blob: 47799f59faa5cbdfc8dad50bee16c52f1a9d1775 [file] [log] [blame]
/*
* arch/arm/boot/dts/axm55xx.dtsi
*
* Copyright (C) 2013 LSI
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/lsi,axm5516-clks.h>
#include "skeleton64.dtsi"
/ {
interrupt-parent = <&gic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
timer = &timer0;
};
clocks {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clk_ref0: clk_ref0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
clk_ref1: clk_ref1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
clk_ref2: clk_ref2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
clks: clock-controller@2010020000 {
compatible = "lsi,axm5516-clks";
#clock-cells = <1>;
reg = <0x20 0x10020000 0 0x20000>;
};
};
gic: interrupt-controller@2001001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x20 0x01001000 0 0x1000>,
<0x20 0x01002000 0 0x2000>,
<0x20 0x01004000 0 0x2000>,
<0x20 0x01006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv7-timer";
interrupts =
<GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a15-pmu";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
compatible = "simple-bus";
device_type = "soc";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
ranges;
syscon: syscon@2010030000 {
compatible = "lsi,axxia-syscon", "syscon";
reg = <0x20 0x10030000 0 0x2000>;
};
reset: reset@2010031000 {
compatible = "lsi,axm55xx-reset";
syscon = <&syscon>;
};
amba {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
serial0: uart@2010080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x20 0x10080000 0 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "disabled";
};
serial1: uart@2010081000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x20 0x10081000 0 0x1000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "disabled";
};
serial2: uart@2010082000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x20 0x10082000 0 0x1000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "disabled";
};
serial3: uart@2010083000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x20 0x10083000 0 0x1000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "disabled";
};
timer0: timer@2010091000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x20 0x10091000 0 0x1000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "okay";
};
gpio0: gpio@2010092000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x20 0x10092000 0x00 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "disabled";
};
gpio1: gpio@2010093000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x20 0x10093000 0x00 0x1000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks AXXIA_CLK_PER>;
clock-names = "apb_pclk";
status = "disabled";
};
};
};
};
/*
Local Variables:
mode: C
End:
*/