -prioriteit van processen.\n"

#: schedutils/ionice.c:113
msgid ""
" -c, --class <class>    name or number of scheduling class,\n"
"                          0: none, 1: realtime, 2: best-effort, 3: idle\n"
msgstr ""
"  -c, --class <klasse>   naam of nummer van scheduling-klasse,\n"
"                           0: none, 1: realtime, 2: best-effort, 3: idle\n"

#: schedutils/ionice.c:115
msgid ""
" -n, --classdata <num>  priority (0..7) in the specified scheduling class,\n"
"                          only for the realtime and best-effort classes\n"
msgstr ""
"  -n, --classdata <getal>  prioriteit (0..7) in de opgegeven scheduling-klasse;\n"
"                             enkel voor de klassen 'realtime' en 'best-effort'\n"

#: schedutils/ionice.c:117
msgid " -p, --pid <pid>...     act on these already running processes\n"
msgstr "  -p, --pid <PID>...     werken op deze al draaiende processen\n"

#: schedutils/ionice.c:118
msgid " -P, --pgid <pgrp>...   act on already running processes in these groups\n"
msgstr "  -P, --pgid <PGID>...   werken op draaiende processen in deze procesgroepen\n"

#: schedutils/ionice.c:119
msgid " -t, --ignore           ignore failures\n"
msgstr "  -t, --ignore           mislukkingen negeren\n"

#: schedutils/ionice.c:120
msgid " -u, --uid <uid>...     act on already running processes owned by these users\n"
msgstr "  -u, --uid <UID>...     werken op draaiende processen van deze gebruikers\n"

#: schedutils/ionice.c:157
msgid "invalid class data argument"
msgstr "ongeldig klassegegevens-argument"

#: schedutils/ionice.c:163
msgid "invalid class argument"
msgstr "ongeldig klasse-argument"

#: schedutils/ionice.c:168
#, c-format
msgid "unknown scheduling class: '%s'"
msgstr "onbekende scheduling-klasse: '%s'"

#: schedutils/ionice.c:176 schedutils/ionice.c:184 schedutils/ionice.c:192
msgid "can handle only one of pid, pgid or uid at once"
msgstr "kan slechts één van PID, PGID of UID tegelijk aan"

#: schedutils/ionice.c:185
msgid "invalid PGID argument"
msgstr "ongeldig PGID-argument"

#: schedutils/ionice.c:193
msgid "invalid UID argument"
msgstr "ongeldig UID-argument"

#: schedutils/ionice.c:212
msgid "ignoring given class data for none class"
msgstr "klassegegevens voor 'none'-klasse worden genegeerd"

#: schedutils/ionice.c:220
msgid "ignoring given class data for idle class"
msgstr "klassegegevens voor 'idle'-klasse worden genegeerd"

#: schedutils/ionice.c:225
#, c-format
msgid "unknown prio class %d"
msgstr "onbekende prioriteitsklasse %d"

#: schedutils/taskset.c:51
#, c-format
msgid ""
"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
"\n"
msgstr ""
"Gebruik:  %s [opties] [masker|CPU-lijst] [PID|opdracht [argument...]]\n"
"\n"

#: schedutils/taskset.c:55
msgid "Show or change the CPU affinity of a process.\n"
msgstr ""
"Toont of wijzigt de processoraffiniteit van een proces,\n"
"of start een nieuw proces met de gegeven affiniteit.\n"

#: schedutils/taskset.c:59
#, c-format
msgid ""
"Options:\n"
" -a, --all-tasks         operate on all the tasks (threads) for a given pid\n"
" -p, --pid               operate on existing given pid\n"
" -c, --cpu-list          display and specify cpus in list format\n"
" -h, --help              display this help\n"
" -V, --version           output version information\n"
"\n"
msgstr ""
"Opties:\n"
"  -a, --all-tasks   alle taken/threads van de gegeven PID beïnvloeden\n"
"  -p, --pid         de gegeven bestaande PID beïnvloeden\n"
"  -c, --cpu-list    de te gebruiken processoren (gegeven als lijst)\n"
"  -h, --help        deze hulptekst tonen\n"
"  -V, --version     programmaversie tonen\n"
"\n"

#: schedutils/taskset.c:67
#, c-format
msgid ""
"The default behavior is to run a new command:\n"
"    %1$s 03 sshd -b 1024\n"
"You can retrieve the mask of an existing task:\n"
"    %1$s -p 700\n"
"Or set it:\n"
"    %1$s -p 03 700\n"
"List format uses a comma-separated list instead of a mask:\n"
"    %1$s -pc 0,3,7-11 700\n"
"Ranges in list format can take a stride argument:\n"
"    e.g. 0-31:2 is equivalent to mask 0x55555555\n"
msgstr ""
"Standaard wordt een nieuw proces gestart, bijvoorbeeld:\n"
"    %1$s 03 sshd -b 1024\n"
"U kunt het masker van een bestaand proces opvragen:\n"
"    %1$s -p 700\n"
"Of instellen:\n"
"    %1$s -p 03 700\n"
"In plaats van een masker is een kommagescheiden lijst mogelijk:\n"
"    %1$s -pc 0,3,7-11 700\n"
"In een lijst kan op een bereik een stapargument volgen:\n"
"    0-31:2 is bijvoorbeeld hetzelfde als masker 0x55555555\n"

#: schedutils/taskset.c:90
#, c-format
msgid "pid %d's new affinity list: %s\n"
msgstr "Nieuwe affiniteitslijst van PID %d: %s\n"

#: schedutils/taskset.c:91
#, c-format
msgid "pid %d's current affinity list: %s\n"
msgstr "Huidige affiniteitslijst van PID %d: %s\n"

#: schedutils/taskset.c:94
#, c-format
msgid "pid %d's new affinity mask: %s\n"
msgstr "Nieuw affiniteitsmasker van PID %d: %s\n"

#: schedutils/taskset.c:95
#, c-format
msgid "pid %d's current affinity mask: %s\n"
msgstr "Huidig affiniteitsmasker van PID %d: %s\n"

#: schedutils/taskset.c:99
msgid "internal error: conversion from cpuset to string failed"
msgstr "**interne programmafout**: omzetten van CPU-set naar tekenreeks is mislukt"

#: schedutils/taskset.c:108
#, c-format
msgid "failed to set pid %d's affinity"
msgstr "instellen van affiniteit van PID %d is mislukt"

#: schedutils/taskset.c:109
#, c-format
msgid "failed to get pid %d's affinity"
msgstr "opvragen van affiniteit van PID %d is mislukt"

#: schedutils/taskset.c:192 sys-utils/chcpu.c:289
msgid "cannot determine NR_CPUS; aborting"
msgstr "kan aantal processoren niet bepalen -- gestopt"

#: schedutils/taskset.c:201 schedutils/taskset.c:214 sys-utils/chcpu.c:295
msgid "cpuset_alloc failed"
msgstr "cpuset_alloc() is mislukt"

#: schedutils/taskset.c:221 sys-utils/chcpu.c:232
#, c-format
msgid "failed to parse CPU list: %s"
msgstr "ontleden van processorenlijst %s is mislukt"

#: schedutils/taskset.c:224
#, c-format
msgid "failed to parse CPU mask: %s"
msgstr "ontleden van processorenmasker %s is mislukt"

#: sys-utils/blkdiscard.c:69
#, c-format
msgid "%s: Zero-filled %<PRIu64> bytes from the offset %<PRIu64>\n"
msgstr "%s: Er zijn %<PRIu64> bytes met nul gevuld vanaf positie %<PRIu64>.\n"

#: sys-utils/blkdiscard.c:74
#, c-format
msgid "%s: Discarded %<PRIu64> bytes from the offset %<PRIu64>\n"
msgstr "%s: Er zijn %<PRIu64> bytes verworpen vanaf positie %<PRIu64>.\n"

#: sys-utils/blkdiscard.c:87
msgid "Discard the content of sectors on a device.\n"
msgstr "Verwerpt de inhoud van sectoren op een apparaat.\n"

#: sys-utils/blkdiscard.c:90
msgid " -o, --offset <num>  offset in bytes to discard from\n"
msgstr "  -o, --offset <getal>   de positie vanaf waar met verwerpen te beginnen\n"

#: sys-utils/blkdiscard.c:91
msgid " -l, --length <num>  length of bytes to discard from the offset\n"
msgstr "  -l, --length <getal>   het aantal te verwerpen bytes\n"

#: sys-utils/blkdiscard.c:92
msgid " -p, --step <num>    size of the discard iterations within the offset\n"
msgstr "  -p, --step <getal>     grootte van de verwerpingsstappen\n"

#: sys-utils/blkdiscard.c:93
msgid " -s, --secure        perform secure discard\n"
msgstr "  -s, --secure           veilige verwerpingsoperaties uitvoeren\n"

#: sys-utils/blkdiscard.c:94
msgid " -z, --zeroout       zero-fill rather than discard\n"
msgstr "  -z, --zeroout          met nullen vullen in plaats van verwerpen\n"

#: sys-utils/blkdiscard.c:95
msgid " -v, --verbose       print aligned length and offset\n"
msgstr "  -v, --verbose          uitgelijnde lengtes en posities vermelden\n"

#: sys-utils/blkdiscard.c:150 sys-utils/fstrim.c:312 sys-utils/losetup.c:678
#: text-utils/hexdump.c:124
msgid "failed to parse offset"
msgstr "ontleden van positie is mislukt"

#: sys-utils/blkdiscard.c:154
msgid "failed to parse step"
msgstr "ontleden van stapgrootte is mislukt"

#: sys-utils/blkdiscard.c:171 sys-utils/blkzone.c:394 sys-utils/zramctl.c:686
#: sys-utils/zramctl.c:712
msgid "no device specified"
msgstr "geen apparaat gegeven"

#: sys-utils/blkdiscard.c:176 sys-utils/blkzone.c:398 sys-utils/fallocate.c:382
#: sys-utils/fsfreeze.c:111 sys-utils/fstrim.c:334
msgid "unexpected number of arguments"
msgstr "onverwacht aantal argumenten"

#: sys-utils/blkdiscard.c:190
#, c-format
msgid "%s: BLKGETSIZE64 ioctl failed"
msgstr "%s: ioctl(BLKGETSIZE64) is mislukt"

#: sys-utils/blkdiscard.c:192 sys-utils/blkzone.c:107
#, c-format
msgid "%s: BLKSSZGET ioctl failed"
msgstr "%s: ioctl(BLKSSZGET) is mislukt"

#: sys-utils/blkdiscard.c:196
#, c-format
msgid "%s: offset %<PRIu64> is not aligned to sector size %i"
msgstr "%s: positie %<PRIu64> is niet uitgelijnd met sectorgrootte %i"

#: sys-utils/blkdiscard.c:201 sys-utils/blkzone.c:173 sys-utils/blkzone.c:261
#, c-format
msgid "%s: offset is greater than device size"
msgstr "%s: positie is groter dan apparaatgrootte"

#: sys-utils/blkdiscard.c:210
#, c-format
msgid "%s: length %<PRIu64> is not aligned to sector size %i"
msgstr "%s: lengte %<PRIu64> is niet uitgelijnd met sectorgrootte %i"

#: sys-utils/blkdiscard.c:223
#, c-format
msgid "%s: BLKZEROOUT ioctl failed"
msgstr "%s: ioctl(BLKZEROOUT) is mislukt"

#: sys-utils/blkdiscard.c:227
#, c-format
msgid "%s: BLKSECDISCARD ioctl failed"
msgstr "%s: ioctl(BLKSECDISCARD) is mislukt"

#: sys-utils/blkdiscard.c:231
#, c-format
msgid "%s: BLKDISCARD ioctl failed"
msgstr "%s: ioctl(BLKDISCARD) is mislukt"

#: sys-utils/blkzone.c:73
#, fuzzy
msgid "Report zone information about the given device"
msgstr "Toont informatie over blok-apparaten.\n"

#: sys-utils/blkzone.c:74
msgid "Reset a range of zones."
msgstr ""

#: sys-utils/blkzone.c:104
#, fuzzy, c-format
msgid "%s: blkdev_get_sectors ioctl failed"
msgstr "%s: instellen van direct-IO is mislukt"

#: sys-utils/blkzone.c:177 sys-utils/blkzone.c:251
#, fuzzy, c-format
msgid "%s: unable to determine zone size"
msgstr "%s: schrijven van zone-kaart is mislukt"

#: sys-utils/blkzone.c:195
#, fuzzy, c-format
msgid "%s: BLKREPORTZONE ioctl failed"
msgstr "%s: ioctl(BLKGETSIZE64) is mislukt"

#: sys-utils/blkzone.c:198
#, c-format
msgid "Found %d zones from 0x%<PRIx64>\n"
msgstr ""

#: sys-utils/blkzone.c:219
#, c-format
msgid "  start: 0x%09<PRIx64>, len 0x%06<PRIx64>, wptr 0x%06<PRIx64> reset:%u non-seq:%u, zcond:%2u(%s) [type: %u(%s)]\n"
msgstr ""

#: sys-utils/blkzone.c:256
#, fuzzy, c-format
msgid "%s: offset %<PRIu64> is not aligned to zone size %lu"
msgstr "%s: positie %<PRIu64> is niet uitgelijnd met sectorgrootte %i"

#: sys-utils/blkzone.c:275
#, fuzzy, c-format
msgid "%s: number of sectors %<PRIu64> is not aligned to zone size %lu"
msgstr "%s: positie %<PRIu64> is niet uitgelijnd met sectorgrootte %i"

#: sys-utils/blkzone.c:283
#, fuzzy, c-format
msgid "%s: BLKRESETZONE ioctl failed"
msgstr "%s: ioctl(BLKSSZGET) is mislukt"

#: sys-utils/blkzone.c:285
#, fuzzy, c-format
msgid "%s: successfully reset in range from %<PRIu64>, to %<PRIu64>"
msgstr "Partitietabellengte is gewijzigd van %<PRIu32> naar %<PRIu64>."

#: sys-utils/blkzone.c:298
#, fuzzy, c-format
msgid " %s <command> [options] <device>\n"
msgstr "  %s [opties] <apparaat>\n"

#: sys-utils/blkzone.c:301
msgid "Run zone command on the given block device.\n"
msgstr ""

#: sys-utils/blkzone.c:308
#, fuzzy
msgid " -o, --offset <sector>  start sector of zone to act (in 512-byte sectors)\n"
msgstr "  -o, --offset <getal>   op deze positie in het bestand beginnen, in bytes\n"

#: sys-utils/blkzone.c:309
msgid " -l, --length <sectors> maximum sectors to act (in 512-byte sectors)\n"
msgstr ""

#: sys-utils/blkzone.c:310
#, fuzzy
msgid " -c, --count <number>   maximum number of zones\n"
msgstr "  -t, --streams <getal>    het aantal te gebruiken compressiestreams\n"

#: sys-utils/blkzone.c:311
#, fuzzy
msgid " -v, --verbose          display more details\n"
msgstr "      --verbose          gedetailleerde uitvoer produceren\n"

#: sys-utils/blkzone.c:354
#, fuzzy, c-format
msgid "%s is not valid command name"
msgstr "%s is geen geldig blok-apparaat"

#: sys-utils/blkzone.c:369
#, fuzzy
msgid "failed to parse number of zones"
msgstr "ontleden van regelaantal is mislukt"

#: sys-utils/blkzone.c:373
#, fuzzy
msgid "failed to parse number of sectors"
msgstr "ontleden van regelaantal is mislukt"

#: sys-utils/blkzone.c:377
#, fuzzy
msgid "failed to parse zone offset"
msgstr "ontleden van positie is mislukt"

#: sys-utils/blkzone.c:391
#, fuzzy
msgid "no command specified"
msgstr "geen commando gegeven"

#: sys-utils/chcpu.c:87 sys-utils/chcpu.c:179
#, c-format
msgid "CPU %u does not exist"
msgstr "CPU %u bestaat niet"

#: sys-utils/chcpu.c:92
#, c-format
msgid "CPU %u is not hot pluggable"
msgstr "CPU %u is niet hotplug-baar"

#: sys-utils/chcpu.c:98
#, c-format
msgid "CPU %u is already enabled\n"
msgstr "CPU %u is al ingeschakeld\n"

#: sys-utils/chcpu.c:102
#, c-format
msgid "CPU %u is already disabled\n"
msgstr "CPU %u is al uitgeschakeld\n"

#: sys-utils/chcpu.c:110
#, c-format
msgid "CPU %u enable failed (CPU is deconfigured)"
msgstr "Inschakelen van CPU %u is mislukt (CPU is gedeconfigureerd)"

#: sys-utils/chcpu.c:113
#, c-format
msgid "CPU %u enable failed"
msgstr "Inschakelen van CPU %u is mislukt"

#: sys-utils/chcpu.c:116
#, c-format
msgid "CPU %u enabled\n"
msgstr "CPU %u is ingeschakeld\n"

#: sys-utils/chcpu.c:119
#, c-format
msgid "CPU %u disable failed (last enabled CPU)"
msgstr "Uitschakelen van CPU %u is mislukt (is de enige ingeschakelde CPU)"

#: sys-utils/chcpu.c:125
#, c-format
msgid "CPU %u disable failed"
msgstr "Uitschakelen van CPU %u is mislukt"

#: sys-utils/chcpu.c:128
#, c-format
msgid "CPU %u disabled\n"
msgstr "CPU %u is uitgeschakeld\n"

#: sys-utils/chcpu.c:141
msgid "This system does not support rescanning of CPUs"
msgstr "Dit systeem ondersteunt het herscannen van CPU's niet"

#: sys-utils/chcpu.c:143
msgid "Failed to trigger rescan of CPUs"
msgstr "Starten van een herscan van CPU's is mislukt"

#: sys-utils/chcpu.c:144
#, c-format
msgid "Triggered rescan of CPUs\n"
msgstr "Herscan van CPU's is gestart\n"

#: sys-utils/chcpu.c:151
msgid "This system does not support setting the dispatching mode of CPUs"
msgstr "Dit systeem ondersteunt het instellen van de dispatching-modus van CPU's niet"

#: sys-utils/chcpu.c:155
msgid "Failed to set horizontal dispatch mode"
msgstr "Instellen van horizontale dispatching-modus is mislukt"

#: sys-utils/chcpu.c:156
#, c-format
msgid "Successfully set horizontal dispatching mode\n"
msgstr "Horizontale dispatching-modus is met succes ingesteld\n"

#: sys-utils/chcpu.c:159
msgid "Failed to set vertical dispatch mode"
msgstr "Instellen van verticale dispatching-modus is mislukt"

#: sys-utils/chcpu.c:160
#, c-format
msgid "Successfully set vertical dispatching mode\n"
msgstr "Verticale dispatching-modus is met succes ingesteld\n"

#: sys-utils/chcpu.c:184
#, c-format
msgid "CPU %u is not configurable"
msgstr "CPU %u is niet configureerbaar"

#: sys-utils/chcpu.c:190
#, c-format
msgid "CPU %u is already configured\n"
msgstr "CPU %u is al geconfigureerd\n"

#: sys-utils/chcpu.c:194
#, c-format
msgid "CPU %u is already deconfigured\n"
msgstr "CPU %u is al gedeconfigureerd\n"

#: sys-utils/chcpu.c:199
#, c-format
msgid "CPU %u deconfigure failed (CPU is enabled)"
msgstr "Deconfigureren van CPU %u is mislukt (CPU is ingeschakeld)"

#: sys-utils/chcpu.c:206
#, c-format
msgid "CPU %u configure failed"
msgstr "Configureren van CPU %u is mislukt"

#: sys-utils/chcpu.c:209
#, c-format
msgid "CPU %u configured\n"
msgstr "CPU %u is geconfigureerd\n"

#: sys-utils/chcpu.c:213
#, c-format
msgid "CPU %u deconfigure failed"
msgstr "Deconfigureren van CPU %u is mislukt"

#: sys-utils/chcpu.c:216
#, c-format
msgid "CPU %u deconfigured\n"
msgstr "CPU %u is gedeconfigureerd\n"

#: sys-utils/chcpu.c:231
#, c-format
msgid "invalid CPU number in CPU list: %s"
msgstr "ongeldig CPU-nummer in CPU-lijst: %s"

#: sys-utils/chcpu.c:238 text-utils/col.c:130
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr ""
"\n"
"Gebruik:  %s [opties]\n"

#: sys-utils/chcpu.c:242
msgid "Configure CPUs in a multi-processor system.\n"
msgstr "Configureert CPU's op een multiprocessorsysteem.\n"

#: sys-utils/chcpu.c:244
msgid ""
"\n"
"Options:\n"
"  -h, --help                    print this help\n"
"  -e, --enable <cpu-list>       enable cpus\n"
"  -d, --disable <cpu-list>      disable cpus\n"
"  -c, --configure <cpu-list>    configure cpus\n"
"  -g, --deconfigure <cpu-list>  deconfigure cpus\n"
"  -p, --dispatch <mode>         set dispatching mode\n"
"  -r, --rescan                  trigger rescan of cpus\n"
"  -V, --version                 output version information and exit\n"
msgstr ""

#: sys-utils/chcpu.c:326
#, c-format
msgid "unsupported argument: %s"
msgstr "ongeldig argument: %s"

#: sys-utils/chmem.c:67
#, c-format
msgid "Memory Block %<PRIu64> (0x%016<PRIx64>-0x%016<PRIx64>)"
msgstr ""

#: sys-utils/chmem.c:83 sys-utils/chmem.c:129
#, fuzzy
msgid "Failed to parse index"
msgstr "ontleden van ID is mislukt"

#: sys-utils/chmem.c:91
#, fuzzy, c-format
msgid "%s enable failed\n"
msgstr "Inschakelen van CPU %u is mislukt"

#: sys-utils/chmem.c:93
#, fuzzy, c-format
msgid "%s disable failed\n"
msgstr "Uitschakelen van CPU %u is mislukt"

#: sys-utils/chmem.c:96 sys-utils/chmem.c:152
#, fuzzy, c-format
msgid "%s enabled\n"
msgstr "CPU %u is ingeschakeld\n"

#: sys-utils/chmem.c:98 sys-utils/chmem.c:154
#, fuzzy, c-format
msgid "%s disabled\n"
msgstr "CPU %u is uitgeschakeld\n"

#: sys-utils/chmem.c:110
#, c-format
msgid "Could only enable %s of memory"
msgstr ""

#: sys-utils/chmem.c:112
#, c-format
msgid "Could only disable %s of memory"
msgstr ""

#: sys-utils/chmem.c:138
#, fuzzy, c-format
msgid "%s already enabled\n"
msgstr "CPU %u is al ingeschakeld\n"

#: sys-utils/chmem.c:140
#, fuzzy, c-format
msgid "%s already disabled\n"
msgstr "CPU %u is al uitgeschakeld\n"

#: sys-utils/chmem.c:147
#, fuzzy, c-format
msgid "%s enable failed"
msgstr "Inschakelen van CPU %u is mislukt"

#: sys-utils/chmem.c:149
#, fuzzy, c-format
msgid "%s disable failed"
msgstr "Uitschakelen van CPU %u is mislukt"

#: sys-utils/chmem.c:175 sys-utils/lsmem.c:360
#, fuzzy, c-format
msgid "Failed to read %s"
msgstr "lezen van snelheid is mislukt"

#: sys-utils/chmem.c:183
#, fuzzy
msgid "Failed to parse block number"
msgstr "ontleden van getal is mislukt"

#: sys-utils/chmem.c:188
#, fuzzy
msgid "Failed to parse size"
msgstr "Ontleden van grootte is mislukt."

#: sys-utils/chmem.c:192
#, c-format
msgid "Size must be aligned to memory block size (%s)"
msgstr ""

#: sys-utils/chmem.c:201
#, fuzzy
msgid "Failed to parse start"
msgstr "ontleden van begin is mislukt"

#: sys-utils/chmem.c:202
#, fuzzy
msgid "Failed to parse end"
msgstr "ontleden van einde is mislukt"

#: sys-utils/chmem.c:206
#, fuzzy, c-format
msgid "Invalid start address format: %s"
msgstr "ongeldig begin"

#: sys-utils/chmem.c:208
#, fuzzy, c-format
msgid "Invalid end address format: %s"
msgstr "ongeldige signaalnaam of -nummer: %s"

#: sys-utils/chmem.c:209
#, fuzzy
msgid "Failed to parse start address"
msgstr "ontleden van begin is mislukt"

#: sys-utils/chmem.c:210
#, fuzzy
msgid "Failed to parse end address"
msgstr "ontleden van einde is mislukt"

#: sys-utils/chmem.c:213
#, c-format
msgid "Start address and (end address + 1) must be aligned to memory block size (%s)"
msgstr ""

#: sys-utils/chmem.c:227
#, fuzzy, c-format
msgid "Invalid parameter: %s"
msgstr "ongeldig argument: %s"

#: sys-utils/chmem.c:234
#, fuzzy, c-format
msgid "Invalid range: %s"
msgstr "ongeldig argument: %s"

#: sys-utils/chmem.c:240
#, fuzzy, c-format
msgid " %s [options] [SIZE|RANGE|BLOCKRANGE]\n"
msgstr "  %s [opties] [ y | n ]\n"

#: sys-utils/chmem.c:243
msgid "Set a particular size or range of memory online or offline.\n"
msgstr ""

#: sys-utils/chmem.c:246
#, fuzzy
msgid " -e, --enable   enable memory\n"
msgstr "  -v, --verbose      gedetailleerde uitvoer produceren\n"

#: sys-utils/chmem.c:247
msgid " -d, --disable  disable memory\n"
msgstr ""

#: sys-utils/chmem.c:248
#, fuzzy
msgid " -b, --blocks   use memory blocks\n"
msgstr "  -v, --verbose      gedetailleerde uitvoer produceren\n"

#: sys-utils/chmem.c:249
#, fuzzy
msgid " -v, --verbose  verbose output\n"
msgstr "  -v, --verbose      gedetailleerde uitvoer produceren\n"

#: sys-utils/ctrlaltdel.c:27
#, c-format
msgid " %s hard|soft\n"
msgstr "  %s hard|soft\n"

#: sys-utils/ctrlaltdel.c:30
#, c-format
msgid "Set the function of the Ctrl-Alt-Del combination.\n"
msgstr "Stelt de functie in van de Ctrl+Alt+Del-toetscombinatie.\n"

#: sys-utils/ctrlaltdel.c:51
msgid "implicit"
msgstr "impliciet"

#: sys-utils/ctrlaltdel.c:52
#, c-format
msgid "unexpected value in %s: %ju"
msgstr "onverwachte waarde in %s: %ju"

#: sys-utils/ctrlaltdel.c:63
msgid "You must be root to set the Ctrl-Alt-Del behavior"
msgstr "U moet root zijn om het gedrag van Ctrl-Alt-Del in te kunnen stellen."

#: sys-utils/ctrlaltdel.c:71 sys-utils/ipcrm.c:392 sys-utils/ipcrm.c:415
#, c-format
msgid "unknown argument: %s"
msgstr "onbekend argument: %s"

#: sys-utils/dmesg.c:110
msgid "system is unusable"
msgstr "systeem is onbruikbaar"

#: sys-utils/dmesg.c:111
msgid "action must be taken immediately"
msgstr "onmiddellijke actie is vereist"

#: sys-utils/dmesg.c:112
msgid "critical conditions"
msgstr "kritieke toestand"

#: sys-utils/dmesg.c:113
msgid "error conditions"
msgstr "fouttoestand"

#: sys-utils/dmesg.c:114
msgid "warning conditions"
msgstr "waarschuwingstoestand"

#: sys-utils/dmesg.c:115
msgid "normal but significant condition"
msgstr "gewone maar significante toestand"

#: sys-utils/dmesg.c:116
msgid "informational"
msgstr "ter informatie"

#: sys-utils/dmesg.c:117
msgid "debug-level messages"
msgstr "debugging-meldingen"

#: sys-utils/dmesg.c:131
msgid "kernel messages"
msgstr "kernelmeldingen"

#: sys-utils/dmesg.c:132
msgid "random user-level messages"
msgstr "willekeurige gebruikersmeldingen"

#: sys-utils/dmesg.c:133
msgid "mail system"
msgstr "postsysteem"

#: sys-utils/dmesg.c:134
msgid "system daemons"
msgstr "systeemdiensten"

#: sys-utils/dmesg.c:135
msgid "security/authorization messages"
msgstr "beveiligings-/autorisatiemeldingen"

#: sys-utils/dmesg.c:136
msgid "messages generated internally by syslogd"
msgstr "interne meldingen van 'syslogd'"

#: sys-utils/dmesg.c:137
msgid "line printer subsystem"
msgstr "regelprinter-subsysteem"

#: sys-utils/dmesg.c:138
msgid "network news subsystem"
msgstr "netwerknieuws-subsysteem"

#: sys-utils/dmesg.c:139
msgid "UUCP subsystem"
msgstr "UUCP-subsysteem"

#: sys-utils/dmesg.c:140
msgid "clock daemon"
msgstr "klokdienst"

#: sys-utils/dmesg.c:141
msgid "security/authorization messages (private)"
msgstr "beveiligings-/autorisatiemeldingen (privé)"

#: sys-utils/dmesg.c:142
msgid "FTP daemon"
msgstr "FTP-dienst"

#: sys-utils/dmesg.c:267
msgid "Display or control the kernel ring buffer.\n"
msgstr "Toont of manipuleert de inhoud van de kernelringbuffer.\n"

#: sys-utils/dmesg.c:270
msgid " -C, --clear                 clear the kernel ring buffer\n"
msgstr "  -C, --clear                 de berichten in de kernelringbuffer wissen\n"

#: sys-utils/dmesg.c:271
msgid " -c, --read-clear            read and clear all messages\n"
msgstr "  -c, --read-clear            alle berichten lezen en dan wissen\n"

#: sys-utils/dmesg.c:272
msgid " -D, --console-off           disable printing messages to console\n"
msgstr "  -D, --console-off           tonen van meldingen op console uitschakelen\n"

#: sys-utils/dmesg.c:273
msgid " -E, --console-on            enable printing messages to console\n"
msgstr "  -E, --console-on            tonen van meldingen op console inschakelen\n"

#: sys-utils/dmesg.c:274
msgid " -F, --file <file>           use the file instead of the kernel log buffer\n"
msgstr "  -F, --file <bestand>        dit bestand gebruiken i.p.v. kernelringbuffer\n"

#: sys-utils/dmesg.c:275
msgid " -f, --facility <list>       restrict output to defined facilities\n"
msgstr "  -f, --facility <lijst>      uitvoer beperken tot de aangegeven faciliteiten\n"

#: sys-utils/dmesg.c:276
msgid " -H, --human                 human readable output\n"
msgstr "  -H, --human                 leesbare uitvoer produceren\n"

#: sys-utils/dmesg.c:277
msgid " -k, --kernel                display kernel messages\n"
msgstr "  -k, --kernel                kernel-berichten tonen\n"

#: sys-utils/dmesg.c:278
msgid " -L, --color[=<when>]        colorize messages (auto, always or never)\n"
msgstr "  -L, --color[=<wanneer>]     berichten kleuren ('always', 'auto', of 'never')\n"

#: sys-utils/dmesg.c:281
msgid " -l, --level <list>          restrict output to defined levels\n"
msgstr "  -l, --level <lijst>         uitvoer beperken tot de aangegeven niveaus\n"

#: sys-utils/dmesg.c:282
msgid " -n, --console-level <level> set level of messages printed to console\n"
msgstr "  -n, --console-level <niveau>  niveau van berichten die op console getoond worden\n"

#: sys-utils/dmesg.c:283
msgid " -P, --nopager               do not pipe output into a pager\n"
msgstr "  -P, --nopager               de uitvoer niet naar een 'pager' sluizen\n"

#: sys-utils/dmesg.c:284
msgid " -r, --raw                   print the raw message buffer\n"
msgstr "  -r, --raw                   de berichtenbuffer in rauwe vorm weergeven\n"

#: sys-utils/dmesg.c:285
msgid " -S, --syslog                force to use syslog(2) rather than /dev/kmsg\n"
msgstr "  -S, --syslog                'syslog(2)' gebruiken in plaats van '/dev/kmsg'\n"

#: sys-utils/dmesg.c:286
msgid " -s, --buffer-size <size>    buffer size to query the kernel ring buffer\n"
msgstr "  -s, --buffer-size <getal>   buffergrootte voor bevragen van kernelringbuffer\n"

#: sys-utils/dmesg.c:287
msgid " -u, --userspace             display userspace messages\n"
msgstr "  -u, --userspace             berichten uit gebruikersruimte weergeven\n"

#: sys-utils/dmesg.c:288
msgid " -w, --follow                wait for new messages\n"
msgstr "  -w, --follow                op nieuwe berichten wachten\n"

#: sys-utils/dmesg.c:289
msgid " -x, --decode                decode facility and level to readable string\n"
msgstr "  -x, --decode                faciliteit en niveau in leesbare tekst omzetten\n"

#: sys-utils/dmesg.c:290
msgid " -d, --show-delta            show time delta between printed messages\n"
msgstr "  -d, --show-delta            tijdsdelta tussen getoonde berichten weergeven\n"

#: sys-utils/dmesg.c:291
msgid " -e, --reltime               show local time and time delta in readable format\n"
msgstr "  -e, --reltime               lokale tijd en tijdsdelta in leesbare vorm tonen\n"

#: sys-utils/dmesg.c:292
msgid " -T, --ctime                 show human-readable timestamp (may be inaccurate!)\n"
msgstr ""
"  -T, --ctime                 een leesbaar tijdsstempel produceren\n"
"                                (dit kan onnauwkeurig zijn)\n"

#: sys-utils/dmesg.c:293
msgid " -t, --notime                don't show any timestamp with messages\n"
msgstr "  -t, --notime                geen tijdsstempel weergeven bij berichten\n"

#: sys-utils/dmesg.c:294
msgid ""
"     --time-format <format>  show timestamp using the given format:\n"
"                               [delta|reltime|ctime|notime|iso]\n"
"Suspending/resume will make ctime and iso timestamps inaccurate.\n"
msgstr ""
"      --time-format <soort>    tijdsstempels tonen van deze <soort>:\n"
"                                 'delta', 'reltime', 'ctime', 'iso', 'notime'\n"
"\n"
"Slapen/hervatten maakt 'ctime' en 'iso' onnauwkeurig.\n"

#: sys-utils/dmesg.c:300
msgid ""
"\n"
"Supported log facilities:\n"
msgstr ""
"\n"
"Ondersteunde log-faciliteiten:\n"

#: sys-utils/dmesg.c:306
msgid ""
"\n"
"Supported log levels (priorities):\n"
msgstr ""
"\n"
"Ondersteunde log-niveaus (prioriteiten):\n"

#: sys-utils/dmesg.c:360
#, c-format
msgid "failed to parse level '%s'"
msgstr "ontleden van niveau '%s' is mislukt"

#: sys-utils/dmesg.c:362
#, c-format
msgid "unknown level '%s'"
msgstr "onbekend niveau '%s'"

#: sys-utils/dmesg.c:398
#, c-format
msgid "failed to parse facility '%s'"
msgstr "ontleden van faciliteit '%s' is mislukt"

#: sys-utils/dmesg.c:400
#, c-format
msgid "unknown facility '%s'"
msgstr "onbekende faciliteit '%s'"

#: sys-utils/dmesg.c:528
#, c-format
msgid "cannot mmap: %s"
msgstr "kan bestand %s niet geheel in het geheugen plaatsen"

#: sys-utils/dmesg.c:1356
msgid "invalid buffer size argument"
msgstr "ongeldige buffergrootte"

#: sys-utils/dmesg.c:1408
msgid "--show-delta is ignored when used together with iso8601 time format"
msgstr "optie '--show-delta' wordt genegeerd wanneer samen gebruikt met ISO8601-tijdopmaak"

# FIXME: grammar
#: sys-utils/dmesg.c:1431
msgid "--raw can be used together with --level or --facility only when reading messages from /dev/kmsg"
msgstr "optie '--raw' gaat alleen samen met '--level' of '--facility' wanneer de berichten uit /dev/kmsg gelezen worden"

#: sys-utils/dmesg.c:1441
msgid "read kernel buffer failed"
msgstr "lezen van kernelbuffer is mislukt"

#: sys-utils/dmesg.c:1460
msgid "klogctl failed"
msgstr "klogctl() is mislukt"

#: sys-utils/eject.c:134
#, c-format
msgid " %s [options] [<device>|<mountpoint>]\n"
msgstr "  %s [opties] [<apparaat>|<aankoppelingspunt>]\n"

#: sys-utils/eject.c:137
msgid "Eject removable media.\n"
msgstr "Werpt verwijderbare media uit.\n"

#: sys-utils/eject.c:140
msgid ""
" -a, --auto <on|off>         turn auto-eject feature on or off\n"
" -c, --changerslot <slot>    switch discs on a CD-ROM changer\n"
" -d, --default               display default device\n"
" -f, --floppy                eject floppy\n"
" -F, --force                 don't care about device type\n"
" -i, --manualeject <on|off>  toggle manual eject protection on/off\n"
" -m, --no-unmount            do not unmount device even if it is mounted\n"
" -M, --no-partitions-unmount do not unmount another partitions\n"
" -n, --noop                  don't eject, just show device found\n"
" -p, --proc                  use /proc/mounts instead of /etc/mtab\n"
" -q, --tape                  eject tape\n"
" -r, --cdrom                 eject CD-ROM\n"
" -s, --scsi                  eject SCSI device\n"
" -t, --trayclose             close tray\n"
" -T, --traytoggle            toggle tray\n"
" -v, --verbose               enable verbose output\n"
" -x, --cdspeed <speed>       set CD-ROM max speed\n"
" -X, --listspeed             list CD-ROM available speeds\n"
msgstr ""

#: sys-utils/eject.c:164
msgid ""
"\n"
"By default tries -r, -s, -f, and -q in order until success.\n"
msgstr ""
"\n"
"Standaard worden '-r', '-s', '-f', en dan '-q' geprobeerd tot het gelukt is.\n"

#: sys-utils/eject.c:210
msgid "invalid argument to --changerslot/-c option"
msgstr "ongeldig argument van optie '--changerslot' (-c)"

#: sys-utils/eject.c:214
msgid "invalid argument to --cdspeed/-x option"
msgstr "ongeldig argument van optie '--cdspeed' (-x)"

#: sys-utils/eject.c:325
msgid "CD-ROM auto-eject command failed"
msgstr "CD-ROM-automatischuitwerpcommando is mislukt"

#: sys-utils/eject.c:339
msgid "CD-ROM door lock is not supported"
msgstr "CD-ROM-deurvergrendeling wordt niet ondersteund"

#: sys-utils/eject.c:341
msgid "other users have the drive open and not CAP_SYS_ADMIN"
msgstr "andere gebruikers hebben het apparaat open en geen CAP_SYS_ADMIN"

#: sys-utils/eject.c:343
msgid "CD-ROM lock door command failed"
msgstr "CD-ROM-deurvergrendelingscommando is mislukt"

#: sys-utils/eject.c:348
msgid "CD-Drive may NOT be ejected with device button"
msgstr "CD-ROM kan NIET uitgeworpen worden met apparaatknop"

#: sys-utils/eject.c:350
msgid "CD-Drive may be ejected with device button"
msgstr "CD-ROM kan uitgeworpen worden met apparaatknop"

#: sys-utils/eject.c:361
msgid "CD-ROM select disc command failed"
msgstr "CD-ROM-schijfkeuzecommando is mislukt"

#: sys-utils/eject.c:365
msgid "CD-ROM load from slot command failed"
msgstr "CD-ROM-commando voor laden uit vak is mislukt"

#: sys-utils/eject.c:367
msgid "IDE/ATAPI CD-ROM changer not supported by this kernel\n"
msgstr "IDE/ATAPI CD-ROM-wisselaar wordt niet ondersteund door deze kernel\n"

#: sys-utils/eject.c:385
msgid "CD-ROM tray close command failed"
msgstr "CD-ROM-ladesluitcommando is mislukt"

#: sys-utils/eject.c:387
msgid "CD-ROM tray close command not supported by this kernel\n"
msgstr "CD-ROM-ladesluitcommando wordt niet ondersteund door deze kernel\n"

#: sys-utils/eject.c:404
msgid "CD-ROM eject unsupported"
msgstr "Uitwerpen van CD-ROM wordt niet ondersteund"

#: sys-utils/eject.c:432 sys-utils/eject.c:455 sys-utils/eject.c:1010
msgid "CD-ROM eject command failed"
msgstr "CD-ROM-uitwerpcommando is mislukt"

#: sys-utils/eject.c:435
msgid "no CD-ROM information available"
msgstr "geen CD-ROM-informatie beschikbaar"

#: sys-utils/eject.c:438
msgid "CD-ROM drive is not ready"
msgstr "CD-ROM-apparaat is niet gereed"

#: sys-utils/eject.c:481
msgid "CD-ROM select speed command failed"
msgstr "CD-ROM-snelheidskeuzecommando is mislukt"

#: sys-utils/eject.c:483 sys-utils/eject.c:569
msgid "CD-ROM select speed command not supported by this kernel"
msgstr "CD-ROM-snelheidskeuzecommando wordt niet ondersteund door deze kernel"

#: sys-utils/eject.c:520
#, c-format
msgid "%s: failed to finding CD-ROM name"
msgstr "%s: verkrijgen van CD-ROM-naam is mislukt"

#: sys-utils/eject.c:535
#, c-format
msgid "%s: failed to read speed"
msgstr "%s: lezen van snelheid is mislukt"

#: sys-utils/eject.c:543
msgid "failed to read speed"
msgstr "lezen van snelheid is mislukt"

#: sys-utils/eject.c:587
msgid "not an sg device, or old sg driver"
msgstr "is geen SG-apparaat, of een oud SG-stuurprogramma"

#: sys-utils/eject.c:659
#, c-format
msgid "%s: unmounting"
msgstr "%s: afkoppelen"

# FIXME: backtick
#: sys-utils/eject.c:674
#, c-format
msgid "unable to exec /bin/umount of `%s'"
msgstr "kan '/bin/umount' van '%s' niet uitvoeren"

#: sys-utils/eject.c:677
msgid "unable to fork"
msgstr "kan geen nieuw proces starten"

# FIXME: backtick
#: sys-utils/eject.c:684
#, c-format
msgid "unmount of `%s' did not exit normally"
msgstr "afkoppeling van '%s' is niet normaal afgesloten"

# FIXME: backtick
#: sys-utils/eject.c:687
#, c-format
msgid "unmount of `%s' failed\n"
msgstr "afkoppelen van '%s' is mislukt\n"

#: sys-utils/eject.c:729
msgid "failed to parse mount table"
msgstr "ontleden van aankoppelingstabel is mislukt"

#: sys-utils/eject.c:790 sys-utils/eject.c:891
#, c-format
msgid "%s: mounted on %s"
msgstr "%s: is aangekoppeld op %s"

#: sys-utils/eject.c:832
msgid "setting CD-ROM speed to auto"
msgstr "CD-ROM-snelheid wordt ingesteld op 'auto'"

#: sys-utils/eject.c:834
#, c-format
msgid "setting CD-ROM speed to %ldX"
msgstr "CD-ROM-snelheid wordt ingesteld op %ldX"

# FIXME: backtick
#: sys-utils/eject.c:860
#, c-format
msgid "default device: `%s'"
msgstr "standaardapparaat: '%s'"

# FIXME: backtick
#: sys-utils/eject.c:866
#, c-format
msgid "using default device `%s'"
msgstr "standaardapparaat '%s' wordt gebruikt"

#: sys-utils/eject.c:885 sys-utils/rtcwake.c:376
#, c-format
msgid "%s: unable to find device"
msgstr "%s: kan apparaat niet vinden"

# FIXME: backtick
#: sys-utils/eject.c:887
#, c-format
msgid "device name is `%s'"
msgstr "apparaatnaam is '%s'"

#: sys-utils/eject.c:893 sys-utils/umount.c:305 sys-utils/umount.c:328
#, c-format
msgid "%s: not mounted"
msgstr "%s is niet aangekoppeld"

#: sys-utils/eject.c:897
#, c-format
msgid "%s: disc device: %s (disk device will be used for eject)"
msgstr "%s: blok-apparaat: %s (deze zal gebruikt worden voor uitwerping)"

#: sys-utils/eject.c:905
#, c-format
msgid "%s: not found mountpoint or device with the given name"
msgstr "%s: geen apparaat of aankoppelingspunt gevonden met de gegeven naam"

#: sys-utils/eject.c:908
#, c-format
msgid "%s: is whole-disk device"
msgstr "%s is het gehele-schijf-apparaat"

#: sys-utils/eject.c:912
#, c-format
msgid "%s: is not hot-pluggable device"
msgstr "%s: is geen hotplug-baar apparaat"

# FIXME: backtick
#: sys-utils/eject.c:916
#, c-format
msgid "device is `%s'"
msgstr "apparaat is '%s'"

#: sys-utils/eject.c:917
msgid "exiting due to -n/--noop option"
msgstr "afsluiting wegens optie '--noop' (-n)"

#: sys-utils/eject.c:931
#, c-format
msgid "%s: enabling auto-eject mode"
msgstr "%s: auto-uitwerpingsmodus wordt ingeschakeld"

#: sys-utils/eject.c:933
#, c-format
msgid "%s: disabling auto-eject mode"
msgstr "%s: auto-uitwerpingsmodus wordt uitgeschakeld"

#: sys-utils/eject.c:941
#, c-format
msgid "%s: closing tray"
msgstr "%s: sluiten van lade"

#: sys-utils/eject.c:950
#, c-format
msgid "%s: toggling tray"
msgstr "%s: omschakelen van lade"

#: sys-utils/eject.c:959
#, c-format
msgid "%s: listing CD-ROM speed"
msgstr "%s\" tonen van CD-ROM-snelheid"

#: sys-utils/eject.c:985
#, c-format
msgid "error: %s: device in use"
msgstr "fout: %s: apparaat is bezig"

#: sys-utils/eject.c:991
#, c-format
msgid "%s: selecting CD-ROM disc #%ld"
msgstr "%s: kiezen van CD-ROM-schijf #%ld"

#: sys-utils/eject.c:1007
#, c-format
msgid "%s: trying to eject using CD-ROM eject command"
msgstr "%s: poging tot uitwerping met CD-ROM-uitwerpcommando"

#: sys-utils/eject.c:1009
msgid "CD-ROM eject command succeeded"
msgstr "CD-ROM-uitwerpcommando is geslaagd"

#: sys-utils/eject.c:1014
#, c-format
msgid "%s: trying to eject using SCSI commands"
msgstr "%s: poging tot uitwerping met SCSI-commando's"

#: sys-utils/eject.c:1016
msgid "SCSI eject succeeded"
msgstr "SCSI-uitwerping is geslaagd"

#: sys-utils/eject.c:1017
msgid "SCSI eject failed"
msgstr "SCSI-uitwerping is mislukt"

#: sys-utils/eject.c:1021
#, c-format
msgid "%s: trying to eject using floppy eject command"
msgstr "%s: poging tot uitwerping met floppy-uitwerpcommando"

#: sys-utils/eject.c:1023
msgid "floppy eject command succeeded"
msgstr "floppy-uitwerpcommando is geslaagd"

#: sys-utils/eject.c:1024
msgid "floppy eject command failed"
msgstr "floppy-uitwerpcommando is mislukt"

#: sys-utils/eject.c:1028
#, c-format
msgid "%s: trying to eject using tape offline command"
msgstr "%s: poging tot uitwerping met band-offline-commando"

#: sys-utils/eject.c:1030
msgid "tape offline command succeeded"
msgstr "band-offline-commando is geslaagd"

#: sys-utils/eject.c:1031
msgid "tape offline command failed"
msgstr "band-offline-commando is mislukt"

#: sys-utils/eject.c:1035
msgid "unable to eject"
msgstr "kan niet uitwerpen"

#: sys-utils/fallocate.c:83
#, c-format
msgid " %s [options] <filename>\n"
msgstr "  %s [opties] <bestand>\n"

#: sys-utils/fallocate.c:86
msgid "Preallocate space to, or deallocate space from a file.\n"
msgstr "Reserveert ruimte voor, of ontneemt deze aan een bestand.\n"

#: sys-utils/fallocate.c:89
msgid " -c, --collapse-range remove a range from the file\n"
msgstr "  -c, --collapse-range   een bereik uit een bestand verwijderen\n"

#: sys-utils/fallocate.c:90
msgid " -d, --dig-holes      detect zeroes and replace with holes\n"
msgstr "  -d, --dig-holes        blokken van nullen detecteren en vervangen door gaten\n"

#: sys-utils/fallocate.c:91
msgid " -i, --insert-range   insert a hole at range, shifting existing data\n"
msgstr ""

#: sys-utils/fallocate.c:92
msgid " -l, --length <num>   length for range operations, in bytes\n"
msgstr "  -l, --length <getal>   lengte voor bewerkingen op een bereik, in bytes\n"

#: sys-utils/fallocate.c:93
msgid " -n, --keep-size      maintain the apparent size of the file\n"
msgstr "  -n, --keep-size        de schijnbare grootte van het bestand behouden\n"

#: sys-utils/fallocate.c:94
msgid " -o, --offset <num>   offset for range operations, in bytes\n"
msgstr "  -o, --offset <getal>   op deze positie in het bestand beginnen, in bytes\n"

#: sys-utils/fallocate.c:95
msgid " -p, --punch-hole     replace a range with a hole (implies -n)\n"
msgstr "  -p, --punch-hole       een bereik vervangen door een gat  (impliceert '-n')\n"

#: sys-utils/fallocate.c:96
msgid " -z, --zero-range     zero and ensure allocation of a range\n"
msgstr "  -z, --zero-range       een bereik reserveren en met nullen vullen\n"

#: sys-utils/fallocate.c:98
#, fuzzy
msgid " -x, --posix          use posix_fallocate(3) instead of fallocate(2)\n"
msgstr "  -y, --physical          fysieke in plaats van logische IDs tonen\n"

#: sys-utils/fallocate.c:135
msgid "fallocate failed: keep size mode is unsupported"
msgstr "fallocate() is mislukt: 'keep-size'-modus (optie '-n') wordt niet ondersteund"

#: sys-utils/fallocate.c:136 sys-utils/fallocate.c:145
msgid "fallocate failed"
msgstr "fallocate() is mislukt"

#: sys-utils/fallocate.c:234
#, c-format
msgid "%s: read failed"
msgstr "%s: read() is mislukt"

#: sys-utils/fallocate.c:280
#, c-format
msgid "%s: %s (%ju bytes) converted to sparse holes.\n"
msgstr "%s: %s (%ju bytes) zijn geconverteerd naar gaten\n"

#: sys-utils/fallocate.c:363
msgid "posix_fallocate support is not compiled"
msgstr ""

#: sys-utils/fallocate.c:377 sys-utils/fsfreeze.c:107
msgid "no filename specified"
msgstr "geen bestandsnaam gegeven"

#: sys-utils/fallocate.c:389 sys-utils/fallocate.c:395
msgid "invalid length value specified"
msgstr "ongeldige lengte gegeven"

#: sys-utils/fallocate.c:393
msgid "no length argument specified"
msgstr "geen lengte gegeven"

#: sys-utils/fallocate.c:398
msgid "invalid offset value specified"
msgstr "ongeldige plaatswaarde gegeven"

#: sys-utils/flock.c:53
#, c-format
msgid ""
" %1$s [options] <file>|<directory> <command> [<argument>...]\n"
" %1$s [options] <file>|<directory> -c <command>\n"
" %1$s [options] <file descriptor number>\n"
msgstr ""
"  %1$s [opties] <bestand>|<map> <opdracht> [<argument>...]\n"
"  %1$s [opties] <bestand>|<map> -c <opdracht>\n"
"  %1$s [opties] <bestandsdecriptornummer>\n"

#: sys-utils/flock.c:59
msgid "Manage file locks from shell scripts.\n"
msgstr "Regelt bestandsvergrendelingen vanuit shell-scripts.\n"

#: sys-utils/flock.c:62
msgid " -s, --shared             get a shared lock\n"
msgstr "  -s, --shared             een gedeelde vergrendeling verkrijgen\n"

#: sys-utils/flock.c:63
msgid " -x, --exclusive          get an exclusive lock (default)\n"
msgstr "  -x, --exclusive          een exclusieve vergrendeling verkrijgen (standaard)\n"

#: sys-utils/flock.c:64
msgid " -u, --unlock             remove a lock\n"
msgstr "  -u, --unlock             een vergrendeling verwijderen\n"

#: sys-utils/flock.c:65
msgid " -n, --nonblock           fail rather than wait\n"
msgstr "  -n, --nonblock           falen in plaats van wachten\n"

#: sys-utils/flock.c:66
msgid " -w, --timeout <secs>     wait for a limited amount of time\n"
msgstr "  -w, --timeout <getal>    dit aantal seconden wachten\n"

#: sys-utils/flock.c:67
msgid " -E, --conflict-exit-code <number>  exit code after conflict or timeout\n"
msgstr "  -E, --conflict-exit-code <getal>  afsluitwaarde na conflict of tijdsoverschrijding\n"

#: sys-utils/flock.c:68
msgid " -o, --close              close file descriptor before running command\n"
msgstr "  -o, --close              bestandsdescriptor sluiten vóór uitvoeren van opdracht\n"

#: sys-utils/flock.c:69
msgid " -c, --command <command>  run a single command string through the shell\n"
msgstr "  -c, --command <opdracht> deze ene opdracht uitvoeren via de shell\n"

#: sys-utils/flock.c:70
msgid " -F, --no-fork            execute command without forking\n"
msgstr "  -F, --no-fork            opdracht uitvoeren zonder een nieuw proces te starten\n"

#: sys-utils/flock.c:71
msgid "     --verbose            increase verbosity\n"
msgstr "      --verbose            meer informatie tonen\n"

#: sys-utils/flock.c:107
#, c-format
msgid "cannot open lock file %s"
msgstr "kan vergrendelingsbestand %s niet openen"

#: sys-utils/flock.c:205
msgid "invalid timeout value"
msgstr "ongeldige tijdslimiet"

#: sys-utils/flock.c:209
msgid "invalid exit code"
msgstr "ongeldige afsluitwaarde"

#: sys-utils/flock.c:226
msgid "the --no-fork and --close options are incompatible"
msgstr "opties '--no-fork' en '--close' gaan niet samen"

#: sys-utils/flock.c:234
#, c-format
msgid "%s requires exactly one command argument"
msgstr "%s vereist precies één opdrachtargument"

#: sys-utils/flock.c:252
msgid "bad file descriptor"
msgstr "ongeldige bestandsdescriptor"

#: sys-utils/flock.c:255
msgid "requires file descriptor, file or directory"
msgstr "vereist een bestandsdescriptor, een bestand, of een map"

#: sys-utils/flock.c:279
msgid "failed to get lock"
msgstr "verkrijgen van vergrendeling is mislukt"

#: sys-utils/flock.c:286
msgid "timeout while waiting to get lock"
msgstr "tijdslimiet is verstreken tijdens wachten op vergrendeling"

#: sys-utils/flock.c:327
#, c-format
msgid "%s: getting lock took %ld.%06ld seconds\n"
msgstr "%s: verkrijgen van vergrendeling duurde %ld.%06ld seconden\n"

#: sys-utils/flock.c:338
#, c-format
msgid "%s: executing %s\n"
msgstr "%s: uitvoeren van %s\n"

#: sys-utils/fsfreeze.c:40
#, c-format
msgid " %s [options] <mountpoint>\n"
msgstr "  %s [opties] <aankoppelingspunt>\n"

#: sys-utils/fsfreeze.c:43
#, fuzzy
msgid "Suspend access to a filesystem.\n"
msgstr "Koppelt een bestandssysteem aan.\n"

#: sys-utils/fsfreeze.c:46
msgid " -f, --freeze      freeze the filesystem\n"
msgstr "  -f, --freeze      het bestandssysteem bevriezen\n"

#: sys-utils/fsfreeze.c:47
msgid " -u, --unfreeze    unfreeze the filesystem\n"
msgstr "  -u, --unfreeze    het bestandssysteem ontdooien\n"

#: sys-utils/fsfreeze.c:105
msgid "neither --freeze or --unfreeze specified"
msgstr "noch '--freeze' noch '--unfreeze' is aangegeven"

#: sys-utils/fsfreeze.c:125
#, c-format
msgid "%s: is not a directory"
msgstr "%s: is geen map"

#: sys-utils/fsfreeze.c:132
#, c-format
msgid "%s: freeze failed"
msgstr "%s: bevriezen is mislukt"

#: sys-utils/fsfreeze.c:138
#, c-format
msgid "%s: unfreeze failed"
msgstr "%s: ontdooien is mislukt"

#: sys-utils/fstrim.c:82
#, c-format
msgid "%s: not a directory"
msgstr "%s: is geen map"

#: sys-utils/fstrim.c:91
#, c-format
msgid "%s: FITRIM ioctl failed"
msgstr "%s: ioctl(FITRIM) is mislukt"

#. TRANSLATORS: The standard value here is a very large number.
#: sys-utils/fstrim.c:100
#, c-format
msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
msgstr "%s: %s (%<PRIu64> bytes) is getrimd\n"

#: sys-utils/fstrim.c:191 sys-utils/swapon.c:730 sys-utils/umount.c:225
#, c-format
msgid "failed to parse %s"
msgstr "ontleden van %s is mislukt"

#: sys-utils/fstrim.c:251
#, c-format
msgid " %s [options] <mount point>\n"
msgstr "  %s [opties] <aankoppelingspunt>\n"

#: sys-utils/fstrim.c:254
msgid "Discard unused blocks on a mounted filesystem.\n"
msgstr "Verwerpt ongebruikte blokken op een aangekoppeld bestandssysteem.\n"

#: sys-utils/fstrim.c:257
msgid " -a, --all           trim all mounted filesystems that are supported\n"
msgstr " -a, --all              alle ondersteunde aangekoppelde bestandssystemen trimmen\n"

#: sys-utils/fstrim.c:258
msgid " -o, --offset <num>  the offset in bytes to start discarding from\n"
msgstr " -o, --offset <getal>   de positie vanaf waar met verwerpen te beginnen\n"

#: sys-utils/fstrim.c:259
msgid " -l, --length <num>  the number of bytes to discard\n"
msgstr " -l, --length <getal>   het aantal te verwerpen bytes\n"

#: sys-utils/fstrim.c:260
msgid " -m, --minimum <num> the minimum extent length to discard\n"
msgstr " -m, --minimum <getal>  de minimum lengte van de te verwerpen extents\n"

#: sys-utils/fstrim.c:261
msgid " -v, --verbose       print number of discarded bytes\n"
msgstr " -v, --verbose          het aantal verworpen bytes weergeven\n"

#: sys-utils/fstrim.c:316
msgid "failed to parse minimum extent length"
msgstr "ontleden van minimum-extent-lengte is mislukt"

#: sys-utils/fstrim.c:329
msgid "no mountpoint specified"
msgstr "geen aankoppelingspunt opgegeven"

#: sys-utils/fstrim.c:343
#, c-format
msgid "%s: the discard operation is not supported"
msgstr "%s: verwerpen wordt niet ondersteund"

#: sys-utils/hwclock.c:188
#, c-format
msgid "Assuming hardware clock is kept in %s time.\n"
msgstr "Er wordt aangenomen dat de hardwareklok op %s staat.\n"

#: sys-utils/hwclock.c:189 sys-utils/hwclock.c:256
msgid "UTC"
msgstr "UTC-tijd"

#: sys-utils/hwclock.c:189 sys-utils/hwclock.c:255
msgid "local"
msgstr "lokale tijd"

# FIXME: backticks
#: sys-utils/hwclock.c:242
msgid ""
"Warning: unrecognized third line in adjtime file\n"
"(Expected: `UTC' or `LOCAL' or nothing.)"
msgstr ""
"Waarschuwing: derde regel in adjtime-bestand is niet herkend.\n"
"(Verwacht werd 'UTC' of 'LOCAL' of niets.)"

#: sys-utils/hwclock.c:249
#, c-format
msgid "Last drift adjustment done at %ld seconds after 1969\n"
msgstr "Laatste verschuivingscorrectie is %ld seconden na 1969 gedaan.\n"

#: sys-utils/hwclock.c:251
#, c-format
msgid "Last calibration done at %ld seconds after 1969\n"
msgstr "Laatste calibratie is %ld seconden na 1969 gedaan.\n"

#: sys-utils/hwclock.c:253
#, c-format
msgid "Hardware clock is on %s time\n"
msgstr "Hardwareklok staat op %s.\n"

#: sys-utils/hwclock.c:280
#, c-format
msgid "Waiting for clock tick...\n"
msgstr "Wachten op kloktik...\n"

#: sys-utils/hwclock.c:286
#, c-format
msgid "...synchronization failed\n"
msgstr "...synchronisatie is mislukt.\n"

#: sys-utils/hwclock.c:288
#, c-format
msgid "...got clock tick\n"
msgstr "...kloktik ontvangen.\n"

#: sys-utils/hwclock.c:327
#, c-format
msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
msgstr "Ongeldige waarden in hardwareklok: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"

#: sys-utils/hwclock.c:335
#, c-format
msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr "Hardwarekloktijd is: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n"

#: sys-utils/hwclock.c:361
#, c-format
msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
msgstr "Tijd gelezen van de hardwareklok: %4d/%.2d/%.2d %02d:%02d:%02d\n"

#: sys-utils/hwclock.c:388
#, c-format
msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr "Instellen van hardwareklok op %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n"

#: sys-utils/hwclock.c:394 sys-utils/hwclock.c:638 sys-utils/hwclock.c:726
#, fuzzy, c-format
msgid "Test mode: clock was not changed\n"
msgstr "Tijd van laatste wijziging"

#: sys-utils/hwclock.c:486
#, c-format
msgid "sleeping ~%d usec\n"
msgstr "ongeveer %d microseconden slapen\n"

#: sys-utils/hwclock.c:497
#, c-format
msgid "time jumped backward %.6f seconds to %ld.%06ld - retargeting\n"
msgstr "de tijd is %.6f seconden achterwaarts gesprongen naar %ld.%06ld -- nieuw doel...\n"

#: sys-utils/hwclock.c:505
#, c-format
msgid "%ld.%06ld < %ld.%06ld (%.6f)\n"
msgstr "%ld.%06ld < %ld.%06ld (%.6f)\n"

#: sys-utils/hwclock.c:521
#, c-format
msgid "missed it - %ld.%06ld is too far past %ld.%06ld (%.6f > %.6f)\n"
msgstr "verslapen -- %ld.%06ld is te ver voorbij %ld.%06ld (%.6f > %.6f)\n"

#: sys-utils/hwclock.c:549
#, c-format
msgid ""
"%ld.%06ld is close enough to %ld.%06ld (%.6f < %.6f)\n"
"Set RTC to %ld (%ld + %d; refsystime = %ld.%06ld)\n"
msgstr ""
"%ld.%06ld is dicht genoeg bij %ld.%06ld (%.6f < %.6f);\n"
"instellen van RTC op %ld (%ld + %d; referentiesysteemtijd = %ld.%06ld)\n"

#: sys-utils/hwclock.c:571
msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095)."
msgstr "De hardwareklok bevat waarden die ofwel onjuist zijn (bijvoorbeeld de 50e dag van de maand) of buiten het ondersteunde bereik vallen (bijvoorbeeld het jaar 2095)."

#: sys-utils/hwclock.c:612
msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it."
msgstr "De hardwareklok bevat geen geldige tijd, zodat de systeemtijd er niet mee ingesteld kan worden."

#: sys-utils/hwclock.c:631 sys-utils/hwclock.c:718
#, c-format
msgid "Calling settimeofday:\n"
msgstr "Aanroep van settimeofday():\n"

#: sys-utils/hwclock.c:632 sys-utils/hwclock.c:720
#, c-format
msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"

#: sys-utils/hwclock.c:634 sys-utils/hwclock.c:722
#, c-format
msgid "\ttz.tz_minuteswest = %d\n"
msgstr "\ttz.tz_minuteswest = %d\n"

#: sys-utils/hwclock.c:654 sys-utils/hwclock.c:750
msgid "Must be superuser to set system clock."
msgstr "U moet root zijn om de systeemklok in te kunnen stellen."

#: sys-utils/hwclock.c:657 sys-utils/hwclock.c:753
msgid "settimeofday() failed"
msgstr "settimeofday() is mislukt"

#: sys-utils/hwclock.c:693
#, c-format
msgid "Current system time: %ld = %s\n"
msgstr "Huidige systeemtijd: %ld = %s\n"

#: sys-utils/hwclock.c:719
#, c-format
msgid "\tUTC: %s\n"
msgstr "\tUTC: %s\n"

#: sys-utils/hwclock.c:784
#, c-format
msgid "Not adjusting drift factor because the --update-drift option was not used.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast,\n"
"omdat de optie --update-drift niet is gebruikt.\n"

#: sys-utils/hwclock.c:788
#, c-format
msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast,\n"
"omdat de hardwareklok eerder rommel bevatte.\n"

#: sys-utils/hwclock.c:793
#, c-format
msgid ""
"Not adjusting drift factor because last calibration time is zero,\n"
"so history is bad and calibration startover is necessary.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast\n"
"omdat de laatste calibratietijd nul was.\n"
"Er is dus geen bruikbare geschiedenis,\n"
"en een latere hercalibratie is nodig.\n"

#: sys-utils/hwclock.c:799
#, c-format
msgid "Not adjusting drift factor because it has been less than four hours since the last calibration.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast,\n"
"omdat de vorige calibratie minder dan vier uur geleden is.\n"

#: sys-utils/hwclock.c:837
#, c-format
msgid ""
"Clock drift factor was calculated as %f seconds/day.\n"
"It is far too much. Resetting to zero.\n"
msgstr ""
"De verschuivingsfactor werd berekend op %f seconden/dag.\n"
"Dat is veel te veel.  Is teruggezet op nul.\n"

#: sys-utils/hwclock.c:844
#, c-format
msgid ""
"Clock drifted %f seconds in the past %f seconds\n"
"in spite of a drift factor of %f seconds/day.\n"
"Adjusting drift factor by %f seconds/day\n"
msgstr ""
"De klok is %f seconden verschoven in de laatste %f seconden,\n"
"ondanks een verschuivingsfactor van %f seconden/dag.\n"
"De verschuivingsfactor wordt met %f seconden/dag aangepast.\n"

#: sys-utils/hwclock.c:888
#, fuzzy, c-format
msgid "Time since last adjustment is %ld second\n"
msgid_plural "Time since last adjustment is %ld seconds\n"
msgstr[0] "De verlopen tijd sinds de vorige aanpassing is %d seconde.\n"
msgstr[1] "De verlopen tijd sinds de vorige aanpassing is %d seconden.\n"

#: sys-utils/hwclock.c:892
#, c-format
msgid "Calculated Hardware Clock drift is %ld.%06ld seconds\n"
msgstr "De berekende hardwareklokdrift is %ld.%06ld seconden.\n"

#: sys-utils/hwclock.c:922
#, fuzzy, c-format
msgid ""
"Test mode: %s was not updated with:\n"
"%s"
msgstr "apparaat %s is niet gerelateerd aan %s\n"

#: sys-utils/hwclock.c:931
#, c-format
msgid "Could not open file with the clock adjustment parameters in it (%s) for writing"
msgstr "Kan bestand met klokaanpassingsgegevens (%s) niet openen om te schrijven"

#: sys-utils/hwclock.c:935
#, c-format
msgid "Could not update file with the clock adjustment parameters (%s) in it"
msgstr "Kan bestand met klokaanpassingsgegevens (%s) niet bijwerken"

#: sys-utils/hwclock.c:941
msgid "Drift adjustment parameters not updated."
msgstr "De parameters voor de verschuivingsaanpassing zijn niet bijgewerkt."

#: sys-utils/hwclock.c:974
msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it."
msgstr "De hardwareklok bevat geen geldige tijd, zodat die niet aangepast kan worden."

#: sys-utils/hwclock.c:982
#, c-format
msgid "Not setting clock because last adjustment time is zero, so history is bad.\n"
msgstr ""
"De klok wordt niet ingesteld\n"
"omdat de laatste aanpassingstijd nul is.\n"
"Er is dus geen bruikbare geschiedenis.\n"

#: sys-utils/hwclock.c:986
#, c-format
msgid "Not setting clock because drift factor %f is far too high.\n"
msgstr ""
"De klok wordt niet ingesteld\n"
"omdat verschuivingsfactor %f veel te hoog is.\n"

#: sys-utils/hwclock.c:1014
#, c-format
msgid "No usable clock interface found.\n"
msgstr "Geen bruikbare klok-interface gevonden.\n"

#: sys-utils/hwclock.c:1015
msgid "Cannot access the Hardware Clock via any known method."
msgstr "Kan op geen enkele bekende manier toegang krijgen tot de hardwareklok."

#: sys-utils/hwclock.c:1018
msgid "Use the --debug option to see the details of our search for an access method."
msgstr ""
"Gebruik de optie '--debug' om alle details over de zoektocht\n"
"naar een toegangsmethode te zien."

#: sys-utils/hwclock.c:1120
#, c-format
msgid "Needed adjustment is less than one second, so not setting clock.\n"
msgstr ""
"De benodigde aanpassing is minder dan één seconde;\n"
"de klok wordt niet veranderd.\n"

#: sys-utils/hwclock.c:1140 sys-utils/hwclock.c:1146
#, c-format
msgid "Unable to set system clock.\n"
msgstr "Instellen van de systeemklok is mislukt.\n"

#: sys-utils/hwclock.c:1154
#, c-format
msgid "At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
msgstr "Op %ld seconden na 1969 is de voorspelde waarde van RTC %ld seconden na 1969.\n"

#: sys-utils/hwclock.c:1177
msgid "Unable to get the epoch value from the kernel."
msgstr "Verkrijgen van de tijdperkwaarde van de kernel is mislukt."

#: sys-utils/hwclock.c:1179
#, c-format
msgid "Kernel is assuming an epoch value of %lu\n"
msgstr "Kernel neemt als tijdperkwaarde %lu aan.\n"

#: sys-utils/hwclock.c:1184
msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it."
msgstr "Om de tijdperkwaarde in te stellen dient u de optie --epoch te gebruiken."

#: sys-utils/hwclock.c:1188
#, c-format
msgid "Not setting the epoch to %lu - testing only.\n"
msgstr "Tijdperk wordt niet ingesteld op %lu -- in testmodus.\n"

#: sys-utils/hwclock.c:1192
#, c-format
msgid "Unable to set the epoch value in the kernel.\n"
msgstr "Instellen van de tijdperkwaarde in de kernel is mislukt.\n"

#: sys-utils/hwclock.c:1220
msgid " hwclock [function] [option...]\n"
msgstr "  hwclock [functie] [optie...]\n"

#: sys-utils/hwclock.c:1223
msgid "Query or set the hardware clock.\n"
msgstr "Leest de hardwareklok of stelt deze in.\n"

#: sys-utils/hwclock.c:1225
msgid ""
"\n"
"Functions:\n"
msgstr ""
"\n"
"Functies:\n"

#: sys-utils/hwclock.c:1226
msgid ""
" -h, --help           show this help text and exit\n"
" -r, --show           read hardware clock and print result\n"
"     --get            read hardware clock and print drift corrected result\n"
"     --set            set the RTC to the time given with --date\n"
msgstr ""
"  -h, --help        deze hulptekst tonen\n"
"  -r, --show        de hardwareklok lezen en het resultaat tonen\n"
"      --get         de hardwareklok lezen en driftgecorrigeerd resultaat tonen\n"
"      --set         de hardwareklok instellen op de tijd gegeven met '--date'\n"

#: sys-utils/hwclock.c:1230
msgid ""
" -s, --hctosys        set the system time from the hardware clock\n"
" -w, --systohc        set the hardware clock from the current system time\n"
"     --systz          set the system time based on the current timezone\n"
"     --adjust         adjust the RTC to account for systematic drift since\n"
"                        the clock was last set or adjusted\n"
msgstr ""
"  -s, --hctosys     aan de hand van de hardwareklok de systeemklok instellen\n"
"  -w, --systohc     aan de hand van de systeemklok de hardwareklok instellen\n"
"      --systz       de systeemklok instellen aan de hand van de tijdzone\n"
"      --adjust      de hardwareklok aanpassen ter compensatie van systematische\n"
"                      verschuiving sinds de laatste instelling/aanpassing\n"

#: sys-utils/hwclock.c:1236
msgid ""
"     --getepoch       print out the kernel's hardware clock epoch value\n"
"     --setepoch       set the kernel's hardware clock epoch value to the \n"
"                        value given with --epoch\n"
msgstr ""
"      --getepoch    tijdperkwaarde van de kernel tonen\n"
"      --setepoch    tijdperkwaarde van de kernel instellen op de waarde\n"
"                      gegeven met de optie '--epoch'\n"

#: sys-utils/hwclock.c:1240
msgid ""
"     --predict        predict RTC reading at time given with --date\n"
" -V, --version        display version information and exit\n"
msgstr ""
"      --predict     hardwarekloktijd voorspellen op moment gegeven met '--date'\n"
"  -V, --version     programmaversie tonen en stoppen\n"

#: sys-utils/hwclock.c:1244
msgid ""
" -u, --utc            the hardware clock is kept in UTC\n"
"     --localtime      the hardware clock is kept in local time\n"
msgstr ""
"  -u, --utc         de hardwareklok bevat de gecoördineerde universele tijd\n"
"      --localtime   de hardwareklok bevat de lokale tijd\n"

#: sys-utils/hwclock.c:1247
msgid " -f, --rtc <file>     special /dev/... file to use instead of default\n"
msgstr "  -f, --rtc <bestand>  te gebruiken RTC-bestand in /dev/ in plaats van standaard\n"

#: sys-utils/hwclock.c:1250
#, c-format
msgid ""
"     --directisa      access the ISA bus directly instead of %s\n"
"     --date <time>    specifies the time to which to set the hardware clock\n"
msgstr ""

#: sys-utils/hwclock.c:1253
msgid "     --epoch <year>   specifies the hardware clock's epoch value\n"
msgstr ""

#: sys-utils/hwclock.c:1256
#, c-format
msgid ""
"     --update-drift   update drift factor in %1$s (requires\n"
"                        --set or --systohc)\n"
"     --noadjfile      do not access %1$s; this requires the use of\n"
"                        either --utc or --localtime\n"
"     --adjfile <file> specifies the path to the adjust file;\n"
"                        the default is %1$s\n"
msgstr ""
"      --update-drift        verschuivingsfactor in %1$s bijwerken\n"
"                              (dit vereist '--set' of '--systohc')\n"
"      --noadjfile           bestand %1$s niet gebruiken\n"
"                              (samen met '--utc' of '--localtime')\n"
"      --adjfile <bestand>   te gebruiken verschuivings-registratiebestand\n"
"                              (standaard is %1$s)\n"

#: sys-utils/hwclock.c:1262
msgid ""
"     --test           do not update anything, just show what would happen\n"
" -D, --debug          debugging mode\n"
"\n"
msgstr ""
"      --test        niets echt wijzigen, alleen tonen wat gedaan zou worden\n"
"  -D, --debug       debug-modus inschakelen\n"
"\n"

#: sys-utils/hwclock.c:1368
msgid "Unable to connect to audit system"
msgstr "Kan geen verbinding maken met auditsysteem"

#: sys-utils/hwclock.c:1432
msgid "invalid epoch argument"
msgstr "ongeldige tijdperkwaarde"

#: sys-utils/hwclock.c:1488
#, fuzzy, c-format
msgid "%d too many arguments given"
msgstr "te veel argumenten"

#: sys-utils/hwclock.c:1496
msgid "With --noadjfile, you must specify either --utc or --localtime"
msgstr "Bij '--noadjfile' moet u of '--utc' of '--localtime' aangeven."

#: sys-utils/hwclock.c:1503
msgid "--date is required for --set or --predict"
msgstr ""

#: sys-utils/hwclock.c:1509
#, fuzzy, c-format
msgid "invalid date '%s'"
msgstr "ongeldig ID: %s"

#: sys-utils/hwclock-cmos.c:391
#, fuzzy
msgid "ISA port access is not implemented"
msgstr "Plymouth-verzoek %c is niet geïmplementeerd"

#: sys-utils/hwclock-cmos.c:394
#, fuzzy
msgid "iopl() port access failed"
msgstr "kan bestand %s niet bereiken"

#: sys-utils/hwclock-cmos.c:396
msgid "root privileges may be required"
msgstr ""

#: sys-utils/hwclock-cmos.c:402
#, fuzzy
msgid "Using direct ISA access to the clock"
msgstr "Gebruik van directe invoer-/uitvoerinstructies voor ISA-klok."

#: sys-utils/hwclock-rtc.c:129
#, fuzzy, c-format
msgid "Trying to open: %s\n"
msgstr "Poging tot afkoppelen van %s...\n"

#: sys-utils/hwclock-rtc.c:151 sys-utils/hwclock-rtc.c:249
#: sys-utils/hwclock-rtc.c:411 sys-utils/hwclock-rtc.c:454
#, fuzzy
msgid "cannot open rtc device"
msgstr "kan deze niet openen: "

#: sys-utils/hwclock-rtc.c:187
#, c-format
msgid "ioctl(%s) to %s to read the time failed"
msgstr "ioctl(%s) op %s om de tijd te lezen is mislukt"

#: sys-utils/hwclock-rtc.c:210
#, c-format
msgid "Waiting in loop for time from %s to change\n"
msgstr "Wachten in lus totdat de tijd van %s verandert...\n"

#: sys-utils/hwclock-rtc.c:229
msgid "Timed out waiting for time change."
msgstr "Wachten op veranderende tijd duurde te lang."

#: sys-utils/hwclock-rtc.c:286
#, c-format
msgid "select() to %s to wait for clock tick timed out"
msgstr "select() van %s voor wachten op kloktik duurde te lang"

#: sys-utils/hwclock-rtc.c:289
#, c-format
msgid "select() to %s to wait for clock tick failed"
msgstr "select() van %s voor wachten op kloktik is mislukt"

#: sys-utils/hwclock-rtc.c:294
#, c-format
msgid "ioctl() to %s to turn off update interrupts failed"
msgstr "ioctl() op %s om bijwerkingsonderbrekingen uit te zetten is mislukt"

#: sys-utils/hwclock-rtc.c:304
#, c-format
msgid "%s does not have interrupt functions. "
msgstr "Apparaat %s heeft geen onderbrekingsfuncties. "

#: sys-utils/hwclock-rtc.c:308
#, c-format
msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
msgstr "ioctl() op %s om bijwerkingsonderbrekingen aan te zetten is onverwacht mislukt"

#: sys-utils/hwclock-rtc.c:361
#, fuzzy, c-format
msgid "ioctl(%s) to %s to set the time failed"
msgstr "ioctl(%s) op %s om tijd in te stellen is mislukt"

#: sys-utils/hwclock-rtc.c:367
#, c-format
msgid "ioctl(%s) was successful.\n"
msgstr "ioctl(%s) is geslaagd\n"

#: sys-utils/hwclock-rtc.c:378
#, fuzzy
msgid "Using the rtc interface to the clock."
msgstr "Gebruik van /dev-interface voor de klok."

#: sys-utils/hwclock-rtc.c:407 sys-utils/hwclock-rtc.c:450
#, fuzzy
msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file.  This file does not exist on this system."
msgstr ""
"Om de tijdperkwaarde in de kernel aan te kunnen passen, is toegang\n"
"tot het 'rtc'-stuurprogramma van Linux nodig via het speciale\n"
"apparaatbestand %s.  Dit bestand bestaat niet op dit systeem."

#: sys-utils/hwclock-rtc.c:416
#, c-format
msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgstr "ioctl(RTC_EPOCH_READ) op %s is mislukt"

#: sys-utils/hwclock-rtc.c:421
#, c-format
msgid "we have read epoch %lu from %s with RTC_EPOCH_READ ioctl.\n"
msgstr "Tijdperkwaarde %lu is gelezen uit %s met ioctl(RTC_EPOCH_READ).\n"

#: sys-utils/hwclock-rtc.c:441
#, c-format
msgid "The epoch value may not be less than 1900.  You requested %ld"
msgstr "De tijdperkwaarde mag niet minder zijn dan 1900.  U vroeg om %ld."

#: sys-utils/hwclock-rtc.c:459
#, c-format
msgid "setting epoch to %lu with RTC_EPOCH_SET ioctl to %s.\n"
msgstr "Instellen van tijdperkwaarde op %lu naar %s met ioctl(RTC_EPOCH_SET).\n"

#: sys-utils/hwclock-rtc.c:465
#, c-format
msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
msgstr "Het kernelstuurprogramma voor %s heeft geen ioctl(RTC_EPOCH_SET)."

#: sys-utils/hwclock-rtc.c:469
#, c-format
msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgstr "ioctl(RTC_EPOCH_SET) op %s is mislukt"

#: sys-utils/ipcmk.c:69
msgid "Create various IPC resources.\n"
msgstr "Maakt de aangegeven IPC-voorzieningen aan.\n"

#: sys-utils/ipcmk.c:72
msgid " -M, --shmem <size>       create shared memory segment of size <size>\n"
msgstr " -M, --shmem <getal>        gedeeld geheugensegment van deze grootte aanmaken\n"

#: sys-utils/ipcmk.c:73
msgid " -S, --semaphore <number> create semaphore array with <number> elements\n"
msgstr " -S, --semaphore <getal>    semafoor-array met dit aantal elementen aanmaken\n"

#: sys-utils/ipcmk.c:74
msgid " -Q, --queue              create message queue\n"
msgstr " -Q, --queue                berichtenwachtrij aanmaken\n"

#: sys-utils/ipcmk.c:75
msgid " -p, --mode <mode>        permission for the resource (default is 0644)\n"
msgstr " -p, --mode <modus>         toegangsrechten voor hulpbron (standaard is 0644)\n"

#: sys-utils/ipcmk.c:110 sys-utils/losetup.c:702 sys-utils/zramctl.c:626
msgid "failed to parse size"
msgstr "ontleden van grootte is mislukt"

#: sys-utils/ipcmk.c:117
msgid "failed to parse elements"
msgstr "ontleden van elementen is mislukt"

#: sys-utils/ipcmk.c:140
msgid "create share memory failed"
msgstr "aanmaken van gedeeld geheugensegment is mislukt"

#: sys-utils/ipcmk.c:142
#, c-format
msgid "Shared memory id: %d\n"
msgstr "Gedeeld geheugensegment-ID: %d\n"

#: sys-utils/ipcmk.c:148
msgid "create message queue failed"
msgstr "aanmaken van berichtenwachtrij is mislukt"

#: sys-utils/ipcmk.c:150
#, c-format
msgid "Message queue id: %d\n"
msgstr "Berichtenwachtrij-ID: %d\n"

#: sys-utils/ipcmk.c:156
msgid "create semaphore failed"
msgstr "aanmaken van semafoor is mislukt"

#: sys-utils/ipcmk.c:158
#, c-format
msgid "Semaphore id: %d\n"
msgstr "Semafoor-ID: %d\n"

#: sys-utils/ipcrm.c:50
#, c-format
msgid ""
" %1$s [options]\n"
" %1$s shm|msg|sem <id>...\n"
msgstr ""
" %1$s [opties]\n"
" %1$s shm|msg|sem <ID>...\n"

#: sys-utils/ipcrm.c:54
msgid "Remove certain IPC resources.\n"
msgstr "Verwijdert de aangegeven IPC-voorzieningen.\n"

#: sys-utils/ipcrm.c:57
msgid " -m, --shmem-id <id>        remove shared memory segment by id\n"
msgstr " -m, --shmem-id <ID>        gedeeld geheugensegment met deze ID verwijderen\n"

#: sys-utils/ipcrm.c:58
msgid " -M, --shmem-key <key>      remove shared memory segment by key\n"
msgstr " -M, --shmem-key <sleutel>  gedeeld geheugensegment met deze sleutel verwijderen\n"

#: sys-utils/ipcrm.c:59
msgid " -q, --queue-id <id>        remove message queue by id\n"
msgstr " -q, --queue-id <ID>        berichtenwachtrij met deze ID verwijderen\n"

#: sys-utils/ipcrm.c:60
msgid " -Q, --queue-key <key>      remove message queue by key\n"
msgstr " -Q, --queue-key <sleutel>  berichtenwachtrij met deze sleutel verwijderen\n"

#: sys-utils/ipcrm.c:61
msgid " -s, --semaphore-id <id>    remove semaphore by id\n"
msgstr " -s, --semaphore-id <ID>    semafoor met deze ID verwijderen\n"

#: sys-utils/ipcrm.c:62
msgid " -S, --semaphore-key <key>  remove semaphore by key\n"
msgstr " -S, --semaphore-key <sleutel>  semafoor met deze sleutel verwijderen\n"

#: sys-utils/ipcrm.c:63
msgid " -a, --all[=shm|msg|sem]    remove all (in the specified category)\n"
msgstr " -a, --all[=shm|msg|sem]    alle zaken (in deze categorie) verwijderen\n"

#: sys-utils/ipcrm.c:64
msgid " -v, --verbose              explain what is being done\n"
msgstr " -v, --verbose              tonen wat er gedaan wordt\n"

# FIXME: backtick
#: sys-utils/ipcrm.c:86
#, c-format
msgid "removing shared memory segment id `%d'\n"
msgstr "verwijderen van gedeeld geheugensegment met ID '%d'\n"

# FIXME: backtick
#: sys-utils/ipcrm.c:91
#, c-format
msgid "removing message queue id `%d'\n"
msgstr "verwijderen van berichtenwachtrij met ID '%d'\n"

# FIXME: backtick
#: sys-utils/ipcrm.c:96
#, c-format
msgid "removing semaphore id `%d'\n"
msgstr "verwijderen van semafoor met ID '%d'\n"

#: sys-utils/ipcrm.c:108 sys-utils/ipcrm.c:222
msgid "permission denied for key"
msgstr "toegang geweigerd voor sleutel"

#: sys-utils/ipcrm.c:108
msgid "permission denied for id"
msgstr "toegang geweigerd voor ID"

#: sys-utils/ipcrm.c:111 sys-utils/ipcrm.c:228
msgid "invalid key"
msgstr "ongeldige sleutel"

#: sys-utils/ipcrm.c:111
msgid "invalid id"
msgstr "ongeldig ID"

#: sys-utils/ipcrm.c:114 sys-utils/ipcrm.c:225
msgid "already removed key"
msgstr "sleutel is al verwijderd"

#: sys-utils/ipcrm.c:114
msgid "already removed id"
msgstr "ID is al verwijderd"

#: sys-utils/ipcrm.c:117 sys-utils/ipcrm.c:231
msgid "key failed"
msgstr "sleutel heeft gefaald"

#: sys-utils/ipcrm.c:117
msgid "id failed"
msgstr "ID heeft gefaald"

#: sys-utils/ipcrm.c:134
#, c-format
msgid "invalid id: %s"
msgstr "ongeldig ID: %s"

#: sys-utils/ipcrm.c:167
#, c-format
msgid "resource(s) deleted\n"
msgstr "hulpbron(nen) verwijderd\n"

#: sys-utils/ipcrm.c:200
#, c-format
msgid "illegal key (%s)"
msgstr "ongeldige sleutel (%s)"

#: sys-utils/ipcrm.c:256
msgid "kernel not configured for shared memory"
msgstr "deze kernel kent geen gedeeld geheugen"

#: sys-utils/ipcrm.c:269
msgid "kernel not configured for semaphores"
msgstr "deze kernel kent geen semaforen"

#: sys-utils/ipcrm.c:290
msgid "kernel not configured for message queues"
msgstr "deze kernel kent geen berichtwachtrijen"

#: sys-utils/ipcs.c:52
#, c-format
msgid ""
" %1$s [resource-option...] [output-option]\n"
" %1$s -m|-q|-s -i <id>\n"
msgstr ""
"  %1$s [hulpbronoptie...] [uitvoeroptie]\n"
"  %1$s -m|-q|-s -i <ID>\n"

#: sys-utils/ipcs.c:56 sys-utils/lsipc.c:280
msgid "Show information on IPC facilities.\n"
msgstr "Geeft informatie over IPC-voorzieningen.\n"

#: sys-utils/ipcs.c:59
msgid " -i, --id <id>  print details on resource identified by <id>\n"
msgstr "  -i, --id <ID>      details weergeven over de met <ID> aangegeven hulpbron\n"

#: sys-utils/ipcs.c:64 sys-utils/lsipc.c:283
msgid "Resource options:\n"
msgstr "Hulpbronopties:\n"

#: sys-utils/ipcs.c:65 sys-utils/lsipc.c:284
msgid " -m, --shmems      shared memory segments\n"
msgstr "  -m, --shmems       gedeelde geheugensegmenten\n"

#: sys-utils/ipcs.c:66 sys-utils/lsipc.c:285
msgid " -q, --queues      message queues\n"
msgstr "  -q, --queues       berichtwachtrijen\n"

#: sys-utils/ipcs.c:67 sys-utils/lsipc.c:286
msgid " -s, --semaphores  semaphores\n"
msgstr "  -s, --semaphores   semaforen\n"

#: sys-utils/ipcs.c:68
msgid " -a, --all         all (default)\n"
msgstr "  -a, --all          alle drie (standaard)\n"

#: sys-utils/ipcs.c:71
msgid "Output options:\n"
msgstr "Uitvoeropties:\n"

#: sys-utils/ipcs.c:72
msgid " -t, --time        show attach, detach and change times\n"
msgstr "  -t, --time         aanhechtings-, onthechtings- en wijzigingstijden tonen\n"

#: sys-utils/ipcs.c:73
msgid " -p, --pid         show PIDs of creator and last operator\n"
msgstr "  -p, --pid          PID's van aanmaker en laatste operatie tonen\n"

#: sys-utils/ipcs.c:74
msgid " -c, --creator     show creator and owner\n"
msgstr "  -c, --creator      aanmaker en eigenaar tonen\n"

#: sys-utils/ipcs.c:75
msgid " -l, --limits      show resource limits\n"
msgstr "  -l, --limits       hulpbrongrenzen tonen\n"

#: sys-utils/ipcs.c:76
msgid " -u, --summary     show status summary\n"
msgstr "  -u, --summary      een toestandssamenvatting tonen\n"

#: sys-utils/ipcs.c:77
msgid "     --human       show sizes in human-readable format\n"
msgstr "      --human        groottes in leesbare vorm tonen\n"

#: sys-utils/ipcs.c:78
msgid " -b, --bytes       show sizes in bytes\n"
msgstr "  -b, --bytes        groottes in bytes tonen\n"

#: sys-utils/ipcs.c:164
msgid "when using an ID, a single resource must be specified"
msgstr "bij gebruik van een ID dient één enkele hulpbron aangegeven te worden"

#: sys-utils/ipcs.c:204
#, c-format
msgid "unable to fetch shared memory limits\n"
msgstr "kan limieten van gedeeld geheugen niet achterhalen\n"

#: sys-utils/ipcs.c:207
#, c-format
msgid "------ Shared Memory Limits --------\n"
msgstr "------ Gedeeld geheugen: grenzen --------\n"

#: sys-utils/ipcs.c:208
#, c-format
msgid "max number of segments = %ju\n"
msgstr "maximum aantal segmenten = %ju\n"

#: sys-utils/ipcs.c:210
msgid "max seg size"
msgstr "maximum segmentgrootte"

#: sys-utils/ipcs.c:218
msgid "max total shared memory"
msgstr "maximum totaal gedeeld geheugen"

#: sys-utils/ipcs.c:220
msgid "min seg size"
msgstr "minimum segmentgrootte"

#: sys-utils/ipcs.c:232
#, c-format
msgid "kernel not configured for shared memory\n"
msgstr "kernel is niet ingesteld voor gedeeld geheugen\n"

#: sys-utils/ipcs.c:236
#, c-format
msgid "------ Shared Memory Status --------\n"
msgstr "------ Gedeeld geheugen: status --------\n"

#. TRANSLATORS: This output format is maintained for backward
#. compatibility as ipcs is used in scripts. For consistency
#. with the rest, the translated form can follow this model:
#. *
#. "segments allocated = %d\n"
#. "pages allocated = %ld\n"
#. "pages resident = %ld\n"
#. "pages swapped = %ld\n"
#. "swap performance = %ld attempts, %ld successes\n"
#.
#: sys-utils/ipcs.c:248
#, c-format
msgid ""
"segments allocated %d\n"
"pages allocated %ld\n"
"pages resident  %ld\n"
"pages swapped   %ld\n"
"Swap performance: %ld attempts\t %ld successes\n"
msgstr ""
"toegewezen segmenten: %d\n"
"toegewezen pagina's:  %ld\n"
"residente pagina's:   %ld\n"
"geswapte pagina's:    %ld\n"
"Swapprestaties:  %ld pogingen  %ld successen\n"

#: sys-utils/ipcs.c:265
#, c-format
msgid "------ Shared Memory Segment Creators/Owners --------\n"
msgstr "------ Gedeeld geheugen: segmentaanmakers/eigenaars --------\n"

#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:273 sys-utils/ipcs.c:280
#: sys-utils/ipcs.c:286
msgid "shmid"
msgstr "shm-ID"

#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:286 sys-utils/ipcs.c:392
#: sys-utils/ipcs.c:407 sys-utils/ipcs.c:495 sys-utils/ipcs.c:513
msgid "perms"
msgstr "rechten"

#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
msgid "cuid"
msgstr "maker-UID"

#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
msgid "cgid"
msgstr "maker-GID"

#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
msgid "uid"
msgstr "UID"

#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
msgid "gid"
msgstr "GID"

#: sys-utils/ipcs.c:271
#, c-format
msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
msgstr "------ Gedeeld geheugen: aanhecht-/onthecht-/wijzigingstijden --------\n"

#: sys-utils/ipcs.c:273 sys-utils/ipcs.c:280 sys-utils/ipcs.c:286
#: sys-utils/ipcs.c:398 sys-utils/ipcs.c:407 sys-utils/ipcs.c:501
#: sys-utils/ipcs.c:507 sys-utils/ipcs.c:513
msgid "owner"
msgstr "eigenaar"

#: sys-utils/ipcs.c:273
msgid "attached"
msgstr "aangehecht"

#: sys-utils/ipcs.c:273
msgid "detached"
msgstr "onthecht"

#: sys-utils/ipcs.c:274
msgid "changed"
msgstr "gewijzigd"

#: sys-utils/ipcs.c:278
#, c-format
msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
msgstr "------ Gedeeld geheugen: PID's van aanmaker/laatste-operatie --------\n"

#: sys-utils/ipcs.c:280
msgid "cpid"
msgstr "maker-PID"

#: sys-utils/ipcs.c:280
msgid "lpid"
msgstr "laatste-PID"

#: sys-utils/ipcs.c:284
#, c-format
msgid "------ Shared Memory Segments --------\n"
msgstr "------ Gedeeld geheugen: segmenten --------\n"

#: sys-utils/ipcs.c:286 sys-utils/ipcs.c:407 sys-utils/ipcs.c:513
msgid "key"
msgstr "sleutel"

#: sys-utils/ipcs.c:287 sys-utils/ipcs.c:514
msgid "size"
msgstr "grootte"

#: sys-utils/ipcs.c:287 sys-utils/prlimit.c:75 sys-utils/prlimit.c:76
#: sys-utils/prlimit.c:78 sys-utils/prlimit.c:79 sys-utils/prlimit.c:81
#: sys-utils/prlimit.c:82 sys-utils/prlimit.c:86 sys-utils/prlimit.c:90
msgid "bytes"
msgstr "bytes"

#: sys-utils/ipcs.c:288
msgid "nattch"
msgstr "gehecht"

#: sys-utils/ipcs.c:288
msgid "status"
msgstr "status"

#: sys-utils/ipcs.c:312 sys-utils/ipcs.c:314 sys-utils/ipcs.c:316
#: sys-utils/ipcs.c:430 sys-utils/ipcs.c:432 sys-utils/ipcs.c:538
#: sys-utils/ipcs.c:540 sys-utils/ipcs.c:542 sys-utils/ipcs.c:596
#: sys-utils/ipcs.c:598 sys-utils/ipcs.c:627 sys-utils/ipcs.c:629
#: sys-utils/ipcs.c:631 sys-utils/ipcs.c:655
msgid "Not set"
msgstr "(geen)"

#: sys-utils/ipcs.c:342 sys-utils/lsipc.c:987 sys-utils/lsipc.c:993
msgid "dest"
msgstr "doel"

#: sys-utils/ipcs.c:343 sys-utils/lsipc.c:988 sys-utils/lsipc.c:1001
msgid "locked"
msgstr "vergrendeld"

#: sys-utils/ipcs.c:363
#, c-format
msgid "unable to fetch semaphore limits\n"
msgstr "kan limieten van semaforen niet achterhalen\n"

#: sys-utils/ipcs.c:366
#, c-format
msgid "------ Semaphore Limits --------\n"
msgstr "------ Semaforen: grenzen --------\n"

#: sys-utils/ipcs.c:367
#, c-format
msgid "max number of arrays = %d\n"
msgstr "maximum aantal arrays = %d\n"

#: sys-utils/ipcs.c:368
#, c-format
msgid "max semaphores per array = %d\n"
msgstr "maximum aantal semaforen per array = %d\n"

#: sys-utils/ipcs.c:369
#, c-format
msgid "max semaphores system wide = %d\n"
msgstr "maximum aantal semaforen systeemwijd = %d\n"

#: sys-utils/ipcs.c:370
#, c-format
msgid "max ops per semop call = %d\n"
msgstr "maximum aantal operaties per semop()-aanroep = %d\n"

#: sys-utils/ipcs.c:371
#, c-format
msgid "semaphore max value = %u\n"
msgstr "maximale semafoorwaarde = %u\n"

#: sys-utils/ipcs.c:380
#, c-format
msgid "kernel not configured for semaphores\n"
msgstr "deze kernel kent geen semaforen\n"

#: sys-utils/ipcs.c:383
#, c-format
msgid "------ Semaphore Status --------\n"
msgstr "------ Semaforen: status --------\n"

#: sys-utils/ipcs.c:384
#, c-format
msgid "used arrays = %d\n"
msgstr "gebruikte arrays = %d\n"

#: sys-utils/ipcs.c:385
#, c-format
msgid "allocated semaphores = %d\n"
msgstr "gereserveerde semaforen = %d\n"

#: sys-utils/ipcs.c:390
#, c-format
msgid "------ Semaphore Arrays Creators/Owners --------\n"
msgstr "------ Semaforen: arrayaanmakers/-eigenaars --------\n"

#: sys-utils/ipcs.c:392 sys-utils/ipcs.c:398 sys-utils/ipcs.c:407
msgid "semid"
msgstr "sem-ID"

#: sys-utils/ipcs.c:396
#, c-format
msgid "------ Semaphore Operation/Change Times --------\n"
msgstr "------ Semaforen: operatie-/wijzigingstijden --------\n"

#: sys-utils/ipcs.c:398
msgid "last-op"
msgstr "laatste operatie"

#: sys-utils/ipcs.c:398
msgid "last-changed"
msgstr "laatst gewijzigd"

#: sys-utils/ipcs.c:405
#, c-format
msgid "------ Semaphore Arrays --------\n"
msgstr "------ Semaforen: arrays --------\n"

#: sys-utils/ipcs.c:407
msgid "nsems"
msgstr "aantal"

#: sys-utils/ipcs.c:465
#, c-format
msgid "unable to fetch message limits\n"
msgstr "kan limieten van berichten niet achterhalen\n"

#: sys-utils/ipcs.c:468
#, c-format
msgid "------ Messages Limits --------\n"
msgstr "------ Berichten: grenzen --------\n"

#: sys-utils/ipcs.c:469
#, c-format
msgid "max queues system wide = %d\n"
msgstr "maximum aantal wachtrijen systeemwijd = %d\n"

#: sys-utils/ipcs.c:471
msgid "max size of message"
msgstr "maximumgrootte van bericht"

#: sys-utils/ipcs.c:473
msgid "default max size of queue"
msgstr "standaard-maximumgrootte van wachtrij"

#: sys-utils/ipcs.c:480
#, c-format
msgid "kernel not configured for message queues\n"
msgstr "deze kernel kent geen berichtwachtrijen\n"

#: sys-utils/ipcs.c:483
#, c-format
msgid "------ Messages Status --------\n"
msgstr "------ Berichten: status --------\n"

#: sys-utils/ipcs.c:485
#, c-format
msgid "allocated queues = %d\n"
msgstr "gereserveerde wachtrijen = %d\n"

#: sys-utils/ipcs.c:486
#, c-format
msgid "used headers = %d\n"
msgstr "gebruikte koppen = %d\n"

#: sys-utils/ipcs.c:488
msgid "used space"
msgstr "gebruikte ruimte"

#: sys-utils/ipcs.c:489
msgid " bytes\n"
msgstr " bytes\n"

#: sys-utils/ipcs.c:493
#, c-format
msgid "------ Message Queues Creators/Owners --------\n"
msgstr "------ Berichtwachtrijen: aanmakers/eigenaars --------\n"

#: sys-utils/ipcs.c:495 sys-utils/ipcs.c:501 sys-utils/ipcs.c:507
#: sys-utils/ipcs.c:513
msgid "msqid"
msgstr "msq-ID"

#: sys-utils/ipcs.c:499
#, c-format
msgid "------ Message Queues Send/Recv/Change Times --------\n"
msgstr "------ Berichtwachtrijen: verzend-/ontvang-/wijzigingstijden --------\n"

#: sys-utils/ipcs.c:501
msgid "send"
msgstr "verzending"

#: sys-utils/ipcs.c:501
msgid "recv"
msgstr "ontvangst"

#: sys-utils/ipcs.c:501
msgid "change"
msgstr "wijziging"

#: sys-utils/ipcs.c:505
#, c-format
msgid "------ Message Queues PIDs --------\n"
msgstr "------ Berichtwachtrijen: PID's --------\n"

#: sys-utils/ipcs.c:507
msgid "lspid"
msgstr "la.ze.PID"

#: sys-utils/ipcs.c:507
msgid "lrpid"
msgstr "la.ov.PID"

#: sys-utils/ipcs.c:511
#, c-format
msgid "------ Message Queues --------\n"
msgstr "------ Berichtwachtrijen --------\n"

#: sys-utils/ipcs.c:514
msgid "used-bytes"
msgstr "gebruikt"

#: sys-utils/ipcs.c:515
msgid "messages"
msgstr "berichten"

#: sys-utils/ipcs.c:580 sys-utils/ipcs.c:610 sys-utils/ipcs.c:643
#: sys-utils/lsipc.c:537 sys-utils/lsipc.c:729 sys-utils/lsipc.c:889
#, c-format
msgid "id %d not found"
msgstr "ID %d is niet gevonden"

#: sys-utils/ipcs.c:584
#, c-format
msgid ""
"\n"
"Shared memory Segment shmid=%d\n"
msgstr ""
"\n"
"Gedeeld geheugensegment met shm-ID=%d\n"

#: sys-utils/ipcs.c:585
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
msgstr "UID=%u  GID=%u,  maker-UID=%u  maker-GID=%u\n"

#: sys-utils/ipcs.c:588
#, c-format
msgid "mode=%#o\taccess_perms=%#o\n"
msgstr "modus=%#o  toegangsrechten=%#o\n"

#: sys-utils/ipcs.c:590
msgid "size="
msgstr "grootte="

#: sys-utils/ipcs.c:590
msgid "bytes="
msgstr "bytes="

#: sys-utils/ipcs.c:592
#, c-format
msgid "lpid=%u\tcpid=%u\tnattch=%jd\n"
msgstr "laatste-PID=%u  maker-PID=%u  aanhechtingen=%jd\n"

#: sys-utils/ipcs.c:595
#, c-format
msgid "att_time=%-26.24s\n"
msgstr "aanhechttijd   = %-26.24s\n"

#: sys-utils/ipcs.c:597
#, c-format
msgid "det_time=%-26.24s\n"
msgstr "onthechttijd   = %-26.24s\n"

#: sys-utils/ipcs.c:599 sys-utils/ipcs.c:630
#, c-format
msgid "change_time=%-26.24s\n"
msgstr "wijzigingstijd = %-26.24s\n"

#: sys-utils/ipcs.c:614
#, c-format
msgid ""
"\n"
"Message Queue msqid=%d\n"
msgstr ""
"\n"
"Berichtenwachtrij met msq-ID=%d\n"

#: sys-utils/ipcs.c:615
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
msgstr "UID=%u  GID=%u,  maker-UID=%u  maker-GID=%u,  modus=%#o\n"

#: sys-utils/ipcs.c:619
msgid "csize="
msgstr ""

#: sys-utils/ipcs.c:619
msgid "cbytes="
msgstr ""

#: sys-utils/ipcs.c:621
msgid "qsize="
msgstr ""

#: sys-utils/ipcs.c:621
msgid "qbytes="
msgstr ""

#: sys-utils/ipcs.c:626
#, c-format
msgid "send_time=%-26.24s\n"
msgstr "verzendtijd   = %-26.24s\n"

#: sys-utils/ipcs.c:628
#, c-format
msgid "rcv_time=%-26.24s\n"
msgstr "ontvangsttijd = %-26.24s\n"

#: sys-utils/ipcs.c:647
#, c-format
msgid ""
"\n"
"Semaphore Array semid=%d\n"
msgstr ""
"\n"
"Semafoorarray met sem-ID=%d\n"

#: sys-utils/ipcs.c:648
#, c-format
msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
msgstr "UID=%u  GID=%u,  maker-UID=%u  maker-GID=%u\n"

#: sys-utils/ipcs.c:651
#, c-format
msgid "mode=%#o, access_perms=%#o\n"
msgstr "modus=%#o, toegangsrechten=%#o\n"

#: sys-utils/ipcs.c:653
#, c-format
msgid "nsems = %ju\n"
msgstr "aantal semaforen = %ju\n"

#: sys-utils/ipcs.c:654
#, c-format
msgid "otime = %-26.24s\n"
msgstr "laatste operatietijd   = %-26.24s\n"

#: sys-utils/ipcs.c:656
#, c-format
msgid "ctime = %-26.24s\n"
msgstr "laatste wijzigingstijd = %-26.24s\n"

#: sys-utils/ipcs.c:659
msgid "semnum"
msgstr "nummer"

#: sys-utils/ipcs.c:659
msgid "value"
msgstr "waarde"

#: sys-utils/ipcs.c:659
msgid "ncount"
msgstr ""

#: sys-utils/ipcs.c:659
msgid "zcount"
msgstr ""

#: sys-utils/ipcs.c:659
msgid "pid"
msgstr "PID"

#: sys-utils/ipcutils.c:230 sys-utils/ipcutils.c:234 sys-utils/ipcutils.c:238
#: sys-utils/ipcutils.c:242
#, c-format
msgid "%s failed"
msgstr "'%s' is mislukt"

#: sys-utils/ipcutils.c:503
#, c-format
msgid "%s (bytes) = "
msgstr "%s (bytes) = "

#: sys-utils/ipcutils.c:505
#, c-format
msgid "%s (kbytes) = "
msgstr "%s (kbytes) = "

#: sys-utils/ldattach.c:180
msgid "invalid iflag"
msgstr "ongeldige invoervlag"

#: sys-utils/ldattach.c:196
#, c-format
msgid " %s [options] <ldisc> <device>\n"
msgstr "  %s [opties] <lijnprotocol> <apparaat>\n"

#: sys-utils/ldattach.c:199
msgid "Attach a line discipline to a serial line.\n"
msgstr "Stelt een lijnprotocol in op een seriële lijn.\n"

#: sys-utils/ldattach.c:202
msgid " -d, --debug             print verbose messages to stderr\n"
msgstr "  -d, --debug            uitgebreide meldingen tonen op standaardfoutuitvoer\n"

#: sys-utils/ldattach.c:203
msgid " -s, --speed <value>     set serial line speed\n"
msgstr "  -s, --speed <getal>    snelheid van seriële lijn instellen\n"

#: sys-utils/ldattach.c:204
msgid " -c, --intro-command <string> intro sent before ldattach\n"
msgstr "  -c, --intro-command <tekst>  vooropdracht verzonden voor eigenlijke instelling\n"

#: sys-utils/ldattach.c:205
msgid " -p, --pause <seconds>   pause between intro and ldattach\n"
msgstr "  -p, --pause <getal>    aantal seconden pauze tussen vooropdracht en instelling\n"

#: sys-utils/ldattach.c:206
msgid " -7, --sevenbits         set character size to 7 bits\n"
msgstr "  -7, --sevenbits        zeven bits voor één teken gebruiken\n"

#: sys-utils/ldattach.c:207
msgid " -8, --eightbits         set character size to 8 bits\n"
msgstr "  -8, --eightbits        acht bits voor één teken gebruiken\n"

#: sys-utils/ldattach.c:208
msgid " -n, --noparity          set parity to none\n"
msgstr "  -n, --noparity         geen pariteitsbit gebruiken\n"

#: sys-utils/ldattach.c:209
msgid " -e, --evenparity        set parity to even\n"
msgstr "  -e, --evenparity       even pariteit gebruiken\n"

#: sys-utils/ldattach.c:210
msgid " -o, --oddparity         set parity to odd\n"
msgstr "  -o, --oddparity        oneven pariteit gebruiken\n"

#: sys-utils/ldattach.c:211
msgid " -1, --onestopbit        set stop bits to one\n"
msgstr "  -1, --onestopbit       één stopbit gebruiken\n"

#: sys-utils/ldattach.c:212
msgid " -2, --twostopbits       set stop bits to two\n"
msgstr "  -2, --twostopbits      twee stopbits gebruiken\n"

#: sys-utils/ldattach.c:213
msgid " -i, --iflag [-]<iflag>  set input mode flag\n"
msgstr "  -i, --iflag [-]<vlag>  invoervlag inschakelen (of uit met '-')\n"

#: sys-utils/ldattach.c:219
msgid ""
"\n"
"Known <ldisc> names:\n"
msgstr ""
"\n"
"Mogelijke lijnprotocollen zijn:\n"

#: sys-utils/ldattach.c:223
msgid ""
"\n"
"Known <iflag> names:\n"
msgstr ""
"\n"
"Mogelijke invoervlaggen zijn:\n"

#: sys-utils/ldattach.c:340
msgid "invalid speed argument"
msgstr "ongeldige snelheid"

#: sys-utils/ldattach.c:343
msgid "invalid pause argument"
msgstr "ongeldige pauzeertijd"

#: sys-utils/ldattach.c:369
msgid "invalid line discipline argument"
msgstr "ongeldig lijnprotocol"

#: sys-utils/ldattach.c:389
#, c-format
msgid "%s is not a serial line"
msgstr "%s is geen seriële lijn"

#: sys-utils/ldattach.c:396
#, c-format
msgid "cannot get terminal attributes for %s"
msgstr "kan terminaleigenschappen van %s niet bepalen"

#: sys-utils/ldattach.c:399
#, c-format
msgid "speed %d unsupported"
msgstr "snelheid %d is niet mogelijk"

#: sys-utils/ldattach.c:448
#, c-format
msgid "cannot set terminal attributes for %s"
msgstr "kan terminaleigenschappen van %s niet instellen"

#: sys-utils/ldattach.c:458
#, c-format
msgid "cannot write intro command to %s"
msgstr "kan vooropdracht niet naar %s schrijven"

#: sys-utils/ldattach.c:468
msgid "cannot set line discipline"
msgstr "kan lijnprotocol niet instellen"

#: sys-utils/ldattach.c:478
msgid "cannot daemonize"
msgstr "kan er geen achtergronddienst van maken"

#: sys-utils/losetup.c:68
msgid "autoclear flag set"
msgstr "'autoclear'-vlag is gezet"

#: sys-utils/losetup.c:69
msgid "device backing file"
msgstr "achterliggend apparaatbestand"

#: sys-utils/losetup.c:70
msgid "backing file inode number"
msgstr "inodenummer van achterliggend bestand"

#: sys-utils/losetup.c:71
msgid "backing file major:minor device number"
msgstr "hoofd-:subapparaatnummer van achterliggend bestand"

#: sys-utils/losetup.c:72
msgid "loop device name"
msgstr "lus-apparaatnaam"

#: sys-utils/losetup.c:73
msgid "offset from the beginning"
msgstr "positie vanaf het begin"

#: sys-utils/losetup.c:74
msgid "partscan flag set"
msgstr "'partscan'-vlag is gezet"

#: sys-utils/losetup.c:76
msgid "size limit of the file in bytes"
msgstr "groottelimiet van bestand in bytes"

#: sys-utils/losetup.c:77
msgid "loop device major:minor number"
msgstr "hoofd-:subapparaatnummer van lus-apparaat"

#: sys-utils/losetup.c:78
msgid "access backing file with direct-io"
msgstr "achterliggend bestand met direct-IO benaderen"

#: sys-utils/losetup.c:135 sys-utils/losetup.c:147
#, c-format
msgid ", offset %ju"
msgstr ", beginpunt %ju"

#: sys-utils/losetup.c:138 sys-utils/losetup.c:150
#, c-format
msgid ", sizelimit %ju"
msgstr ", maximale grootte %ju"

#: sys-utils/losetup.c:158
#, c-format
msgid ", encryption %s (type %u)"
msgstr ", versleuteling %s (soort %u)"

#: sys-utils/losetup.c:199
#, c-format
msgid "%s: detach failed"
msgstr "%s: onthechten is mislukt"

#: sys-utils/losetup.c:385
#, c-format
msgid ""
" %1$s [options] [<loopdev>]\n"
" %1$s [options] -f | <loopdev> <file>\n"
msgstr ""
"  %1$s [opties] [<lus-apparaat> | -f]\n"
"  %1$s [opties] <lus-apparaat> <bestand>\n"

#: sys-utils/losetup.c:390
msgid "Set up and control loop devices.\n"
msgstr "Initialiseert en beheert lus-apparaten.\n"

#: sys-utils/losetup.c:394
msgid " -a, --all                     list all used devices\n"
msgstr "  -a, --all                        alle gebruikte lus-apparaten tonen\n"

#: sys-utils/losetup.c:395
msgid " -d, --detach <loopdev>...     detach one or more devices\n"
msgstr "  -d, --detach <lus-apparaat>...   deze apparaten onthechten\n"

#: sys-utils/losetup.c:396
msgid " -D, --detach-all              detach all used devices\n"
msgstr "  -D, --detach-all                 alle gebruikte lus-apparaten onthechten\n"

#: sys-utils/losetup.c:397
msgid " -f, --find                    find first unused device\n"
msgstr "  -f, --find                       eerste ongebruikte lus-apparaat tonen\n"

#: sys-utils/losetup.c:398
msgid " -c, --set-capacity <loopdev>  resize the device\n"
msgstr "  -c, --set-capacity <lus-apparaat>  de grootte van dit apparaat wijzigen\n"

#: sys-utils/losetup.c:399
msgid " -j, --associated <file>       list all devices associated with <file>\n"
msgstr "  -j, --associated <bestand>       gerelateerden aan dit bestand tonen\n"

#: sys-utils/losetup.c:400
msgid " -L, --nooverlap               avoid possible conflict between devices\n"
msgstr "  -L, --nooverlap                  vermijd mogelijke conflicten tussen apparaten\n"

#: sys-utils/losetup.c:404
msgid " -o, --offset <num>            start at offset <num> into file\n"
msgstr "  -o, --offset <getal>      op deze positie in het bestand beginnen\n"

#: sys-utils/losetup.c:405
msgid "     --sizelimit <num>         device is limited to <num> bytes of the file\n"
msgstr "      --sizelimit <getal>   slechts dit aantal bytes van bestand gebruiken\n"

#: sys-utils/losetup.c:406
msgid " -P, --partscan                create a partitioned loop device\n"
msgstr "  -P, --partscan            gepartitioneerd lus-apparaat aanmaken\n"

#: sys-utils/losetup.c:407
msgid " -r, --read-only               set up a read-only loop device\n"
msgstr "  -r, --read-only           een alleen-lezen lus-apparaat instellen\n"

# FIXME: no angles
#: sys-utils/losetup.c:408
msgid "     --direct-io[=<on|off>]    open backing file with O_DIRECT\n"
msgstr "      --direct-io[=on|off]  achterliggend bestand wel/niet met O_DIRECT openen\n"

#: sys-utils/losetup.c:409
msgid "     --show                    print device name after setup (with -f)\n"
msgstr "      --show                apparaatnaam tonen na instellen (met '-f')\n"

#: sys-utils/losetup.c:410
msgid " -v, --verbose                 verbose mode\n"
msgstr "  -v, --verbose             gedetailleerde uitvoer produceren\n"

#: sys-utils/losetup.c:414
msgid " -J, --json                    use JSON --list output format\n"
msgstr "  -J, --json                uitvoer in JSON-opmaak produceren\n"

#: sys-utils/losetup.c:415
msgid " -l, --list                    list info about all or specified (default)\n"
msgstr "  -l, --list                informatie tonen (over alle of gegeven apparaat)\n"

#: sys-utils/losetup.c:416
msgid " -n, --noheadings              don't print headings for --list output\n"
msgstr "  -n, --noheadings          bij '--list' geen kopregel tonen\n"

#: sys-utils/losetup.c:417
msgid " -O, --output <cols>           specify columns to output for --list\n"
msgstr "  -O, --output <lijst>      te tonen kolommen in de uitvoer van '--list'\n"

#: sys-utils/losetup.c:418
msgid "     --raw                     use raw --list output format\n"
msgstr "      --raw                 rauwe uitvoer produceren voor '--list'\n"

#: sys-utils/losetup.c:424
#, fuzzy
msgid ""
"\n"
"Available --output columns:\n"
msgstr ""
"\n"
"Beschikbare kolommen voor '--list':\n"

#: sys-utils/losetup.c:444
#, c-format
msgid "%s: Warning: file is smaller than 512 bytes; the loop device may be useless or invisible for system tools."
msgstr "%s: Waarschuwing: het bestand is kleiner dan 512 bytes -- het lus-apparaat kan onbruikbaar zijn of zelfs onzichtbaar voor systeemprogramma's."

#: sys-utils/losetup.c:448
#, c-format
msgid "%s: Warning: file does not fit into a 512-byte sector; the end of the file will be ignored."
msgstr "%s: Waarschuwing: het bestand past niet in een 512-byte sector -- het einde van het bestand wordt genegeerd."

#: sys-utils/losetup.c:469 sys-utils/losetup.c:521
#, c-format
msgid "%s: overlapping loop device exists"
msgstr "%s: er is een overlappend lus-apparaat"

#: sys-utils/losetup.c:480
#, c-format
msgid "%s: overlapping read-only loop device exists"
msgstr "%s: er is een overlappend alleen-lezen lus-apparaat"

#: sys-utils/losetup.c:487
#, c-format
msgid "%s: overlapping encrypted loop device exists"
msgstr "%s: er is een overlappend versleuteld lus-apparaat"

#: sys-utils/losetup.c:493
#, c-format
msgid "%s: failed to re-use loop device"
msgstr "%s: hergebruik van lus-apparaat is mislukt"

#: sys-utils/losetup.c:499
msgid "failed to inspect loop devices"
msgstr "inspecteren van lus-apparaten is mislukt"

#: sys-utils/losetup.c:522
#, c-format
msgid "%s: failed to check for conflicting loop devices"
msgstr "%s: controle op conflicterende lus-apparaten is mislukt"

#: sys-utils/losetup.c:534 sys-utils/losetup.c:831
msgid "cannot find an unused loop device"
msgstr "kan geen ongebruikt lus-apparaat vinden"

#: sys-utils/losetup.c:544
#, c-format
msgid "%s: failed to use backing file"
msgstr "%s: kan achterliggend bestand niet gebruiken"

#: sys-utils/losetup.c:636 sys-utils/losetup.c:646 sys-utils/losetup.c:758
#: sys-utils/losetup.c:772 sys-utils/losetup.c:811
#, c-format
msgid "%s: failed to use device"
msgstr "%s: gebruik van apparaat is mislukt"

#: sys-utils/losetup.c:769
msgid "no loop device specified"
msgstr "geen lus-apparaat gegeven"

#: sys-utils/losetup.c:784
#, c-format
msgid "the options %s are allowed during loop device setup only"
msgstr "de opties '%s' zijn alleen toegestaan bij instellen van lus-apparaat"

#: sys-utils/losetup.c:789
msgid "the option --offset is not allowed in this context"
msgstr "de optie '--offset' is niet toegestaan in deze context"

#: sys-utils/losetup.c:852
#, c-format
msgid "%s: set capacity failed"
msgstr "%s: instellen van capaciteit is mislukt"

#: sys-utils/losetup.c:859
#, c-format
msgid "%s: set direct io failed"
msgstr "%s: instellen van direct-IO is mislukt"

#: sys-utils/lscpu.c:108
msgid "none"
msgstr "geen"

#: sys-utils/lscpu.c:109
msgid "para"
msgstr "semi"

#: sys-utils/lscpu.c:110
msgid "full"
msgstr "compleet"

#: sys-utils/lscpu.c:111
msgid "container"
msgstr "container"

#: sys-utils/lscpu.c:173
msgid "horizontal"
msgstr "horizontaal"

#: sys-utils/lscpu.c:174
msgid "vertical"
msgstr "verticaal"

#: sys-utils/lscpu.c:347
msgid "logical CPU number"
msgstr "logisch CPU-nummer"

#: sys-utils/lscpu.c:348
msgid "logical core number"
msgstr "logisch kernnummer"

#: sys-utils/lscpu.c:349
msgid "logical socket number"
msgstr "logisch socket-nummer"

#: sys-utils/lscpu.c:350
msgid "logical NUMA node number"
msgstr "logisch NUMA-node-nummer"

#: sys-utils/lscpu.c:351
msgid "logical book number"
msgstr "logisch boeknummer"

#: sys-utils/lscpu.c:352
msgid "logical drawer number"
msgstr "logisch ladenummer"

#: sys-utils/lscpu.c:353
msgid "shows how caches are shared between CPUs"
msgstr "toont hoe caches gedeeld worden tussen CPU's"

#: sys-utils/lscpu.c:354
msgid "CPU dispatching mode on virtual hardware"
msgstr "dispatching-modus van CPU op virtuele hardware"

#: sys-utils/lscpu.c:355
msgid "physical address of a CPU"
msgstr "fysiek adres van een CPU"

#: sys-utils/lscpu.c:356
msgid "shows if the hypervisor has allocated the CPU"
msgstr "toont of de hypervisor de CPU toegewezen heeft"

#: sys-utils/lscpu.c:357
msgid "shows if Linux currently makes use of the CPU"
msgstr "toont of Linux de CPU momenteel gebruikt"

#: sys-utils/lscpu.c:358
msgid "shows the maximum MHz of the CPU"
msgstr "toont de maximale processorfrequentie in MHz"

#: sys-utils/lscpu.c:359
msgid "shows the minimum MHz of the CPU"
msgstr "toont de minimale processorfrequentie in MHz"

#: sys-utils/lscpu.c:551
msgid "error: uname failed"
msgstr "fout: uname() is mislukt"

#: sys-utils/lscpu.c:635
#, c-format
msgid "failed to determine number of CPUs: %s"
msgstr "bepalen van aantal processoren is mislukt: %s"

#: sys-utils/lscpu.c:897
#, fuzzy
msgid "cannot restore signal handler"
msgstr "kan geen signaalverwerker instellen"

#: sys-utils/lscpu.c:958
#, c-format
msgid "failed to read from: %s"
msgstr "lezen van %s is mislukt"

#: sys-utils/lscpu.c:1457
msgid "Failed to extract the node number"
msgstr "kan node-nummer niet achterhalen"

#: sys-utils/lscpu.c:1584 sys-utils/lscpu.c:1594
msgid "Y"
msgstr "J"

#: sys-utils/lscpu.c:1584 sys-utils/lscpu.c:1594
msgid "N"
msgstr "N"

#: sys-utils/lscpu.c:1678
#, c-format
msgid ""
"# The following is the parsable format, which can be fed to other\n"
"# programs. Each different item in every column has an unique ID\n"
"# starting from zero.\n"
msgstr ""
"# Hieronder volgt de ontleedbare uitvoer die als invoer voor\n"
"# andere programma's gebruikt kan worden.  Elk verschillend\n"
"# item in elke kolom heeft een uniek ID, beginnend bij nul.\n"

#: sys-utils/lscpu.c:1873 sys-utils/lsns.c:532 sys-utils/zramctl.c:497
msgid "failed to initialize output column"
msgstr "initialiseren van uitvoerkolom is mislukt"

#: sys-utils/lscpu.c:1875
msgid "Architecture:"
msgstr "Architectuur:"

#: sys-utils/lscpu.c:1888
msgid "CPU op-mode(s):"
msgstr "CPU-modus(sen):"

#: sys-utils/lscpu.c:1891 sys-utils/lscpu.c:1893
msgid "Byte Order:"
msgstr "Bytevolgorde:"

#: sys-utils/lscpu.c:1895
msgid "CPU(s):"
msgstr "CPU's:"

#: sys-utils/lscpu.c:1898
msgid "On-line CPU(s) mask:"
msgstr "Online CPU's-masker:"

#: sys-utils/lscpu.c:1899
msgid "On-line CPU(s) list:"
msgstr "Online CPU's-lijst:"

#: sys-utils/lscpu.c:1918
msgid "Off-line CPU(s) mask:"
msgstr "Offline CPU's-masker:"

#: sys-utils/lscpu.c:1919
msgid "Off-line CPU(s) list:"
msgstr "Offline CPU's-lijst:"

#: sys-utils/lscpu.c:1954
msgid "Thread(s) per core:"
msgstr "Draden per kern:"

#: sys-utils/lscpu.c:1956
msgid "Core(s) per socket:"
msgstr "Kernen per voet:"

#: sys-utils/lscpu.c:1959
msgid "Socket(s) per book:"
msgstr "Voeten per boek:"

#: sys-utils/lscpu.c:1962
msgid "Book(s) per drawer:"
msgstr "Boeken per lade:"

#: sys-utils/lscpu.c:1964
msgid "Drawer(s):"
msgstr "Lades:"

#: sys-utils/lscpu.c:1966
msgid "Book(s):"
msgstr "Boeken:"

#: sys-utils/lscpu.c:1969
msgid "Socket(s):"
msgstr "CPU-voeten:"

#: sys-utils/lscpu.c:1973
msgid "NUMA node(s):"
msgstr "NUMA-nodes:"

#: sys-utils/lscpu.c:1975
msgid "Vendor ID:"
msgstr "Producent-ID:"

#: sys-utils/lscpu.c:1977
msgid "Machine type:"
msgstr "Machinetype:"

#: sys-utils/lscpu.c:1979
msgid "CPU family:"
msgstr "CPU-familie:"

#: sys-utils/lscpu.c:1981
msgid "Model:"
msgstr "Model:"

#: sys-utils/lscpu.c:1983
msgid "Model name:"
msgstr "Modelnaam:"

#: sys-utils/lscpu.c:1985
msgid "Stepping:"
msgstr "Stepping:"

#: sys-utils/lscpu.c:1987
msgid "CPU MHz:"
msgstr "CPU-frequentie (MHz):"

#: sys-utils/lscpu.c:1989
msgid "CPU dynamic MHz:"
msgstr "dynamische CPU-frequentie (MHz):"

#: sys-utils/lscpu.c:1991
msgid "CPU static MHz:"
msgstr "vaste CPU-frequentie (MHz):"

#: sys-utils/lscpu.c:1993
msgid "CPU max MHz:"
msgstr "max. CPU-frequentie (MHz):"

#: sys-utils/lscpu.c:1995
msgid "CPU min MHz:"
msgstr "min. CPU-frequentie (MHz):"

#: sys-utils/lscpu.c:1997
msgid "BogoMIPS:"
msgstr "BogoMIPS:"

#: sys-utils/lscpu.c:2000 sys-utils/lscpu.c:2002
msgid "Virtualization:"
msgstr "Virtualisatie:"

#: sys-utils/lscpu.c:2005
msgid "Hypervisor:"
msgstr "Hypervisor:"

#: sys-utils/lscpu.c:2007
msgid "Hypervisor vendor:"
msgstr "Hypervisorproducent:"

#: sys-utils/lscpu.c:2008
msgid "Virtualization type:"
msgstr "Virtualisatiesoort:"

#: sys-utils/lscpu.c:2011
msgid "Dispatching mode:"
msgstr "Dispatching-modus:"

#: sys-utils/lscpu.c:2015 sys-utils/lscpu.c:2022
#, c-format
msgid "%s cache:"
msgstr "%s-cache:"

#: sys-utils/lscpu.c:2028
#, c-format
msgid "NUMA node%d CPU(s):"
msgstr "NUMA-node%d CPU('s):"

#: sys-utils/lscpu.c:2033
msgid "Physical sockets:"
msgstr "Fysieke voeten:"

#: sys-utils/lscpu.c:2034
msgid "Physical chips:"
msgstr "Fysieke chips:"

#: sys-utils/lscpu.c:2035
msgid "Physical cores/chip:"
msgstr "Fysieke cores/chip:"

#: sys-utils/lscpu.c:2039
msgid "Flags:"
msgstr "Vlaggen:"

#: sys-utils/lscpu.c:2053
msgid "Display information about the CPU architecture.\n"
msgstr "Toont informatie over de processorarchitectuur.\n"

#: sys-utils/lscpu.c:2056
msgid " -a, --all               print both online and offline CPUs (default for -e)\n"
msgstr "  -a, --all               online en offline CPU's tonen (standaard bij '-e')\n"

#: sys-utils/lscpu.c:2057
msgid " -b, --online            print online CPUs only (default for -p)\n"
msgstr "  -b, --online            alleen online CPU's tonen (standaard bij '-p')\n"

#: sys-utils/lscpu.c:2058
msgid " -c, --offline           print offline CPUs only\n"
msgstr "  -c, --offline           alleen offline CPU's tonen\n"

#: sys-utils/lscpu.c:2059
#, fuzzy
msgid " -J, --json              use JSON for default or extended format\n"
msgstr "  -J, --json             uitvoer in JSON-opmaak produceren\n"

#: sys-utils/lscpu.c:2060
msgid " -e, --extended[=<list>] print out an extended readable format\n"
msgstr "  -e, --extended[=LIJST]  uitgebreide, leesbare uitvoer produceren\n"

#: sys-utils/lscpu.c:2061
msgid " -p, --parse[=<list>]    print out a parsable format\n"
msgstr "  -p, --parse[=LIJST]     ontleedbare uitvoer produceren\n"

#: sys-utils/lscpu.c:2062
msgid " -s, --sysroot <dir>     use specified directory as system root\n"
msgstr "  -s, --sysroot MAP       deze map als hoofdmap gebruiken\n"

#: sys-utils/lscpu.c:2063
msgid " -x, --hex               print hexadecimal masks rather than lists of CPUs\n"
msgstr "  -x, --hex               hexadecimale maskers tonen in plaats van lijsten\n"

#: sys-utils/lscpu.c:2064
msgid " -y, --physical          print physical instead of logical IDs\n"
msgstr "  -y, --physical          fysieke in plaats van logische IDs tonen\n"

#: sys-utils/lscpu.c:2169
#, c-format
msgid "%s: options --all, --online and --offline may only be used with options --extended or --parse.\n"
msgstr ""
"%s: de opties '--all', '--online', en '--offline' kunnen\n"
"alleen gebruikt worden samen met '--extended' of '--parse'\n"

#: sys-utils/lsipc.c:149
msgid "Resource key"
msgstr "Hulpbronsleutel"

#: sys-utils/lsipc.c:149
msgid "Key"
msgstr "Sleutel"

#: sys-utils/lsipc.c:150
msgid "Resource ID"
msgstr "Hulpbron-ID"

#: sys-utils/lsipc.c:150
msgid "ID"
msgstr "ID"

#: sys-utils/lsipc.c:151
msgid "Owner's username or UID"
msgstr "Gebruikersnaam of UID van eigenaar"

#: sys-utils/lsipc.c:151
msgid "Owner"
msgstr "Eigenaar"

#: sys-utils/lsipc.c:152
msgid "Permissions"
msgstr "Toegangsrechten"

#: sys-utils/lsipc.c:153
msgid "Creator UID"
msgstr "UID van maker"

#: sys-utils/lsipc.c:154
msgid "Creator user"
msgstr "Makersnaam"

#: sys-utils/lsipc.c:155
msgid "Creator GID"
msgstr "GID van maker"

#: sys-utils/lsipc.c:156
msgid "Creator group"
msgstr "Makersgroep"

#: sys-utils/lsipc.c:157
msgid "User ID"
msgstr "Gebruikers-ID"

#: sys-utils/lsipc.c:157
msgid "UID"
msgstr "UID"

#: sys-utils/lsipc.c:158
msgid "User name"
msgstr "Gebruikersnaam"

#: sys-utils/lsipc.c:159
msgid "Group ID"
msgstr "Groeps-ID"

#: sys-utils/lsipc.c:159
msgid "GID"
msgstr "GID"

#: sys-utils/lsipc.c:160
msgid "Group name"
msgstr "Groepsnaam"

#: sys-utils/lsipc.c:161
msgid "Time of the last change"
msgstr "Tijd van laatste wijziging"

#: sys-utils/lsipc.c:161
msgid "Last change"
msgstr "Laatst gewijzigd"

#: sys-utils/lsipc.c:164
msgid "Bytes used"
msgstr "Gebruikte bytes"

#: sys-utils/lsipc.c:165
msgid "Number of messages"
msgstr "Aantal berichten"

#: sys-utils/lsipc.c:165
msgid "Messages"
msgstr "Berichten"

#: sys-utils/lsipc.c:166
msgid "Time of last msg sent"
msgstr "Verzendtijd van laatste bericht"

#: sys-utils/lsipc.c:166
msgid "Msg sent"
msgstr "Verzonden"

#: sys-utils/lsipc.c:167
msgid "Time of last msg received"
msgstr "Ontvangsttijd van laatste bericht"

#: sys-utils/lsipc.c:167
msgid "Msg received"
msgstr "Ontvangst"

#: sys-utils/lsipc.c:168
msgid "PID of the last msg sender"
msgstr "PID van laatste zender"

#: sys-utils/lsipc.c:168
msgid "Msg sender"
msgstr "Afzender"

#: sys-utils/lsipc.c:169
msgid "PID of the last msg receiver"
msgstr "PID van laatste ontvanger"

#: sys-utils/lsipc.c:169
msgid "Msg receiver"
msgstr "Ontvanger"

#: sys-utils/lsipc.c:172
msgid "Segment size"
msgstr "Segmentgrootte"

#: sys-utils/lsipc.c:173
msgid "Number of attached processes"
msgstr "Aantal aangehechte processen"

#: sys-utils/lsipc.c:173
msgid "Attached processes"
msgstr "Aangehechte processen"

#: sys-utils/lsipc.c:174
msgid "Status"
msgstr "Status"

#: sys-utils/lsipc.c:175
msgid "Attach time"
msgstr "Aangehecht"

#: sys-utils/lsipc.c:176
msgid "Detach time"
msgstr "Onthecht"

#: sys-utils/lsipc.c:177
msgid "Creator command line"
msgstr "Aanmaakopdrachtregel"

#: sys-utils/lsipc.c:177
msgid "Creator command"
msgstr "Aanmaakopdracht"

#: sys-utils/lsipc.c:178
msgid "PID of the creator"
msgstr "PID van de aammaker"

#: sys-utils/lsipc.c:178
msgid "Creator PID"
msgstr "PID van maker"

#: sys-utils/lsipc.c:179
msgid "PID of last user"
msgstr "PID van laatste gebruiker"

#: sys-utils/lsipc.c:179
msgid "Last user PID"
msgstr "Laatste PID"

#: sys-utils/lsipc.c:182
msgid "Number of semaphores"
msgstr "Aantal semaforen"

#: sys-utils/lsipc.c:182
msgid "Semaphores"
msgstr "Semaforen"

#: sys-utils/lsipc.c:183
msgid "Time of the last operation"
msgstr "Tijd van laatste bewerking"

#: sys-utils/lsipc.c:183
msgid "Last operation"
msgstr "Laatste bewerking"

#: sys-utils/lsipc.c:186
msgid "Resource name"
msgstr "Naam van hulpbron"

#: sys-utils/lsipc.c:186
msgid "Resource"
msgstr "Hulpbron"

#: sys-utils/lsipc.c:187
msgid "Resource description"
msgstr "Omschrijving van hulpbron"

#: sys-utils/lsipc.c:187
msgid "Description"
msgstr "Omschrijving"

#: sys-utils/lsipc.c:188
msgid "Currently used"
msgstr "Momenteel gebruikt"

#: sys-utils/lsipc.c:188
msgid "Used"
msgstr "Gebruikt"

# FIXME: grammar
#: sys-utils/lsipc.c:189
msgid "Currently use percentage"
msgstr "Gebruikspercentage"

#: sys-utils/lsipc.c:189
msgid "Use"
msgstr "Geb%"

#: sys-utils/lsipc.c:190
msgid "System-wide limit"
msgstr "Systeemwijde limiet"

#: sys-utils/lsipc.c:190
msgid "Limit"
msgstr "Limiet"

#: sys-utils/lsipc.c:225
#, c-format
msgid "column %s does not apply to the specified IPC"
msgstr "kolom %s is niet van toepassing op de gegeven IPC"

#: sys-utils/lsipc.c:287
msgid " -g, --global      info about system-wide usage (may be used with -m, -q and -s)\n"
msgstr "  -g, --global       info tonen over systeemwijd gebruik (met '-m', '-q' of '-s')\n"

#: sys-utils/lsipc.c:288
msgid " -i, --id <id>     print details on resource identified by <id>\n"
msgstr "  -i, --id <ID>      details weergeven over de met <ID> aangegeven hulpbron\n"

#: sys-utils/lsipc.c:294
msgid " -b, --bytes              print SIZE in bytes rather than in human readable format\n"
msgstr "  -b, --bytes        grootte in bytes weergeven in plaats van in leesbare vorm\n"

#: sys-utils/lsipc.c:295
msgid " -c, --creator            show creator and owner\n"
msgstr "  -c, --creator      aanmaker en eigenaar tonen\n"

#: sys-utils/lsipc.c:297
msgid " -J, --json               use the JSON output format\n"
msgstr "  -J, --json         uitvoer in JSON-opmaak produceren\n"

#: sys-utils/lsipc.c:299
msgid " -l, --list               force list output format (for example with --id)\n"
msgstr "  -l, --list         uitvoer in vorm van lijst afdwingen (b.v. met '--id')\n"

#: sys-utils/lsipc.c:301
msgid " -P, --numeric-perms      print numeric permissions (PERMS column)\n"
msgstr "  -P, --numeric-perms    toegangsrechten numeriek weergeven (PERMS-kolom)\n"

#: sys-utils/lsipc.c:303
msgid " -t, --time               show attach, detach and change times\n"
msgstr "  -t, --time         aanhechtings-, onthechtings- en wijzigingstijden tonen\n"

#: sys-utils/lsipc.c:309
#, c-format
msgid ""
"\n"
"Generic columns:\n"
msgstr ""
"\n"
"Algemene kolommen:\n"

#: sys-utils/lsipc.c:313
#, c-format
msgid ""
"\n"
"Shared-memory columns (--shmems):\n"
msgstr ""
"\n"
"Kolommen voor gedeeld geheugen (--shmems):\n"

#: sys-utils/lsipc.c:317
#, c-format
msgid ""
"\n"
"Message-queue columns (--queues):\n"
msgstr ""
"\n"
"Kolommen voor berichtwachtrijen (--queues):\n"

#: sys-utils/lsipc.c:321
#, c-format
msgid ""
"\n"
"Semaphore columns (--semaphores):\n"
msgstr ""
"\n"
"Kolommen voor semaforen (--semaphores):\n"

#: sys-utils/lsipc.c:325
#, c-format
msgid ""
"\n"
"Summary columns (--global):\n"
msgstr ""
"\n"
"Samenvattingskolommen (--global):\n"

#: sys-utils/lsipc.c:414
#, c-format
msgid ""
"Elements:\n"
"\n"
msgstr ""
"Elementen:\n"
"\n"

#: sys-utils/lsipc.c:687 sys-utils/lsipc.c:848 sys-utils/lsipc.c:1047
msgid "failed to set data"
msgstr "instellen van gegevens is mislukt"

#: sys-utils/lsipc.c:712
msgid "Number of semaphore identifiers"
msgstr "Aantal semafooridentifiers"

#: sys-utils/lsipc.c:713
msgid "Total number of semaphores"
msgstr "Totaal aantal semaforen"

# FIXME: period?
#: sys-utils/lsipc.c:714
msgid "Max semaphores per semaphore set."
msgstr "Maximum aantal semaforen per semafoorset"

#: sys-utils/lsipc.c:715
msgid "Max number of operations per semop(2)"
msgstr "Maximum aantal bewerkingen per semop(2)"

#: sys-utils/lsipc.c:716
msgid "Semaphore max value"
msgstr "Maximale semafoorwaarde"

#: sys-utils/lsipc.c:873
msgid "Number of message queues"
msgstr "Aantal berichtwachtrijen"

#: sys-utils/lsipc.c:874
msgid "Max size of message (bytes)"
msgstr "Maximumgrootte van bericht (bytes)"

#: sys-utils/lsipc.c:875
msgid "Default max size of queue (bytes)"
msgstr "Standaard-maximumgrootte van wachtrij (bytes)"

#: sys-utils/lsipc.c:989 sys-utils/lsipc.c:1008
msgid "hugetlb"
msgstr ""

#: sys-utils/lsipc.c:990 sys-utils/lsipc.c:1015
msgid "noreserve"
msgstr ""

#: sys-utils/lsipc.c:1072
msgid "Shared memory segments"
msgstr "Gedeeldgeheugen-segmenten"

#: sys-utils/lsipc.c:1073
msgid "Shared memory pages"
msgstr "Gedeeldgeheugen-pagina's"

#: sys-utils/lsipc.c:1074
msgid "Max size of shared memory segment (bytes)"
msgstr "maximumgrootte van gedeelde geheugensegmenten (bytes)"

#: sys-utils/lsipc.c:1075
msgid "Min size of shared memory segment (bytes)"
msgstr "minimumgrootte van gedeelde geheugensegmenten (bytes)"

#: sys-utils/lsipc.c:1145
msgid "failed to parse IPC identifier"
msgstr "ontleden van IPC-identifier is mislukt"

#: sys-utils/lsipc.c:1239
msgid "--global is mutually exclusive with --creator, --id and --time"
msgstr "optie '--global' gaat niet samen met '--creator', '--id' of '--time'"

#: sys-utils/lsmem.c:99
msgid "start and end address of the memory range"
msgstr ""

#: sys-utils/lsmem.c:100
#, fuzzy
msgid "size of the memory range"
msgstr "apparaatgrootte"

#: sys-utils/lsmem.c:101
msgid "online status of the memory range"
msgstr ""

#: sys-utils/lsmem.c:102
#, fuzzy
msgid "memory is removable"
msgstr " verwijderbaar"

#: sys-utils/lsmem.c:103
msgid "memory block number or blocks range"
msgstr ""

#: sys-utils/lsmem.c:104
#, fuzzy
msgid "numa node of memory"
msgstr "onvoldoende geheugen beschikbaar"

#: sys-utils/lsmem.c:193
#, fuzzy
msgid "online"
msgstr ", staat aan"

#: sys-utils/lsmem.c:194
#, fuzzy
msgid "offline"
msgstr ", staat aan"

#: sys-utils/lsmem.c:195
msgid "on->off"
msgstr ""

#: sys-utils/lsmem.c:235 sys-utils/lsmem.c:239
#, fuzzy
msgid "Memory block size:"
msgstr "blokgrootte tonen"

#: sys-utils/lsmem.c:236 sys-utils/lsmem.c:241
#, fuzzy
msgid "Total online memory:"
msgstr "onvoldoende geheugen beschikbaar"

#: sys-utils/lsmem.c:237 sys-utils/lsmem.c:243
#, fuzzy
msgid "Total offline memory:"
msgstr "onvoldoende geheugen beschikbaar"

#: sys-utils/lsmem.c:259
#, fuzzy, c-format
msgid "Failed to open %s"
msgstr "openen van %s is mislukt"

#: sys-utils/lsmem.c:354
#, fuzzy
msgid "This system does not support memory blocks"
msgstr "Dit systeem ondersteunt het herscannen van CPU's niet"

#: sys-utils/lsmem.c:374
msgid "List the ranges of available memory with their online status.\n"
msgstr ""

#: sys-utils/lsmem.c:379
#, fuzzy
msgid " -a, --all            list each individiual memory block\n"
msgstr "  -a, --all             alle apparaten tonen\n"

#: sys-utils/lsmem.c:384
#, fuzzy
msgid " -s, --sysroot <dir>  use the specified directory as system root\n"
msgstr "  -s, --sysroot MAP       deze map als hoofdmap gebruiken\n"

#: sys-utils/lsmem.c:385
msgid "     --summary[=when] print summary information (never,always or only)\n"
msgstr ""

#: sys-utils/lsmem.c:488
#, fuzzy
msgid "unsupported --summary argument"
msgstr "niet-ondersteund argument van '--setgroups': '%s'"

#: sys-utils/lsmem.c:501
#, fuzzy
msgid "options --{raw,json,pairs} and --summary=only are mutually exclusive"
msgstr "opties '--setgroups=allow' en '--map-root-user' gaan niet samen"

#: sys-utils/lsmem.c:532 sys-utils/lsns.c:511
msgid "failed to initialize output table"
msgstr "initialiseren van uitvoertabel is mislukt"

#: sys-utils/lsmem.c:544
#, fuzzy
msgid "Failed to initialize output column"
msgstr "initialiseren van uitvoerkolom is mislukt"

#: sys-utils/lsns.c:83
msgid "namespace identifier (inode number)"
msgstr "naamsruimte-identifier (inodenummer)"

#: sys-utils/lsns.c:84
msgid "kind of namespace"
msgstr "soort naamsruimte"

#: sys-utils/lsns.c:85
msgid "path to the namespace"
msgstr "pad naar de naamsruimte"

#: sys-utils/lsns.c:86
msgid "number of processes in the namespace"
msgstr "aantal processen in de naamsruimte"

#: sys-utils/lsns.c:87
msgid "lowest PID in the namespace"
msgstr "laagste PID in de naamsruimte"

#: sys-utils/lsns.c:88
msgid "PPID of the PID"
msgstr "PPID van de PID"

#: sys-utils/lsns.c:89
msgid "command line of the PID"
msgstr "opdrachtregel van de PID"

#: sys-utils/lsns.c:90
msgid "UID of the PID"
msgstr "UID van de PID"

#: sys-utils/lsns.c:91
msgid "username of the PID"
msgstr "gebruikersnaam van de PID"

#: sys-utils/lsns.c:456
msgid "failed to add line to output"
msgstr "toevoegen van regel aan uitvoer is mislukt"

#: sys-utils/lsns.c:613
#, c-format
msgid " %s [options] [<namespace>]\n"
msgstr "  %s [opties] [<naamsruimte>]\n"

#: sys-utils/lsns.c:616
msgid "List system namespaces.\n"
msgstr "Somt de naamsruimtes in het systeem op.\n"

#: sys-utils/lsns.c:623
msgid " -p, --task <pid>       print process namespaces\n"
msgstr "  -p, --task <PID>       procesnaamsruimten tonen\n"

#: sys-utils/lsns.c:626
#, fuzzy
msgid " -t, --type <name>      namespace type (mnt, net, ipc, user, pid, uts, cgroup)\n"
msgstr "  -t, --type <naam>      soort naamsruimte (mnt, net, ipc, user, pid, uts)\n"

#: sys-utils/lsns.c:716
#, c-format
msgid "unknown namespace type: %s"
msgstr "onbekend soort naamsruimte: %s"

#: sys-utils/lsns.c:734
msgid "--task is mutually exclusive with <namespace>"
msgstr "optie '--task' gaat niet samen met <naamsruimte>"

#: sys-utils/lsns.c:735
msgid "invalid namespace argument"
msgstr "ongeldig naamsruimteargument"

#: sys-utils/lsns.c:773
#, c-format
msgid "not found namespace: %ju"
msgstr "niet gevonden naamsruimte: %ju"

#: sys-utils/mount.c:63 sys-utils/umount.c:116
#, c-format
msgid "only root can use \"--%s\" option (effective UID is %u)"
msgstr "alleen root kan optie '--%s' gebruiken  (effectieve UID is %u)"

#: sys-utils/mount.c:66 sys-utils/umount.c:119
#, c-format
msgid "only root can do that (effective UID is %u)"
msgstr "alleen root kan dat doen  (effectieve UID is %u)"

#: sys-utils/mount.c:70 sys-utils/umount.c:123
#, c-format
msgid "only root can use \"--%s\" option"
msgstr "alleen root kan optie '--%s' gebruiken"

#: sys-utils/mount.c:71 sys-utils/umount.c:124
msgid "only root can do that"
msgstr "alleen root kan dat doen"

# FIXME: parenthesis?
#: sys-utils/mount.c:82 sys-utils/umount.c:58
#, c-format
msgid "%s from %s (libmount %s"
msgstr "'%s' uit %s (libmount %s)"

#: sys-utils/mount.c:127
msgid "failed to read mtab"
msgstr "lezen van mtab is mislukt"

#: sys-utils/mount.c:189 sys-utils/umount.c:180
#, c-format
msgid "%-25s: ignored\n"
msgstr "%-25s: genegeerd\n"

#: sys-utils/mount.c:190
#, c-format
msgid "%-25s: already mounted\n"
msgstr "%-25s: is al aangekoppeld\n"

#: sys-utils/mount.c:246
#, c-format
msgid "%s: %s moved to %s.\n"
msgstr "%s: %s is verplaatst naar %s\n"

#: sys-utils/mount.c:248
#, c-format
msgid "%s: %s bound on %s.\n"
msgstr "%s: %s is ingebonden op %s\n"

#: sys-utils/mount.c:251 sys-utils/mount.c:255
#, c-format
msgid "%s: %s mounted on %s.\n"
msgstr "%s: %s is aangekoppeld op %s\n"

#: sys-utils/mount.c:253
#, c-format
msgid "%s: %s propagation flags changed.\n"
msgstr "%s: %s doorgavevlaggen zijn gewijzigd.\n"

#: sys-utils/mount.c:273
#, c-format
msgid ""
"mount: %s does not contain SELinux labels.\n"
"       You just mounted an file system that supports labels which does not\n"
"       contain labels, onto an SELinux box. It is likely that confined\n"
"       applications will generate AVC messages and not be allowed access to\n"
"       this file system.  For more details see restorecon(8) and mount(8).\n"
msgstr ""
"mount: %s bevat geen SELinux-labels.\n"
"    U hebt zojuist op een SELinux-computer een bestandssysteem aangekoppeld dat\n"
"    labels ondersteunt maar er geen bevat.  Waarschijnlijk zullen ingeperkte\n"
"    programma's AVC-berichten genereren en geen toegang tot dit bestandssysteem\n"
"    kunnen krijgen.  Voor meer details zie restorecon(8) en mount(8).\n"

# FIXME: don't gettextize
#: sys-utils/mount.c:305 sys-utils/umount.c:157
#, fuzzy, c-format
msgid "%s: %s."
msgstr "%15s: %s"

# FIXME: failed to parse WHAT?
#: sys-utils/mount.c:331
#, c-format
msgid "%s: failed to parse"
msgstr "%s: ontleden is mislukt"

#: sys-utils/mount.c:370
#, c-format
msgid "unsupported option format: %s"
msgstr "ongeldige optie-opmaak: %s"

#: sys-utils/mount.c:372
#, c-format
msgid "failed to append option '%s'"
msgstr "het achtervoegen van optie '%s' is mislukt"

#: sys-utils/mount.c:389
#, c-format
msgid ""
" %1$s [-lhV]\n"
" %1$s -a [options]\n"
" %1$s [options] [--source] <source> | [--target] <directory>\n"
" %1$s [options] <source> <directory>\n"
" %1$s <operation> <mountpoint> [<target>]\n"
msgstr ""
"  %1$s [-hlV] | -a [opties]\n"
"  %1$s [opties] [--source] <bron> | [--target] <map>\n"
"  %1$s [opties] <bron> <map>\n"
"  %1$s <bewerking> <aankoppelingspunt> [<doel>]\n"

#: sys-utils/mount.c:397
msgid "Mount a filesystem.\n"
msgstr "Koppelt een bestandssysteem aan.\n"

#: sys-utils/mount.c:401
#, c-format
msgid ""
" -a, --all               mount all filesystems mentioned in fstab\n"
" -c, --no-canonicalize   don't canonicalize paths\n"
" -f, --fake              dry run; skip the mount(2) syscall\n"
" -F, --fork              fork off for each device (use with -a)\n"
" -T, --fstab <path>      alternative file to /etc/fstab\n"
msgstr ""

#: sys-utils/mount.c:407
#, c-format
msgid " -i, --internal-only     don't call the mount.<type> helpers\n"
msgstr "  -i, --internal-only       niet de 'umount.<type>' hulpprogramma's gebruiken\n"

#: sys-utils/mount.c:409
#, c-format
msgid " -l, --show-labels       show also filesystem labels\n"
msgstr "  -l, --show-labels         ook de labels van bestandssystemen tonen\n"

#: sys-utils/mount.c:411 sys-utils/umount.c:91
#, c-format
msgid " -n, --no-mtab           don't write to /etc/mtab\n"
msgstr "  -n, --no-mtab             niet naar /etc/mtab schrijven\n"

#: sys-utils/mount.c:413
#, c-format
msgid ""
" -o, --options <list>    comma-separated list of mount options\n"
" -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
" -r, --read-only         mount the filesystem read-only (same as -o ro)\n"
" -t, --types <list>      limit the set of filesystem types\n"
msgstr ""

#: sys-utils/mount.c:418
#, c-format
msgid ""
"     --source <src>      explicitly specifies source (path, label, uuid)\n"
"     --target <target>   explicitly specifies mountpoint\n"
msgstr ""

#: sys-utils/mount.c:421 sys-utils/umount.c:97
#, c-format
msgid " -v, --verbose           say what is being done\n"
msgstr "  -v, --verbose             tonen wat er gedaan wordt\n"

#: sys-utils/mount.c:423
#, c-format
msgid " -w, --rw, --read-write  mount the filesystem read-write (default)\n"
msgstr "  -w, --rw, --read-write    bestandssysteem aankoppelen als lezen-schrijven\n"

#: sys-utils/mount.c:430
#, c-format
msgid ""
"\n"
"Source:\n"
" -L, --label <label>     synonym for LABEL=<label>\n"
" -U, --uuid <uuid>       synonym for UUID=<uuid>\n"
" LABEL=<label>           specifies device by filesystem label\n"
" UUID=<uuid>             specifies device by filesystem UUID\n"
" PARTLABEL=<label>       specifies device by partition label\n"
" PARTUUID=<uuid>         specifies device by partition UUID\n"
msgstr ""

#: sys-utils/mount.c:439
#, c-format
msgid ""
" <device>                specifies device by path\n"
" <directory>             mountpoint for bind mounts (see --bind/rbind)\n"
" <file>                  regular file for loopdev setup\n"
msgstr ""

#: sys-utils/mount.c:444
#, c-format
msgid ""
"\n"
"Operations:\n"
" -B, --bind              mount a subtree somewhere else (same as -o bind)\n"
" -M, --move              move a subtree to some other place\n"
" -R, --rbind             mount a subtree and all submounts somewhere else\n"
msgstr ""

#: sys-utils/mount.c:449
#, c-format
msgid ""
" --make-shared           mark a subtree as shared\n"
" --make-slave            mark a subtree as slave\n"
" --make-private          mark a subtree as private\n"
" --make-unbindable       mark a subtree as unbindable\n"
msgstr ""

#: sys-utils/mount.c:454
#, c-format
msgid ""
" --make-rshared          recursively mark a whole subtree as shared\n"
" --make-rslave           recursively mark a whole subtree as slave\n"
" --make-rprivate         recursively mark a whole subtree as private\n"
" --make-runbindable      recursively mark a whole subtree as unbindable\n"
msgstr ""

#: sys-utils/mount.c:540 sys-utils/umount.c:444
msgid "libmount context allocation failed"
msgstr "geheugenreservering voor libmount-context is mislukt"

#: sys-utils/mount.c:597 sys-utils/umount.c:497
msgid "failed to set options pattern"
msgstr "het instellen van het opties-patroon is mislukt"

#: sys-utils/mount.c:749
msgid "source specified more than once"
msgstr "bron is meer dan eens gegeven"

#: sys-utils/mountpoint.c:118
#, c-format
msgid ""
" %1$s [-qd] /path/to/directory\n"
" %1$s -x /dev/device\n"
msgstr ""
"  %1$s [-qd] /pad/naar/map\n"
"  %1$s -x /dev/apparaat\n"

#: sys-utils/mountpoint.c:122
msgid "Check whether a directory or file is a mountpoint.\n"
msgstr "Controleert of een map of bestand een aankoppelingspunt is.\n"

#: sys-utils/mountpoint.c:125
msgid ""
" -q, --quiet        quiet mode - don't print anything\n"
" -d, --fs-devno     print maj:min device number of the filesystem\n"
" -x, --devno        print maj:min device number of the block device\n"
msgstr ""
"  -q, --quiet       stille modus; niets weergeven\n"
"  -d, --fs-devno    hoofd-:subapparaatnummer van bestandssysteem tonen\n"
"  -x, --devno       hoofd-:subapparaatnummer van blok-apparaat tonen\n"

#: sys-utils/mountpoint.c:194
#, c-format
msgid "%s is not a mountpoint\n"
msgstr "%s is geen aankoppelingspunt\n"

#: sys-utils/mountpoint.c:200
#, c-format
msgid "%s is a mountpoint\n"
msgstr "%s is een aankoppelingspunt\n"

#: sys-utils/nsenter.c:73 sys-utils/setarch.c:93 sys-utils/unshare.c:246
#, c-format
msgid " %s [options] [<program> [<argument>...]]\n"
msgstr "  %s [opties] [<programma> [<argument>...]]\n"

#: sys-utils/nsenter.c:77
msgid "Run a program with namespaces of other processes.\n"
msgstr "Draait een programma met de naamsruimtes van andere processen.\n"

#: sys-utils/nsenter.c:80
#, fuzzy
msgid " -a, --all              enter all namespaces\n"
msgstr "  -a, --all             alle apparaten tonen\n"

#: sys-utils/nsenter.c:81
msgid " -t, --target <pid>     target process to get namespaces from\n"
msgstr "  -t, --target <PID>       naamsruimtes overnemen van dit proces\n"

#: sys-utils/nsenter.c:82
msgid " -m, --mount[=<file>]   enter mount namespace\n"
msgstr "  -m, --mount[=<bestand>]  aankoppelingsnaamsruimte binnengaan\n"

#: sys-utils/nsenter.c:83
msgid " -u, --uts[=<file>]     enter UTS namespace (hostname etc)\n"
msgstr "  -u, --uts[=<bestand>]    UTS-naamsruimte binnengaan (hostnaam en dergelijke)\n"

#: sys-utils/nsenter.c:84
msgid " -i, --ipc[=<file>]     enter System V IPC namespace\n"
msgstr "  -i, --ipc[=<bestand>]    System-V-IPC-naamsruimte binnengaan\n"

#: sys-utils/nsenter.c:85
msgid " -n, --net[=<file>]     enter network namespace\n"
msgstr "  -n, --net[=<bestand>]    netwerknaamsruimte binnengaan\n"

#: sys-utils/nsenter.c:86
msgid " -p, --pid[=<file>]     enter pid namespace\n"
msgstr "  -p, --pid[=<bestand>]    PID-naamsruimte binnengaan\n"

#: sys-utils/nsenter.c:87
msgid " -C, --cgroup[=<file>]  enter cgroup namespace\n"
msgstr "  -C, --cgroup[=<bestand>] controlgroepnaamsruimte binnengaan\n"

#: sys-utils/nsenter.c:88
msgid " -U, --user[=<file>]    enter user namespace\n"
msgstr "  -U, --user[=<bestand>]   gebruikersnaamsruimte binnengaan\n"

#: sys-utils/nsenter.c:89
msgid " -S, --setuid <uid>     set uid in entered namespace\n"
msgstr "  -S, --setuid <UID>       deze UID in binnengegane naamsruimte instellen\n"

#: sys-utils/nsenter.c:90
msgid " -G, --setgid <gid>     set gid in entered namespace\n"
msgstr "  -G, --setgid <GID>       deze GID in binnengegane naamsruimte instellen\n"

#: sys-utils/nsenter.c:91
msgid "     --preserve-credentials do not touch uids or gids\n"
msgstr "      --preserve-credentials   geen UID's noch GID's wijzigen\n"

#: sys-utils/nsenter.c:92
msgid " -r, --root[=<dir>]     set the root directory\n"
msgstr "  -r, --root[=<map>]       te gebruiken hoofdmap\n"

#: sys-utils/nsenter.c:93
msgid " -w, --wd[=<dir>]       set the working directory\n"
msgstr "  -w, --wd[=<map>]         te gebruiken werkmap\n"

#: sys-utils/nsenter.c:94
msgid " -F, --no-fork          do not fork before exec'ing <program>\n"
msgstr "  -F, --no-fork            geen nieuw proces aanmaken voor <programma>\n"

#: sys-utils/nsenter.c:96
msgid " -Z, --follow-context   set SELinux context according to --target PID\n"
msgstr "  -Z, --follow-context   de SELinux-context instellen volgens PID van '--target'\n"

#: sys-utils/nsenter.c:122
#, c-format
msgid "neither filename nor target pid supplied for %s"
msgstr "noch een bestandsnaam noch een doel-PID gegeven voor %s"

#: sys-utils/nsenter.c:310
msgid "failed to parse uid"
msgstr "ontleden van UID is mislukt"

#: sys-utils/nsenter.c:314
msgid "failed to parse gid"
msgstr "ontleden van GID is mislukt"

#: sys-utils/nsenter.c:350
msgid "no target PID specified for --follow-context"
msgstr "geen doel-PID gegeven voor '--follow-context'"

#: sys-utils/nsenter.c:352
#, c-format
msgid "failed to get %d SELinux context"
msgstr "kan %d SELinux-context niet verkrijgen"

#: sys-utils/nsenter.c:355
#, c-format
msgid "failed to set exec context to '%s'"
msgstr "instellen van uitvoeringscontext op '%s' is mislukt"

#: sys-utils/nsenter.c:362
#, fuzzy
msgid "no target PID specified for --all"
msgstr "geen doel-PID gegeven voor '--follow-context'"

#: sys-utils/nsenter.c:426
#, c-format
msgid "reassociate to namespace '%s' failed"
msgstr "herassociatie met naamsruimte '%s' is mislukt"

#: sys-utils/nsenter.c:442
msgid "cannot open current working directory"
msgstr "kan huidige werkmap niet openen"

#: sys-utils/nsenter.c:449
msgid "change directory by root file descriptor failed"
msgstr "wijzigen van huidige map via hoofdmap-bestandsdescriptor is mislukt"

#: sys-utils/nsenter.c:452
msgid "chroot failed"
msgstr "'chroot' is mislukt"

#: sys-utils/nsenter.c:462
msgid "change directory by working directory file descriptor failed"
msgstr "wijzigen van huidige map via werkmap-bestandsdescriptor is mislukt"

#: sys-utils/nsenter.c:473 sys-utils/setpriv.c:813 sys-utils/setpriv.c:817
msgid "setgroups failed"
msgstr "'setgroups' is mislukt"

#: sys-utils/pivot_root.c:33
#, c-format
msgid " %s [options] new_root put_old\n"
msgstr "  %s [opties] nieuwe_hoofdmap oude_hoofdmap\n"

#: sys-utils/pivot_root.c:37
msgid "Change the root filesystem.\n"
msgstr "Wijzigt het root-bestandssysteem.\n"

# FIXME: backticks
#: sys-utils/pivot_root.c:75
#, c-format
msgid "failed to change root from `%s' to `%s'"
msgstr "wijzigen van hoofdmap van '%s' naar '%s' is mislukt"

#: sys-utils/prlimit.c:75
msgid "address space limit"
msgstr "adresruimtelimiet"

#: sys-utils/prlimit.c:76
msgid "max core file size"
msgstr "maximum grootte van coredump-bestand"

#: sys-utils/prlimit.c:77
msgid "CPU time"
msgstr "CPU-tijd"

#: sys-utils/prlimit.c:77
msgid "seconds"
msgstr "seconden"

#: sys-utils/prlimit.c:78
msgid "max data size"
msgstr "maximum gegevensgrootte"

#: sys-utils/prlimit.c:79
msgid "max file size"
msgstr "maximum bestandsgrootte"

#: sys-utils/prlimit.c:80
msgid "max number of file locks held"
msgstr "maximum aantal bestandsvergrendelingen"

#: sys-utils/prlimit.c:80
msgid "locks"
msgstr "vergrendelingen"

#: sys-utils/prlimit.c:81
msgid "max locked-in-memory address space"
msgstr "maximum vastgezette geheugenruimte"

#: sys-utils/prlimit.c:82
msgid "max bytes in POSIX mqueues"
msgstr "maximum aantal bytes in POSIX-berichtenwachtrijen"

#: sys-utils/prlimit.c:83
msgid "max nice prio allowed to raise"
msgstr "maximum toegestane beleefdheidsverlaging"

#: sys-utils/prlimit.c:84
msgid "max number of open files"
msgstr "maximum aantal open bestanden"

#: sys-utils/prlimit.c:84
msgid "files"
msgstr "bestanden"

#: sys-utils/prlimit.c:85
msgid "max number of processes"
msgstr "maximum aantal processen"

#: sys-utils/prlimit.c:85
msgid "processes"
msgstr "processen"

#: sys-utils/prlimit.c:86
msgid "max resident set size"
msgstr "maximum resident geheugengebruik"

#: sys-utils/prlimit.c:87
msgid "max real-time priority"
msgstr "maximum realtime-prioriteit"

#: sys-utils/prlimit.c:88
msgid "timeout for real-time tasks"
msgstr "tijdslimiet voor realtime-taken"

#: sys-utils/prlimit.c:88
msgid "microsecs"
msgstr "microseconden"

#: sys-utils/prlimit.c:89
msgid "max number of pending signals"
msgstr "maximum aantal wachtende signalen"

#: sys-utils/prlimit.c:89
msgid "signals"
msgstr "signalen"

#: sys-utils/prlimit.c:90
msgid "max stack size"
msgstr "maximum stack-grootte"

#: sys-utils/prlimit.c:123
msgid "resource name"
msgstr "naam van hulpbron"

#: sys-utils/prlimit.c:124
msgid "resource description"
msgstr "omschrijving van hulpbron"

#: sys-utils/prlimit.c:125
msgid "soft limit"
msgstr "zachte grens"

#: sys-utils/prlimit.c:126
msgid "hard limit (ceiling)"
msgstr "harde grens (plafond)"

#: sys-utils/prlimit.c:127
msgid "units"
msgstr "eenheid"

#: sys-utils/prlimit.c:161
#, c-format
msgid " %s [options] [-p PID]\n"
msgstr "  %s [opties] [-p PID]\n"

#: sys-utils/prlimit.c:163
#, c-format
msgid " %s [options] COMMAND\n"
msgstr "  %s [opties] OPDRACHT\n"

#: sys-utils/prlimit.c:166
msgid "Show or change the resource limits of a process.\n"
msgstr "Toont of wijzigt de hulpbrongrenzen van een proces.\n"

#: sys-utils/prlimit.c:168
msgid ""
"\n"
"General Options:\n"
msgstr ""
"\n"
"Algemene opties:\n"

#: sys-utils/prlimit.c:169
msgid ""
" -p, --pid <pid>        process id\n"
" -o, --output <list>    define which output columns to use\n"
"     --noheadings       don't print headings\n"
"     --raw              use the raw output format\n"
"     --verbose          verbose output\n"
" -h, --help             display this help and exit\n"
" -V, --version          output version information and exit\n"
msgstr ""
"  -p, --pid <pid>         alleen limieten van dit proces tonen\n"
"  -o, --output <lijst>    te tonen uitvoerkolommen\n"
"      --noheadings        geen kolomkoppen weergeven\n"
"      --raw               rauwe uitvoeropmaak gebruiken\n"
"      --verbose           gedetailleerdere uitvoer produceren\n"
"  -h, --help              deze hulptekst tonen en stoppen\n"
"  -V, --version           programmaversie tonen en stoppen\n"

#: sys-utils/prlimit.c:177
msgid ""
"\n"
"Resources Options:\n"
msgstr ""
"\n"
"Hulpbronopties:\n"

# FIXME: slice it up
#: sys-utils/prlimit.c:178
msgid ""
" -c, --core             maximum size of core files created\n"
" -d, --data             maximum size of a process's data segment\n"
" -e, --nice             maximum nice priority allowed to raise\n"
" -f, --fsize            maximum size of files written by the process\n"
" -i, --sigpending       maximum number of pending signals\n"
" -l, --memlock          maximum size a process may lock into memory\n"
" -m, --rss              maximum resident set size\n"
" -n, --nofile           maximum number of open files\n"
" -q, --msgqueue         maximum bytes in POSIX message queues\n"
" -r, --rtprio           maximum real-time scheduling priority\n"
" -s, --stack            maximum stack size\n"
" -t, --cpu              maximum amount of CPU time in seconds\n"
" -u, --nproc            maximum number of user processes\n"
" -v, --as               size of virtual memory\n"
" -x, --locks            maximum number of file locks\n"
" -y, --rttime           CPU time in microseconds a process scheduled\n"
"                        under real-time scheduling\n"
msgstr ""

#: sys-utils/prlimit.c:243 sys-utils/prlimit.c:249 sys-utils/prlimit.c:365
#: sys-utils/prlimit.c:370
msgid "unlimited"
msgstr "onbegrensd"

#: sys-utils/prlimit.c:331
#, c-format
msgid "failed to get old %s limit"
msgstr "opvragen van oude limiet voor %s is mislukt"

#: sys-utils/prlimit.c:355
#, c-format
msgid "the soft limit %s cannot exceed the hard limit"
msgstr "zachte grens %s mag niet groter zijn dan de harde grens"

# FIXME: oooh, come on, don't use fill-in words!
#: sys-utils/prlimit.c:362
#, c-format
msgid "New %s limit for pid %d: "
msgstr "Nieuwe %s-grens voor PID %d: "

#: sys-utils/prlimit.c:377
#, c-format
msgid "failed to set the %s resource limit"
msgstr "instellen van hulpbrongrens %s is mislukt"

#: sys-utils/prlimit.c:378
#, c-format
msgid "failed to get the %s resource limit"
msgstr "opvragen van hulpbrongrens %s is mislukt"

#: sys-utils/prlimit.c:455
#, c-format
msgid "failed to parse %s limit"
msgstr "ontleden van grens %s is mislukt"

#: sys-utils/prlimit.c:584
msgid "option --pid may be specified only once"
msgstr "optie '--pid' mag slechts één keer gegeven worden"

#: sys-utils/prlimit.c:614
msgid "options --pid and COMMAND are mutually exclusive"
msgstr "optie '--pid' en een OPDRACHT gaan niet samen"

#: sys-utils/readprofile.c:107
msgid "Display kernel profiling information.\n"
msgstr "Toont profileringsinformatie van de kernel.\n"

# FIXME: one single string!
#: sys-utils/readprofile.c:111
#, c-format
msgid " -m, --mapfile <mapfile>   (defaults: \"%s\" and\n"
msgstr "  -m, --mapfile <bestand>   (standaard zijn: '%s en\n"

#: sys-utils/readprofile.c:113
#, c-format
msgid "                                      \"%s\")\n"
msgstr "                                             '%s')\n"

#: sys-utils/readprofile.c:115
#, c-format
msgid " -p, --profile <pro-file>  (default:  \"%s\")\n"
msgstr "  -p, --profile <bestand>   (standaard is:  '%s')\n"

#: sys-utils/readprofile.c:116
msgid " -M, --multiplier <mult>   set the profiling multiplier to <mult>\n"
msgstr "  -M, --multiplier <maal>   te gebruiken profileringsversneller\n"

#: sys-utils/readprofile.c:117
msgid " -i, --info                print only info about the sampling step\n"
msgstr "  -i, --info                alleen info over de sonderingsstap tonen \n"

#: sys-utils/readprofile.c:118
msgid " -v, --verbose             print verbose data\n"
msgstr "  -v, --verbose             gedetailleerde uitvoer produceren\n"

#: sys-utils/readprofile.c:119
msgid " -a, --all                 print all symbols, even if count is 0\n"
msgstr "  -a, --all                 alle symbolen tonen, zelfs als aantal nul is\n"

#: sys-utils/readprofile.c:120
msgid " -b, --histbin             print individual histogram-bin counts\n"
msgstr "  -b, --histbin             individuele aantallen tonen voor histogram-bin\n"

#: sys-utils/readprofile.c:121
msgid " -s, --counters            print individual counters within functions\n"
msgstr "  -s, --counters            individuele tellers tonen binnen functies\n"

#: sys-utils/readprofile.c:122
msgid " -r, --reset               reset all the counters (root only)\n"
msgstr "  -r, --reset               alle tellers terugzetten (alleen door root)\n"

#: sys-utils/readprofile.c:123
msgid " -n, --no-auto             disable byte order auto-detection\n"
msgstr "  -n, --no-auto             automatische bytevolgordedetectie uitschakelen\n"

#: sys-utils/readprofile.c:240
#, c-format
msgid "error writing %s"
msgstr "fout bij schrijven van %s"

#: sys-utils/readprofile.c:271
msgid "Assuming reversed byte order. Use -n to force native byte order."
msgstr ""
"Omgekeerde byte-volgorde wordt aangenomen.\n"
"Gebruik '-n' om de normale byte-volgorde te gebruiken."

#: sys-utils/readprofile.c:286
#, c-format
msgid "Sampling_step: %u\n"
msgstr "Bemonsteringsstap: %u\n"

#: sys-utils/readprofile.c:302 sys-utils/readprofile.c:323
#, c-format
msgid "%s(%i): wrong map line"
msgstr "%s(%i): foutieve regel in symbolenbestand"

#: sys-utils/readprofile.c:313
#, c-format
msgid "can't find \"_stext\" in %s"
msgstr "kan \"_stext\" niet vinden in %s"

#: sys-utils/readprofile.c:346
msgid "profile address out of range. Wrong map file?"
msgstr "profileringsadres valt buiten bereik.  Verkeerd symbolenbestand?"

#: sys-utils/readprofile.c:404
msgid "total"
msgstr "totaal"

#: sys-utils/renice.c:52
msgid "process ID"
msgstr "proces-ID"

#: sys-utils/renice.c:53
msgid "process group ID"
msgstr "procesgroeps-ID"

#: sys-utils/renice.c:61
#, c-format
msgid ""
" %1$s [-n] <priority> [-p|--pid] <pid>...\n"
" %1$s [-n] <priority>  -g|--pgrp <pgid>...\n"
" %1$s [-n] <priority>  -u|--user <user>...\n"
msgstr ""
"  %1$s [-n] <prioriteit> [-p|--pid] <PID>...\n"
"  %1$s [-n] <prioriteit>  -g|--pgrp <PGID>...\n"
"  %1$s [-n] <prioriteit>  -u|--user <gebruiker>...\n"

#: sys-utils/renice.c:67
msgid "Alter the priority of running processes.\n"
msgstr "Wijzigt de prioriteit van een draaiend proces.\n"

#: sys-utils/renice.c:70
msgid " -n, --priority <num>   specify the nice increment value\n"
msgstr "  -n, --priority <getal>    de beleefdheidswaarde met dit getal verlagen\n"

# FIXME: XXX this <id> isn't right, it can be more IDs --
# the -p, -g and -u options just switch how the next arguments are interpreted
#: sys-utils/renice.c:71
msgid " -p, --pid <id>         interpret argument as process ID (default)\n"
msgstr "  -p, --pid       navolgende argumenten als proces-ID interpreteren  (standaard)\n"

#: sys-utils/renice.c:72
msgid " -g, --pgrp <id>        interpret argument as process group ID\n"
msgstr "  -g, --pgrp      navolgende argumenten als procesgroep-ID interpreteren\n"

#: sys-utils/renice.c:73
msgid " -u, --user <name>|<id> interpret argument as username or user ID\n"
msgstr "  -u, --user      navolgende argumenten als gebruikersnaam of UID interpreteren\n"

#: sys-utils/renice.c:86
#, c-format
msgid "failed to get priority for %d (%s)"
msgstr "achterhalen van prioriteit voor %d is mislukt (%s)"

#: sys-utils/renice.c:99
#, c-format
msgid "failed to set priority for %d (%s)"
msgstr "instellen van prioriteit voor %d is mislukt (%s)"

#: sys-utils/renice.c:104
#, c-format
msgid "%d (%s) old priority %d, new priority %d\n"
msgstr "%d (%s): oude prioriteit is %d, nieuwe prioriteit is %d\n"

#: sys-utils/renice.c:176
#, c-format
msgid "unknown user %s"
msgstr "onbekende gebruiker %s"

#. TRANSLATORS: The first %s is one of the above
#. * three ID names. Read: "bad value for %s: %s"
#: sys-utils/renice.c:185
#, c-format
msgid "bad %s value: %s"
msgstr "ongeldige waarde voor %s: %s"

#: sys-utils/rtcwake.c:98
msgid "Enter a system sleep state until a specified wakeup time.\n"
msgstr "Zet het systeem in een slaapstand tot een aangegeven ontwakingstijd.\n"

#: sys-utils/rtcwake.c:101
msgid " -a, --auto               reads the clock mode from adjust file (default)\n"
msgstr "  -a, --auto               leest de klokmodus uit registratiebestand (standaard)\n"

#: sys-utils/rtcwake.c:103
#, c-format
msgid ""
" -A, --adjfile <file>     specifies the path to the adjust file\n"
"                            the default is %s\n"
msgstr ""
"  -A, --adjfile=<bestand>  te gebruiken verschuivingsregistratiebestand\n"
"                             (standaard is %s)\n"

#: sys-utils/rtcwake.c:105
msgid "     --date <timestamp>   date time of timestamp to wake\n"
msgstr "      --date <datumtijd>   het tijdstip om weer wakker te worden\n"

#: sys-utils/rtcwake.c:106
msgid " -d, --device <device>    select rtc device (rtc0|rtc1|...)\n"
msgstr "  -d, --device <apparaat>  te gebruiken hardwareklok (rtc0|rtc1|...)\n"

#: sys-utils/rtcwake.c:107
msgid " -n, --dry-run            does everything, but suspend\n"
msgstr "  -n, --dry-run            doet alles, behalve gaan slapen\n"

#: sys-utils/rtcwake.c:108
msgid " -l, --local              RTC uses local timezone\n"
msgstr "  -l, --local              hardwareklok is in lokale tijd\n"

#: sys-utils/rtcwake.c:109
msgid "     --list-modes         list available modes\n"
msgstr "      --list-modes         de beschikbare modi opsommen\n"

#: sys-utils/rtcwake.c:110
msgid " -m, --mode <mode>        standby|mem|... sleep mode\n"
msgstr "  -m, --mode <modus>       slaapmodus (standby|mem|...)\n"

#: sys-utils/rtcwake.c:111
msgid " -s, --seconds <seconds>  seconds to sleep\n"
msgstr "  -s, --seconds <aantal>   het aantal te slapen seconden\n"

#: sys-utils/rtcwake.c:112
msgid " -t, --time <time_t>      time to wake\n"
msgstr "  -t, --time <wekmoment>   tijdstip om te ontwaken (in seconden sinds 1970)\n"

#: sys-utils/rtcwake.c:113
msgid " -u, --utc                RTC uses UTC\n"
msgstr "  -u, --utc                hardwareklok is in UTC (universele tijd)\n"

#: sys-utils/rtcwake.c:114
msgid " -v, --verbose            verbose messages\n"
msgstr "  -v, --verbose            gedetailleerde uitvoer produceren\n"

#: sys-utils/rtcwake.c:167
msgid "read rtc time failed"
msgstr "lezen van hardwarekloktijd is mislukt"

#: sys-utils/rtcwake.c:173
msgid "read system time failed"
msgstr "lezen van systeemtijd is mislukt"

#: sys-utils/rtcwake.c:189
msgid "convert rtc time failed"
msgstr "omzetten van hardwarekloktijd is mislukt"

#: sys-utils/rtcwake.c:237
msgid "set rtc wake alarm failed"
msgstr "zetten van de wekker is mislukt"

#: sys-utils/rtcwake.c:307
#, c-format
msgid "unexpected third line in: %s: %s"
msgstr "onverwachte derde regel in %s: %s"

#: sys-utils/rtcwake.c:320 sys-utils/rtcwake.c:624
msgid "read rtc alarm failed"
msgstr "lezen van de wekker is mislukt"

#: sys-utils/rtcwake.c:325
#, c-format
msgid "alarm: off\n"
msgstr "wekker: uit\n"

#: sys-utils/rtcwake.c:338
msgid "convert time failed"
msgstr "omzetten van hardwarekloktijd is mislukt"

#: sys-utils/rtcwake.c:343
#, c-format
msgid "alarm: on  %s"
msgstr "wekker: aan  %s"

#: sys-utils/rtcwake.c:387
#, c-format
msgid "could not read: %s"
msgstr "kan %s niet lezen"

#: sys-utils/rtcwake.c:467
#, c-format
msgid "unrecognized suspend state '%s'"
msgstr "onbekende slaaptoestand '%s'"

#: sys-utils/rtcwake.c:475
msgid "invalid seconds argument"
msgstr "ongeldig aantal seconden"

#: sys-utils/rtcwake.c:479
msgid "invalid time argument"
msgstr "ongeldige tijd"

#: sys-utils/rtcwake.c:506
#, c-format
msgid "%s: assuming RTC uses UTC ...\n"
msgstr "%s: aangenomen wordt dat de hardwareklok UTC bevat...\n"

#: sys-utils/rtcwake.c:511
msgid "Using UTC time.\n"
msgstr "UTC wordt gebruikt.\n"

#: sys-utils/rtcwake.c:512
msgid "Using local time.\n"
msgstr "Lokale tijd wordt gebruikt.\n"

#: sys-utils/rtcwake.c:515
msgid "must provide wake time (see --seconds, --time and --date options)"
msgstr "u dient een wektijd op te geven, via '-s' of '-t' of '--date'"

#: sys-utils/rtcwake.c:521
#, c-format
msgid "%s not enabled for wakeup events"
msgstr "%s kan geen wekgebeurtenissen aan"

#: sys-utils/rtcwake.c:528
#, c-format
msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
msgstr "wektijdstip %ld, systeemtijd %ld, hardwarekloktijd %ld, seconden %u\n"

#: sys-utils/rtcwake.c:535
#, c-format
msgid "time doesn't go backward to %s"
msgstr "tijd loopt niet achteruit naar %s"

#: sys-utils/rtcwake.c:545
#, c-format
msgid "%s: wakeup using %s at %s"
msgstr "%s: ontwaking via %s op %s"

#: sys-utils/rtcwake.c:549
#, c-format
msgid "%s: wakeup from \"%s\" using %s at %s"
msgstr "%s: ontwaking uit '%s' via %s op %s"

#: sys-utils/rtcwake.c:559
#, c-format
msgid "suspend mode: no; leaving\n"
msgstr "slaapmodus: nee -- gestopt\n"

#: sys-utils/rtcwake.c:568
#, c-format
msgid "suspend mode: off; executing %s\n"
msgstr "slaapmodus: uit -- uitvoeren van %s\n"

#: sys-utils/rtcwake.c:587
#, c-format
msgid "suspend mode: on; reading rtc\n"
msgstr "slaapmodus: aan -- lezen van hardwareklok\n"

#: sys-utils/rtcwake.c:592
msgid "rtc read failed"
msgstr "lezen van hardwareklok is mislukt"

#: sys-utils/rtcwake.c:604
#, c-format
msgid "suspend mode: disable; disabling alarm\n"
msgstr "slaapmodus: uitgeschakeld -- wekker wordt uitgeschakeld\n"

#: sys-utils/rtcwake.c:608
#, c-format
msgid "suspend mode: show; printing alarm info\n"
msgstr "slaapmodus: tonen -- wekkerinfo wordt getoond\n"

#: sys-utils/rtcwake.c:615
#, c-format
msgid "suspend mode: %s; suspending system\n"
msgstr "slaapmodus: %s -- de computer gaat slapen\n"

#: sys-utils/rtcwake.c:629
msgid "disable rtc alarm interrupt failed"
msgstr "uitschakelen van hardwareklok-interrupt is mislukt"

#: sys-utils/setarch.c:48
#, c-format
msgid "Switching on %s.\n"
msgstr "Aanzetten van %s.\n"

#: sys-utils/setarch.c:91
#, c-format
msgid " %s <arch> [options] [<program> [<argument>...]]\n"
msgstr "  %s <architectuur> [opties] [<programma> [<argument>...]]\n"

#: sys-utils/setarch.c:96
msgid "Change the reported architecture and set personality flags.\n"
msgstr "Wijzigt de gerapporteerde architectuur en stelt persoonlijkheidsvlaggen in.\n"

#: sys-utils/setarch.c:99
msgid " -B, --32bit              turns on ADDR_LIMIT_32BIT\n"
msgstr "  -B, --32bit               ADDR_LIMIT_32BIT inschakelen\n"

#: sys-utils/setarch.c:100
msgid " -F, --fdpic-funcptrs     makes function pointers point to descriptors\n"
msgstr "  -F, --fdpic-funcptrs      functiepointers naar descriptors laten wijzen\n"

#: sys-utils/setarch.c:101
msgid " -I, --short-inode        turns on SHORT_INODE\n"
msgstr "  -I, --short-inode         SHORT_INODE inschakelen\n"

#: sys-utils/setarch.c:102
msgid " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
msgstr "  -L, --addr-compat-layout  virtueel geheugen op andere manier toewijzen\n"

#: sys-utils/setarch.c:103
msgid " -R, --addr-no-randomize  disables randomization of the virtual address space\n"
msgstr "  -R, --addr-no-randomize   virtuele adresruimte niet husselen\n"

#: sys-utils/setarch.c:104
msgid " -S, --whole-seconds      turns on WHOLE_SECONDS\n"
msgstr "  -S, --whole-seconds       WHOLE_SECONDS inschakelen\n"

#: sys-utils/setarch.c:105
msgid " -T, --sticky-timeouts    turns on STICKY_TIMEOUTS\n"
msgstr "  -T, --sticky-timeouts     STICKY_TIMEOUTS inschakelen\n"

#: sys-utils/setarch.c:106
msgid " -X, --read-implies-exec  turns on READ_IMPLIES_EXEC\n"
msgstr "  -X, --read-implies-exec   READ_IMPLIES_EXEC inschakelen\n"

#: sys-utils/setarch.c:107
msgid " -Z, --mmap-page-zero     turns on MMAP_PAGE_ZERO\n"
msgstr "  -Z, --mmap-page-zero      MMAP_PAGE_ZERO inschakelen\n"

#: sys-utils/setarch.c:108
msgid " -3, --3gb                limits the used address space to a maximum of 3 GB\n"
msgstr "  -3, --3gb                 gebruikte adresruimte tot 3 GB beperken\n"

#: sys-utils/setarch.c:109
msgid "     --4gb                ignored (for backward compatibility only)\n"
msgstr "      --4gb                 (genegeerd, slechts herkend voor compatibiliteit)\n"

#: sys-utils/setarch.c:110
msgid "     --uname-2.6          turns on UNAME26\n"
msgstr "      --uname-2.6           UNAME26 inschakelen\n"

#: sys-utils/setarch.c:111
msgid " -v, --verbose            say what options are being switched on\n"
msgstr "  -v, --verbose             melden welke opties ingeschakeld worden\n"

#: sys-utils/setarch.c:114
msgid "     --list               list settable architectures, and exit\n"
msgstr "      --list                instelbare architecturen tonen en stoppen\n"

# FIXME: backtick -- NO, standardize
#: sys-utils/setarch.c:128
#, c-format
msgid ""
"%s\n"
"Try `%s --help' for more information."
msgstr ""
"%s\n"
"Typ '%s --help' voor meer informatie."

# FIXME: backtick
#: sys-utils/setarch.c:131
#, c-format
msgid "Try `%s --help' for more information."
msgstr "Typ '%s --help' voor meer informatie."

#: sys-utils/setarch.c:237
#, c-format
msgid "%s: Unrecognized architecture"
msgstr "%s: Onbekende architectuur"

#: sys-utils/setarch.c:258
#, c-format
msgid "Kernel cannot set architecture to %s"
msgstr "kernel kan architectuur niet op %s instellen"

#: sys-utils/setarch.c:305
msgid "Not enough arguments"
msgstr "Te weinig argumenten"

#: sys-utils/setarch.c:322
#, c-format
msgid "Failed to set personality to %s"
msgstr "instellen van persoonlijkheid op %s is mislukt"

#: sys-utils/setarch.c:379
msgid "unrecognized option '--list'"
msgstr "niet-toegestane optie '--list'"

#: sys-utils/setarch.c:387
msgid "no architecture argument specified"
msgstr "geen architectuur opgegeven"

#: sys-utils/setarch.c:393
#, c-format
msgid "failed to set personality to %s"
msgstr "instellen van persoonlijkheid op %s is mislukt"

#: sys-utils/setarch.c:396
#, c-format
msgid "Execute command `%s'.\n"
msgstr "Uitvoering van opdracht '%s'.\n"

#: sys-utils/setpriv.c:93
#, c-format
msgid " %s [options] <program> [<argument>...]\n"
msgstr "  %s [opties] <programma> [<argument>...]\n"

#: sys-utils/setpriv.c:97
msgid "Run a program with different privilege settings.\n"
msgstr "Draait een programma met andere privilege-instellingen.\n"

#: sys-utils/setpriv.c:100
msgid " -d, --dump               show current state (and do not exec anything)\n"
msgstr "  -d, --dump               huidige toestand tonen (en verder niets doen)\n"

#: sys-utils/setpriv.c:101
msgid " --nnp, --no-new-privs    disallow granting new privileges\n"
msgstr "  --nnp, --no-new-privs    het toekennen van nieuwe privileges niet toestaan\n"

# FIXME: singular cap
#: sys-utils/setpriv.c:102
msgid " --inh-caps <caps,...>    set inheritable capabilities\n"
msgstr "  --inh-caps <cap,...>     overerfbare capabilities instellen\n"

# FIXME: same "cap comma" as above
#: sys-utils/setpriv.c:103
msgid " --bounding-set <caps>    set capability bounding set\n"
msgstr "  --bounding-set <cap,...>   beperkende set van capabilities instellen\n"

#: sys-utils/setpriv.c:104
msgid " --ruid <uid>             set real uid\n"
msgstr "  --ruid <UID>             werkelijke UID instellen\n"

#: sys-utils/setpriv.c:105
msgid " --euid <uid>             set effective uid\n"
msgstr "  --euid <UID>             effectieve UID instellen\n"

#: sys-utils/setpriv.c:106
msgid " --rgid <gid>             set real gid\n"
msgstr "  --rgid <GID>             werkelijke GID instellen\n"

#: sys-utils/setpriv.c:107
msgid " --egid <gid>             set effective gid\n"
msgstr "  --egid <GID>             effectieve GID instellen\n"

#: sys-utils/setpriv.c:108
msgid " --reuid <uid>            set real and effective uid\n"
msgstr "  --reuid <UID>            werkelijke en effectieve UID instellen\n"

#: sys-utils/setpriv.c:109
msgid " --regid <gid>            set real and effective gid\n"
msgstr "  --regid <GID>            werkelijke en effectieve GID instellen\n"

#: sys-utils/setpriv.c:110
msgid " --clear-groups           clear supplementary groups\n"
msgstr "  --clear-groups           de supplementaire groepen wissen\n"

#: sys-utils/setpriv.c:111
msgid " --keep-groups            keep supplementary groups\n"
msgstr "  --keep-groups            de supplementaire groepen behouden\n"

#: sys-utils/setpriv.c:112
msgid " --groups <group,...>     set supplementary groups\n"
msgstr "  --groups <groep,...>     supplementaire groepen instellen\n"

#: sys-utils/setpriv.c:113
msgid " --securebits <bits>      set securebits\n"
msgstr "  --securebits <bits>      deze 'securebits' instellen\n"

#: sys-utils/setpriv.c:114
msgid " --selinux-label <label>  set SELinux label\n"
msgstr "  --selinux-label <label>  SELinux-label instellen\n"

#: sys-utils/setpriv.c:115
msgid " --apparmor-profile <pr>  set AppArmor profile\n"
msgstr "  --apparmor-profile <profiel>  AppArmor-profiel instellen\n"

#: sys-utils/setpriv.c:121
msgid " This tool can be dangerous.  Read the manpage, and be careful.\n"
msgstr "Dit gereedschap kan gevaarlijk zijn.  Lees de handleiding, en wees voorzichtig.\n"

#: sys-utils/setpriv.c:193 sys-utils/setpriv.c:467
msgid "getting process secure bits failed"
msgstr "het verkrijgen van de 'securebits' van proces is mislukt"

#: sys-utils/setpriv.c:197
#, c-format
msgid "Securebits: "
msgstr "Securebits: "

#: sys-utils/setpriv.c:217
#, c-format
msgid "[none]\n"
msgstr "[geen]\n"

#: sys-utils/setpriv.c:243
#, c-format
msgid "%s: too long"
msgstr "%s: te lang"

#: sys-utils/setpriv.c:271
#, c-format
msgid "Supplementary groups: "
msgstr "Supplementaire groepen: "

#: sys-utils/setpriv.c:273 sys-utils/setpriv.c:321 sys-utils/setpriv.c:326
#: sys-utils/setpriv.c:332 sys-utils/setpriv.c:337
#, c-format
msgid "[none]"
msgstr "[geen]"

#: sys-utils/setpriv.c:293
#, c-format
msgid "uid: %u\n"
msgstr "UID: %u\n"

#: sys-utils/setpriv.c:294
#, c-format
msgid "euid: %u\n"
msgstr "EUID: %u\n"

#: sys-utils/setpriv.c:297
#, c-format
msgid "suid: %u\n"
msgstr "SUID: %u\n"

#: sys-utils/setpriv.c:299 sys-utils/setpriv.c:391
msgid "getresuid failed"
msgstr "getresuid() is mislukt"

#: sys-utils/setpriv.c:308 sys-utils/setpriv.c:406
msgid "getresgid failed"
msgstr "getresgid() is mislukt"

#: sys-utils/setpriv.c:319
#, c-format
msgid "Effective capabilities: "
msgstr "Effectieve capabilities: "

#: sys-utils/setpriv.c:324
#, c-format
msgid "Permitted capabilities: "
msgstr "Toegestane capabilities: "

#: sys-utils/setpriv.c:330
#, c-format
msgid "Inheritable capabilities: "
msgstr "Overerfbare capabilities: "

#: sys-utils/setpriv.c:335
#, c-format
msgid "Capability bounding set: "
msgstr "Beperkende set van capabilities: "

#: sys-utils/setpriv.c:343
msgid "SELinux label"
msgstr "SELinux-label"

#: sys-utils/setpriv.c:346
msgid "AppArmor profile"
msgstr "AppArmor-profiel"

#: sys-utils/setpriv.c:359
#, c-format
msgid "cap %d: libcap-ng is broken"
msgstr "cap %d: 'libcap-ng' misfunctioneert"

# FIXME: start with lowercase
#: sys-utils/setpriv.c:382
msgid "Invalid supplementary group id"
msgstr "Ongeldig ID van supplementaire groep"

#: sys-utils/setpriv.c:399
msgid "setresuid failed"
msgstr "setresuid() is mislukt"

#: sys-utils/setpriv.c:414
msgid "setresgid failed"
msgstr "setresgid() is mislukt"

#: sys-utils/setpriv.c:435
msgid "bad capability string"
msgstr "ongeldige capability-tekenreeks"

#: sys-utils/setpriv.c:443
msgid "libcap-ng is too old for \"all\" caps"
msgstr "'libcap-ng' is te oud voor capability \"all\""

#: sys-utils/setpriv.c:452
#, c-format
msgid "unknown capability \"%s\""
msgstr "onbekende capability \"%s\""

#: sys-utils/setpriv.c:476
msgid "unrecognized securebit set -- refusing to adjust"
msgstr "onbekende set van 'securebits' -- niet aangepast"

#: sys-utils/setpriv.c:480
msgid "bad securebits string"
msgstr "ongeldige 'securebits'-tekenreeks"

#: sys-utils/setpriv.c:487
msgid "+all securebits is not allowed"
msgstr "'+all securebits' is niet toegestaan"

#: sys-utils/setpriv.c:500
msgid "adjusting keep_caps does not make sense"
msgstr "het aanpassen van 'keep_caps' is onzinnig"

#: sys-utils/setpriv.c:504
msgid "unrecognized securebit"
msgstr "onbekende 'securebit'"

#: sys-utils/setpriv.c:524
msgid "SELinux is not running"
msgstr "SELinux draait niet"

#: sys-utils/setpriv.c:539
#, c-format
msgid "close failed: %s"
msgstr "sluiten is mislukt: %s"

#: sys-utils/setpriv.c:547
msgid "AppArmor is not running"
msgstr "AppArmor draait niet"

#: sys-utils/setpriv.c:658
msgid "duplicate --no-new-privs option"
msgstr "dubbele optie '--no-new-privs'"

#: sys-utils/setpriv.c:663
msgid "duplicate ruid"
msgstr "dubbele RUID"

#: sys-utils/setpriv.c:665
msgid "failed to parse ruid"
msgstr "ontleden van RUID is mislukt"

#: sys-utils/setpriv.c:669
msgid "duplicate euid"
msgstr "dubbele EUID"

#: sys-utils/setpriv.c:671
msgid "failed to parse euid"
msgstr "ontleden van EUID is mislukt"

#: sys-utils/setpriv.c:675
msgid "duplicate ruid or euid"
msgstr "dubbele RUID of EUID"

#: sys-utils/setpriv.c:677
msgid "failed to parse reuid"
msgstr "ontleden van REUID is mislukt"

#: sys-utils/setpriv.c:681
msgid "duplicate rgid"
msgstr "dubbele RGID"

#: sys-utils/setpriv.c:683
msgid "failed to parse rgid"
msgstr "ontleden van RGID is mislukt"

#: sys-utils/setpriv.c:687
msgid "duplicate egid"
msgstr "dubbele EGID"

#: sys-utils/setpriv.c:689
msgid "failed to parse egid"
msgstr "ontleden van EGID is mislukt"

#: sys-utils/setpriv.c:693
msgid "duplicate rgid or egid"
msgstr "dubbele RGID of EGID"

#: sys-utils/setpriv.c:695
msgid "failed to parse regid"
msgstr "ontleden van REGID is mislukt"

#: sys-utils/setpriv.c:700
msgid "duplicate --clear-groups option"
msgstr "dubbele optie '--clear-groups'"

#: sys-utils/setpriv.c:706
msgid "duplicate --keep-groups option"
msgstr "dubbele optie '--keep-groups'"

#: sys-utils/setpriv.c:712
msgid "duplicate --groups option"
msgstr "dubbele optie '--groups'"

#: sys-utils/setpriv.c:721
msgid "duplicate --inh-caps option"
msgstr "dubbele optie '--inh-caps'"

#: sys-utils/setpriv.c:727
msgid "duplicate --bounding-set option"
msgstr "dubbele optie '--bounding-set'"

#: sys-utils/setpriv.c:733
msgid "duplicate --securebits option"
msgstr "dubbele optie '--securebits'"

#: sys-utils/setpriv.c:739
msgid "duplicate --selinux-label option"
msgstr "dubbele optie '--selinux-label'"

#: sys-utils/setpriv.c:745
msgid "duplicate --apparmor-profile option"
msgstr "dubbele optie '--apparmor-profile'"

#: sys-utils/setpriv.c:761
msgid "--dump is incompatible with all other options"
msgstr "optie '--dump' is incompatibel met alle andere opties"

#: sys-utils/setpriv.c:769
msgid "--list-caps must be specified alone"
msgstr "optie '--list-caps' moet alléén gegeven worden"

#: sys-utils/setpriv.c:775
msgid "No program specified"
msgstr "geen programma aangegeven"

#: sys-utils/setpriv.c:780
msgid "--[re]gid requires --keep-groups, --clear-groups, or --groups"
msgstr "optie '--[re]gid' vereist '--groups', '--keep-groups', of '--clear-groups'"

#: sys-utils/setpriv.c:783
msgid "disallow granting new privileges failed"
msgstr "het verbieden van het toekennen van nieuwe privileges is mislukt"

#: sys-utils/setpriv.c:791
msgid "keep process capabilities failed"
msgstr "het behouden van capabilities van proces is mislukt"

#: sys-utils/setpriv.c:799
msgid "activate capabilities"
msgstr "capabilities activeren"

#: sys-utils/setpriv.c:805
msgid "reactivate capabilities"
msgstr "capabilities heractiveren"

#: sys-utils/setpriv.c:821
msgid "set process securebits failed"
msgstr "het instellen van de 'securebits' van proces is mislukt"

#: sys-utils/setpriv.c:827
msgid "apply bounding set"
msgstr "de beperkende set toepassen"

#: sys-utils/setpriv.c:833
msgid "apply capabilities"
msgstr "capabilities toepassen"

#: sys-utils/setpriv.c:838
#, c-format
msgid "cannot execute: %s"
msgstr "kan '%s' niet uitvoeren"

#: sys-utils/setsid.c:32
#, c-format
msgid " %s [options] <program> [arguments ...]\n"
msgstr "  %s [opties] <programma> [<argument>...]\n"

#: sys-utils/setsid.c:36
msgid "Run a program in a new session.\n"
msgstr "Draait een programma in een nieuwe sessie.\n"

#: sys-utils/setsid.c:39
msgid " -c, --ctty     set the controlling terminal to the current one\n"
msgstr "  -c, --ctty     de sturende terminal instellen op de huidige\n"

#: sys-utils/setsid.c:40
msgid " -w, --wait     wait program to exit, and use the same return\n"
msgstr "  -w, --wait     wachten tot programma afsluit en diens afsluitwaarde overnemen\n"

#: sys-utils/setsid.c:93
msgid "fork"
msgstr "fork() is mislukt"

#: sys-utils/setsid.c:105
#, c-format
msgid "child %d did not exit normally"
msgstr "dochterproces %d is niet normaal afgesloten"

#: sys-utils/setsid.c:110
msgid "setsid failed"
msgstr "setsid() is mislukt"

#: sys-utils/setsid.c:113
msgid "failed to set the controlling terminal"
msgstr "het instellen van de sturende terminal is mislukt"

#: sys-utils/swapoff.c:86
#, c-format
msgid "swapoff %s\n"
msgstr "swapoff %s\n"

#: sys-utils/swapoff.c:105
msgid "Not superuser."
msgstr "U bent niet root."

#: sys-utils/swapoff.c:108
#, c-format
msgid "%s: swapoff failed"
msgstr "%s: swapoff is mislukt"

#: sys-utils/swapoff.c:122 sys-utils/swapon.c:789
#, c-format
msgid " %s [options] [<spec>]\n"
msgstr "  %s [opties] [<naam>]\n"

#: sys-utils/swapoff.c:125
msgid "Disable devices and files for paging and swapping.\n"
msgstr "Deactiveert apparaten en bestanden met wisselgeheugen.\n"

#: sys-utils/swapoff.c:128
msgid ""
" -a, --all              disable all swaps from /proc/swaps\n"
" -v, --verbose          verbose mode\n"
msgstr ""
"  -a, --all          alle wisselgebieden uit /proc/swaps uitschakelen\n"
"  -v, --verbose      gedetailleerde uitvoer produceren\n"

#: sys-utils/swapoff.c:135
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             LABEL of device to be used\n"
" -U <uuid>              UUID of device to be used\n"
" LABEL=<label>          LABEL of device to be used\n"
" UUID=<uuid>            UUID of device to be used\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
msgstr ""
"\n"
"De parameter <naam> kan zijn:\n"
"  -L <label> | LABEL=<label>    label van te gebruiken apparaat\n"
"  -U <uuid> | UUID=<uuid>       UUID van te gebruiken apparaat\n"
"  <apparaat>                    naam van te gebruiken apparaat\n"
"  <bestand>                     naam van te gebruiken bestand\n"

#: sys-utils/swapon.c:93
msgid "device file or partition path"
msgstr "apparaatbestand of partitiepad"

#: sys-utils/swapon.c:94
msgid "type of the device"
msgstr "soort apparaat"

#: sys-utils/swapon.c:95
msgid "size of the swap area"
msgstr "grootte van wisselgebied"

#: sys-utils/swapon.c:96
msgid "bytes in use"
msgstr "gebruikte bytes"

#: sys-utils/swapon.c:97
msgid "swap priority"
msgstr "swap-prioriteit"

#: sys-utils/swapon.c:98
msgid "swap uuid"
msgstr "swap-UUID"

#: sys-utils/swapon.c:99
msgid "swap label"
msgstr "swap-label"

#: sys-utils/swapon.c:247
#, c-format
msgid "%s\t\t\t\tType\t\tSize\tUsed\tPriority\n"
msgstr "%s\t\t\t\tSoort\t\tGrootte\tGebruikt\tPrioriteit\n"

#: sys-utils/swapon.c:247
msgid "Filename"
msgstr "Bestandsnaam"

#: sys-utils/swapon.c:313
#, c-format
msgid "%s: reinitializing the swap."
msgstr "%s: herinitialisatie van het wisselgeheugen"

#: sys-utils/swapon.c:377
#, c-format
msgid "%s: lseek failed"
msgstr "%s: 'lseek' is mislukt"

#: sys-utils/swapon.c:383
#, c-format
msgid "%s: write signature failed"
msgstr "%s: schrijven van vingerafdruk is mislukt"

#: sys-utils/swapon.c:537
#, c-format
msgid "%s: skipping - it appears to have holes."
msgstr "%s: wordt overgeslagen -- het lijkt gaten te hebben."

#: sys-utils/swapon.c:545
#, c-format
msgid "%s: get size failed"
msgstr "%s: achterhalen van grootte is mislukt"

#: sys-utils/swapon.c:551
#, c-format
msgid "%s: read swap header failed"
msgstr "%s: lezen van kop van wisselgeheugen is mislukt"

# FIXME: %ud?
#: sys-utils/swapon.c:556
#, c-format
msgid "%s: found signature [pagesize=%d, signature=%s]"
msgstr "%s: wisselgeheugenvingerafdruk gevonden [paginagrootte=%d, vingerafdruk=%s]"

#: sys-utils/swapon.c:567
#, c-format
msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
msgstr "%s: paginagrootte=%d, wisselgrootte=%llu, apparaatgrootte=%llu"

#: sys-utils/swapon.c:572
#, c-format
msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
msgstr "%s: opgeslagen grootte (0x%08llx) van wisselgeheugen is groter dan de feitelijke ruimte"

#: sys-utils/swapon.c:582
#, c-format
msgid "%s: swap format pagesize does not match."
msgstr "%s: opgeslagen paginagrootte klopt niet"

#: sys-utils/swapon.c:588
#, c-format
msgid "%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
msgstr ""
"%s: opgeslagen paginagrootte klopt niet;\n"
"gebruik '--fixpgsz' om dit te corrigeren"

#: sys-utils/swapon.c:597
#, c-format
msgid "%s: software suspend data detected. Rewriting the swap signature."
msgstr "%s: slaapgegevens gevonden -- vingerafdruk wordt opnieuw geschreven"

#: sys-utils/swapon.c:667
#, c-format
msgid "swapon %s\n"
msgstr "swapon %s\n"

#: sys-utils/swapon.c:671
#, c-format
msgid "%s: swapon failed"
msgstr "%s: swapon is mislukt"

#: sys-utils/swapon.c:744
#, c-format
msgid "%s: noauto option -- ignored"
msgstr "%s: heeft noauto optie -- is overgeslagen"

#: sys-utils/swapon.c:766
#, c-format
msgid "%s: already active -- ignored"
msgstr "%s: is al actief -- genegeerd"

#: sys-utils/swapon.c:772
#, c-format
msgid "%s: inaccessible -- ignored"
msgstr "%s: is ontoegankelijk -- genegeerd"

#: sys-utils/swapon.c:792
msgid "Enable devices and files for paging and swapping.\n"
msgstr "Activeert apparaten en bestanden met wisselgeheugen.\n"

#: sys-utils/swapon.c:795
msgid " -a, --all                enable all swaps from /etc/fstab\n"
msgstr "  -a, --all                 alle wisselgeheugens in /etc/fstab activeren\n"

#: sys-utils/swapon.c:796
msgid " -d, --discard[=<policy>] enable swap discards, if supported by device\n"
msgstr "  -d, --discard[=<beleid>]  verwerpingen activeren, als apparaat dat kent\n"

#: sys-utils/swapon.c:797
msgid " -e, --ifexists           silently skip devices that do not exist\n"
msgstr "  -e, --ifexists            apparaten die niet bestaan stilzwijgend overslaan\n"

#: sys-utils/swapon.c:798
msgid " -f, --fixpgsz            reinitialize the swap space if necessary\n"
msgstr "  -f, --fixpgsz             wisselgeheugen indien nodig herinitialiseren\n"

#: sys-utils/swapon.c:799
msgid " -o, --options <list>     comma-separated list of swap options\n"
msgstr "  -o, --options <lijst>     kommagescheiden lijst van wisselgeheugenopties\n"

#: sys-utils/swapon.c:800
msgid " -p, --priority <prio>    specify the priority of the swap device\n"
msgstr "  -p, --priority <getal>    te gebruiken prioriteit van wisselgeheugenapparaat\n"

#: sys-utils/swapon.c:801
msgid " -s, --summary            display summary about used swap devices (DEPRECATED)\n"
msgstr "  -s, --summary             gebruikte wisselgeheugenapparaten opsommen  [OUD]\n"

#: sys-utils/swapon.c:802
msgid "     --show[=<columns>]   display summary in definable table\n"
msgstr "      --show[=<lijst>]      samenvatting tonen in definieerbare tabel\n"

#: sys-utils/swapon.c:803
msgid "     --noheadings         don't print table heading (with --show)\n"
msgstr "      --noheadings          geen kopregel tonen (bij '--show')\n"

#: sys-utils/swapon.c:804
msgid "     --raw                use the raw output format (with --show)\n"
msgstr "      --raw                 rauwe uitvoer produceren\n"

#: sys-utils/swapon.c:805
msgid "     --bytes              display swap size in bytes in --show output\n"
msgstr "      --bytes               wisselgeheugengrootte tonen in bytes (bij '--show')\n"

#: sys-utils/swapon.c:806
msgid " -v, --verbose            verbose mode\n"
msgstr "  -v, --verbose             gedetailleerde uitvoer produceren\n"

#: sys-utils/swapon.c:812
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             synonym for LABEL=<label>\n"
" -U <uuid>              synonym for UUID=<uuid>\n"
" LABEL=<label>          specifies device by swap area label\n"
" UUID=<uuid>            specifies device by swap area UUID\n"
" PARTLABEL=<label>      specifies device by partition label\n"
" PARTUUID=<uuid>        specifies device by partition UUID\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
msgstr ""
"\n"
"De parameter <naam> kan zijn:\n"
"  -L <label> | LABEL=<label>    label van te gebruiken apparaat\n"
"  -U <uuid> | UUID=<uuid>       UUID van te gebruiken apparaat\n"
"  PARTLABEL=<label>             label van te gebruiken partitie\n"
"  PARTUUID=<uuid>               UUID van te gebruiken partitie\n"
"  <apparaat>                    naam van te gebruiken apparaat\n"
"  <bestand>                     naam van te gebruiken bestand\n"

#: sys-utils/swapon.c:822
msgid ""
"\n"
"Available discard policy types (for --discard):\n"
" once    : only single-time area discards are issued\n"
" pages   : freed pages are discarded before they are reused\n"
"If no policy is selected, both discard types are enabled (default).\n"
msgstr ""
"\n"
"Beschikbare verwerpingssoorten (voor optie '--discard'):\n"
"  once    alleen eenmalige gebiedsverwerpingen gebruiken\n"
"  pages   vrije pagina's verwerpen alvorens ze te hergebruiken\n"
"Als geen beleid gekozen wordt, worden beide soorten gebruikt (standaard).\n"

#: sys-utils/swapon.c:827
msgid ""
"\n"
"Available columns (for --show):\n"
msgstr ""
"\n"
"Beschikbare kolommen (voor '--show') zijn:\n"

#: sys-utils/swapon.c:905
msgid "failed to parse priority"
msgstr "ontleden van prioriteit is mislukt"

#: sys-utils/swapon.c:924
#, c-format
msgid "unsupported discard policy: %s"
msgstr "ongeldig verwerpingsbeleid: %s"

#: sys-utils/swapon-common.c:73
#, c-format
msgid "cannot find the device for %s"
msgstr "kan geen apparaat vinden voor %s"

#: sys-utils/switch_root.c:60
msgid "failed to open directory"
msgstr "openen van map is mislukt"

#: sys-utils/switch_root.c:68
msgid "stat failed"
msgstr "opvragen van bestandsstatus is mislukt"

#: sys-utils/switch_root.c:79
msgid "failed to read directory"
msgstr "kan map niet lezen"

#: sys-utils/switch_root.c:116
#, c-format
msgid "failed to unlink %s"
msgstr "verwijderen van %s is mislukt"

#: sys-utils/switch_root.c:153
#, c-format
msgid "failed to mount moving %s to %s"
msgstr "aankoppelen met verplaatsing van %s naar %s is mislukt"

#: sys-utils/switch_root.c:155
#, c-format
msgid "forcing unmount of %s"
msgstr "gedwongen afkoppeling van %s"

#: sys-utils/switch_root.c:161
#, c-format
msgid "failed to change directory to %s"
msgstr "wijzigen van huidige map naar %s is mislukt"

#: sys-utils/switch_root.c:173
#, c-format
msgid "failed to mount moving %s to /"
msgstr "aankoppelen met verplaatsing van %s naar / is mislukt"

#: sys-utils/switch_root.c:179
msgid "failed to change root"
msgstr "wijzigen van hoofdmap is mislukt"

#: sys-utils/switch_root.c:192
msgid "old root filesystem is not an initramfs"
msgstr "oude hoofdbestandssysteem is geen 'initramfs'"

#: sys-utils/switch_root.c:204
#, c-format
msgid " %s [options] <newrootdir> <init> <args to init>\n"
msgstr "  %s [opties] <nieuwe_hoofdmap> <init> <argumenten_voor_init>\n"

#: sys-utils/switch_root.c:208
msgid "Switch to another filesystem as the root of the mount tree.\n"
msgstr "Maakt een ander bestandssysteem de hoofdmap van het draaiende systeem.\n"

#: sys-utils/switch_root.c:251
msgid "failed. Sorry."
msgstr "is mislukt, sorry"

#: sys-utils/switch_root.c:254
#, c-format
msgid "cannot access %s"
msgstr "kan geen toegang tot %s verkrijgen"

# NNN forget tunelp
#: sys-utils/tunelp.c:94
msgid "Set various parameters for the line printer.\n"
msgstr ""

# NNN forget tunelp
#: sys-utils/tunelp.c:97
msgid " -i, --irq <num>              specify parallel port irq\n"
msgstr ""

#: sys-utils/tunelp.c:98
msgid " -t, --time <ms>              driver wait time in milliseconds\n"
msgstr ""

#: sys-utils/tunelp.c:99
msgid " -c, --chars <num>            number of output characters before sleep\n"
msgstr ""

#: sys-utils/tunelp.c:100
msgid " -w, --wait <us>              strobe wait in micro seconds\n"
msgstr ""

#. TRANSLATORS: do not translate <on|off> arguments. The
#. argument reader does not recognize locale, unless `on' is
#. exactly that very same string.
#: sys-utils/tunelp.c:104
msgid " -a, --abort <on|off>         abort on error\n"
msgstr ""

#: sys-utils/tunelp.c:105
msgid " -o, --check-status <on|off>  check printer status before printing\n"
msgstr ""

#: sys-utils/tunelp.c:106
msgid " -C, --careful <on|off>       extra checking to status check\n"
msgstr ""

#: sys-utils/tunelp.c:107
msgid " -s, --status                 query printer status\n"
msgstr ""

#: sys-utils/tunelp.c:108
msgid " -T, --trust-irq <on|off>     make driver to trust irq\n"
msgstr ""

#: sys-utils/tunelp.c:109
msgid " -r, --reset                  reset the port\n"
msgstr ""

#: sys-utils/tunelp.c:110
msgid " -q, --print-irq <on|off>     display current irq setting\n"
msgstr ""

#: sys-utils/tunelp.c:261
#, c-format
msgid "%s not an lp device"
msgstr "%s is geen printerapparaat"

#: sys-utils/tunelp.c:280
msgid "LPGETSTATUS error"
msgstr "ioctl(LPGETSTATUS) is mislukt"

#: sys-utils/tunelp.c:285
#, c-format
msgid "%s status is %d"
msgstr "status van %s: %d"

#: sys-utils/tunelp.c:287
#, c-format
msgid ", busy"
msgstr ", bezig"

#: sys-utils/tunelp.c:289
#, c-format
msgid ", ready"
msgstr ", gereed"

#: sys-utils/tunelp.c:291
#, c-format
msgid ", out of paper"
msgstr ", papier is op"

#: sys-utils/tunelp.c:293
#, c-format
msgid ", on-line"
msgstr ", staat aan"

#: sys-utils/tunelp.c:295
#, c-format
msgid ", error"
msgstr ", fout"

#: sys-utils/tunelp.c:300
msgid "ioctl failed"
msgstr "ioctl() is mislukt"

#: sys-utils/tunelp.c:310
msgid "LPGETIRQ error"
msgstr "ioctl(LPGETIRQ) is mislukt"

#: sys-utils/tunelp.c:315
#, c-format
msgid "%s using IRQ %d\n"
msgstr "%s gebruikt IRQ %d\n"

#: sys-utils/tunelp.c:317
#, c-format
msgid "%s using polling\n"
msgstr "%s wordt actief gepolst\n"

#: sys-utils/umount.c:74
#, c-format
msgid ""
" %1$s [-hV]\n"
" %1$s -a [options]\n"
" %1$s [options] <source> | <directory>\n"
msgstr ""
"  %1$s [-hV] | -a [opties]\n"
"  %1$s [opties] <bron> | <map>\n"

#: sys-utils/umount.c:80
msgid "Unmount filesystems.\n"
msgstr "Koppelt bestandssystemen af.\n"

#: sys-utils/umount.c:83
msgid " -a, --all               unmount all filesystems\n"
msgstr "  -a, --all                 alle bestandssystemen afkoppelen\n"

#: sys-utils/umount.c:84
msgid ""
" -A, --all-targets       unmount all mountpoints for the given device in the\n"
"                           current namespace\n"
msgstr ""
"  -A, --all-targets         alle aankoppelingspunten van gegeven apparaat\n"
"                              in huidige naamsruimte afkoppelen\n"

#: sys-utils/umount.c:86
msgid " -c, --no-canonicalize   don't canonicalize paths\n"
msgstr "  -c, --no-canonicalize     paden niet canoniek maken\n"

#: sys-utils/umount.c:87
msgid " -d, --detach-loop       if mounted loop device, also free this loop device\n"
msgstr "  -d, --detach-loop         indien lus-apparaat, deze bovendien onthechten\n"

#: sys-utils/umount.c:88
msgid "     --fake              dry run; skip the umount(2) syscall\n"
msgstr "      --fake                doen alsof; de umount(2)-systeemaanroep overslaan\n"

#: sys-utils/umount.c:89
msgid " -f, --force             force unmount (in case of an unreachable NFS system)\n"
msgstr "  -f, --force               geforceerd afkoppelen (bij onbereikbaar NFS-systeem)\n"

#: sys-utils/umount.c:90
msgid " -i, --internal-only     don't call the umount.<type> helpers\n"
msgstr "  -i, --internal-only       niet de 'umount.<type>' hulpprogramma's gebruiken\n"

#: sys-utils/umount.c:92
msgid " -l, --lazy              detach the filesystem now, clean up things later\n"
msgstr "  -l, --lazy                bestandssysteem nu onthechten, later opruimen\n"

#: sys-utils/umount.c:93
msgid " -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
msgstr "  -O, --test-opts <lijst>   set van bestandssystemen beperken (bij '-a')\n"

#: sys-utils/umount.c:94
msgid " -R, --recursive         recursively unmount a target with all its children\n"
msgstr "  -R, --recursive           doel recursief afkoppelen inclusief all dochters\n"

#: sys-utils/umount.c:95
msgid " -r, --read-only         in case unmounting fails, try to remount read-only\n"
msgstr ""
"  -r, --read-only           wanneer afkoppelen faalt, dan heraankoppelen\n"
"                              als alleen-lezen proberen\n"

#: sys-utils/umount.c:96
msgid " -t, --types <list>      limit the set of filesystem types\n"
msgstr "  -t, --types <lijst>       de set van bestandssysteemsoorten beperken\n"

#: sys-utils/umount.c:141
#, c-format
msgid "%s (%s) unmounted"
msgstr "%s (%s) is afgekoppeld"

#: sys-utils/umount.c:143
#, c-format
msgid "%s unmounted"
msgstr "%s is afgekoppeld"

#: sys-utils/umount.c:203
msgid "failed to set umount target"
msgstr "instellen van afkoppelingsdoel is mislukt"

#: sys-utils/umount.c:219
msgid "libmount table allocation failed"
msgstr "geheugenreservering voor libmount-tabel is mislukt"

#: sys-utils/umount.c:262 sys-utils/umount.c:342
msgid "libmount iterator allocation failed"
msgstr "geheugenreservering voor libmount-iterator is mislukt"

#: sys-utils/umount.c:268
#, c-format
msgid "failed to get child fs of %s"
msgstr "verkrijgen van dochterbestandssysteem van %s is mislukt"

#: sys-utils/umount.c:306 sys-utils/umount.c:329
#, c-format
msgid "%s: not found"
msgstr "%s: niet gevonden"

# FIXME: remove period
#: sys-utils/umount.c:336
#, c-format
msgid "%s: failed to determine source (--all-targets is unsupported on systems with regular mtab file)."
msgstr ""
"%s: bepalen van bron is mislukt\n"
"('--all-targets' wordt niet ondersteund op systemen met een gewoon 'mtab'-bestand)"

#: sys-utils/unshare.c:89
#, c-format
msgid "unsupported --setgroups argument '%s'"
msgstr "niet-ondersteund argument van '--setgroups': '%s'"

#: sys-utils/unshare.c:110 sys-utils/unshare.c:125
#, c-format
msgid "write failed %s"
msgstr "schrijven van %s is mislukt"

#: sys-utils/unshare.c:148
#, c-format
msgid "unsupported propagation mode: %s"
msgstr "ongeldige propagatiemodus: %s"

#: sys-utils/unshare.c:157
msgid "cannot change root filesystem propagation"
msgstr "kan propagatie voor root-bestandssysteem niet wijzigen"

#: sys-utils/unshare.c:188
#, c-format
msgid "mount %s on %s failed"
msgstr "aankoppelen van %s op %s is mislukt"

#: sys-utils/unshare.c:202
#, c-format
msgid "cannot stat %s"
msgstr "kan status van '%s' niet opvragen"

#: sys-utils/unshare.c:213
msgid "pipe failed"
msgstr "pipe() is mislukt"

#: sys-utils/unshare.c:227
msgid "failed to read pipe"
msgstr "lezen uit pijp is mislukt"

#: sys-utils/unshare.c:250
msgid "Run a program with some namespaces unshared from the parent.\n"
msgstr "Draait een programma met sommige naamsruimtes gescheiden van het ouderproces.\n"

#: sys-utils/unshare.c:253
msgid " -m, --mount[=<file>]      unshare mounts namespace\n"
msgstr "  -m, --mount[=<bestand>]  aankoppelingsnaamsruimte scheiden\n"

#: sys-utils/unshare.c:254
msgid " -u, --uts[=<file>]        unshare UTS namespace (hostname etc)\n"
msgstr "  -u, --uts[=<bestand>]    UTS-naamsruimte scheiden (hostnaam en dergelijke)\n"

#: sys-utils/unshare.c:255
msgid " -i, --ipc[=<file>]        unshare System V IPC namespace\n"
msgstr "  -i, --ipc[=<bestand>]    System-V-IPC-naamsruimte scheiden\n"

#: sys-utils/unshare.c:256
msgid " -n, --net[=<file>]        unshare network namespace\n"
msgstr "  -n, --net[=<bestand>]    netwerknaamsruimte scheiden\n"

#: sys-utils/unshare.c:257
msgid " -p, --pid[=<file>]        unshare pid namespace\n"
msgstr "  -p, --pid[=<bestand>]    PID-naamsruimte scheiden\n"

#: sys-utils/unshare.c:258
msgid " -U, --user[=<file>]       unshare user namespace\n"
msgstr "  -U, --user[=<bestand>]   gebruikersnaamsruimte scheiden\n"

#: sys-utils/unshare.c:259
msgid " -C, --cgroup[=<file>]     unshare cgroup namespace\n"
msgstr "  -C, --cgroup[=<bestand>] controlgroepnaamsruimte scheiden\n"

#: sys-utils/unshare.c:260
msgid " -f, --fork                fork before launching <program>\n"
msgstr "  -f, --fork        nieuw proces starten alvorens <programma> te starten\n"

#: sys-utils/unshare.c:261
msgid "     --mount-proc[=<dir>]  mount proc filesystem first (implies --mount)\n"
msgstr ""
"      --mount-proc[=<map>]    het proc-bestandssysteem eerst aankoppelen\n"
"                                (impliceert '--mount')\n"

#: sys-utils/unshare.c:262
msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgstr ""
"  -r, --map-root-user         huidige gebruiker op root afbeelden\n"
"                                (impliceert '--user')\n"

#: sys-utils/unshare.c:263
msgid ""
"     --propagation slave|shared|private|unchanged\n"
"                           modify mount propagation in mount namespace\n"
msgstr ""
"      --propagation slave|shared|private|unchanged\n"
"                           propagatie in aankoppelingsnaamsruimte instellen\n"

#: sys-utils/unshare.c:265
msgid " -s, --setgroups allow|deny  control the setgroups syscall in user namespaces\n"
msgstr "  -s, --setgroups allow|deny  de setgroups-systeemaanroep toestaan of weigeren\n"

#: sys-utils/unshare.c:386
msgid "unshare failed"
msgstr "unshare() is mislukt"

#: sys-utils/unshare.c:430
msgid "child exit failed"
msgstr "afsluiten van dochter is mislukt"

#: sys-utils/unshare.c:437
msgid "options --setgroups=allow and --map-root-user are mutually exclusive"
msgstr "opties '--setgroups=allow' en '--map-root-user' gaan niet samen"

#: sys-utils/unshare.c:457
#, c-format
msgid "mount %s failed"
msgstr "aankoppelen van %s is mislukt"

#: sys-utils/wdctl.c:73
msgid "Card previously reset the CPU"
msgstr "Kaart heeft voordien de processor gereset"

#: sys-utils/wdctl.c:74
msgid "External relay 1"
msgstr "Externe doorvoer 1"

#: sys-utils/wdctl.c:75
msgid "External relay 2"
msgstr "Externe doorvoer 2"

#: sys-utils/wdctl.c:76
msgid "Fan failed"
msgstr "Ventilator is stuk"

#: sys-utils/wdctl.c:77
msgid "Keep alive ping reply"
msgstr "Antwoord op keep-alive-ping"

#: sys-utils/wdctl.c:78
msgid "Supports magic close char"
msgstr "Ondersteunt magisch afsluitingsteken"

#: sys-utils/wdctl.c:79
msgid "Reset due to CPU overheat"
msgstr "Reset wegens oververhitting van processor"

#: sys-utils/wdctl.c:80
msgid "Power over voltage"
msgstr "Voedingsspanning is te hoog"

#: sys-utils/wdctl.c:81
msgid "Power bad/power fault"
msgstr "Slechte voedingsspanning of voeding is stuk"

#: sys-utils/wdctl.c:82
msgid "Pretimeout (in seconds)"
msgstr "Pre-tijdslimiet (in seconden)"

#: sys-utils/wdctl.c:83
msgid "Set timeout (in seconds)"
msgstr "Tijdslimiet instellen (in seconden)"

#: sys-utils/wdctl.c:84
msgid "Not trigger reboot"
msgstr "Geen herstart triggeren"

#: sys-utils/wdctl.c:100
msgid "flag name"
msgstr "vlagnaam"

#: sys-utils/wdctl.c:101
msgid "flag description"
msgstr "vlagomschrijving"

#: sys-utils/wdctl.c:102
msgid "flag status"
msgstr "vlagstatus"

#: sys-utils/wdctl.c:103
msgid "flag boot status"
msgstr "vlagopstartstatus"

#: sys-utils/wdctl.c:104
msgid "watchdog device name"
msgstr "watchdog-apparaatnaam"

#: sys-utils/wdctl.c:138
#, c-format
msgid "unknown flag: %s"
msgstr "onbekende vlag: %s"

#: sys-utils/wdctl.c:177
msgid "Show the status of the hardware watchdog.\n"
msgstr ""

# FIXME: slice it up
#: sys-utils/wdctl.c:180
msgid ""
" -f, --flags <list>     print selected flags only\n"
" -F, --noflags          don't print information about flags\n"
" -I, --noident          don't print watchdog identity information\n"
" -n, --noheadings       don't print headings for flags table\n"
" -O, --oneline          print all information on one line\n"
" -o, --output <list>    output columns of the flags\n"
" -r, --raw              use raw output format for flags table\n"
" -T, --notimeouts       don't print watchdog timeouts\n"
" -s, --settimeout <sec> set watchdog timeout\n"
" -x, --flags-only       print only flags table (same as -I -T)\n"
msgstr ""

#: sys-utils/wdctl.c:196
#, c-format
msgid "The default device is %s.\n"
msgstr "Het standaardapparaat is %s.\n"

#: sys-utils/wdctl.c:199
msgid "Available columns:\n"
msgstr "Beschikbare kolommen:\n"

#: sys-utils/wdctl.c:291
#, c-format
msgid "%s: unknown flags 0x%x\n"
msgstr "%s: onbekende vlaggen 0x%x\n"

#: sys-utils/wdctl.c:321 sys-utils/wdctl.c:377
#, c-format
msgid "%s: watchdog already in use, terminating."
msgstr "%s: watchdog wordt al gebruikt -- gestopt"

#: sys-utils/wdctl.c:335 sys-utils/wdctl.c:405
#, c-format
msgid "%s: failed to disarm watchdog"
msgstr "%s: uitschakelen van watchdog is mislukt"

#: sys-utils/wdctl.c:344
#, c-format
msgid "cannot set timeout for %s"
msgstr "kan tijdslimiet voor %s niet instellen"

#: sys-utils/wdctl.c:350
#, c-format
msgid "Timeout has been set to %d second.\n"
msgid_plural "Timeout has been set to %d seconds.\n"
msgstr[0] "Tijdslimiet is ingesteld op %d seconde.\n"
msgstr[1] "Tijdslimiet is ingesteld op %d seconden.\n"

#: sys-utils/wdctl.c:384
#, c-format
msgid "%s: failed to get information about watchdog"
msgstr "%s: kan geen informatie over watchdog verkrijgen"

#: sys-utils/wdctl.c:466 sys-utils/wdctl.c:469 sys-utils/wdctl.c:472
#, c-format
msgid "%-14s %2i second\n"
msgid_plural "%-14s %2i seconds\n"
msgstr[0] "%-14s %2i seconde\n"
msgstr[1] "%-14s %2i seconden\n"

#: sys-utils/wdctl.c:467
msgid "Timeout:"
msgstr "Tijdslimiet:"

#: sys-utils/wdctl.c:470
msgid "Pre-timeout:"
msgstr "Pre-limiet:"

#: sys-utils/wdctl.c:473
msgid "Timeleft:"
msgstr "Resttijd:"

#: sys-utils/wdctl.c:605
msgid "Device:"
msgstr "Apparaat:"

#: sys-utils/wdctl.c:607
msgid "Identity:"
msgstr "Identiteit:"

#: sys-utils/wdctl.c:609
msgid "version"
msgstr "versie"

#: sys-utils/zramctl.c:73
msgid "zram device name"
msgstr "ZRAM-apparaatnaam"

#: sys-utils/zramctl.c:74
msgid "limit on the uncompressed amount of data"
msgstr "limiet op de hoeveelheid ongecomprimeerde data"

#: sys-utils/zramctl.c:75
msgid "uncompressed size of stored data"
msgstr "ongecomprimeerde grootte van opgeslagen data"

#: sys-utils/zramctl.c:76
msgid "compressed size of stored data"
msgstr "gecomprimeerde grootte van opgeslagen data"

#: sys-utils/zramctl.c:77
msgid "the selected compression algorithm"
msgstr "het geselecteerde compressiealgoritme"

#: sys-utils/zramctl.c:78
msgid "number of concurrent compress operations"
msgstr "aantal gelijktijdige compressiebewerkingen"

#: sys-utils/zramctl.c:79
msgid "empty pages with no allocated memory"
msgstr "lege pagina's zonder gereserveerd geheugen"

#: sys-utils/zramctl.c:80
msgid "all memory including allocator fragmentation and metadata overhead"
msgstr "alle geheugen, inclusief toewijzingsfragmentatie en metadata-overhead"

#: sys-utils/zramctl.c:81
msgid "memory limit used to store compressed data"
msgstr "limiet op de hoeveelheid gebruikt geheugen voor gecomprimeerde data"

#: sys-utils/zramctl.c:82
msgid "memory zram have been consumed to store compressed data"
msgstr "de hoeveelheid gebruikt geheugen voor gecomprimeerde data"

#: sys-utils/zramctl.c:83
msgid "number of objects migrated by compaction"
msgstr "aantal verplaatste objecten door compactie"

#: sys-utils/zramctl.c:378
msgid "Failed to parse mm_stat"
msgstr "ontleden van mm_stat is mislukt"

#: sys-utils/zramctl.c:525
#, c-format
msgid ""
" %1$s [options] <device>\n"
" %1$s -r <device> [...]\n"
" %1$s [options] -f | <device> -s <size>\n"
msgstr ""
"  %1$s [opties] <apparaat>\n"
"  %1$s -r <apparaat>...\n"
"  %1$s [opties] -f|<apparaat> -s <getal>\n"

#: sys-utils/zramctl.c:531
msgid "Set up and control zram devices.\n"
msgstr "Prepareert en beheert ZRAM-apparaten.\n"

#: sys-utils/zramctl.c:534
msgid " -a, --algorithm lzo|lz4   compression algorithm to use\n"
msgstr "  -a, --algorithm lzo|lz4    te gebruiken compressiealgoritme\n"

#: sys-utils/zramctl.c:535
msgid " -b, --bytes               print sizes in bytes rather than in human readable format\n"
msgstr "  -b, --bytes              groottes in bytes weergeven i.p.v. in leesbare vorm\n"

#: sys-utils/zramctl.c:536
msgid " -f, --find                find a free device\n"
msgstr "  -f, --find               een ongebruikt ZRAM-apparaat vinden\n"

#: sys-utils/zramctl.c:537
msgid " -n, --noheadings          don't print headings\n"
msgstr "  -n, --noheadings         geen kopregel tonen\n"

#: sys-utils/zramctl.c:538
msgid " -o, --output <list>       columns to use for status output\n"
msgstr "  -o, --output <lijst>     weer te geven kolommen in statusuitvoer\n"

#: sys-utils/zramctl.c:539
msgid "     --raw                 use raw status output format\n"
msgstr "      --raw                rauwe statusuitvoer produceren\n"

#: sys-utils/zramctl.c:540
msgid " -r, --reset               reset all specified devices\n"
msgstr "  -r, --reset              alle opgegeven apparaten resetten\n"

#: sys-utils/zramctl.c:541
msgid " -s, --size <size>         device size\n"
msgstr "  -s, --size <getal>       de grootte van het ZRAM-apparaat\n"

#: sys-utils/zramctl.c:542
msgid " -t, --streams <number>    number of compression streams\n"
msgstr "  -t, --streams <getal>    het aantal te gebruiken compressiestreams\n"

#: sys-utils/zramctl.c:608
#, c-format
msgid "unsupported algorithm: %s"
msgstr "niet-ondersteund algoritme: '%s'"

#: sys-utils/zramctl.c:630
msgid "failed to parse streams"
msgstr "ontleden van streamsargument is mislukt"

#: sys-utils/zramctl.c:652
msgid "option --find is mutually exclusive with <device>"
msgstr "optie '--find' gaat niet samen met <apparaat>"

#: sys-utils/zramctl.c:658
msgid "only one <device> at a time is allowed"
msgstr "er mag slechts één <apparaat> opgegeven worden"

#: sys-utils/zramctl.c:661
msgid "options --algorithm and --streams must be combined with --size"
msgstr "opties '--algorithm' en '--streams' moeten vergezeld gaan van '--size'"

#: sys-utils/zramctl.c:691 sys-utils/zramctl.c:720
#, c-format
msgid "%s: failed to reset"
msgstr "%s: resetten is mislukt"

#: sys-utils/zramctl.c:702 sys-utils/zramctl.c:710
msgid "no free zram device found"
msgstr "er is geen vrij ZRAM-apparaat gevonden"

#: sys-utils/zramctl.c:724
#, c-format
msgid "%s: failed to set number of streams"
msgstr "%s: instellen van aantal streams is mislukt"

#: sys-utils/zramctl.c:728
#, c-format
msgid "%s: failed to set algorithm"
msgstr "%s: instellen van algoritme is mislukt"

#: sys-utils/zramctl.c:731
#, c-format
msgid "%s: failed to set disksize (%ju bytes)"
msgstr "%s: instellen van schijfgrootte (%ju bytes) is mislukt"

#: term-utils/agetty.c:459
#, c-format
msgid "%s%s (automatic login)\n"
msgstr "%s%s (automatische login)\n"

#: term-utils/agetty.c:515
#, c-format
msgid "%s: can't change root directory %s: %m"
msgstr "%s: kan hoofdmap niet wijzigen naar %s: %m"

#: term-utils/agetty.c:518
#, c-format
msgid "%s: can't change working directory %s: %m"
msgstr "%s: kan huidige werkmap niet wijzigen naar %s: %m"

#: term-utils/agetty.c:521
#, c-format
msgid "%s: can't change process priority: %m"
msgstr "%s: kan procesprioriteit niet wijzigen: %m"

#: term-utils/agetty.c:532
#, c-format
msgid "%s: can't exec %s: %m"
msgstr "%s: kan %s niet uitvoeren: %m"

#: term-utils/agetty.c:563 term-utils/agetty.c:849 term-utils/agetty.c:861
#: term-utils/agetty.c:878 term-utils/agetty.c:1396 term-utils/agetty.c:1414
#: term-utils/agetty.c:1450 term-utils/agetty.c:1460 term-utils/agetty.c:1497
#: term-utils/agetty.c:1981 term-utils/agetty.c:2527
#, c-format
msgid "failed to allocate memory: %m"
msgstr "reserveren van geheugen is mislukt: %m"

#: term-utils/agetty.c:688
msgid "invalid delay argument"
msgstr "ongeldig argument van '--delay'"

#: term-utils/agetty.c:727
msgid "invalid argument of --local-line"
msgstr "ongeldig argument van '--local-line'"

#: term-utils/agetty.c:746
msgid "invalid nice argument"
msgstr "ongeldig argument van '--nice'"

#: term-utils/agetty.c:883
#, c-format
msgid "bad speed: %s"
msgstr "ongeldige snelheid: %s"

#: term-utils/agetty.c:885
msgid "too many alternate speeds"
msgstr "te veel alternatieve snelheden"

#: term-utils/agetty.c:992 term-utils/agetty.c:996 term-utils/agetty.c:1049
#, c-format
msgid "/dev/%s: cannot open as standard input: %m"
msgstr "/dev/%s: kan deze niet openen als standaardinvoer: %m"

#: term-utils/agetty.c:1015
#, c-format
msgid "/dev/%s: not a character device"
msgstr "/dev/%s: is geen byte-apparaat"

#: term-utils/agetty.c:1017
#, c-format
msgid "/dev/%s: not a tty"
msgstr "/dev/%s: is geen TTY"

#: term-utils/agetty.c:1021 term-utils/agetty.c:1053
#, c-format
msgid "/dev/%s: cannot get controlling tty: %m"
msgstr "/dev/%s: kan geen besturingsterminal verkrijgen: %m"

#: term-utils/agetty.c:1043
#, c-format
msgid "/dev/%s: vhangup() failed: %m"
msgstr "/dev/%s: vhangup() is mislukt: %m"

#: term-utils/agetty.c:1064
#, c-format
msgid "%s: not open for read/write"
msgstr "%s: is niet open voor lezen-en-schrijven"

#: term-utils/agetty.c:1069
#, c-format
msgid "/dev/%s: cannot set process group: %m"
msgstr "/dev/%s: kan procesgroep niet instellen: %m"

#: term-utils/agetty.c:1083
#, c-format
msgid "%s: dup problem: %m"
msgstr "%s: probleem met verdubbelen van standaardinvoer en -uitvoer: %m"

#: term-utils/agetty.c:1100
#, c-format
msgid "%s: failed to get terminal attributes: %m"
msgstr "%s: kan terminaleigenschappen niet bepalen: %m"

#: term-utils/agetty.c:1302 term-utils/agetty.c:1322
#, c-format
msgid "setting terminal attributes failed: %m"
msgstr "instellen van terminaleigenschappen is mislukt: %m"

#: term-utils/agetty.c:1440
msgid "cannot open os-release file"
msgstr "kan os-release-bestand niet openen"

#: term-utils/agetty.c:1618
#, c-format
msgid "failed to create reload file: %s: %m"
msgstr "aanmaken van herlaadbestand  is mislukt: %s: %m"

#: term-utils/agetty.c:1717
msgid "[press ENTER to login]"
msgstr "[druk op Enter om in te loggen]"

#: term-utils/agetty.c:1742
msgid "Num Lock off"
msgstr "NumLock uit"

#: term-utils/agetty.c:1745
msgid "Num Lock on"
msgstr "NumLock aan"

#: term-utils/agetty.c:1748
msgid "Caps Lock on"
msgstr "CapsLock aan"

#: term-utils/agetty.c:1751
msgid "Scroll Lock on"
msgstr "ScrollLock aan"

#: term-utils/agetty.c:1754
#, c-format
msgid ""
"Hint: %s\n"
"\n"
msgstr ""
"Hint: %s\n"
"\n"

#: term-utils/agetty.c:1901
#, c-format
msgid "%s: read: %m"
msgstr "%s: gelezen: %m"

#: term-utils/agetty.c:1960
#, c-format
msgid "%s: input overrun"
msgstr "%s: invoeroverloop"

#: term-utils/agetty.c:1977 term-utils/agetty.c:1985
#, c-format
msgid "%s: invalid character conversion for login name"
msgstr "%s: ongeldige tekenconversie in gebruikersnaam"

#: term-utils/agetty.c:1991
#, c-format
msgid "%s: invalid character 0x%x in login name"
msgstr "%s: ongeldig teken 0x%x in gebruikersnaam"

#: term-utils/agetty.c:2076
#, c-format
msgid "%s: failed to set terminal attributes: %m"
msgstr "%s: kan terminaleigenschappen niet instellen: %m"

#: term-utils/agetty.c:2112
#, c-format
msgid ""
" %1$s [options] <line> [<baud_rate>,...] [<termtype>]\n"
" %1$s [options] <baud_rate>,... <line> [<termtype>]\n"
msgstr ""
"  %1$s [opties] <lijn> <baudrate>,... [<terminaltype>]\n"
"  %1$s [opties] <baudrate>,... <lijn> [<terminaltype>]\n"

#: term-utils/agetty.c:2116
msgid "Open a terminal and set its mode.\n"
msgstr "Opent een terminal en stelt diens modus in.\n"

#: term-utils/agetty.c:2119
msgid " -8, --8bits                assume 8-bit tty\n"
msgstr "  -8, --8bits               een 8-bits terminal aannemen\n"

#: term-utils/agetty.c:2120
msgid " -a, --autologin <user>     login the specified user automatically\n"
msgstr "  -a, --autologin <gebruiker>   deze <gebruiker> automatisch inloggen\n"

#: term-utils/agetty.c:2121
msgid " -c, --noreset              do not reset control mode\n"
msgstr "  -c, --noreset             besturingsmodus niet resetten\n"

#: term-utils/agetty.c:2122
msgid " -E, --remote               use -r <hostname> for login(1)\n"
msgstr "  -E, --remote              optie '-r <hostnaam>' gebruiken bij 'login'(1)\n"

#: term-utils/agetty.c:2123
msgid " -f, --issue-file <file>    display issue file\n"
msgstr "  -f, --issue-file <bestand>    dit <bestand> als 'issue'-bestand weergeven\n"

#: term-utils/agetty.c:2124
msgid " -h, --flow-control         enable hardware flow control\n"
msgstr "  -h, --flow-control        hardware-flow-control inschakelen\n"

#: term-utils/agetty.c:2125
msgid " -H, --host <hostname>      specify login host\n"
msgstr "  -H, --host <hostnaam>     naam van host waarop in te loggen\n"

#: term-utils/agetty.c:2126
msgid " -i, --noissue              do not display issue file\n"
msgstr "  -i, --noissue             het 'issue'-bestand niet weergeven\n"

#: term-utils/agetty.c:2127
msgid " -I, --init-string <string> set init string\n"
msgstr "  -I, --init-string <tekenreeks>  te gebruiken initialisatietekenreeks\n"

# FIXME: comma
#: term-utils/agetty.c:2128
msgid " -J  --noclear              do not clear the screen before prompt\n"
msgstr "  -J, --noclear             scherm niet wissen voor tonen van prompt\n"

#: term-utils/agetty.c:2129
msgid " -l, --login-program <file> specify login program\n"
msgstr "  -l, --login-program <bestand>   te gebruiken 'login'-programma\n"

#: term-utils/agetty.c:2130
msgid " -L, --local-line[=<mode>]  control the local line flag\n"
msgstr "  -L, --local-line[=<modus>]    een lokale lijn afdwingen (of uitschakelen)\n"

#: term-utils/agetty.c:2131
msgid " -m, --extract-baud         extract baud rate during connect\n"
msgstr "  -m, --extract-baud        baudrate bepalen tijdens verbinden\n"

#: term-utils/agetty.c:2132
msgid " -n, --skip-login           do not prompt for login\n"
msgstr "  -n, --skip-login          niet om login prompten\n"

# FIXME: comma
#: term-utils/agetty.c:2133
msgid " -N  --nonewline            do not print a newline before issue\n"
msgstr "  -N, --nonewline           geen nieuwe regel weergeven voor 'issue'\n"

#: term-utils/agetty.c:2134
msgid " -o, --login-options <opts> options that are passed to login\n"
msgstr "  -o, --login-options <opties>  opties die aan 'login' doorgegeven worden\n"

#: term-utils/agetty.c:2135
msgid " -p, --login-pause          wait for any key before the login\n"
msgstr "  -p, --login-pause         met login wachten tot een toetsaanslag\n"

#: term-utils/agetty.c:2136
msgid " -r, --chroot <dir>         change root to the directory\n"
msgstr "  -r, --chroot <map>        hoofdmap wijzigen naar deze <map>\n"

#: term-utils/agetty.c:2137
msgid " -R, --hangup               do virtually hangup on the tty\n"
msgstr "  -R, --hangup              een virtuele 'hangup' doen op de terminal\n"

#: term-utils/agetty.c:2138
msgid " -s, --keep-baud            try to keep baud rate after break\n"
msgstr "  -s, --keep-baud           baudrate proberen te behouden na een 'break'\n"

#: term-utils/agetty.c:2139
msgid " -t, --timeout <number>     login process timeout\n"
msgstr "  -t, --timeout <getal>     tijdslimiet voor login-proces\n"

#: term-utils/agetty.c:2140
msgid " -U, --detect-case          detect uppercase terminal\n"
msgstr "  -U, --detect-case         een terminal met alleen hoofdletters detecteren\n"

#: term-utils/agetty.c:2141
msgid " -w, --wait-cr              wait carriage-return\n"
msgstr "  -w, --wait-cr             wachten op CR-teken (carriage-return)\n"

#: term-utils/agetty.c:2142
msgid "     --nohints              do not print hints\n"
msgstr "      --nohints             geen hints over Lock-toetsen geven\n"

#: term-utils/agetty.c:2143
msgid "     --nohostname           no hostname at all will be shown\n"
msgstr "      --nohostname          geen hostnaam tonen\n"

#: term-utils/agetty.c:2144
msgid "     --long-hostname        show full qualified hostname\n"
msgstr "      --long-hostname       volledige hostnaam tonen\n"

#: term-utils/agetty.c:2145
msgid "     --erase-chars <string> additional backspace chars\n"
msgstr "      --erase-chars <tekens>    extra backspace-tekens\n"

#: term-utils/agetty.c:2146
msgid "     --kill-chars <string>  additional kill chars\n"
msgstr "      --kill-chars <tekens>     extra regelwis-tekens\n"

#: term-utils/agetty.c:2147
msgid "     --chdir <directory>    chdir before the login\n"
msgstr "      --chdir <map>         vóór de aanmelding naar deze map gaan\n"

#: term-utils/agetty.c:2148
msgid "     --delay <number>       sleep seconds before prompt\n"
msgstr "      --delay <getal>       dit aantal seconden slapen vóór tonen van prompt\n"

#: term-utils/agetty.c:2149
msgid "     --nice <number>        run login with this priority\n"
msgstr "      --nice <getal>        'login' draaien met deze prioriteit\n"

#: term-utils/agetty.c:2150
msgid "     --reload               reload prompts on running agetty instances\n"
msgstr "      --reload              prompts hernieuwen op reeds draaiende agetty's\n"

#: term-utils/agetty.c:2151
msgid "     --help                 display this help and exit\n"
msgstr "      --help                deze hulptekst tonen en stoppen\n"

#: term-utils/agetty.c:2152
msgid "     --version              output version information and exit\n"
msgstr "      --version             programmaversie tonen en stoppen\n"

#: term-utils/agetty.c:2487
#, c-format
msgid "%d user"
msgid_plural "%d users"
msgstr[0] "%d gebruiker"
msgstr[1] "%d gebruikers"

#: term-utils/agetty.c:2615
#, c-format
msgid "checkname failed: %m"
msgstr "'checkname' is mislukt: %m"

#: term-utils/agetty.c:2627
#, c-format
msgid "cannot touch file %s"
msgstr "kan bestand %s niet aanraken"

#: term-utils/agetty.c:2631
msgid "--reload is unsupported on your system"
msgstr "optie '--reload' wordt niet ondersteund op uw systeem"

#: term-utils/mesg.c:75
#, c-format
msgid " %s [options] [y | n]\n"
msgstr "  %s [opties] [ y | n ]\n"

#: term-utils/mesg.c:78
msgid "Control write access of other users to your terminal.\n"
msgstr "Regelt de schrijftoegang van andere gebruikers tot uw terminal.\n"

#: term-utils/mesg.c:81
msgid " -v, --verbose  explain what is being done\n"
msgstr "  -v, --verbose    tonen wat er gedaan wordt\n"

#: term-utils/mesg.c:125
msgid "ttyname failed"
msgstr "ttyname() is mislukt"

#: term-utils/mesg.c:134
msgid "is y"
msgstr "is 'y' (ja)"

#: term-utils/mesg.c:137
msgid "is n"
msgstr "is 'n' (nee)"

#: term-utils/mesg.c:148 term-utils/mesg.c:155
#, c-format
msgid "change %s mode failed"
msgstr "verandering van modus van %s is mislukt"

#: term-utils/mesg.c:150
msgid "write access to your terminal is allowed"
msgstr "schrijftoegang tot uw terminal is toegestaan"

#: term-utils/mesg.c:157
msgid "write access to your terminal is denied"
msgstr "schrijftoegang tot uw terminal is geweigerd"

#: term-utils/mesg.c:161
#, c-format
msgid "invalid argument: %s"
msgstr "ongeldig argument: %s"

#: term-utils/script.c:160
#, c-format
msgid " %s [options] [file]\n"
msgstr "  %s [opties] [bestand]\n"

#: term-utils/script.c:163
msgid "Make a typescript of a terminal session.\n"
msgstr "Maakt een exact afschrift van een terminalsessie.\n"

#: term-utils/script.c:166
msgid ""
" -a, --append            append the output\n"
" -c, --command <command> run command rather than interactive shell\n"
" -e, --return            return exit code of the child process\n"
" -f, --flush             run flush after each write\n"
"     --force             use output file even when it is a link\n"
" -q, --quiet             be quiet\n"
" -t, --timing[=<file>]   output timing data to stderr (or to FILE)\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""
"  -a, --append            aan het uitvoerbestand toevoegen\n"
"  -c, --command OPDRACHT  deze opdracht uitvoeren i.p.v. interactieve shell\n"
"  -e, --return            de afsluitwaarde van het dochterproces retourneren\n"
"  -f, --flush             buffer leegmaken na elke schrijfopdracht\n"
"      --force             uitvoerbestand ook gebruiken als het een koppeling is\n"
"  -q, --quiet             geen meldingen geven\n"
"  -t, --timing[=BESTAND]  timingsgegevens naar standaardfoutuitvoer (of bestand)\n"
"  -V, --version           programmaversie tonen en stoppen\n"
"  -h, --help              deze hulptekst tonen en stoppen\n"
"\n"

# FIXME: backtick
#: term-utils/script.c:188
#, c-format
msgid ""
"output file `%s' is a link\n"
"Use --force if you really want to use it.\n"
"Program not started."
msgstr ""
"uitvoerbestand '%s' is een symbolische koppeling;\n"
"gebruik '--force' als u deze echt wilt gebruiken.\n"
"Script is niet gestart."

#: term-utils/script.c:200
#, c-format
msgid "Script done, file is %s\n"
msgstr "Script is beëindigd, het bestand heet '%s'.\n"

#: term-utils/script.c:263
msgid "cannot write script file"
msgstr "kan scriptbestand niet schrijven"

#: term-utils/script.c:397
#, c-format
msgid ""
"\n"
"Session terminated.\n"
msgstr ""
"\n"
"Sessie is beëindigd.\n"

#: term-utils/script.c:442
#, fuzzy, c-format
msgid "Script started on %s\n"
msgstr "Script is gestart op %s."

#: term-utils/script.c:519
#, fuzzy, c-format
msgid ""
"\n"
"Script done on %s\n"
msgstr ""
"\n"
"Script is beëindigd op %s."

#: term-utils/script.c:615
msgid "failed to get terminal attributes"
msgstr "kan terminaleigenschappen niet achterhalen"

#: term-utils/script.c:622
msgid "openpty failed"
msgstr "openpty() is mislukt"

#: term-utils/script.c:660
msgid "out of pty's"
msgstr "onvoldoende PTY's"

#: term-utils/script.c:760
#, c-format
msgid "Script started, file is %s\n"
msgstr "Script is gestart, het bestand heet '%s'.\n"

#: term-utils/scriptreplay.c:43
#, c-format
msgid " %s [-t] timingfile [typescript] [divisor]\n"
msgstr "  %s [opties] [-t] timingsbestand [scriptbestand [versnelling]]\n"

#: term-utils/scriptreplay.c:47
msgid "Play back terminal typescripts, using timing information.\n"
msgstr "Speelt terminalsessie-scripts af, gebruik makend van timingsinformatie.\n"

#: term-utils/scriptreplay.c:50
msgid ""
" -t, --timing <file>     script timing output file\n"
" -s, --typescript <file> script terminal session output file\n"
" -d, --divisor <num>     speed up or slow down execution with time divisor\n"
" -m, --maxdelay <num>    wait at most this many seconds between updates\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""
"  -t, --timing <bestand>      te gebruiken script-timingsbestand\n"
"  -s, --typescript <bestand>  te gebruiken terminalsessie-scriptbestand\n"
"  -d, --divisor <getal>       de uitvoering versnellen met deze factor\n"
"  -m, --maxdelay <getal>      maximum aantal seconden tussen updates\n"
"  -V, --version               programmaversie tonen en stoppen\n"
"  -h, --help                  deze hulptekst tonen en stoppen\n"
"\n"

#: term-utils/scriptreplay.c:112
msgid "write to stdout failed"
msgstr "schrijven naar standaarduitvoer is mislukt"

#: term-utils/scriptreplay.c:118
#, c-format
msgid "unexpected end of file on %s"
msgstr "onverwacht einde van bestand op %s"

#: term-utils/scriptreplay.c:120
#, c-format
msgid "failed to read typescript file %s"
msgstr "kan scriptbestand %s niet lezen"

#: term-utils/scriptreplay.c:184
msgid "wrong number of arguments"
msgstr "onjuist aantal argumenten"

#: term-utils/scriptreplay.c:215
#, c-format
msgid "failed to read timing file %s"
msgstr "kan timingsbestand %s niet lezen"

#: term-utils/scriptreplay.c:217
#, c-format
msgid "timing file %s: line %lu: unexpected format"
msgstr "timingsbestand %s: regel %lu heeft onverwachte opmaak"

#: term-utils/setterm.c:240
#, c-format
msgid "argument error: bright %s is not supported"
msgstr "onjuist argument: 'bright %s' wordt niet ondersteund"

#: term-utils/setterm.c:329
msgid "too many tabs"
msgstr "te veel tabs"

#: term-utils/setterm.c:384
msgid "Set the attributes of a terminal.\n"
msgstr "Stelt de eigenschappen van de terminal in.\n"

#: term-utils/setterm.c:387
msgid " --term          <terminal_name>   override TERM environment variable\n"
msgstr ""

#: term-utils/setterm.c:388
msgid " --reset                           reset terminal to power-on state\n"
msgstr ""

#: term-utils/setterm.c:389
#, fuzzy
msgid " --resize                          reset terminal rows and columns\n"
msgstr "  --version                        programmaversie tonen en stoppen\n"

#: term-utils/setterm.c:390
msgid " --initialize                      display init string, and use default settings\n"
msgstr ""

#: term-utils/setterm.c:391
msgid " --default                         use default terminal settings\n"
msgstr ""

#: term-utils/setterm.c:392
msgid " --store                           save current terminal settings as default\n"
msgstr ""

#: term-utils/setterm.c:393
msgid " --cursor        [on|off]          display cursor\n"
msgstr ""

#: term-utils/setterm.c:394
msgid " --repeat        [on|off]          keyboard repeat\n"
msgstr ""

#: term-utils/setterm.c:395
msgid " --appcursorkeys [on|off]          cursor key application mode\n"
msgstr ""

#: term-utils/setterm.c:396
msgid " --linewrap      [on|off]          continue on a new line when a line is full\n"
msgstr ""

#: term-utils/setterm.c:397
msgid " --inversescreen [on|off]          swap colors for the whole screen\n"
msgstr ""

#: term-utils/setterm.c:398
msgid " --foreground    default|<color>   set foreground color\n"
msgstr ""

#: term-utils/setterm.c:399
msgid " --background    default|<color>   set background color\n"
msgstr ""

#: term-utils/setterm.c:400
msgid " --ulcolor       [bright] <color>  set underlined text color\n"
msgstr ""

#: term-utils/setterm.c:401
msgid " --hbcolor       [bright] <color>  set bold text color\n"
msgstr ""

#: term-utils/setterm.c:402
msgid "                 <color>: black blue cyan green grey magenta red white yellow\n"
msgstr "                 <kleur> is black|blue||cyan|green|grey|magenta|red|white|yellow\n"

#: term-utils/setterm.c:403
msgid " --bold          [on|off]          bold\n"
msgstr ""

#: term-utils/setterm.c:404
msgid " --half-bright   [on|off]          dim\n"
msgstr ""

#: term-utils/setterm.c:405
msgid " --blink         [on|off]          blink\n"
msgstr ""

#: term-utils/setterm.c:406
msgid " --underline     [on|off]          underline\n"
msgstr ""

#: term-utils/setterm.c:407
msgid " --reverse       [on|off]          swap foreground and background colors\n"
msgstr ""

#: term-utils/setterm.c:408
msgid " --clear         [all|rest]        clear screen and set cursor position\n"
msgstr ""

#: term-utils/setterm.c:409
msgid " --tabs          [<number>...]     set these tab stop positions, or show them\n"
msgstr ""

#: term-utils/setterm.c:410
msgid " --clrtabs       [<number>...]     clear these tab stop positions, or all\n"
msgstr ""

#: term-utils/setterm.c:411
msgid " --regtabs       [1-160]           set a regular tab stop interval\n"
msgstr ""

#: term-utils/setterm.c:412
msgid " --blank         [0-60|force|poke] set time of inactivity before screen blanks\n"
msgstr ""

#: term-utils/setterm.c:413
msgid " --dump          [<number>]        write vcsa<number> console dump to file\n"
msgstr ""

#: term-utils/setterm.c:414
msgid " --append        [<number>]        append vcsa<number> console dump to file\n"
msgstr ""

#: term-utils/setterm.c:415
msgid " --file          <filename>        name of the dump file\n"
msgstr ""

#: term-utils/setterm.c:416
msgid " --msg           [on|off]          send kernel messages to console\n"
msgstr ""

#: term-utils/setterm.c:417
msgid " --msglevel      0-8               kernel console log level\n"
msgstr ""

# FIXME: concat with next
#: term-utils/setterm.c:418
msgid " --powersave     [on|vsync|hsync|powerdown|off]\n"
msgstr "  --powersave [on|vsync|hsync|powerdown|off]\n"

#: term-utils/setterm.c:419
msgid "                                   set vesa powersaving features\n"
msgstr ""

#: term-utils/setterm.c:420
msgid " --powerdown     [0-60]            set vesa powerdown interval in minutes\n"
msgstr ""

#: term-utils/setterm.c:421
msgid " --blength       [0-2000]          duration of the bell in milliseconds\n"
msgstr ""

#: term-utils/setterm.c:422
msgid " --bfreq         <number>          bell frequency in Hertz\n"
msgstr ""

#: term-utils/setterm.c:423
msgid " --version                         show version information and exit\n"
msgstr "  --version                        programmaversie tonen en stoppen\n"

#: term-utils/setterm.c:424
msgid " --help                            display this help and exit\n"
msgstr "  --help                           deze hulptekst tonen en stoppen\n"

#: term-utils/setterm.c:432
msgid "duplicate use of an option"
msgstr "dubbel gebruik van een optie"

#: term-utils/setterm.c:741
msgid "cannot force blank"
msgstr "kan scherm niet op zwart zetten"

#: term-utils/setterm.c:746
msgid "cannot force unblank"
msgstr "kan scherm niet uit zwartstand halen"

#: term-utils/setterm.c:752
msgid "cannot get blank status"
msgstr "kan schermtoestand niet opvragen"

#: term-utils/setterm.c:778
#, fuzzy, c-format
msgid "cannot open dump file %s for output"
msgstr "kan dumpbestand %s niet openen om te schrijven"

#: term-utils/setterm.c:820
#, c-format
msgid "terminal %s does not support %s"
msgstr "terminal %s ondersteunt %s niet"

#: term-utils/setterm.c:858
#, fuzzy
msgid "select failed"
msgstr "semctl() is mislukt"

#: term-utils/setterm.c:884
#, fuzzy
msgid "stdin does not refer to a terminal"
msgstr "Inloggen door %s op deze terminal is geweigerd."

#: term-utils/setterm.c:912
#, fuzzy, c-format
msgid "invalid cursor position: %s"
msgstr "ongeldige optie"

#: term-utils/setterm.c:934
#, fuzzy
msgid "reset failed"
msgstr "setgid() is mislukt"

#: term-utils/setterm.c:1098
msgid "cannot (un)set powersave mode"
msgstr "kan stroombesparingsmodus niet instellen"

#: term-utils/setterm.c:1117 term-utils/setterm.c:1126
msgid "klogctl error"
msgstr "klogctl() is mislukt"

#: term-utils/setterm.c:1147
msgid "$TERM is not defined."
msgstr "$TERM is niet gedefinieerd."

#: term-utils/setterm.c:1154
msgid "terminfo database cannot be found"
msgstr "kan 'terminfo'-gegevensbank niet vinden"

#: term-utils/setterm.c:1156
#, c-format
msgid "%s: unknown terminal type"
msgstr "%s: onbekend terminaltype"

#: term-utils/setterm.c:1158
msgid "terminal is hardcopy"
msgstr "terminal is een telex of printer"

#: term-utils/ttymsg.c:81
#, c-format
msgid "internal error: too many iov's"
msgstr "**interne programmafout**: te veel IOV-s"

#: term-utils/ttymsg.c:94
#, c-format
msgid "excessively long line arg"
msgstr "excessief lang argument"

#: term-utils/ttymsg.c:108
#, c-format
msgid "open failed"
msgstr "openen is mislukt"

# FIXME: cryptic
#: term-utils/ttymsg.c:147
#, c-format
msgid "fork: %m"
msgstr "fork(): %m"

#: term-utils/ttymsg.c:149
#, c-format
msgid "cannot fork"
msgstr "kan geen nieuw proces starten"

#: term-utils/ttymsg.c:182
#, c-format
msgid "%s: BAD ERROR, message is far too long"
msgstr "%s: SLECHTE FOUTMELDING, bericht is veel te lang"

#: term-utils/wall.c:85
#, c-format
msgid " %s [options] [<file> | <message>]\n"
msgstr "  %s [opties] [<bestand> | <bericht>]\n"

#: term-utils/wall.c:88
msgid "Write a message to all users.\n"
msgstr "Stuurt een bericht naar alle gebruikers.\n"

#: term-utils/wall.c:91
#, fuzzy
msgid " -g, --group <group>     only send message to group\n"
msgstr "  -g, --group <groep>             te gebruiken primaire groep\n"

#: term-utils/wall.c:92
msgid " -n, --nobanner          do not print banner, works only for root\n"
msgstr "  -n, --nobanner         geen kopregels tonen (werkt alleen voor root)\n"

#: term-utils/wall.c:93
msgid " -t, --timeout <timeout> write timeout in seconds\n"
msgstr "  -t, --timeout <duur>   na dit aantal seconden het schrijven opgeven\n"

#: term-utils/wall.c:116
#, fuzzy
msgid "invalid group argument"
msgstr "ongeldig periode-argument"

#: term-utils/wall.c:118
#, fuzzy, c-format
msgid "%s: unknown gid"
msgstr "%c: onbekende opdracht"

#: term-utils/wall.c:158
msgid "getgrouplist found more groups than sysconf allows"
msgstr ""

#: term-utils/wall.c:204
msgid "--nobanner is available only for root"
msgstr "optie '--nobanner' is alleen beschikbaar voor root"

#: term-utils/wall.c:209
#, c-format
msgid "invalid timeout argument: %s"
msgstr "ongeldige tijdslimiet: %s"

#: term-utils/wall.c:348
msgid "cannot get passwd uid"
msgstr "kan gebruikers-ID niet achterhalen"

#: term-utils/wall.c:353
msgid "cannot get tty name"
msgstr "kan naam van terminal niet achterhalen"

#: term-utils/wall.c:373
#, c-format
msgid "Broadcast message from %s@%s (%s) (%s):"
msgstr "Bericht aan allen van %s@%s (%s) (%s):"

#: term-utils/wall.c:406
#, c-format
msgid "will not read %s - use stdin."
msgstr "zal %s niet lezen;  gebruik standaardinvoer"

#: term-utils/write.c:86
#, c-format
msgid " %s [options] <user> [<ttyname>]\n"
msgstr "  %s [opties] <gebruiker> [<terminalnaam>]\n"

#: term-utils/write.c:90
msgid "Send a message to another user.\n"
msgstr "Stuurt een bericht naar een andere gebruiker.\n"

#: term-utils/write.c:117
#, c-format
msgid "effective gid does not match group of %s"
msgstr "effectieve GID komt niet overeen met groep van %s"

#: term-utils/write.c:202
#, c-format
msgid "%s is not logged in"
msgstr "%s is niet ingelogd"

#: term-utils/write.c:207
msgid "can't find your tty's name"
msgstr "kan de naam van uw terminal niet vinden"

#: term-utils/write.c:212
#, c-format
msgid "%s has messages disabled"
msgstr "%s heeft berichten uitgezet"

#: term-utils/write.c:215
#, c-format
msgid "%s is logged in more than once; writing to %s"
msgstr "%s is meerdere keren ingelogd; er wordt geschreven naar %s"

#: term-utils/write.c:238
msgid "carefulputc failed"
msgstr "carefulputc() is mislukt"

#: term-utils/write.c:280
#, c-format
msgid "Message from %s@%s (as %s) on %s at %02d:%02d ..."
msgstr "Bericht van %s@%s (als %s) op %s om %02d:%02d..."

#: term-utils/write.c:284
#, c-format
msgid "Message from %s@%s on %s at %02d:%02d ..."
msgstr "Bericht van %s@%s op %s om %02d:%02d..."

#: term-utils/write.c:331
msgid "you have write permission turned off"
msgstr "u hebt berichtentoegang uitgezet"

#: term-utils/write.c:354
#, c-format
msgid "%s is not logged in on %s"
msgstr "%s is niet ingelogd op %s"

#: term-utils/write.c:360
#, c-format
msgid "%s has messages disabled on %s"
msgstr "%s heeft berichten uitgezet op %s"

#: text-utils/col.c:134
msgid "Filter out reverse line feeds.\n"
msgstr "Filtert achterwaartse regelopschuivingen weg.\n"

#: text-utils/col.c:137
#, c-format
msgid ""
"\n"
"Options:\n"
" -b, --no-backspaces    do not output backspaces\n"
" -f, --fine             permit forward half line feeds\n"
" -p, --pass             pass unknown control sequences\n"
" -h, --tabs             convert spaces to tabs\n"
" -x, --spaces           convert tabs to spaces\n"
" -l, --lines NUM        buffer at least NUM lines\n"
" -V, --version          output version information and exit\n"
" -H, --help             display this help and exit\n"
"\n"
msgstr ""
"\n"
"Opties:\n"
"  -b, --no-backspaces   geen backspaces produceren\n"
"  -f, --fine            halve voorwaartse regelopschuiving toestaan\n"
"  -p, --pass            onbekende stuurcodereeksen doorgeven\n"
"  -h, --tabs            spaties omzetten in tabs\n"
"  -x, --spaces          tabs omzetten in spaties\n"
"  -l, --lines AANTAL    minstens dit aantal regels bufferen\n"
"  -V, --version         programmaversie tonen en stoppen\n"
"  -H, --help            deze hulptekst tonen en stoppen\n"
"\n"

#: text-utils/col.c:148 text-utils/colrm.c:69
#, c-format
msgid ""
"%s reads from standard input and writes to standard output\n"
"\n"
msgstr ""
"%s keer gelezen van standaardinvoer en geschreven naar standaarduitvoer\n"
"\n"

#: text-utils/col.c:212
msgid "bad -l argument"
msgstr "ongeldig argument van '-l'"

# Voor %s wordt één van de twee nakomende berichtjes ingevuld.
#: text-utils/col.c:339
#, c-format
msgid "warning: can't back up %s."
msgstr "Waarschuwing: kan niet terug %s."

#: text-utils/col.c:340
msgid "past first line"
msgstr "tot vóór eerste regel"

#: text-utils/col.c:340
msgid "-- line already flushed"
msgstr "-- regel is al doorgesluisd"

#: text-utils/colcrt.c:81 text-utils/column.c:551
#, c-format
msgid " %s [options] [<file>...]\n"
msgstr "  %s [opties] [<bestand>...]\n"

#: text-utils/colcrt.c:84
msgid "Filter nroff output for CRT previewing.\n"
msgstr "Filtert nroff-uitvoer voor het bekijken op een scherm.\n"

#: text-utils/colcrt.c:87
msgid " -,  --no-underlining    suppress all underlining\n"
msgstr "  -,  --no-underlining  alle onderstrepingen onderdrukken\n"

#: text-utils/colcrt.c:88
msgid " -2, --half-lines        print all half-lines\n"
msgstr "  -2, --half-lines      alle halfregels weergeven\n"

#: text-utils/colrm.c:59
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [startcol [endcol]]\n"
msgstr ""
"\n"
"Gebruik:  %s [<beginkolom> [<eindkolom>]]\n"

#: text-utils/colrm.c:64
msgid "Filter out the specified columns.\n"
msgstr "Filtert de aangegeven tekenkolommen uit.\n"

#: text-utils/colrm.c:185
msgid "first argument"
msgstr "eerste argument"

#: text-utils/colrm.c:187
msgid "second argument"
msgstr "tweede argument"

#: text-utils/column.c:217
#, fuzzy
msgid "failed to parse column"
msgstr "ontleden van klasse (bij '-c') is mislukt"

#: text-utils/column.c:227
#, fuzzy, c-format
msgid "undefined column name '%s'"
msgstr "ongedefinieerd aankoppelingspunt"

#: text-utils/column.c:278
#, fuzzy
msgid "failed to parse --table-order list"
msgstr "ontleden van wachttijdwaarde is mislukt"

#: text-utils/column.c:351
#, fuzzy
msgid "failed to parse --table-right list"
msgstr "ontleden van begin is mislukt"

#: text-utils/column.c:355
#, fuzzy
msgid "failed to parse --table-trunc list"
msgstr "ontleden van wachttijdwaarde is mislukt"

#: text-utils/column.c:359
#, fuzzy
msgid "failed to parse --table-noextreme list"
msgstr "ontleden van wachttijdwaarde is mislukt"

#: text-utils/column.c:363
#, fuzzy
msgid "failed to parse --table-wrap list"
msgstr "ontleden van begin is mislukt"

#: text-utils/column.c:367
#, fuzzy
msgid "failed to parse --table-hide list"
msgstr "ontleden van wachttijdwaarde is mislukt"

#: text-utils/column.c:398
#, c-format
msgid "line %zu: for JSON the name of the column %zu is required"
msgstr ""

#: text-utils/column.c:411
#, fuzzy
msgid "failed to allocate output data"
msgstr "reserveren van geheugen voor uitvoertabel is mislukt"

#: text-utils/column.c:554
msgid "Columnate lists.\n"
msgstr "Zet de invoer in kolommen.\n"

#: text-utils/column.c:557
#, fuzzy
msgid " -t, --table                      create a table\n"
msgstr "  -t, --table                een tabel produceren\n"

#: text-utils/column.c:558
#, fuzzy
msgid " -n, --table-name <name>          table name for JSON output\n"
msgstr "  -n, --name=<programmanaam>    fouten rapporteren onder deze naam\n"

#: text-utils/column.c:559
#, fuzzy
msgid " -O, --table-order <columns>      specify order of output columns\n"
msgstr "  -x, --sort <kolom>    uitvoer sorteren op deze <kolom>\n"

#: text-utils/column.c:560
#, fuzzy
msgid " -N, --table-columns <names>      comma separated columns names\n"
msgstr "  -o, --options <lijst>     kommagescheiden lijst van wisselgeheugenopties\n"

#: text-utils/column.c:561
msgid " -E, --table-noextreme <columns>  don't count long text from the columns to column width\n"
msgstr ""

#: text-utils/column.c:562
#, fuzzy
msgid " -H, --table-hide <columns>       don't print the columns\n"
msgstr "  -n, --noheadings       geen kopregel tonen\n"

#: text-utils/column.c:563
msgid " -R, --table-right <columns>      right align text in these columns\n"
msgstr ""

#: text-utils/column.c:564
#, fuzzy
msgid " -T, --table-truncate <columns>   truncate text in the columns when necessary\n"
msgstr "  -u, --notruncate       tekst in de kolommen niet afkappen\n"

#: text-utils/column.c:565
msgid " -W, --table-wrap <columns>       wrap text in the columns when necessary\n"
msgstr ""

#: text-utils/column.c:566
#, fuzzy
msgid " -J, --json                       use JSON output format for table\n"
msgstr "  -J, --json                uitvoer in JSON-opmaak produceren\n"

#: text-utils/column.c:569
#, fuzzy
msgid " -r, --tree <column>              column to use tree-like output for the table\n"
msgstr "  -O, --output <lijst>      te tonen kolommen in de uitvoer van '--list'\n"

#: text-utils/column.c:570
#, fuzzy
msgid " -i, --tree-id <column>           line ID to specify child-parent relation\n"
msgstr "  -g, --group <groep>             te gebruiken primaire groep\n"

#: text-utils/column.c:571
msgid " -p, --tree-parent <column>       parent to specify child-parent relation\n"
msgstr ""

#: text-utils/column.c:574
#, fuzzy
msgid " -c, --output-width <width>       width of output in number of characters\n"
msgstr "  -c, --columns <breedte>    breedte van de uitvoer in aantal tekens\n"

#: text-utils/column.c:575
#, fuzzy
msgid " -o, --output-separator <string>  columns separator for table output (default is two spaces)\n"
msgstr ""
"  -o, --output-separator <tekenreeks>    kolomscheider voor tabellenuitvoer;\n"
"                                           standaard zijn twee spaties\n"

#: text-utils/column.c:576
#, fuzzy
msgid " -s, --separator <string>         possible table delimiters\n"
msgstr "  -s, --separator <tekens>   mogelijke scheidingstekens voor tabellen\n"

#: text-utils/column.c:577
#, fuzzy
msgid " -x, --fillrows                   fill rows before columns\n"
msgstr "  -x, --fillrows             rijen eerder vullen dan kolommen\n"

#: text-utils/column.c:643
msgid "invalid columns argument"
msgstr "ongeldig aantal kolommen"

#: text-utils/column.c:662
#, fuzzy
msgid "failed to parse column names"
msgstr "ontleden van klasse (bij '-c') is mislukt"

#: text-utils/column.c:715
msgid "options --tree-id and --tree-parent are required for tree formatting"
msgstr ""

#: text-utils/column.c:723
msgid "option --table required for all --table-*"
msgstr ""

#: text-utils/column.c:726
msgid "option --table-columns required for --json"
msgstr ""

#: text-utils/hexdump.c:155 text-utils/more.c:225
#, c-format
msgid " %s [options] <file>...\n"
msgstr "  %s [opties] <bestand>...\n"

#: text-utils/hexdump.c:158
msgid "Display file contents in hexadecimal, decimal, octal, or ascii.\n"
msgstr "Toont de bestandsinhoud in hexadecimaal, decimaal, octaal, of ASCII.\n"

#: text-utils/hexdump.c:161
msgid " -b, --one-byte-octal      one-byte octal display\n"
msgstr "  -b, --one-byte-octal      enkel-bytes octale weergave\n"

#: text-utils/hexdump.c:162
msgid " -c, --one-byte-char       one-byte character display\n"
msgstr "  -c, --one-byte-char       enkel-bytes-tekenweergave\n"

#: text-utils/hexdump.c:163
msgid " -C, --canonical           canonical hex+ASCII display\n"
msgstr "  -C, --canonical           canonieke hex+ASCII-weergave\n"

#: text-utils/hexdump.c:164
msgid " -d, --two-bytes-decimal   two-byte decimal display\n"
msgstr "  -d, --two-bytes-decimal   twee-bytes decimale weergave\n"

#: text-utils/hexdump.c:165
msgid " -o, --two-bytes-octal     two-byte octal display\n"
msgstr "  -o, --two-bytes-octal     twee-bytes octale weergave\n"

#: text-utils/hexdump.c:166
msgid " -x, --two-bytes-hex       two-byte hexadecimal display\n"
msgstr "  -x, --two-bytes-hex       twee-bytes hexadecimale weergave\n"

#: text-utils/hexdump.c:167
msgid " -L, --color[=<mode>]      interpret color formatting specifiers\n"
msgstr "  -L, --color[=<wanneer>]   kleurspecificaties interpreteren\n"

#: text-utils/hexdump.c:170
msgid " -e, --format <format>     format string to be used for displaying data\n"
msgstr "  -e, --format <opmaak>     opmaaktekenreeks voor weergave van gegevens\n"

#: text-utils/hexdump.c:171
msgid " -f, --format-file <file>  file that contains format strings\n"
msgstr "  -f, --format-file <bestand>   de opmaaktekenreeksen uit dit bestand lezen\n"

#: text-utils/hexdump.c:172
msgid " -n, --length <length>     interpret only length bytes of input\n"
msgstr "  -n, --length <aantal>     slechts dit aantal bytes van de invoer verwerken\n"

#: text-utils/hexdump.c:173
msgid " -s, --skip <offset>       skip offset bytes from the beginning\n"
msgstr "  -s, --skip <aantal>       dit aantal bytes aan het begin overslaan\n"

#: text-utils/hexdump.c:174
msgid " -v, --no-squeezing        output identical lines\n"
msgstr "  -v, --no-squeezing        identieke regels ook weergeven\n"

#: text-utils/hexdump-display.c:365
msgid "all input file arguments failed"
msgstr "alle invoerbestandsargumenten zijn patat"

#: text-utils/hexdump-parse.c:55
#, c-format
msgid "bad byte count for conversion character %s"
msgstr "ongeldig byte-aantal voor conversieteken %s"

#: text-utils/hexdump-parse.c:60
#, c-format
msgid "%%s requires a precision or a byte count"
msgstr "%%s vereist een precisie of een byte-aantal"

#: text-utils/hexdump-parse.c:65
#, c-format
msgid "bad format {%s}"
msgstr "ongeldige opmaak {%s}"

#: text-utils/hexdump-parse.c:70
#, c-format
msgid "bad conversion character %%%s"
msgstr "ongeldig conversieteken %%%s"

#: text-utils/hexdump-parse.c:436
msgid "byte count with multiple conversion characters"
msgstr "byte-aantal met meerdere conversietekens"

#: text-utils/line.c:33
msgid "Read one line.\n"
msgstr "Leest één regel.\n"

#: text-utils/more.c:228
msgid "A file perusal filter for CRT viewing.\n"
msgstr "Bladert paginagewijs door tekstbestanden.\n"

#: text-utils/more.c:231
msgid " -d          display help instead of ringing bell\n"
msgstr "  -d           hulptekst tonen in plaats van bel te rinkelen\n"

#: text-utils/more.c:232
msgid " -f          count logical rather than screen lines\n"
msgstr "  -f           logische regels in plaats van schermregels tellen\n"

#: text-utils/more.c:233
msgid " -l          suppress pause after form feed\n"
msgstr "  -l           niet pauzeren bij een 'form feed'\n"

#: text-utils/more.c:234
msgid " -c          do not scroll, display text and clean line ends\n"
msgstr "  -c           niet scrollen; tekst weergeven en regeleindes opschonen\n"

#: text-utils/more.c:235
msgid " -p          do not scroll, clean screen and display text\n"
msgstr "  -p           niet scrollen; scherm schoonmaken en tekst weergeven\n"

#: text-utils/more.c:236
msgid " -s          squeeze multiple blank lines into one\n"
msgstr "  -s           meerdere lege regels tot eentje reduceren\n"

#: text-utils/more.c:237
msgid " -u          suppress underlining\n"
msgstr "  -u           geen onderstrepingen gebruiken\n"

#: text-utils/more.c:238
msgid " -<number>   the number of lines per screenful\n"
msgstr "  -<getal>     het aantal regels per schermvol\n"

#: text-utils/more.c:239
msgid " +<number>   display file beginning from line number\n"
msgstr "  +<getal>     bestand tonen beginnend vanaf dit regelnummer\n"

#: text-utils/more.c:240
msgid " +/<string>  display file beginning from search string match\n"
msgstr "  +/<tekens>   bestand tonen beginnend vanaf waar deze tekens voorkomen\n"

#: text-utils/more.c:241
msgid " -V          display version information and exit\n"
msgstr "  -V           programmaversie tonen en stoppen\n"

#: text-utils/more.c:484
#, c-format
msgid "unknown option -%s"
msgstr "onbekende optie '-%s'"

#: text-utils/more.c:508
#, c-format
msgid ""
"\n"
"*** %s: directory ***\n"
"\n"
msgstr ""
"\n"
"*** %s: map ***\n"
"\n"

#: text-utils/more.c:550
#, c-format
msgid ""
"\n"
"******** %s: Not a text file ********\n"
"\n"
msgstr ""
"\n"
"******** %s: Geen tekstbestand ********\n"
"\n"

#: text-utils/more.c:645
#, c-format
msgid "[Use q or Q to quit]"
msgstr "[Gebruik Q of q om af te sluiten]"

#: text-utils/more.c:724
#, c-format
msgid "--More--"
msgstr "--Meer--"

#: text-utils/more.c:726
#, c-format
msgid "(Next file: %s)"
msgstr "(Volgend bestand: %s)"

#: text-utils/more.c:734
#, c-format
msgid "[Press space to continue, 'q' to quit.]"
msgstr "[Druk op de spatiebalk om verder te gaan; 'q' om af te sluiten.]"

#: text-utils/more.c:1162
#, c-format
msgid "...back %d page"
msgid_plural "...back %d pages"
msgstr[0] "...%d pagina terug"
msgstr[1] "...%d pagina's terug"

#: text-utils/more.c:1210
#, c-format
msgid "...skipping %d line"
msgid_plural "...skipping %d lines"
msgstr[0] "...%d regel overslaand"
msgstr[1] "...%d regels overslaand"

#: text-utils/more.c:1248
msgid ""
"\n"
"***Back***\n"
"\n"
msgstr ""
"\n"
"***Terug***\n"
"\n"

#: text-utils/more.c:1263
msgid "No previous regular expression"
msgstr "Geen eerdere reguliere expressie"

#: text-utils/more.c:1293
msgid ""
"\n"
"Most commands optionally preceded by integer argument k.  Defaults in brackets.\n"
"Star (*) indicates argument becomes new default.\n"
msgstr ""
"\n"
"Aan de meeste opdrachten kan een geheel getal (k) voorafgaan.\n"
"De standaardwaarde staat tussen rechte haken.  Een ster (*)\n"
"geeft aan dat de gegeven k de nieuwe standaardwaarde wordt.\n"

#: text-utils/more.c:1300
msgid ""
"<space>                 Display next k lines of text [current screen size]\n"
"z                       Display next k lines of text [current screen size]*\n"
"<return>                Display next k lines of text [1]*\n"
"d or ctrl-D             Scroll k lines [current scroll size, initially 11]*\n"
"q or Q or <interrupt>   Exit from more\n"
"s                       Skip forward k lines of text [1]\n"
"f                       Skip forward k screenfuls of text [1]\n"
"b or ctrl-B             Skip backwards k screenfuls of text [1]\n"
"'                       Go to place where previous search started\n"
"=                       Display current line number\n"
"/<regular expression>   Search for kth occurrence of regular expression [1]\n"
"n                       Search for kth occurrence of last r.e [1]\n"
"!<cmd> or :!<cmd>       Execute <cmd> in a subshell\n"
"v                       Start up /usr/bin/vi at current line\n"
"ctrl-L                  Redraw screen\n"
":n                      Go to kth next file [1]\n"
":p                      Go to kth previous file [1]\n"
":f                      Display current file name and line number\n"
".                       Repeat previous command\n"
msgstr ""
"<spatie>            De volgende k regels tonen  [huidige schermgrootte]\n"
"z                   De volgende k regels tonen  [huidige schermgrootte]*\n"
"<enter>             De volgende k regels tonen  [1]*\n"
"d of ctrl-D         De tekst k regels scrollen  [11]*\n"
"q of Q of ctrl-C    Afsluiten\n"
"s                   Een scherm verder en k regels overslaan  [1]\n"
"f                   Een scherm verder en k schermen overslaan  [1]\n"
"b of ctrl-B         Een scherm terug en k schermen overslaan  [1]\n"
"=                   Huidige regelnummer tonen\n"
"/<reguliere exp.>   De k-de overeenkomst van deze expressie zoeken  [1]\n"
"n                   De k-de overeenkomst van vorige expressie zoeken  [1]\n"
"'                   Terug naar waar de vorige zoekopdracht startte\n"
"!<cmd> of :!<cmd>   De opdracht <cmd> in een sub-shell uitvoeren\n"
"v                   Editor starten (beginnend op de huidige regel)\n"
"ctrl-L              Het scherm verversen (opnieuw tekenen)\n"
":n                  Naar het k-de volgende bestand  [1]\n"
":p                  Naar het k-de vorige bestand  [1]\n"
":f                  Huidige bestandsnaam en regelnummer tonen\n"
".                   De vorige opdracht herhalen\n"

#: text-utils/more.c:1373 text-utils/more.c:1379
#, c-format
msgid "[Press 'h' for instructions.]"
msgstr "[Druk op 'h' voor instructies.]"

#: text-utils/more.c:1410
#, c-format
msgid "\"%s\" line %d"
msgstr "\"%s\"  regel %d"

#: text-utils/more.c:1412
#, c-format
msgid "[Not a file] line %d"
msgstr "[Geen bestand]  regel %d"

#: text-utils/more.c:1494
msgid "  Overflow\n"
msgstr "  Overloop\n"

#: text-utils/more.c:1543
msgid "...skipping\n"
msgstr "...overslaand\n"

#: text-utils/more.c:1577
msgid ""
"\n"
"Pattern not found\n"
msgstr ""
"\n"
"Patroon niet gevonden\n"

#: text-utils/more.c:1583 text-utils/pg.c:1027 text-utils/pg.c:1173
msgid "Pattern not found"
msgstr "Patroon niet gevonden"

#: text-utils/more.c:1629
msgid "exec failed\n"
msgstr "exec() is mislukt\n"

#: text-utils/more.c:1643
msgid "can't fork\n"
msgstr "kan geen nieuw proces starten\n"

#: text-utils/more.c:1677
msgid ""
"\n"
"...Skipping "
msgstr ""
"\n"
"...Verder "

#: text-utils/more.c:1681
msgid "...Skipping to file "
msgstr "...Verder naar bestand "

#: text-utils/more.c:1683
msgid "...Skipping back to file "
msgstr "...Terug naar bestand "

#: text-utils/more.c:1973
msgid "Line too long"
msgstr "Regel is te lang"

#: text-utils/more.c:2010
msgid "No previous command to substitute for"
msgstr "Geen eerdere opdracht"

#: text-utils/pg.c:144
msgid ""
"-------------------------------------------------------\n"
"  h                       this screen\n"
"  q or Q                  quit program\n"
"  <newline>               next page\n"
"  f                       skip a page forward\n"
"  d or ^D                 next halfpage\n"
"  l                       next line\n"
"  $                       last page\n"
"  /regex/                 search forward for regex\n"
"  ?regex? or ^regex^      search backward for regex\n"
"  . or ^L                 redraw screen\n"
"  w or z                  set page size and go to next page\n"
"  s filename              save current file to filename\n"
"  !command                shell escape\n"
"  p                       go to previous file\n"
"  n                       go to next file\n"
"\n"
"Many commands accept preceding numbers, for example:\n"
"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first page).\n"
"\n"
"See pg(1) for more information.\n"
"-------------------------------------------------------\n"
msgstr ""
"-------------------------------------------------------\n"
"  h                       dit hulpscherm tonen\n"
"  q of Q                  programma afsluiten\n"
"  <Enter>                 volgende pagina\n"
"  f                       pagina overslaan\n"
"  d of ^D                 volgende halve pagina\n"
"  l                       volgende regel\n"
"  $                       laatste pagina\n"
"  /regex/                 vooruit zoeken naar reguliere expressie\n"
"  ?regex? of ^regex^      achteruit zoeken naar reguliere expressie\n"
"  . of ^L                 scherm verversen\n"
"  w of z                  paginagrootte instellen en naar volgende pagina\n"
"  s BESTAND               huidige bestand opslaan in BESTAND\n"
"  !OPDRACHT               deze OPDRACHT uitvoeren in de shell\n"
"  p                       naar vorige bestand gaan\n"
"  n                       naar volgende bestand gaan\n"
"\n"
"Veel opdrachten accepteren een voorafgaand getal, bijvoorbeeld:+1<Enter> (volgende pagina); -1<Enter> (vorige pagina); 1<Enter> (eerste pagina).\n"
"\n"
"Zie pg(1) voor meer informatie.\n"
"-------------------------------------------------------\n"

#: text-utils/pg.c:222
#, c-format
msgid " %s [options] [+line] [+/pattern/] [files]\n"
msgstr "  %s [opties] [+regel] [+/patroon/] [bestanden]\n"

#: text-utils/pg.c:226
msgid "Browse pagewise through text files.\n"
msgstr "Bladert paginagewijs door tekstbestanden.\n"

#: text-utils/pg.c:229
msgid " -number      lines per page\n"
msgstr "  -GETAL       aantal regels per pagina\n"

#: text-utils/pg.c:230
msgid " -c           clear screen before displaying\n"
msgstr "  -c           scherm wissen alvorens weergave te beginnen\n"

#: text-utils/pg.c:231
msgid " -e           do not pause at end of a file\n"
msgstr "  -e           niet pauzeren aan einde van bestand\n"

#: text-utils/pg.c:232
msgid " -f           do not split long lines\n"
msgstr "  -f           lange regels niet opsplitsen\n"

#: text-utils/pg.c:233
msgid " -n           terminate command with new line\n"
msgstr "  -n           opdracht afsluiten met regeleindeteken\n"

#: text-utils/pg.c:234
msgid " -p <prompt>  specify prompt\n"
msgstr "  -p <prompt>  te gebruiken prompt\n"

#: text-utils/pg.c:235
msgid " -r           disallow shell escape\n"
msgstr "  -r           shell-stuurtekens niet toestaan\n"

#: text-utils/pg.c:236
msgid " -s           print messages to stdout\n"
msgstr "  -s           meldingen tonen op standaarduitvoer\n"

#: text-utils/pg.c:237
msgid " +number      start at the given line\n"
msgstr "  +GETAL       bij dit regelnummer beginnen\n"

#: text-utils/pg.c:238
msgid " +/pattern/   start at the line containing pattern\n"
msgstr "  +/patroon/   bij regel beginnen die dit patroon bevat\n"

#: text-utils/pg.c:250
#, c-format
msgid "option requires an argument -- %s"
msgstr "optie vereist een argument -- %s"

#: text-utils/pg.c:256
#, c-format
msgid "illegal option -- %s"
msgstr "ongeldige optie -- %s"

#: text-utils/pg.c:359
msgid "...skipping forward\n"
msgstr "...verder...\n"

#: text-utils/pg.c:361
msgid "...skipping backward\n"
msgstr "...terug...\n"

#: text-utils/pg.c:377
msgid "No next file"
msgstr "Geen volgend bestand"

#: text-utils/pg.c:381
msgid "No previous file"
msgstr "Geen voorgaand bestand"

#: text-utils/pg.c:883
#, c-format
msgid "Read error from %s file"
msgstr "Leesfout in bestand %s"

#: text-utils/pg.c:886
#, c-format
msgid "Unexpected EOF in %s file"
msgstr "Onverwachte EOF in bestand %s"

#: text-utils/pg.c:888
#, c-format
msgid "Unknown error in %s file"
msgstr "Onbekende fout in bestand %s"

#: text-utils/pg.c:941
msgid "Cannot create temporary file"
msgstr "Kan geen tijdelijk bestand maken"

#: text-utils/pg.c:950 text-utils/pg.c:1114 text-utils/pg.c:1140
msgid "RE error: "
msgstr "Fout in reguliere expressie: "

#: text-utils/pg.c:1097
msgid "(EOF)"
msgstr "(EOF)"

#: text-utils/pg.c:1122 text-utils/pg.c:1148
msgid "No remembered search string"
msgstr "Geen eerdere zoektekst"

#: text-utils/pg.c:1203
msgid "cannot open "
msgstr "kan deze niet openen: "

#: text-utils/pg.c:1255
msgid "saved"
msgstr "opgeslagen"

#: text-utils/pg.c:1345
msgid ": !command not allowed in rflag mode.\n"
msgstr ": !opdracht is niet toegestaan in beperkte modus.\n"

#: text-utils/pg.c:1380
msgid "fork() failed, try again later\n"
msgstr "fork() is mislukt; probeer het later opnieuw\n"

#: text-utils/pg.c:1468
msgid "(Next file: "
msgstr "(Volgende bestand: "

#: text-utils/pg.c:1534
#, c-format
msgid "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"
msgstr "%s %s Copyright (C) 2000-2001 Gunnar Ritter.  Alle rechten voorbehouden.\n"

#: text-utils/pg.c:1587 text-utils/pg.c:1660
msgid "failed to parse number of lines per page"
msgstr "ontleden van regelaantal-per-pagina is mislukt"

#: text-utils/rev.c:76
#, c-format
msgid "Usage: %s [options] [file ...]\n"
msgstr "Gebruik:  %s [opties] [<bestand>...]\n"

#: text-utils/rev.c:80
msgid "Reverse lines characterwise.\n"
msgstr "Keert regels tekensgewijs achterstevoren.\n"

#: text-utils/ul.c:135
#, c-format
msgid " %s [options] [<file> ...]\n"
msgstr "  %s [opties] [<bestand>...]\n"

#: text-utils/ul.c:138
msgid "Do underlining.\n"
msgstr "Onderstreept.\n"

#: text-utils/ul.c:141
msgid " -t, -T, --terminal TERMINAL  override the TERM environment variable\n"
msgstr "  -t, -T, --terminal TERMINAL   dit soort terminal gebruiken (i.p.v. $TERM)\n"

#: text-utils/ul.c:142
msgid " -i, --indicated              underlining is indicated via a separate line\n"
msgstr "  -i, --indicated               onderstreping wordt getoond op een aparte regel\n"

#: text-utils/ul.c:203
msgid "trouble reading terminfo"
msgstr "problemen bij lezen van terminfo"

# FIXME: backtick
#: text-utils/ul.c:208
#, c-format
msgid "terminal `%s' is not known, defaulting to `dumb'"
msgstr "terminal '%s' is onbekend; 'dumb' wordt gebruikt"

#: text-utils/ul.c:298
#, c-format
msgid "unknown escape sequence in input: %o, %o"
msgstr "onbekende stuurcode in invoer: %o, %o"

#: text-utils/ul.c:623
msgid "Input line too long."
msgstr "Invoerregel is te lang."

#~ msgid "failed to add data to output table"
#~ msgstr "toevoegen van gegevens aan uitvoertabel is mislukt"

#~ msgid "failed to initialize output line"
#~ msgstr "initialiseren van uitvoerregel is mislukt"

#, fuzzy
#~ msgid "failed to create output table"
#~ msgstr "reserveren van geheugen voor uitvoertabel is mislukt"

#~ msgid "Device %s already contains a %s signature."
#~ msgstr "Apparaat %s bevat al een %s-vingerafdruk."

#~ msgid "%s: these options are mutually exclusive:"
#~ msgstr "%s: de volgende opties gaan niet samen:"

#~ msgid " -m, --mtab             search in table of mounted filesystems\n"
#~ msgstr "  -m, --mtab             in de tabel van aangekoppelde bestandssystemen zoeken\n"

#~ msgid "Suspend access to a filesystem (ext3/4, ReiserFS, JFS, XFS).\n"
#~ msgstr "Schort toegang tot een bestandssysteem (ext3/4, ReiserFS, JFS, XFS) op.\n"

#~ msgid "Clock not changed - testing only.\n"
#~ msgstr "Klok niet gewijzigd -- in testmodus.\n"

#~ msgid "No --date option specified."
#~ msgstr "Er is geen optie '--date' gegeven."

#~ msgid "--date argument too long"
#~ msgstr "argument van '--date' is te lang"

#~ msgid ""
#~ "The value of the --date option is not a valid date.\n"
#~ "In particular, it contains quotation marks."
#~ msgstr ""
#~ "Het argument van '--date' is geen geldige datum.\n"
#~ "In het bijzonder bevat het aanhalingstekens."

#~ msgid "Issuing date command: %s\n"
#~ msgstr "Uitvoering van 'date'-opdracht: %s\n"

#~ msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
#~ msgstr "Kan 'date'-programma niet in /bin/sh uitvoeren: popen() is mislukt"

#~ msgid "response from date command = %s\n"
#~ msgstr "Antwoord van 'date'-opdracht = %s\n"

#~ msgid ""
#~ "The date command issued by %s returned unexpected results.\n"
#~ "The command was:\n"
#~ "  %s\n"
#~ "The response was:\n"
#~ "  %s"
#~ msgstr ""
#~ "De 'date'-opdracht uitgevoerd door %s gaf onverwachte resultaten.\n"
#~ "De opdracht was:\n"
#~ "  %s\n"
#~ "Het antwoord was:\n"
#~ "  %s"

#~ msgid ""
#~ "The date command issued by %s returned something other than an integer where the converted time value was expected.\n"
#~ "The command was:\n"
#~ "  %s\n"
#~ "The response was:\n"
#~ " %s\n"
#~ msgstr ""
#~ "De 'date'-opdracht uitgevoerd door %s gaf geen geheel getal\n"
#~ "daar waar de geconverteerde tijdswaarde werd verwacht.\n"
#~ "De opdracht was:\n"
#~ "  %s\n"
#~ "Het antwoord was:\n"
#~ " %s\n"

#~ msgid "date string %s equates to %ld seconds since 1969.\n"
#~ msgstr "Datumtekst %s is gelijk aan %ld seconden sinds 1969.\n"

#~ msgid "Not setting system clock because running in test mode.\n"
#~ msgstr "De systeemklok wordt niet ingesteld -- in testmodus.\n"

#~ msgid "Not updating adjtime file because of testing mode.\n"
#~ msgstr "Het bestand /etc/adjtime wordt niet aangepast -- in testmodus.\n"

#~ msgid ""
#~ "Would have written the following to %s:\n"
#~ "%s"
#~ msgstr ""
#~ "Het volgende zou naar %s geschreven worden:\n"
#~ "%s"

#~ msgid ""
#~ "The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n"
#~ "This copy of hwclock was built for a machine other than Alpha\n"
#~ "(and thus is presumably not running on an Alpha now).  No action taken."
#~ msgstr ""
#~ "De kernel bewaart alleen bij Alpha's een tijdperkwaarde voor de hardwareklok.\n"
#~ "Deze versie van 'hwclock' is gemaakt voor een ander systeem dan de Alpha\n"
#~ "(en draait nu dus vermoedelijk niet op een Alpha).  Geen actie ondernomen."

#~ msgid " -c, --compare        periodically compare the system clock with the CMOS clock\n"
#~ msgstr "  -c, --compare     periodiek de systeemklok met de CMOS-klok vergelijken\n"

#~ msgid ""
#~ "     --directisa      access the ISA bus directly instead of %s\n"
#~ "     --badyear        ignore RTC's year because the BIOS is broken\n"
#~ "     --date <time>    specifies the time to which to set the hardware clock\n"
#~ "     --epoch <year>   specifies the year which is the beginning of the\n"
#~ "                        hardware clock's epoch value\n"
#~ msgstr ""
#~ "      --directisa   de ISA-bus direct benaderen in plaats van via %s\n"
#~ "      --badyear     het jaartal van de hardwareklok negeren omdat de BIOS stuk is\n"
#~ "      --date=TIJD   de tijd waarop de hardwareklok moet worden ingesteld\n"
#~ "      --epoch=JAAR  het jaartal dat het tijdperkbegin voor de hardwareklok is\n"

#~ msgid ""
#~ " -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
#~ "      tell hwclock the type of Alpha you have (see hwclock(8))\n"
#~ "\n"
#~ msgstr ""
#~ "  -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
#~ "                   het soort Alpha dat u gebruikt  (zie hwclock(8))\n"
#~ "\n"

#~ msgid "Sorry, only the superuser can use the Hardware Clock."
#~ msgstr "Sorry, alleen root kan de hardwareklok instellen."

#~ msgid "%s takes no non-option arguments.  You supplied %d.\n"
#~ msgstr ""
#~ "%s kent geen andere argumenten dan functies en opties.\n"
#~ "U gaf %d.\n"

#~ msgid "No usable set-to time.  Cannot set clock."
#~ msgstr "Geen bruikbare insteltijd.  Kan klok niet instellen."

#~ msgid "booted from MILO\n"
#~ msgstr "### opgestart vanuit MILO\n"

#~ msgid "Ruffian BCD clock\n"
#~ msgstr "### Ruffiaanse BCD-klok\n"

#~ msgid "clockport adjusted to 0x%x\n"
#~ msgstr "### klokpoort aangepast naar 0x%x\n"

#~ msgid "funky TOY!\n"
#~ msgstr "### vreemde tijd-van-het-jaar!\n"

#~ msgid "atomic %s failed for 1000 iterations!"
#~ msgstr "atomische %s is duizend keer mislukt!"

#~ msgid "cmos_read(): write to control address %X failed"
#~ msgstr "### cmos_read(): schrijven naar besturingsadres %X is mislukt"

#~ msgid "cmos_read(): read from data address %X failed"
#~ msgstr "### cmos_read(): lezen van data-adres %X is mislukt"

#~ msgid "cmos_write(): write to control address %X failed"
#~ msgstr "### cmos_write(): schrijven naar besturingsadres %X is mislukt"

#~ msgid "cmos_write(): write to data address %X failed"
#~ msgstr "### cmos_write(): schrijven naar data-adres %X is mislukt"

#~ msgid "I failed to get permission because I didn't try."
#~ msgstr "Geen toestemming gekregen, want niet geprobeerd."

#~ msgid "unable to get I/O port access:  the iopl(3) call failed."
#~ msgstr "Kan geen I/O-poorttoegang krijgen: iopl(3) is mislukt."

#~ msgid "Probably you need root privileges.\n"
#~ msgstr "Waarschijnlijk hebt u root-privileges nodig.\n"

#~ msgid "error: can not set signal handler"
#~ msgstr "fout: kan geen signaalverwerker instellen"

#~ msgid "error: can not restore signal handler"
#~ msgstr "fout: kan signaalverwerker niet herstellen"

#~ msgid "only root can mount %s on %s"
#~ msgstr "alleen root kan %s aankoppelen op %s"

#~ msgid "%s is used as read only loop, mounting read-only"
#~ msgstr "%s wordt gebruikt als alleen-lezen lus; wordt als alleen-lezen aangekoppeld"

#~ msgid ""
#~ "%s: more filesystems detected. This should not happen,\n"
#~ "       use -t <type> to explicitly specify the filesystem type or\n"
#~ "       use wipefs(8) to clean up the device."
#~ msgstr ""
#~ "%s: Er zijn meerdere bestandssystemen gedetecteerd.\n"
#~ "    Dit zou niet mogen gebeuren.  Gebruik '-t SOORT' om expliciet de\n"
#~ "    bestandssysteemsoort aan te geven, of gebruik wipefs(8) om het\n"
#~ "    apparaat op te schonen."

#~ msgid "I could not determine the filesystem type, and none was specified"
#~ msgstr "kan bestandssysteemsoort niet bepalen, en er is geen aangegeven"

#~ msgid "you must specify the filesystem type"
#~ msgstr "u moet een bestandssysteemsoort aangeven"

#~ msgid "mount source not defined"
#~ msgstr "aankoppelingsbron is niet gedefinieerd"

#~ msgid "%s: mount failed"
#~ msgstr "%s: aankoppelen is mislukt"

#~ msgid "%s: filesystem mounted, but mount(8) failed"
#~ msgstr "%s: bestandssysteem is aangekoppeld, maar mount(8) is mislukt"

#~ msgid "%s is busy"
#~ msgstr "%s is bezig"

#~ msgid "       %s is already mounted on %s\n"
#~ msgstr "       %s is al aangekoppeld op %s\n"

#~ msgid "%s not mounted or bad option"
#~ msgstr "%s is nog niet aangekoppeld, of een ongeldige optie"

#~ msgid ""
#~ "       (for several filesystems (e.g. nfs, cifs) you might\n"
#~ "       need a /sbin/mount.<type> helper program)\n"
#~ msgstr ""
#~ "       (voor sommige bestandssystemen (bijvoorbeeld nfs of cifs) kan\n"
#~ "       een /sbin/mount.<type> hulpprogramma nodig zijn)\n"

#~ msgid ""
#~ "\n"
#~ "       In some cases useful info is found in syslog - try\n"
#~ "       dmesg | tail or so.\n"
#~ msgstr ""
#~ "\n"
#~ "       Soms staat er nuttige informatie in het systeemlog --\n"
#~ "       probeer zoiets als:  dmesg | tail\n"

#~ msgid "unrecognized option '%c'"
#~ msgstr "onbekende optie '%c'"

#~ msgid "%s: umount failed"
#~ msgstr "%s: afkoppelen is mislukt"

#~ msgid ""
#~ "%s: target is busy\n"
#~ "        (In some cases useful info about processes that\n"
#~ "         use the device is found by lsof(8) or fuser(1).)"
#~ msgstr ""
#~ "%s: doel is bezig\n"
#~ "        (Welke processen het apparaat gebruiken kan mogelijk\n"
#~ "         gevonden worden met behulp van lsof(8) of fuser(1).)"

#~ msgid "%s: mountpoint not found"
#~ msgstr "%s: aankoppelingspunt is niet gevonden"

#~ msgid "line %d is too long, output will be truncated"
#~ msgstr "regel %d is te lang; uitvoer wordt afgekapt"

#~ msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
#~ msgstr "onvolledige schrijfactie naar '%s' (%zd geschreven, %zd verwacht)\n"

#~ msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
#~ msgstr "%s: kan geen 'inotify'-wachter toevoegen (maximum aantal is bereikt)"

#~ msgid " %s [option] <file>\n"
#~ msgstr "  %s [optie] <bestand>\n"

#~ msgid "Follow the growth of a log file.\n"
#~ msgstr "Volgt de groei van een logbestand.\n"

#~ msgid " -n, --lines <number>   output the last <number> lines\n"
#~ msgstr "  -n, --lines <aantal>    dit <aantal> laatste regels tonen\n"

#~ msgid " -<number>              same as '-n <number>'\n"
#~ msgstr "  -<aantal>               hetzelfde als '-n <aantal>'\n"

#~ msgid "Warning: use of 'tailf' is deprecated, use 'tail -f' instead.\n"
#~ msgstr "Waarschuwing: 'tailf' is verouderd -- gebruik liever 'tail -f'.\n"

#~ msgid "no input file specified"
#~ msgstr "geen invoerbestandsnaam gegeven"

#~ msgid "%s: is not a file"
#~ msgstr "%s: is geen bestand"

#~ msgid "Filesystem label:"
#~ msgstr "Bestandssysteemlabel:"

#~ msgid "failed to set PATH"
#~ msgstr "instellen van PATH is mislukt"

# FIXME: add translator comment
#~ msgid "%d"
#~ msgstr "%d"

#~ msgid "use of 'kill --pid' option as command name is deprecated"
#~ msgstr "gebruik van 'pid' in plaats van 'kill --pid' is verouderd"

#~ msgid "%4d-%.2d-%.2d %02d:%02d:%02d.%06ld%+02d:%02d\n"
#~ msgstr "%4d-%.2d-%.2d %02d:%02d:%02d.%06ld%+02d:%02d\n"

#~ msgid "bad timeout value: %s"
#~ msgstr "ongeldige tijdslimiet: %s"

#~ msgid "expected a number, but got '%s'"
#~ msgstr "er werd een getal verwacht, maar '%s' werd gevonden"

#~ msgid "divisor '%s'"
#~ msgstr "versnelling is '%s'"

#~ msgid "argument error: %s"
#~ msgstr "onjuist argument: %s"

#~ msgid "tty path %s too long"
#~ msgstr "terminalpad %s is te lang"

#~ msgid "%s is not a block special device"
#~ msgstr "%s is geen blok-apparaat"

#~ msgid "%s: device is misaligned"
#~ msgstr "%s: apparaat is onjuist uitgelijnd"

#~ msgid "OS/2 hidden C: drive"
#~ msgstr "OS/2 verborgen C:"

#~ msgid "%s: parse error at line %d"
#~ msgstr "%s: ontledingsfout op regel %d"

#~ msgid "%s: failed to get device path"
#~ msgstr "%s: kan apparaatpad niet achterhalen"

#~ msgid "%s: unknown device name"
#~ msgstr "%s: onbekende apparaatnaam"

#~ msgid "%s: failed to get dm name"
#~ msgstr "%s: verkrijgen van DM-naam is mislukt"

#~ msgid "the sort column has to be among the output columns"
#~ msgstr "de sorteerkolom moet bij de uitgevoerde kolommen zitten"

#~ msgid ""
#~ " -p, --pid <path>        path to pid file\n"
#~ " -s, --socket <path>     path to socket\n"
#~ " -T, --timeout <sec>     specify inactivity timeout\n"
#~ " -k, --kill              kill running daemon\n"
#~ " -r, --random            test random-based generation\n"
#~ " -t, --time              test time-based generation\n"
#~ " -n, --uuids <num>       request number of uuids\n"
#~ " -P, --no-pid            do not create pid file\n"
#~ " -F, --no-fork           do not daemonize using double-fork\n"
#~ " -S, --socket-activation do not create listening socket\n"
#~ " -d, --debug             run in debugging mode\n"
#~ " -q, --quiet             turn on quiet mode\n"
#~ "\n"
#~ msgstr ""
#~ "  -p, --pid <pad>          pad naar PID-bestand\n"
#~ "  -s, --socket <pad>       pad naar socket\n"
#~ "  -T, --timeout <tijd>     maximale tijd van inactiviteit (in seconden)\n"
#~ "  -k, --kill               een draaiende uuidd-dienst elimineren\n"
#~ "  -r, --random             aanmaak van willekeurige UUID's testen\n"
#~ "  -t, --time               aanmaak van tijds-UUID's testen\n"
#~ "  -n, --uuids <aantal>     dit aantal UUID's genereren\n"
#~ "  -P, --no-pid             geen PID-bestand aanmaken\n"
#~ "  -F, --no-fork            niet tot achtergronddienst maken\n"
#~ "  -S, --socket-activation  geen luisterende socket aanmaken\n"
#~ "  -d, --debug              debugging-meldingen weergeven\n"
#~ "  -q, --quiet              geen meldingen geven\n"
#~ "\n"

#~ msgid "unknown scheduling policy"
#~ msgstr "onbekend scheduling-beleid"

#, fuzzy
#~ msgid ""
#~ " -o, --offset <num>  offset in bytes to discard from\n"
#~ " -l, --length <num>  length of bytes to discard from the offset\n"
#~ " -p, --step <num>    size of the discard iterations within the offset\n"
#~ " -s, --secure        perform secure discard\n"
#~ " -v, --verbose       print aligned length and offset\n"
#~ msgstr ""
#~ "  -o, --offset <getal>   bytepositie vanaf waar blokken verworpen moeten worden\n"
#~ "  -l, --length <getal>   lengte (in bytes) van gebied waarin naar ongebruikte\n"
#~ "                           blokken gezocht moet worden\n"
#~ "  -s, --secure           de verwerping op veilige wijze uitvoeren\n"
#~ "  -v, --verbose          het aantal verworpen bytes tonen\n"

#~ msgid "%s  .%06d seconds\n"
#~ msgstr "%s  .%06d seconden\n"

#~ msgid "%s: parse error: ignore entry at line %d."
#~ msgstr "%s: ontledingsfout: het item op regel %d wordt genegeerd"

#~ msgid "pages"
#~ msgstr "pagina's"

#~ msgid "Device open in read-only mode."
#~ msgstr "Apparaat is geopend in alleenlezen-modus."

#~ msgid " -v  be verbose\n"
#~ msgstr "  -v    gedetailleerde uitvoer produceren\n"

#~ msgid ""
#~ "Very long (%zu bytes) filename `%s' found.\n"
#~ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile.  Exiting."
#~ msgstr ""
#~ "Erg lange bestandsnaam '%2$s' gevonden (%1$zu bytes);\n"
#~ "verhoog MAX_INPUT_NAMELEN in mkcramfs.c en hercompileer -- gestopt"

#~ msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#~ msgstr "Gebruik:  %s [-c | -l bestandsnaam] [-nXX] [-iXX] /dev/naam [blokken]"

#~ msgid "%s: unable to allocate buffer for superblock"
#~ msgstr "%s: reserveren van buffer voor superblok is mislukt"

#~ msgid "%s: unable to allocate buffers for maps"
#~ msgstr "%s: reserveren van buffers voor bitkaarten is mislukt"

#~ msgid "%s: unable to allocate buffer for inodes"
#~ msgstr "%s: reserveren van buffer voor inodes is mislukt"

#~ msgid "%s: bad inode size"
#~ msgstr "%s: ongeldige inode-grootte"

#~ msgid "will not try to make filesystem on '%s'"
#~ msgstr "zal niet proberen een bestandssysteem te maken op '%s'"

#~ msgid "disk: %.*s"
#~ msgstr "schijf: %.*s"

#~ msgid "label: %.*s"
#~ msgstr "label: %.*s"

#~ msgid "flags: %s"
#~ msgstr "vlaggen: %s"

#~ msgid "bytes/sector: %ld"
#~ msgstr "bytes/sector: %ld"

#~ msgid "sectors/track: %ld"
#~ msgstr "sectoren/spoor: %ld"

#~ msgid "tracks/cylinder: %ld"
#~ msgstr "sporen/cilinder: %ld"

#~ msgid "sectors/cylinder: %ld"
#~ msgstr "sectoren/cilinder: %ld"

#~ msgid "cylinders: %ld"
#~ msgstr "cilinders: %ld"

#~ msgid "interleave: %d"
#~ msgstr "tussenruimte: %d"

#~ msgid "headswitch: %ld (milliseconds)"
#~ msgstr "overschakelen van kop: %ld (milliseconden)"

#~ msgid "track-to-track seek: %ld (milliseconds)"
#~ msgstr "spoor-tot-spoor 'seek': %ld (milliseconden)"

#~ msgid "partitions: %d"
#~ msgstr "partities: %d"

#~ msgid "You cannot change a partition into an extended one or vice versa. Delete it first."
#~ msgstr ""
#~ "U kunt een gewone partitie niet veranderen in een uitgebreide of andersom.\n"
#~ "Verwijder de partitie eerst."

#~ msgid ""
#~ "Label geometry: %d heads, %llu sectors\n"
#~ "                %llu cylinders, %d physical cylinders\n"
#~ "                %d extra sects/cyl, interleave %d:1\n"
#~ msgstr ""
#~ "Labelgeometrie: %d koppen, %llu sectoren\n"
#~ "                %llu cilinders, %d fysieke cilinders\n"
#~ "                %d extra sectoren/cilinder, tussenruimte %d:1\n"

#~ msgid ""
#~ "Label geometry: %d rpm, %d alternate and %d physical cylinders,\n"
#~ "                %d extra sects/cyl, interleave %d:1"
#~ msgstr ""
#~ "Labelgeometrie: %d rpm, %d alternatieve en %d fysieke cilinders\n"
#~ "                %d extra sectoren/cilinder, tussenruimte %d:1"

#~ msgid "<none>"
#~ msgstr "<geen>"

#~ msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
#~ msgstr "Gebruik:  last [-#] [-f bestand] [-t tty] [-h hostnaam] [gebruiker ...]\n"

#~ msgid "  still logged in"
#~ msgstr "  nog ingelogd"

#~ msgid ""
#~ "\n"
#~ "wtmp begins %s"
#~ msgstr ""
#~ "\n"
#~ "wtmp begint %s"

#~ msgid ""
#~ "\n"
#~ "interrupted %10.10s %5.5s \n"
#~ msgstr ""
#~ "\n"
#~ "onderbroken %10.10s %5.5s \n"

#~ msgid ""
#~ " -p, --pid <pid>        process id\n"
#~ " -o, --output <list>    define which output columns to use\n"
#~ " -n, --noheadings       don't print headings\n"
#~ " -r, --raw              use the raw output format\n"
#~ " -u, --notruncate       don't truncate text in columns\n"
#~ msgstr ""
#~ "  -p, --pid <PID>         alleen vergrendelingen van dit proces tonen\n"
#~ "  -o, --output <lijst>    te tonen uitvoerkolommen\n"
#~ "  -n, --noheadings        geen kolomkoppen weergeven\n"
#~ "  -r, --raw               ruwe uitvoeropmaak gebruiken\n"
#~ "  -u, --notruncate        tekst binnen kolommen niet afkappen\n"

#~ msgid ""
#~ "\n"
#~ "Scheduling policies:\n"
#~ "  -b | --batch         set policy to SCHED_BATCH\n"
#~ "  -f | --fifo          set policy to SCHED_FIFO\n"
#~ "  -i | --idle          set policy to SCHED_IDLE\n"
#~ "  -o | --other         set policy to SCHED_OTHER\n"
#~ "  -r | --rr            set policy to SCHED_RR (default)\n"
#~ msgstr ""
#~ "\n"
#~ "Scheduling-beleid:\n"
#~ "  -b | --batch          beleid op SCHED_BATCH instellen\n"
#~ "  -f | --fifo           beleid op SCHED_FIFO instellen\n"
#~ "  -i | --idle           beleid op SCHED_IDLE instellen\n"
#~ "  -o | --other          beleid op SCHED_OTHER instellen\n"
#~ "  -r | --rr             beleid op SCHED_RR instellen (standaard)\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ "  -a | --all-tasks     operate on all the tasks (threads) for a given pid\n"
#~ "  -m | --max           show min and max valid priorities\n"
#~ "  -p | --pid           operate on existing given pid\n"
#~ "  -v | --verbose       display status information\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "Opties:\n"
#~ "  -a | --all-tasks      alle taken/threads van de gegeven PID aanpakken\n"
#~ "  -m | --max            minimum en maximum geldige prioriteiten tonen\n"
#~ "  -p | --pid            de gegeven bestaande PID beïnvloeden\n"
#~ "  -v | --verbose        statusinformatie tonen\n"
#~ "\n"

#~ msgid "invalid argument to --manualeject/-i option"
#~ msgstr "ongeldig argument van optie '--manualeject' (-i)"

#~ msgid "Sorry, only the superuser can change the System Clock."
#~ msgstr "Sorry, alleen root kan de systeemklok instellen."

#~ msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
#~ msgstr "Sorry, alleen root kan in de kernel de tijdperkwaarde voor de klok instellen."

#~ msgid "read() to %s to wait for clock tick failed"
#~ msgstr "read() van %s voor wachten op kloktik is mislukt"

#, fuzzy
#~ msgid ""
#~ " -v, --verbose           say what is being done\n"
#~ " -V, --version           display version information and exit\n"
#~ " -w, --rw, --read-write  mount the filesystem read-write (default)\n"
#~ msgstr "  -v, --verbose    vermelden wat er gedaan wordt\n"

#~ msgid "set rtc alarm failed"
#~ msgstr "zetten van de wekker is mislukt"

#~ msgid "enable rtc alarm failed"
#~ msgstr "inschakelen van de wekker is mislukt"

#~ msgid "suspend to \"%s\" unavailable"
#~ msgstr "toestand opslaan naar \"%s\" is niet beschikbaar"

#~ msgid "bad value"
#~ msgstr "ongeldige waarde"

#~ msgid " -m, --mount               unshare mounts namespace\n"
#~ msgstr "  -m, --mount       naamsruimte voor aankoppelingen niet delen\n"

#~ msgid " -u, --uts                 unshare UTS namespace (hostname etc)\n"
#~ msgstr "  -u, --uts         UTS-naamsruimte niet delen (hostnaam en dergelijke)\n"

#~ msgid " -i, --ipc                 unshare System V IPC namespace\n"
#~ msgstr "  -i, --ipc         IPC-naamsruimte niet delen (semaforen en dergelijke)\n"

#~ msgid " -n, --net                 unshare network namespace\n"
#~ msgstr "  -n, --net         netwerknaamsruimte niet delen\n"

#~ msgid " -U, --user                unshare user namespace\n"
#~ msgstr "  -U, --user        naamsruimte van gebruikers niet delen (UID's, GID's, en zo)\n"

#~ msgid "cannot open %s: %m"
#~ msgstr "kan %s niet openen: %m"

#~ msgid "Minimal size is %ju"
#~ msgstr "Minimum grootte is %ju"

#~ msgid "Help Screen for cfdisk"
#~ msgstr "Hulpscherm voor 'cfdisk'"

#~ msgid "Copyright (C) 2014 Karel Zak <kzak@redhat.com> "
#~ msgstr "Copyright © Karel Zak <kzak@redhat.com> 2014 "

#~ msgid "Based on the original cfdisk from Kevin E. Martin & aeb."
#~ msgstr "Gebaseerd op de originele 'cfdisk' van Kevin E. Martin & aeb."

#~ msgid "Too small partition size specified."
#~ msgstr "Opgegeven partitiegrootte is te klein."

#~ msgid "stat failed %s"
#~ msgstr "opvragen van status van %s is mislukt"

#~ msgid ""
#~ "\n"
#~ "Sets or gets the IO scheduling class and priority of processes.\n"
#~ msgstr ""
#~ "\n"
#~ "Toont of zet de invoer/uitvoer-scheduling-klasse en prioriteit van processen.\n"

#~ msgid "Please, select a type to create a new disk label."
#~ msgstr "Kies een type om een nieuw schijflabel aan te maken."

#~ msgid "Usage: %s [options] device\n"
#~ msgstr "Gebruik:  %s [opties] apparaat\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -n, --no-verify  disable the verification after the format\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "Opties:\n"
#~ "  -n, --no-verify    geen controle uitvoeren na het formatteren\n"
#~ "\n"

#~ msgid "Usage:\n"
#~ msgstr "Gebruik:\n"

#~ msgid "Bad swap header size, no label written."
#~ msgstr "Onjuiste grootte van kop van wisselgeheugen; er is geen label geschreven."

#~ msgid "seek error on %s - cannot seek to %lu"
#~ msgstr "'seek'-fout op %s -- kan geen 'seek' doen naar %lu"

#~ msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x"
#~ msgstr "'seek'-fout: 0x%08x%08x verwacht, 0x%08x%08x gekregen"

#~ msgid "read error on %s - cannot read sector %llu"
#~ msgstr "fout bij lezen van %s -- kan sector %llu niet lezen"

#~ msgid "write error on %s - cannot write sector %llu"
#~ msgstr "fout bij schrijven naar %s -- kan sector %llu niet schrijven"

#~ msgid "cannot open partition sector save file (%s)"
#~ msgstr "kan partitionerings-bewaarbestand (%s) niet openen"

#~ msgid "write error on %s"
#~ msgstr "fout bij schrijven naar %s"

#~ msgid "cannot stat partition restore file (%s)"
#~ msgstr "kan status van partitionerings-herstelbestand (%s) niet bepalen"

#~ msgid "partition restore file has wrong size - not restoring"
#~ msgstr "partitionerings-herstelbestand heeft onjuiste grootte -- geen herstelling"

#~ msgid "cannot open partition restore file (%s)"
#~ msgstr "kan partitionerings-herstelbestand (%s) niet openen"

#~ msgid "error reading %s"
#~ msgstr "fout bij lezen van %s"

#~ msgid "cannot open device %s for writing"
#~ msgstr "kan apparaat %s niet openen om te schrijven"

#~ msgid "error writing sector %lu on %s"
#~ msgstr "fout bij schrijven van sector %lu op %s"

#~ msgid "Disk %s: cannot get geometry"
#~ msgstr "Schijf %s: kan geometrie niet achterhalen"

#~ msgid "Disk %s: cannot get size"
#~ msgstr "Schijf %s: kan grootte niet achterhalen"

#~ msgid ""
#~ "Warning: start=%lu - this looks like a partition rather than\n"
#~ "the entire disk. Using fdisk on it is probably meaningless.\n"
#~ "[Use the --force option if you really want this]"
#~ msgstr ""
#~ "Waarschuwing: begin=%lu -- dit ziet er uit als een partitie\n"
#~ "in plaats van een gehele schijf.  Hierop 'fdisk' gebruiken\n"
#~ "is waarschijnlijk zinloos.\n"
#~ "(Gebruik de optie '--force' als u dit echt wilt doen.)"

#~ msgid "Warning: HDIO_GETGEO says that there are %lu heads"
#~ msgstr "Waarschuwing: ioctl(HDIO_GETGEO) zegt dat er %lu koppen zijn"

#~ msgid "Warning: HDIO_GETGEO says that there are %lu sectors"
#~ msgstr "Waarschuwing: ioctl(HDIO_GETGEO) zegt dat er %lu sectoren zijn"

#~ msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders"
#~ msgstr "Waarschuwing: ioctl(BLKGETSIZE/HDIO_GETGEO) zegt dat er %lu cilinders zijn"

#~ msgid ""
#~ "Warning: unlikely number of sectors (%lu) - usually at most 63\n"
#~ "This will give problems with all software that uses C/H/S addressing."
#~ msgstr ""
#~ "Waarschuwing: onwaarschijnlijk aantal sectoren (%lu) -- meestal hoogstens 63.\n"
#~ "Dit zal problemen geven met alle software die C/K/S-adressering gebruikt."

#~ msgid ""
#~ "\n"
#~ "Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
#~ msgstr ""
#~ "\n"
#~ "Schijf %s: %lu cilinders, %lu koppen, %lu sectoren/spoor\n"

#~ msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)"
#~ msgstr "%s van partitie %s heeft een onmogelijke waarde voor koppen: %lu (moet liggen tussen 0 en %lu)"

#~ msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)"
#~ msgstr "%s van partitie %s heeft een onmogelijke waarde voor sectoren: %lu (moet liggen tussen 1 en %lu)"

#~ msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)"
#~ msgstr "%s van partitie %s heeft een onmogelijke waarde voor cilinders: %lu (moet liggen tussen 0 en %lu)"

#~ msgid "Re-reading the partition table ...\n"
#~ msgstr "Herinlezen van partitietabel...\n"

#~ msgid ""
#~ "The command to re-read the partition table failed.\n"
#~ "Run partprobe(8), kpartx(8) or reboot your system now,\n"
#~ "before using mkfs"
#~ msgstr ""
#~ "Het opnieuw inlezen van de partitietabel is mislukt.\n"
#~ "Voer partprobe(8) of kpartx(8) uit, of herstart uw systeem nu,\n"
#~ "alvorens 'mkfs' te gebruiken."

#~ msgid "Error closing %s"
#~ msgstr "Fout bij sluiten van %s"

#~ msgid "%s: no such partition\n"
#~ msgstr "%s: die partitie bestaat niet\n"

#~ msgid "unrecognized format - using sectors"
#~ msgstr "onbekende eenheid -- \"sectoren\" wordt gebruikt"

#~ msgid "unimplemented format - using %s"
#~ msgstr "onbeschikbare eenheid -- \"%s\" wordt gebruikt"

#~ msgid "sectors"
#~ msgstr "sectoren"

#~ msgid ""
#~ "Units: cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "Eenheden: cilinders van %lu bytes, blokken van 1024 bytes, tellend vanaf %d\n"
#~ "\n"

#~ msgid "   Device Boot Start     End   #cyls    #blocks   Id  System\n"
#~ msgstr " Apparaat Opst Begin   Einde   #cils   #blokken   ID  Systeem\n"

#~ msgid ""
#~ "Units: sectors of 512 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "Eenheden: sectoren van 512 bytes, tellend vanaf %d\n"
#~ "\n"

#~ msgid "   Device Boot    Start       End   #sectors  Id  System\n"
#~ msgstr " Apparaat Opst    Begin     Einde  #sectoren  ID  Systeem\n"

#~ msgid ""
#~ "Units: blocks of 1024 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "Eenheden: blokken van 1024 bytes, tellend vanaf %d\n"
#~ "\n"

#~ msgid "   Device Boot   Start       End    #blocks   Id  System\n"
#~ msgstr " Apparaat Opst   Begin     Einde   #blokken   ID  Systeem\n"

#~ msgid ""
#~ "Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "Eenheden: 1MiB = 1024*1024 bytes, blokken van 1024 bytes, tellend vanaf %d\n"
#~ "\n"

#~ msgid "   Device Boot Start   End    MiB    #blocks   Id  System\n"
#~ msgstr " Apparaat Ops Begin  Einde    MiB   #blokken   ID  Systeem\n"

#~ msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
#~ msgstr "    begin: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n"

#~ msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
#~ msgstr "    einde: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n"

#~ msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
#~ msgstr "partitie eindigt op cilinder %ld, na het einde van de schijf\n"

#~ msgid ""
#~ "Warning: The partition table looks like it was made\n"
#~ "  for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
#~ "For this listing I'll assume that geometry."
#~ msgstr ""
#~ "Waarschuwing: het lijkt erop dat de partitietabel gemaakt is voor\n"
#~ "              C/K/S=*/%ld/%ld (in plaats van voor %ld/%ld/%ld);\n"
#~ "              dit overzicht neemt die eerste C/K/S-geometrie aan."

#~ msgid "no partition table present"
#~ msgstr "geen partitietabel aanwezig"

#~ msgid "strange, only %d partition defined"
#~ msgid_plural "strange, only %d partitions defined"
#~ msgstr[0] "vreemd: slechts %d partities gedefinieerd"
#~ msgstr[1] "vreemd: slechts %d partities gedefinieerd"

#~ msgid "Warning: partition %s has size 0 but is not marked Empty"
#~ msgstr "Waarschuwing: partitie %s heeft grootte 0, maar is niet gemarkeerd als leeg"

#~ msgid "Warning: partition %s has size 0 and is bootable"
#~ msgstr "Waarschuwing: partitie %s heeft grootte 0 én is opstartbaar"

#~ msgid "Warning: partition %s has size 0 and nonzero start"
#~ msgstr "Waarschuwing: partitie %s heeft grootte 0 maar een niet-nul beginsector"

#~ msgid "Warning: partition %s is not contained in partition %s"
#~ msgstr "Waarschuwing: partitie %s valt niet binnen partitie %s"

#~ msgid "Warning: partitions %s and %s overlap"
#~ msgstr "Waarschuwing: partities %s en %s overlappen"

#~ msgid ""
#~ "Warning: partition %s contains part of the partition table (sector %llu),\n"
#~ "and will destroy it when filled"
#~ msgstr ""
#~ "Waarschuwing: partitie %s bevat een deel van de partitietabel (sector %llu),\n"
#~ "en zal deze vernielen als zij wordt gevuld"

#~ msgid "Warning: partition %s starts at sector 0"
#~ msgstr "Waarschuwing: partitie %s begint op sector 0"

#~ msgid "Warning: partition %s extends past end of disk"
#~ msgstr "Waarschuwing: partitie %s loopt door tot voorbij het einde van de schijf"

#~ msgid ""
#~ "Warning: partition %s has size %d.%d TB (%llu bytes),\n"
#~ "which is larger than the %llu bytes limit imposed\n"
#~ "by the DOS partition table for %d-byte sectors"
#~ msgstr ""
#~ "Waarschuwing: partitie %s heeft een grootte van %d,%d TB (%llu bytes)\n"
#~ "-- dit is groter dan de limiet van %llu bytes die geldt\n"
#~ "voor een DOS-partitietabel met %d-byte sectoren."

#~ msgid ""
#~ "Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
#~ "which exceeds the DOS partition table limit of %llu sectors"
#~ msgstr ""
#~ "Waarschuwing: partitie %s begint op sector %llu (%d,%d TB bij %d-byte sectoren)\n"
#~ "-- dit is groter dan de limiet van %llu bytes die geldt voor een DOS-partitietabel."

#~ msgid ""
#~ "Among the primary partitions, at most one can be extended\n"
#~ " (although this is not a problem under Linux)"
#~ msgstr ""
#~ "Van de primaire partities kan er ten hoogste één uitgebreid zijn\n"
#~ "(onder Linux is dit echter geen probleem)."

#~ msgid "Warning: partition %s does not start at a cylinder boundary"
#~ msgstr "Waarschuwing: partitie %s begint niet op een cilindergrens"

#~ msgid "Warning: partition %s does not end at a cylinder boundary"
#~ msgstr "Waarschuwing: partitie %s eindigt niet op een cilindergrens"

#~ msgid ""
#~ "Warning: more than one primary partition is marked bootable (active)\n"
#~ "This does not matter for LILO, but the DOS MBR will not boot this disk."
#~ msgstr ""
#~ "Waarschuwing: meerdere primaire partities zijn gemarkeerd als opstartbaar.\n"
#~ "Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf opstarten."

#~ msgid ""
#~ "Warning: usually one can boot from primary partitions only\n"
#~ "LILO disregards the `bootable' flag."
#~ msgstr ""
#~ "Waarschuwing: normaal gesproken kan men alleen van primaire\n"
#~ "partities opstarten.  LILO negeert de 'opstartbaar'-vlag."

#~ msgid ""
#~ "Warning: no primary partition is marked bootable (active)\n"
#~ "This does not matter for LILO, but the DOS MBR will not boot this disk."
#~ msgstr ""
#~ "Waarschuwing: er is geen primaire partitie gemarkeerd als opstartbaar.\n"
#~ "Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf opstarten."

#~ msgid "start"
#~ msgstr "begin"

#~ msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)"
#~ msgstr "partitie %s: begin: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)"

#~ msgid "end"
#~ msgstr "einde"

#~ msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)"
#~ msgstr "partitie %s: einde: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)"

#~ msgid "partition %s ends on cylinder %ld, beyond the end of the disk"
#~ msgstr "partitie %s eindigt op cilinder %ld, na het einde van de schijf"

#~ msgid ""
#~ "Warning: shifted start of the extd partition from %lld to %lld\n"
#~ "(For listing purposes only. Do not change its contents.)"
#~ msgstr ""
#~ "Waarschuwing: begin van uitgebreide partitie is verschoven van %lld naar %lld.\n"
#~ "(Alleen voor weergave.  De inhoud wordt niet gewijzigd.)"

#~ msgid ""
#~ "Warning: extended partition does not start at a cylinder boundary.\n"
#~ "DOS and Linux will interpret the contents differently."
#~ msgstr ""
#~ "Waarschuwing: uitgebreide partitie begint niet op een cilindergrens.\n"
#~ "DOS en Linux zullen de inhoud verschillend interpreteren."

#~ msgid "ERROR: sector %llu does not have an msdos signature"
#~ msgstr "FOUT: sector %llu heeft geen MSDOS-vingerafdruk"

#~ msgid "too many partitions - ignoring those past nr (%zu)"
#~ msgstr "te veel partities -- die na nummer %zu worden genegeerd"

#~ msgid "tree of partitions?"
#~ msgstr "een boom van partities?"

#~ msgid "detected Disk Manager - unable to handle that"
#~ msgstr "Disk Manager gedetecteerd; kan dit niet aan -- gestopt"

#~ msgid "DM6 signature found - giving up"
#~ msgstr "DM6-vingerafdruk gevonden -- gestopt"

#~ msgid "strange..., an extended partition of size 0?"
#~ msgstr "vreemd... een uitgebreide partitie met grootte 0?"

#~ msgid "strange..., a BSD partition of size 0?"
#~ msgstr "vreemd... een BSD-partitie met grootte 0?"

#~ msgid "-n flag was given: Nothing changed"
#~ msgstr "optie '-n' werd gegeven: er is niets gewijzigd"

#~ msgid "Failed saving the old sectors - aborting\n"
#~ msgstr "Opslaan van oude sectoren is mislukt -- gestopt\n"

#~ msgid "Failed writing the partition on %s"
#~ msgstr "Schrijven van partitie op %s is mislukt"

#~ msgid "long or incomplete input line - quitting"
#~ msgstr "lange of incomplete invoerregel -- gestopt"

#~ msgid "input error: `=' expected after %s field"
#~ msgstr "invoerfout: '=' verwacht na veld %s"

#~ msgid "input error: unexpected character %c after %s field"
#~ msgstr "invoerfout: onverwacht teken %c na veld %s"

#~ msgid "unrecognized input: %s"
#~ msgstr "invoer niet herkend: %s"

#~ msgid "number too big"
#~ msgstr "getal is te groot"

#~ msgid "trailing junk after number"
#~ msgstr "onbegrepen tekens na getal"

#~ msgid "no room for partition descriptor"
#~ msgstr "geen ruimte voor partitiebeschrijver"

#~ msgid "cannot build surrounding extended partition"
#~ msgstr "kan omvattende uitgebreide partitie niet maken"

#~ msgid "too many input fields"
#~ msgstr "te veel invoervelden"

#~ msgid "No room for more"
#~ msgstr "Geen ruimte voor meer"

#~ msgid "Illegal type"
#~ msgstr "Onjuist type"

#~ msgid "Warning: given size (%llu) exceeds max allowable size (%llu)"
#~ msgstr "Waarschuwing: gegeven groote (%llu) is groter dan maximaal toegelaten grootte (%llu)"

#~ msgid "Warning: empty partition"
#~ msgstr "Waarschuwing: lege partitie"

#~ msgid "Warning: bad partition start (earliest %llu)"
#~ msgstr "Waarschuwing: ongeldig partitiebegin (eerste mogelijkheid is %llu)"

#~ msgid "unrecognized bootable flag - choose - or *"
#~ msgstr "onbekende 'opstartbaar'-vlag -- kies '-' of '*'"

#~ msgid "partial c,h,s specification?"
#~ msgstr "een gedeeltelijke c,k,s-specificatie?"

#~ msgid "Extended partition not where expected"
#~ msgstr "Uitgebreide partitie waar die niet verwacht werd"

#~ msgid "bad input"
#~ msgstr "ongeldige invoer"

#~ msgid "too many partitions"
#~ msgstr "te veel partities"

#~ msgid ""
#~ "Input in the following format; absent fields get a default value.\n"
#~ "<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
#~ "Usually you only need to specify <start> and <size> (and perhaps <type>)."
#~ msgstr ""
#~ "Invoer is in de volgende indeling (afwezige velden krijgen een standaardwaarde):\n"
#~ "  <begin> <grootte> <type [E,S,L,X,hex]> <opstartbaar [-,*]> <c,k,s> <c,k,s>\n"
#~ "Meestal hoeft u alleen <begin> en <grootte> te gebruiken (en mogelijk <type>)."

#~ msgid " %s [options] <device>...\n"
#~ msgstr "  %s [opties] <apparaat>...\n"

#~ msgid ""
#~ " -s, --show-size           list size of a partition\n"
#~ " -c, --id                  change or print partition Id\n"
#~ "     --change-id           change Id\n"
#~ "     --print-id            print Id\n"
#~ msgstr ""
#~ "  -s, --show-size         grootte van een partitie tonen\n"
#~ "  -c, --id                partitie-ID tonen of wijzigen\n"
#~ "      --change-id         ID wijzigen\n"
#~ "      --print-id          ID tonen\n"

#~ msgid ""
#~ " -l, --list                list partitions of each device\n"
#~ " -d, --dump                idem, but in a format suitable for later input\n"
#~ " -i, --increment           number cylinders etc. from 1 instead of from 0\n"
#~ " -u, --unit <letter>       units to be used; <letter> can be one of\n"
#~ "                             S (sectors), C (cylinders), B (blocks), or M (MB)\n"
#~ msgstr ""
#~ "  -l, --list              partities van elk gegeven apparaat tonen\n"
#~ "  -d, --dump              idem, maar in een vorm die geschikt is als invoer\n"
#~ "  -i, --increment         dingen nummeren vanaf 1 in plaats van vanaf 0\n"
#~ "  -u, --unit=<letter>     te gebruiken eenheid; <letter> mag zijn: M (MB),\n"
#~ "                            B (blokken), C (cilinders), S (sectoren)\n"

#~ msgid ""
#~ " -1, --one-only            reserved option that does nothing currently\n"
#~ " -T, --list-types          list the known partition types\n"
#~ " -D, --DOS                 for DOS-compatibility: waste a little space\n"
#~ " -E, --DOS-extended        DOS extended partition compatibility\n"
#~ " -R, --re-read             make the kernel reread the partition table\n"
#~ msgstr ""
#~ "  -1, --one-only          (gereserveerde optie; doet momenteel niets)\n"
#~ "  -T, --list-types        de mogelijke partitiesoorten tonen\n"
#~ "  -D, --DOS               DOS-compatibel zijn (een beetje ruimte verspillen)\n"
#~ "  -E, --DOS-extended      DOS-extended-compatibel zijn\n"
#~ "  -R, --re-read           de partitietabel door de kernel laten herinlezen\n"

#~ msgid ""
#~ " -N <number>               change only the partition with this <number>\n"
#~ " -n                        do not actually write to disk\n"
#~ " -O <file>                 save the sectors that will be overwritten to <file>\n"
#~ " -I <file>                 restore sectors from <file>\n"
#~ msgstr ""
#~ "  -N <nummer>             alleen de partitie met dit nummer wijzigen\n"
#~ "  -n                      niet echt naar schijf schrijven, maar doen alsof\n"
#~ "  -O <bestand>            sectoren die overschreven worden opslaan in bestand\n"
#~ "  -I <bestand>            overschreven sectoren herstellen vanuit dit bestand\n"

#~ msgid ""
#~ " -V, --verify              check that the listed partitions are reasonable\n"
#~ " -v, --version             display version information and exit\n"
#~ msgstr "  -V, --verify            controleren dat de partities consistent zijn\n"

#~ msgid ""
#~ "\n"
#~ "Dangerous options:\n"
#~ msgstr ""
#~ "\n"
#~ "Gevaarlijke opties:\n"

#~ msgid ""
#~ " -f, --force               disable all consistency checking\n"
#~ "     --no-reread           do not check whether the partition is in use\n"
#~ " -q, --quiet               suppress warning messages\n"
#~ " -L, --Linux               do not complain about things irrelevant for Linux\n"
#~ msgstr ""
#~ "  -f, --force             alle consistentiecontroles uitschakelen\n"
#~ "      --no-reread         voor herpartitioneren de partitietabel niet herlezen\n"
#~ "  -L, --Linux             niet klagen over dingen die irrelevant zijn voor Linux\n"
#~ "  -q, --quiet             waarschuwingen onderdrukken\n"

#~ msgid ""
#~ " -g, --show-geometry       print the kernel's idea of the geometry\n"
#~ " -G, --show-pt-geometry    print geometry guessed from the partition table\n"
#~ msgstr ""
#~ "  -g, --show-geometry     de geometrie tonen die door de kernel aangegeven wordt\n"
#~ "  -G, --show-pt-geometry  de geometrie tonen die uit de partitietabel blijkt\n"

#~ msgid ""
#~ " -A, --activate[=<device>] activate the bootable flag\n"
#~ " -U, --unhide[=<device>]   set partition as unhidden\n"
#~ " -x, --show-extended       also list extended partitions in the output,\n"
#~ "                             or expect descriptors for them in the input\n"
#~ msgstr ""
#~ "  -A, --activate[=<app>]  de 'opstartbaar'-vlag inschakelen\n"
#~ "  -U, --unhide[=<app>]    partitie als onverborgen markeren\n"
#~ "  -x, --show-extended     uitgebreide partities volledig weergeven in uitvoer,\n"
#~ "                            of beschrijvers ervan verwachten in invoer\n"

#~ msgid ""
#~ "     --leave-last          do not allocate the last cylinder\n"
#~ "     --IBM                 same as --leave-last\n"
#~ msgstr ""
#~ "      --leave-last        de laatste cilinder niet toewijzen\n"
#~ "      --IBM               hetzelfde als '--leave-last'\n"

#~ msgid ""
#~ "     --in-order            partitions are in order\n"
#~ "     --not-in-order        partitions are not in order\n"
#~ "     --inside-outer        all logicals inside outermost extended\n"
#~ "     --not-inside-outer    not all logicals inside outermost extended\n"
#~ msgstr ""
#~ "      --in-order          de partities zijn op volgorde\n"
#~ "      --not-in-order      de partities zijn niet op volgorde\n"
#~ "      --inside-outer      alle logische vallen binnen de buitenste uitgebreide\n"
#~ "      --not-inside-outer  niet alle logische binnen de buitenste uitgebreide\n"

#~ msgid ""
#~ "     --nested              every partition is disjoint from all others\n"
#~ "     --chained             like nested, but extended partitions may lie outside\n"
#~ "     --onesector           partitions are mutually disjoint\n"
#~ msgstr ""
#~ "      --nested            elke partitie valt binnen een uitgebreide partitie\n"
#~ "      --chained           elke logische partitie valt binnen een uitgebreide\n"
#~ "      --onesector         geen enkele partitie valt binnen een andere\n"

#~ msgid ""
#~ "\n"
#~ "Override the detected geometry using:\n"
#~ " -C, --cylinders <number>  set the number of cylinders to use\n"
#~ " -H, --heads <number>      set the number of heads to use\n"
#~ " -S, --sectors <number>    set the number of sectors to use\n"
#~ msgstr ""
#~ "\n"
#~ "U kunt een andere dan de gevonden geometrie afdwingen met:\n"
#~ "  -C, --cylinders <getal>  het aantal te gebruiken cilinders\n"
#~ "  -H, --heads <getal>      het aantal te gebruiken koppen\n"
#~ "  -S, --sectors <getal>    het aantal te gebruiken sectoren\n"

#~ msgid " %s%sdevice            list active partitions on device\n"
#~ msgstr "  %s%s<apparaat>            actieve partities op <apparaat> weergeven\n"

#~ msgid " %s%sdevice n1 n2 ...  activate partitions n1 ..., inactivate the rest\n"
#~ msgstr "  %s%s<apparaat> n1 n2 ...  gegeven partities activeren, de rest de-activeren\n"

#~ msgid "invalid number of partitions argument"
#~ msgstr "ongeldig aantal partities"

#~ msgid "usage: sfdisk --print-id device partition-number"
#~ msgstr "Gebruik:  sfdisk --print-id apparaat partitienummer"

#~ msgid "usage: sfdisk --change-id device partition-number Id"
#~ msgstr "Gebruik:  sfdisk --change-id apparaat partitienummer ID"

#~ msgid "usage: sfdisk --id device partition-number [Id]"
#~ msgstr "Gebruik:  sfdisk --id apparaat partitienummer [ID]"

#~ msgid "can specify only one device (except with -l or -s)"
#~ msgstr "slechts één apparaat is mogelijk (behalve met '-l' of '-s')"

#~ msgid "cannot open %s read-write"
#~ msgstr "kan %s niet openen voor lezen-en-schrijven"

#~ msgid "cannot open %s for reading"
#~ msgstr "kan %s niet openen om te lezen"

#~ msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
#~ msgstr "%s: %ld cilinders, %ld koppen, %ld sectoren/spoor\n"

#~ msgid "bad active byte: 0x%x instead of 0x80"
#~ msgstr "onjuiste 'actief'-byte: 0x%x in plaats van 0x80"

#~ msgid "Done"
#~ msgstr "Klaar"

#~ msgid ""
#~ "You have %d active primary partitions. This does not matter for LILO,\n"
#~ "but the DOS MBR will only boot a disk with 1 active partition."
#~ msgstr ""
#~ "U hebt %d actieve, primaire partities.  Dit maakt niets uit voor LILO,\n"
#~ "maar DOS MBR start alleen op van een schijf met 1 actieve partitie."

#~ msgid "partition %s has id %x and is not hidden"
#~ msgstr "partitie %s heeft ID %x en is niet verborgen"

#~ msgid "Bad Id %lx"
#~ msgstr "Ongeldig ID %lx"

#~ msgid "This disk is currently in use."
#~ msgstr "Deze schijf is op dit moment in gebruik."

#~ msgid "Fatal error: cannot find %s"
#~ msgstr "Fatale fout: kan %s niet vinden"

#~ msgid "Warning: %s is not a block device"
#~ msgstr "Waarschuwing: %s is geen blok-apparaat"

#~ msgid "Partition %d does not exist, cannot change it"
#~ msgstr "Partitie %d bestaat niet; kan deze dus niet veranderen!"

#~ msgid ""
#~ "I don't like these partitions - nothing changed.\n"
#~ "(If you really want this, use the --force option.)"
#~ msgstr ""
#~ "Hmm... vreemde partities -- er is niets gewijzigd.\n"
#~ "(Als u dit echt wilt, kunt u --force gebruiken.)"

#~ msgid "I don't like this - probably you should answer No"
#~ msgstr "Hmm... vreemde partities -- waarschijnlijk moet u Nee antwoorden."

#~ msgid "Are you satisfied with this? [ynq] "
#~ msgstr "Bent u hiermee tevreden? [ynq] "

#~ msgid "Quitting - nothing changed"
#~ msgstr "Gestopt -- er is niets gewijzigd."

#~ msgid "Please answer one of y,n,q\n"
#~ msgstr "Antwoord met 'y' (ja) of 'n' (nee) of 'q' (stoppen).\n"

#~ msgid ""
#~ "Successfully wrote the new partition table\n"
#~ "\n"
#~ msgstr ""
#~ "De nieuwe partitietabel is met succes weggeschreven.\n"
#~ "\n"

#~ msgid ""
#~ "If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
#~ "to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
#~ "(See fdisk(8).)"
#~ msgstr ""
#~ "Als u een DOS-partitie gemaakt of gewijzigd hebt, bijvoorbeeld /dev/foo7,\n"
#~ "gebruik dan dd(1) om de eerste 512 bytes nul te maken:\n"
#~ "  dd if=/dev/zero of=/dev/foo7 bs=512 count=1  (zie man fdisk(8))"

#~ msgid "If you have created or modified any DOS 6.x partitions, please see the fdisk documentation for additional information."
#~ msgstr ""
#~ "Als u DOS-6.x-partities gemaakt of gewijzigd hebt,\n"
#~ "raadpleeg dan het fdisk-handboek voor meer informatie."

#~ msgid "field is too long"
#~ msgstr "veld is te lang"

#~ msgid "%s: '%c' is not allowed"
#~ msgstr "%s: '%c' is niet toegestaan"

#~ msgid "'%c' is not allowed"
#~ msgstr "'%c' is niet toegestaan"

#~ msgid "%s: control characters are not allowed"
#~ msgstr "%s: stuurtekens zijn niet toegestaan"

#~ msgid "control characters are not allowed"
#~ msgstr "stuurtekens zijn niet toegestaan"

#~ msgid ""
#~ " -a, --alternative      use alternative dictionary\n"
#~ " -d, --alphanum         compare only alphanumeric characters\n"
#~ " -f, --ignore-case      ignore case differences when comparing\n"
#~ " -t, --terminate <char> define string termination character\n"
#~ "\n"
#~ msgstr ""
#~ "  -a, --alternative        een alternatief woordenboek gebruiken\n"
#~ "  -d, --alphanum           alleen alfanumerieke tekens vergelijken\n"
#~ "  -f, --ignore-case        verschil tussen hoofd- en kleine letters negeren\n"
#~ "  -t, --terminate <teken>  het teken dat een tekenreeks afsluit\n"
#~ "\n"

#~ msgid "%s: is removable device"
#~ msgstr "%s: is verwijderbaar apparaat"

#~ msgid "%s: connected by hotplug subsystem: %s"
#~ msgstr "%s: verbonden door het 'hotplug'-subsysteem: %s"

#~ msgid "timeout cannot be zero"
#~ msgstr "tijdslimiet kan niet nul zijn"

#~ msgid "Waiting in loop for time from KDGHWCLK to change\n"
#~ msgstr "Wachten in lus totdat de tijd van ioctl(KDGHWCLK) verandert...\n"

#~ msgid "KDGHWCLK ioctl to read time failed"
#~ msgstr "Het lezen van de tijd via ioctl(KDGHWCLK) is mislukt"

#~ msgid "KDGHWCLK ioctl to read time failed in loop"
#~ msgstr "Het lezen van de tijd via ioctl(KDGHWCLK) is mislukt tijdens de lus"

#~ msgid "ioctl() failed to read time from %s"
#~ msgstr "ioctl() kan geen tijd lezen uit %s"

#~ msgid "ioctl KDSHWCLK failed"
#~ msgstr "ioctl(KDSHWCLK) is mislukt"

#~ msgid "Using the KDGHWCLK interface to m68k clock."
#~ msgstr "Gebruik van KDGHWCLK-interface voor m68k-klok."

#~ msgid "Can't open /dev/tty1 or /dev/vc/1"
#~ msgstr "Openen van /dev/tty1 of /dev/vc/1 is mislukt"

#~ msgid "KDGHWCLK ioctl failed"
#~ msgstr "ioctl(KDGHWCLK) is mislukt"

#~ msgid " %s [options] <program> [args...]\n"
#~ msgstr "  %s [opties] <programma> [<argument>...]\n"

#~ msgid ""
#~ " -g, --pgrp <id>        interpret argument as process group ID\n"
#~ " -n, --priority <num>   specify the nice increment value\n"
#~ " -p, --pid <id>         interpret argument as process ID (default)\n"
#~ " -u, --user <name|id>   interpret argument as username or user ID\n"
#~ msgstr ""
#~ "  -g, --pgrp <PGID>       te beïnvloeden procesgroeps-ID\n"
#~ "  -n, --priority <getal>  te gebruiken beleefdheidstoename\n"
#~ "  -p, --pid <PID>         te beïnvloeden proces-ID\n"
#~ "  -u, --user <naam|UID>   te beïnvloeden gebruiker (naam of UID)\n"

#~ msgid " %s%s [options] [program [program arguments]]\n"
#~ msgstr "  %s%s [opties] [programma [programma-argumenten]]\n"

#, fuzzy
#~ msgid ""
#~ " -a, --all                enable all swaps from /etc/fstab\n"
#~ " -d, --discard[=<policy>] enable swap discards, if supported by device\n"
#~ " -e, --ifexists           silently skip devices that do not exist\n"
#~ " -f, --fixpgsz            reinitialize the swap space if necessary\n"
#~ " -p, --priority <prio>    specify the priority of the swap device\n"
#~ " -s, --summary            display summary about used swap devices (DEPRECATED)\n"
#~ "     --show[=<columns>]   display summary in definable table\n"
#~ "     --noheadings         don't print headings, use with --show\n"
#~ "     --raw                use the raw output format, use with --show\n"
#~ "     --bytes              display swap size in bytes in --show output\n"
#~ " -v, --verbose            verbose mode\n"
#~ msgstr ""
#~ "  -a, --all             alle wisselgebieden uit /etc/fstab inschakelen\n"
#~ "  -d, --discard         vrijgemaakte pagina's verwerpen vóór hergebruik\n"
#~ "  -e, --ifexists        niet-bestaande apparaten stilzwijgend overslaan\n"
#~ "  -f, --fixpgsz         wisselgebied herinitialiseren indien nodig\n"
#~ "  -p, --priority <pri>  te gebruiken prioriteit voor wisselgebied\n"
#~ "  -s, --summary         alleen samenvatting van gebruikte wisselgebieden tonen\n"
#~ "  -v, --verbose         gedetailleerde uitvoer produceren\n"

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [options] [file ...]\n"
#~ msgstr ""
#~ "\n"
#~ "Gebruik:  %s [opties] [<bestand>...]\n"

#~ msgid ""
#~ " -,  --no-underlining  suppress all underlining\n"
#~ " -2, --half-lines      print all half-lines\n"
#~ "\n"
#~ msgstr ""
#~ "  -,  --no-underlining  alle onderstrepingen onderdrukken\n"
#~ "  -2, --half-lines      alle halfregels weergeven\n"
#~ "\n"

#~ msgid "calling hexdump as od has been deprecated in favor of GNU coreutils od"
#~ msgstr ""
#~ "Het aanroepen van 'hexdump' als 'od' wordt ontraden;\n"
#~ "gebruik hiervoor in de plaats de 'od' van GNU coreutils."

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [option] file\n"
#~ msgstr ""
#~ "\n"
#~ "Gebruik:  %s [optie] <bestand>\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -n, --lines NUMBER  output the last NUMBER lines\n"
#~ " -NUMBER             same as `-n NUMBER'\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "Opties:\n"
#~ "  -n, --lines AANTAL  de laatste AANTAL regels weergeven\n"
#~ "  -AANTAL             hetzelfe als '--lines AANTAL'\n"
#~ "\n"

#~ msgid " %s [options] file\n"
#~ msgstr "  %s [opties] <bestand>\n"

#~ msgid "can only change local entries."
#~ msgstr "kan alleen lokale items wijzigen"

#~ msgid "     --time-format <format>  show time stamp using format:\n"
#~ msgstr "      --time-format <opmaak>  tijdsstempels tonen in gegeven opmaak:\n"

#~ msgid "                               [notime|short|full|iso]\n"
#~ msgstr "                                notime|short|full|iso\n"

#~ msgid "COMMAND not specified."
#~ msgstr "geen <opdracht> gegeven"

#~ msgid " %s [options] pathname [pathname ...]\n"
#~ msgstr "  %s [opties] <padnaam>...\n"

#~ msgid "no filename specified."
#~ msgstr "geen bestandsnaam gegeven"

#~ msgid "...back 1 page"
#~ msgstr "...1 pagina terug"

#~ msgid "...skipping one line"
#~ msgstr "...1 regel overslaand"

#~ msgid "waidpid failed"
#~ msgstr "waitpid() is mislukt"

#~ msgid " -x, --destination <dir>  extract into directory\n"
#~ msgstr "  -x, --destination <map>  extraheren naar deze map\n"

#~ msgid "compiled without -x support"
#~ msgstr "gecompileerd zonder ondersteuning voor '-x'"

#~ msgid "%s: Out of memory!\n"
#~ msgstr "%s: Onvoldoende geheugen beschikbaar!\n"

#~ msgid "Unusable"
#~ msgstr "[onbruikbaar]"

#~ msgid "write failed\n"
#~ msgstr "schrijven is mislukt\n"

#~ msgid "Disk has been changed.\n"
#~ msgstr "De schijf is veranderd.\n"

#~ msgid "Reboot the system to ensure the partition table is correctly updated.\n"
#~ msgstr "Herstart het systeem om er zeker van te zijn dat de juiste partitietabel wordt gezien.\n"

#~ msgid ""
#~ "\n"
#~ "WARNING: If you have created or modified any\n"
#~ "DOS 6.x partitions, please see the cfdisk manual\n"
#~ "page for additional information.\n"
#~ msgstr ""
#~ "\n"
#~ "WAARSCHUWING: Als u DOS-6.x-partities gemaakt of gewijzigd hebt,\n"
#~ "raadpleeg dan het cfdisk-handboek voor meer informatie.\n"

#~ msgid "FATAL ERROR"
#~ msgstr "FATALE FOUT"

#~ msgid "Press any key to exit cfdisk"
#~ msgstr "Druk op een toets om 'cfdisk' af te sluiten"

#~ msgid "Cannot seek on disk drive"
#~ msgstr "Kan geen 'seek' doen op schijf"

#~ msgid "Cannot read disk drive"
#~ msgstr "Kan schijf niet lezen"

#~ msgid "Cannot write disk drive"
#~ msgstr "Kan niet naar schijf schrijven"

#~ msgid "Too many partitions"
#~ msgstr "Te veel partities"

#~ msgid "Partition begins before sector 0"
#~ msgstr "Partitie begint vóór sector 0"

#~ msgid "Partition ends before sector 0"
#~ msgstr "Partitie eindigt vóór sector 0"

#~ msgid "Partition begins after end-of-disk"
#~ msgstr "Partitie begint na einde van schijf"

#~ msgid "Partition ends after end-of-disk"
#~ msgstr "Partitie eindigt na einde van schijf"

#~ msgid "logical partitions not in disk order"
#~ msgstr "logische partities liggen niet in schijfvolgorde"

#~ msgid "logical partitions overlap"
#~ msgstr "logische partities overlappen"

#~ msgid "enlarged logical partitions overlap"
#~ msgstr "vergrote logische partities overlappen"

#~ msgid "!!!! Internal error creating logical drive with no extended partition !!!!"
#~ msgstr "**Interne programmafout** bij het maken van logische schijf zonder uitgebreide partitie"

#~ msgid "Cannot create logical drive here -- would create two extended partitions"
#~ msgstr "Kan hier geen logische schijf maken -- zou twee uitgebreide partities maken"

#~ msgid "Menu item too long. Menu may look odd."
#~ msgstr "Menu-item is te lang.  Menu ziet er misschien raar uit."

#~ msgid "Illegal key"
#~ msgstr "Ongeldige toets"

#~ msgid "Create a new primary partition"
#~ msgstr "P = een nieuwe primaire partitie maken"

#~ msgid "Create a new logical partition"
#~ msgstr "L = een nieuwe logische partitie maken"

#~ msgid "Cancel"
#~ msgstr "annuleren"

#~ msgid "Don't create a partition"
#~ msgstr "Esc,Esc = Geen partitie maken"

#~ msgid "!!! Internal error !!!"
#~ msgstr "**Interne programmafout**"

#~ msgid "Size (in MB): "
#~ msgstr "Grootte (in MB): "

#~ msgid "Beginning"
#~ msgstr "Begin"

#~ msgid "Add partition at beginning of free space"
#~ msgstr "B = partitie toevoegen aan begin van vrije ruimte"

#~ msgid "Add partition at end of free space"
#~ msgstr "E = Partitie toevoegen aan einde van vrije ruimte"

#~ msgid "No room to create the extended partition"
#~ msgstr "Er is geen ruimte om de uitgebreide partitie te maken"

#~ msgid "No partition table. Starting with zero table."
#~ msgstr "Geen partitietabel aanwezig.  Gestart met een lege tabel."

#~ msgid "Bad signature on partition table"
#~ msgstr "Onjuiste vingerafdruk in partitietabel"

#~ msgid "Unknown partition table type"
#~ msgstr "Onbekend partitietabeltype"

#~ msgid "Do you wish to start with a zero table [y/N] ?"
#~ msgstr "Wilt u met een lege tabel beginnen? [j/N]"

#~ msgid "Cannot open disk drive"
#~ msgstr "Kan schijf niet openen"

#~ msgid "Opened disk read-only - you have no permission to write"
#~ msgstr "Schijf is als alleen-lezen geopend -- u hebt geen toegangsrechten om te schrijven"

#~ msgid "Cannot get disk size"
#~ msgstr "Kan schijfgrootte niet achterhalen"

#~ msgid "Bad primary partition"
#~ msgstr "Ongeldige primaire partitie"

#~ msgid "Warning!!  This may destroy data on your disk!"
#~ msgstr "Waarschuwing!!  Dit kan gegevens op uw schijf wissen!"

#~ msgid "Please enter `yes' or `no'"
#~ msgstr "Antwoord met 'ja' of 'nee'."

#~ msgid "Writing partition table to disk..."
#~ msgstr "Schrijven van partitietabel naar schijf..."

#~ msgid "Wrote partition table to disk"
#~ msgstr "De partitietabel is naar schijf geschreven."

#~ msgid "Wrote partition table, but re-read table failed.  Run partprobe(8), kpartx(8) or reboot to update table."
#~ msgstr ""
#~ "Partitietabel is geschreven, maar opnieuw inlezen is mislukt.\n"
#~ "Draai partprobe(8) of kpartx(8), of herstart uw systeem om de\n"
#~ "juiste tabel te gebruiken."

#~ msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
#~ msgstr "Er is geen primaire partitie als opstartbaar gemarkeerd.  DOS MBR kan dit niet opstarten."

#~ msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this."
#~ msgstr "Meer dan één primaire partitie is als opstartbaar gemarkeerd.  DOS MBR kan dit niet opstarten."

#~ msgid "Enter filename or press RETURN to display on screen: "
#~ msgstr "Geef een bestandsnaam op, of druk op Enter voor weergave op het scherm: "

#~ msgid "Disk Drive: %s\n"
#~ msgstr "Schijf: %s\n"

#~ msgid "Sector 0:\n"
#~ msgstr "Sector 0:\n"

#~ msgid "Sector %d:\n"
#~ msgstr "Sector %d:\n"

#~ msgid "   None   "
#~ msgstr "   [geen] "

#~ msgid "   Pri/Log"
#~ msgstr "   pri/log"

#~ msgid "   Primary"
#~ msgstr "   primair"

#~ msgid "   Logical"
#~ msgstr "   logisch"

#~ msgid "(%02X)"
#~ msgstr "(%02X)"

#~ msgid "None"
#~ msgstr "geen"

#~ msgid "Partition Table for %s\n"
#~ msgstr "Partitietabel van %s:\n"

#~ msgid "               First       Last\n"
#~ msgstr "                Eerste     Laatste\n"

#~ msgid " # Type       Sector      Sector   Offset    Length   Filesystem Type (ID) Flag\n"
#~ msgstr " # Type         sector      sector Plaats      Lengte Bestandssysteem (ID) Vlag\n"

#~ msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
#~ msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"

#~ msgid "         ---Starting----      ----Ending-----    Start     Number of\n"
#~ msgstr "          ----Begin-----       ----Einde-----                  Aantal\n"

#~ msgid " # Flags Head Sect  Cyl   ID  Head Sect  Cyl     Sector    Sectors\n"
#~ msgstr " #  Vlag  Kop  Sec   Cil   ID  Kop  Sec   Cil Startsector    sectoren\n"

#~ msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
#~ msgstr "--  ----  ---  ---  ---- ----  ---  --- ----- ----------- -----------\n"

#~ msgid "Raw"
#~ msgstr "Ruw"

#~ msgid "Print the table using raw data format"
#~ msgstr "R = de tabel in ruwe-gegevensindeling weergeven"

#~ msgid "Print the table ordered by sectors"
#~ msgstr "S = de tabel geordend op sectoren weergeven"

#~ msgid "Table"
#~ msgstr "Tabel"

#~ msgid "Just print the partition table"
#~ msgstr "T = gewoon de partitietabel weergeven"

#~ msgid "Don't print the table"
#~ msgstr "Esc,Esc = tabel niet weergeven"

#~ msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
#~ msgstr "Copyright (C) 1994-1999 Kevin E. Martin & aeb"

#~ msgid "  g          Change cylinders, heads, sectors-per-track parameters"
#~ msgstr "    g      cilinders, koppen, sectoren-per-spoor wijzigen;"

#~ msgid "             WARNING: This option should only be used by people who"
#~ msgstr "             *waarschuwing*: deze optie dient alleen te worden gebruikt"

#~ msgid "             know what they are doing."
#~ msgstr "             door mensen die echt weten wat ze doen"

#~ msgid "  m          Maximize disk usage of the current partition"
#~ msgstr "    m      schijfgebruik van de huidige partitie maximaliseren;"

#~ msgid "             Note: This may make the partition incompatible with"
#~ msgstr "             dit kan een partitie incompatibel maken met DOS, OS/2, ..."

#~ msgid "  p          Print partition table to the screen or to a file"
#~ msgstr "    p      partitietabel weergeven op scherm of naar bestand;"

#~ msgid "             There are several different formats for the partition"
#~ msgstr "             er zijn verschillende opmaken waaruit u kunt kiezen:"

#~ msgid "                r - Raw data (exactly what would be written to disk)"
#~ msgstr "             r - ruwe gegevens (exact wat naar schijf zou worden geschreven)"

#~ msgid "                s - Table ordered by sectors"
#~ msgstr "             s - tabel geordend op sectoren"

#~ msgid "                t - Table in raw format"
#~ msgstr "             t - tabel in ruwe opmaak"

#~ msgid "  u          Change units of the partition size display"
#~ msgstr "    u      gebruikte eenheid voor partitiegrootte wijzigen"

#~ msgid "             Rotates through MB, sectors and cylinders"
#~ msgstr "             (roteert door MB, sectoren en cilinders)"

#~ msgid "CTRL-L       Redraws the screen"
#~ msgstr "  Ctrl-L   het scherm opnieuw tekenen"

#~ msgid "  ?          Print this screen"
#~ msgstr "    ?      dit hulpscherm tonen"

#~ msgid "Change cylinder geometry"
#~ msgstr "Cilindergeometrie wijzigen"

#~ msgid "Change head geometry"
#~ msgstr "Koppengeometrie wijzigen"

#~ msgid "Change sector geometry"
#~ msgstr "Sectorgeometrie wijzigen"

#~ msgid "Done with changing geometry"
#~ msgstr "Klaar met wijzigen van geometrie"

#~ msgid "Enter the number of cylinders: "
#~ msgstr "Geef het aantal cilinders: "

#~ msgid "Illegal cylinders value"
#~ msgstr "Onjuiste waarde voor cilinders"

#~ msgid "Enter the number of heads: "
#~ msgstr "Geef het aantal koppen: "

#~ msgid "Illegal heads value"
#~ msgstr "Onjuiste waarde voor koppen"

#~ msgid "Enter the number of sectors per track: "
#~ msgstr "Geef het aantal sectoren per spoor: "

#~ msgid "Illegal sectors value"
#~ msgstr "Onjuiste waarde voor sectoren"

#~ msgid "Enter filesystem type: "
#~ msgstr "Geef het soort bestandssysteem: "

#~ msgid "Cannot change FS Type to empty"
#~ msgstr "Kan bestandssysteemsoort niet naar 'leeg' veranderen"

#~ msgid "Cannot change FS Type to extended"
#~ msgstr "Kan bestandssysteemsoort niet naar 'uitgebreid' veranderen"

#~ msgid "Unk(%02X)"
#~ msgstr "??(%02X)"

#~ msgid "Pri/Log"
#~ msgstr "pri/log"

#~ msgid "Unknown (%02X)"
#~ msgstr "onbekend (%02X)"

#~ msgid "Disk Drive: %s"
#~ msgstr "Schijf: %s"

#~ msgid "Size: %lld bytes, %lld MB"
#~ msgstr "Grootte: %lld bytes, %lld MB"

#~ msgid "Size: %lld bytes, %lld.%lld GB"
#~ msgstr "Grootte: %lld bytes, %lld.%lld GB"

#~ msgid "Heads: %d   Sectors per Track: %d   Cylinders: %lld"
#~ msgstr "Koppen: %d   Sectoren per spoor: %d   Cilinders: %lld"

#~ msgid "Part Type"
#~ msgstr "Part.type"

#~ msgid "FS Type"
#~ msgstr "Bestandssysteem"

#~ msgid "[Label]"
#~ msgstr "[Label]"

#~ msgid "    Sectors"
#~ msgstr "   Sectoren"

#~ msgid "  Cylinders"
#~ msgstr "  Cilinders"

#~ msgid "  Size (MB)"
#~ msgstr "Grootte (MB)"

#~ msgid "  Size (GB)"
#~ msgstr "Grootte (GB)"

#~ msgid "No more partitions"
#~ msgstr "Er zijn geen verdere partities"

#~ msgid "Change disk geometry (experts only)"
#~ msgstr "G = schijfgeometrie wijzigen (alleen voor experts)"

#~ msgid "Maximize"
#~ msgstr "Maximeren"

#~ msgid "Maximize disk usage of the current partition (experts only)"
#~ msgstr "M = schijfgebruik maximaliseren voor huidige partitie (alleen voor experts)"

#~ msgid "Print"
#~ msgstr "P:tonen"

#~ msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
#~ msgstr "T = bestandssysteemsoort wijzigen (DOS, Linux, OS/2, ...)"

#~ msgid "Units"
#~ msgstr "U:eenheid"

#~ msgid "Change units of the partition size display (MB, sect, cyl)"
#~ msgstr "U = weergave-eenheid wijzigen (MB, sectoren, cilinders)"

#~ msgid "Cannot make this partition bootable"
#~ msgstr "Kan deze partitie niet opstartbaar maken"

#~ msgid "Cannot delete an empty partition"
#~ msgstr "Kan een lege partitie niet verwijderen"

#~ msgid "Cannot maximize this partition"
#~ msgstr "Kan deze partitie niet maximaliseren"

#~ msgid "This partition is unusable"
#~ msgstr "Deze partitie is onbruikbaar"

#~ msgid "This partition is already in use"
#~ msgstr "Deze partitie is al in gebruik"

#~ msgid "Cannot change the type of an empty partition"
#~ msgstr "Kan het type van een lege partitie niet wijzigen"

#~ msgid "Illegal command"
#~ msgstr "Onjuiste opdracht"

#~ msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
#~ msgstr "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"

#~ msgid " -h, --heads <number>      set the number of heads to use\n"
#~ msgstr "  -h, --heads <getal>       het aantal te gebruiken koppen\n"

#~ msgid " -g, --guess               guess a geometry from partition table\n"
#~ msgstr "  -g, --guess               een geometrie gokken op basis van partitietabel\n"

#~ msgid " -P, --print <r|s|t>       print partition table in specified format\n"
#~ msgstr "  -P, --print {r|s|t}       partitietabel tonen in aangegeven opmaak\n"

#~ msgid " -a, --arrow               use arrow for highlighting the current partition\n"
#~ msgstr "  -a, --arrow               een pijl gebruiken om huidige partitie aan te geven\n"

#~ msgid "cannot parse number of cylinders"
#~ msgstr "kan aantal cilinders niet ontleden"

#~ msgid "cannot parse number of heads"
#~ msgstr "kan aantal koppen niet ontleden"

#~ msgid "cannot parse number of sectors"
#~ msgstr "kan aantal sectoren niet ontleden"

#~ msgid ": "
#~ msgstr ": "

#~ msgid " -b <size>         sector size (512, 1024, 2048 or 4096)\n"
#~ msgstr "  -b <grootte>      te gebruiken sectorgrootte (512, 1024, 2048, of 4096)\n"

#~ msgid "\n"
#~ msgstr "\n"

#~ msgid "#"
#~ msgstr "#"

#~ msgid "Partition %d is already defined.  Delete it before re-adding it."
#~ msgstr ""
#~ "Partitie %d is al gedefinieerd.  Verwijder deze eerst,\n"
#~ "en voeg hem dan opnieuw toe."

#~ msgid ""
#~ "Partition type:\n"
#~ "   p   primary (%zd primary, %d extended, %zd free)\n"
#~ "%s\n"
#~ "Select (default %c)"
#~ msgstr ""
#~ "Partitietype:\n"
#~ "   p   primair (%zd primair, %d uitgebreid, %zd vrij)\n"
#~ "%s\n"
#~ "Kies (standaard is %c)"

#~ msgid "   e   extended"
#~ msgstr "   e   uitgebreide partitie"

#~ msgid "Nr"
#~ msgstr "Nr"

#~ msgid "Hd"
#~ msgstr "Kp"

#~ msgid "Sec"
#~ msgstr "Sec"

#~ msgid "Cyl"
#~ msgstr "Cil"

#~ msgid "This doesn't look like a partition table. Probably you selected the wrong device."
#~ msgstr ""
#~ "Dit lijkt niet op een partitietabel.\n"
#~ "Waarschijnlijk koos u een verkeerd apparaat."

#~ msgid "Blocks "
#~ msgstr "Blokken "

#~ msgid "System"
#~ msgstr "Systeem"

#~ msgid "Partition %zd is already defined. Delete it before re-adding it."
#~ msgstr ""
#~ "Partitie %zd is al gedefinieerd.  Verwijder deze eerst,\n"
#~ "en voeg hem dan opnieuw toe."

#~ msgid "Info"
#~ msgstr "Info"

#~ msgid "Sector"
#~ msgstr "Sector"

#~ msgid "You will get a partition overlap on the disk. Fix it first!"
#~ msgstr "U zult een partitie-overlap krijgen op de schijf.  Los dit eerst op!"

#~ msgid "Warning:  BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu. This value may be truncated for devices > 33.8 GB."
#~ msgstr ""
#~ "Waarschuwing: ioctl(BLKGETSIZE) is mislukt op %s.\n"
#~ "Cilindergeometriewaarde %llu wordt nu gebruikt.\n"
#~ "Deze waarde kan voor apparaten groter dan 33.8 GB afgekapt zijn."

#~ msgid "Flag"
#~ msgstr "Vlag"

#~ msgid ""
#~ " %1$s [options] LABEL=<label>\n"
#~ " %1$s [options] UUID=<uuid>\n"
#~ msgstr ""
#~ "  %1$s [opties] LABEL=<label>\n"
#~ "  %1$s [opties] UUID=<uuid>\n"

#~ msgid ""
#~ " -f, --file <file> use file as a cookie seed\n"
#~ " -v, --verbose     explain what is being done\n"
#~ "\n"
#~ msgstr ""
#~ "  -f, --file=BESTAND  dit bestand als cookie-seed gebruiken\n"
#~ "  -v, --verbose       vermelden wat er gedaan wordt\n"
#~ "\n"

#~ msgid "Both --pid and --no-pid specified. Ignoring --no-pid."
#~ msgstr "Zowel '--pid' als '--no-pid' is gegeven; '--no-pid' wordt genegeerd."

#~ msgid "warning: error reading %s: %s"
#~ msgstr "waarschuwing: fout bij lezen van %s: %s"

#~ msgid "warning: can't open %s: %s"
#~ msgstr "waarschuwing: kan %s niet openen: %s"

#~ msgid "mount: could not open %s - using %s instead\n"
#~ msgstr "mount: kan %s niet openen -- %s wordt gebruikt\n"

#~ msgid "can't create lock file %s: %s (use -n flag to override)"
#~ msgstr "kan vergrendelingsbestand %s niet aanmaken: %s  (gebruik optie '-n' om te forceren)"

#~ msgid "can't link lock file %s: %s (use -n flag to override)"
#~ msgstr "kan vergrendelingsbestand %s niet koppelen: %s  (gebruik optie '-n' om te forceren)"

#~ msgid "can't open lock file %s: %s (use -n flag to override)"
#~ msgstr "kan vergrendelingsbestand %s niet openen: %s  (gebruik optie '-n' om te forceren)"

#~ msgid "Can't lock lock file %s: %s\n"
#~ msgstr "kan vergrendelingsbestand %s niet vergrendelen: %s\n"

#~ msgid "can't lock lock file %s: %s"
#~ msgstr "kan vergrendelingsbestand %s niet vergrendelen: %s"

#~ msgid ""
#~ "Cannot create link %s\n"
#~ "Perhaps there is a stale lock file?\n"
#~ msgstr ""
#~ "Kan koppeling %s niet maken.\n"
#~ "Mogelijk is er nog een oud vergrendelingsbestand?\n"

#~ msgid "cannot open %s (%s) - mtab not updated"
#~ msgstr "kan %s niet openen (%s) -- mtab is niet bijgewerkt"

#~ msgid "error writing %s: %s"
#~ msgstr "fout bij schrijven van %s: %s"

#~ msgid "%s: cannot fflush changes: %s"
#~ msgstr "%s: kan wijzigingen niet wegschrijven: %s"

#~ msgid "error changing mode of %s: %s\n"
#~ msgstr "fout bij wijzigen van modus van %s: %s\n"

#~ msgid "error changing owner of %s: %s\n"
#~ msgstr "fout bij wijzigen van eigenaar van %s: %s\n"

#~ msgid "can't rename %s to %s: %s\n"
#~ msgstr "kan %s niet hernoemen tot %s: %s\n"

#~ msgid ""
#~ "\n"
#~ "mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
#~ "       It's possible that information reported by mount(8) is not\n"
#~ "       up to date. For actual information about system mount points\n"
#~ "       check the /proc/mounts file.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "mount: Waarschuwing: /etc/mtab is niet schrijfbaar (mogelijk wegens een\n"
#~ "       alleen-lezen bestandssysteem).  Het kan dus zijn dat de informatie\n"
#~ "       gerapporteerd door mount(8) niet correct is.  Zie voor actuele\n"
#~ "       info over aankoppelingspunten het bestand '/proc/mounts'.\n"
#~ "\n"

#~ msgid "mount: improperly quoted option string '%s'"
#~ msgstr "mount: onjuist aangehaalde tekenreeks '%s'"

#~ msgid "mount: translated %s '%s' to '%s'\n"
#~ msgstr "mount: argument van %s is vertaald van '%s' naar '%s'\n"

#~ msgid "mount: SELinux *context= options are ignore on remount.\n"
#~ msgstr "mount: SELinux-opties '*context=' worden genegeerd bij heraankoppelen.\n"

#~ msgid "mount: according to mtab, %s is already mounted on %s"
#~ msgstr "mount: volgens 'mtab' is %s al aangekoppeld op %s"

#~ msgid "mount: according to mtab, %s is mounted on %s"
#~ msgstr "mount: volgens 'mtab' is %s aangekoppeld op %s"

#~ msgid "mount: can't open %s for writing: %s"
#~ msgstr "mount: kan %s niet openen om te schrijven: %s"

#~ msgid "mount: error writing %s: %s"
#~ msgstr "mount: fout bij schrijven van %s: %s"

#~ msgid "mount: error changing mode of %s: %s"
#~ msgstr "mount: fout bij wijzigen van modus van %s: %s"

#~ msgid "mount: cannot set group id: %m"
#~ msgstr "mount: kan groeps-ID niet instellen: %m"

#~ msgid "mount: cannot set user id: %m"
#~ msgstr "mount: kan gebruikers-ID niet instellen: %m"

#~ msgid "mount: cannot fork: %s"
#~ msgstr "mount: kan geen nieuw proces starten: %s"

#~ msgid "Trying %s\n"
#~ msgstr "soort %s wordt geprobeerd\n"

#~ msgid "mount: you didn't specify a filesystem type for %s\n"
#~ msgstr "mount: U gaf geen bestandssysteemsoort aan voor %s;\n"

#~ msgid "       I will try all types mentioned in %s or %s\n"
#~ msgstr "       alle soorten genoemd in %s of %s worden geprobeerd\n"

#~ msgid "       and it looks like this is swapspace\n"
#~ msgstr "       het lijkt erop dat dit wisselgeheugen is\n"

#~ msgid "       I will try type %s\n"
#~ msgstr "       soort %s wordt geprobeerd\n"

#~ msgid "%s looks like swapspace - not mounted"
#~ msgstr "%s ziet er uit als wisselgeheugen -- niet aangekoppeld"

#~ msgid ""
#~ "mount: %s: more filesystems detected. This should not happen,\n"
#~ "       use -t <type> to explicitly specify the filesystem type or\n"
#~ "       use wipefs(8) to clean up the device.\n"
#~ msgstr ""
#~ "mount: %s: er zijn meerdere bestandssystemen gedetecteerd.\n"
#~ "    Dit zou niet mogen gebeuren.  Gebruik '-t SOORT' om expliciet de\n"
#~ "    bestandssysteemsoort aan te geven, of gebruik wipefs(8) om het\n"
#~ "    apparaat op te schonen.\n"

#~ msgid "mount: only root can mount %s on %s"
#~ msgstr "mount: alleen root kan %s aankoppelen op %s"

#~ msgid "mount: loop device specified twice"
#~ msgstr "mount: lus-apparaat is twee keer aangegeven"

#~ msgid "mount: type specified twice"
#~ msgstr "mount: soort is twee keer aangegeven"

#~ msgid "mount: skipping the setup of a loop device\n"
#~ msgstr "mount: instellen van lus-apparaat wordt overgeslagen\n"

#~ msgid "mount: enabling autoclear loopdev flag\n"
#~ msgstr "mount: lus-apparaatvlag 'autoclear' wordt ingeschakeld\n"

#~ msgid "mount: invalid offset '%s' specified"
#~ msgstr "mount: ongeldige positie '%s' opgegeven"

#~ msgid "mount: invalid sizelimit '%s' specified"
#~ msgstr "mount: ongeldige groottegrens '%s' opgegeven"

#~ msgid "mount: according to mtab %s is already mounted on %s as loop"
#~ msgstr "mount: volgens 'mtab' is %s al als lus-apparaat aangekoppeld op %s"

#~ msgid "encryption not supported, use cryptsetup(8) instead"
#~ msgstr "versleuteling wordt niet ondersteund; gebruik cryptsetup(8)"

#~ msgid "mount: failed to initialize loopdev context"
#~ msgstr "mount: initialiseren van lus-apparaat-context is mislukt"

#~ msgid "mount: failed to use %s device"
#~ msgstr "mount: gebruiken van apparaat %s is mislukt"

#~ msgid "mount: failed to found free loop device"
#~ msgstr "mount: kan geen vrij lus-apparaat vinden"

#~ msgid "mount: going to use the loop device %s\n"
#~ msgstr "mount: lus-apparaat %s zal worden gebruikt\n"

#~ msgid "mount: %s: failed to set loopdev attributes"
#~ msgstr "mount: %s: instellen van eigenschappen van lus-apparaat is mislukt"

#~ msgid "mount: %s: failed setting up loop device: %m"
#~ msgstr "mount: %s: instellen van lus-apparaat is mislukt: %m"

#~ msgid "mount: stolen loop=%s ...trying again\n"
#~ msgstr "mount: lus-apparaat %s is door ander proces afgepakt; ... nieuwe poging\n"

#~ msgid "mount: stolen loop=%s"
#~ msgstr "mount: lus-apparaat %s is door ander proces afgepakt"

#~ msgid "mount: setup loop device successfully\n"
#~ msgstr "mount: lus-apparaat is met succes ingesteld\n"

#~ msgid "mount: no %s found - creating it..\n"
#~ msgstr "mount: geen %s gevonden -- wordt nu aangemaakt...\n"

#~ msgid "mount: cannot open %s for setting speed"
#~ msgstr "mount: kan %s niet openen om snelheid in te stellen"

#~ msgid "mount: cannot set speed: %m"
#~ msgstr "mount: kan snelheid niet instellen: %m"

#~ msgid "mount: according to mtab, %s is already mounted on %s\n"
#~ msgstr "mount: volgens 'mtab' is %s al aangekoppeld op %s\n"

#~ msgid "mount: warning: %s seems to be mounted read-write.\n"
#~ msgstr "mount: Waarschuwing: %s schijnt aangekoppeld als lezen-en-schrijven\n"

#~ msgid "mount: warning: %s seems to be mounted read-only.\n"
#~ msgstr "mount: Waarschuwing: %s schijnt aangekoppeld als alleen-lezen\n"

#~ msgid "mount: I could not determine the filesystem type, and none was specified"
#~ msgstr "mount: kan bestandssysteemsoort niet bepalen, en er is geen aangegeven"

#~ msgid "mount: you must specify the filesystem type"
#~ msgstr "mount: u moet een bestandssysteemsoort aangeven"

#~ msgid "mount: mount failed"
#~ msgstr "mount: aankoppelen is mislukt"

#~ msgid "mount: mount point %s is not a directory"
#~ msgstr "mount: aankoppelingspunt %s is geen map"

#~ msgid "mount: permission denied"
#~ msgstr "mount: toegang geweigerd"

#~ msgid "mount: must be superuser to use mount"
#~ msgstr "mount: u moet root zijn om aan te kunnen koppelen"

#~ msgid "mount: proc already mounted"
#~ msgstr "mount: proc is al aangekoppeld"

#~ msgid "mount: %s already mounted or %s busy"
#~ msgstr "mount: %s is al aangekoppeld of %s is bezig"

#~ msgid "mount: mount point %s does not exist"
#~ msgstr "mount: aankoppelingspunt %s bestaat niet"

#~ msgid "mount: mount point %s is a symbolic link to nowhere"
#~ msgstr "mount: aankoppelingspunt %s is een symbolische koppeling die nergens naar wijst"

#~ msgid "mount: special device %s does not exist"
#~ msgstr "mount: apparaat %s bestaat niet"

#~ msgid ""
#~ "mount: special device %s does not exist\n"
#~ "       (a path prefix is not a directory)\n"
#~ msgstr "mount: apparaat %s bestaat niet  (het pad bevat iets dat geen map is)\n"

#~ msgid ""
#~ "mount: wrong fs type, bad option, bad superblock on %s,\n"
#~ "       missing codepage or helper program, or other error"
#~ msgstr ""
#~ "mount: onjuiste bestandssysteemsoort, ongeldige optie, ontbrekende codepagina,\n"
#~ "       ontbrekend hulpprogramma, slecht superblok op %s, of een andere fout"

#~ msgid ""
#~ "       (could this be the IDE device where you in fact use\n"
#~ "       ide-scsi so that sr0 or sda or so is needed?)"
#~ msgstr ""
#~ "       (is dit misschien een IDE-apparaat waar u in feite ide-scsi gebruikt,\n"
#~ "       zodat sr0 of sda of iets dergelijks nodig is?)"

#~ msgid ""
#~ "       (aren't you trying to mount an extended partition,\n"
#~ "       instead of some logical partition inside?)"
#~ msgstr ""
#~ "       (probeert u misschien een uitgebreide partitie aan te koppelen,\n"
#~ "       in plaats van een daarin opgenomen logische partitie?)"

#~ msgid ""
#~ "       In some cases useful info is found in syslog - try\n"
#~ "       dmesg | tail  or so\n"
#~ msgstr ""
#~ "       Soms staat er nuttige informatie in het systeemlog --\n"
#~ "       probeer zoiets als:  dmesg | tail\n"

#~ msgid "mount: %s: can't read superblock"
#~ msgstr "mount: %s: kan superblok niet lezen"

#~ msgid "mount: %s: unknown device"
#~ msgstr "mount: %s: onbekend apparaat"

#~ msgid "mount: unknown filesystem type '%s'"
#~ msgstr "mount: onbekende bestandssysteemsoort '%s'"

#~ msgid "mount: probably you meant %s"
#~ msgstr "mount: waarschijnlijk bedoelde u %s"

#~ msgid "mount: maybe you meant 'iso9660'?"
#~ msgstr "mount: mogelijk bedoelde u 'iso9660'?"

#~ msgid "mount: maybe you meant 'vfat'?"
#~ msgstr "mount: mogelijk bedoelde u 'vfat'?"

#~ msgid "mount: %s has wrong device number or fs type %s not supported"
#~ msgstr "mount: %s heeft onjuist apparaatnummer, of bestandssysteemsoort %s wordt niet ondersteund"

#~ msgid "mount: %s is not a block device, and stat fails?"
#~ msgstr "mount: %s is geen blok-apparaat, en stat() is mislukt... heel vreemd"

#~ msgid ""
#~ "mount: the kernel does not recognize %s as a block device\n"
#~ "       (maybe `modprobe driver'?)"
#~ msgstr ""
#~ "mount: de kernel herkent %s niet als een blok-apparaat\n"
#~ "       (misschien is 'modprobe stuurprogramma' nodig?)"

#~ msgid "mount: %s is not a block device (maybe try `-o loop'?)"
#~ msgstr "mount: %s is geen blok-apparaat  (misschien '-o loop' proberen?)"

#~ msgid "mount: %s is not a block device"
#~ msgstr "mount: %s is geen blok-apparaat"

#~ msgid "mount: %s is not a valid block device"
#~ msgstr "mount: %s is geen geldig blok-apparaat"

#~ msgid "block device "
#~ msgstr "blok-apparaat "

#~ msgid "mount: cannot mount %s%s read-only"
#~ msgstr "mount: kan %s%s niet aankoppelen voor alleen-lezen"

#~ msgid "mount: %s%s is write-protected but explicit `-w' flag given"
#~ msgstr "mount: %s%s is schrijfbeveiligd, maar expliciete optie '-w' is gegeven"

#~ msgid "mount: cannot remount %s%s read-write, is write-protected"
#~ msgstr "mount: kan %s%s niet heraankoppelen als lezen-en-schrijven, want is schrijfbeveiligd"

#~ msgid "mount: %s%s is write-protected, mounting read-only"
#~ msgstr "mount: %s%s is schrijfbeveiligd en wordt als alleen-lezen aangekoppeld"

#~ msgid "mount: no medium found on %s"
#~ msgstr "mount: geen medium gevonden op %s"

#~ msgid "mount: no type was given - I'll assume nfs because of the colon\n"
#~ msgstr "mount: geen soort gegeven -- NFS aangenomen, vanwege de dubbele punt\n"

#~ msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
#~ msgstr "mount: geen soort gegeven -- CIFS aangenomen, vanwege het //-voorvoegsel\n"

#~ msgid "mount: ignore %s (unparsable offset= option)\n"
#~ msgstr "mount: %s wordt genegeerd (onbegrepen optie 'offset=')\n"

#~ msgid ""
#~ "Usage: mount -V                 : print version\n"
#~ "       mount -h                 : print this help\n"
#~ "       mount                    : list mounted filesystems\n"
#~ "       mount -l                 : idem, including volume labels\n"
#~ "So far the informational part. Next the mounting.\n"
#~ "The command is `mount [-t fstype] something somewhere'.\n"
#~ "Details found in /etc/fstab may be omitted.\n"
#~ "       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab\n"
#~ "       mount device             : mount device at the known place\n"
#~ "       mount directory          : mount known device here\n"
#~ "       mount -t type dev dir    : ordinary mount command\n"
#~ "Note that one does not really mount a device, one mounts\n"
#~ "a filesystem (of the given type) found on the device.\n"
#~ "One can also mount an already visible directory tree elsewhere:\n"
#~ "       mount --bind olddir newdir\n"
#~ "or move a subtree:\n"
#~ "       mount --move olddir newdir\n"
#~ "One can change the type of mount containing the directory dir:\n"
#~ "       mount --make-shared dir\n"
#~ "       mount --make-slave dir\n"
#~ "       mount --make-private dir\n"
#~ "       mount --make-unbindable dir\n"
#~ "One can change the type of all the mounts in a mount subtree\n"
#~ "containing the directory dir:\n"
#~ "       mount --make-rshared dir\n"
#~ "       mount --make-rslave dir\n"
#~ "       mount --make-rprivate dir\n"
#~ "       mount --make-runbindable dir\n"
#~ "A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
#~ "or by label, using  -L label  or by uuid, using  -U uuid .\n"
#~ "Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
#~ "For many more details, say  man 8 mount .\n"
#~ msgstr ""
#~ "Gebruik:  mount                 : aangekoppelde bestandssystemen tonen\n"
#~ "          mount -l              : idem, inclusief volumenlabels\n"
#~ "\n"
#~ "Tot zover het deel dat informatie weergeeft.  Nu het aankoppelen.\n"
#~ "De algemene vorm is:  'mount [-t bestandssysteemsoort] iets ergens'.\n"
#~ "Details die in /etc/fstab staan kunnen worden weggelaten.\n"
#~ "          mount -a [-t|-O]      : alles in /etc/fstab aankoppelen\n"
#~ "          mount apparaat        : apparaat aankoppelen op de bekende plaats\n"
#~ "          mount map             : bekend apparaat hier aankoppelen\n"
#~ "          mount -t soort apparaat map : volledige mount-opdracht\n"
#~ "Merk op dat men niet echt een apparaat aankoppelt, maar het bestandssysteem\n"
#~ "(van de gegeven soort) dat zich op dat apparaat bevindt.\n"
#~ "\n"
#~ "Men kan ook een reeds zichtbare mappenboom ergens anders aankoppelen:\n"
#~ "          mount --bind oudemap nieuwemap\n"
#~ "of een subboom verplaatsen:\n"
#~ "          mount --move oudemap nieuwemap\n"
#~ "Men kan van een aankoppeling de soort veranderen, als 'map' erin voorkomt:\n"
#~ "       mount --make-shared map\n"
#~ "       mount --make-slave map\n"
#~ "       mount --make-private map\n"
#~ "       mount --make-unbindable map\n"
#~ "Men kan van alle aankoppelingen in een subboom de soort veranderen,\n"
#~ "als 'map' erin voorkomt:\n"
#~ "       mount --make-rshared map\n"
#~ "       mount --make-rslave map\n"
#~ "       mount --make-rprivate map\n"
#~ "       mount --make-runbindable map\n"
#~ "\n"
#~ "Een apparaat kan worden opgegeven via de naam, zeg /dev/hda1 of /dev/cdrom,\n"
#~ "of via het label, met -L label, of via de UUID, met -U UUID.\n"
#~ "Andere opties zijn: [-nfFrsvw] [-o opties] [-p wachtwoordbestandsdescriptor].\n"
#~ "Voor meer informatie, zie man mount(8).\n"

#~ msgid "--pass-fd is no longer supported"
#~ msgstr "optie '--pass-fd' wordt niet langer ondersteund"

#~ msgid "mount: only root can do that (effective UID is %u)"
#~ msgstr "mount: alleen root kan dat doen (feitelijke UID is %u)"

#~ msgid "mount: only root can do that"
#~ msgstr "mount: alleen root kan dat doen"

#~ msgid "nothing was mounted"
#~ msgstr "er werd niets aangekoppeld"

#~ msgid "mount: no such partition found"
#~ msgstr "mount: die partitie is niet gevonden"

#~ msgid "mount: can't find %s in %s or %s"
#~ msgstr "mount: kan %s niet vinden in %s noch in %s"

#~ msgid "[mntent]: warning: no final newline at the end of %s\n"
#~ msgstr "[mntent]: waarschuwing: geen afsluitend regeleindeteken aan het eind van %s\n"

#~ msgid "[mntent]: line %d in %s is bad%s\n"
#~ msgstr "[mntent]: regel %d in %s is ongeldig%s\n"

#~ msgid "; rest of file ignored"
#~ msgstr "; rest van bestand is genegeerd"

#~ msgid "not enough memory"
#~ msgstr "onvoldoende geheugen beschikbaar"

#~ msgid "umount: compiled without support for -f\n"
#~ msgstr "'umount' is gecompileerd zonder ondersteuning voor '-f'\n"

#~ msgid "umount: cannot set group id: %m"
#~ msgstr "umount: kan groeps-ID niet instellen: %m"

#~ msgid "umount: cannot set user id: %m"
#~ msgstr "umount: kan gebruikers-ID niet instellen: %m"

#~ msgid "umount: cannot fork: %s"
#~ msgstr "umount: kan geen nieuw proces starten: %s"

#~ msgid "umount: %s: invalid block device"
#~ msgstr "umount: %s: ongeldig blok-apparaat"

#~ msgid "umount: %s: not mounted"
#~ msgstr "umount: %s: niet aangekoppeld"

#~ msgid "umount: %s: can't write superblock"
#~ msgstr "umount: %s: kan niet naar superblok schrijven"

#~ msgid ""
#~ "umount: %s: device is busy.\n"
#~ "        (In some cases useful info about processes that use\n"
#~ "         the device is found by lsof(8) or fuser(1))"
#~ msgstr ""
#~ "umount: %s: apparaat is bezig\n"
#~ "        (Welke processen het apparaat gebruiken kan mogelijk\n"
#~ "         gevonden worden met behulp van lsof(8) of fuser(1).)"

#~ msgid "umount: %s: not found"
#~ msgstr "umount: %s: niet gevonden"

#~ msgid "umount: %s: must be superuser to umount"
#~ msgstr "umount: %s: u moet root zijn om af te kunnen koppelen"

#~ msgid "umount: %s: block devices not permitted on fs"
#~ msgstr "umount: %s: blok-apparaten niet toegestaan op bestandssysteem"

#~ msgid "umount: %s: %s"
#~ msgstr "umount: %s: %s"

#~ msgid "umount: internal error: invalid abs path: %s"
#~ msgstr "umount: *interne programmafout*: ongeldig absoluut pad: %s"

#~ msgid "umount: failed to chdir to %s: %m"
#~ msgstr "umount: naar map %s gaan is mislukt: %m"

#~ msgid "umount: failed to obtain current directory: %m"
#~ msgstr "umount: achterhalen van huidige map is mislukt: %m"

#~ msgid "umount: mountpoint moved (%s -> %s)"
#~ msgstr "umount: aankoppelingspunt is verplaatst (%s -> %s)"

#~ msgid "current directory moved to %s\n"
#~ msgstr "huidige map is verplaatst naar %s\n"

#~ msgid "no umount2, trying umount...\n"
#~ msgstr "geen umount2 aanwezig; poging met gewone umount...\n"

#~ msgid "umount: %s busy - remounted read-only\n"
#~ msgstr "umount: %s is bezig -- als alleen-lezen heraangekoppeld\n"

#~ msgid "umount: could not remount %s read-only\n"
#~ msgstr "umount: kan %s niet als alleen-lezen heraankoppelen\n"

#~ msgid "%s has been unmounted\n"
#~ msgstr "%s werd afgekoppeld\n"

#~ msgid "umount: cannot find list of filesystems to unmount"
#~ msgstr "umount: kan geen lijst vinden met bestandssystemen om af te koppelen"

#~ msgid ""
#~ "Usage: umount -h | -V\n"
#~ "       umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
#~ "       umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
#~ msgstr ""
#~ "Gebruik:  umount [-dfnrv] map|apparaat...\n"
#~ "          umount -a [-dfnrv] [-t bestandssysteemsoorten] [-O opties]\n"
#~ "          umount -h|-V\n"

#~ msgid "failed to parse 'offset=%s' options\n"
#~ msgstr "ontleden van opties 'offset=%s' is mislukt\n"

#~ msgid "device %s is associated with %s\n"
#~ msgstr "apparaat %s is gerelateerd aan %s\n"

#~ msgid "Cannot unmount \"\"\n"
#~ msgstr "Kan niet \"\" afkoppelen\n"

#~ msgid "umount: confused when analyzing mtab"
#~ msgstr "umount: verward tijdens analyse van 'mtab'-bestand"

#~ msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
#~ msgstr "umount: kan %s niet afkoppelen -- %s is er op hetzelfde punt overheen aangekoppeld"

#~ msgid "Could not find %s in mtab\n"
#~ msgstr "Kan %s niet vinden in mtab\n"

#~ msgid "umount: warning: %s is associated with more than one loop device\n"
#~ msgstr "umount: waarschuwing: %s is gerelateerd aan meer dan één lus-apparaat\n"

#~ msgid "umount: %s is not mounted (according to mtab)"
#~ msgstr "umount: %s is niet aangekoppeld (volgens mtab)"

#~ msgid "umount: it seems %s is mounted multiple times"
#~ msgstr "umount: het lijkt erop dat %s meerdere keren is aangekoppeld"

#~ msgid "umount: %s is not in the fstab (and you are not root)"
#~ msgstr "umount: %s staat niet in fstab (en u bent niet root)"

#~ msgid "umount: %s mount disagrees with the fstab"
#~ msgstr "umount: aankoppeling op %s komt niet overeen met fstab"

#~ msgid "umount: only %s can unmount %s from %s"
#~ msgstr "umount: alleen %s kan %s afkoppelen van %s"

#~ msgid "umount: only root can do that"
#~ msgstr "umount: alleen root kan dat doen"

#~ msgid " %s [options] <tty> [...]\n"
#~ msgstr "  %s [opties] <tty>...\n"

#~ msgid " -s, --set-threshold <num>          set interruption threshold value\n"
#~ msgstr "  -s, --set-threshold GETAL          onderbrekingsdrempelwaarde instellen\n"

#~ msgid " -S, --set-default-threshold <num>  set default threshold value\n"
#~ msgstr "  -S, --set-default-threshold GETAL  standaard drempelwaarde instellen\n"

#~ msgid " -t, --set-flush <num>              set flush timeout to value\n"
#~ msgstr "  -t, --set-flush GETAL              doorsluis-tijdslimiet instellen\n"

#~ msgid " -T, --set-default-flush <num>      set the default flush timeout to value\n"
#~ msgstr "  -T, --set-default-flush GETAL      standaard doorsluis-tijdslimiet instellen\n"

#~ msgid " -i, --interval <seconds>           gather statistics every <seconds> interval\n"
#~ msgstr "  -i, --interval AANTAL              statistieken elk AANTAL seconden verzamelen\n"

# Wat die "For" betekent: geen idee... -- Benno
#~ msgid ""
#~ "File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
#~ "and the maximum transfer rate in characters/second was %f"
#~ msgstr ""
#~ "Voor bestand %s, en met drempelwaarde %lu,\n"
#~ "was het maximum aantal tekens in de fifo %d,\n"
#~ "en de maximale overdrachtssnelheid %f tekens/seconde."

#~ msgid ""
#~ "File %s, For threshold value %lu and timeout value %lu, Maximum characters in fifo were %d,\n"
#~ "and the maximum transfer rate in characters/second was %f"
#~ msgstr ""
#~ "Voor bestand %s, en met drempelwaarde %lu en tijdslimiet %lu,\n"
#~ "was het maximum aantal tekens in de fifo %d,\n"
#~ "en de maximale overdrachtssnelheid %f tekens/seconde."

#~ msgid "cannot issue CYGETMON on %s"
#~ msgstr "kan ioctl(CYGETMON) niet uitvoeren op %s"

#~ msgid "cannot get threshold for %s"
#~ msgstr "kan drempelwaarde voor %s niet verkrijgen"

#~ msgid "cannot get timeout for %s"
#~ msgstr "kan tijdslimiet voor %s niet verkrijgen"

#~ msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
#~ msgstr ""
#~ "%s: %lu onderbrekingen, %lu/%lu tekens;\n"
#~ "fifo: %lu drempelwaarde, %lu tijdslimiet, %lu maximum, %lu nu\n"

#~ msgid "   %f int/sec; %f rec, %f send (char/sec)\n"
#~ msgstr "   %f onderbrekingen/sec; %f ontvangen, %f verzonden (tekens/sec)\n"

#~ msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
#~ msgstr ""
#~ "%s: %lu onderbrekingen, %lu tekens;\n"
#~ "fifo: %lu drempelwaarde, %lu tijdslimiet, %lu maximum, %lu nu\n"

#~ msgid "   %f int/sec; %f rec (char/sec)\n"
#~ msgstr "   %f onderbrekingen/sec; %f ontvangen (tekens/sec)\n"

#~ msgid "Invalid interval value"
#~ msgstr "Ongeldige intervalwaarde"

#~ msgid "Invalid interval value: %d"
#~ msgstr "Ongeldige intervalwaarde: %d"

#~ msgid "Invalid set value"
#~ msgstr "Ongeldige drempelwaarde"

#~ msgid "Invalid set value: %d"
#~ msgstr "Ongeldige drempelwaarde: %d"

#~ msgid "Invalid default value"
#~ msgstr "Ongeldige standaarddrempelwaarde"

#~ msgid "Invalid default value: %d"
#~ msgstr "Ongeldige standaarddrempelwaarde: %d"

#~ msgid "Invalid set time value"
#~ msgstr "Ongeldige waarde voor tijdslimiet"

#~ msgid "Invalid set time value: %d"
#~ msgstr "Ongeldige waarde voor tijdslimiet: %d"

#~ msgid "Invalid default time value"
#~ msgstr "Ongeldige standaardwaarde voor tijdslimiet"

#~ msgid "Invalid default time value: %d"
#~ msgstr "Ongeldige standaardwaarde voor tijdslimiet: %d"

#~ msgid "cannot set %s to threshold %d"
#~ msgstr "kan %s niet instellen op drempelwaarde %d"

#~ msgid "cannot set %s to time threshold %d"
#~ msgstr "kan %s niet instellen op tijdsdrempel %d"

#~ msgid "%s: %ld current threshold and %ld current timeout\n"
#~ msgstr "%s: %ld is huidige drempelwaarde en %ld is huidige tijdslimiet\n"

#~ msgid "%s: %ld default threshold and %ld default timeout\n"
#~ msgstr "%s: %ld is standaard drempelwaarde en %ld is standaard tijdslimiet\n"

#~ msgid ""
#~ " -n, --keep-size     don't modify the length of the file\n"
#~ " -p, --punch-hole    punch holes in the file\n"
#~ " -o, --offset <num>  offset of the allocation, in bytes\n"
#~ " -l, --length <num>  length of the allocation, in bytes\n"
#~ msgstr ""
#~ "  -n, --keep-size         lengte van bestand niet wijzigen\n"
#~ "  -p, --punch-hole        gaten in het bestand maken\n"
#~ "  -o, --offset <getal>    positie van de reservering, in bytes\n"
#~ "  -l, --length <getal>    lengte van de reservering, in bytes\n"

#~ msgid ""
#~ " -o, --offset <num>  offset in bytes to discard from\n"
#~ " -l, --length <num>  length of bytes to discard from the offset\n"
#~ " -m, --minimum <num> minimum extent length to discard\n"
#~ " -v, --verbose       print number of discarded bytes\n"
#~ msgstr ""
#~ " -o, --offset <getal>   bytepositie vanaf waar blokken verworpen moeten worden\n"
#~ " -l, --length <getal>   lengte (in bytes) van gebied waarin naar ongebruikte\n"
#~ "                          blokken gezocht moet worden\n"
#~ " -m, --minimum <getal>  minimumgrootte (in bytes) van een te verwerpen\n"
#~ "                          aaneengesloten groep ongebruikte blokken\n"
#~ " -v, --verbose          het aantal verworpen bytes tonen\n"

#~ msgid ""
#~ "Time elapsed since reference time has been %.6f seconds.\n"
#~ "Delaying further to reach the new time.\n"
#~ msgstr ""
#~ "Verlopen tijd sinds laatste referentietijd is %.6f seconden.\n"
#~ "Wordt verder uitgesteld om de nieuwe tijd te bereiken.\n"

#~ msgid " -term <terminal_name>\n"
#~ msgstr "  -term <terminalnaam>\n"

#~ msgid " -reset\n"
#~ msgstr "  -reset\n"

#~ msgid " -initialize\n"
#~ msgstr "  -initialize\n"

#~ msgid " -cursor <on|off>\n"
#~ msgstr "  -cursor on|off\n"

#~ msgid " -repeat <on|off>\n"
#~ msgstr "  -repeat on|off\n"

#~ msgid " -appcursorkeys <on|off>\n"
#~ msgstr "  -appcursorkeys on|off\n"

#~ msgid " -linewrap <on|off>\n"
#~ msgstr "  -linewrap on|off\n"

#~ msgid " -default\n"
#~ msgstr "  -default\n"

#~ msgid " -foreground <default|black|blue|cyan|green|magenta|red|white|yellow>\n"
#~ msgstr "  -foreground default|black|blue|cyan|green|magenta|red|white|yellow\n"

#~ msgid " -background <default|black|blue|cyan|green|magenta|red|white|yellow>\n"
#~ msgstr "  -background default|black|blue|cyan|green|magenta|red|white|yellow\n"

#~ msgid " -hbcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>\n"
#~ msgstr "  -hbcolor black|blue|bright|cyan|green|grey|magenta|red|white|yellow\n"

#~ msgid " -inversescreen <on|off>\n"
#~ msgstr "  -inversescreen on|off\n"

#~ msgid " -bold <on|off>\n"
#~ msgstr "  -bold on|off\n"

#~ msgid " -blink <on|off>\n"
#~ msgstr "  -blink on|off\n"

#~ msgid " -reverse <on|off>\n"
#~ msgstr "  -reverse on|off\n"

#~ msgid " -underline <on|off>\n"
#~ msgstr "  -underline on|off\n"

#~ msgid " -store\n"
#~ msgstr "  -store\n"

#~ msgid " -clear <all|rest>\n"
#~ msgstr "  -clear all|rest\n"

#~ msgid " -tabs <tab1 tab2 tab3 ...>      (tabn = 1-160)\n"
#~ msgstr "  -tabs <tab1 tab2 tab3 ...>    (tabn = 1-160)\n"

#~ msgid " -clrtabs <tab1 tab2 tab3 ...>   (tabn = 1-160)\n"
#~ msgstr "  -clrtabs <tab1 tab2 tab3 ...>    (tabn = 1-160)\n"

#~ msgid " -regtabs <1-160>\n"
#~ msgstr "  -regtabs <getal>    (<getal> = 1-160)\n"

#~ msgid " -blank <0-60|force|poke>\n"
#~ msgstr "  -blank <getal>|force|poke    (<getal> = 0-60)\n"

#~ msgid " -dump   <1-NR_CONSOLES>\n"
#~ msgstr "  -dump <consolenummer>\n"

#~ msgid " -append <1-NR_CONSOLES>\n"
#~ msgstr "  -append <consolenummer>\n"

#~ msgid " -file dumpfilename\n"
#~ msgstr "  -file <dumpbestandsnaam>\n"

#~ msgid " -msg <on|off>\n"
#~ msgstr "  -msg on|off\n"

#~ msgid " -msglevel <0-8>\n"
#~ msgstr "  -msglevel <0-8>\n"

#~ msgid " -powerdown <0-60>\n"
#~ msgstr "  -powerdown <0-60>\n"

#~ msgid " -blength <0-2000>\n"
#~ msgstr "  -blength <0-2000>\n"

#~ msgid " -bfreq freqnumber\n"
#~ msgstr "  -bfreq <belfrequentie>\n"

#~ msgid "Error writing screendump"
#~ msgstr "Fout bij schrijven van schermafdruk"

#~ msgid "Couldn't read neither /dev/vcsa0 nor /dev/vcsa"
#~ msgstr "Kan noch /dev/vcsa0 noch /dev/vcsa lezen"

#~ msgid ""
#~ "Usage: %s [options] file...\n"
#~ "\n"
#~ msgstr ""
#~ "Gebruik:  %s [opties] <bestand>...\n"
#~ "\n"

#~ msgid ""
#~ "Options:\n"
#~ "  -d        display help instead of ring bell\n"
#~ "  -f        count logical, rather than screen lines\n"
#~ "  -l        suppress pause after form feed\n"
#~ "  -p        do not scroll, clean screen and display text\n"
#~ "  -c        do not scroll, display text and clean line ends\n"
#~ "  -u        suppress underlining\n"
#~ "  -s        squeeze multiple blank lines into one\n"
#~ "  -NUM      specify the number of lines per screenful\n"
#~ "  +NUM      display file beginning from line number NUM\n"
#~ "  +/STRING  display file beginning from search string match\n"
#~ "  -V        output version information and exit\n"
#~ msgstr ""
#~ "Opties:\n"
#~ "  -d        hulp tonen in plaats van te piepen\n"
#~ "  -f        logische regels in plaats van schermregels tellen\n"
#~ "  -l        pauze na nieuwepagina (FF) onderdrukken\n"
#~ "  -p        niet scrollen; scherm wissen en tekst weergeven\n"
#~ "  -c        niet scrollen; tekst weergeven en regeleinden wissen\n"
#~ "  -u        onderstrepingen weglaten\n"
#~ "  -s        meerdere lege regels samendrukken tot eentje\n"
#~ "  -GETAL    te gebruiken aantal regels per scherm\n"
#~ "  +GETAL    bestand weergeven vanaf dit regelnummer\n"
#~ "  +/TEKENS  bestand weergeven vanaf deze tekenreeks\n"

#~ msgid "line too long"
#~ msgstr "regel is te lang"

#~ msgid "set blocksize"
#~ msgstr "blokgrootte instellen"

#~ msgid "one bad block\n"
#~ msgstr "één slecht blok\n"

#~ msgid "partition type hex or uuid"
#~ msgstr "partitietype (hex of UUID)"

#~ msgid " %s [options] device\n"
#~ msgstr "  %s [opties] <apparaat>\n"

#~ msgid "read failed %s"
#~ msgstr "lezen van %s is mislukt"

#~ msgid "seek failed %s"
#~ msgstr "'seek' op %s is mislukt"

#~ msgid "Detected %d error(s)."
#~ msgstr "Gedetecteerd: %d fout(en)."

#~ msgid "No partitions defined"
#~ msgstr "Geen partities gedefinieerd"

#~ msgid ""
#~ " -a, --all                     list all used devices\n"
#~ " -d, --detach <loopdev> [...]  detach one or more devices\n"
#~ " -D, --detach-all              detach all used devices\n"
#~ " -f, --find                    find first unused device\n"
#~ " -c, --set-capacity <loopdev>  resize device\n"
#~ " -j, --associated <file>       list all devices associated with <file>\n"
#~ msgstr ""
#~ "  -a, --all                        alle gebruikte lus-apparaten tonen\n"
#~ "  -d, --detach LUS-APPARAAT...     deze apparaten onthechten\n"
#~ "  -D, --detach-all                 alle gebruikte lus-apparaten onthechten\n"
#~ "  -f, --find                       eerste ongebruikte lus-apparaat tonen\n"
#~ "  -c, --set-capacity LUS-APPARAAT  de grootte van het apparaat wijzigen\n"
#~ "  -j, --associated BESTAND         gerelateerden aan dit bestand tonen\n"

#~ msgid "%s: failed to set up loop device, offset is not 512-byte aligned"
#~ msgstr "%s: instellen van lus-apparaat is mislukt -- de positie is niet 512-byte-uitgelijnd"

#~ msgid "unssuported --local-line mode argument"
#~ msgstr "niet-ondersteund argument: %s"

#~ msgid "usage:\n"
#~ msgstr "Gebruik:\n"

#~ msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
#~ msgstr "    Opmerking: 'elvtune' werkt alleen met 2.4 kernels\n"

#~ msgid "missing blockdevice, use -h for help\n"
#~ msgstr "ontbrekend blok-apparaat; gebruik '-h' voor hulp\n"

#~ msgid ""
#~ "elvtune is only useful on older kernels;\n"
#~ "for 2.6 use IO scheduler sysfs tunables instead..\n"
#~ msgstr ""
#~ "'elvtune' is enkel nuttig op oudere kernels;\n"
#~ "gebruik voor versie 2.6 de IO-scheduler 'sysfs tunables'\n"

#~ msgid "edition number argument failed"
#~ msgstr "ontleden van editiewaarde is mislukt"

#~ msgid "fsync failed"
#~ msgstr "fsync() is mislukt"

#~ msgid ""
#~ "Usage:\n"
#~ "Print version:\n"
#~ "        %s -v\n"
#~ "Print partition table:\n"
#~ "        %s -P {r|s|t} [options] device\n"
#~ "Interactive use:\n"
#~ "        %s [options] device\n"
#~ "\n"
#~ "Options:\n"
#~ "-a: Use arrow instead of highlighting;\n"
#~ "-z: Start with a zero partition table, instead of reading the pt from disk;\n"
#~ "-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
#~ "                the number of heads and the number of sectors/track.\n"
#~ msgstr ""
#~ "Gebruik:  %s [opties] apparaat              interactief\n"
#~ "          %s -P{r|s|t} [opties] apparaat    partitietabel weergeven\n"
#~ "Opties:\n"
#~ "-a   een pijl gebruiken in plaats van een inverse balk;\n"
#~ "-z   met lege partitietabel starten, in plaats van deze van schijf te lezen;\n"
#~ "-c C -h K -s S   andere waarden afdwingen voor het aantal cilinders,\n"
#~ "                 koppen en sectoren/spoor dan de kernel aangeeft.\n"

#~ msgid "Writing disklabel to %s.\n"
#~ msgstr "Schrijven van schijflabel naar %s.\n"

#~ msgid "Last %s or +size or +sizeM or +sizeK"
#~ msgstr "Laatste %s of +aantal of +aantalK of +aantalM"

#~ msgid "Reading disklabel of %s at sector %d.\n"
#~ msgstr "Lezen van schijflabel van %s bij sector %d.\n"

#~ msgid "BSD disklabel command (m for help): "
#~ msgstr "BSD-schijflabelopdracht (m voor hulp): "

#~ msgid "drivedata: "
#~ msgstr "schijfgegevens: "

#~ msgid "#       start       end      size     fstype   [fsize bsize   cpg]\n"
#~ msgstr "#       begin     einde   grootte   bsysteem   [grtte blgrt   cpg]\n"

#~ msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
#~ msgstr "Moet <= sectoren/spoor * sporen/cilinder zijn.\n"

#~ msgid "Partition (a-%c): "
#~ msgstr "Partitie (a-%c): "

#~ msgid "Warning: too many partitions (%d, maximum is %d).\n"
#~ msgstr "Waarschuwing: te veel partities (%d, maximum is %d).\n"

#~ msgid "Syncing disks.\n"
#~ msgstr "Leegmaken van schijfbuffers...\n"

#~ msgid ""
#~ "Usage:\n"
#~ " %1$s [options] <disk>    change partition table\n"
#~ " %1$s [options] -l <disk> list partition table(s)\n"
#~ " %1$s -s <partition>      give partition size(s) in blocks\n"
#~ "\n"
#~ "Options:\n"
#~ " -b <size>             sector size (512, 1024, 2048 or 4096)\n"
#~ " -c[=<mode>]           compatible mode: 'dos' or 'nondos' (default)\n"
#~ " -u[=<unit>]           display units: 'cylinders' or 'sectors' (default)\n"
#~ " -v                    print program version\n"
#~ " -C <number>           specify the number of cylinders\n"
#~ " -H <number>           specify the number of heads\n"
#~ " -S <number>           specify the number of sectors per track\n"
#~ msgstr ""
#~ "Gebruik:  %1$s [opties] <schijf>      partietabel wijzigen\n"
#~ "          %1$s [opties] -l <schijf>   partitietabel(len) tonen\n"
#~ "          %1$s -s <partitie>...       partitiegrootte(s) tonen in blokken\n"
#~ "\n"
#~ "Opties:\n"
#~ "  -b <grootte>      te gebruiken sectorgrootte (512, 1024, 2048 of 4096)\n"
#~ "  -c[=<modus>]      compatibiliteitsmodus; 'nondos' (standaard) of 'dos'\n"
#~ "  -u[=<eenheid>]    de weergave-eenheid; 'sectors' (standaard) of 'cylinders'\n"
#~ "  -C <getal>        te gebruiken aantal cilinders\n"
#~ "  -H <getal>        te gebruiken aantal koppen\n"
#~ "  -S <getal>        te gebruiken aantal sectoren per spoor\n"

#~ msgid "unable to seek on %s"
#~ msgstr "kan geen 'seek' doen op %s"

#~ msgid "unable to write %s"
#~ msgstr "kan niet schrijven naar %s"

#~ msgid "fatal error"
#~ msgstr "fatale fout"

#~ msgid "Command action"
#~ msgstr "Opdracht  Actie"

#~ msgid "You must set"
#~ msgstr "U moet instellen:"

#~ msgid "heads"
#~ msgstr "koppen"

#~ msgid " and "
#~ msgstr " en "

#~ msgid "Unsupported suffix: '%s'.\n"
#~ msgstr "Onbekend achtervoegsel: '%s'.\n"

#~ msgid ""
#~ "Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
#~ "            2^N: K  (KibiByte), M  (MebiByte), G  (GibiByte)\n"
#~ msgstr ""
#~ "Mogelijk zijn: 10^N: KB (kilobyte), MB (Megabyte), GB (Gigabyte)\n"
#~ "                2^N: K  (Kibibyte), M  (Mebibyte), G  (Gibibyte)\n"

#~ msgid "Using default value %u\n"
#~ msgstr "Standaardwaarde %u wordt gebruikt\n"

#~ msgid "Disk %s: %ld MB, %lld bytes"
#~ msgstr "Schijf %s: %ld MB, %lld bytes"

#~ msgid "Disk %s: %ld.%ld GB, %llu bytes"
#~ msgstr "Schijf %s: %ld.%ld GB, %llu bytes"

#~ msgid ", %llu sectors\n"
#~ msgstr ", %llu sectoren\n"

#~ msgid "cannot write disk label"
#~ msgstr "kan schijflabel niet schrijven"

#~ msgid "Error closing file\n"
#~ msgstr "Fout bij sluiten van bestand\n"

#~ msgid "Warning: setting sector offset for DOS compatibility\n"
#~ msgstr "Waarschuwing: sectorplaats wordt ingesteld voor DOS-compatibiliteit\n"

#~ msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
#~ msgstr "OSF/1-schijflabel gevonden op %s; overgegaan in schijflabelmodus.\n"

#~ msgid ""
#~ "WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
#~ "         switch off the mode (with command 'c')."
#~ msgstr ""
#~ "WAARSCHUWING: De DOS-compatibele modus wordt sterk ontraden.\n"
#~ "              Schakel de modus uit met opdracht 'c'."

#~ msgid ""
#~ "WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
#~ "         change units to sectors.\n"
#~ msgstr ""
#~ "WAARSCHUWING: De weergave-eenheid 'cilinders' wordt ontraden.\n"
#~ "              Gebruik 'u' om de eenheid op 'sectoren' in te stellen.\n"

#~ msgid "New disk identifier (current 0x%08x): "
#~ msgstr "Nieuw schijf-ID (huidige is 0x%08x): "

#~ msgid "No free sectors available\n"
#~ msgstr "Geen vrije sectoren beschikbaar\n"

#~ msgid "Last %1$s, +%2$s or +size{K,M,G}"
#~ msgstr "Laatste %s, +%s of +grootte{K,M,G}"

#~ msgid "     phys=(%d, %d, %d) "
#~ msgstr "     fysiek=(%d, %d, %d)  "

#~ msgid "logical=(%d, %d, %d)\n"
#~ msgstr "logisch=(%d, %d, %d)\n"

#~ msgid "Warning: bad start-of-data in partition %zd\n"
#~ msgstr "Waarschuwing: ongeldige start-van-gegevens in partitie %zd\n"

#~ msgid "Adding a primary partition\n"
#~ msgstr "Een primaire partitie wordt toegevoegd.\n"

#~ msgid "WARNING: If you have created or modified any DOS 6.xpartitions, please see the fdisk manual page for additionalinformation.\n"
#~ msgstr ""
#~ "WAARSCHUWING: Als u DOS-6.x-partities gemaakt of gewijzigd hebt,\n"
#~ "raadpleeg dan het fdisk-handboek voor meer informatie.\n"

#~ msgid "%*s Boot      Start         End      Blocks   Id  System\n"
#~ msgstr "%*s Opstart   Begin       Einde     Blokken   ID  Systeem\n"

#~ msgid "Disk %s: %d heads, %llu sectors, %llu cylinders\n"
#~ msgstr "Schijf %s: %d koppen, %llu sectoren, %llu cilinders\n"

#~ msgid "Nr AF  Hd Sec  Cyl  Hd Sec  Cyl     Start      Size ID\n"
#~ msgstr "Nr AF Kop Sec  Cil Kop Sec  Cil      Begin    Grootte ID\n"

#~ msgid ""
#~ "\tThere is a valid Mac label on this disk.\n"
#~ "\tUnfortunately fdisk(1) cannot handle these disks.\n"
#~ "\tUse either pdisk or parted to modify the partition table.\n"
#~ "\tNevertheless some advice:\n"
#~ "\t1. fdisk will destroy its contents on write.\n"
#~ "\t2. Be sure that this disk is NOT a still vital\n"
#~ "\t   part of a volume group. (Otherwise you may\n"
#~ "\t   erase the other disks as well, if unmirrored.)\n"
#~ msgstr ""
#~ "    Er staat een geldig Mac-label op deze schijf.\n"
#~ "    Helaas ondersteunt 'fdisk' dit type label niet.\n"
#~ "    Gebruik 'parted' om de partitietabel aan te passen.\n"
#~ "    Toch wat advies:\n"
#~ "    1. Bij schrijven zal fdisk de inhoud ervan WISSEN.\n"
#~ "    2. Controleer dat deze schijf ECHT NIET nog deel uitmaakt\n"
#~ "       van een volumengroep -- anders wist u mogelijk de andere\n"
#~ "       schijven ook, als er geen mirror is.\n"

#~ msgid ""
#~ "\tSorry - this fdisk cannot handle Mac disk labels.\n"
#~ "\tIf you want to add DOS-type partitions, create\n"
#~ "\ta new empty DOS partition table first. (Use o.)\n"
#~ "\tWARNING: This will destroy the present disk contents.\n"
#~ msgstr ""
#~ "    Sorry -- deze fdisk ondersteunt geen Mac-schijflabels.\n"
#~ "    Als u partities van het DOS-type wilt toevoegen, maak dan\n"
#~ "    eerst een nieuwe, lege DOS-partitietabel.  (Gebruik 'o'.)\n"
#~ "    WAARSCHUWING: Dit zal de huidige schijfinhoud wissen.\n"

#~ msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n"
#~ msgstr "Volgens 'MIPS Computer Systems' mag het label niet meer dan 512 bytes bevatten.\n"

#~ msgid ""
#~ "Disk %s (SGI disk label): %d heads, %llu sectors, %llu cylinders\n"
#~ "Units = %s of %d * %ld bytes\n"
#~ msgstr ""
#~ "Schijf %s (SGI-schijflabel): %d koppen, %llu sectoren, %llu cilinders\n"
#~ "Eenheid = %s van %d * %ld bytes\n"

#~ msgid ""
#~ "----- partitions -----\n"
#~ "Pt# %*s  Info     Start       End   Sectors  Id  System\n"
#~ msgstr ""
#~ "----- Partities -----\n"
#~ "Pt# %*s  Info     Begin     Einde  Sectoren  ID  Systeem\n"

#~ msgid ""
#~ "----- Bootinfo -----\n"
#~ "Bootfile: %s\n"
#~ "----- Directory Entries -----\n"
#~ msgstr ""
#~ "----- Opstartinfo -----\n"
#~ "Opstartbestand: %s\n"
#~ "----- Mapingangen -----\n"

#~ msgid "%2zd: %-10s sector%5u size%8u\n"
#~ msgstr "%2zd: %-10s sector%5u grootte%8u\n"

#~ msgid "No partitions defined\n"
#~ msgstr "Geen partities gedefinieerd\n"

#~ msgid ""
#~ "The entire disk partition is only %d diskblock large,\n"
#~ "but the disk is %d diskblocks long.\n"
#~ msgstr ""
#~ "De gehele-schijfpartitie is slechts %d schijfblokken groot,\n"
#~ "maar de schijf is %d schijfblokken.\n"

#~ msgid "Partition %d does not start on cylinder boundary.\n"
#~ msgstr "Partitie %d begint niet op een cilindergrens.\n"

#~ msgid "Partition %d does not end on cylinder boundary.\n"
#~ msgstr "Partitie %d eindigt niet op een cilindergrens.\n"

#~ msgid "Partition %zd is already defined.  Delete it before re-adding it.\n"
#~ msgstr ""
#~ "Partitie %zd is al gedefinieerd.  Verwijder deze eerst,\n"
#~ "en voeg hem dan opnieuw toe.\n"

#~ msgid " Last %s"
#~ msgstr " Laatste %s"

#~ msgid "Building a new SGI disklabel.\n"
#~ msgstr "Aanmaken van een nieuw SGI-schijflabel.\n"

#~ msgid "HDIO_GETGEO ioctl failed on %s"
#~ msgstr "ioctl(HDIO_GETGEO) is mislukt op %s"

#~ msgid ""
#~ "Warning:  BLKGETSIZE ioctl failed on %s.  Using geometry cylinder value of %llu.\n"
#~ "This value may be truncated for devices > 33.8 GB.\n"
#~ msgstr ""
#~ "Waarschuwing: ioctl(BLKGETSIZE) is mislukt op %s.\n"
#~ "Cilindergeometriewaarde %llu wordt nu gebruikt.\n"
#~ "Deze waarde kan voor apparaten groter dan 33.8 GB afgekapt zijn.\n"

#~ msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
#~ msgstr "ID=%02x\tStart=%d\tLengte=%d\n"

#~ msgid "Trying to keep parameters of partitions already set.\n"
#~ msgstr "Er wordt geprobeerd reeds ingestelde partitieparameters te behouden.\n"

#~ msgid "YES\n"
#~ msgstr "JA\n"

#~ msgid "Building a new Sun disklabel."
#~ msgstr "Aanmaken van een nieuw Sun-schijflabel."

#~ msgid ""
#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
#~ "%llu cylinders, %d alternate cylinders, %d physical cylinders\n"
#~ "%d extra sects/cyl, interleave %d:1\n"
#~ "Label ID: %s\n"
#~ "Volume ID: %s\n"
#~ "Units = %s of %d * 512 bytes\n"
#~ msgstr ""
#~ "Schijf %s (Sun-schijflabel): %u koppen, %llu sectoren, %d rpm\n"
#~ "%llu cilinders, %d alternatieve cilinders, %d fysieke cilinders\n"
#~ "%d extra sectoren/cilinder, tussenruimte %d:1\n"
#~ "Label-ID: %s\n"
#~ "Volumen-ID: %s\n"
#~ "Eenheid = %s van %d * 512 bytes\n"

#~ msgid ""
#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %llu cylinders\n"
#~ "Units = %s of %d * 512 bytes\n"
#~ msgstr ""
#~ "Schijf %s (Sun-schijflabel): %u koppen, %llu sectoren, %llu cilinders\n"
#~ "Eenheid = %s van %d * 512 bytes\n"

#~ msgid "%*s Flag    Start       End    Blocks   Id  System\n"
#~ msgstr "%*s Optie   Begin     Einde   Blokken   ID  Systeem\n"

#~ msgid "%s -An device\t activate partition n, inactivate the other ones\n"
#~ msgstr "%s -An apparaat        partitie n activeren, alle andere de-activeren\n"

#~ msgid "Done\n"
#~ msgstr "Voltooid\n"

#~ msgid "WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion."
#~ msgstr "WAARSCHUWING: GPT-ondersteuning in fdisk is nieuw en nog in een experimenteel stadium. Gebruik op eigen risico."

#~ msgid "Created partition %zd\n"
#~ msgstr "Partitie %zd is aangemaakt\n"

#~ msgid "Building a new GPT disklabel (GUID: %08X-%04X-%04X-%02X%02X-%02X%02X%02X%02X%02X%02X)\n"
#~ msgstr "Aanmaken van een nieuw GPT-schijflabel (GUID: %08X-%04X-%04X-%02X%02X-%02X%02X%02X%02X%02X%02X)\n"

#~ msgid " %s [options] -u <USER> COMMAND\n"
#~ msgstr "  %s [opties] -u GEBRUIKER OPDRACHT\n"

#~ msgid " %s [options] [-] [USER [arg]...]\n"
#~ msgstr "  %s [opties] [-] [GEBRUIKER [<argument>...]]\n"

#~ msgid ""
#~ " -1, --one        show only current month (default)\n"
#~ " -3, --three      show previous, current and next month\n"
#~ " -s, --sunday     Sunday as first day of week\n"
#~ " -m, --monday     Monday as first day of week\n"
#~ " -j, --julian     output Julian dates\n"
#~ " -y, --year       show whole current year\n"
#~ msgstr ""
#~ "  -1, --one        huidige maand tonen (standaard)\n"
#~ "  -3, --three      vorige, huidige en volgende maand tonen\n"
#~ "  -s, --sunday     zondag is eerste dag van de week\n"
#~ "  -m, --monday     maandag is eerste dag van de week\n"
#~ "  -j, --julian     Juliaanse datums weergeven\n"
#~ "  -y, --year       het hele huidige jaar tonen\n"

#~ msgid ""
#~ " -d, --udp             use UDP only\n"
#~ " -i, --id              log the process ID too\n"
#~ " -f, --file <file>     log the contents of this file\n"
#~ msgstr ""
#~ "  -d, --udp              alleen UDP gebruiken\n"
#~ "  -i, --id               het proces-ID ook vastleggen\n"
#~ "  -f, --file <bestand>   de inhoud van dit bestand loggen\n"

#~ msgid ""
#~ " -n, --server <name>   write to this remote syslog server\n"
#~ " -P, --port <number>   use this UDP port\n"
#~ " -p, --priority <prio> mark given message with this priority\n"
#~ " -s, --stderr          output message to standard error as well\n"
#~ msgstr ""
#~ "  -n, --server <naam>    naar deze syslog-server op afstand schrijven\n"
#~ "  -P, --port <nummer>    deze UDP-poort gebruiken\n"
#~ "  -p, --priority <prio>  de te schrijven regels met deze prioriteit markeren\n"
#~ "  -s, --stderr           de regels ook naar standaardfoutuitvoer schrijven\n"

#~ msgid ""
#~ " -t, --tag <tag>       mark every line with this tag\n"
#~ " -u, --socket <socket> write to this Unix socket\n"
#~ msgstr ""
#~ "  -t, --tag <tekstje>    elke regel labelen met dit tekstje\n"
#~ "  -u, --socket <socket>  naar deze Unix-socket schrijven\n"

#~ msgid "Failed to open/create %s: %m\n"
#~ msgstr "Openen/aanmaken van %s is mislukt: %m\n"

#~ msgid "Failed to lock %s: %m\n"
#~ msgstr "Vergrendelen van %s is mislukt: %m\n"

#~ msgid "Bad number: %s\n"
#~ msgstr "Ongeldig getal: %s\n"

#~ msgid "--notime can't be used together with --ctime or --reltime"
#~ msgstr "optie '--notime' gaat niet samen '--ctime'  of '--reltime'"

#~ msgid "find unused loop device failed"
#~ msgstr "kan geen ongebruikt lus-apparaat vinden"

#~ msgid ""
#~ " -n, --nobanner          do not print banner, works only for root\n"
#~ " -t, --timeout <timeout> write timeout in seconds\n"
#~ msgstr ""
#~ "  -n, --nobanner          kopregels niet weergeven (werkt alleen voor root)\n"
#~ "  -t, --timeout <aantal>  maximaal dit aantal seconden wachten, dan opgeven\n"

#~ msgid ""
#~ "Usage:\n"
#~ " %s [options] file...\n"
#~ msgstr "Gebruik:  %s [opties] <bestand>...\n"

#~ msgid ""
#~ "Options:\n"
#~ " -b              one-byte octal display\n"
#~ " -c              one-byte character display\n"
#~ " -C              canonical hex+ASCII display\n"
#~ " -d              two-byte decimal display\n"
#~ " -o              two-byte octal display\n"
#~ " -x              two-byte hexadecimal display\n"
#~ " -e format       format string to be used for displaying data\n"
#~ " -f format_file  file that contains format strings\n"
#~ " -n length       interpret only length bytes of input\n"
#~ " -s offset       skip offset bytes from the beginning\n"
#~ " -v              display without squeezing similar lines\n"
#~ " -V              output version information and exit\n"
#~ msgstr ""
#~ "Opties:\n"
#~ " -b              eenbytes-octale weergave\n"
#~ " -c              eenbytes-tekstuele weergave\n"
#~ " -C              kanonieke weergave: hex plus ASCII\n"
#~ " -d              tweebytes-decimale weergave\n"
#~ " -o              tweebytes-octale weergave\n"
#~ " -x              tweebytes-hexadecimale weergave\n"
#~ " -e OPMAAK       te gebruiken opmaaktekenreeks voor weergave\n"
#~ " -f OPMAAKBESTAND  te gebruiken opmaaktekenreeksen uit dit bestand halen\n"
#~ " -n AANTAL       slechts dit aantal bytes van de invoer weergeven\n"
#~ " -s POSITIE      op deze positie in het bestand beginnen\n"
#~ " -v              gelijkende regels niet samendrukken\n"

#~ msgid "crypt failed: %m\n"
#~ msgstr "crypt() is mislukt: %m\n"

#~ msgid "Can not fork: %m\n"
#~ msgstr "Kan geen nieuw proces starten: %m\n"

#~ msgid "bug in xstrndup call"
#~ msgstr "*programmeerfout* in aanroep van xstrndup()"

#~ msgid ""
#~ "Options:\n"
#~ " -A         check all filesystems\n"
#~ " -R         skip root filesystem; useful only with `-A'\n"
#~ " -M         do not check mounted filesystems\n"
#~ " -t <type>  specify filesystem types to be checked;\n"
#~ "              type is allowed to be comma-separated list\n"
#~ " -P         check filesystems in parallel, including root\n"
#~ " -r         report statistics for each device fsck\n"
#~ " -s         serialize fsck operations\n"
#~ " -l         lock the device using flock()\n"
#~ " -N         do not execute, just show what would be done\n"
#~ " -T         do not show the title on startup\n"
#~ " -C <fd>    display progress bar; file descriptor is for GUIs\n"
#~ " -V         explain what is being done\n"
#~ " -?         display this help and exit\n"
#~ "See fsck.* commands for fs-options."
#~ msgstr ""
#~ "Opties:\n"
#~ "  -A          alle bestandssystemen controleren\n"
#~ "  -R          het basisbestandssyteem overslaan (nuttig samen met '-A')\n"
#~ "  -M          aangekoppelde bestandssystemen niet controleren\n"
#~ "  -t <soort>  alleen deze bestandssysteemsoorten controleren;\n"
#~ "                <soort> mag een kommagescheiden lijst zijn\n"
#~ "  -P          bestandssystemen parallel controleren, ook het basissysteem\n"
#~ "  -r          statistieken weergeven voor elke apparaatcontrole\n"
#~ "  -s          de 'fsck'-bewerkingen serialiseren\n"
#~ "  -l          het apparaat vergrendelen met flock()\n"
#~ "  -N          niets echt doen, alleen tonen wat er gedaan zou worden\n"
#~ "  -T          geen titel tonen bij de programmastart\n"
#~ "  -C [<bd>]   voortgangsbalk tonen; de bestandsdescriptor is voor GUI's\n"
#~ "  -V          weergeven wat er gedaan wordt\n"
#~ "\n"
#~ "Zie de betreffende 'fsck.*'-opdrachten voor bestandssysteemopties."

#~ msgid ""
#~ "Options:\n"
#~ " -d, --divisor=NUM      divide bytes NUM\n"
#~ " -x, --sectors          show sector count and size\n"
#~ msgstr ""
#~ "Opties:\n"
#~ "  -d, --divisor=GETAL    de lengte van het ISO-bestand door GETAL delen\n"
#~ "  -x, --sectors          het aantal sectoren en de sectorgrootte tonen\n"

#~ msgid ""
#~ "Options:\n"
#~ " -t, --type=TYPE  file system type, when undefined ext2 is used\n"
#~ "     fs-options   parameters to real file system builder\n"
#~ "     device       path to a device\n"
#~ "     size         number of blocks on the device\n"
#~ " -V, --verbose    explain what is done\n"
#~ "                  defining -V more than once will cause a dry-run\n"
#~ msgstr ""
#~ "Opties:\n"
#~ "  -t, --type=SOORT    bestandssysteemsoort (wanneer niet gegeven: ext2)\n"
#~ "      bs-opties       argumenten voor de feitelijke bestandsysteemmaker\n"
#~ "      apparaat        pad naar een apparaat\n"
#~ "      grootte         aantal blokken op het apparaat\n"
#~ "  -V, --verbose       weergeven wat er gedaan wordt; meerdere '-V's\n"
#~ "                         veroorzaken een effectloos doen-alsof\n"

#~ msgid "mkfs (%s)\n"
#~ msgstr "mkfs (%s)\n"

#~ msgid "strtol error: number of blocks not specified"
#~ msgstr "fout in strtol(): aantal blokken niet aangegeven"

#~ msgid "one bad page\n"
#~ msgstr "één slechte pagina\n"

#~ msgid "        on whole disk. "
#~ msgstr "        op de gehele schijf. "

#~ msgid "does not support swapspace version %d."
#~ msgstr "ondersteunt wisselgeheugenversie %d niet."

#~ msgid "Warning!!  Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
#~ msgstr ""
#~ "Waarschuwing!!  Niet-ondersteunde GPT (GUID-partitietabel) gevonden!\n"
#~ "Gebruik GNU 'parted'."

#~ msgid ""
#~ "\tThere is a valid AIX label on this disk.\n"
#~ "\tUnfortunately Linux cannot handle these\n"
#~ "\tdisks at the moment.  Nevertheless some\n"
#~ "\tadvice:\n"
#~ "\t1. fdisk will destroy its contents on write.\n"
#~ "\t2. Be sure that this disk is NOT a still vital\n"
#~ "\t   part of a volume group. (Otherwise you may\n"
#~ "\t   erase the other disks as well, if unmirrored.)\n"
#~ "\t3. Before deleting this physical volume be sure\n"
#~ "\t   to remove the disk logically from your AIX\n"
#~ "\t   machine.  (Otherwise you become an AIXpert)."
#~ msgstr ""
#~ "    Er staat een geldig AIX-label op deze schijf.\n"
#~ "    Helaas ondersteunt Linux deze schijven op dit moment niet.\n"
#~ "    Toch wat advies:\n"
#~ "    1. Bij schrijven zal fdisk de inhoud ervan WISSEN.\n"
#~ "    2. Controleer of deze schijf ECHT NIET nog deel uitmaakt\n"
#~ "       van een volumengroep -- anders wist u mogelijk de andere\n"
#~ "       schijven ook, als er geen mirror is.\n"
#~ "    3. Haal, voordat u dit fysieke volumen wist, de schijf logisch\n"
#~ "       uit uw AIX-machine.  (Anders wordt u een AIXpert)."

#~ msgid ""
#~ "\tSorry - this fdisk cannot handle AIX disk labels.\n"
#~ "\tIf you want to add DOS-type partitions, create\n"
#~ "\ta new empty DOS partition table first. (Use o.)\n"
#~ "\tWARNING: This will destroy the present disk contents.\n"
#~ msgstr ""
#~ "    Sorry -- deze fdisk ondersteunt geen AIX-schijflabels.\n"
#~ "    Als u partities van het DOS-type wilt toevoegen, maak dan\n"
#~ "    eerst een nieuwe, lege DOS-partitietabel.  (Gebruik 'o'.)\n"
#~ "    WAARSCHUWING: Dit zal de huidige schijfinhoud wissen.\n"

#~ msgid "BSD label for device: %s\n"
#~ msgstr "BSD-label voor apparaat: %s\n"

#~ msgid "Warning: partition %d has empty type\n"
#~ msgstr "Waarschuwing: partitie %d heeft een lege typeaanduiding\n"

#~ msgid "Partition %i does not end on cylinder boundary.\n"
#~ msgstr "Partitie %i eindigt niet op een cilindergrens.\n"

#~ msgid "WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n"
#~ msgstr ""
#~ "Waarschuwing: GPT (GUID-partitietabel) gevonden op '%s'!\n"
#~ "Het programma 'fdisk' ondersteunt GPT niet.  Gebruik GNU 'parted'.\n"

#~ msgid "Note: sector size is %ld (not %d)\n"
#~ msgstr "Let op: sectorgrootte is %ld (niet %d)\n"

#~ msgid "WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n"
#~ msgstr ""
#~ "Waarschuwing: GPT (GUID-partitietabel) gevonden op '%s'!\n"
#~ "Het programma 'sfdisk' ondersteunt GPT niet.  Gebruik GNU 'parted'.\n"

#~ msgid "Use the --force flag to overrule this check.\n"
#~ msgstr "Gebruik '--force' om deze controle over te slaan.\n"

#~ msgid ""
#~ " -, -l, --login               make the shell a login shell\n"
#~ " -c, --command <command>      pass a single command to the shell with -c\n"
#~ " --session-command <command>  pass a single command to the shell with -c\n"
#~ "                              and do not create a new session\n"
#~ " -f, --fast                   pass -f to the shell (for csh or tcsh)\n"
#~ " -m, --preserve-environment   do not reset environment variables\n"
#~ " -p                           same as -m\n"
#~ " -s, --shell <shell>          run shell if /etc/shells allows it\n"
#~ msgstr ""
#~ "  -, -l, --login               van de shell een login-shell maken\n"
#~ "  -c, --command COMMANDO       een enkel COMMANDO naar de shell sturen met '-c'\n"
#~ "  --session-command COMMANDO   een enkel COMMANDO naar de shell sturen met '-c'\n"
#~ "                                 en geen nieuwe sessie aanmaken\n"
#~ "  -f, --fast                   '-f' aan de shell meegeven (voor 'csh' of 'tcsh')\n"
#~ "  -m, --preserve-environment   de omgevingsvariabelen niet resetten\n"
#~ "  -p                           hetzelfde als '-m'\n"
#~ "  -s, --shell SHELL            SHELL uitvoeren (als /etc/shells dit toestaat)\n"

#~ msgid "%s: exec failed"
#~ msgstr "%s: exec() is mislukt"

#~ msgid "TIOCSCTTY: ioctl failed"
#~ msgstr "ioctl(TIOCSCTTY) is mislukt"

#~ msgid "usage: %s [+format] [day month year]\n"
#~ msgstr "Gebruik:  %s [+opmaak] [dag maand jaar]\n"

#~ msgid "St. Tib's Day"
#~ msgstr "Sint Tibs-dag"

#~ msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
#~ msgstr "Gebruik:  %s [ -s signaal | -p ] [ -a ] PID...\n"

#~ msgid "       %s -l [ signal ]\n"
#~ msgstr "          %s -l [ signaal ]\n"

#~ msgid "connect %s"
#~ msgstr "verbinding %s"

#~ msgid "invalid port number argument"
#~ msgstr "ongeldig poortnummer-argument"

#~ msgid ""
#~ "Usage:\n"
#~ " %s [options] [<device> ...]\n"
#~ msgstr "Gebruik:  %s [opties] [apparaat ...]\n"

#~ msgid ""
#~ " -f <file>  define search scope\n"
#~ " -b         search only binaries\n"
#~ " -B <dirs>  define binaries lookup path\n"
#~ " -m         search only manual paths\n"
#~ " -M <dirs>  define man lookup path\n"
#~ " -s         search only sources path\n"
#~ " -S <dirs>  define sources lookup path\n"
#~ " -u         search from unusual entities\n"
#~ msgstr ""
#~ "  -b            alleen naar programma's zoeken\n"
#~ "  -B <mappen>   te gebruiken zoekpad voor programma's\n"
#~ "  -f <bestand>  definitie van het zoekbereik\n"
#~ "  -m            alleen naar handleidingen zoeken\n"
#~ "  -M <mappen>   te gebruiken zoekpad voor handleidingen\n"
#~ "  -s            alleen naar brontekstbestanden zoeken\n"
#~ "  -S <mappen>   te gebruiken zoekpad voor brontekstbestanden\n"
#~ "  -u            naar ongebruikelijke dingen zoeken\n"

#~ msgid "See how to use file and dirs arguments from whereis(1) manual.\n"
#~ msgstr "Zie de whereis(1) handleiding voor het gebruik van <bestand> en <mappen>.\n"

#~ msgid "mount: couldn't lock into memory"
#~ msgstr "mount: kan pagina's niet vastzetten in het geheugen"

#~ msgid "mount: argument to -p or --pass-fd must be a number"
#~ msgstr "mount: argument van '-p' of '--pass-fd' moet een getal zijn"

#~ msgid "executing %s failed"
#~ msgstr "uitvoeren van '%s' is mislukt"

#~ msgid "eject: cannot set user id"
#~ msgstr "eject: kan gebruikers-ID niet instellen"

#~ msgid ""
#~ " -f, --freeze      freeze the filesystem\n"
#~ " -u, --unfreeze    unfreeze the filesystem\n"
#~ msgstr ""
#~ "  -f, --freeze      het bestandssysteem bevriezen\n"
#~ "  -u, --unfreeze    het bestandssysteem ontdooien\n"

#~ msgid "max seg size (kbytes) = %lu\n"
#~ msgstr "maximale segmentgrootte (kilobytes) = %lu\n"

#~ msgid "min seg size (bytes) = %lu\n"
#~ msgstr "minimale segmentgrootte (bytes) = %lu\n"

#~ msgid "used space = %d bytes\n"
#~ msgstr "gebruikte ruimte = %d bytes\n"

#~ msgid "shmctl failed"
#~ msgstr "shmctl() is mislukt"

#~ msgid "msgctl failed"
#~ msgstr "msgctl() is mislukt"

#~ msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
#~ msgstr ""
#~ "gebruikte bytes=%ld  wachtrijbytes=%ld  aantal berichten=%ld\n"
#~ "laatste-zender-PID=%d  laatste-ontvanger-PID=%d\n"

#~ msgid ""
#~ " -e, --encryption <type>       enable encryption with specified <name/num>\n"
#~ " -o, --offset <num>            start at offset <num> into file\n"
#~ "     --sizelimit <num>         device limited to <num> bytes of the file\n"
#~ " -p, --pass-fd <num>           read passphrase from file descriptor <num>\n"
#~ " -P, --partscan                create partitioned loop device\n"
#~ " -r, --read-only               setup read-only loop device\n"
#~ "     --show                    print device name after setup (with -f)\n"
#~ " -v, --verbose                 verbose mode\n"
#~ msgstr ""
#~ "  -e, --encryption SOORT    deze soort versleuteling inschakelen\n"
#~ "  -o, --offset GETAL        op deze positie in het bestand beginnen\n"
#~ "      --sizelimit GETAL     slechts dit aantal bytes van bestand gebruiken\n"
#~ "  -p, --pass-fd NUMMER      wachtwoordtekst uit deze bestandsdescriptor lezen\n"
#~ "  -P, --partscan            gepartitioneerd lus-apparaat aanmaken\n"
#~ "  -r, --read-only           een alleen-lezen lus-apparaat instellen\n"
#~ "      --show                apparaatnaam tonen (bij '-f BESTAND')\n"
#~ "  -v, --verbose             gedetailleerde uitvoer produceren\n"

#~ msgid "invalid passphrase file descriptor"
#~ msgstr "ongeldige wachtwoordtekst-bestandsdescriptor"

#~ msgid "%s failed to use device"
#~ msgstr "%s: gebruiken van apparaat is mislukt"

#~ msgid "couldn't lock into memory"
#~ msgstr "kan pagina's niet vastzetten in het geheugen"

#~ msgid ""
#~ " -a, --all               print online and offline CPUs (default for -e)\n"
#~ " -b, --online            print online CPUs only (default for -p)\n"
#~ " -c, --offline           print offline CPUs only\n"
#~ " -e, --extended[=<list>] print out an extended readable format\n"
#~ " -p, --parse[=<list>]    print out a parsable format\n"
#~ " -s, --sysroot <dir>     use directory DIR as system root\n"
#~ " -x, --hex               print hexadecimal masks rather than lists of CPUs\n"
#~ msgstr ""
#~ "  -a, --all               online en offline CPU's tonen (standaard bij '-e')\n"
#~ "  -b, --online            alleen online CPU's tonen (standaard bij '-p')\n"
#~ "  -c, --offline           alleen offline CPU's tonen\n"
#~ "  -e, --extended[=LIJST]  uitgebreide, leesbare uitvoer produceren\n"
#~ "  -p, --parse[=LIJST]     ontleedbare uitvoer produceren\n"
#~ "  -s, --sysroot MAP       deze map als hoofdmap gebruiken\n"
#~ "  -x, --hex               hexadecimale maskers tonen in plaats van lijsten\n"

#~ msgid "%s: failed to setup loop device (probably unknown encryption type)"
#~ msgstr "%s: instellen van lus-apparaat is mislukt (vermoedelijk onbekend versleutelingstype)"

#~ msgid "renice from %s\n"
#~ msgstr "'renice' uit %s\n"

#~ msgid ""
#~ " -d, --device <device>    select rtc device (rtc0|rtc1|...)\n"
#~ " -n, --dry-run            does everything, but suspend\n"
#~ " -l, --local              RTC uses local timezone\n"
#~ " -m, --mode <mode>        standby|mem|... sleep mode\n"
#~ " -s, --seconds <seconds>  seconds to sleep\n"
#~ " -t, --time <time_t>      time to wake\n"
#~ " -u, --utc                RTC uses UTC\n"
#~ " -v, --verbose            verbose messages\n"
#~ msgstr ""
#~ "  -d, --device <apparaat>   te gebruiken hardwareklok (rtc0|rtc1|...)\n"
#~ "  -l, --local               de hardwareklok bevat lokale tijd\n"
#~ "  -m, --mode <modus>        slaapmodus (waarden: standby|mem|disk|...\n"
#~ "                               oftewel: wachtstand,pauzestand,slaapstand,...)\n"
#~ "  -n, --dry-run             alles doen behalve gaan slapen\n"
#~ "  -s, --seconds <seconden>  aantal te slapen seconden\n"
#~ "  -t, --time <tijdstip>     ontwakingstijdstip\n"
#~ "  -u, --utc                 de hardwareklok bevat UTC\n"
#~ "  -v, --verbose             gedetailleerde uitvoer produceren\n"

#~ msgid "unable to execute %s"
#~ msgstr "kan %s niet uitvoeren"

#~ msgid ""
#~ " -v, --verbose            says what options are being switched on\n"
#~ " -R, --addr-no-randomize  disables randomization of the virtual address space\n"
#~ " -F, --fdpic-funcptrs     makes function pointers point to descriptors\n"
#~ " -Z, --mmap-page-zero     turns on MMAP_PAGE_ZERO\n"
#~ " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
#~ " -X, --read-implies-exec  turns on READ_IMPLIES_EXEC\n"
#~ " -B, --32bit              turns on ADDR_LIMIT_32BIT\n"
#~ " -I, --short-inode        turns on SHORT_INODE\n"
#~ " -S, --whole-seconds      turns on WHOLE_SECONDS\n"
#~ " -T, --sticky-timeouts    turns on STICKY_TIMEOUTS\n"
#~ " -3, --3gb                limits the used address space to a maximum of 3 GB\n"
#~ "     --4gb                ignored (for backward compatibility only)\n"
#~ "     --uname-2.6          turns on UNAME26\n"
#~ msgstr ""
#~ "  -v, --verbose             melden welke opties ingeschakeld worden\n"
#~ "  -B, --32bit               ADDR_LIMIT_32BIT inschakelen\n"
#~ "  -F, --fdpic-funcptrs      functiepointers naar descriptors laten wijzen\n"
#~ "  -I, --short-inode         SHORT_INODE inschakelen\n"
#~ "  -L, --addr-compat-layout  virtueel geheugen op andere manier toewijzen\n"
#~ "  -R, --addr-no-randomize   virtuele adresruimte niet husselen\n"
#~ "  -S, --whole-seconds       WHOLE_SECONDS inschakelen\n"
#~ "  -T, --sticky-timeouts     STICKY_TIMEOUTS inschakelen\n"
#~ "  -X, --read-implies-exec   READ_IMPLIES_EXEC inschakelen\n"
#~ "  -Z, --mmap-page-zero      MMAP_PAGE_ZERO inschakelen\n"
#~ "  -3, --3gb                 gebruikte adresruimte tot 3 GB beperken\n"
#~ "      --4gb                 (genegeerd, slechts herkend voor compatibiliteit)\n"
#~ "      --uname-2.6           UNAME26 inschakelen\n"

#~ msgid "execvp failed"
#~ msgstr "execvp() is mislukt"

#~ msgid "execv failed"
#~ msgstr "execv() is mislukt"

#~ msgid ""
#~ " -m, --mount       unshare mounts namespace\n"
#~ " -u, --uts         unshare UTS namespace (hostname etc)\n"
#~ " -i, --ipc         unshare System V IPC namespace\n"
#~ " -n, --net         unshare network namespace\n"
#~ msgstr ""
#~ "Voert een programma uit met sommige naamsruimten ontkoppeld van moederproces.\n"
#~ "\n"
#~ "  -i, --ipc      'System V IPC'-naamsruimte niet delen\n"
#~ "  -m, --mount    aankoppelingennaamsruimte niet delen\n"
#~ "  -n, --net      netwerknaamsruimte niet delen\n"
#~ "  -u, --uts      UTS-naamsruimte niet delen (hostnaam en dergelijke)\n"

#~ msgid "%-15s%s [version %x]\n"
#~ msgstr "%-15s%s [versie %x]\n"

#~ msgid "users"
#~ msgstr "gebruikers"

#~ msgid "too many iov's (change code in wall/ttymsg.c)"
#~ msgstr ""
#~ "**Interne programmafout**: te veel IOV's\n"
#~ "[de programmacode in term-utils/ttymsg.c moet aangepast worden]"

#~ msgid "write error."
#~ msgstr "schrijffout"

#~ msgid ""
#~ " -c, --columns <width>    width of output in number of characters\n"
#~ " -t, --table              create a table\n"
#~ " -s, --separator <string> table delimeter\n"
#~ " -x, --fillrows           fill rows before columns\n"
#~ msgstr ""
#~ "  -c, --columns <breedte>    breedte van de uitvoer in aantal tekens\n"
#~ "  -s, --separator <tekens>   scheidingstekenreeks voor tabellen\n"
#~ "  -t, --table                een tabel aanmaken\n"
#~ "  -x, --fillrows             rijen eerder vullen dan kolommen\n"

#~ msgid ""
#~ "Usage:\n"
#~ " %s [options] [file...]\n"
#~ msgstr "Gebruik:  %s [opties] [<bestand>...]\n"

#~ msgid ""
#~ "Options:\n"
#~ " -t, --terminal TERMINAL    override the TERM environment variable\n"
#~ " -i, --indicated            underlining is indicated via a separate line\n"
#~ msgstr ""
#~ "Opties:\n"
#~ "  -t, --terminal TERMINAL    niet omgevingsvariabele TERM maar deze gebruiken\n"
#~ "  -i, --indicated            onderstrepingen weergeven op een extra regel\n"

#~ msgid ""
#~ "usage: %s [-hv] [-x dir] file\n"
#~ " -x dir     extract into dir\n"
#~ " -v         be more verbose\n"
#~ " file       file to test\n"
#~ msgstr ""
#~ "Gebruik:  %s [-hv] [-x MAP] BESTAND\n"
#~ "\n"
#~ "  -v        meer informatie weergeven\n"
#~ "  -x MAP    uitpakken in deze map\n"
#~ "  BESTAND   te testen bestand\n"

#~ msgid "Usage: %s [-larvsmf] /dev/name\n"
#~ msgstr "Gebruik:  %s [-larvsmf] /dev/naam\n"

#~ msgid "cannot stat device %s"
#~ msgstr "kan apparaat %s niet vinden"

#~ msgid "failed to parse blocksize argument"
#~ msgstr "ontleden van blokgroottewaarde is mislukt"

#~ msgid "error: will not try to make swapdevice on '%s'"
#~ msgstr "fout: zal niet proberen wisselgeheugen te maken op '%s'"

#~ msgid "Cannot open master raw device '%s' (%s)\n"
#~ msgstr "Kan 'raw'-besturingsapparaat '%s' niet openen (%s)\n"

#~ msgid "%s: failed to open"
#~ msgstr "%s: openen is mislukt"

#~ msgid ""
#~ "Usage: %s [options] <device>\n"
#~ "\n"
#~ "Options:\n"
#~ msgstr ""
#~ "Gebruik:  %s [opties] <apparaat>\n"
#~ "\n"
#~ "Opties:\n"

#~ msgid "Cannot open file '%s'"
#~ msgstr "Kan bestand '%s' niet openen"

#~ msgid ""
#~ "This disk has both DOS and BSD magic.\n"
#~ "Give the 'b' command to go to BSD mode.\n"
#~ msgstr ""
#~ "Deze schijf bevat zowel DOS- als BSD-vingerafdrukken.\n"
#~ "Geef de opdracht 'b' om naar BSD-modus te gaan.\n"

#~ msgid "Partition %i does not start on cylinder boundary:\n"
#~ msgstr "Partitie %i begint niet op een cilindergrens:\n"

#~ msgid "should be (%d, %d, 1)\n"
#~ msgstr "moet zijn (%d, %d, 1)\n"

#~ msgid "should be (%d, %d, %d)\n"
#~ msgstr "moet zijn (%d, %d, %d)\n"

#~ msgid "This kernel finds the sector size itself - -b option ignored\n"
#~ msgstr "Deze kernel vindt zelf de sectorgrootte -- optie '-b' wordt genegeerd\n"

#~ msgid "sfdisk: premature end of input\n"
#~ msgstr "sfdisk: voortijdig einde van de invoer\n"

#~ msgid "WARNING: couldn't open %s"
#~ msgstr "WAARSCHUWING: kan %s niet openen"

#~ msgid "WARNING: bad format on line %d of %s"
#~ msgstr "WAARSCHUWING: ongeldige syntax op regel %d van %s"

#~ msgid ""
#~ "WARNING: Your /etc/fstab does not contain the fsck passno\n"
#~ "\tfield.  I will kludge around things for you, but you\n"
#~ "\tshould fix your /etc/fstab file as soon as you can.\n"
#~ msgstr ""
#~ "WAARSCHUWING: /etc/fstab bevat geen zesde veld (een fsck-volgnummer).\n"
#~ "    Er wordt nu omheengewerkt, maar u zou dit veld bij\n"
#~ "    de eerstvolgende gelegenheid dienen toe te voegen.\n"

#~ msgid "couldn't open %s"
#~ msgstr "kan %s niet openen"

#~ msgid "Cannot open /dev/port"
#~ msgstr "Kan /dev/port niet openen"

#~ msgid "failed to parse epoch"
#~ msgstr "ontleden van tijdperkwaarde is mislukt"

#~ msgid ""
#~ "You have specified multiple functions.\n"
#~ "You can only perform one function at a time."
#~ msgstr ""
#~ "U hebt verschillende functies aangegeven.\n"
#~ "Per aanroep kan slechts één functie worden gebruikt."

#~ msgid "The --utc and --localtime options are mutually exclusive.  You specified both."
#~ msgstr "De opties '--utc' en '--localtime' gaan niet samen."

#~ msgid "The --adjust and --noadjfile options are mutually exclusive.  You specified both."
#~ msgstr "De opties '--adjust' en '--noadjfile' gaan niet samen."

#~ msgid "The --adjfile and --noadjfile options are mutually exclusive.  You specified both."
#~ msgstr "De opties '--adjfile' en '--noadjfile' gaan niet samen."

#~ msgid "Open of %s failed"
#~ msgstr "Openen van %s is mislukt"

#~ msgid "Failed to open %s for reading, exiting."
#~ msgstr "Kan %s niet openen om te lezen -- gestopt"

#~ msgid "cannot lock group file"
#~ msgstr "kan groepsbestand niet vergrendelen"

#~ msgid "the %s file is busy (%s present)"
#~ msgstr "het bestand %s is in gebruik (%s is aanwezig)"

#~ msgid "Usage: %s LABEL=<label>|UUID=<uuid>\n"
#~ msgstr "Gebruik:  %s LABEL=<label>|UUID=<uuid>\n"

#~ msgid "failed to parse sigval"
#~ msgstr "ontleden van signaalwaarde is mislukt"

#~ msgid "port `%ld' out of range"
#~ msgstr "poort '%ld' valt buiten bereik"

#~ msgid "could not stat '%s'"
#~ msgstr "kan status van '%s' niet opvragen"

#~ msgid "invalid offset value '%s' specified"
#~ msgstr "ongeldige plaatswaarde '%s' gegeven"

#~ msgid "warning: failed to read mtab"
#~ msgstr "waarschuwing: lezen van 'mtab' is mislukt"

#~ msgid "failed to parse class data"
#~ msgstr "ontleden van klassedata (bij '-n') is mislukt"

#~ msgid "configure, deconfigure, disable, dispatch, enable and rescan are mutually exclusive"
#~ msgstr "'configure', 'deconfigure', 'disable', 'enable', 'dispatch' en 'rescan' gaan niet samen"

#~ msgid "cannot stat: %s"
#~ msgstr "kan status van %s niet opvragen"

#~ msgid "clear, read-clear, console-level, console-on, and console-off options are mutually exclusive"
#~ msgstr ""
#~ "geen van de opties 'clear', 'read-clear', 'console-level',\n"
#~ "'console-on' en 'console-off' gaat samen met een andere"

#~ msgid "failed to parse buffer size"
#~ msgstr "ontleden van buffergrootte is mislukt"

#~ msgid "%s: fstat failed"
#~ msgstr "%s: fstat() is mislukt"

#~ msgid "invalid speed"
#~ msgstr "ongeldige snelheid"

#~ msgid "invalid offset '%s' specified"
#~ msgstr "ongeldige positie '%s' opgegeven"

#~ msgid "invalid size '%s' specified"
#~ msgstr "ongeldige grootte '%s' opgegeven"

#~ msgid "extended and parsable formats are mutually exclusive"
#~ msgstr "uitgebreide en ontleedbare opmaken gaan niet samen"

#~ msgid "--all, --online and --offline options are mutually exclusive"
#~ msgstr "opties '--all', '--online', en '--offline' gaan niet samen"

#~ msgid "only one <source> may be specified"
#~ msgstr "er mag slechts één <bron> gegeven worden"

#~ msgid "failed to allocate source buffer"
#~ msgstr "reserveren van bronbuffer is mislukt"

#~ msgid "only use one PID at a time"
#~ msgstr "u kunt slechts één PID tegelijk gebruiken"

#~ msgid "cannot parse PID"
#~ msgstr "ontleden van PID is mislukt"

#~ msgid "failed to parse seconds value"
#~ msgstr "ontleden van secondenwaarde is mislukt"

#~ msgid "failed to parse time_t value"
#~ msgstr "ontleden van tijdstipwaarde is mislukt"

#~ msgid "'%s' is unsupported program name (must be 'swapon' or 'swapoff')."
#~ msgstr "'%s' is niet-toegestane programmanaam (moet 'swapon' of 'swapoff' zijn)"

#~ msgid "failed to stat directory"
#~ msgstr "kan status van map niet opvragen"

#~ msgid "failed to stat directory %s"
#~ msgstr "kan status van map %s niet opvragen"

#~ msgid "cannot open timing file %s"
#~ msgstr "kan timingsbestand '%s' niet openen"

#~ msgid "argument %lu is too large"
#~ msgstr "argument %lu is te groot"

#~ msgid "terminal environment COLUMNS failed"
#~ msgstr "kan omgevingsvariabele COLUMNS niet verkrijgen"

#~ msgid "bad columns width value"
#~ msgstr "ongeldige waarde voor kolombreedte"

#~ msgid "-%c positive integer expected as an argument"
#~ msgstr "optie '-%c' verwacht een positief geheel getal als argument"

#~ msgid "bad length value"
#~ msgstr "ongeldige waarde voor te_interpreteren_aantal"

#~ msgid "bad skip value"
#~ msgstr "ongeldige waarde voor over_te_slaan_aantal"

#~ msgid "%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n"
#~ msgstr ""
#~ "%s: Gebruik:  %s [-aantal_regels_per_pagina] [-p te_gebruiken_prompt]\n"
#~ "                 [-cefnrs] [+regelnummer] [+/patroon/] [bestand ...]\n"

#~ msgid "Cannot open "
#~ msgstr "Kan deze niet openen: "

#~ msgid "cannot open \"%s\" for read"
#~ msgstr "kan '%s' niet openen voor lezen"

#~ msgid "cannot stat \"%s\""
#~ msgstr "kan status van '%s' niet opvragen"

#~ msgid "   d   delete a BSD partition"
#~ msgstr "   d      een BSD-partitie verwijderen"

#~ msgid "   n   add a new BSD partition"
#~ msgstr "   n      een nieuwe BSD-partitie toevoegen"

#~ msgid "   t   change a partition's filesystem id"
#~ msgstr "   t      bestandssysteem-ID van partitie wijzigen"

#~ msgid "   u   change units (cylinders/sectors)"
#~ msgstr "   u      gebruikte eenheid wijzigen (cilinders/sectoren)"

#~ msgid ""
#~ "Building a new DOS disklabel with disk identifier 0x%08x.\n"
#~ "Changes will remain in memory only, until you decide to write them.\n"
#~ "After that, of course, the previous content won't be recoverable.\n"
#~ msgstr ""
#~ "Er wordt een nieuwe DOS-partitietabel aangemaakt met schijf-ID 0x%08x.\n"
#~ "Wijzigingen vinden enkel en alleen in het geheugen plaats, totdat u besluit ze\n"
#~ "weg te schrijven.  Daarna is de oude inhoud uiteraard niet meer herstelbaar.\n"

#~ msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n"
#~ msgstr "Apparaat bevat geen geldig DOS-, Sun-, SGI- of OSF-schijflabel.\n"

#~ msgid "Internal error\n"
#~ msgstr "**Interne programmafout**\n"

#~ msgid "\tSorry, no experts menu for SGI partition tables available.\n"
#~ msgstr "  Sorry, het expertsmenu is niet beschikbaar voor SGI-partitietabellen.\n"

#~ msgid "Do You know, You got a partition overlap on the disk?\n"
#~ msgstr "Weet u dat u een partitieoverlap hebt op de schijf?\n"

#~ msgid ""
#~ "Building a new SGI disklabel. Changes will remain in memory only,\n"
#~ "until you decide to write them. After that, of course, the previous\n"
#~ "content will be unrecoverably lost.\n"
#~ msgstr ""
#~ "Er wordt een nieuw SGI-schijflabel gemaakt.  Wijzigingen vinden enkel\n"
#~ "en alleen in het geheugen plaats, totdat u besluit ze weg te schrijven.\n"
#~ "Daarna is de oude inhoud uiteraard niet meer herstelbaar.\n"

#~ msgid "out of memory - giving up\n"
#~ msgstr "onvoldoende geheugen beschikbaar -- gestopt\n"

#~ msgid "%-20s: failed: %s\n"
#~ msgstr "%-20s: mislukt: %s\n"

#~ msgid "%-20s: failed\n"
#~ msgstr "%-20s: mislukt\n"

#~ msgid "login: memory low, login may fail\n"
#~ msgstr "login: er is weinig vrij geheugen, inloggen kan mislukken\n"

#~ msgid "can't malloc for ttyclass"
#~ msgstr "malloc() voor ttyclass is mislukt"

#~ msgid "can't malloc for grplist"
#~ msgstr "malloc() voor grplist is mislukt"

#~ msgid "Login on %s from %s denied.\n"
#~ msgstr "Inloggen op %s vanaf %s is geweigerd.\n"

#~ msgid "Usage: %s [ -f full-name ] [ -o office ] "
#~ msgstr "Gebruik:  %s [-f volledige_naam] [-o kantoor] "

#~ msgid "%s: PAM failure, aborting: %s"
#~ msgstr "%s: PAM-fout -- gestopt: %s"

#~ msgid ""
#~ "Usage: %1$s [-s shell] [username]\n"
#~ "   or: %1$s (--list-shells | --help | --version)\n"
#~ msgstr ""
#~ "Gebruik:  %1$s [-s shell] [gebruikersnaam]\n"
#~ "     of:  %1$s (--list-shells | --help | --version)\n"

#~ msgid "%s: can only change local entries."
#~ msgstr "%s: kan alleen lokale items wijzigen"

#~ msgid "%s: can't set default context for /etc/passwd"
#~ msgstr "%s: kan de standaardcontext voor /etc/passwd niet instellen"

#~ msgid "setpwnam failed"
#~ msgstr "setpwnam() is mislukt"

#~ msgid "%s: Use -l option to see list.\n"
#~ msgstr "%s: Gebruik optie '-l' om de lijst te zien\n"

#~ msgid "Use %s -l to see list.\n"
#~ msgstr "Gebruik '%s -l' om de lijst te zien.\n"

#~ msgid "usage: login [-fp] [username]\n"
#~ msgstr "Gebruik:  login [-fp] [gebruikersnaam]\n"

#~ msgid "Illegal username"
#~ msgstr "Ongeldige gebruikersnaam"

#~ msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
#~ msgstr "INLOGGEN DOOR %s VANAF %s IS GEWEIGERD OP TTY %s"

#~ msgid "LOGIN %s REFUSED ON TTY %s"
#~ msgstr "INLOGGEN DOOR %s IS GEWEIGERD OP TTY %s"

#~ msgid "Login incorrect\n"
#~ msgstr "Inloggegevens onjuist\n"

#~ msgid "change terminal owner failed"
#~ msgstr "wijzigen van terminaleigenaar is mislukt"

#~ msgid "failure forking"
#~ msgstr "kan geen nieuw proces starten"

#~ msgid "%s login: "
#~ msgstr "%s inlognaam: "

#~ msgid "NAME too long"
#~ msgstr "NAAM is te lang"

#~ msgid "login name much too long."
#~ msgstr "inlognaam is veel te lang"

#~ msgid "login names may not start with '-'."
#~ msgstr "inlognamen mogen niet beginnen met '-'"

#~ msgid "EXCESSIVE linefeeds"
#~ msgstr "EXCESSIEF aantal witregels"

#~ msgid "too many bare linefeeds."
#~ msgstr "te veel witregels"

#~ msgid "LOGIN FAILURE FROM %s, %s"
#~ msgstr "INLOGGEN IS MISLUKT VANAF %s -- %s"

#~ msgid "LOGIN FAILURE ON %s, %s"
#~ msgstr "INLOGGEN IS MISLUKT OP %s -- %s"

#~ msgid "%d LOGIN FAILURES FROM %s, %s"
#~ msgstr "%d INLOGMISLUKKINGEN VANAF %s -- %s"

#~ msgid "%d LOGIN FAILURES ON %s, %s"
#~ msgstr "%d INLOGMISLUKKINGEN OP %s --  %s"

#~ msgid "%s: the group file is busy.\n"
#~ msgstr "%s: het bestand 'group' is in gebruik\n"

#~ msgid "%s: can't unlock %s: %s (your changes are still in %s)\n"
#~ msgstr "%s: kan %s niet ontgrendelen: %s (uw wijzigingen staan nog in %s)\n"

#~ msgid "calloc failed"
#~ msgstr "calloc() is mislukt"

#~ msgid "WARNING: %s: appears to contain '%s' partition table"
#~ msgstr "WAARSCHUWING: %s schijnt een '%s'-partitietabel te bevatten"

#~ msgid "no magic string found at offset 0x%jx -- ignored"
#~ msgstr "geen magische tekenreeks gevonden op positie 0x%jx -- genegeerd"

#~ msgid "%s: write failed"
#~ msgstr "%s: schrijven is mislukt"

#~ msgid "%s: /dev directory does not exist."
#~ msgstr "%s: map '/dev' bestaat niet."

#~ msgid "loop: can't set capacity on device %s: %s\n"
#~ msgstr "loop: kan grootte van apparaat %s niet instellen: %s\n"

#~ msgid ", offset %<PRIu64>"
#~ msgstr ", beginpunt %<PRIu64>"

#~ msgid ", encryption type %d\n"
#~ msgstr ", versleutelingssoort %d\n"

#~ msgid "loop: can't get info on device %s: %s\n"
#~ msgstr "loop: kan geen informatie verkrijgen over apparaat %s: %s\n"

#~ msgid "loop: can't open device %s: %s\n"
#~ msgstr "loop: kan apparaat %s niet openen: %s\n"

#~ msgid "%s: no permission to look at /dev/loop%s<N>"
#~ msgstr "%s: geen toegangsrechten tot /dev/loop%s<N>"

#~ msgid ""
#~ "%s: Could not find any loop device. Maybe this kernel does not know\n"
#~ "       about the loop device? (If so, recompile or `modprobe loop'.)"
#~ msgstr ""
#~ "%s: Kan geen lus-apparaat vinden.  Misschien kent deze kernel geen\n"
#~ "        lus-apparaten?  (Dan moet u de kernel opnieuw compileren,\n"
#~ "        of misschien een 'modprobe loop' doen?)"

#~ msgid "Out of memory while reading passphrase"
#~ msgstr "Onvoldoende geheugen beschikbaar tijdens lezen van wachtwoord"

#~ msgid "warning: %s is already associated with %s\n"
#~ msgstr "waarschuwing: %s is al gerelateerd aan %s\n"

#~ msgid "warning: %s: is write-protected, using read-only.\n"
#~ msgstr "waarschuwing: %s is schrijfbeveiligd en wordt als alleen-lezen aangekoppeld.\n"

#~ msgid "ioctl LOOP_SET_FD failed: %s\n"
#~ msgstr "ioctl(LOOP_SET_FD) is mislukt: %s\n"

#~ msgid "set_loop(%s,%s,%llu,%llu): success\n"
#~ msgstr "set_loop(%s,%s,%llu,%llu) is gelukt\n"

#~ msgid "del_loop(%s): success\n"
#~ msgstr "lus-apparaat %s is uitgeschakeld\n"

#~ msgid "loop: can't delete device %s: %s\n"
#~ msgstr "kan lus-apparaat %s niet uitschakelen: %s\n"

#~ msgid "This mount was compiled without loop support. Please recompile.\n"
#~ msgstr ""
#~ "Deze versie van 'mount' is gecompileerd zonder lus-ondersteuning.\n"
#~ "Hercompilatie is nodig.\n"

#~ msgid "stolen loop=%s...trying again\n"
#~ msgstr "afgepakt lus-apparaat=%s; ... nieuwe poging\n"

#~ msgid "No loop support was available at compile time. Please recompile.\n"
#~ msgstr "Bij het compileren was geen lus-ondersteuning beschikbaar.  Hercompilatie is nodig.\n"

#~ msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n"
#~ msgstr ""
#~ "Gebruik:  %s [-q [-i interval]] ([-s waarde | -S waarde])\n"
#~ "                 ([-t waarde | -T waarde]) [-g|-G] bestand...\n"

#~ msgid "Can't open %s: %s\n"
#~ msgstr "Kan %s niet openen: %s\n"

#~ msgid "%s: cannot open lock file %s: %s\n"
#~ msgstr "%s: kan vergrendelingsbestand %s niet openen: %s\n"

#~ msgid "%s: bad number: %s\n"
#~ msgstr "%s: ongeldig getal: %s\n"

#~ msgid "%s: fork failed: %s\n"
#~ msgstr "%s: fork() is mislukt: %s\n"

#~ msgid ""
#~ " -M <size>     create shared memory segment of size <size>\n"
#~ " -S <nsems>    create semaphore array with <nsems> elements\n"
#~ " -Q            create message queue\n"
#~ " -p <mode>     permission for the resource (default is 0644)\n"
#~ msgstr ""
#~ "  -M <grootte>   gedeeld geheugensegment aanmaken met deze grootte\n"
#~ "  -S <aantal>    semafoorarray aanmaken met <aantal> elementen\n"
#~ "  -Q             berichtenwachtrij aanmaken\n"
#~ "  -p <modus>     deze toegangsrechten toekennen (standaard 0644)\n"

#~ msgid "cannot remove id %s (%s)\n"
#~ msgstr "kan ID %s niet verwijderen (%s)\n"

#~ msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
#~ msgstr "Afgeraden gebruik:  %s [shm | msg | sem] ID...\n"

#~ msgid ""
#~ "usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
#~ "          [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
#~ msgstr ""
#~ "Gebruik:  %s [ [-q msq-ID] [-m shm-ID] [-s sem-ID]\n"
#~ "                  [-Q msq-sleutel] [-M shm-sleutel] [-S sem-sleutel] ... ]\n"

#~ msgid "unknown error in key"
#~ msgstr "onbekende fout in sleutel"

#~ msgid "unknown error in id"
#~ msgstr "onbekende fout in ID"

#~ msgid ""
#~ "Usage: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
#~ "       %1$s [-s|-m|-q] -i id\n"
#~ "       %1$s -h for help\n"
#~ msgstr ""
#~ "Gebruik: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
#~ "         %1$s [-s|-m|-q] -i ID\n"
#~ "         %1$s -h    (voor hulp)\n"

#~ msgid ""
#~ "Resource options:\n"
#~ "    -m      shared memory segments\n"
#~ "    -q      message queues\n"
#~ "    -s      semaphores\n"
#~ "    -a      all (default)\n"
#~ msgstr ""
#~ "Hulpbronopties:\n"
#~ "    -m      gedeelde geheugensegmenten\n"
#~ "    -q      berichtwachtrijen\n"
#~ "    -s      semaforen\n"
#~ "    -a      alle (is standaard)\n"

#~ msgid ""
#~ "Output format:\n"
#~ "    -t      time\n"
#~ "    -p      pid\n"
#~ "    -c      creator\n"
#~ "    -l      limits\n"
#~ "    -u      summary\n"
#~ msgstr ""
#~ "Uitvoeropmaak:\n"
#~ "    -t      tijd\n"
#~ "    -p      PID\n"
#~ "    -c      aanmaker\n"
#~ "    -l      grenzen\n"
#~ "    -u      samenvatting\n"

#~ msgid " %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
#~ msgstr ""
#~ "  %s [-dhV78neo12] [-s <snelheid>] [-i [-]<invoervlag>]\n"
#~ "                  <lijnprotocol> <apparaat>\n"

#~ msgid "ldattach from %s\n"
#~ msgstr "'ldattach' uit %s\n"

#~ msgid ""
#~ " -p, --parse <list>  print out a parsable instead of a readable format\n"
#~ " -s, --sysroot <dir> use directory DIR as system root\n"
#~ " -x, --hex           print hexadecimal masks rather than lists of CPUs\n"
#~ msgstr ""
#~ "Toont informatie over de processorarchitectuur.\n"
#~ "\n"
#~ "  -p, --parse[=<lijst>]  ontleedbare i.p.v. leesbare uitvoer produceren\n"
#~ "  -s, --sysroot <map>    deze map als hoofdmap gebruiken\n"
#~ "  -x, --hex              hexadecimaal masker tonen in plaats van lijst\n"

#~ msgid ""
#~ "%s: Usage: \"%s [options]\n"
#~ "\t -m <mapfile>  (defaults: \"%s\" and\n"
#~ "\t\t\t\t  \"%s\")\n"
#~ "\t -p <pro-file> (default: \"%s\")\n"
#~ "\t -M <mult>     set the profiling multiplier to <mult>\n"
#~ "\t -i            print only info about the sampling step\n"
#~ "\t -v            print verbose data\n"
#~ "\t -a            print all symbols, even if count is 0\n"
#~ "\t -b            print individual histogram-bin counts\n"
#~ "\t -s            print individual counters within functions\n"
#~ "\t -r            reset all the counters (root only)\n"
#~ "\t -n            disable byte order auto-detection\n"
#~ "\t -V            print version and exit\n"
#~ msgstr ""
#~ "%s: Gebruik:  %s [opties]\n"
#~ "\n"
#~ "  -M <maal>  profileervermenigvuldiger op <maal> instellen\n"
#~ "  -m <symbolenbestand>   (standaard: %s en\n"
#~ "                                     %s)\n"
#~ "  -p <profileerbestand>  (standaard: %s)\n"
#~ "  -a         alle symbolen tonen, ook als het aantal nul is\n"
#~ "  -b         individuele histogrambalk-aantallen weergeven\n"
#~ "  -i         alleen info over bemonsteringsstap tonen\n"
#~ "  -n         autodetectie van bytevolgorde uitzetten\n"
#~ "  -r         alle tellers opnieuw op nul instellen (alleen door root)\n"
#~ "  -s         individuele tellers in functies weergeven\n"
#~ "  -v         gedetailleerde uitvoer produceren\n"

#~ msgid "readprofile: error writing %s: %s\n"
#~ msgstr "readprofile: fout bij schrijven van %s: %s\n"

#~ msgid "usage: %s program [arg ...]\n"
#~ msgstr "Gebruik:  %s <programma> [<argument>...]\n"

#~ msgid ""
#~ "Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n"
#~ "          -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
#~ "          -T [on|off] ]\n"
#~ msgstr ""
#~ "Gebruik:  %s <apparaat> [ -c <aantal_pogingen_alvorens_te_slapen> |\n"
#~ "          -t <slaaptijd> | -w <strobe_wachttijd> | -i <IRQ> | -a [on|off] |\n"
#~ "          -C [on|off] | -o [on|off] | -q [on|off] | -s | -T [on|off] ]\n"

#~ msgid "%s: bad value\n"
#~ msgstr "%s: ongeldige waarde\n"

#~ msgid "Sorry You may change the Tag of non-empty partitions.\n"
#~ msgstr "Sorry, alleen van niet-lege partities kunt u de soort wijzigen.\n"

#~ msgid "Warning: partition %s "
#~ msgstr "Waarschuwing: partitie %s "

#~ msgid "Warning: partitions %s "
#~ msgstr "Waarschuwing: partities %s "

#~ msgid "and %s overlap\n"
#~ msgstr "en %s overlappen\n"

#~ msgid ""
#~ "Usage:\n"
#~ "  %s [options] device [...]\n"
#~ msgstr "Gebruik:  %s [opties] apparaat...\n"

#~ msgid "Device is something like /dev/hda or /dev/sda\n"
#~ msgstr "  (apparaat is zoiets als /dev/hda of /dev/sda)\n"

#, fuzzy
#~ msgid ""
#~ "Options:\n"
#~ "  -s, --show-size         list size of a partition\n"
#~ "  -c, --id                change or print partition Id\n"
#~ "      --change-id         change Id\n"
#~ "      --print-id          print Id\n"
#~ "  -l, --list              list partitions of each device\n"
#~ "  -d, --dump              idem, but in a format suitable for later input\n"
#~ "  -i, --increment         number cylinders etc. from 1 instead of from 0\n"
#~ "  -u, --unit=[SBCM]       units in sectors, blocks, cylinders or MB\n"
#~ "  -1, --one-only          reserved option that does nothing currently\n"
#~ "  -T, --list-types        list the known partition types\n"
#~ "  -D, --DOS               for DOS-compatibility: waste a little space\n"
#~ "  -E, --DOS-extended      DOS extended partition compatibility\n"
#~ "  -R, --re-read           make kernel reread partition table\n"
#~ "  -N=NUM                  change only the partition with number NUM\n"
#~ "  -n                      do not actually write to disk\n"
#~ "  -O FILE                 save the sectors that will be overwritten to file\n"
#~ "  -I FILE                 restore sectors from file\n"
#~ "  -V, --verify            check that listed partition is reasonable\n"
#~ msgstr ""
#~ "Opties:\n"
#~ "  -s, --show-size         grootte van een partitie tonen\n"
#~ "  -c, --id                partitie-ID tonen of wijzigen\n"
#~ "      --change-id         ID wijzigen\n"
#~ "      --print-id          ID tonen\n"
#~ "  -l, --list              partities van elk gegeven apparaat tonen\n"
#~ "  -d, --dump              idem, maar in een vorm die geschikt is als invoer\n"
#~ "  -i, --increment         cilinders nummeren vanaf 1 in plaats van vanaf 0\n"
#~ "  -u, --unit=[SBCM]       als eenheid sectoren, blokken, cilinders, MB gebruiken\n"
#~ "  -1, --one-only          (gereserveerde optie; doet momenteel niets)\n"
#~ "  -T, --list-types        de mogelijke partitiesoorten tonen\n"
#~ "  -D, --DOS               DOS-compatibel zijn (een beetje ruimte verspillen)\n"
#~ "  -E, --DOS-extended      DOS-extended-compatibel zijn\n"
#~ "  -R, --re-read           de partitietabel door de kernel laten herinlezen\n"
#~ "  -N=NUMMER               alleen de partitie met dit nummer wijzigen\n"
#~ "  -n                      niet echt naar schijf schrijven, maar doen alsof\n"
#~ "  -O BESTAND              sectoren die overschreven worden opslaan in bestand\n"
#~ "  -I BESTAND              overschreven sectoren herstellen vanuit dit bestand\n"
#~ "  -V, --verify            controleren dat de partities consistent zijn\n"

#~ msgid ""
#~ "Dangerous options:\n"
#~ "  -f, --force             disable all consistency checking\n"
#~ "  -g, --show-geometry     print the kernel's idea of the geometry\n"
#~ "  -A, --activate[=device] activate bootable flag\n"
#~ "  -G, --show-pt-geometry  print geometry guessed from the partition table\n"
#~ "  -U, --unhide[=device]   set partition unhidden\n"
#~ "      --no-reread         skip partition re-read at boot\n"
#~ "  -x, --show-extended     also list extended partitions on output\n"
#~ "                          or expect descriptors for them on input\n"
#~ "      --leave-last        do not allocate the last cylinder\n"
#~ "      --IBM               same as --leave-last\n"
#~ "      --in-order          partitions are in order\n"
#~ "      --not-in-order      partitions are not in order\n"
#~ "      --inside-order      all logicals inside outermost extended\n"
#~ "      --not-inside-order  not all logicals inside outermost extended\n"
#~ "      --nested            every partition is disjoint from all others\n"
#~ "      --chained           like nested, but extended partitions may lie outside\n"
#~ "      --onesector         partitions are mutually disjoint\n"
#~ "  -L, --Linux             do not complain about things irrelevant for Linux\n"
#~ "  -q, --quiet             suppress warning messages\n"
#~ "\n"
#~ "  Override the detected geometry using:\n"
#~ "  -C, --cylinders=NUM     set the number of cylinders to use\n"
#~ "  -H, --heads=NUM         set the number of heads to use\n"
#~ "  -S, --sectors=NUM       set the number of sectors to use\n"
#~ msgstr ""
#~ "Gevaarlijke opties:\n"
#~ "  -f, --force             alle consistentiecontroles uitschakelen\n"
#~ "  -g, --show-geometry     de geometrie tonen die door de kernel aangegeven wordt\n"
#~ "  -G, --show-pt-geometry  de geometrie tonen die uit de partitietabel blijkt\n"
#~ "  -A, --activate[=APPRT]  de 'opstartbaar'-vlag inschakelen\n"
#~ "  -U, --unhide[=APPRT]    partitie als onverborgen markeren\n"
#~ "      --no-reread         voor herpartitioneren de partitietabel niet herlezen\n"
#~ "  -x, --show-extended     uitgebreide partities volledig weergeven in uitvoer,\n"
#~ "                            of beschrijvers ervan verwachten in invoer\n"
#~ "      --leave-last        de laatste cilinder niet toewijzen\n"
#~ "      --IBM               hetzelfde als '--leave-last'\n"
#~ "      --in-order          de partities zijn op volgorde\n"
#~ "      --not-in-order      de partities zijn niet op volgorde\n"
#~ "      --inside-outer      alle logische vallen binnen de buitenste uitgebreide\n"
#~ "      --not-inside-outer  niet alle logische binnen de buitenste uitgebreide\n"
#~ "      --nested            elke partitie valt binnen een uitgebreide partitie\n"
#~ "      --chained           elke logische partitie valt binnen een uitgebreide\n"
#~ "      --onesector         geen enkele partitie valt binnen een andere\n"
#~ "  -L, --Linux             niet klagen over dingen die irrelevant zijn voor Linux\n"
#~ "  -q, --quiet             waarschuwingen onderdrukken\n"
#~ "\n"
#~ "U kunt een andere dan de gevonden geometrie afdwingen met:\n"
#~ "  -C, --cylinders=GETAL   het aantal te gebruiken cilinders\n"
#~ "  -H, --heads=GETAL       het aantal te gebruiken koppen\n"
#~ "  -S, --sectors=GETAL     het aantal te gebruiken sectoren\n"

#~ msgid "success"
#~ msgstr "gelukt"

#~ msgid ""
#~ "Usage:\n"
#~ " %1$s -a [-e] [-v] [-f]             enable all swaps from /etc/fstab\n"
#~ " %1$s [-p priority] [-d] [-v] [-f] <special>  enable given swap\n"
#~ " %1$s -s                            display swap usage summary\n"
#~ msgstr ""
#~ "Gebruik:\n"
#~ "  %1$s -a [-e] [-v] [-f]                 alle wisselgeheugens inschakelen die\n"
#~ "                                           vermeld staan in /etc/fstab\n"
#~ "  %1$s [-p PRIORITEIT] [-d] [-v] [-f] NAAM    dit wisselgeheugen inschakelen\n"
#~ "  %1$s -s                                gebruikssamenvatting tonen\n"

#~ msgid ""
#~ "Usage:\n"
#~ " %1$s -a [-v]                      disable all swaps\n"
#~ " %1$s [-v] <special>               disable given swap\n"
#~ msgstr ""
#~ "Gebruik:\n"
#~ "  %1$s -a [-v]      alle wisselgeheugens uitschakelen\n"
#~ "  %1$s [-v] NAAM    dit wisselgeheugen uitschakelen\n"

#~ msgid ""
#~ "Usage: %s [options] <filename>\n"
#~ "\n"
#~ "Options:\n"
#~ msgstr ""
#~ "Gebruik:  %s [opties] <bestandsnaam>\n"
#~ "\n"
#~ "Opties:\n"

#~ msgid "Usage: %s [options]\n"
#~ msgstr "Gebruik:  %s [opties]\n"

#~ msgid ""
#~ "Usage: %s [options]\n"
#~ "\n"
#~ "Options:\n"
#~ msgstr ""
#~ "Gebruik:  %s [opties]\n"
#~ "\n"
#~ "Opties:\n"

#~ msgid "  %s --report [devices]\n"
#~ msgstr "  %s --report [apparaten]\n"

#~ msgid "  %s [-v|-q] commands devices\n"
#~ msgstr "  %s [-v|-q] opdrachten apparaten\n"

#~ msgid "%s: cannot open %s\n"
#~ msgstr "%s: kan %s niet openen\n"

#~ msgid "usage: %s [ -n ] device\n"
#~ msgstr "Gebruik:  %s [ -n ] apparaat\n"

#~ msgid "malloc failed"
#~ msgstr "malloc() is mislukt"

#~ msgid "%s: option parse error\n"
#~ msgstr "%s: optie-ontledingsfout\n"

#~ msgid "Usage: %s [-x] [-d <num>] iso9660-image\n"
#~ msgstr "Gebruik:  %s [-x] [-d <getal>] iso9660-afbeelding\n"

#~ msgid ""
#~ "Usage: %s [-v] [-N nr-of-inodes] [-V volume-name]\n"
#~ "       [-F fsname] device [block-count]\n"
#~ msgstr ""
#~ "Gebruik:  %s [-v] [-N aantal_inodes] [-V volumennaam]\n"
#~ "          [-F bestandssysteemnaam] apparaat [aantal_blokken]\n"

#~ msgid "cannot determine sector size for %s"
#~ msgstr "kan sectorgrootte voor %s niet achterhalen"

#~ msgid "Usage: %s [-c] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n"
#~ msgstr "Gebruik:  %s [-c] [-ppaginagrootte] [-L label] [-U UUID]  /dev/naam  [blokken]\n"

#~ msgid "Out of memory"
#~ msgstr "Onvoldoende geheugen beschikbaar"

#~ msgid ""
#~ "Usage:\n"
#~ "  %s "
#~ msgstr ""
#~ "Gebruik:\n"
#~ "  %s "

#~ msgid "Menu without direction. Defaulting to horizontal."
#~ msgstr "Menu zonder richting.  Standaard wordt gebruikt: horizontaal."

#~ msgid "You must delete some partition and add an extended partition first\n"
#~ msgstr ""
#~ "U dient eerst een partitie te verwijderen\n"
#~ "en een uitgebreide partitie toe te voegen.\n"

#~ msgid ""
#~ "Command action\n"
#~ "   %s\n"
#~ "   p   primary partition (1-4)\n"
#~ msgstr ""
#~ "Opdracht  Actie\n"
#~ "   %s\n"
#~ "   p      primaire partitie (1-4)\n"

#~ msgid "    -s [or --show-size]: list size of a partition"
#~ msgstr "  -s, --show-size     partitiegroottes tonen"

#~ msgid "    -d [or --dump]:      idem, but in a format suitable for later input"
#~ msgstr "  -d, --dump          idem, maar in een opmaak geschikt voor latere invoer"

#~ msgid "    -i [or --increment]: number cylinders etc. from 1 instead of from 0"
#~ msgstr "  -i, --increment     cilinders/sectoren/... nummeren vanaf 1 in plaats vanaf 0"

#~ msgid "    -uS, -uB, -uC, -uM:  accept/report in units of sectors/blocks/cylinders/MB"
#~ msgstr "  -uS, -uB, -uC, -uM  invoeren/weergeven in sectoren/blokken/cilinders/MB"

#~ msgid "    -D [or --DOS]:       for DOS-compatibility: waste a little space"
#~ msgstr "  -D, --DOS           een beetje ruimte verspillen (voor DOS-compatibiliteit)"

#~ msgid "    -R [or --re-read]:   make kernel reread partition table"
#~ msgstr "  -R, --re-read       de partitietabel opnieuw in laten lezen door de kernel"

#~ msgid "    -O file :            save the sectors that will be overwritten to file"
#~ msgstr "  -O bestand          de te overschrijven sectoren opslaan in dit bestand"

#~ msgid "    -I file :            restore these sectors again"
#~ msgstr "  -I bestand          deze opgeslagen sectoren herstellen"

#~ msgid "    -g [or --show-geometry]: print the kernel's idea of the geometry"
#~ msgstr "  -g, --show-geometry     de kernelvisie van de geometrie weergeven"

#~ msgid "    -L  [or --Linux]:      do not complain about things irrelevant for Linux"
#~ msgstr "  -L, --Linux         niet klagen over dingen die niet relevant zijn voor Linux"

#~ msgid "    You can override the detected geometry using:"
#~ msgstr "U kunt een andere dan de gevonden geometrie afdwingen met:"

#~ msgid "    -f  [or --force]:      do what I say, even if it is stupid"
#~ msgstr "  -f, --force         precies doen als gegeven, *ook* als het dom is"

#~ msgid "Couldn't allocate memory for filesystem types\n"
#~ msgstr "onvoldoende geheugen beschikbaar voor bestandssysteemsoorten\n"

#~ msgid "Usage: fsck [-AMNPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]\n"
#~ msgstr ""
#~ "Gebruik: fsck [-AMNPRTV] [-C [bestandsdescriptor]] [-t bestandssyteemsoort]\n"
#~ "              [bestandssysteemopties] [bestandssysteem...]\n"

#~ msgid "Couldn't open %s: %s\n"
#~ msgstr "Kan %s niet openen: %s\n"

#~ msgid "fsck from %s\n"
#~ msgstr "'fsck' uit %s\n"

#~ msgid "%s: Unable to allocate memory for fsck_path\n"
#~ msgstr "%s: Onvoldoende geheugen beschikbaar voor fsck_path()\n"

#~ msgid "Try `getopt --help' for more information.\n"
#~ msgstr "Probeer 'getopt --help' voor meer informatie.\n"

#~ msgid "Usage: getopt optstring parameters\n"
#~ msgstr "Gebruik:  getopt optiereeks parameters\n"

#~ msgid "       getopt [options] [--] optstring parameters\n"
#~ msgstr "          getopt [opties] [--] optiereeks parameters\n"

#~ msgid "getopt (enhanced) 1.1.4\n"
#~ msgstr "getopt (verbeterde) 1.1.4\n"

#~ msgid "(Expected: `UTC' or `LOCAL' or nothing.)\n"
#~ msgstr "(Verwacht: 'UTC' of 'LOCAL' of niets.)\n"

#~ msgid ""
#~ "hwclock - query and set the hardware clock (RTC)\n"
#~ "\n"
#~ "Usage: hwclock [function] [options...]\n"
#~ "\n"
#~ "Functions:\n"
#~ "  -r | --show         read hardware clock and print result\n"
#~ "       --set          set the rtc to the time given with --date\n"
#~ "  -s | --hctosys      set the system time from the hardware clock\n"
#~ "  -w | --systohc      set the hardware clock to the current system time\n"
#~ "       --systz        set the system time based on the current timezone\n"
#~ "       --adjust       adjust the rtc to account for systematic drift since\n"
#~ "                      the clock was last set or adjusted\n"
#~ "       --getepoch     print out the kernel's hardware clock epoch value\n"
#~ "       --setepoch     set the kernel's hardware clock epoch value to the \n"
#~ "                      value given with --epoch\n"
#~ "       --predict      predict rtc reading at time given with --date\n"
#~ "  -v | --version      print out the version of hwclock to stdout\n"
#~ "\n"
#~ "Options: \n"
#~ "  -u | --utc          the hardware clock is kept in UTC\n"
#~ "       --localtime    the hardware clock is kept in local time\n"
#~ "  -f | --rtc=path     special /dev/... file to use instead of default\n"
#~ "       --directisa    access the ISA bus directly instead of %s\n"
#~ "       --badyear      ignore rtc's year because the bios is broken\n"
#~ "       --date         specifies the time to which to set the hardware clock\n"
#~ "       --epoch=year   specifies the year which is the beginning of the \n"
#~ "                      hardware clock's epoch value\n"
#~ "       --noadjfile    do not access /etc/adjtime. Requires the use of\n"
#~ "                      either --utc or --localtime\n"
#~ "       --adjfile=path specifies the path to the adjust file (default is\n"
#~ "                      /etc/adjtime)\n"
#~ "       --test         do everything except actually updating the hardware\n"
#~ "                      clock or anything else\n"
#~ "  -D | --debug        debug mode\n"
#~ msgstr ""
#~ "hwclock - de hardwareklok (RTC) instellen of waarden weergeven\n"
#~ "\n"
#~ "Gebruik:  hwclock [functie] [opties...]\n"
#~ "\n"
#~ "Functies:\n"
#~ "  -r|--show        de hardwareklok lezen en het resultaat weergeven\n"
#~ "     --set         de hardwareklok instellen op de tijd gegeven met '--date'\n"
#~ "  -s|--hctosys     aan de hand van de hardwareklok de systeemklok instellen\n"
#~ "  -w|--systohc     aan de hand van de systeemklok de hardwareklok instellen\n"
#~ "     --systz       de systeemklok instellen aan de hand van de tijdzone\n"
#~ "     --adjust      de hardwareklok aanpassen ter compensatie van systematische\n"
#~ "                   verschuiving sinds de laatste instelling/aanpassing\n"
#~ "     --getepoch    tijdperkwaarde van de kernel tonen\n"
#~ "     --setepoch    tijdperkwaarde van de kernel instellen op de waarde\n"
#~ "                   gegeven met de optie '--epoch'\n"
#~ "     --predict     hardwarekloktijd voorspellen op moment gegeven met '--date'\n"
#~ "\n"
#~ "Opties: \n"
#~ "  -u|--utc         de hardwareklok bevat de gecoördineerde universele tijd\n"
#~ "     --localtime   de hardwareklok bevat de lokale tijd\n"
#~ "  -f|--rtc=BESTAND te gebruiken RTC-bestand in /dev/ in plaats van standaard\n"
#~ "     --directisa   de ISA-bus direct benaderen in plaats van via %s\n"
#~ "     --badyear     het jaartal van de hardwareklok negeren omdat de BIOS stuk is\n"
#~ "     --date=TIJD   de tijd waarop de hardwareklok moet worden ingesteld\n"
#~ "     --epoch=JAAR  het jaartal dat het tijdperkbegin voor de hardwareklok is\n"
#~ "     --noadjfile   /etc/adjtime niet gebruiken (met '--utc' of '--localtime')\n"
#~ "     --adjfile=BESTAND  te gebruiken verschuivingsregistratiebestand\n"
#~ "                        (standaard is /etc/adjtime)\n"
#~ "     --test        alles doen behalve daadwerkelijk iets veranderen\n"
#~ "  -D|--debug       debug-modus inschakelen\n"

#~ msgid "can't malloc initstring"
#~ msgstr "onvoldoende geheugen beschikbaar voor starttekenreeks"

#~ msgid ""
#~ "Usage: %s [-8hiLmsUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n"
#~ "or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n"
#~ msgstr ""
#~ "Gebruik:  %s [-8hiLmsUw] [-l inlogprogramma] [-t tijdslimiet] [-H inloghost]\n"
#~ "          [-I starttekenreeks]  baudrate,...  lijn  [terminalsoort]\n"
#~ "     of:  [-hiLmw] [-l inlogprogramma] [-t tijdslimiet] [-H inloghost]\n"
#~ "          [-I starttekenreeks]  lijn  baudrate,...  [terminalsoort]\n"

#~ msgid "Usage: %s [y | n]"
#~ msgstr "Gebruik:  %s [y|n]"

#~ msgid "%s: BAD ERROR"
#~ msgstr "%s: BEROERDE FOUTMELDING -- veel te lang"

#~ msgid "usage: %s [-n] [file]\n"
#~ msgstr "Gebruik:  %s [-n] [bestand]\n"

#~ msgid "can't read: %s"
#~ msgstr "kan %s niet lezen"

#~ msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n"
#~ msgstr ""
#~ "Gebruik:  logger [-isd] [-f bestand] [-p prioriteit] [-t tag]\n"
#~ "                 [-u socket] [bericht...]\n"

#~ msgid "usage: look [-dfa] [-t char] string [file]\n"
#~ msgstr "Gebruik:  look [-dfa] [-t teken] tekst [bestand]\n"

#~ msgid "out of memory?"
#~ msgstr "onvoldoende geheugen beschikbaar?"

#~ msgid "call: %s from to files...\n"
#~ msgstr "Gebruik:  %s van naar bestanden...\n"

#~ msgid "usage: script [-a] [-e] [-f] [-q] [-t] [file]\n"
#~ msgstr "Gebruik:  script [-a] [-e] [-f] [-q] [-t] [bestand]\n"

#~ msgid "%s: write error %d: %s\n"
#~ msgstr "%s: schrijffout %d: %s\n"

#~ msgid "%s: write error: %s\n"
#~ msgstr "%s: schrijffout: %s\n"

#~ msgid "Usage: %s [-d] [-p pidfile] [-s socketpath] [-T timeout]\n"
#~ msgstr "Gebruik:  %s [-d] [-p PID-bestand] [-s socket-pad] [-T tijslimiet]\n"

#~ msgid "       %s [-r|t] [-n num] [-s socketpath]\n"
#~ msgstr "          %s [-r|t] [-n nummer] [-s socket-pad]\n"

#~ msgid "Usage: %s [-r] [-t]\n"
#~ msgstr "Gebruik:  %s [-r] [-t]\n"

#~ msgid "whereis [ -sbmu ] [ -SBM dir ... -f ] name...\n"
#~ msgstr "Gebruik:  whereis [-bmsu] [-BMS map... -f] naam...\n"

#~ msgid "usage: write user [tty]\n"
#~ msgstr "Gebruik:  write gebruiker [tty]\n"

#~ msgid "mount: can't open %s: %s"
#~ msgstr "mount: kan %s niet openen: %s"

#~ msgid "unknown\n"
#~ msgstr "onbekend\n"

#~ msgid ""
#~ "ionice - sets or gets process io scheduling class and priority.\n"
#~ "\n"
#~ "Usage:\n"
#~ "  ionice [ options ] -p <pid> [<pid> ...]\n"
#~ "  ionice [ options ] <command> [<arg> ...]\n"
#~ "\n"
#~ "Options:\n"
#~ "  -n <classdata>      class data (0-7, lower being higher prio)\n"
#~ "  -c <class>          scheduling class\n"
#~ "                      0: none, 1: realtime, 2: best-effort, 3: idle\n"
#~ "  -t                  ignore failures\n"
#~ msgstr ""
#~ "ionice - zet of toont de in-/uitvoer-scheduling-klasse en -prioriteit\n"
#~ "\n"
#~ "Gebruik:\n"
#~ "  ionice [opties] -p <PID>...\n"
#~ "  ionice [opties] <opdracht> [<argument>...]\n"
#~ "\n"
#~ "Opties:\n"
#~ "  -n <klassedata>    klassedata (0-7, lager is hogere prioriteit)\n"
#~ "  -c <klasse>        scheduling-klasse -- 0=geen, 1=realtime,\n"
#~ "                       2=zo_goed_als_het_gaat, 3=als_er_niks_anders_is\n"
#~ "  -t                 mislukkingen negeren\n"
#~ "\n"

#~ msgid "CPU mask"
#~ msgstr "processorenmasker"

#~ msgid "Usage: shutdown [-h|-r] [-fqs] [now|hh:ss|+mins]\n"
#~ msgstr "Gebruik:  shutdown [-h|-r] [-fqs] [now|uu:ss|+minuten]\n"

#~ msgid "Shutdown process aborted"
#~ msgstr "Afsluitingsproces is afgebroken."

#~ msgid "only root can shut a system down."
#~ msgstr "Alleen root kan een systeem afsluiten."

#~ msgid "that must be tomorrow, can't you wait till then?"
#~ msgstr "Dat moet morgen zijn; kunt u niet tot dan wachten?"

#~ msgid "for maintenance; bounce, bounce"
#~ msgstr "voor onderhoud -- joepie"

#~ msgid "The system is being shut down within 5 minutes"
#~ msgstr "Het systeem wordt binnen vijf minuten afgesloten."

#~ msgid "Login is therefore prohibited."
#~ msgstr "Inloggen is daarom niet toegestaan."

#~ msgid "rebooted by %s: %s"
#~ msgstr "opnieuw gestart door %s: %s"

#~ msgid "halted by %s: %s"
#~ msgstr "afgesloten door %s: %s"

#~ msgid "Why am I still alive after reboot?"
#~ msgstr "Waarom ben ik er nog na een herstart?"

#~ msgid "Now you can turn off the power..."
#~ msgstr "U kunt de computer nu uitschakelen..."

#~ msgid "Calling kernel power-off facility...\n"
#~ msgstr "De uitschakel-voorziening van de kernel wordt aangeroepen...\n"

#~ msgid "Error powering off\t%s\n"
#~ msgstr "Fout bij het uitschakelen\t%s\n"

#~ msgid "Executing the program \"%s\" ...\n"
#~ msgstr "Het programma '%s' wordt uitgevoerd...\n"

#~ msgid "URGENT: broadcast message from %s:"
#~ msgstr "BELANGRIJK: bericht van %s voor iedereen:"

#~ msgid "System going down in %d hours %d minutes"
#~ msgstr "Het systeem wordt over %d uur en %d minuten afgesloten."

#~ msgid "System going down in 1 hour %d minutes"
#~ msgstr "Het systeem wordt over 1 uur en %d minuten afgesloten."

#~ msgid "System going down in %d minutes\n"
#~ msgstr "Het systeem wordt over %d minuten afgesloten.\n"

#~ msgid "System going down in 1 minute\n"
#~ msgstr "Het systeem wordt over 1 minuut afgesloten.\n"

#~ msgid "System going down IMMEDIATELY!\n"
#~ msgstr "Het systeem wordt NU afgesloten!\n"

#~ msgid "Cannot fork for swapoff. Shrug!"
#~ msgstr "fork() voor swapoff is mislukt -- nou ja"

#~ msgid "Cannot exec swapoff, hoping umount will do the trick."
#~ msgstr "Uitvoeren van swapoff is mislukt; hopelijk lost umount het op."

#~ msgid "Cannot fork for umount, trying manually."
#~ msgstr "fork() voor umount is mislukt; dan maar zonder nieuw proces."

#~ msgid "Cannot exec %s, trying umount.\n"
#~ msgstr "Uitvoeren van %s is mislukt; umount wordt geprobeerd.\n"

#~ msgid "Cannot exec umount, giving up on umount."
#~ msgstr "Uitvoeren van umount is mislukt -- gestopt"

#~ msgid "Unmounting any remaining filesystems..."
#~ msgstr "Afkoppelen van resterende bestandssystemen..."

#~ msgid "shutdown: Couldn't umount %s: %s\n"
#~ msgstr "shutdown: Kan %s niet afkoppelen: %s\n"

#~ msgid "Booting to single user mode.\n"
#~ msgstr "Opstarten in ééngebruikersmodus.\n"

#~ msgid "exec of single user shell failed\n"
#~ msgstr "Uitvoeren van ééngebruikersshell is mislukt\n"

#~ msgid "fork of single user shell failed\n"
#~ msgstr "fork() van ééngebruikersshell is mislukt\n"

#~ msgid "error opening fifo\n"
#~ msgstr "fout bij openen van fifo\n"

#~ msgid "error setting close-on-exec on /dev/initctl"
#~ msgstr "fout bij instellen van sluiten-bij-uitvoeren op /dev/initctl"

#~ msgid "error running finalprog\n"
#~ msgstr "fout bij uitvoeren van finalprog\n"

#~ msgid "error forking finalprog\n"
#~ msgstr "fout bij fork() van finalprog\n"

#~ msgid "Wrong password.\n"
#~ msgstr "Verkeerd wachtwoord.\n"

#~ msgid "lstat of path failed\n"
#~ msgstr "lstat() van pad is mislukt\n"

#~ msgid "respawning: \"%s\" too fast: quenching entry\n"
#~ msgstr "\"%s\" wordt te frequent herboren: item wordt afgeknepen\n"

#~ msgid "fork failed\n"
#~ msgstr "fork() is mislukt\n"

#~ msgid "cannot open inittab\n"
#~ msgstr "kan bestand 'inittab' niet openen\n"

#~ msgid "no TERM or cannot stat tty\n"
#~ msgstr "geen TERM ingesteld, of kan status van terminal niet opvragen\n"

#~ msgid "error at stopping service \"%s\"\n"
#~ msgstr "fout bij stoppen van dienst \"%s\"\n"

#~ msgid "Stopped service: %s\n"
#~ msgstr "Gestopte dienst: \"%s\"\n"

#~ msgid "error at starting service \"%s\"\n"
#~ msgstr "fout bij starten van dienst \"%s\"\n"

#~ msgid "Usage: %s [-c] [-n level] [-r] [-s bufsize]\n"
#~ msgstr "Gebruik:  %s [-c] [-n niveau] [-r] [-s buffergrootte]\n"

#~ msgid "error: strdup failed"
#~ msgstr "fout: strdup() is mislukt"

#~ msgid "error: calloc failed"
#~ msgstr "fout: calloc() is mislukt"

#~ msgid "usage: %s [-bfpx] [-l nline]"
#~ msgstr "Gebruik:  %s [-bfpx] [-l te_bufferen_aantal_regels]"

#~ msgid "usage: %s [ - ] [ -2 ] [ file ... ]\n"
#~ msgstr "Gebruik:  %s [-] [-2] [BESTAND...]\n"

#~ msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n"
#~ msgstr ""
#~ "Gebruik:  hexdump [-bcCdovx] [-e opmaaktekenreeks] [-f opmaakbestand]\n"
#~ "          [-n te_interpreteren_aantal] [-s over_te_slaan_aantal] [bestand ...]\n"

#~ msgid "usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n"
#~ msgstr "Gebruik:  %s [-cdflpsu] [+regelnummer | +/patroon] naam1 naam2 ...\n"

#~ msgid "failed to initialize line buffer\n"
#~ msgstr "initialiseren van regelbuffer is mislukt\n"

#~ msgid "hexdump: can't read %s.\n"
#~ msgstr "hexdump: kan %s niet lezen\n"

#~ msgid "hexdump: line too long.\n"
#~ msgstr "hexdump: regel is te lang\n"

#~ msgid "realloc failed"
#~ msgstr "realloc() is mislukt"

#~ msgid "usage: tailf [-n N | -N] logfile"
#~ msgstr "Gebruik:  tailf [-n <getal> | -<getal>]  logbestand"

#~ msgid "Usage: %s [ -i ] [ -tTerm ] file...\n"
#~ msgstr "Gebruik:  %s [-i] [-t terminaltype] bestand...\n"

#~ msgid "Partition ends in the final partial cylinder"
#~ msgstr "Partitie eindigt in de laatste gedeeltelijke cilinder"

#~ msgid "Unable to open %s\n"
#~ msgstr "Kan %s niet openen\n"

#~ msgid "Unable to allocate any more memory\n"
#~ msgstr "Kan geen geheugen meer reserveren\n"

#~ msgid "got EOF thrice - exiting..\n"
#~ msgstr "driemaal EOF ontvangen -- afsluiting...\n"

#~ msgid "last: malloc failure.\n"
#~ msgstr "last: malloc() is mislukt\n"

#~ msgid "login: Out of memory\n"
#~ msgstr "login: Onvoldoende geheugen beschikbaar\n"

#~ msgid "login: no shell: %s.\n"
#~ msgstr "login: geen shell: %s\n"

#~ msgid "newgrp: setgid"
#~ msgstr "newgrp: setgid() is mislukt"

#~ msgid "newgrp: Permission denied"
#~ msgstr "newgrp: Toegang geweigerd"

#~ msgid "newgrp: setuid"
#~ msgstr "newgrp: setuid() is mislukt"

#~ msgid "%s: Cannot fork\n"
#~ msgstr "%s: Kan geen nieuw proces starten\n"

#~ msgid "%s: can't read %s.\n"
#~ msgstr "%s: kan %s niet lezen\n"

#~ msgid "%s: can't stat temporary file.\n"
#~ msgstr "%s: kan tijdelijk bestand niet vinden\n"

#~ msgid "%s: can't read temporary file.\n"
#~ msgstr "%s: kan tijdelijk bestand niet lezen\n"

#~ msgid "%s: parse error: %s"
#~ msgstr "%s: ontledingsfout: %s"

#~ msgid "%s: out of memory\n"
#~ msgstr "%s: onvoldoende geheugen beschikbaar\n"

#~ msgid "parse error at lines: "
#~ msgstr "ontledingsfouten op regels: "

#~ msgid "%s: illegal option -- %c\n"
#~ msgstr "%s: ongeldige optie -- %c\n"

#~ msgid "segments allocated %d\n"
#~ msgstr "gereserveerde segmenten =  %d\n"

#~ msgid "pages allocated %ld\n"
#~ msgstr "gereserveerde pagina's = %ld\n"

#~ msgid "pages resident  %ld\n"
#~ msgstr "pagina's in geheugen = %ld\n"

#~ msgid "pages swapped   %ld\n"
#~ msgstr "pagina's in wisselgeheugen = %ld\n"

#~ msgid "Swap performance: %ld attempts\t %ld successes\n"
#~ msgstr "Wisselgeheugenprestaties: %ld pogingen, %ld succesvol\n"

#~ msgid "renice: %s: unknown user\n"
#~ msgstr "renice: %s: onbekende gebruiker\n"

#~ msgid "renice: %s: bad value\n"
#~ msgstr "renice: %s: ongeldige waarde\n"

#~ msgid "%s: illegal interval %s seconds\n"
#~ msgstr "%s: ongeldig interval: %s seconden\n"

#~ msgid "%s: illegal time_t value %s\n"
#~ msgstr "%s: ongeldige waarde %s voor ontwakingstijdstip\n"

#~ msgid "%s: unable to execute %s: %s\n"
#~ msgstr "%s: kan '%s' niet uitvoeren: %s\n"

#~ msgid "rtc read"
#~ msgstr "lezen van hardwareklok"

#~ msgid "malloc error"
#~ msgstr "onvoldoende geheugen beschikbaar"

#~ msgid "usage: column [-tx] [-c columns] [file ...]\n"
#~ msgstr "Gebruik:  column [-c aantal_kolommen] [-t] [-x] [bestand ...]\n"

#~ msgid "od: od(1) has been deprecated for hexdump(1).\n"
#~ msgstr "od: od(1) wordt afgeraden; gebruik hexdump(1).\n"

#~ msgid "od: hexdump(1) compatibility doesn't support the -%c option%s\n"
#~ msgstr "od: hexdump(1)-compatibiliteit ondersteunt de optie '-%c' niet%s\n"

#~ msgid "; see strings(1)."
#~ msgstr "; zie strings(1)."

#~ msgid "Out of memory\n"
#~ msgstr "Onvoldoende geheugen beschikbaar\n"

#~ msgid "unable to allocate bufferspace"
#~ msgstr "kan geen bufferruimte reserveren"

#~ msgid "usage: rev [file ...]\n"
#~ msgstr "Gebruik:  rev [bestand ...]\n"

#~ msgid "Unable to allocate buffer.\n"
#~ msgstr "Reserveren van buffer is mislukt\n"

#~ msgid "Out of memory when growing buffer.\n"
#~ msgstr "Onvoldoende geheugen beschikbaar tijdens groeien van buffer\n"

# Met een hoofdletter want komt aan begin van zin, en voor "beleid" of "prioriteit".
#~ msgid "current"
#~ msgstr "Huidig(e)"

# Met een hoofdletter want komt aan begin van zin, en voor "beleid" of "prioriteit".
#~ msgid "new"
#~ msgstr "Nieuw(e)"

#~ msgid "mount: no medium found on %s ...trying again\n"
#~ msgstr "mount: geen medium gevonden op %s; ... nieuwe poging\n"

#~ msgid ""
#~ "Resource Specification:\n"
#~ "\t-m : shared_mem\n"
#~ "\t-q : messages\n"
#~ msgstr ""
#~ "Bronnenkeuze:\n"
#~ "    -m : gedeeld geheugen\n"
#~ "    -q : berichten\n"

#~ msgid ""
#~ "\t-s : semaphores\n"
#~ "\t-a : all (default)\n"
#~ msgstr ""
#~ "    -s : semaforen\n"
#~ "    -a : alle (is standaard)\n"

#~ msgid ""
#~ "Output Format:\n"
#~ "\t-t : time\n"
#~ "\t-p : pid\n"
#~ "\t-c : creator\n"
#~ msgstr ""
#~ "Uitvoerindeling:\n"
#~ "    -t : tijd\n"
#~ "    -p : PID\n"
#~ "    -c : aanmaker\n"

#~ msgid ""
#~ "\t-l : limits\n"
#~ "\t-u : summary\n"
#~ msgstr ""
#~ "    -l : grenzen\n"
#~ "    -u : samenvatting\n"

#~ msgid "error parse: %s"
#~ msgstr "ontledingsfout: %s"

#~ msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]"
#~ msgstr "Gebruik:  rdev [-rv] [-o PLAATS] [AFBEELDING [WAARDE [PLAATS]]]"

#~ msgid "  rdev /dev/fd0  (or rdev /linux, etc.) displays the current ROOT device"
#~ msgstr "  rdev /dev/fd0  (of rdev /linux, enz.)  huidig ROOT-apparaat tonen"

#~ msgid "  rdev /dev/fd0 /dev/hda2         sets ROOT to /dev/hda2"
#~ msgstr "  rdev /dev/fd0 /dev/hda2         ROOT instellen op /dev/hda2"

#~ msgid "  rdev -R /dev/fd0 1              set the ROOTFLAGS (readonly status)"
#~ msgstr "  rdev -R /dev/fd0 1              ROOTFLAGS instellen (alleen-lezenstatus)"

#~ msgid "  rdev -r /dev/fd0 627            set the RAMDISK size"
#~ msgstr "  rdev -r /dev/fd0 627            RAMDISK-grootte instellen"

#~ msgid "  rdev -v /dev/fd0 1              set the bootup VIDEOMODE"
#~ msgstr "  rdev -v /dev/fd0 1              VIDEOMODUS bij opstarten instellen"

#~ msgid "  rootflags ...                   same as rdev -R"
#~ msgstr "  rootflags ...                   is hetzelfde als rdev -R"

#~ msgid "  ramsize ...                     same as rdev -r"
#~ msgstr "  ramsize ...                     is hetzelfde als rdev -r"

#~ msgid "  vidmode ...                     same as rdev -v"
#~ msgstr "  vidmode ...                     is hetzelfde als rdev -v"

#~ msgid "Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..."
#~ msgstr ""
#~ "Opmerking: videomodi zijn: -3=vragen, -2=uitgebreid, -1=gewoon,\n"
#~ "                           1=sleutel1, 2=sleutel2, ..."

#~ msgid "      use -R 1 to mount root readonly, -R 0 for read/write."
#~ msgstr ""
#~ "Gebruik '-R 1' om root als alleen-lezen aan te koppelen,\n"
#~ "     of '-R 0' voor lezen-en-schrijven."

#~ msgid "missing comma"
#~ msgstr "komma ontbreekt"

#~ msgid "%s: error: label only with v1 swap area\n"
#~ msgstr "%s: fout: label is alleen mogelijk bij versie-1-wisselgeheugen\n"

#~ msgid "fatal: first page unreadable"
#~ msgstr "fataal: eerste pagina is onleesbaar"

#~ msgid ""
#~ "%s: Device '%s' contains a valid Sun disklabel.\n"
#~ "This probably means creating v0 swap would destroy your partition table.\n"
#~ "No swap was created. If you really want to create v0 swap on that device,\n"
#~ "use the -f option to force it.\n"
#~ msgstr ""
#~ "%s: Apparaat '%s' bevat een geldig Sun-schijflabel.\n"
#~ "Dit betekent waarschijnlijk dat het maken van versie-0-wisselgeheugen\n"
#~ "uw partitietabel zou vernielen.  Er is geen wisselgeheugen gemaakt.\n"
#~ "Als u echt versie-0-wisselgeheugen op dit apparaat wilt maken,\n"
#~ "kunt u de optie '-f' gebruiken om het af te dwingen.\n"

#~ msgid ""
#~ "Usage: fdisk [-b SSZ] [-u] DISK     Change partition table\n"
#~ "       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)\n"
#~ "       fdisk -s PARTITION           Give partition size(s) in blocks\n"
#~ "       fdisk -v                     Give fdisk version\n"
#~ "Here DISK is something like /dev/hdb or /dev/sda\n"
#~ "and PARTITION is something like /dev/hda7\n"
#~ "-u: give Start and End in sector (instead of cylinder) units\n"
#~ "-b 2048: (for certain MO disks) use 2048-byte sectors\n"
#~ msgstr ""
#~ "Gebruik:  fdisk [-b SECTORGROOTTE] [-u] APPARAAT       partitietabel wijzigen\n"
#~ "          fdisk -l [-b SECTORGROOTTE] [-u] APPARAAT    partitietabel weergeven\n"
#~ "          fdisk -s PARTITIE    partitiegrootte in blokken weergeven\n"
#~ "          fdisk -v             programmaversie tonen\n"
#~ "\n"
#~ "Hier is APPARAAT zoiets als /dev/hda of /dev/sdb,\n"
#~ "en PARTITIE zoiets als /dev/hda7 of /dev/sdb4.\n"
#~ "\n"
#~ "-u        Begin en Einde in sectoreenheden (in plaats van cilindereenheden)\n"
#~ "-b 2048   (voor sommige MO-schijven) 2048-byte sectoren gebruiken\n"

#~ msgid ""
#~ "Usage: fdisk [-l] [-b SSZ] [-u] device\n"
#~ "E.g.: fdisk /dev/hda  (for the first IDE disk)\n"
#~ "  or: fdisk /dev/sdc  (for the third SCSI disk)\n"
#~ "  or: fdisk /dev/eda  (for the first PS/2 ESDI drive)\n"
#~ "  or: fdisk /dev/rd/c0d0  or: fdisk /dev/ida/c0d0  (for RAID devices)\n"
#~ "  ...\n"
#~ msgstr ""
#~ "Gebruik:  fdisk [-l] [-b SECTORGROOTTE] [-u] APPARAAT\n"
#~ "\n"
#~ "Bijvoorbeeld:  fdisk /dev/hda      (voor de eerste IDE-schijf)\n"
#~ "          of:  fdisk /dev/sdc      (voor de derde SCSI-schijf)\n"
#~ "          of:  fdisk /dev/edb      (voor de tweede PS/2-ESDI-schijf)\n"
#~ "          of:  fdisk /dev/rd/c0d0  (voor RAID-apparaten)\n"
#~ "          ...\n"

#~ msgid ""
#~ "The number of cylinders for this disk is set to %d.\n"
#~ "There is nothing wrong with that, but this is larger than 1024,\n"
#~ "and could in certain setups cause problems with:\n"
#~ "1) software that runs at boot time (e.g., old versions of LILO)\n"
#~ "2) booting and partitioning software from other OSs\n"
#~ "   (e.g., DOS FDISK, OS/2 FDISK)\n"
#~ msgstr ""
#~ "Het aantal cilinders van deze schijf is ingesteld op %d.\n"
#~ "Hier is niets mis mee, maar het is groter dan 1024 en kan\n"
#~ "bij bepaalde instellingen problemen veroorzaken met:\n"
#~ "1) opstartsoftware (bijvoorbeeld oude versies van LILO),\n"
#~ "2) partitioneringssoftware van andere besturingssytemen\n"
#~ "   (bijvoorbeeld DOS FDISK of OS/2 FDISK).\n"

#~ msgid "# partition table of %s\n"
#~ msgstr "# Partitietabel van %s\n"

#~ msgid "unit: sectors\n"
#~ msgstr "eenheid: sectoren \n"

#~ msgid " start=%9lu"
#~ msgstr " begin=%9lu"

#~ msgid ", bootable"
#~ msgstr ", opstartbaar"

#~ msgid "namei: could not chdir to root!\n"
#~ msgstr "namei: kan niet naar hoofdmap gaan!\n"

#~ msgid "namei: could not stat root!\n"
#~ msgstr "namei: kan status van hoofdmap niet bepalen!\n"

#~ msgid "namei: buf overflow\n"
#~ msgstr "namei: bufferoverloop\n"

#~ msgid " ? could not chdir into %s - %s (%d)\n"
#~ msgstr "??? naar map %s gaan is mislukt -- %s (%d)\n"

#~ msgid " ? problems reading symlink %s - %s (%d)\n"
#~ msgstr "??? problemen bij lezen van symbolische koppeling %s -- %s (%d)\n"

#~ msgid "  *** EXCEEDED UNIX LIMIT OF SYMLINKS ***\n"
#~ msgstr "  *** MAXIMUM AANTAL SYMBOLISCHE KOPPELINGEN IS OVERSCHREDEN ***\n"

#~ msgid "namei: unknown file type 0%06o on file %s\n"
#~ msgstr "namei: onbekende bestandssoort 0%06o bij bestand %s\n"

#~ msgid "mount: going to mount %s by %s\n"
#~ msgstr "mount: aankoppelen van %s via %s\n"

#~ msgid "mount: no LABEL=, no UUID=, going to mount %s by path\n"
#~ msgstr "mount: geen LABEL= noch UUID=; aankoppelen van %s via pad\n"

#~ msgid "could not umount %s - trying %s instead\n"
#~ msgstr "kan %s niet afkoppelen; nu poging met %s...\n"