| /* |
| * Copyright 2015 Armadeus Systems |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| chosen { |
| stdout-path = &uart4; |
| }; |
| |
| disp0 { |
| compatible = "fsl,imx-parallel-display"; |
| interface-pix-fmt = "bgr666"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_disp1>; |
| |
| display-timings { |
| lw700 { |
| clock-frequency = <33000033>; |
| hactive = <800>; |
| vactive = <480>; |
| hback-porch = <96>; |
| hfront-porch = <96>; |
| vback-porch = <20>; |
| vfront-porch = <21>; |
| hsync-len = <64>; |
| vsync-len = <4>; |
| hsync-active = <1>; |
| vsync-active = <1>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| }; |
| |
| port { |
| display_in: endpoint { |
| remote-endpoint = <&ipu1_di0_disp0>; |
| }; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| user-button { |
| label = "User button"; |
| gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| linux,code = <BTN_MISC>; |
| wakeup-source; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_leds>; |
| |
| user-led { |
| label = "User LED"; |
| gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| default-state = "on"; |
| }; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| |
| reg_3p3v: 3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_usbh1_vbus: usb-h1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_h1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| reg_usb_otg_vbus: usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx6-armadeus-sgtl5000", |
| "fsl,imx-audio-sgtl5000"; |
| model = "imx6-armadeus-sgtl5000"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| mux-int-port = <1>; |
| mux-ext-port = <3>; |
| }; |
| |
| sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-out; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, |
| <&gpio4 10 GPIO_ACTIVE_LOW>, |
| <&gpio4 11 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| ddc-i2c-bus = <&i2c3>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| touchscreen@48 { |
| compatible = "semtech,sx8654"; |
| reg = <0x48>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_touchscreen>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| codec: sgtl5000@a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| VDDA-supply = <®_3p3v>; |
| VDDIO-supply = <®_3p3v>; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| &ipu1_di0_disp0 { |
| remote-endpoint = <&display_in>; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| /* GPS */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| /* GSM */ |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| /* console */ |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usbh1_vbus>; |
| phy_type = "utmi"; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| vbus-supply = <®_usb_otg_vbus>; |
| dr_mode = "otg"; |
| status = "okay"; |
| }; |
| |
| /* microSD */ |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif>; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpios>; |
| |
| apf6dev { |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 |
| MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 |
| MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpiokeysgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_leds: gpioledsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 |
| >; |
| }; |
| |
| pinctrl_gpios: gpiosgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 |
| MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 |
| MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 |
| MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 |
| MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 |
| MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 |
| MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 |
| MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 |
| MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 |
| >; |
| }; |
| |
| pinctrl_gsm: gsmgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_disp1: ipu1disp1grp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 |
| MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_touchscreen: touchscreengrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 |
| >; |
| }; |
| }; |
| }; |
