.\" -*- nroff -*-
.TH CHATTR 1 "@E2FSPROGS_MONTH@ @E2FSPROGS_YEAR@" "E2fsprogs version @E2FSPROGS_VERSION@"
.SH NAME
chattr \- change file attributes on a Linux file system
.SH SYNOPSIS
.B chattr
[
.B \-RVf
]
[
.B \-v
.I version
]
[
.B \-p
.I project
]
[
.I mode
]
.I files...
.SH DESCRIPTION
.B chattr
changes the file attributes on a Linux file system.
.PP
The format of a symbolic mode is +-=[aAcCdDeijsStTu].
.PP
The operator '+' causes the selected attributes to be added to the
existing attributes of the files; '-' causes them to be removed; and '='
causes them to be the only attributes that the files have.
.PP
The letters 'aAcCdDeijPsStTu' select the new attributes for the files:
append only (a),
no atime updates (A),
compressed (c),
no copy on write (C),
no dump (d),
synchronous directory updates (D),
extent format (e),
immutable (i),
data journalling (j),
project hierarchy (P),
secure deletion (s),
synchronous updates (S),
no tail-merging (t),
top of directory hierarchy (T),
and undeletable (u).
.PP
The following attributes are read-only, and may be listed by
.BR lsattr (1)
but not modified by chattr:
compression error (E),
huge file (h),
indexed directory (I),
inline data (N),
compression raw access (X),
and compressed dirty file (Z).
.PP
Not all flags are supported or utilized by all filesystems; refer to
filesystem-specific man pages such as
.BR btrfs (5),
.BR ext4 (5),
and
.BR xfs (5)
for more filesystem-specific details.
.SH OPTIONS
.TP
.B \-R
Recursively change attributes of directories and their contents.
.TP
.B \-V
Be verbose with chattr's output and print the program version.
.TP
.B \-f
Suppress most error messages.
.TP
.BI \-v " version"
Set the file's version/generation number.
.TP
.BI \-p " project"
Set the file's project number.
.SH ATTRIBUTES
A file with the 'a' attribute set can only be open in append mode for writing.
Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE
capability can set or clear this attribute.
.PP
When a file with the 'A' attribute set is accessed, its atime record is
not modified.  This avoids a certain amount of disk I/O for laptop
systems.
.PP
A file with the 'c' attribute set is automatically compressed on the disk
by the kernel.  A read from this file returns uncompressed data.  A write to
this file compresses data before storing them on the disk.  Note: please
make sure to read the bugs and limitations section at the end of this
document.
.PP
A file with the 'C' attribute set will not be subject to copy-on-write
updates.  This flag is only supported on file systems which perform
copy-on-write.  (Note: For btrfs, the 'C' flag should be
set on new or empty files.  If it is set on a file which already has
data blocks, it is undefined when the blocks assigned to the file will
be fully stable.  If the 'C' flag is set on a directory, it will have no
effect on the directory, but new files created in that directory will
have the No_COW attribute set.)
.PP
A file with the 'd' attribute set is not candidate for backup when the
.BR dump (8)
program is run.
.PP
When a directory with the 'D' attribute set is modified,
the changes are written synchronously on the disk; this is equivalent to
the 'dirsync' mount option applied to a subset of the files.
.PP
The 'e' attribute indicates that the file is using extents for mapping
the blocks on disk.  It may not be removed using
.BR chattr (1).
.PP
The 'E' attribute is used by the experimental encryption patches to
indicate that the file has been encrypted.  It may not be
set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
The 'h' attribute indicates the file is storing its blocks in units of the
filesystem blocksize instead of in units of sectors, and means that the file
is (or at one time was) larger than 2TB.  It may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
A file with the 'i' attribute cannot be modified: it cannot be deleted or
renamed, no link can be created to this file and no data can be written
to the file.  Only the superuser or a process possessing the
CAP_LINUX_IMMUTABLE capability can set or clear this attribute.
.PP
The 'I' attribute is used by the htree code to indicate that a directory
is being indexed using hashed trees.  It may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
A file with the 'j' attribute has all of its data written to the ext3
or ext4 journal before being written to the file itself, if the filesystem
is mounted with the "data=ordered" or "data=writeback" options.  When the
filesystem is mounted with the "data=journal" option all file data
is already journalled and this attribute has no effect.  Only
the superuser or a process possessing the CAP_SYS_RESOURCE
capability can set or clear this attribute.
.PP
A file with the 'N' attribute set indicates that the file has data
stored inline, within the inode itself. It may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
A directory with the 'P' attribute set will enforce a hierarchical
structure for project id's.  This means that files and directory created
in the directory will inherit the project id of the directory, rename
operations are constrained so when a file or directory is moved into
another directory, that the project id's much match.  In addition, a
hard link to file can only be created when the project id for the file
and the destination directory match.
.PP
When a file with the 's' attribute set is deleted, its blocks are zeroed
and written back to the disk.  Note: please make sure to read the bugs
and limitations section at the end of this document.
.PP
When a file with the 'S' attribute set is modified,
the changes are written synchronously on the disk; this is equivalent to
the 'sync' mount option applied to a subset of the files.
.PP
A file with the 't' attribute will not have a partial block fragment at
the end of the file merged with other files (for those filesystems which
support tail-merging).  This is necessary for applications such as LILO
which read the filesystem directly, and which don't understand tail-merged
files.  Note: As of this writing, the ext2 or ext3 filesystems do not
(yet, except in very experimental patches) support tail-merging.
.PP
A directory with the 'T' attribute will be deemed to be the top of
directory hierarchies for the purposes of the Orlov block allocator.
This is a hint to the block allocator used by ext3 and ext4 that the
subdirectories under this directory are not related, and thus should be
spread apart for allocation purposes.   For example it is a very good
idea to set the 'T' attribute on the /home directory, so that /home/john
and /home/mary are placed into separate block groups.  For directories
where this attribute is not set, the Orlov block allocator will try to
group subdirectories closer together where possible.
.PP
When a file with the 'u' attribute set is deleted, its contents are
saved.  This allows the user to ask for its undeletion.  Note: please
make sure to read the bugs and limitations section at the end of this
document.
.PP
The 'X' attribute is used by the experimental compression patches to
indicate that the raw contents of a compressed file can be accessed
directly.  It currently may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
The 'Z' attribute is used by the experimental compression patches to
indicate a compressed file is dirty.  It may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
.SH AUTHOR
.B chattr
was written by Remy Card <Remy.Card@linux.org>.  It is currently being
maintained by Theodore Ts'o <tytso@alum.mit.edu>.
.SH BUGS AND LIMITATIONS
The 'c', 's',  and 'u' attributes are not honored
by the ext2, ext3, and ext4 filesystems as implemented in the current
mainline Linux kernels.
.PP
The 'j' option is only useful if the filesystem is mounted as ext3 or ext4.
.PP
The 'D' option is only useful on Linux kernel 2.5.19 and later.
.SH AVAILABILITY
.B chattr
is part of the e2fsprogs package and is available from
http://e2fsprogs.sourceforge.net.
.SH SEE ALSO
.BR lsattr (1),
.BR btrfs (5),
.BR ext4 (5),
.BR xfs (5).