diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
index 78edd63..a357193 100644
--- a/Documentation/devicetree/bindings/power/actions,owl-sps.txt
+++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
@@ -3,11 +3,13 @@
 Required properties:
 - compatible          :  "actions,s500-sps" for S500
                          "actions,s700-sps" for S700
+                         "actions,s900-sps" for S900
 - reg                 :  Offset and length of the register set for the device.
 - #power-domain-cells :  Must be 1.
                          See macros in:
                           include/dt-bindings/power/owl-s500-powergate.h for S500
                           include/dt-bindings/power/owl-s700-powergate.h for S700
+                          include/dt-bindings/power/owl-s900-powergate.h for S900
 
 
 Example:
diff --git a/MAINTAINERS b/MAINTAINERS
index a5b256b..e9d6ce3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1175,18 +1175,25 @@
 
 ARM/ACTIONS SEMI ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
+R:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 N:	owl
 F:	arch/arm/mach-actions/
 F:	arch/arm/boot/dts/owl-*
 F:	arch/arm64/boot/dts/actions/
+F:	drivers/clk/actions/
 F:	drivers/clocksource/owl-*
+F:	drivers/dma/owl-dma.c
+F:	drivers/i2c/busses/i2c-owl.c
 F:	drivers/pinctrl/actions/*
 F:	drivers/soc/actions/
 F:	include/dt-bindings/power/owl-*
 F:	include/linux/soc/actions/
 F:	Documentation/devicetree/bindings/arm/actions.txt
+F:	Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+F:	Documentation/devicetree/bindings/dma/owl-dma.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-owl.txt
 F:	Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
 F:	Documentation/devicetree/bindings/power/actions,owl-sps.txt
 F:	Documentation/devicetree/bindings/timer/actions,owl-timer.txt
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
index ea4e01b..7c96c59 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Cubietech CubieBoard6
  *
  * Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
index 7be1d2e..e610d49 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi
index 079b2c0..81cc398 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/owl-s500-guitar.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * LeMaker Guitar SoM
  *
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include "owl-s500.dtsi"
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 43c9980..5ceb6cc 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Actions Semi S500 SoC
  *
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 393d2b5..cb786a8 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -3,6 +3,7 @@
 config ARCH_ACTIONS
 	bool "Actions Semi Platforms"
 	select OWL_TIMER
+	select PINCTRL
 	help
 	  This enables support for the Actions Semiconductor S900 SoC family.
 
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
index d8b9234..b57fd23 100644
--- a/arch/arm64/boot/dts/actions/Makefile
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+
 dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
 
 dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index ef79d79..28f3f4a 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -28,12 +28,6 @@
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};
-
-	uart3_clk: uart3-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <921600>;
-		#clock-cells = <0>;
-	};
 };
 
 &timer {
@@ -42,5 +36,4 @@
 
 &uart3 {
 	status = "okay";
-	clocks = <&uart3_clk>;
 };
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 66dd530..192c7b3 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2017 Andreas Färber
  */
 
+#include <dt-bindings/clock/actions,s700-cmu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -87,6 +88,12 @@
 		#clock-cells = <0>;
 	};
 
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -107,6 +114,7 @@
 		uart0: serial@e0120000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -114,6 +122,7 @@
 		uart1: serial@e0122000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -121,6 +130,7 @@
 		uart2: serial@e0124000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -128,6 +138,7 @@
 		uart3: serial@e0126000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -135,6 +146,7 @@
 		uart4: serial@e0128000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -142,6 +154,7 @@
 		uart5: serial@e012a000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -149,10 +162,18 @@
 		uart6: serial@e012c000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		cmu: clock-controller@e0168000 {
+			compatible = "actions,s700-cmu";
+			reg = <0x0 0xe0168000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+		};
+
 		sps: power-controller@e01b0100 {
 			compatible = "actions,s700-sps";
 			reg = <0x0 0xe01b0100 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index 21ca80f..732daaa 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;
@@ -24,11 +23,223 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+};
 
-	uart5_clk: uart5-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <921600>;
-		#clock-cells = <0>;
+&i2c0 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+	gpio-line-names =
+		"GPIO-A", /* GPIO_0, LSEC pin 23 */
+		"GPIO-B", /* GPIO_1, LSEC pin 24 */
+		"GPIO-C", /* GPIO_2, LSEC pin 25 */
+		"GPIO-D", /* GPIO_3, LSEC pin 26 */
+		"GPIO-E", /* GPIO_4, LSEC pin 27 */
+		"GPIO-F", /* GPIO_5, LSEC pin 28 */
+		"GPIO-G", /* GPIO_6, LSEC pin 29 */
+		"GPIO-H", /* GPIO_7, LSEC pin 30 */
+		"GPIO-I", /* GPIO_8, LSEC pin 31 */
+		"GPIO-J", /* GPIO_9, LSEC pin 32 */
+		"NC", /* GPIO_10 */
+		"NC", /* GPIO_11 */
+		"SIRQ2_1V8", /* GPIO_12 */
+		"PCM0_OUT", /* GPIO_13 */
+		"WIFI_LED", /* GPIO_14 */
+		"PCM0_SYNC", /* GPIO_15 */
+		"PCM0_CLK", /* GPIO_16 */
+		"PCM0_IN", /* GPIO_17 */
+		"BT_LED", /* GPIO_18 */
+		"LED0", /* GPIO_19 */
+		"LED1", /* GPIO_20 */
+		"JTAG_TCK", /* GPIO_21 */
+		"JTAG_TMS", /* GPIO_22 */
+		"JTAG_TDI", /* GPIO_23 */
+		"JTAG_TDO", /* GPIO_24 */
+		"[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+		"NC", /* GPIO_26 */
+		"[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+		"SD0_D0", /* GPIO_28 */
+		"SD0_D1", /* GPIO_29 */
+		"SD0_D2", /* GPIO_30 */
+		"SD0_D3", /* GPIO_31 */
+		"SD1_D0", /* GPIO_32 */
+		"SD1_D1", /* GPIO_33 */
+		"SD1_D2", /* GPIO_34 */
+		"SD1_D3", /* GPIO_35 */
+		"SD0_CMD", /* GPIO_36 */
+		"SD0_CLK", /* GPIO_37 */
+		"SD1_CMD", /* GPIO_38 */
+		"SD1_CLK", /* GPIO_39 */
+		"SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+		"SPI0_CS", /* GPIO_41, LSEC pin 12 */
+		"SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+		"SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+		"I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+		"I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+		"UART0_RX", /* GPIO_46, LSEC pin 7 */
+		"UART0_TX", /* GPIO_47, LSEC pin 5 */
+		"UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+		"UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+		"I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+		"I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+		"I2C0_SCLK", /* GPIO_52 */
+		"I2C0_SDATA", /* GPIO_53 */
+		"I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+		"I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+		"I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+		"I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+		"CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+		"CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+		"CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+		"CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+		"CSI0_CN", /* GPIO_62, HSEC pin 4 */
+		"CSI0_CP", /* GPIO_63, HSEC pin 2 */
+		"CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+		"CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+		"CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+		"CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+		"[CLK0]", /* GPIO_68, HSEC pin 15 */
+		"CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+		"CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+		"CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+		"CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+		"CSI1_CN", /* GPIO_73, HSEC pin 56 */
+		"CSI1_CP", /* GPIO_74, HSEC pin 54 */
+		"[CLK1]", /* GPIO_75, HSEC pin 17 */
+		"[GPIOD0]", /* GPIO_76 */
+		"[GPIOD1]", /* GPIO_77 */
+		"BT_RST_N", /* GPIO_78 */
+		"EXT_DC_EN", /* GPIO_79 */
+		"[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+		"[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+		"[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+		"WAKE_BT", /* GPIO_84 */
+		"WL_REG_ON", /* GPIO_85 */
+		"NC", /* GPIO_86 */
+		"NC", /* GPIO_87 */
+		"NC", /* GPIO_88 */
+		"NC", /* GPIO_89 */
+		"NC", /* GPIO_90 */
+		"WIFI_WAKE", /* GPIO_91 */
+		"BT_WAKE", /* GPIO_92 */
+		"NC", /* GPIO_93 */
+		"OTG_EN2", /* GPIO_94 */
+		"OTG_EN", /* GPIO_95 */
+		"DSI_DP3", /* GPIO_96, HSEC pin 45 */
+		"DSI_DN3", /* GPIO_97, HSEC pin 47 */
+		"DSI_DP1", /* GPIO_98, HSEC pin 33 */
+		"DSI_DN1", /* GPIO_99, HSEC pin 35 */
+		"DSI_CP", /* GPIO_100, HSEC pin 21 */
+		"DSI_CN", /* GPIO_101, HSEC pin 23 */
+		"DSI_DP0", /* GPIO_102, HSEC pin 27 */
+		"DSI_DN0", /* GPIO_103, HSEC pin 29 */
+		"DSI_DP2", /* GPIO_104, HSEC pin 39 */
+		"DSI_DN2", /* GPIO_105, HSEC pin 41 */
+		"N0_D0", /* GPIO_106 */
+		"N0_D1", /* GPIO_107 */
+		"N0_D2", /* GPIO_108 */
+		"N0_D3", /* GPIO_109 */
+		"N0_D4", /* GPIO_110 */
+		"N0_D5", /* GPIO_111 */
+		"N0_D6", /* GPIO_112 */
+		"N0_D7", /* GPIO_113 */
+		"N0_DQS", /* GPIO_114 */
+		"N0_DQSN", /* GPIO_115 */
+		"NC", /* GPIO_116 */
+		"NC", /* GPIO_117 */
+		"NC", /* GPIO_118 */
+		"N0_CEB1", /* GPIO_119 */
+		"CARD_DT", /* GPIO_120 */
+		"N0_CEB3", /* GPIO_121 */
+		"SD_DAT0", /* GPIO_122, HSEC pin 1 */
+		"SD_DAT1", /* GPIO_123, HSEC pin 3 */
+		"SD_DAT2", /* GPIO_124, HSEC pin 5 */
+		"SD_DAT3", /* GPIO_125, HSEC pin 7 */
+		"NC", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+		"[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+		"NC", /* GPIO_130 */
+		"SD_CMD", /* GPIO_131 */
+		"GPIO-L", /* GPIO_132, LSEC pin 34 */
+		"GPIO-K", /* GPIO_133, LSEC pin 33 */
+		"NC", /* GPIO_134 */
+		"SD_SCLK", /* GPIO_135 */
+		"NC", /* GPIO_136 */
+		"JTAG_TRST", /* GPIO_137 */
+		"I2C3_SCLK", /* GPIO_138 */
+		"LED2", /* GPIO_139 */
+		"LED3", /* GPIO_140 */
+		"I2C3_SDATA", /* GPIO_141 */
+		"UART3_RX", /* GPIO_142 */
+		"UART3_TX", /* GPIO_143 */
+		"UART3_RTSB", /* GPIO_144 */
+		"UART3_CTSB"; /* GPIO_145 */
+
+	i2c0_default: i2c0-default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1-default {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2-default {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
 	};
 };
 
@@ -38,5 +249,4 @@
 
 &uart5 {
 	status = "okay";
-	clocks = <&uart5_clk>;
 };
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
index 11406f6..491ddcc 100644
--- a/arch/arm64/boot/dts/actions/s900.dtsi
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/clock/actions,s900-cmu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -88,6 +88,18 @@
 		#clock-cells = <0>;
 	};
 
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	diff24M: diff24M {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -108,6 +120,7 @@
 		uart0: serial@e0120000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -115,6 +128,7 @@
 		uart1: serial@e0122000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -122,6 +136,7 @@
 		uart2: serial@e0124000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -129,6 +144,7 @@
 		uart3: serial@e0126000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -136,6 +152,7 @@
 		uart4: serial@e0128000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -143,6 +160,7 @@
 		uart5: serial@e012a000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -150,15 +168,111 @@
 		uart6: serial@e012c000 {
 			compatible = "actions,s900-uart", "actions,owl-uart";
 			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		sps: power-controller@e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
+		cmu: clock-controller@e0160000 {
+			compatible = "actions,s900-cmu";
+			reg = <0x0 0xe0160000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+		};
+
 		timer: timer@e0228000 {
 			compatible = "actions,s900-timer";
 			reg = <0x0 0xe0228000 0x0 0x8000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "timer1";
 		};
+
+		dma: dma-controller@e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
 	};
 };
diff --git a/include/dt-bindings/power/owl-s900-powergate.h b/include/dt-bindings/power/owl-s900-powergate.h
new file mode 100644
index 0000000..d939bd9
--- /dev/null
+++ b/include/dt-bindings/power/owl-s900-powergate.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */
+/*
+ * Actions Semi S900 SPS
+ *
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+#ifndef DT_BINDINGS_POWER_OWL_S900_POWERGATE_H
+#define DT_BINDINGS_POWER_OWL_S900_POWERGATE_H
+
+#define S900_PD_GPU_B	0
+#define S900_PD_VCE	1
+#define S900_PD_SENSOR	2
+#define S900_PD_VDE	3
+#define S900_PD_HDE	4
+#define S900_PD_USB3	5
+#define S900_PD_DDR0	6
+#define S900_PD_DDR1	7
+#define S900_PD_DE	8
+#define S900_PD_NAND	9
+#define S900_PD_USB2_H0	10
+#define S900_PD_USB2_H1	11
+
+#endif