| #! /bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| # Copyright (c) 2008 Eric Sandeen. All Rights Reserved. |
| # |
| # FS QA Test No. 194 |
| # |
| # Test mapping around/over holes for sub-page blocks |
| # |
| seq=`basename $0` |
| seqres=$RESULT_DIR/$seq |
| echo "QA output created by $seq" |
| |
| here=`pwd` |
| tmp=/tmp/$$ |
| status=1 # failure is the default! |
| trap "_cleanup; exit \$status" 0 1 2 3 15 |
| |
| _cleanup() |
| { |
| cd / |
| # Unmount the V4 filesystem we forcibly created to run this test so that |
| # the post-test wrapup checks won't try to remount the filesystem with |
| # different MOUNT_OPTIONS (specifically, the ones that get screened out by |
| # _force_xfsv4_mount_options) and fail. |
| _scratch_unmount |
| rm -f $tmp.* |
| } |
| |
| # get standard environment, filters and checks |
| . ./common/rc |
| . ./common/filter |
| |
| # only xfs supported due to use of xfs_bmap |
| _supported_fs xfs |
| |
| # real QA test starts here |
| rm -f $seqres.full |
| |
| _require_scratch |
| _scratch_mkfs_xfs >/dev/null 2>&1 |
| |
| # For this test we use block size = 1/8 page size |
| pgsize=`$here/src/feature -s` |
| blksize=`expr $pgsize / 8` |
| secsize=`_min_dio_alignment $SCRATCH_DEV` |
| |
| if [ $secsize -gt $blksize ];then |
| _notrun "sector size($secsize) too large for platform page size($pgsize)" |
| fi |
| |
| # Filter out file mountpoint and physical location info |
| # Input: |
| # EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL |
| # 0: [0..63]: 160..223 0 (160..223) 64 |
| # 1: [64..127]: hole 64 |
| # Output: |
| # SCRATCH_MNT/testfile4: TYPE |
| # EXT: TYPE TOTAL |
| # 0: blocks 1 |
| # 1: hole 1 |
| |
| _filter_bmap() |
| { |
| tee -a $seqres.full | \ |
| sed "s#$SCRATCH_MNT#SCRATCH_MNT#g" | \ |
| awk \ |
| '$3 ~ /hole/ { print $1 "\t" $3 "\t" ($4 * 512) / blksize; next } |
| $1 ~ /^[0-9]/ { print $1 "\tblocks\t" ($6 * 512) / blksize; next } |
| $1 ~ /^SCRATCH/ { print $1; next } |
| { print $1 "\tTYPE\t" $6 }' blksize=$blksize |
| } |
| |
| # Filter out offsets, which vary by blocksize |
| _filter_od() |
| { |
| tee -a $seqres.full | \ |
| sed -e "s/^[0-9A-Fa-f ]\{7,8\}//" |
| } |
| |
| unset MKFS_OPTIONS |
| unset XFS_MKFS_OPTIONS |
| |
| # we need 512 byte block size, so crc's are turned off |
| _scratch_mkfs_xfs -m crc=0 -b size=$blksize >/dev/null 2>&1 |
| _scratch_mount |
| test "$(_get_block_size $SCRATCH_MNT)" = $blksize || \ |
| _notrun "Could not get $blksize-byte blocks" |
| |
| |
| # 512b block / 4k page example: |
| # |
| #1) Write 1k of data (buffered): |
| # |
| # |1111|1111| |
| # |
| # 2) ftruncate back to 256 bytes: |
| # |
| # |1100| |
| # |
| # 3) ftruncate out to 4k: ("H" means hole (expected)) |
| # |
| # |1100|HHHH|HHHH|HHHH|HHHH|HHHH|HHHH|HHHH| |
| # |
| # So we should have 1 block of data/0, 7 blocks of holes. |
| # |
| # 4) check what's there with a direct IO read |
| # |
| # In fact what I get is 1 block of data/0, 1 block of 0's, and 7 blocks of |
| # garbage: |
| # |
| # |1100|0000|GGGG|GGGG|GGGG|GGGG|GGGG|GGGG| |
| # |
| # The garbage is in fact stale data from the disk. |
| # |
| # Check that we don't get stale data and that the hole is a hole: |
| |
| echo "== Test 1 ==" |
| # Write, truncate in, truncate out |
| xfs_io \ |
| -c "pwrite -S 0x11 -b `expr $pgsize / 2` 0 `expr $pgsize / 2`" \ |
| -c "truncate `expr $blksize / 2`" \ |
| -c "truncate $pgsize" \ |
| -t -f $SCRATCH_MNT/testfile1 >> $seqres.full |
| |
| # directio read of entire file |
| xfs_io \ |
| -c "pread 0 $pgsize" \ |
| -d $SCRATCH_MNT/testfile1 >> $seqres.full |
| |
| xfs_bmap -v $SCRATCH_MNT/testfile1 | _filter_bmap |
| od -x $SCRATCH_MNT/testfile1 | _filter_od |
| |
| # Similar but write another block to create block/hole/block/hole |
| |
| echo "== Test 2 ==" |
| # Write, truncate in, truncate out, write to middle |
| xfs_io \ |
| -c "pwrite -S 0x11 -b `expr $pgsize / 2` 0 `expr $pgsize / 2`" \ |
| -c "truncate `expr $blksize / 2`" \ |
| -c "truncate $pgsize" \ |
| -c "pwrite -S 0x22 -b $blksize `expr $blksize \* 4` $blksize" \ |
| -t -f $SCRATCH_MNT/testfile2 >> $seqres.full |
| |
| # directio read of entire file |
| xfs_io \ |
| -c "pread 0 $pgsize" \ |
| -d $SCRATCH_MNT/testfile2 >> $seqres.full |
| |
| xfs_bmap -v $SCRATCH_MNT/testfile2 | _filter_bmap |
| od -x $SCRATCH_MNT/testfile2 | _filter_od |
| |
| # 512 byte block / 4k page example: |
| |
| # direct write 1 page (8 blocks) of "0x11" to 0x1000 |
| # map read 1 block, 512 (0x200) at 0 |
| # truncate to half a block, 256 (0x100) |
| # truncate to block+1, 513 (0x201) |
| # direct write "0x22" for 1 block at offset 2048 (0x800) |
| |
| # |1111|1111|1111|1111|1111|1111|1111|1111| Write 1's |
| # |MRMR|1111|1111|1111|1111|1111|1111|1111| mapread |
| # |11--| truncate down |
| # |1100|0---| truncate up, block+1 |
| # | | |HHHH|HHHH|2222| Write 2's (extending) |
| |
| # |uptodate?| |
| # |1100|0000|1111|1111|2222|----|----|----| <- potential badness |
| |
| # We're looking for this badness due to mapping over a hole: |
| # Exposes stale data from 0x400 (1024) through 0x800 (2048) |
| |
| # 00000000 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 |................| |
| # * |
| # 00000100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| |
| # * |
| # 00000400 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 |................| <- BAD |
| # * |
| # 00000800 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 |""""""""""""""""| |
| # * |
| # 00000a00 |
| |
| # We *should* get: |
| # |1100|HHHH|HHHH|HHHH|2222|----|----|----| |
| |
| echo "== Test 3 ==" |
| xfs_io \ |
| -c "pwrite -S 0x11 -b $pgsize 0 $pgsize" \ |
| -c "mmap -r 0 $blksize" -c "mread 0 $blksize" -c "munmap" \ |
| -c "truncate `expr $blksize / 2`" \ |
| -c "truncate `expr $blksize + 1`" \ |
| -c "pwrite -S 0x22 -b $blksize `expr $pgsize / 2` $blksize" \ |
| -t -d -f $SCRATCH_MNT/testfile3 >> $seqres.full |
| |
| xfs_bmap -v $SCRATCH_MNT/testfile3 | _filter_bmap |
| od -x $SCRATCH_MNT/testfile3 | _filter_od |
| |
| # Now try the same thing but write a sector in the middle of that hole |
| # If things go badly stale data will be exposed either side. |
| # This is most interesting for block size > 512 (page size > 4096) |
| |
| # We *should* get: |
| # |1100|HHHH|33HH|HHHH|2222|----|----|----| |
| |
| echo "== Test 4 ==" |
| xfs_io \ |
| -c "pwrite -S 0x11 -b $pgsize 0 $pgsize" \ |
| -c "mmap -r 0 $blksize" -c "mread 0 $blksize" -c "munmap" \ |
| -c "truncate `expr $blksize / 2`" \ |
| -c "truncate `expr $blksize + 1`" \ |
| -c "pwrite -S 0x22 -b $blksize `expr $pgsize / 2` $blksize" \ |
| -c "pwrite -S 0x33 -b $secsize `expr $blksize \* 2` $secsize" \ |
| -t -d -f $SCRATCH_MNT/testfile4 >> $seqres.full |
| |
| xfs_bmap -v $SCRATCH_MNT/testfile4 | _filter_bmap |
| od -x $SCRATCH_MNT/testfile4 | _filter_od |
| |
| # success, all done |
| status=0 |
| exit |