blob: 9acce75b29abd9615e8ad0f0d7714231353eab7e [file] [log] [blame]
Freescale i.MX General Power Controller v2
The i.MX7S/D General Power Control (GPC) block contains Power Gating
Control (PGC) for various power domains.
Required properties:
- compatible: Should be "fsl,imx7d-gpc"
- reg: should be register base and length as documented in the
- interrupts: Should contain GPC interrupt request 1
Power domains contained within GPC node are generic power domain
providers, documented in
Documentation/devicetree/bindings/power/power_domain.txt, which are
described as subnodes of the power gating controller 'pgc' node,
which, in turn, is expected to contain the following:
Required properties:
- reg: Power domain index. Valid values are defined in
- #power-domain-cells: Should be 0
Optional properties:
- power-supply: Power supply used to power the domain
gpc: gpc@303a0000 {
compatible = "fsl,imx7d-gpc";
reg = <0x303a0000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <3>;
interrupt-parent = <&intc>;
pgc {
#address-cells = <1>;
#size-cells = <0>;
pgc_pcie_phy: power-domain@1 {
#power-domain-cells = <0>;
reg = <1>;
power-supply = <&reg_1p0d>;
Specifying power domain for IP modules
IP cores belonging to a power domain should contain a 'power-domains'
property that is a phandle for PGC node representing the domain.
Example of a device that is part of the PCIE_PHY power domain:
pcie: pcie@33800000 {
reg = <0x33800000 0x4000>,
<0x4ff00000 0x80000>;
/* ... */
power-domains = <&pgc_pcie_phy>;
/* ... */