Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph/super.c: quiet sparse noise
ceph/mds_client.c: quiet sparse noise
ceph: use new D_COMPLETE dentry flag
ceph: clear parent D_COMPLETE flag when on dentry prune
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index f5bb0a3..53d99ed 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -71,3 +71,10 @@
a dump device, as kdump requires resetting the device in order
to work reliably.
+Where: /sys/bus/pci/devices/<dev>/ccissX/transport_mode
+Date: July 2011
+Kernel Version: 3.0
+Contact: iss_storagedev@hp.com
+Description: Value of "simple" indicates that the controller has been placed
+ in "simple mode". Value of "performant" indicates that the
+ controller has been placed in "performant mode".
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index c940239..2b90d32 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -166,8 +166,8 @@
else
do_that();
-This does not apply if one branch of a conditional statement is a single
-statement. Use braces in both branches.
+This does not apply if only one branch of a conditional statement is a single
+statement; in the latter case use braces in both branches:
if (condition) {
do_this();
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 91410b6..b68698f 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2486,6 +2486,9 @@
<listitem>
<para>Flash API. <xref linkend="flash-controls" /></para>
</listitem>
+ <listitem>
+ <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
+ </listitem>
</itemizedlist>
</section>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 23fdf79..3bc5ee8 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -232,8 +232,9 @@
<entry>Enables a power line frequency filter to avoid
flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are:
<constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1) and
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2).</entry>
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1),
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry>
</row>
<row>
<entry><constant>V4L2_CID_HUE_AUTO</constant></entry>
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index c57d1ec..3f47df1 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -927,6 +927,33 @@
Applications set or clear this flag before calling the
<constant>VIDIOC_QBUF</constant> ioctl.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_PREPARED</constant></entry>
+ <entry>0x0400</entry>
+ <entry>The buffer has been prepared for I/O and can be queued by the
+application. Drivers set or clear this flag when the
+<link linkend="vidioc-querybuf">VIDIOC_QUERYBUF</link>, <link
+ linkend="vidioc-qbuf">VIDIOC_PREPARE_BUF</link>, <link
+ linkend="vidioc-qbuf">VIDIOC_QBUF</link> or <link
+ linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl is called.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
+ <entry>0x0400</entry>
+ <entry>Caches do not have to be invalidated for this buffer.
+Typically applications shall use this flag if the data captured in the buffer
+is not going to be touched by the CPU, instead the buffer will, probably, be
+passed on to a DMA-capable hardware unit for further processing or output.
+</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
+ <entry>0x0800</entry>
+ <entry>Caches do not have to be cleaned for this buffer.
+Typically applications shall use this flag for output buffers if the data
+in this buffer has not been created by the CPU but by some DMA-capable unit,
+in which case caches have not been used.</entry>
+ </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 40132c2..2ab365c 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -469,6 +469,7 @@
&sub-close;
&sub-ioctl;
<!-- All ioctls go here. -->
+ &sub-create-bufs;
&sub-cropcap;
&sub-dbg-g-chip-ident;
&sub-dbg-g-register;
@@ -511,6 +512,7 @@
&sub-queryctrl;
&sub-query-dv-preset;
&sub-querystd;
+ &sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
new file mode 100644
index 0000000..73ae8a6
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -0,0 +1,139 @@
+<refentry id="vidioc-create-bufs">
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_CREATE_BUFS</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_CREATE_BUFS</refname>
+ <refpurpose>Create buffers for Memory Mapped or User Pointer I/O</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_create_buffers *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_CREATE_BUFS</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>This ioctl is used to create buffers for <link linkend="mmap">memory
+mapped</link> or <link linkend="userp">user pointer</link>
+I/O. It can be used as an alternative or in addition to the
+<constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter control over buffers
+is required. This ioctl can be called multiple times to create buffers of
+different sizes.</para>
+
+ <para>To allocate device buffers applications initialize relevant fields of
+the <structname>v4l2_create_buffers</structname> structure. They set the
+<structfield>type</structfield> field in the
+<structname>v4l2_format</structname> structure, embedded in this
+structure, to the respective stream or buffer type.
+<structfield>count</structfield> must be set to the number of required buffers.
+<structfield>memory</structfield> specifies the required I/O method. The
+<structfield>format</structfield> field shall typically be filled in using
+either the <constant>VIDIOC_TRY_FMT</constant> or
+<constant>VIDIOC_G_FMT</constant> ioctl(). Additionally, applications can adjust
+<structfield>sizeimage</structfield> fields to fit their specific needs. The
+<structfield>reserved</structfield> array must be zeroed.</para>
+
+ <para>When the ioctl is called with a pointer to this structure the driver
+will attempt to allocate up to the requested number of buffers and store the
+actual number allocated and the starting index in the
+<structfield>count</structfield> and the <structfield>index</structfield> fields
+respectively. On return <structfield>count</structfield> can be smaller than
+the number requested. The driver may also increase buffer sizes if required,
+however, it will not update <structfield>sizeimage</structfield> field values.
+The user has to use <constant>VIDIOC_QUERYBUF</constant> to retrieve that
+information.</para>
+
+ <table pgwide="1" frame="none" id="v4l2-create-buffers">
+ <title>struct <structname>v4l2_create_buffers</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>index</structfield></entry>
+ <entry>The starting buffer index, returned by the driver.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>count</structfield></entry>
+ <entry>The number of buffers requested or granted.</entry>
+ </row>
+ <row>
+ <entry>&v4l2-memory;</entry>
+ <entry><structfield>memory</structfield></entry>
+ <entry>Applications set this field to
+<constant>V4L2_MEMORY_MMAP</constant> or
+<constant>V4L2_MEMORY_USERPTR</constant>.</entry>
+ </row>
+ <row>
+ <entry>&v4l2-format;</entry>
+ <entry><structfield>format</structfield></entry>
+ <entry>Filled in by the application, preserved by the driver.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>reserved</structfield>[8]</entry>
+ <entry>A place holder for future extensions.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>ENOMEM</errorcode></term>
+ <listitem>
+ <para>No memory to allocate buffers for <link linkend="mmap">memory
+mapped</link> I/O.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EINVAL</errorcode></term>
+ <listitem>
+ <para>The buffer type (<structfield>type</structfield> field) or the
+requested I/O method (<structfield>memory</structfield>) is not
+supported.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml
new file mode 100644
index 0000000..7bde698
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml
@@ -0,0 +1,88 @@
+<refentry id="vidioc-prepare-buf">
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_PREPARE_BUF</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_PREPARE_BUF</refname>
+ <refpurpose>Prepare a buffer for I/O</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_buffer *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_PREPARE_BUF</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>Applications can optionally call the
+<constant>VIDIOC_PREPARE_BUF</constant> ioctl to pass ownership of the buffer
+to the driver before actually enqueuing it, using the
+<constant>VIDIOC_QBUF</constant> ioctl, and to prepare it for future I/O.
+Such preparations may include cache invalidation or cleaning. Performing them
+in advance saves time during the actual I/O. In case such cache operations are
+not required, the application can use one of
+<constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant> and
+<constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant> flags to skip the respective
+step.</para>
+
+ <para>The <structname>v4l2_buffer</structname> structure is
+specified in <xref linkend="buffer" />.</para>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>EBUSY</errorcode></term>
+ <listitem>
+ <para>File I/O is in progress.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EINVAL</errorcode></term>
+ <listitem>
+ <para>The buffer <structfield>type</structfield> is not
+supported, or the <structfield>index</structfield> is out of bounds,
+or no buffers have been allocated yet, or the
+<structfield>userptr</structfield> or
+<structfield>length</structfield> are invalid.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index 71cfbdc..3b2612e 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -1,6 +1,6 @@
To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
-'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are
-assigned globally at boot time only presently.
+'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
+globally at boot time only presently.
Each io queue has a set of io scheduler tunables associated with it. These
tunables control how the io scheduler works. You can find these entries
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index c00c6a5..71464e0 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -78,6 +78,16 @@
/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2
/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3
+CCISS simple mode support
+-------------------------
+
+The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
+from putting the controller into "performant" mode. The difference is that
+with simple mode, each command completion requires an interrupt, while with
+"performant mode" (the default, and ordinarily better performing) it is
+possible to have multiple command completions indicated by a single
+interrupt.
+
SCSI tape drive and medium changer support
------------------------------------------
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index cd67e90..9c452ef 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -454,8 +454,8 @@
move it into a new cgroup (possibly the root cgroup) by writing to the
new cgroup's tasks file.
-Note: If the ns cgroup is active, moving a process to another cgroup can
-fail.
+Note: Due to some restrictions enforced by some cgroup subsystems, moving
+a process to another cgroup can fail.
2.3 Mounting hierarchies by name
--------------------------------
diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
new file mode 100644
index 0000000..79caa56
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
@@ -0,0 +1,17 @@
+* Calxeda SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "calxeda,hb-ahci"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+
+Example:
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ };
+
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 39e9415..380914e 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -1,3 +1,8 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
* Board Control and Status (BCSR)
Required properties:
@@ -12,25 +17,26 @@
reg = <f8000000 8000>;
};
-* Freescale on board FPGA
+* Freescale on-board FPGA
This is the memory-mapped registers for on board FPGA.
Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
- set.
+- compatible: should be a board-specific string followed by a string
+ indicating the type of FPGA. Example:
+ "fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
- interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
-Example (MPC8610HPCD):
+Example (P1022DS):
- board-control@e8000000 {
- compatible = "fsl,fpga-pixis";
- reg = <0xe8000000 32>;
- interrupt-parent = <&mpic>;
- interrupts = <8 8>;
- };
+ board-control@3,0 {
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8 0 0>;
+ };
* Freescale BCSR GPIO banks
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
new file mode 100644
index 0000000..9d54eb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -0,0 +1,395 @@
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change. Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr" and "simple-bus".
+ The DCSR space exists in the memory-mapped bus.
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ or representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ or representing the size of physical addresses in
+ child nodes.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the DCSR space.
+
+EXAMPLE
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-epu"
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by the EPU.
+ The value of the interrupts property consists of three
+ interrupt specifiers. The format of the specifier is defined
+ by the binding document describing the node's interrupt parent.
+
+ The EPU counters can be configured to assert the performance
+ monitor interrupt signal based on either counter overflow or value
+ match. Which counter asserted the interrupt is captured in an EPU
+ Counter Interrupt Status Register (EPCPUISR).
+
+ The EPU unit can also be configured to assert either or both of
+ two interrupt signals based on debug event sources within the SoC.
+ The interrupt signals are epu_xt_int0 and epu_xt_int1.
+ Which event source asserted the interrupt is captured in an EPU
+ Interrupt Status Register (EPISR0,EPISR1).
+
+ Interrupt numbers are lised in order (perfmon, event0, event1).
+
+ - interrupt-parent
+ Usage: required
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped. Value must be "&mpic"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-npc"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+ The Nexus Port controller occupies two regions in the DCSR space
+ with distinct functionality.
+
+ The first register range describes the Nexus Port Controller
+ control and status registers.
+
+ The second register range describes the Nexus Port Controller
+ internal trace buffer. The NPC trace buffer is a small memory buffer
+ which stages the nexus trace data for transmission via the Aurora port
+ or to a DDR based trace buffer. In some configurations the NPC trace
+ buffer can be the only trace buffer used.
+
+
+EXAMPLE
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-nxc"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-corenet"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+ The CoreNet Debug controller occupies two regions in the DCSR space
+ with distinct functionality.
+
+ The first register range describes the CoreNet Debug Controller
+ functionalty to perform transaction and transaction attribute matches.
+
+ The second register range describes the CoreNet Debug Controller
+ functionalty to trigger event notifications and debug traces.
+
+EXAMPLE
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+ generic compatible string "fsl,dcsr-dpaa".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+ generic compatible string "fsl,dcsr-ocn".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-ddr"
+
+ - dev-handle
+ Usage: required
+ Definition: A phandle to associate this debug node with its
+ component controller.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+ generic compatible string "fsl,dcsr-nal".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+ generic compatible string "fsl,dcsr-rcpm".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the cpu
+ of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+ generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+ - cpu-handle
+ Usage: required
+ Definition: A phandle to associate this debug node with its cpu.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy",
+ "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy",
+ "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+
+=======================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 70558c3..5d586e1 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -25,6 +25,16 @@
are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
to MPIC.
+Optional properties:
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+ is used for MSI messaging. The address of MSIIR in PCI address space is
+ the MSI message address.
+
+ This property may be used in virtualized environments where the hypervisor
+ has created an alternate mapping for the MSIR block. See below for an
+ explanation.
+
+
Example:
msi@41600 {
compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
@@ -41,3 +51,35 @@
0xe7 0>;
interrupt-parent = <&mpic>;
};
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window. The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical"). However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address. Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives). The first subwindow after the end of guest memory is used for
+this. The address specified in the msi-address-64 property is the PCI
+address of MSIIR. The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.
diff --git a/Documentation/filesystems/hfs.txt b/Documentation/filesystems/hfs.txt
index bd0fa77..d096df6 100644
--- a/Documentation/filesystems/hfs.txt
+++ b/Documentation/filesystems/hfs.txt
@@ -1,3 +1,4 @@
+Note: This filesystem doesn't have a maintainer.
Macintosh HFS Filesystem for Linux
==================================
@@ -76,8 +77,6 @@
Credits
=======
-The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU)
-and is now maintained by Roman Zippel (roman@ardistech.com) at Ardis
-Technologies.
-Roman rewrote large parts of the code and brought in btree routines derived
-from Brad Boyer's hfsplus driver (also maintained by Roman now).
+The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU).
+Roman Zippel (roman@ardistech.com) rewrote large parts of the code and brought
+in btree routines derived from Brad Boyer's hfsplus driver.
diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.txt
index 59a919f..cfd0271 100644
--- a/Documentation/filesystems/inotify.txt
+++ b/Documentation/filesystems/inotify.txt
@@ -194,7 +194,8 @@
Each watch is associated with an inotify_watch structure. Watches are chained
off of each associated inotify_handle and each associated inode.
-See fs/inotify.c and fs/inotify_user.c for the locking and lifetime rules.
+See fs/notify/inotify/inotify_fsnotify.c and fs/notify/inotify/inotify_user.c
+for the locking and lifetime rules.
(vi) Rationale
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 76ffef9..3f44dbd 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -14,6 +14,10 @@
Prefix: 'w83627dhg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
+ * Winbond W83627UHG
+ Prefix: 'w83627uhg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: available from www.nuvoton.com
* Winbond W83667HG
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
@@ -42,14 +46,13 @@
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P, W83667HG, W83667HG-B, W83667HG-I (NCT6775F),
-and NCT6776F super I/O chips. We will refer to them collectively as
-Winbond chips.
+W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
+(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
+as Winbond chips.
-The chips implement three temperature sensors (up to four for 667HG-B, and nine
-for NCT6775F and NCT6776F), five fan rotation speed sensors, ten analog voltage
-sensors (only nine for the 627DHG), one VID (6 pins for the 627EHF/EHG, 8 pins
-for the 627DHG and 667HG), alarms with beep warnings (control unimplemented),
+The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
+(except for 627UHG), alarms with beep warnings (control unimplemented),
and some automatic fan regulation strategies (plus manual fan control mode).
The temperature sensor sources on W82677HG-B, NCT6775F, and NCT6776F are
@@ -86,17 +89,16 @@
temp1 -> pwm1
temp2 -> pwm2
-temp3 -> pwm3
+temp3 -> pwm3 (not on 627UHG)
prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
supported by the driver)
/sys files
----------
-name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
- it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
- for the W83667HG and W83667HG-B it is set to "w83667hg", for NCT6775F it
- is set to "nct6775", and for NCT6776F it is set to "nct6776".
+name - this is a standard hwmon device entry, it contains the name of
+ the device (see the prefix in the list of supported devices at
+ the top of this file)
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3ff0dad..9d66682 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -411,9 +411,9 @@
0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
semantics, i.e. sleep-to-RAM).
- It is always generate some kind
+ It always generates some kind
of event, either the hot key
- event or a ACPI sleep button
+ event or an ACPI sleep button
event. The firmware may
refuse to generate further FN+F4
key presses until a S3 or S4 ACPI
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 4996586..79699c2 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -61,8 +61,8 @@
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
blink_set() function (see <linux/leds.h>). To set an LED to blinking,
-however, it is better to use use the API function led_blink_set(),
-as it will check and implement software fallback if necessary.
+however, it is better to use the API function led_blink_set(), as it
+will check and implement software fallback if necessary.
To turn off blinking again, use the API function led_brightness_set()
as that will not just set the LED brightness but also stop any software
diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
index 4ccdbca..f2a2488 100644
--- a/Documentation/networking/ipvs-sysctl.txt
+++ b/Documentation/networking/ipvs-sysctl.txt
@@ -15,6 +15,23 @@
enabled and the variable is automatically set to 2, otherwise
the strategy is disabled and the variable is set to 1.
+conntrack - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If set, maintain connection tracking entries for
+ connections handled by IPVS.
+
+ This should be enabled if connections handled by IPVS are to be
+ also handled by stateful firewall rules. That is, iptables rules
+ that make use of connection tracking. It is a performance
+ optimisation to disable this setting otherwise.
+
+ Connections handled by the IPVS FTP application module
+ will have connection tracking entries regardless of this setting.
+
+ Only available when IPVS is compiled with CONFIG_IP_VS_NFCT enabled.
+
cache_bypass - BOOLEAN
0 - disabled (default)
not 0 - enabled
@@ -39,7 +56,7 @@
11 - IPVS packet handling (ip_vs_in/ip_vs_out)
12 or more - packet traversal
- Only available when IPVS is compiled with the CONFIG_IPVS_DEBUG
+ Only available when IPVS is compiled with CONFIG_IP_VS_DEBUG enabled.
Higher debugging levels include the messages for lower debugging
levels, so setting debug level 2, includes level 0, 1 and 2
@@ -123,13 +140,11 @@
secure_tcp - INTEGER
0 - disabled (default)
- The secure_tcp defense is to use a more complicated state
- transition table and some possible short timeouts of each
- state. In the VS/NAT, it delays the entering the ESTABLISHED
- until the real server starts to send data and ACK packet
- (after 3-way handshake).
+ The secure_tcp defense is to use a more complicated TCP state
+ transition table. For VS/NAT, it also delays entering the
+ TCP ESTABLISHED state until the three way handshake is completed.
- The value definition is the same as that of drop_entry or
+ The value definition is the same as that of drop_entry and
drop_packet.
sync_threshold - INTEGER
@@ -141,3 +156,36 @@
synchronized, every time the number of its incoming packets
modulus 50 equals the threshold. The range of the threshold is
from 0 to 49.
+
+snat_reroute - BOOLEAN
+ 0 - disabled
+ not 0 - enabled (default)
+
+ If enabled, recalculate the route of SNATed packets from
+ realservers so that they are routed as if they originate from the
+ director. Otherwise they are routed as if they are forwarded by the
+ director.
+
+ If policy routing is in effect then it is possible that the route
+ of a packet originating from a director is routed differently to a
+ packet being forwarded by the director.
+
+ If policy routing is not in effect then the recalculated route will
+ always be the same as the original route so it is an optimisation
+ to disable snat_reroute and avoid the recalculation.
+
+sync_version - INTEGER
+ default 1
+
+ The version of the synchronisation protocol used when sending
+ synchronisation messages.
+
+ 0 selects the original synchronisation protocol (version 0). This
+ should be used when sending synchronisation messages to a legacy
+ system that only understands the original synchronisation protocol.
+
+ 1 selects the current synchronisation protocol (version 1). This
+ should be used where possible.
+
+ Kernels with this sync_version entry are able to receive messages
+ of both version 1 and version 2 of the synchronisation protocol.
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index 6fe9001..13032c0 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -263,6 +263,8 @@
12: 'I' if the kernel is working around a severe bug in the platform
firmware (BIOS or similar).
+ 13: 'O' if an externally-built ("out-of-tree") module has been loaded.
+
The primary reason for the 'Tainted: ' string is to tell kernel
debuggers if this is a clean kernel or if anything unusual has
occurred. Tainting is permanent: even if an offending module is
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index 38b5724..316c2ba 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -22,12 +22,12 @@
either wakes them up, if they are kernel threads, or sends fake signals to them,
if they are user space processes. A task that has TIF_FREEZE set, should react
to it by calling the function called refrigerator() (defined in
-kernel/power/process.c), which sets the task's PF_FROZEN flag, changes its state
+kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
Then, we say that the task is 'frozen' and therefore the set of functions
handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c and include/linux/freezer.h). User space
-processes are generally frozen before kernel threads.
+defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
+User space processes are generally frozen before kernel threads.
It is not recommended to call refrigerator() directly. Instead, it is
recommended to use the try_to_freeze() function (defined in
@@ -95,7 +95,7 @@
additional memory and we prevent them from doing that by freezing them earlier.
[Of course, this also means that device drivers should not allocate substantial
amounts of memory from their .suspend() callbacks before hibernation, but this
-is e separate issue.]
+is a separate issue.]
3. The third reason is to prevent user space processes and some kernel threads
from interfering with the suspending and resuming of devices. A user space
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 0e85608..5336149 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -789,6 +789,16 @@
Similarly, if the power.use_autosuspend field isn't set then the autosuspend
helper functions will behave just like the non-autosuspend counterparts.
+Under some circumstances a driver or subsystem may want to prevent a device
+from autosuspending immediately, even though the usage counter is zero and the
+autosuspend delay time has expired. If the ->runtime_suspend() callback
+returns -EAGAIN or -EBUSY, and if the next autosuspend delay expiration time is
+in the future (as it normally would be if the callback invoked
+pm_runtime_mark_last_busy()), the PM core will automatically reschedule the
+autosuspend. The ->runtime_suspend() callback can't do this rescheduling
+itself because no suspend requests of any kind are accepted while the device is
+suspending (i.e., while the callback is running).
+
The implementation is well suited for asynchronous use in interrupt contexts.
However such use inevitably involves races, because the PM core can't
synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt
index 60a6f65..39ddcdb 100644
--- a/Documentation/serial/computone.txt
+++ b/Documentation/serial/computone.txt
@@ -20,8 +20,6 @@
Date: 11/01/2001
Historical Author: Andrew Manison <amanison@america.net>
Primary Author: Doug McNash
-Support: support@computone.com
-Fixes and Updates: Mike Warfield <mhw@wittsend.com>
This file assumes that you are using the Computone drivers which are
integrated into the kernel sources. For updating the drivers or installing
diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.txt b/Documentation/watchdog/convert_drivers_to_kernel_api.txt
new file mode 100644
index 0000000..ae1e900
--- /dev/null
+++ b/Documentation/watchdog/convert_drivers_to_kernel_api.txt
@@ -0,0 +1,195 @@
+Converting old watchdog drivers to the watchdog framework
+by Wolfram Sang <w.sang@pengutronix.de>
+=========================================================
+
+Before the watchdog framework came into the kernel, every driver had to
+implement the API on its own. Now, as the framework factored out the common
+components, those drivers can be lightened making it a user of the framework.
+This document shall guide you for this task. The necessary steps are described
+as well as things to look out for.
+
+
+Remove the file_operations struct
+---------------------------------
+
+Old drivers define their own file_operations for actions like open(), write(),
+etc... These are now handled by the framework and just call the driver when
+needed. So, in general, the 'file_operations' struct and assorted functions can
+go. Only very few driver-specific details have to be moved to other functions.
+Here is a overview of the functions and probably needed actions:
+
+- open: Everything dealing with resource management (file-open checks, magic
+ close preparations) can simply go. Device specific stuff needs to go to the
+ driver specific start-function. Note that for some drivers, the start-function
+ also serves as the ping-function. If that is the case and you need start/stop
+ to be balanced (clocks!), you are better off refactoring a separate start-function.
+
+- close: Same hints as for open apply.
+
+- write: Can simply go, all defined behaviour is taken care of by the framework,
+ i.e. ping on write and magic char ('V') handling.
+
+- ioctl: While the driver is allowed to have extensions to the IOCTL interface,
+ the most common ones are handled by the framework, supported by some assistance
+ from the driver:
+
+ WDIOC_GETSUPPORT:
+ Returns the mandatory watchdog_info struct from the driver
+
+ WDIOC_GETSTATUS:
+ Needs the status-callback defined, otherwise returns 0
+
+ WDIOC_GETBOOTSTATUS:
+ Needs the bootstatus member properly set. Make sure it is 0 if you
+ don't have further support!
+
+ WDIOC_SETOPTIONS:
+ No preparations needed
+
+ WDIOC_KEEPALIVE:
+ If wanted, options in watchdog_info need to have WDIOF_KEEPALIVEPING
+ set
+
+ WDIOC_SETTIMEOUT:
+ Options in watchdog_info need to have WDIOF_SETTIMEOUT set
+ and a set_timeout-callback has to be defined. The core will also
+ do limit-checking, if min_timeout and max_timeout in the watchdog
+ device are set. All is optional.
+
+ WDIOC_GETTIMEOUT:
+ No preparations needed
+
+ Other IOCTLs can be served using the ioctl-callback. Note that this is mainly
+ intended for porting old drivers; new drivers should not invent private IOCTLs.
+ Private IOCTLs are processed first. When the callback returns with
+ -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error
+ is directly given to the user.
+
+Example conversion:
+
+-static const struct file_operations s3c2410wdt_fops = {
+- .owner = THIS_MODULE,
+- .llseek = no_llseek,
+- .write = s3c2410wdt_write,
+- .unlocked_ioctl = s3c2410wdt_ioctl,
+- .open = s3c2410wdt_open,
+- .release = s3c2410wdt_release,
+-};
+
+Check the functions for device-specific stuff and keep it for later
+refactoring. The rest can go.
+
+
+Remove the miscdevice
+---------------------
+
+Since the file_operations are gone now, you can also remove the 'struct
+miscdevice'. The framework will create it on watchdog_dev_register() called by
+watchdog_register_device().
+
+-static struct miscdevice s3c2410wdt_miscdev = {
+- .minor = WATCHDOG_MINOR,
+- .name = "watchdog",
+- .fops = &s3c2410wdt_fops,
+-};
+
+
+Remove obsolete includes and defines
+------------------------------------
+
+Because of the simplifications, a few defines are probably unused now. Remove
+them. Includes can be removed, too. For example:
+
+- #include <linux/fs.h>
+- #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
+- #include <linux/uaccess.h> (if no custom IOCTLs are used)
+
+
+Add the watchdog operations
+---------------------------
+
+All possible callbacks are defined in 'struct watchdog_ops'. You can find it
+explained in 'watchdog-kernel-api.txt' in this directory. start(), stop() and
+owner must be set, the rest are optional. You will easily find corresponding
+functions in the old driver. Note that you will now get a pointer to the
+watchdog_device as a parameter to these functions, so you probably have to
+change the function header. Other changes are most likely not needed, because
+here simply happens the direct hardware access. If you have device-specific
+code left from the above steps, it should be refactored into these callbacks.
+
+Here is a simple example:
+
++static struct watchdog_ops s3c2410wdt_ops = {
++ .owner = THIS_MODULE,
++ .start = s3c2410wdt_start,
++ .stop = s3c2410wdt_stop,
++ .ping = s3c2410wdt_keepalive,
++ .set_timeout = s3c2410wdt_set_heartbeat,
++};
+
+A typical function-header change looks like:
+
+-static void s3c2410wdt_keepalive(void)
++static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
+ {
+...
++
++ return 0;
+ }
+
+...
+
+- s3c2410wdt_keepalive();
++ s3c2410wdt_keepalive(&s3c2410_wdd);
+
+
+Add the watchdog device
+-----------------------
+
+Now we need to create a 'struct watchdog_device' and populate it with the
+necessary information for the framework. The struct is also explained in detail
+in 'watchdog-kernel-api.txt' in this directory. We pass it the mandatory
+watchdog_info struct and the newly created watchdog_ops. Often, old drivers
+have their own record-keeping for things like bootstatus and timeout using
+static variables. Those have to be converted to use the members in
+watchdog_device. Note that the timeout values are unsigned int. Some drivers
+use signed int, so this has to be converted, too.
+
+Here is a simple example for a watchdog device:
+
++static struct watchdog_device s3c2410_wdd = {
++ .info = &s3c2410_wdt_ident,
++ .ops = &s3c2410wdt_ops,
++};
+
+
+Register the watchdog device
+----------------------------
+
+Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev).
+Make sure the return value gets checked and the error message, if present,
+still fits. Also convert the unregister case.
+
+- ret = misc_register(&s3c2410wdt_miscdev);
++ ret = watchdog_register_device(&s3c2410_wdd);
+
+...
+
+- misc_deregister(&s3c2410wdt_miscdev);
++ watchdog_unregister_device(&s3c2410_wdd);
+
+
+Update the Kconfig-entry
+------------------------
+
+The entry for the driver now needs to select WATCHDOG_CORE:
+
++ select WATCHDOG_CORE
+
+
+Create a patch and send it to upstream
+--------------------------------------
+
+Make sure you understood Documentation/SubmittingPatches and send your patch to
+linux-watchdog@vger.kernel.org. We are looking forward to it :)
+
diff --git a/MAINTAINERS b/MAINTAINERS
index ab77670..6388a96 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1716,6 +1716,7 @@
F: include/linux/can/core.h
F: include/linux/can/bcm.h
F: include/linux/can/raw.h
+F: include/linux/can/gw.h
CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
@@ -2386,7 +2387,7 @@
F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
-M: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M: Tyler Hicks <tyhicks@canonical.com>
M: Dustin Kirkland <kirkland@canonical.com>
L: ecryptfs@vger.kernel.org
W: https://launchpad.net/ecryptfs
@@ -4476,11 +4477,9 @@
F: drivers/net/ethernet/neterion/
NETFILTER/IPTABLES/IPCHAINS
-P: Rusty Russell
-P: Marc Boucher
-P: James Morris
P: Harald Welte
P: Jozsef Kadlecsik
+M: Pablo Neira Ayuso <pablo@netfilter.org>
M: Patrick McHardy <kaber@trash.net>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe6b052..44789ef 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -595,6 +595,7 @@
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
+ select GENERIC_ALLOCATOR
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
@@ -769,6 +770,7 @@
select CPU_V6
select ARM_VIC
select HAVE_CLK
+ select HAVE_TCM
select CLKDEV_LOOKUP
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
@@ -777,9 +779,6 @@
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
@@ -838,8 +837,8 @@
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS4
- bool "Samsung EXYNOS4"
+config ARCH_EXYNOS
+ bool "SAMSUNG EXYNOS"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -853,7 +852,7 @@
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_MEMORY_H
help
- Samsung EXYNOS4 series based systems
+ Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
config ARCH_SHARK
bool "Shark"
@@ -1080,7 +1079,7 @@
source "arch/arm/mach-s5pv210/Kconfig"
-source "arch/arm/mach-exynos4/Kconfig"
+source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
@@ -2212,7 +2211,7 @@
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5P64X0 && !ARCH_S5PC100
+ depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b7c2d37..dfcf3b0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,7 +180,7 @@
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
+machine-$(CONFIG_ARCH_EXYNOS4) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index cd40bb5..bffe68e 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -4,19 +4,18 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS4=y
+CONFIG_ARCH_EXYNOS=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_SMDKV310=y
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
CONFIG_MACH_ORIGEN=y
+CONFIG_MACH_SMDK4412=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -61,13 +60,9 @@
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
CONFIG_CRC_CCITT=y
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index e4a04e4..33c78d7 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -21,6 +21,9 @@
* OneNAND features.
*/
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
#define PL080_INT_STATUS (0x00)
#define PL080_TC_STATUS (0x04)
#define PL080_TC_CLEAR (0x08)
@@ -138,3 +141,4 @@
u32 control1;
};
+#endif /* ASM_PL080_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbaae47..960e9de 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -15,6 +15,8 @@
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
/* The inline versions use the static inlines in the driver header */
#include "gpio-davinci.h"
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos/Kconfig
similarity index 75%
rename from arch/arm/mach-exynos4/Kconfig
rename to arch/arm/mach-exynos/Kconfig
index a652735..724ec0f 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -1,4 +1,4 @@
-# arch/arm/mach-exynos4/Kconfig
+# arch/arm/mach-exynos/Kconfig
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
@@ -7,22 +7,47 @@
# Configuration options for the EXYNOS4
-if ARCH_EXYNOS4
+if ARCH_EXYNOS
+
+menu "SAMSUNG EXYNOS SoCs Support"
+
+choice
+ prompt "EXYNOS System Type"
+ default ARCH_EXYNOS4
+
+config ARCH_EXYNOS4
+ bool "SAMSUNG EXYNOS4"
+ help
+ Samsung EXYNOS4 SoCs based systems
+
+endchoice
+
+comment "EXYNOS SoCs"
config CPU_EXYNOS4210
- bool
- select S3C_PL330_DMA
+ bool "SAMSUNG EXYNOS4210"
+ default y
+ depends on ARCH_EXYNOS4
+ select SAMSUNG_DMADEV
select ARM_CPU_SUSPEND if PM
+ select S5P_PM if PM
+ select S5P_SLEEP if PM
help
Enable EXYNOS4210 CPU support
config SOC_EXYNOS4212
- bool
+ bool "SAMSUNG EXYNOS4212"
+ default y
+ depends on ARCH_EXYNOS4
+ select S5P_PM if PM
+ select S5P_SLEEP if PM
help
Enable EXYNOS4212 SoC support
config SOC_EXYNOS4412
- bool
+ bool "SAMSUNG EXYNOS4412"
+ default y
+ depends on ARCH_EXYNOS4
help
Enable EXYNOS4412 SoC support
@@ -120,7 +145,7 @@
# machine support
-menu "EXYNOS4 Machines"
+if ARCH_EXYNOS4
comment "EXYNOS4210 Boards"
@@ -137,6 +162,14 @@
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_MFC
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
@@ -151,6 +184,7 @@
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung SMDKV310
@@ -176,19 +210,26 @@
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_MFC
select S5P_DEV_ONENAND
+ select S5P_DEV_TV
select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_FIMC
+ select S5P_SETUP_MIPIPHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -196,21 +237,33 @@
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
+ select S5P_GPIO_INT
select S3C_DEV_WDT
+ select S3C_DEV_RTC
+ select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
+ select S5P_SETUP_MIPIPHY
select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMC
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
+ select S5P_SETUP_MIPIPHY
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_ADC
help
@@ -221,8 +274,23 @@
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_MFC
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for ORIGEN based on Samsung EXYNOS4210
@@ -257,12 +325,11 @@
select MACH_SMDK4212
help
Machine support for Samsung SMDK4412
+endif
-endmenu
+if ARCH_EXYNOS4
-comment "Configuration for HSMMC bus width"
-
-menu "Use 8-bit bus width"
+comment "Configuration for HSMMC 8-bit bus width"
config EXYNOS4_SDHCI_CH0_8BIT
bool "Channel 0 with 8-bit bus"
@@ -275,6 +342,7 @@
help
Support HSMMC Channel 2 8-bit bus.
If selected, Channel 3 is disabled.
+endif
endmenu
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos/Makefile
similarity index 88%
rename from arch/arm/mach-exynos4/Makefile
rename to arch/arm/mach-exynos/Makefile
index c9b2e1f..59069a3 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -1,4 +1,4 @@
-# arch/arm/mach-exynos4/Makefile
+# arch/arm/mach-exynos/Makefile
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
@@ -12,11 +12,11 @@
# Core support for EXYNOS4 system
-obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
@@ -39,11 +39,11 @@
# device support
-obj-y += dev-audio.o
+obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
-obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
@@ -57,5 +57,4 @@
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
similarity index 100%
rename from arch/arm/mach-exynos4/Makefile.boot
rename to arch/arm/mach-exynos/Makefile.boot
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
similarity index 100%
rename from arch/arm/mach-exynos4/clock-exynos4210.c
rename to arch/arm/mach-exynos/clock-exynos4210.c
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
similarity index 100%
rename from arch/arm/mach-exynos4/clock-exynos4212.c
rename to arch/arm/mach-exynos/clock-exynos4212.c
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos/clock.c
similarity index 86%
rename from arch/arm/mach-exynos4/clock.c
rename to arch/arm/mach-exynos/clock.c
index 0d59be3..2894f0a 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -111,6 +111,11 @@
.name = "sclk_usbphy1",
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -146,6 +151,11 @@
return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
}
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -186,6 +196,16 @@
return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
}
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk clk_mout_apll = {
@@ -503,13 +523,43 @@
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.0",
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hdmiphy",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.1",
+ .name = "dma",
+ .devname = "dma-pl330.1",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 1),
}, {
@@ -630,6 +680,12 @@
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 13),
}, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
.name = "SYSMMU_MDMA",
.enable = exynos4_clk_ip_image_ctrl,
.ctrlbit = (1 << 5),
@@ -831,6 +887,81 @@
.nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
};
+static struct clk *clkset_sclk_dac_list[] = {
+ [0] = &clk_sclk_vpll.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+ .sources = clkset_sclk_dac_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+ .clk = {
+ .name = "sclk_dac",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_sclk_dac,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+ [0] = &clk_sclk_pixel.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+ .sources = clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_sclk_hdmi,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+ [0] = &clk_sclk_dac.clk,
+ [1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+ .sources = clkset_sclk_mixer_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
+ &clk_sclk_mixer,
+};
+
static struct clksrc_clk clk_dout_mmc0 = {
.clk = {
.name = "dout_mmc0",
@@ -1157,6 +1288,71 @@
.get_rate = exynos4_fout_apll_get_rate,
};
+static u32 vpll_div[][8] = {
+ { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
+ { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con0, vpll_con1 = 0;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+ vpll_con0 &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+ vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
+ PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
+ PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+ if (vpll_div[i][0] == rate) {
+ vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+ vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+ vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+ vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+ vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+ vpll_con0 |= vpll_div[i][7] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con0, S5P_VPLL_CON0);
+ __raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+ .get_rate = exynos4_vpll_get_rate,
+ .set_rate = exynos4_vpll_set_rate,
+};
+
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -1214,6 +1410,7 @@
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &exynos4_vpll_ops;
clk_fout_vpll.rate = vpll;
printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1241,7 +1438,10 @@
}
static struct clk *clks[] __initdata = {
- /* Nothing here yet */
+ &clk_sclk_hdmi27m,
+ &clk_sclk_hdmiphy,
+ &clk_sclk_usbphy0,
+ &clk_sclk_usbphy1,
};
#ifdef CONFIG_PM_SLEEP
@@ -1275,6 +1475,9 @@
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+ s3c_register_clksrc(sclk_tv[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
@@ -1282,5 +1485,7 @@
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
register_syscore_ops(&exynos4_clock_syscore_ops);
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos/cpu.c
similarity index 90%
rename from arch/arm/mach-exynos4/cpu.c
rename to arch/arm/mach-exynos/cpu.c
index a348434..90ec247 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/cpu.c
+/* linux/arch/arm/mach-exynos/cpu.c
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
@@ -28,6 +28,7 @@
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/reset.h>
+#include <plat/tv-core.h>
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
@@ -39,28 +40,47 @@
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
/* Initial IO mappings */
-static struct map_desc exynos4_iodesc[] __initdata = {
+static struct map_desc exynos_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+ .pfn = __phys_to_pfn(EXYNOS_PA_SYSTIMER),
.length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_CMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
- .length = SZ_128K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
+ .pfn = __phys_to_pfn(EXYNOS_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
+ .pfn = __phys_to_pfn(EXYNOS_PA_COMBINER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
+ .length = SZ_128K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5P_VA_COREPERI_BASE,
.pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
.length = SZ_8K,
@@ -91,11 +111,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_SROMC,
.pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
.length = SZ_4K,
@@ -105,16 +120,6 @@
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
- .length = SZ_64K,
- .type = MT_DEVICE,
},
};
@@ -136,7 +141,7 @@
},
};
-static void exynos4_idle(void)
+static void exynos_idle(void)
{
if (!need_resched())
cpu_do_idle();
@@ -150,12 +155,13 @@
}
/*
- * exynos4_map_io
+ * exynos_map_io
*
* register the standard cpu IO areas
*/
void __init exynos4_map_io(void)
{
+ iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
@@ -182,6 +188,7 @@
s3c_i2c2_setname("s3c2440-i2c");
s5p_fb_setname(0, "exynos4-fb");
+ s5p_hdmi_setname("exynos4-hdmi");
}
void __init exynos4_init_clocks(int xtal)
@@ -248,7 +255,6 @@
{
return sysdev_class_register(&exynos4_sysclass);
}
-
core_initcall(exynos4_core_init);
#ifdef CONFIG_CACHE_L2X0
@@ -277,15 +283,16 @@
early_initcall(exynos4_l2x0_cache_init);
#endif
-int __init exynos4_init(void)
+int __init exynos_init(void)
{
- printk(KERN_INFO "EXYNOS4: Initializing architecture\n");
+ printk(KERN_INFO "EXYNOS: Initializing architecture\n");
/* set idle function */
- pm_idle = exynos4_idle;
+ pm_idle = exynos_idle;
/* set sw_reset function */
- s5p_reset_hook = exynos4_sw_reset;
+ if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
+ s5p_reset_hook = exynos4_sw_reset;
return sysdev_register(&exynos4_sysdev);
}
diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
similarity index 100%
rename from arch/arm/mach-exynos4/cpuidle.c
rename to arch/arm/mach-exynos/cpuidle.c
diff --git a/arch/arm/mach-exynos4/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-ahci.c
rename to arch/arm/mach-exynos/dev-ahci.c
diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-audio.c
rename to arch/arm/mach-exynos/dev-audio.c
diff --git a/arch/arm/mach-exynos4/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-dwmci.c
rename to arch/arm/mach-exynos/dev-dwmci.c
diff --git a/arch/arm/mach-exynos4/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-pd.c
rename to arch/arm/mach-exynos/dev-pd.c
diff --git a/arch/arm/mach-exynos4/dev-sysmmu.c b/arch/arm/mach-exynos/dev-sysmmu.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-sysmmu.c
rename to arch/arm/mach-exynos/dev-sysmmu.c
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
new file mode 100644
index 0000000..9667c61
--- /dev/null
+++ b/arch/arm/mach-exynos/dma.c
@@ -0,0 +1,250 @@
+/* linux/arch/arm/mach-exynos4/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+struct dma_pl330_peri pdma0_peri[28] = {
+ {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ },
+};
+
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
+};
+
+struct amba_device exynos4_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_pdma0_pdata,
+ },
+ .res = {
+ .start = EXYNOS4_PA_PDMA0,
+ .end = EXYNOS4_PA_PDMA0 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[25] = {
+ {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS5_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS5_TX,
+ .rqtype = MEMTODEV,
+ },
+};
+
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
+};
+
+struct amba_device exynos4_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_pdma1_pdata,
+ },
+ .res = {
+ .start = EXYNOS4_PA_PDMA1,
+ .end = EXYNOS4_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+static int __init exynos4_dma_init(void)
+{
+ amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(exynos4_dma_init);
diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos/headsmp.S
similarity index 100%
rename from arch/arm/mach-exynos4/headsmp.S
rename to arch/arm/mach-exynos/headsmp.S
diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos/hotplug.c
similarity index 100%
rename from arch/arm/mach-exynos4/hotplug.c
rename to arch/arm/mach-exynos/hotplug.c
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/debug-macro.S
rename to arch/arm/mach-exynos/include/mach/debug-macro.S
diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos/include/mach/dma.h
similarity index 89%
rename from arch/arm/mach-exynos4/include/mach/dma.h
rename to arch/arm/mach-exynos/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-exynos4/include/mach/dma.h
+++ b/arch/arm/mach-exynos/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-exynos4/include/mach/dwmci.h b/arch/arm/mach-exynos/include/mach/dwmci.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/dwmci.h
rename to arch/arm/mach-exynos/include/mach/dwmci.h
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/entry-macro.S
rename to arch/arm/mach-exynos/include/mach/entry-macro.S
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos/include/mach/exynos4-clock.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/exynos4-clock.h
rename to arch/arm/mach-exynos/include/mach/exynos4-clock.h
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/gpio.h
rename to arch/arm/mach-exynos/include/mach/gpio.h
diff --git a/arch/arm/mach-exynos4/include/mach/hardware.h b/arch/arm/mach-exynos/include/mach/hardware.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/hardware.h
rename to arch/arm/mach-exynos/include/mach/hardware.h
diff --git a/arch/arm/mach-exynos4/include/mach/io.h b/arch/arm/mach-exynos/include/mach/io.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/io.h
rename to arch/arm/mach-exynos/include/mach/io.h
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
similarity index 97%
rename from arch/arm/mach-exynos4/include/mach/irqs.h
rename to arch/arm/mach-exynos/include/mach/irqs.h
index 2d3f6bc..dfd4b7e 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -95,7 +95,11 @@
#define IRQ_2D IRQ_SPI(89)
#define IRQ_PCIE IRQ_SPI(90)
+#define IRQ_MIXER IRQ_SPI(91)
+#define IRQ_HDMI IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY IRQ_SPI(93)
#define IRQ_MFC IRQ_SPI(94)
+#define IRQ_SDO IRQ_SPI(95)
#define IRQ_AUDIO_SS IRQ_SPI(96)
#define IRQ_I2S0 IRQ_SPI(97)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
similarity index 87%
rename from arch/arm/mach-exynos4/include/mach/map.h
rename to arch/arm/mach-exynos/include/mach/map.h
index 9f97eb8..058541d 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/map.h
+/* linux/arch/arm/mach-exynos/include/mach/map.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
@@ -112,6 +112,12 @@
#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS4_PA_VP 0x12C00000
+#define EXYNOS4_PA_MIXER 0x12C10000
+#define EXYNOS4_PA_SDO 0x12C20000
+#define EXYNOS4_PA_HDMI 0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
+
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
#define EXYNOS4_PA_ADC 0x13910000
@@ -139,33 +145,45 @@
#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
-#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
-#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
+#define S3C_PA_UART EXYNOS4_PA_UART
#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
+#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2
#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
+#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
+#define S5P_PA_HDMI EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY
+#define S5P_PA_MFC EXYNOS4_PA_MFC
#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
-#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
+#define S5P_PA_MIXER EXYNOS4_PA_MIXER
#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
+#define S5P_PA_SDO EXYNOS4_PA_SDO
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
#define S5P_PA_SROMC EXYNOS4_PA_SROMC
-#define S5P_PA_MFC EXYNOS4_PA_MFC
#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
#define S5P_PA_TIMER EXYNOS4_PA_TIMER
-#define S5P_PA_EHCI EXYNOS4_PA_EHCI
+#define S5P_PA_VP EXYNOS4_PA_VP
+#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
+#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
-/* UART */
+#define EXYNOS_PA_COMBINER EXYNOS4_PA_COMBINER
+#define EXYNOS_PA_GIC_CPU EXYNOS4_PA_GIC_CPU
+#define EXYNOS_PA_GIC_DIST EXYNOS4_PA_GIC_DIST
+#define EXYNOS_PA_PMU EXYNOS4_PA_PMU
+#define EXYNOS_PA_SYSTIMER EXYNOS4_PA_SYSTIMER
-#define S3C_PA_UART EXYNOS4_PA_UART
+/* Compatibility UART */
+
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART0 S5P_PA_UART(0)
diff --git a/arch/arm/mach-exynos4/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/memory.h
rename to arch/arm/mach-exynos/include/mach/memory.h
diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
similarity index 89%
rename from arch/arm/mach-exynos4/include/mach/pm-core.h
rename to arch/arm/mach-exynos/include/mach/pm-core.h
index 1df3b81..9d8da51e3 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos/include/mach/pm-core.h
@@ -14,6 +14,10 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
#include <mach/regs-pmu.h>
static inline void s3c_pm_debug_init_uart(void)
@@ -53,7 +57,9 @@
/* nothing here yet */
}
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
{
/* nothing here yet */
}
+
+#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
similarity index 84%
rename from arch/arm/mach-exynos4/include/mach/pmu.h
rename to arch/arm/mach-exynos/include/mach/pmu.h
index a952904..632dd56 100644
--- a/arch/arm/mach-exynos4/include/mach/pmu.h
+++ b/arch/arm/mach-exynos/include/mach/pmu.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_PMU_H
#define __ASM_ARCH_PMU_H __FILE__
+#define PMU_TABLE_END NULL
+
enum sys_powerdown {
SYS_AFTR,
SYS_LPA,
@@ -20,6 +22,11 @@
NUM_SYS_POWERDOWN,
};
+struct exynos4_pmu_conf {
+ void __iomem *reg;
+ unsigned int val[NUM_SYS_POWERDOWN];
+};
+
extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-audss.h b/arch/arm/mach-exynos/include/mach/regs-audss.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-audss.h
rename to arch/arm/mach-exynos/include/mach/regs-audss.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-clock.h
rename to arch/arm/mach-exynos/include/mach/regs-clock.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-gpio.h
rename to arch/arm/mach-exynos/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-irq.h b/arch/arm/mach-exynos/include/mach/regs-irq.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-irq.h
rename to arch/arm/mach-exynos/include/mach/regs-irq.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-mct.h
rename to arch/arm/mach-exynos/include/mach/regs-mct.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mem.h b/arch/arm/mach-exynos/include/mach/regs-mem.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-mem.h
rename to arch/arm/mach-exynos/include/mach/regs-mem.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
similarity index 69%
rename from arch/arm/mach-exynos4/include/mach/regs-pmu.h
rename to arch/arm/mach-exynos/include/mach/regs-pmu.h
index cdf9b47..4fff8e9 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -25,9 +25,10 @@
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFI1 (1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM (1 << 18)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
#define S5P_USE_STANDBY_WFE1 (1 << 25)
-#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24))
+#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
#define S5P_SWRESET S5P_PMUREG(0x0400)
@@ -35,15 +36,17 @@
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
-#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE (1 << 0)
+#define S5P_HDMI_PHY_CONTROL S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE (1 << 0)
+
+#define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4)
#define S5P_MIPI_DPHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_SRESETN (1 << 1)
#define S5P_MIPI_DPHY_MRESETN (1 << 2)
-#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
#define S5P_INFORM0 S5P_PMUREG(0x0800)
#define S5P_INFORM1 S5P_PMUREG(0x0804)
#define S5P_INFORM2 S5P_PMUREG(0x0808)
@@ -76,7 +79,6 @@
#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
@@ -84,7 +86,6 @@
#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
@@ -92,14 +93,11 @@
#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
@@ -120,7 +118,6 @@
#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
@@ -156,7 +153,6 @@
#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40)
#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60)
#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
@@ -165,4 +161,60 @@
#define S5P_CHECK_SLEEP 0x00000BAD
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE (1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
+
#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
rename to arch/arm/mach-exynos/include/mach/regs-sysmmu.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
rename to arch/arm/mach-exynos/include/mach/regs-usb-phy.h
diff --git a/arch/arm/mach-exynos4/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/sysmmu.h
rename to arch/arm/mach-exynos/include/mach/sysmmu.h
diff --git a/arch/arm/mach-exynos4/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/system.h
rename to arch/arm/mach-exynos/include/mach/system.h
diff --git a/arch/arm/mach-exynos4/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/timex.h
rename to arch/arm/mach-exynos/include/mach/timex.h
diff --git a/arch/arm/mach-exynos4/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/uncompress.h
rename to arch/arm/mach-exynos/include/mach/uncompress.h
diff --git a/arch/arm/mach-exynos4/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/vmalloc.h
rename to arch/arm/mach-exynos/include/mach/vmalloc.h
diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos/init.c
similarity index 100%
rename from arch/arm/mach-exynos4/init.c
rename to arch/arm/mach-exynos/init.c
diff --git a/arch/arm/mach-exynos4/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
similarity index 100%
rename from arch/arm/mach-exynos4/irq-combiner.c
rename to arch/arm/mach-exynos/irq-combiner.c
diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
similarity index 100%
rename from arch/arm/mach-exynos4/irq-eint.c
rename to arch/arm/mach-exynos/irq-eint.c
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
similarity index 100%
rename from arch/arm/mach-exynos4/mach-armlex4210.c
rename to arch/arm/mach-exynos/mach-armlex4210.c
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
similarity index 85%
rename from arch/arm/mach-exynos4/mach-nuri.c
rename to arch/arm/mach-exynos/mach-nuri.c
index 6e05368..236bbe1 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -27,15 +27,20 @@
#include <linux/pwm_backlight.h>
#include <video/platform_lcd.h>
+#include <media/m5mols.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-mediabus.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/ehci.h>
#include <plat/clock.h>
@@ -43,6 +48,9 @@
#include <plat/iic.h>
#include <plat/mfc.h>
#include <plat/pd.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
#include <mach/map.h>
@@ -63,6 +71,8 @@
enum fixed_regulator_id {
FIXED_REG_ID_MMC = 0,
FIXED_REG_ID_MAX8903,
+ FIXED_REG_ID_CAM_A28V,
+ FIXED_REG_ID_CAM_12V,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -199,6 +209,33 @@
},
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+ .win_mode = {
+ .left_margin = 64,
+ .right_margin = 16,
+ .upper_margin = 64,
+ .lower_margin = 1,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .xres = 1280,
+ .yres = 800,
+ .refresh = 60,
+ },
+ .max_bpp = 24,
+ .default_bpp = 16,
+ .virtual_x = 1280,
+ .virtual_y = 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+ .win[0] = &nuri_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
{
int gpio = EXYNOS4_GPE1(5);
@@ -1037,13 +1074,6 @@
},
};
-static struct device *nuri_cm_devices[] = {
- &s3c_device_i2c5.dev,
- &s3c_device_adc.dev,
- NULL, /* Reserved for UART */
- NULL,
-};
-
static void __init nuri_power_init(void)
{
int gpio;
@@ -1088,10 +1118,141 @@
s5p_ehci_set_platdata(pdata);
}
+/* CAMERA */
+static struct regulator_consumer_supply cam_vdda_supply[] = {
+ REGULATOR_SUPPLY("a_sensor", "0-001f"),
+};
+
+static struct regulator_init_data cam_vdda_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
+ .consumer_supplies = cam_vdda_supply,
+};
+
+static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
+ .supply_name = "CAM_IO_EN",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */
+ .enable_high = 1,
+ .init_data = &cam_vdda_reg_init_data,
+};
+
+static struct platform_device cam_vdda_fixed_rdev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
+ .dev = { .platform_data = &cam_vdda_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply camera_8m_12v_supply =
+ REGULATOR_SUPPLY("dig_12", "0-001f");
+
+static struct regulator_init_data cam_8m_12v_reg_init_data = {
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &camera_8m_12v_supply,
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS
+ },
+};
+
+static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
+ .supply_name = "8M_1.2V",
+ .microvolts = 1200000,
+ .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
+ .enable_high = 1,
+ .init_data = &cam_8m_12v_reg_init_data,
+};
+
+static struct platform_device cam_8m_12v_fixed_rdev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
+ .dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+ .clk_rate = 166000000UL,
+ .lanes = 2,
+ .alignment = 32,
+ .hs_settle = 12,
+ .phy_enable = s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
+#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
+
+static struct m5mols_platform_data m5mols_platdata = {
+ .gpio_reset = GPIO_CAM_MEGA_RST,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+ I2C_BOARD_INFO("M5MOLS", 0x1F),
+ .platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
+ {
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_MIPI_CSI2,
+ .board_info = &m5mols_board_info,
+ .clk_frequency = 24000000UL,
+ .csi_data_align = 32,
+ },
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+ .isp_info = nuri_camera_sensors,
+ .num_clients = ARRAY_SIZE(nuri_camera_sensors),
+};
+
+static struct gpio nuri_camera_gpios[] = {
+ { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
+ { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void nuri_camera_init(void)
+{
+ s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+ &s5p_device_mipi_csis0);
+ s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ if (gpio_request_array(nuri_camera_gpios,
+ ARRAY_SIZE(nuri_camera_gpios))) {
+ pr_err("%s: GPIO request failed\n", __func__);
+ return;
+ }
+
+ m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
+ if (!IS_ERR_VALUE(m5mols_board_info.irq))
+ s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
+ else
+ pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
+
+ /* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_MEGA_RST);
+
+ if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
+ pr_err("%s: Camera port A setup failed\n", __func__);
+ return;
+ }
+ /* Increase drive strength of the sensor clock output */
+ s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
+static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
+ .frequency = 400000U,
+ .sda_delay = 200,
+};
+
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
&s3c_device_i2c5, /* PMIC should initialize first */
+ &s3c_device_i2c0,
&emmc_fixed_voltage,
+ &s5p_device_mipi_csis0,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &s5p_device_fimd0,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
@@ -1106,6 +1267,9 @@
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_CAM],
+ &s5p_device_fimc_md,
/* NURI Devices */
&nuri_gpio_keys,
@@ -1113,6 +1277,8 @@
&nuri_backlight_device,
&max8903_fixed_reg_dev,
&nuri_max8903_device,
+ &cam_vdda_fixed_rdev,
+ &cam_8m_12v_fixed_rdev,
};
static void __init nuri_map_io(void)
@@ -1133,6 +1299,7 @@
nuri_tsp_init();
nuri_power_init();
+ s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
@@ -1142,12 +1309,23 @@
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+ s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
+ nuri_camera_init();
+
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
new file mode 100644
index 0000000..f80b563
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -0,0 +1,700 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ * http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/platform_lcd.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
+#include <plat/mfc.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+};
+
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
+ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+ REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+ REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+ REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+ REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+ REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+ REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+ REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+ REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+ REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+ .constraints = {
+ .name = "VDD_ABB_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data = {
+ .constraints = {
+ .name = "VDD_ALIVE_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+ .constraints = {
+ .name = "VMIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
+ .consumer_supplies = ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+ .constraints = {
+ .name = "VDD_RTC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
+ .consumer_supplies = ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+ .constraints = {
+ .name = "VDD_AUD_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
+ .consumer_supplies = ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+ .constraints = {
+ .name = "VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
+ .consumer_supplies = ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+ .constraints = {
+ .name = "DVDD_SWB_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
+ .consumer_supplies = ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+ .constraints = {
+ .name = "VDD_PLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+ .constraints = {
+ .name = "VDD_AUD_3V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
+ .consumer_supplies = ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+ .constraints = {
+ .name = "AVDD18_SWB_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
+ .consumer_supplies = ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+ .constraints = {
+ .name = "VDD_SWB_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
+ .consumer_supplies = ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+ .constraints = {
+ .name = "VDD_MIF_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_1.2V",
+ .min_uV = 950000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
+ .consumer_supplies = buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_1.1V",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
+ .consumer_supplies = buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_1.1V",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
+ .consumer_supplies = buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+ .constraints = {
+ .name = "VDDQ_M1M2_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+ .constraints = {
+ .name = "VDD_LCD_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .boot_on = 1,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
+ .consumer_supplies = buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+ { MAX8997_LDO1, &max8997_ldo1_data },
+ { MAX8997_LDO2, &max8997_ldo2_data },
+ { MAX8997_LDO3, &max8997_ldo3_data },
+ { MAX8997_LDO4, &max8997_ldo4_data },
+ { MAX8997_LDO6, &max8997_ldo6_data },
+ { MAX8997_LDO7, &max8997_ldo7_data },
+ { MAX8997_LDO8, &max8997_ldo8_data },
+ { MAX8997_LDO9, &max8997_ldo9_data },
+ { MAX8997_LDO10, &max8997_ldo10_data },
+ { MAX8997_LDO11, &max8997_ldo11_data },
+ { MAX8997_LDO14, &max8997_ldo14_data },
+ { MAX8997_LDO17, &max8997_ldo17_data },
+ { MAX8997_LDO21, &max8997_ldo21_data },
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+ { MAX8997_BUCK5, &max8997_buck5_data },
+ { MAX8997_BUCK7, &max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+ .regulators = origen_max8997_regulators,
+
+ .wakeup = true,
+ .buck1_gpiodvs = false,
+ .buck2_gpiodvs = false,
+ .buck5_gpiodvs = false,
+ .irq_base = IRQ_GPIO_END + 1,
+
+ .ignore_gpiodvs_side_effect = true,
+ .buck125_default_idx = 0x0,
+
+ .buck125_gpios[0] = EXYNOS4_GPX0(0),
+ .buck125_gpios[1] = EXYNOS4_GPX0(1),
+ .buck125_gpios[2] = EXYNOS4_GPX0(2),
+
+ .buck1_voltage[0] = 1350000,
+ .buck1_voltage[1] = 1300000,
+ .buck1_voltage[2] = 1250000,
+ .buck1_voltage[3] = 1200000,
+ .buck1_voltage[4] = 1150000,
+ .buck1_voltage[5] = 1100000,
+ .buck1_voltage[6] = 1000000,
+ .buck1_voltage[7] = 950000,
+
+ .buck2_voltage[0] = 1100000,
+ .buck2_voltage[1] = 1100000,
+ .buck2_voltage[2] = 1100000,
+ .buck2_voltage[3] = 1100000,
+ .buck2_voltage[4] = 1000000,
+ .buck2_voltage[5] = 1000000,
+ .buck2_voltage[6] = 1000000,
+ .buck2_voltage[7] = 1000000,
+
+ .buck5_voltage[0] = 1200000,
+ .buck5_voltage[1] = 1200000,
+ .buck5_voltage[2] = 1200000,
+ .buck5_voltage[3] = 1200000,
+ .buck5_voltage[4] = 1200000,
+ .buck5_voltage[5] = 1200000,
+ .buck5_voltage[6] = 1200000,
+ .buck5_voltage[7] = 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+ .platform_data = &origen_max8997_pdata,
+ .irq = IRQ_EINT(4),
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+ {
+ .code = KEY_MENU,
+ .gpio = EXYNOS4_GPX1(5),
+ .desc = "gpio-keys: KEY_MENU",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_HOME,
+ .gpio = EXYNOS4_GPX1(6),
+ .desc = "gpio-keys: KEY_HOME",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_BACK,
+ .gpio = EXYNOS4_GPX1(7),
+ .desc = "gpio-keys: KEY_BACK",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_UP,
+ .gpio = EXYNOS4_GPX2(0),
+ .desc = "gpio-keys: KEY_UP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_DOWN,
+ .gpio = EXYNOS4_GPX2(1),
+ .desc = "gpio-keys: KEY_DOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+ .buttons = origen_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &origen_gpio_keys_data,
+ },
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+ int ret;
+
+ if (power)
+ ret = gpio_request_one(EXYNOS4_GPE3(4),
+ GPIOF_OUT_INIT_HIGH, "GPE3_4");
+ else
+ ret = gpio_request_one(EXYNOS4_GPE3(4),
+ GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+ gpio_free(EXYNOS4_GPE3(4));
+
+ if (ret)
+ pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+ .set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+ .win_mode = {
+ .left_margin = 64,
+ .right_margin = 16,
+ .upper_margin = 64,
+ .lower_margin = 16,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .xres = 1024,
+ .yres = 600,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+ .win[0] = &origen_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc0,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s5p_device_ehci,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &s5p_device_fimd0,
+ &s5p_device_hdmi,
+ &s5p_device_i2c_hdmiphy,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &s5p_device_mixer,
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_TV],
+ &exynos4_device_pd[PD_G3D],
+ &exynos4_device_pd[PD_LCD1],
+ &exynos4_device_pd[PD_CAM],
+ &exynos4_device_pd[PD_GPS],
+ &exynos4_device_pd[PD_MFC],
+ &origen_device_gpiokeys,
+ &origen_lcd_hv070wsa,
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(0),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+ .pwm_id = 0,
+ .pwm_period_ns = 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+ /* Direct HPD to HDMI chip */
+ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_power_init(void)
+{
+ gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+ s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+static void __init origen_machine_init(void)
+{
+ origen_power_init();
+
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+ /*
+ * Since sdhci instance 2 can contain a bootable media,
+ * sdhci instance 0 is registered after instance 2.
+ */
+ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+ origen_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
+ s5p_tv_setup();
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+
+ s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
+ platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+
+ samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+ /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = origen_map_io,
+ .init_machine = origen_machine_init,
+ .timer = &exynos4_timer,
+ .reserve = &origen_reserve,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
similarity index 100%
rename from arch/arm/mach-exynos4/mach-smdk4x12.c
rename to arch/arm/mach-exynos/mach-smdk4x12.c
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
similarity index 87%
rename from arch/arm/mach-exynos4/mach-smdkv310.c
rename to arch/arm/mach-exynos/mach-smdkv310.c
index 2c1a076..cec2afa 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -37,6 +37,9 @@
#include <plat/pd.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
#include <mach/map.h>
@@ -232,17 +235,36 @@
{I2C_BOARD_INFO("wm8994", 0x1a),},
};
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c1,
+ &s5p_device_i2c_hdmiphy,
&s3c_device_rtc,
&s3c_device_wdt,
+ &s5p_device_ehci,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
&exynos4_device_ac97,
&exynos4_device_i2s0,
&samsung_device_keypad,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
&exynos4_device_pd[PD_G3D],
&exynos4_device_pd[PD_LCD0],
@@ -258,6 +280,8 @@
&smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
+ &s5p_device_hdmi,
+ &s5p_device_mixer,
};
static void __init smdkv310_smsc911x_init(void)
@@ -294,6 +318,18 @@
.pwm_period_ns = 1000,
};
+static void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -301,6 +337,11 @@
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
+static void __init smdkv310_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init smdkv310_machine_init(void)
{
s3c_i2c1_set_platdata(NULL);
@@ -313,12 +354,19 @@
s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+ s5p_tv_setup();
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+ smdkv310_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(SMDKV310, "SMDKV310")
@@ -329,6 +377,7 @@
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
+ .reserve = &smdkv310_reserve,
MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
similarity index 67%
rename from arch/arm/mach-exynos4/mach-universal_c210.c
rename to arch/arm/mach-exynos/mach-universal_c210.c
index 2aac6f7..a2a177f 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -31,12 +32,21 @@
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
+#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
#include <mach/map.h>
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -110,6 +120,9 @@
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
.name = "VINT_1.1V",
@@ -153,6 +166,8 @@
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
@@ -181,6 +196,12 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
static struct regulator_init_data lp3974_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
@@ -192,6 +213,12 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+ .consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
};
static struct regulator_init_data lp3974_ldo4_data = {
@@ -205,6 +232,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+ .consumer_supplies = lp3974_ldo4_consumer,
};
static struct regulator_init_data lp3974_ldo5_data = {
@@ -233,6 +262,10 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
static struct regulator_init_data lp3974_ldo7_data = {
.constraints = {
.name = "VLCD+VMIPI_1.8V",
@@ -244,6 +277,12 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
+ .consumer_supplies = lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_init_data lp3974_ldo8_data = {
@@ -257,6 +296,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+ .consumer_supplies = lp3974_ldo8_consumer,
};
static struct regulator_init_data lp3974_ldo9_data = {
@@ -286,6 +327,9 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+ REGULATOR_SUPPLY("dig_28", "0-001f");
+
static struct regulator_init_data lp3974_ldo11_data = {
.constraints = {
.name = "CAM_AF_3.3V",
@@ -297,6 +341,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo11_consumer,
};
static struct regulator_init_data lp3974_ldo12_data = {
@@ -325,6 +371,9 @@
},
};
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+ REGULATOR_SUPPLY("dig_18", "0-001f");
+
static struct regulator_init_data lp3974_ldo14_data = {
.constraints = {
.name = "CAM_I_HOST_1.8V",
@@ -336,8 +385,14 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo14_consumer,
};
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+ REGULATOR_SUPPLY("dig_12", "0-001f");
+
static struct regulator_init_data lp3974_ldo15_data = {
.constraints = {
.name = "CAM_S_DIG+FM33_CORE_1.2V",
@@ -349,6 +404,12 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+ REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
static struct regulator_init_data lp3974_ldo16_data = {
@@ -362,6 +423,8 @@
.disabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
+ .consumer_supplies = lp3974_ldo16_consumer,
};
static struct regulator_init_data lp3974_ldo17_data = {
@@ -472,6 +535,43 @@
.wakeup = true,
};
+
+enum fixed_regulator_id {
+ FIXED_REG_ID_MMC0,
+ FIXED_REG_ID_HDMI_5V,
+ FIXED_REG_ID_CAM_S_IF,
+ FIXED_REG_ID_CAM_I_CORE,
+ FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+ REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "HDMI_5V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+ .supply_name = "HDMI_EN1",
+ .microvolts = 5000000,
+ .gpio = EXYNOS4_GPE0(1),
+ .enable_high = true,
+ .init_data = &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_HDMI_5V,
+ .dev = {
+ .platform_data = &hdmi_fixed_voltage_config,
+ },
+};
+
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
@@ -573,6 +673,11 @@
gpio_direction_output(gpio, 1);
}
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+ .frequency = 300 * 1000,
+ .sda_delay = 200,
+};
+
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
@@ -658,7 +763,7 @@
static struct platform_device mmc0_fixed_voltage = {
.name = "reg-fixed-voltage",
- .id = 0,
+ .id = FIXED_REG_ID_MMC0,
.dev = {
.platform_data = &mmc0_fixed_voltage_config,
},
@@ -692,18 +797,165 @@
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
- /* Camera, To be updated */
-};
-
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+ .win_mode = {
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 800,
+ .refresh = 55,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+ .win[0] = &universal_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+ | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+ REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+ .supply_name = "CAM_I_CORE_1.2V",
+ .microvolts = 1200000,
+ .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
+ .enable_high = 1,
+ .init_data = &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+ .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+ REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+ .supply_name = "CAM_S_IF_1.8V",
+ .microvolts = 1800000,
+ .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
+ .enable_high = 1,
+ .init_data = &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+ .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+ .clk_rate = 166000000UL,
+ .lanes = 2,
+ .alignment = 32,
+ .hs_settle = 12,
+ .phy_enable = s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+ gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+ return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+ .gpio_reset = GPIO_CAM_MEGA_nRST,
+ .reset_polarity = 0,
+ .set_power = m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+ I2C_BOARD_INFO("M5MOLS", 0x1F),
+ .platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_MIPI_CSI2,
+ .board_info = &m5mols_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 21600000UL,
+ .csi_data_align = 32,
+ },
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+ .isp_info = universal_camera_sensors,
+ .num_clients = ARRAY_SIZE(universal_camera_sensors),
+};
+
+static struct gpio universal_camera_gpios[] = {
+ { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+ { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
+ { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
+ { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+ s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+ &s5p_device_mipi_csis0);
+ s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ if (gpio_request_array(universal_camera_gpios,
+ ARRAY_SIZE(universal_camera_gpios))) {
+ pr_err("%s: GPIO request failed\n", __func__);
+ return;
+ }
+
+ if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+ m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+ else
+ pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+ /* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_MEGA_nRST);
+ gpio_free(GPIO_CAM_8M_ISP_INT);
+
+ if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+ pr_err("Camera port A setup failed\n");
+}
+
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s5p_device_mipi_csis0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
@@ -712,17 +964,30 @@
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
+ &s3c_device_i2c0,
&s3c_device_i2c3,
&s3c_device_i2c5,
+ &s5p_device_i2c_hdmiphy,
+ &hdmi_fixed_voltage,
+ &exynos4_device_pd[PD_TV],
+ &s5p_device_hdmi,
+ &s5p_device_sdo,
+ &s5p_device_mixer,
/* Universal Devices */
&i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
+ &s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_CAM],
+ &cam_i_core_fixed_reg_dev,
+ &cam_s_if_fixed_reg_dev,
+ &s5p_device_fimc_md,
};
static void __init universal_map_io(void)
@@ -732,6 +997,20 @@
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
+void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+ gpio_direction_input(EXYNOS4_GPX3(7));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
static void __init universal_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -740,8 +1019,9 @@
static void __init universal_machine_init(void)
{
universal_sdhci_init();
+ s5p_tv_setup();
- i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+ s3c_i2c0_set_platdata(&universal_i2c0_platdata);
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
universal_tsp_init();
@@ -749,15 +1029,28 @@
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
s3c_i2c5_set_platdata(NULL);
+ s5p_i2c_hdmiphy_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
universal_touchkey_init();
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
+ universal_camera_init();
+
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos/mct.c
similarity index 91%
rename from arch/arm/mach-exynos4/mct.c
rename to arch/arm/mach-exynos/mct.c
index f191608..97343df 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,7 +44,7 @@
char name[10];
};
-struct mct_clock_event_device mct_tick[NR_CPUS];
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
static void exynos4_mct_write(unsigned int value, void *addr)
{
@@ -302,7 +302,7 @@
static int exynos4_tick_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
+ struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_mct_tick_start(cycles, mevt);
@@ -312,7 +312,7 @@
static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
+ struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_mct_tick_stop(mevt);
@@ -376,14 +376,16 @@
static void exynos4_mct_tick_init(struct clock_event_device *evt)
{
+ struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
- mct_tick[cpu].evt = evt;
+ mevt = this_cpu_ptr(&percpu_mct_tick);
+ mevt->evt = evt;
- mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
- sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
+ mevt->base = EXYNOS4_MCT_L_BASE(cpu);
+ sprintf(mevt->name, "mct_tick%d", cpu);
- evt->name = mct_tick[cpu].name;
+ evt->name = mevt->name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_mode = exynos4_tick_set_mode;
@@ -398,21 +400,21 @@
clockevents_register_device(evt);
- exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
+ exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET);
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
- mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ mct_tick0_event_irq.dev_id = mevt;
evt->irq = IRQ_MCT_L0;
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
- mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ mct_tick1_event_irq.dev_id = mevt;
evt->irq = IRQ_MCT_L1;
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
} else {
- gic_enable_ppi(IRQ_MCT_LOCALTIMER);
+ enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
}
}
@@ -427,9 +429,11 @@
void local_timer_stop(struct clock_event_device *evt)
{
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
- disable_irq(evt->irq);
+ if (mct_int_type == MCT_INT_SPI)
+ disable_irq(evt->irq);
+ else
+ disable_percpu_irq(IRQ_MCT_LOCALTIMER);
}
-
#endif /* CONFIG_LOCAL_TIMERS */
static void __init exynos4_timer_resources(void)
@@ -438,6 +442,16 @@
mct_clk = clk_get(NULL, "xtal");
clk_rate = clk_get_rate(mct_clk);
+
+ if (mct_int_type == MCT_INT_PPI) {
+ int err;
+
+ err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+ exynos4_mct_tick_isr, "MCT",
+ &percpu_mct_tick);
+ WARN(err, "MCT: can't request IRQ %d (%d)\n",
+ IRQ_MCT_LOCALTIMER, err);
+ }
}
static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos/platsmp.c
similarity index 99%
rename from arch/arm/mach-exynos4/platsmp.c
rename to arch/arm/mach-exynos/platsmp.c
index 0559540..69ffb2f 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -110,8 +110,6 @@
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
-
- set_cpu_online(cpu, true);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos/pm.c
similarity index 98%
rename from arch/arm/mach-exynos4/pm.c
rename to arch/arm/mach-exynos/pm.c
index 62e4f43..509a435 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -339,6 +339,13 @@
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (soc_is_exynos4212()) {
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+ tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+ S5P_USE_STANDBYWFE_ISP_ARM);
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+ }
+
/* Save Power control register */
asm ("mrc p15, 0, %0, c15, c0, 0"
: "=r" (tmp) : : "cc");
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
new file mode 100644
index 0000000..bba48f5
--- /dev/null
+++ b/arch/arm/mach-exynos/pmu.c
@@ -0,0 +1,230 @@
+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+ /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } },
+ /* XXX_OPTION register should be set other field */
+ { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } },
+ { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+ unsigned int i;
+
+ for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+ __raw_writel(exynos4_pmu_config[i].val[mode],
+ exynos4_pmu_config[i].reg);
+}
+
+static int __init exynos4_pmu_init(void)
+{
+ exynos4_pmu_config = exynos4210_pmu_config;
+
+ if (soc_is_exynos4210()) {
+ exynos4_pmu_config = exynos4210_pmu_config;
+ pr_info("EXYNOS4210 PMU Initialize\n");
+ } else if (soc_is_exynos4212()) {
+ exynos4_pmu_config = exynos4212_pmu_config;
+ pr_info("EXYNOS4212 PMU Initialize\n");
+ } else {
+ pr_info("EXYNOS4: PMU not supported\n");
+ }
+
+ return 0;
+}
+arch_initcall(exynos4_pmu_init);
diff --git a/arch/arm/mach-exynos4/setup-fimc.c b/arch/arm/mach-exynos/setup-fimc.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-fimc.c
rename to arch/arm/mach-exynos/setup-fimc.c
diff --git a/arch/arm/mach-exynos4/setup-fimd0.c b/arch/arm/mach-exynos/setup-fimd0.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-fimd0.c
rename to arch/arm/mach-exynos/setup-fimd0.c
diff --git a/arch/arm/mach-exynos4/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c0.c
rename to arch/arm/mach-exynos/setup-i2c0.c
diff --git a/arch/arm/mach-exynos4/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c1.c
rename to arch/arm/mach-exynos/setup-i2c1.c
diff --git a/arch/arm/mach-exynos4/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c2.c
rename to arch/arm/mach-exynos/setup-i2c2.c
diff --git a/arch/arm/mach-exynos4/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c3.c
rename to arch/arm/mach-exynos/setup-i2c3.c
diff --git a/arch/arm/mach-exynos4/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c4.c
rename to arch/arm/mach-exynos/setup-i2c4.c
diff --git a/arch/arm/mach-exynos4/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c5.c
rename to arch/arm/mach-exynos/setup-i2c5.c
diff --git a/arch/arm/mach-exynos4/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c6.c
rename to arch/arm/mach-exynos/setup-i2c6.c
diff --git a/arch/arm/mach-exynos4/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c7.c
rename to arch/arm/mach-exynos/setup-i2c7.c
diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos/setup-keypad.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-keypad.c
rename to arch/arm/mach-exynos/setup-keypad.c
diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-sdhci-gpio.c
rename to arch/arm/mach-exynos/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-exynos/setup-sdhci.c b/arch/arm/mach-exynos/setup-sdhci.c
new file mode 100644
index 0000000..92937b4
--- /dev/null
+++ b/arch/arm/mach-exynos/setup-sdhci.c
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-exynos4/setup-sdhci.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *exynos4_hsmmc_clksrcs[4] = {
+ [0] = NULL,
+ [1] = NULL,
+ [2] = "sclk_mmc", /* mmc_bus */
+ [3] = NULL,
+};
diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-usb-phy.c
rename to arch/arm/mach-exynos/setup-usb-phy.c
diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
deleted file mode 100644
index 564bb53..0000000
--- a/arch/arm/mach-exynos4/dma.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource exynos4_pdma0_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
- .peri = {
- [0] = DMACH_PCM0_RX,
- [1] = DMACH_PCM0_TX,
- [2] = DMACH_PCM2_RX,
- [3] = DMACH_PCM2_TX,
- [4] = DMACH_MSM_REQ0,
- [5] = DMACH_MSM_REQ2,
- [6] = DMACH_SPI0_RX,
- [7] = DMACH_SPI0_TX,
- [8] = DMACH_SPI2_RX,
- [9] = DMACH_SPI2_TX,
- [10] = DMACH_I2S0S_TX,
- [11] = DMACH_I2S0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S2_RX,
- [14] = DMACH_I2S2_TX,
- [15] = DMACH_UART0_RX,
- [16] = DMACH_UART0_TX,
- [17] = DMACH_UART2_RX,
- [18] = DMACH_UART2_TX,
- [19] = DMACH_UART4_RX,
- [20] = DMACH_UART4_TX,
- [21] = DMACH_SLIMBUS0_RX,
- [22] = DMACH_SLIMBUS0_TX,
- [23] = DMACH_SLIMBUS2_RX,
- [24] = DMACH_SLIMBUS2_TX,
- [25] = DMACH_SLIMBUS4_RX,
- [26] = DMACH_SLIMBUS4_TX,
- [27] = DMACH_AC97_MICIN,
- [28] = DMACH_AC97_PCMIN,
- [29] = DMACH_AC97_PCMOUT,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
-};
-
-static struct platform_device exynos4_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(exynos4_pdma0_resource),
- .resource = exynos4_pdma0_resource,
- .dev = {
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
-};
-
-static struct resource exynos4_pdma1_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
- .peri = {
- [0] = DMACH_PCM0_RX,
- [1] = DMACH_PCM0_TX,
- [2] = DMACH_PCM1_RX,
- [3] = DMACH_PCM1_TX,
- [4] = DMACH_MSM_REQ1,
- [5] = DMACH_MSM_REQ3,
- [6] = DMACH_SPI1_RX,
- [7] = DMACH_SPI1_TX,
- [8] = DMACH_I2S0S_TX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S1_RX,
- [12] = DMACH_I2S1_TX,
- [13] = DMACH_UART0_RX,
- [14] = DMACH_UART0_TX,
- [15] = DMACH_UART1_RX,
- [16] = DMACH_UART1_TX,
- [17] = DMACH_UART3_RX,
- [18] = DMACH_UART3_TX,
- [19] = DMACH_SLIMBUS1_RX,
- [20] = DMACH_SLIMBUS1_TX,
- [21] = DMACH_SLIMBUS3_RX,
- [22] = DMACH_SLIMBUS3_TX,
- [23] = DMACH_SLIMBUS5_RX,
- [24] = DMACH_SLIMBUS5_TX,
- [25] = DMACH_SLIMBUS0AUX_RX,
- [26] = DMACH_SLIMBUS0AUX_TX,
- [27] = DMACH_SPDIF,
- [28] = DMACH_MAX,
- [29] = DMACH_MAX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
-};
-
-static struct platform_device exynos4_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(exynos4_pdma1_resource),
- .resource = exynos4_pdma1_resource,
- .dev = {
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
- &exynos4_device_pdma0,
- &exynos4_device_pdma1,
-};
-
-static int __init exynos4_dma_init(void)
-{
- platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
-
- return 0;
-}
-arch_initcall(exynos4_dma_init);
diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-exynos4/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
deleted file mode 100644
index b5f6f38..0000000
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- * http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct platform_device *origen_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_rtc,
- &s3c_device_wdt,
-};
-
-static void __init origen_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
-}
-
-static void __init origen_machine_init(void)
-{
- s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
- platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
- /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = origen_map_io,
- .init_machine = origen_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
deleted file mode 100644
index 7ea9eb2..0000000
--- a/arch/arm/mach-exynos4/pmu.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* linux/arch/arm/mach-exynos4/pmu.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4210 - CPU PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <mach/regs-clock.h>
-#include <mach/pmu.h>
-
-static void __iomem *sys_powerdown_reg[] = {
- S5P_ARM_CORE0_LOWPWR,
- S5P_DIS_IRQ_CORE0,
- S5P_DIS_IRQ_CENTRAL0,
- S5P_ARM_CORE1_LOWPWR,
- S5P_DIS_IRQ_CORE1,
- S5P_DIS_IRQ_CENTRAL1,
- S5P_ARM_COMMON_LOWPWR,
- S5P_L2_0_LOWPWR,
- S5P_L2_1_LOWPWR,
- S5P_CMU_ACLKSTOP_LOWPWR,
- S5P_CMU_SCLKSTOP_LOWPWR,
- S5P_CMU_RESET_LOWPWR,
- S5P_APLL_SYSCLK_LOWPWR,
- S5P_MPLL_SYSCLK_LOWPWR,
- S5P_VPLL_SYSCLK_LOWPWR,
- S5P_EPLL_SYSCLK_LOWPWR,
- S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
- S5P_CMU_RESET_GPSALIVE_LOWPWR,
- S5P_CMU_CLKSTOP_CAM_LOWPWR,
- S5P_CMU_CLKSTOP_TV_LOWPWR,
- S5P_CMU_CLKSTOP_MFC_LOWPWR,
- S5P_CMU_CLKSTOP_G3D_LOWPWR,
- S5P_CMU_CLKSTOP_LCD0_LOWPWR,
- S5P_CMU_CLKSTOP_LCD1_LOWPWR,
- S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
- S5P_CMU_CLKSTOP_GPS_LOWPWR,
- S5P_CMU_RESET_CAM_LOWPWR,
- S5P_CMU_RESET_TV_LOWPWR,
- S5P_CMU_RESET_MFC_LOWPWR,
- S5P_CMU_RESET_G3D_LOWPWR,
- S5P_CMU_RESET_LCD0_LOWPWR,
- S5P_CMU_RESET_LCD1_LOWPWR,
- S5P_CMU_RESET_MAUDIO_LOWPWR,
- S5P_CMU_RESET_GPS_LOWPWR,
- S5P_TOP_BUS_LOWPWR,
- S5P_TOP_RETENTION_LOWPWR,
- S5P_TOP_PWR_LOWPWR,
- S5P_LOGIC_RESET_LOWPWR,
- S5P_ONENAND_MEM_LOWPWR,
- S5P_MODIMIF_MEM_LOWPWR,
- S5P_G2D_ACP_MEM_LOWPWR,
- S5P_USBOTG_MEM_LOWPWR,
- S5P_HSMMC_MEM_LOWPWR,
- S5P_CSSYS_MEM_LOWPWR,
- S5P_SECSS_MEM_LOWPWR,
- S5P_PCIE_MEM_LOWPWR,
- S5P_SATA_MEM_LOWPWR,
- S5P_PAD_RETENTION_DRAM_LOWPWR,
- S5P_PAD_RETENTION_MAUDIO_LOWPWR,
- S5P_PAD_RETENTION_GPIO_LOWPWR,
- S5P_PAD_RETENTION_UART_LOWPWR,
- S5P_PAD_RETENTION_MMCA_LOWPWR,
- S5P_PAD_RETENTION_MMCB_LOWPWR,
- S5P_PAD_RETENTION_EBIA_LOWPWR,
- S5P_PAD_RETENTION_EBIB_LOWPWR,
- S5P_PAD_RETENTION_ISOLATION_LOWPWR,
- S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
- S5P_XUSBXTI_LOWPWR,
- S5P_XXTI_LOWPWR,
- S5P_EXT_REGULATOR_LOWPWR,
- S5P_GPIO_MODE_LOWPWR,
- S5P_GPIO_MODE_MAUDIO_LOWPWR,
- S5P_CAM_LOWPWR,
- S5P_TV_LOWPWR,
- S5P_MFC_LOWPWR,
- S5P_G3D_LOWPWR,
- S5P_LCD0_LOWPWR,
- S5P_LCD1_LOWPWR,
- S5P_MAUDIO_LOWPWR,
- S5P_GPS_LOWPWR,
- S5P_GPS_ALIVE_LOWPWR,
-};
-
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
- /* { AFTR, LPA, SLEEP }*/
- { 0, 0, 2 }, /* ARM_CORE0 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */
- { 0, 0, 2 }, /* ARM_CORE1 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */
- { 0, 0, 2 }, /* ARM_COMMON */
- { 2, 2, 3 }, /* ARM_CPU_L2_0 */
- { 2, 2, 3 }, /* ARM_CPU_L2_1 */
- { 1, 0, 0 }, /* CMU_ACLKSTOP */
- { 1, 0, 0 }, /* CMU_SCLKSTOP */
- { 1, 1, 0 }, /* CMU_RESET */
- { 1, 0, 0 }, /* APLL_SYSCLK */
- { 1, 0, 0 }, /* MPLL_SYSCLK */
- { 1, 0, 0 }, /* VPLL_SYSCLK */
- { 1, 1, 0 }, /* EPLL_SYSCLK */
- { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */
- { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */
- { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */
- { 1, 1, 0 }, /* CMU_CLKSTOP_TV */
- { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */
- { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */
- { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */
- { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */
- { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */
- { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */
- { 1, 1, 0 }, /* CMU_RESET_CAM */
- { 1, 1, 0 }, /* CMU_RESET_TV */
- { 1, 1, 0 }, /* CMU_RESET_MFC */
- { 1, 1, 0 }, /* CMU_RESET_G3D */
- { 1, 1, 0 }, /* CMU_RESET_LCD0 */
- { 1, 1, 0 }, /* CMU_RESET_LCD1 */
- { 1, 1, 0 }, /* CMU_RESET_MAUDIO */
- { 1, 1, 0 }, /* CMU_RESET_GPS */
- { 3, 0, 0 }, /* TOP_BUS */
- { 1, 0, 1 }, /* TOP_RETENTION */
- { 3, 0, 3 }, /* TOP_PWR */
- { 1, 1, 0 }, /* LOGIC_RESET */
- { 3, 0, 0 }, /* ONENAND_MEM */
- { 3, 0, 0 }, /* MODIMIF_MEM */
- { 3, 0, 0 }, /* G2D_ACP_MEM */
- { 3, 0, 0 }, /* USBOTG_MEM */
- { 3, 0, 0 }, /* HSMMC_MEM */
- { 3, 0, 0 }, /* CSSYS_MEM */
- { 3, 0, 0 }, /* SECSS_MEM */
- { 3, 0, 0 }, /* PCIE_MEM */
- { 3, 0, 0 }, /* SATA_MEM */
- { 1, 0, 0 }, /* PAD_RETENTION_DRAM */
- { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */
- { 1, 0, 0 }, /* PAD_RETENTION_GPIO */
- { 1, 0, 0 }, /* PAD_RETENTION_UART */
- { 1, 0, 0 }, /* PAD_RETENTION_MMCA */
- { 1, 0, 0 }, /* PAD_RETENTION_MMCB */
- { 1, 0, 0 }, /* PAD_RETENTION_EBIA */
- { 1, 0, 0 }, /* PAD_RETENTION_EBIB */
- { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */
- { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */
- { 1, 1, 0 }, /* XUSBXTI */
- { 1, 1, 0 }, /* XXTI */
- { 1, 1, 0 }, /* EXT_REGULATOR */
- { 1, 0, 0 }, /* GPIO_MODE */
- { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */
- { 7, 0, 0 }, /* CAM */
- { 7, 0, 0 }, /* TV */
- { 7, 0, 0 }, /* MFC */
- { 7, 0, 0 }, /* G3D */
- { 7, 0, 0 }, /* LCD0 */
- { 7, 0, 0 }, /* LCD1 */
- { 7, 7, 0 }, /* MAUDIO */
- { 7, 0, 0 }, /* GPS */
- { 7, 0, 0 }, /* GPS_ALIVE */
-};
-
-void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
-{
- unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
-
- for (; count > 0; count--)
- __raw_writel(sys_powerdown_val[count - 1][mode],
- sys_powerdown_reg[count - 1]);
-}
diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
deleted file mode 100644
index 1e83f8c..0000000
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *exynos4_hsmmc_clksrcs[4] = {
- [0] = NULL,
- [1] = NULL,
- [2] = "sclk_mmc", /* mmc_bus */
- [3] = NULL,
-};
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
- struct mmc_ios *ios, struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
- /* select base clock source to HCLK */
-
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
- /*
- * clear async mode, enable conflict mask, rx feedback ctrl, SD
- * clk hold and no use debounce count
- */
-
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- /* Tx and Rx feedback clock delay control */
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index cfa8417..ba232d7 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -293,8 +293,7 @@
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
- MC13783_USE_RTC,
+ .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
};
/* SPI */
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 60f1fda..b8c54b8 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -492,7 +492,7 @@
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_TOUCHSCREEN,
};
/* SPI */
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index c97c26d..05f1c71 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -112,8 +112,7 @@
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC |
- MC13XXX_USE_REGULATOR,
+ .flags = MC13XXX_USE_RTC,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index fff7791..07034f4 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -31,6 +31,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/input.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -225,7 +226,7 @@
},
};
-static struct mc13783_led_platform_data moboard_led[] = {
+static struct mc13xxx_led_platform_data moboard_led[] = {
{
.id = MC13783_LED_R1,
.name = "coreboard-led-4:red",
@@ -258,7 +259,7 @@
},
};
-static struct mc13783_leds_platform_data moboard_leds = {
+static struct mc13xxx_leds_platform_data moboard_leds = {
.num_leds = ARRAY_SIZE(moboard_led),
.led = moboard_led,
.flags = MC13783_LED_SLEWLIMTC,
@@ -267,14 +268,20 @@
.tc2_period = MC13783_LED_PERIOD_10MS,
};
+static struct mc13xxx_buttons_platform_data moboard_buttons = {
+ .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
+ MC13783_BUTTON_POL_INVERT,
+ .b1on_key = KEY_POWER,
+};
+
static struct mc13xxx_platform_data moboard_pmic = {
.regulators = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
},
.leds = &moboard_leds,
- .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
- MC13XXX_USE_ADC | MC13XXX_USE_LED,
+ .buttons = &moboard_buttons,
+ .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 100bc73..a17e9c7 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -268,8 +268,7 @@
.regulators = pcm038_regulators,
.num_regulators = ARRAY_SIZE(pcm038_regulators),
},
- .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
- MC13783_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8f948f9..ba254a7 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -7,7 +7,7 @@
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o
+obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o sram.o
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index e411252..983cfb1 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -185,6 +185,15 @@
| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
};
+static struct sram_platdata mmp2_asram_platdata = {
+ .pool_name = "asram",
+ .granularity = SRAM_GRANULARITY,
+};
+
+static struct sram_platdata mmp2_isram_platdata = {
+ .pool_name = "isram",
+ .granularity = SRAM_GRANULARITY,
+};
static void __init brownstone_init(void)
{
@@ -196,6 +205,8 @@
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
+ mmp2_add_asram(&mmp2_asram_platdata);
+ mmp2_add_isram(&mmp2_isram_platdata);
/* enable 5v regulator */
platform_device_register(&brownstone_v_5vp_device);
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index de7b888..2f7b2d3 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
+#include <mach/sram.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
@@ -28,6 +29,8 @@
extern struct pxa_device_desc mmp2_device_sdh1;
extern struct pxa_device_desc mmp2_device_sdh2;
extern struct pxa_device_desc mmp2_device_sdh3;
+extern struct pxa_device_desc mmp2_device_asram;
+extern struct pxa_device_desc mmp2_device_isram;
static inline int mmp2_add_uart(int id)
{
@@ -85,5 +88,15 @@
return pxa_register_device(d, data, sizeof(*data));
}
+static inline int mmp2_add_asram(struct sram_platdata *data)
+{
+ return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
+}
+
+static inline int mmp2_add_isram(struct sram_platdata *data)
+{
+ return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
+}
+
#endif /* __ASM_MACH_MMP2_H */
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
new file mode 100644
index 0000000..239e0fc
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/sram.h
@@ -0,0 +1,35 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ * SRAM Memory Management
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+enum sram_type {
+ MMP_SRAM_UNDEFINED = 0,
+ MMP_ASRAM,
+ MMP_ISRAM,
+};
+
+struct sram_platdata {
+ char *pool_name;
+ int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 7a7e8e4..5dd1d4a 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -226,4 +226,7 @@
MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
+MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
+/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
+MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
new file mode 100644
index 0000000..4304f95
--- /dev/null
+++ b/arch/arm/mach-mmp/sram.c
@@ -0,0 +1,168 @@
+/*
+ * linux/arch/arm/mach-mmp/sram.c
+ *
+ * based on mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ * All Rights Reserved
+ *
+ * Add for mmp sram support - Leo Yan <leoy@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/genalloc.h>
+
+#include <mach/sram.h>
+
+struct sram_bank_info {
+ char *pool_name;
+ struct gen_pool *gpool;
+ int granularity;
+
+ phys_addr_t sram_phys;
+ void __iomem *sram_virt;
+ u32 sram_size;
+
+ struct list_head node;
+};
+
+static DEFINE_MUTEX(sram_lock);
+static LIST_HEAD(sram_bank_list);
+
+struct gen_pool *sram_get_gpool(char *pool_name)
+{
+ struct sram_bank_info *info = NULL;
+
+ if (!pool_name)
+ return NULL;
+
+ mutex_lock(&sram_lock);
+
+ list_for_each_entry(info, &sram_bank_list, node)
+ if (!strcmp(pool_name, info->pool_name))
+ break;
+
+ mutex_unlock(&sram_lock);
+
+ if (&info->node == &sram_bank_list)
+ return NULL;
+
+ return info->gpool;
+}
+EXPORT_SYMBOL(sram_get_gpool);
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+ struct sram_platdata *pdata = pdev->dev.platform_data;
+ struct sram_bank_info *info;
+ struct resource *res;
+ int ret = 0;
+
+ if (!pdata && !pdata->pool_name)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!resource_size(res))
+ return 0;
+
+ info->sram_phys = (phys_addr_t)res->start;
+ info->sram_size = resource_size(res);
+ info->sram_virt = ioremap(info->sram_phys, info->sram_size);
+ info->pool_name = kstrdup(pdata->pool_name, GFP_KERNEL);
+ info->granularity = pdata->granularity;
+
+ info->gpool = gen_pool_create(ilog2(info->granularity), -1);
+ if (!info->gpool) {
+ dev_err(&pdev->dev, "create pool failed\n");
+ ret = -ENOMEM;
+ goto create_pool_err;
+ }
+
+ ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
+ info->sram_phys, info->sram_size, -1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "add new chunk failed\n");
+ ret = -ENOMEM;
+ goto add_chunk_err;
+ }
+
+ mutex_lock(&sram_lock);
+ list_add(&info->node, &sram_bank_list);
+ mutex_unlock(&sram_lock);
+
+ platform_set_drvdata(pdev, info);
+
+ dev_info(&pdev->dev, "initialized\n");
+ return 0;
+
+add_chunk_err:
+ gen_pool_destroy(info->gpool);
+create_pool_err:
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+out:
+ kfree(info);
+ return ret;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+ struct sram_bank_info *info;
+
+ info = platform_get_drvdata(pdev);
+ if (info == NULL)
+ return -ENODEV;
+
+ mutex_lock(&sram_lock);
+ list_del(&info->node);
+ mutex_unlock(&sram_lock);
+
+ gen_pool_destroy(info->gpool);
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+ kfree(info);
+ return 0;
+}
+
+static const struct platform_device_id sram_id_table[] = {
+ { "asram", MMP_ASRAM },
+ { "isram", MMP_ISRAM },
+ { }
+};
+
+static struct platform_driver sram_driver = {
+ .probe = sram_probe,
+ .remove = sram_remove,
+ .driver = {
+ .name = "mmp-sram",
+ },
+ .id_table = sram_id_table,
+};
+
+static int __init sram_init(void)
+{
+ return platform_driver_register(&sram_driver);
+}
+core_initcall(sram_init);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index b004e17..ec6ca91 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -565,7 +565,7 @@
};
static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+ .flags = MC13XXX_USE_RTC,
.regulators = {
.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
.regulators = mx51_efika_regulators,
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 497e9dc..5034147 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,7 +14,6 @@
select SERIAL_OMAP_CONSOLE
select I2C
select I2C_OMAP
- select MFD_SUPPORT
select MENELAUS if ARCH_OMAP2
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 70261bc..4a71cb7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -378,7 +378,8 @@
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
beagle_twldata.vpll2->constraints.name = "VDVI";
@@ -444,9 +445,15 @@
},
};
+static struct platform_device madc_hwmon = {
+ .name = "twl4030_madc_hwmon",
+ .id = -1,
+};
+
static struct platform_device *omap3_beagle_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
+ &madc_hwmon,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8e697dd..d82b7aa 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -144,7 +144,7 @@
INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
};
-void eseries_register_clks(void)
+static void __init eseries_register_clks(void)
{
clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
}
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
index be92196..b96949d 100644
--- a/arch/arm/mach-pxa/eseries.h
+++ b/arch/arm/mach-pxa/eseries.h
@@ -11,5 +11,4 @@
extern void eseries_get_tmio_gpios(void);
extern struct resource eseries_tmio_resources[];
extern struct platform_device e300_tc6387xb_device;
-extern void eseries_register_clks(void);
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
index 576868f..41b4c93 100644
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -25,7 +25,7 @@
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 9a9c539..6d38c65 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -394,9 +394,9 @@
}
if (flags & SOCAM_DATAWIDTH_8)
- gpio_set_value(gpio_bus_switch, 1);
+ gpio_set_value_cansleep(gpio_bus_switch, 1);
else
- gpio_set_value(gpio_bus_switch, 0);
+ gpio_set_value_cansleep(gpio_bus_switch, 0);
return 0;
}
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3700cf3..5261a7e 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -6,7 +6,6 @@
bool
depends on ARCH_S3C2410
select CPU_ARM920T
- select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index b2b2a5b..ae8e482 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-#include <plat/dma.h>
#include <linux/sysdev.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
@@ -51,6 +50,18 @@
DMACH_MAX, /* the end entry */
};
+static inline bool samsung_dma_has_circular(void)
+{
+ return false;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+ return false;
+}
+
+#include <plat/dma.h>
+
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
@@ -163,7 +174,7 @@
struct s3c2410_dma_client *client;
/* channel configuration */
- enum s3c2410_dmasrc source;
+ enum dma_data_direction source;
enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
@@ -196,9 +207,4 @@
typedef unsigned long dma_device_t;
-static inline bool s3c_dma_has_circular(void)
-{
- return false;
-}
-
#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
index eee0654..a957bc8e 100644
--- a/arch/arm/mach-s3c2410/include/mach/fb.h
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -1,74 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <mach/regs-lcd.h>
-
-struct s3c2410fb_hw {
- unsigned long lcdcon1;
- unsigned long lcdcon2;
- unsigned long lcdcon3;
- unsigned long lcdcon4;
- unsigned long lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
- /* LCD type */
- unsigned type;
-
- /* Screen size */
- unsigned short width;
- unsigned short height;
-
- /* Screen info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned pixclock; /* pixclock in picoseconds */
- unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
-
- /* lcd configuration registers */
- unsigned long lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
- struct s3c2410fb_display *displays; /* attached diplays info */
- unsigned num_displays; /* number of defined displays */
- unsigned default_display;
-
- /* GPIOs */
-
- unsigned long gpcup;
- unsigned long gpcup_mask;
- unsigned long gpccon;
- unsigned long gpccon_mask;
- unsigned long gpdup;
- unsigned long gpdup_mask;
- unsigned long gpdcon;
- unsigned long gpdcon_mask;
-
- /* lpc3600 control register */
- unsigned long lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
+#include <plat/fb-s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index bab1392..c53ad34 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
- /* 1:1 mapping between cfgpin and setcfg calls at the moment */
- s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 4f7bf32..019ea86 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -53,7 +53,7 @@
#define S3C2410_GPIO_M_NR (32) /* technically 2. */
#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
#endif
#define S3C2410_GPIO_NEXT(__gpio) \
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
index d67819d..c410a07 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -17,11 +17,11 @@
#include <mach/regs-gpio.h>
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
{
- struct s3c_gpio_chip *chip;
+ struct samsung_gpio_chip *chip;
if (pin > S3C_GPIO_END)
return NULL;
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index e5a68ea..e53b217 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -191,9 +191,9 @@
#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2
#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
#endif
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 4cf495f..78ae807 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -149,6 +149,7 @@
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
+#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1)
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index 45eea52..2eef7e6 100644
--- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -64,4 +64,4 @@
}
static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 5e06c72..c3feff3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -65,6 +65,7 @@
#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
+#define S3C2416_CLKDIV0_ARMDIV_MASK (7 << 9)
#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
@@ -102,6 +103,7 @@
#define S3C2443_PCLKCON_UART3 (1<<3)
#define S3C2443_PCLKCON_IIC (1<<4)
#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_HSSPI (1<<6)
#define S3C2443_PCLKCON_ADC (1<<7)
#define S3C2443_PCLKCON_AC97 (1<<8)
#define S3C2443_PCLKCON_IIS (1<<9)
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 556c535..caa4ae2 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -696,9 +696,9 @@
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
- tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
- | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
- | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
+ tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+ | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+ | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 367d376..4518521 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -49,6 +49,7 @@
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
+#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <plat/nand.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 343a540..3d7ebc5 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -72,8 +72,8 @@
void __init s3c2410_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
}
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index c61e326..d2a7d5ef 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -130,11 +130,11 @@
static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
- enum s3c2410_dmasrc dir)
+ enum dma_data_direction dir)
{
unsigned long chsel;
- if (dir == S3C2410_DMASRC_HW)
+ if (dir == DMA_FROM_DEVICE)
chsel = map->channels_rx[0];
else
chsel = map->channels[0];
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 0000000..4526f6b
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPB(0))
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPF(0) &&
+ pin <= S3C2410_GPG(16))
+ return -EINVAL;
+
+ if (pin > S3C2410_GPH(16))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(chip->base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, chip->base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 69b48a7..84c7b03 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -13,7 +13,6 @@
select CPU_ARM926T
select S3C2416_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
- select S3C_GPIO_PULL_UPDOWN
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
help
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 21a5e81..afbbe8b 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -21,7 +21,6 @@
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
-#include <plat/pll6553x.h>
#include <plat/pll.h>
#include <asm/mach/map.h>
@@ -29,6 +28,14 @@
#include <mach/regs-clock.h>
#include <mach/regs-s3c2443-clock.h>
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
+*/
+
static unsigned int armdiv[8] = {
[0] = 1,
[1] = 2,
@@ -38,6 +45,32 @@
[7] = 8,
};
+static struct clksrc_clk hsspi_eplldiv = {
+ .clk = {
+ .name = "hsspi-eplldiv",
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = (1 << 14),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+ [0] = &hsspi_eplldiv.clk,
+ [1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+ .clk = {
+ .name = "hsspi-if",
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = hsspi_sources,
+ .nr_sources = ARRAY_SIZE(hsspi_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
static struct clksrc_clk hsmmc_div[] = {
[0] = {
.clk = {
@@ -100,20 +133,15 @@
.ctrlbit = S3C2416_HCLKCON_HSMMC0,
};
-static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
-{
- clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
- return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
void __init_or_cpufreq s3c2416_setup_clocks(void)
{
- s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+ s3c2443_common_setup_clocks(s3c2416_get_pll);
}
static struct clksrc_clk *clksrcs[] __initdata = {
+ &hsspi_eplldiv,
+ &hsspi_mux,
&hsmmc_div[0],
&hsmmc_div[1],
&hsmmc_mux[0],
@@ -131,7 +159,9 @@
clk_epll.parent = &clk_epllref.clk;
- s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+ s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
+ armdiv, ARRAY_SIZE(armdiv),
+ S3C2416_CLKDIV0_ARMDIV_MASK);
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 20b3fdf..ee214bc 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -60,6 +60,7 @@
#include <plat/iic-core.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
+#include <plat/adc-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -97,6 +98,8 @@
s3c_fb_setname("s3c2443-fb");
+ s3c_adc_setname("s3c2416-adc");
+
#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
#endif
@@ -120,8 +123,8 @@
void __init s3c2416_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+ s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
/* initialize device information early */
s3c2416_default_sdhci0();
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
index ed34fad..cee5395 100644
--- a/arch/arm/mach-s3c2416/setup-sdhci.c
+++ b/arch/arm/mach-s3c2416/setup-sdhci.c
@@ -12,17 +12,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -32,30 +22,3 @@
[2] = "hsmmc-if",
/* [3] = "48m", - note not successfully used yet */
};
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index c461fb8..914e620 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,7 +5,6 @@
config CPU_S3C2440
bool
select CPU_ARM920T
- select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C2410_DMA
@@ -17,7 +16,6 @@
config CPU_S3C2442
bool
select CPU_ARM920T
- select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_PM if PM
select CPU_S3C244X
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 684dbb3..0d3453b 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -43,6 +43,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
+#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 2270d33..37f8cc6 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -70,6 +70,6 @@
{
s3c244x_map_io();
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 6f2b65e..2c822e0 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -182,6 +182,6 @@
{
s3c244x_map_io();
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index d8eb868..8814031 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -10,7 +10,6 @@
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
- select S3C_GPIO_PULL_S3C2443
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 38058af..1c2c088 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -57,18 +57,14 @@
/* clock selections */
-static struct clk clk_i2s_ext = {
- .name = "i2s-ext",
-};
-
/* armdiv
*
* this clock is sourced from msysclk and can have a number of
* divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
*/
-/* armdiv divisor table */
-
static unsigned int armdiv[16] = {
[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
@@ -80,92 +76,6 @@
[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
};
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
- clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
- return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned best = 256; /* bigger than any value */
- unsigned div;
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
- div = armdiv[ptr];
- calc = parent / div;
- if (calc <= rate && div < best)
- best = div;
- }
-
- return parent / best;
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned div;
- unsigned best = 256; /* bigger than any value */
- int ptr;
- int val = -1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
- div = armdiv[ptr];
- calc = parent / div;
- if (calc <= rate && div < best) {
- best = div;
- val = ptr;
- }
- }
-
- if (val >= 0) {
- unsigned long clkcon0;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
- clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
- __raw_writel(clkcon0, S3C2443_CLKDIV0);
- }
-
- return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
- .name = "armdiv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .round_rate = s3c2443_armclk_roundrate,
- .set_rate = s3c2443_armclk_setrate,
- },
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
- [0] = &clk_armdiv,
- [1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
- .clk = {
- .name = "armclk",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_arm_sources,
- .nr_sources = ARRAY_SIZE(clk_arm_sources),
- },
- .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
/* hsspi
*
* high-speed spi clock, sourced from esysclk
@@ -173,7 +83,7 @@
static struct clksrc_clk clk_hsspi = {
.clk = {
- .name = "hsspi",
+ .name = "hsspi-if",
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
@@ -235,48 +145,6 @@
},
};
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
- .clk = {
- .name = "i2s-eplldiv",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
- [0] = &clk_i2s_eplldiv.clk,
- [1] = &clk_i2s_ext,
- [2] = &clk_epllref.clk,
- [3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
- .clk = {
- .name = "i2s-if",
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
-
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_i2s_srclist,
- .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
/* standard clock definitions */
static struct clk init_clocks_off[] = {
@@ -286,11 +154,6 @@
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
}, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIS,
- }, {
.name = "spi",
.devname = "s3c2410-spi.0",
.parent = &clk_p,
@@ -305,27 +168,20 @@
}
};
-static struct clk init_clocks[] = {
-};
-
/* clocks to add straight away */
static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_arm,
- &clk_i2s_eplldiv,
- &clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
};
static struct clk *clks[] __initdata = {
&clk_hsmmc,
- &clk_armdiv,
};
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
- s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
+ s3c2443_common_setup_clocks(s3c2443_get_mpll);
}
void __init s3c2443_init_clocks(int xtal)
@@ -336,7 +192,9 @@
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
clk_epll.parent = &clk_epllref.clk;
- s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
+ s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
+ armdiv, ARRAY_SIZE(armdiv),
+ S3C2443_CLKDIV0_ARMDIV_MASK);
s3c2443_setup_clocks();
@@ -345,10 +203,6 @@
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
- /* register clocks from clock array */
-
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index e6a28ba..a22b771 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -41,6 +41,7 @@
#include <plat/cpu.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
+#include <plat/adc-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -70,6 +71,8 @@
s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");
+ s3c_adc_setname("s3c2443-adc");
+
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
@@ -90,8 +93,8 @@
void __init s3c2443_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+ s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+ s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f057b6a..5552e04 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -288,5 +288,6 @@
select S3C_DEV_RTC
select S3C64XX_DEV_SPI
select S3C24XX_GPIO_EXTRA128
+ select I2C
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 61b4034..cfc0b99 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -13,7 +13,6 @@
# Core files
obj-y += cpu.o
obj-y += clock.o
-obj-y += gpiolib.o
# Core support for S3C6400 system
@@ -55,12 +54,10 @@
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
# device support
obj-y += dev-uart.o
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
-obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o
-obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8cf39e3..39c238d 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -25,13 +25,13 @@
#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
-#include <mach/pll.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/pll.h>
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
@@ -735,7 +735,8 @@
/* For now assume the mux always selects the crystal */
clk_ext_xtal_mux.parent = xtal_clk;
- epll = s3c6400_get_epll(xtal);
+ epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
+ __raw_readl(S3C_EPLL_CON1));
mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
@@ -744,7 +745,13 @@
printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
apll, mpll, epll);
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+ /* Synchronous mode */
+ hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ else
+ /* Asynchronous mode */
+ hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index c704783..de085b7 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -34,8 +34,8 @@
#include <plat/devs.h>
#include <plat/clock.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
/* table of supported CPUs */
diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c
deleted file mode 100644
index 999f9e1..0000000
--- a/arch/arm/mach-s3c64xx/dev-onenand1.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/dev-onenand1.c
- *
- * Copyright (c) 2008-2010 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S3C64XX series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c64xx_onenand1_resources[] = {
- [0] = {
- .start = S3C64XX_PA_ONENAND1,
- .end = S3C64XX_PA_ONENAND1 + 0x400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S3C64XX_PA_ONENAND1_BUF,
- .end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_ONENAND1,
- .end = IRQ_ONENAND1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
- .name = "samsung-onenand",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
- .resource = s3c64xx_onenand1_resources,
-};
-
-void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
- &s3c64xx_device_onenand1);
-}
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 204bfaf..17d62f4 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -147,14 +147,14 @@
u32 control0, control1;
switch (chan->source) {
- case S3C2410_DMASRC_HW:
+ case DMA_FROM_DEVICE:
src = chan->dev_addr;
dst = data;
control0 = PL080_CONTROL_SRC_AHB2;
control0 |= PL080_CONTROL_DST_INCR;
break;
- case S3C2410_DMASRC_MEM:
+ case DMA_TO_DEVICE:
src = data;
dst = chan->dev_addr;
control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@
int s3c2410_dma_devconfig(enum dma_ch channel,
- enum s3c2410_dmasrc source,
+ enum dma_data_direction source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@
pr_debug("%s: peripheral %d\n", __func__, peripheral);
switch (source) {
- case S3C2410_DMASRC_HW:
+ case DMA_FROM_DEVICE:
config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
break;
- case S3C2410_DMASRC_MEM:
+ case DMA_TO_DEVICE:
config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
break;
@@ -740,7 +740,7 @@
}
/* Set all DMA configuration to be DMA, not SDMA */
- writel(0xffffff, S3C_SYSREG(0x110));
+ writel(0xffffff, S3C64XX_SDMA_SEL);
/* Register standard DMA controllers */
s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
deleted file mode 100644
index 92b0908..0000000
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 8 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 5 4Bit Yes 3
- * E 5 4Bit Yes None
- * F 16 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 16 4Bit[2] No None
- * L 15 4Bit[2] No None
- * M 6 4Bit No IRQ_EINT
- * N 16 2Bit No IRQ_EINT
- * O 16 2Bit Yes 7
- * P 15 2Bit Yes 8
- * Q 9 2Bit Yes 9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
- .cfg_eint = 7,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
- .cfg_eint = 3,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
- return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
- {
- .base = S3C64XX_GPA_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPA(0),
- .ngpio = S3C64XX_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S3C64XX_GPB_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPB(0),
- .ngpio = S3C64XX_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S3C64XX_GPC_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPC(0),
- .ngpio = S3C64XX_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S3C64XX_GPD_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPD(0),
- .ngpio = S3C64XX_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .base = S3C64XX_GPE_BASE,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPE(0),
- .ngpio = S3C64XX_GPIO_E_NR,
- .label = "GPE",
- },
- }, {
- .base = S3C64XX_GPG_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPG(0),
- .ngpio = S3C64XX_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S3C64XX_GPM_BASE,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPM(0),
- .ngpio = S3C64XX_GPIO_M_NR,
- .label = "GPM",
- .to_irq = s3c64xx_gpio2int_gpm,
- },
- },
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
- return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
- {
- .base = S3C64XX_GPH_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPH(0),
- .ngpio = S3C64XX_GPIO_H_NR,
- .label = "GPH",
- },
- }, {
- .base = S3C64XX_GPK_BASE + 0x4,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPK(0),
- .ngpio = S3C64XX_GPIO_K_NR,
- .label = "GPK",
- },
- }, {
- .base = S3C64XX_GPL_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPL(0),
- .ngpio = S3C64XX_GPIO_L_NR,
- .label = "GPL",
- .to_irq = s3c64xx_gpio2int_gpl,
- },
- },
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
- .cfg_eint = 2,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
- {
- .base = S3C64XX_GPF_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPF(0),
- .ngpio = S3C64XX_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S3C64XX_GPI_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPI(0),
- .ngpio = S3C64XX_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S3C64XX_GPJ_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPJ(0),
- .ngpio = S3C64XX_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S3C64XX_GPN_BASE,
- .irq_base = IRQ_EINT(0),
- .config = &gpio_2bit_cfg_eint10,
- .chip = {
- .base = S3C64XX_GPN(0),
- .ngpio = S3C64XX_GPIO_N_NR,
- .label = "GPN",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = S3C64XX_GPO_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPO(0),
- .ngpio = S3C64XX_GPIO_O_NR,
- .label = "GPO",
- },
- }, {
- .base = S3C64XX_GPP_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPP(0),
- .ngpio = S3C64XX_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .base = S3C64XX_GPQ_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPQ(0),
- .ngpio = S3C64XX_GPIO_Q_NR,
- .label = "GPQ",
- },
- },
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
- chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
- int nr_chips,
- void (*fn)(struct s3c_gpio_chip *))
-{
- for (; nr_chips > 0; nr_chips--, chips++) {
- if (fn)
- (fn)(chips);
- s3c_gpiolib_add(chips);
- }
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
- s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
- samsung_gpiolib_add_4bit);
-
- s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
- samsung_gpiolib_add_4bit2);
-
- s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
- s3c64xx_gpiolib_add_2bit);
-
- return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
new file mode 100644
index 0000000..be9074e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 0a5d926..fe1a98c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -58,11 +58,15 @@
DMACH_MAX /* the end */
};
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
{
return true;
}
+static inline bool samsung_dma_is_dmadev(void)
+{
+ return false;
+}
#define S3C2410_DMAF_CIRCULAR (1 << 0)
#include <plat/dma.h>
@@ -95,7 +99,7 @@
unsigned char peripheral;
unsigned int flags;
- enum s3c2410_dmasrc source;
+ enum dma_data_direction source;
dma_addr_t dev_addr;
diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
deleted file mode 100644
index 5ef0bb6..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/pll.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT (16)
-#define S3C6400_PLL_PDIV_SHIFT (8)
-#define S3C6400_PLL_SDIV_SHIFT (0)
-
-#include <asm/div64.h>
-#include <plat/pll6553x.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
- u32 pllcon)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
- pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
- sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
- return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
- __raw_readl(S3C_EPLL_CON1));
-}
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index 38659be..fcf3dca 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -104,7 +104,7 @@
__raw_writel(0, S3C64XX_SLPEN);
}
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
{
/* turn on the sleep mode and keep it there, as it seems that during
* suspend the xCON registers get re-set and thus you can end up with
diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
deleted file mode 100644
index b25bede..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9..b91e020 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -21,8 +21,11 @@
#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
#define S3C64XX_OTHERS S3C_SYSREG(0x900)
#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index d164a28..8eba88e 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -45,7 +45,7 @@
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
new file mode 100644
index 0000000..6666856
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -0,0 +1,182 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+ {
+ .name = "Sub LPF",
+ .rate = 48000,
+ .regs = {
+ 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+ {
+ .name = "Sub HPF",
+ .rate = 48000,
+ .regs = {
+ 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .micdet_def = 1,
+ .inl_mode = WM8996_DIFFERRENTIAL_1,
+ .inr_mode = WM8996_DIFFERRENTIAL_1,
+
+ .irq_flags = IRQF_TRIGGER_RISING,
+
+ .gpio_default = {
+ 0x8001, /* GPIO1 == ADCLRCLK1 */
+ 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+ 0x0141, /* GPIO3 == HP_SEL */
+ 0x0002, /* GPIO4 == IRQ */
+ 0x020e, /* GPIO5 == CLKOUT */
+ },
+
+ .retune_mobile_cfgs = wm8996_retune,
+ .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+ .gpio_init = {
+ 0,
+ WM8962_GPIO_FN_OPCLK,
+ WM8962_GPIO_FN_DMICCLK,
+ 0,
+ 0x8000 | WM8962_GPIO_FN_DMICDAT,
+ WM8962_GPIO_FN_IRQ, /* Open drain mode */
+ },
+ .irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+ .irq_high = false,
+ .irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+ { I2C_BOARD_INFO("wm8996", 0x1a),
+ .platform_data = &wm8996_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+ { I2C_BOARD_INFO("wm5100", 0x1a),
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+ { I2C_BOARD_INFO("wm8962", 0x1a),
+ .platform_data = &wm8962_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
+
+
+static __devinitdata const struct {
+ u8 id;
+ const char *name;
+ const struct i2c_board_info *i2c_devs;
+ int num_i2c_devs;
+} gf_mods[] = {
+ { .id = 0x01, .name = "1250-EV1 Springbank" },
+ { .id = 0x02, .name = "1251-EV1 Jura" },
+ { .id = 0x03, .name = "1252-EV1 Glenlivet" },
+ { .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+ { .id = 0x21, .name = "1275-EV1 Mortlach" },
+ { .id = 0x25, .name = "1274-EV1 Glencadam" },
+ { .id = 0x31, .name = "1253-EV1 Tomatin", },
+ { .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+ .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+ { .id = 0x3a, .name = "1259-EV1 Tobermory",
+ .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+ { .id = 0x3b, .name = "1255-EV1 Kilchoman",
+ .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+ { .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *i2c_id)
+{
+ int ret, i, j, id, rev;
+
+ ret = i2c_smbus_read_byte_data(i2c, 0);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+ return ret;
+ }
+
+ id = (ret & 0xfe) >> 2;
+ rev = ret & 0x3;
+ for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+ if (id == gf_mods[i].id)
+ break;
+
+ if (i < ARRAY_SIZE(gf_mods)) {
+ dev_info(&i2c->dev, "%s revision %d\n",
+ gf_mods[i].name, rev + 1);
+ for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+ if (!i2c_new_device(i2c->adapter,
+ &(gf_mods[i].i2c_devs[j])))
+ dev_err(&i2c->dev,
+ "Failed to register dev: %d\n", ret);
+ }
+ } else {
+ dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+ id, rev);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+ { "wlf-gf-module", 0 },
+ { }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+ .driver = {
+ .name = "wlf-gf-module",
+ .owner = THIS_MODULE,
+ },
+ .probe = wlf_gf_module_probe,
+ .id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+ return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8065803..d04b654 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -43,13 +43,14 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/s3c6410.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include <mach/crag6410.h>
#include <mach/regs-gpio-memport.h>
+#include <plat/s3c6410.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
@@ -65,17 +66,6 @@
#include <plat/iic.h>
#include <plat/pm.h>
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
-
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@
.id = -1,
};
+static struct platform_device lowland_device = {
+ .name = "lowland",
+ .id = -1,
+};
+
static struct platform_device speyside_wm8962_device = {
.name = "speyside-wm8962",
.id = -1,
@@ -295,6 +290,8 @@
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
};
static struct regulator_init_data wallvdd_data = {
@@ -342,6 +339,7 @@
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
+ &lowland_device,
&wallvdd_device,
};
@@ -350,6 +348,12 @@
.irq_base = 0,
};
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+ .dvs_control_src = 1,
+ .dvs_gpio = S3C64XX_GPK(0),
+};
+
static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
@@ -365,6 +369,7 @@
.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
.consumer_supplies = vddarm_consumers,
.supply_regulator = "WALLVDD",
+ .driver_data = &vddarm_pdata,
};
static struct regulator_init_data vddint __initdata = {
@@ -500,6 +505,8 @@
.backup = &banff_backup_pdata,
.gpio_defaults = {
+ /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+ [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -557,8 +564,12 @@
};
static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+ REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD3", "1-001a"),
REGULATOR_SUPPLY("CPVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD2", "1-001a"),
REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -611,81 +622,16 @@
.disable_touch = true,
};
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
- {
- .name = "Sub LPF",
- .rate = 48000,
- .regs = {
- 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
- {
- .name = "Sub HPF",
- .rate = 48000,
- .regs = {
- 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .gpio_base = CODEC_GPIO_BASE,
- .micdet_def = 1,
- .inl_mode = WM8996_DIFFERRENTIAL_1,
- .inr_mode = WM8996_DIFFERRENTIAL_1,
-
- .irq_flags = IRQF_TRIGGER_RISING,
-
- .gpio_default = {
- 0x8001, /* GPIO1 == ADCLRCLK1 */
- 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
- 0x0141, /* GPIO3 == HP_SEL */
- 0x0002, /* GPIO4 == IRQ */
- 0x020e, /* GPIO5 == CLKOUT */
- },
-
- .retune_mobile_cfgs = wm8996_retune,
- .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
- .gpio_init = {
- 0,
- WM8962_GPIO_FN_OPCLK,
- WM8962_GPIO_FN_DMICCLK,
- 0,
- 0x8000 | WM8962_GPIO_FN_DMICDAT,
- WM8962_GPIO_FN_IRQ, /* Open drain mode */
- },
- .irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
- .irq_high = false,
- .irq_cmos = false,
-};
-
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
- { I2C_BOARD_INFO("wm8996", 0x1a),
- .platform_data = &wm8996_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
- { I2C_BOARD_INFO("wm8962", 0x1a),
- .platform_data = &wm8962_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
};
static void __init crag6410_map_io(void)
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 19a0887..952f75f 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -37,7 +37,7 @@
#include <plat/fb.h>
#include <plat/nand.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fb8969a..1bc85c3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -32,8 +32,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index c30f2e5..cb13cba 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -39,7 +39,7 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 93170d4..87281e4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,8 +33,8 @@
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index cbb57de..94c831d 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -22,8 +22,8 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 04f914b..f112547 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -22,8 +22,8 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6fd5e95..73450c2 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -31,7 +31,7 @@
#include <plat/regs-serial.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 5f147c3..8bc8edd 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -63,7 +63,7 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 055e285..b375cd5 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -29,6 +29,7 @@
#include <mach/regs-clock.h>
#include <mach/regs-syscon-power.h>
#include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
@@ -85,6 +86,9 @@
SAVE_ITEM(S3C64XX_MEM0CONSLP0),
SAVE_ITEM(S3C64XX_MEM0CONSLP1),
SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+ SAVE_ITEM(S3C64XX_SDMA_SEL),
+ SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
};
void s3c_pm_configure_extint(void)
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 5e93fe3..7a3bc32 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -38,7 +38,7 @@
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
void __init s3c6400_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 312aa6b..4117003 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,8 +41,8 @@
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
void __init s3c6410_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index f344a22..c75a71b 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -12,17 +12,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -32,41 +22,3 @@
[2] = "mmc_bus",
/* [3] = "48m", - note not successfully used yet */
};
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
-}
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518..18690c5 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,18 +9,28 @@
config CPU_S5P6440
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_HRT
+ select S5P_SLEEP if PM
+ select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_HRT
+ select S5P_SLEEP if PM
+ select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
+config S5P64X0_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5P64X0 based boards with a LCD display
+ through RGB interface.
+
config S5P64X0_SETUP_I2C1
bool
help
@@ -31,6 +41,7 @@
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
+ select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
@@ -39,6 +50,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
@@ -46,6 +58,7 @@
config MACH_SMDK6450
bool "SMDK6450"
select CPU_S5P6450
+ select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
@@ -54,6 +67,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6450
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf..a1324d8 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -12,10 +12,11 @@
# Core support for S5P64X0 system
-obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
+obj-$(CONFIG_PM) += pm.o irq-pm.o
# machine support
@@ -28,3 +29,4 @@
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd30..c54c65d 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -146,7 +146,8 @@
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 8),
}, {
- .name = "pdma",
+ .name = "dma",
+ .devname = "dma-pl330",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
@@ -499,6 +500,11 @@
&clk_pclk_low,
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
void __init_or_cpufreq s5p6440_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -581,5 +587,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16c..2d04abf 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -179,7 +179,8 @@
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "pdma",
+ .name = "dma",
+ .devname = "dma-pl330",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
@@ -553,6 +554,11 @@
&clk_sclk_audio0,
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
void __init_or_cpufreq s5p6450_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -632,5 +638,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index 8a93854..ecab40c 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -39,6 +39,7 @@
#include <plat/s5p6440.h>
#include <plat/s5p6450.h>
#include <plat/adc-core.h>
+#include <plat/fb-core.h>
/* Initial IO mappings */
@@ -109,6 +110,7 @@
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
@@ -119,6 +121,7 @@
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 0e5b3e6..442dd4a 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -21,115 +21,208 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/s3c-pl330-pdata.h>
+#include <plat/irqs.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5p64x0_pdma_resource[] = {
- [0] = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DMA0,
- .end = IRQ_DMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
},
};
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_MAX,
- [10] = DMACH_PCM0_TX,
- [11] = DMACH_PCM0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S0_RX,
- [14] = DMACH_SPI0_TX,
- [15] = DMACH_SPI0_RX,
- [16] = DMACH_MAX,
- [17] = DMACH_MAX,
- [18] = DMACH_MAX,
- [19] = DMACH_MAX,
- [20] = DMACH_SPI1_TX,
- [21] = DMACH_SPI1_RX,
- [22] = DMACH_MAX,
- [23] = DMACH_MAX,
- [24] = DMACH_MAX,
- [25] = DMACH_MAX,
- [26] = DMACH_MAX,
- [27] = DMACH_MAX,
- [28] = DMACH_MAX,
- [29] = DMACH_PWM,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+ .peri = s5p6440_pdma_peri,
+};
+
+struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_USI_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_USI_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_UART5_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART5_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_UART4_RX,
- [9] = DMACH_UART4_TX,
- [10] = DMACH_PCM0_TX,
- [11] = DMACH_PCM0_RX,
- [12] = DMACH_I2S0_TX,
- [13] = DMACH_I2S0_RX,
- [14] = DMACH_SPI0_TX,
- [15] = DMACH_SPI0_RX,
- [16] = DMACH_PCM1_TX,
- [17] = DMACH_PCM1_RX,
- [18] = DMACH_PCM2_TX,
- [19] = DMACH_PCM2_RX,
- [20] = DMACH_SPI1_TX,
- [21] = DMACH_SPI1_RX,
- [22] = DMACH_USI_TX,
- [23] = DMACH_USI_RX,
- [24] = DMACH_MAX,
- [25] = DMACH_I2S1_TX,
- [26] = DMACH_I2S1_RX,
- [27] = DMACH_I2S2_TX,
- [28] = DMACH_I2S2_RX,
- [29] = DMACH_PWM,
- [30] = DMACH_UART5_RX,
- [31] = DMACH_UART5_TX,
- },
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+ .peri = s5p6450_pdma_peri,
};
-static struct platform_device s5p64x0_device_pdma = {
- .name = "s3c-pl330",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
- .resource = s5p64x0_pdma_resource,
- .dev = {
+struct amba_device s5p64x0_device_pdma = {
+ .dev = {
+ .init_name = "dma-pl330",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
+ .res = {
+ .start = S5P64X0_PA_PDMA,
+ .end = S5P64X0_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_DMA0, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5p64x0_dma_init(void)
@@ -139,7 +232,7 @@
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
- platform_device_register(&s5p64x0_device_pdma);
+ amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb..5a622af 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5837a36..53982db 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -87,6 +87,10 @@
#define IRQ_I2S0 IRQ_I2SV40
+#define IRQ_LCD_FIFO IRQ_DISPCON0
+#define IRQ_LCD_VSYNC IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM IRQ_DISPCON2
+
/* S5P6450 EINT feature will be added */
/*
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 95c9125..4d3ac8a 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -47,6 +47,8 @@
#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5P64X0_PA_FB 0xEE000000
+
#define S5P64X0_PA_I2S 0xF2000000
#define S5P6450_PA_I2S1 0xF2800000
#define S5P6450_PA_I2S2 0xF2900000
@@ -64,6 +66,7 @@
#define S3C_PA_IIC1 S5P6440_PA_IIC1
#define S3C_PA_RTC S5P64X0_PA_RTC
#define S3C_PA_WDT S5P64X0_PA_WDT
+#define S3C_PA_FB S5P64X0_PA_FB
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
#define S5P_PA_SROMC S5P64X0_PA_SROMC
@@ -85,5 +88,6 @@
#define S5P_PA_UART5 S5P6450_PA_UART(5)
#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
new file mode 100644
index 0000000..e52f754
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
+ *
+ * Based on PM core support for S3C64XX by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
+
+ /*
+ * As a note, since the S5P64X0 UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
+
+ __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void) { }
+static inline void s3c_pm_arch_show_resume_irqs(void) { }
+
+/*
+ * make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on
+ */
+#define s3c_irqwake_eintallow ((1 << 16) - 1)
+#define s3c_irqwake_intallow (~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ u32 ucon = __raw_readl(regs + S3C2410_UCON);
+ u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+ u32 new_ucon;
+ u32 delta;
+
+ /*
+ * S5P64X0 UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settings.
+ */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /*
+ * We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /*
+ * change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0
+ */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /*
+ * as a precaution, don't change from
+ * PCLK2 => PCLK or vice-versa
+ */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+ __raw_writel(0, S5P64X0_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /*
+ * turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+ __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
+}
diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
deleted file mode 100644
index 19fff8b..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S5P64X0 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return 0;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK 0
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
index a133f22..bd91112 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -41,17 +41,50 @@
#define S5P6450_DPLL_CON S5P_CLKREG(0x50)
#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54)
+#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100)
#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C)
#define S5P64X0_SYS_ID S5P_CLKREG(0x118)
#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C)
#define S5P64X0_PWR_CFG S5P_CLKREG(0x804)
+#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808)
+#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818)
+#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828)
+
#define S5P64X0_OTHERS S5P_CLKREG(0x900)
+#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908)
+
+#define S5P64X0_INFORM0 S5P_CLKREG(0xA00)
#define S5P64X0_CLKDIV0_HCLK_SHIFT (8)
#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+/* HCLK GATE Registers */
+#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2)
+#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2)
+
+/* PCLK GATE Registers */
+#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4)
+#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3)
+#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2)
+#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1)
+
+#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15)
+#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14)
+#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11)
+#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10)
+#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5)
+#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5)
+
+#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0)
+
+#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0)
+
+#define S5P6450_OTHERS_DISABLE_INT (1 << 31)
+#define S5P64X0_OTHERS_RET_UART (1 << 26)
+#define S5P64X0_OTHERS_RET_MMC1 (1 << 25)
+#define S5P64X0_OTHERS_RET_MMC0 (1 << 24)
#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16)
/* Compatibility defines */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce2547..cfdfa4f 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,14 +34,35 @@
#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
+#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0)
+#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0)
+
+#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0)
+#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4)
+#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0)
+#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4)
+
+#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200)
+#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220)
+#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240)
+
/* External interrupt control registers for group0 */
#define EINT0CON0_OFFSET (0x900)
+#define EINT0FLTCON0_OFFSET (0x910)
+#define EINT0FLTCON1_OFFSET (0x914)
#define EINT0MASK_OFFSET (0x920)
#define EINT0PEND_OFFSET (0x924)
#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
+#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
+#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930)
+#define S5P64X0_SLPEN_USE_xSLP (1 << 0)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index 494e1a8..275dc74 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -20,6 +20,7 @@
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
@@ -134,6 +135,7 @@
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->chip.irq_set_wake = s3c_irqext_wake;
ct->regs.ack = EINT0PEND_OFFSET;
ct->regs.mask = EINT0MASK_OFFSET;
irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
new file mode 100644
index 0000000..3e6f245
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5p64x0/irq-pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Interrupt handling Power Management
+ *
+ * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <plat/pm.h>
+
+#include <mach/regs-gpio.h>
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S5P64X0_EINT0CON0),
+ SAVE_ITEM(S5P64X0_EINT0FLTCON0),
+ SAVE_ITEM(S5P64X0_EINT0FLTCON1),
+ SAVE_ITEM(S5P64X0_EINT0MASK),
+};
+
+static struct irq_grp_save {
+ u32 con;
+ u32 fltcon;
+ u32 mask;
+} eint_grp_save[4];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s5p64x0_irq_pm_suspend(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
+ grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
+ grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
+ }
+
+ return 0;
+}
+
+static void s5p64x0_irq_pm_resume(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
+ __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
+ __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
+ }
+
+ S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s5p64x0_irq_syscore_ops = {
+ .suspend = s5p64x0_irq_pm_suspend,
+ .resume = s5p64x0_irq_pm_resume,
+};
+
+static int __init s5p64x0_syscore_init(void)
+{
+ register_syscore_ops(&s5p64x0_irq_syscore_ops);
+
+ return 0;
+}
+core_initcall(s5p64x0_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 88857f5..4a1250c 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -23,6 +23,9 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -47,6 +50,8 @@
#include <plat/ts.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -92,6 +97,59 @@
},
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+ .win[0] = &smdk6440_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6440_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6440_GPN(5), 1);
+ gpio_set_value(S5P6440_GPN(5), 0);
+ gpio_set_value(S5P6440_GPN(5), 1);
+ gpio_free(S5P6440_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+ .set_power = smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6440_lcd_power_data,
+};
+
static struct platform_device *smdk6440_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
@@ -101,6 +159,8 @@
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6440_device_iis,
+ &s3c_device_fb,
+ &smdk6440_lcd_lte480wv,
};
static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -147,6 +207,17 @@
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void s5p6440_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
static void __init smdk6440_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
@@ -160,6 +231,9 @@
samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
+ s5p6440_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index e1b277b..0ab129e 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -23,6 +23,9 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -47,6 +50,8 @@
#include <plat/ts.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -110,6 +115,59 @@
#endif
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+ .win[0] = &smdk6450_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6450_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6450_GPN(5), 1);
+ gpio_set_value(S5P6450_GPN(5), 0);
+ gpio_set_value(S5P6450_GPN(5), 1);
+ gpio_free(S5P6450_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+ .set_power = smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6450_lcd_power_data,
+};
+
static struct platform_device *smdk6450_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
@@ -119,6 +177,9 @@
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6450_device_iis0,
+ &s3c_device_fb,
+ &smdk6450_lcd_lte480wv,
+
/* s5p6450_device_spi0 will be added */
};
@@ -166,6 +227,17 @@
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void s5p6450_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
static void __init smdk6450_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
@@ -179,6 +251,9 @@
samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
+ s5p6450_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
}
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
new file mode 100644
index 0000000..6992724
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -0,0 +1,204 @@
+/* linux/arch/arm/mach-s5p64x0/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 Power Management Support
+ *
+ * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+static struct sleep_save s5p64x0_core_save[] = {
+ SAVE_ITEM(S5P64X0_APLL_CON),
+ SAVE_ITEM(S5P64X0_MPLL_CON),
+ SAVE_ITEM(S5P64X0_EPLL_CON),
+ SAVE_ITEM(S5P64X0_EPLL_CON_K),
+ SAVE_ITEM(S5P64X0_CLK_SRC0),
+ SAVE_ITEM(S5P64X0_CLK_SRC1),
+ SAVE_ITEM(S5P64X0_CLK_DIV0),
+ SAVE_ITEM(S5P64X0_CLK_DIV1),
+ SAVE_ITEM(S5P64X0_CLK_DIV2),
+ SAVE_ITEM(S5P64X0_CLK_DIV3),
+ SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
+ SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
+ SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
+};
+
+static struct sleep_save s5p64x0_misc_save[] = {
+ SAVE_ITEM(S5P64X0_AHB_CON0),
+ SAVE_ITEM(S5P64X0_SPCON0),
+ SAVE_ITEM(S5P64X0_SPCON1),
+ SAVE_ITEM(S5P64X0_MEM0CONSLP0),
+ SAVE_ITEM(S5P64X0_MEM0CONSLP1),
+ SAVE_ITEM(S5P64X0_MEM0DRVCON),
+ SAVE_ITEM(S5P64X0_MEM1DRVCON),
+
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+/* DPLL is present only in S5P6450 */
+static struct sleep_save s5p6450_core_save[] = {
+ SAVE_ITEM(S5P6450_DPLL_CON),
+ SAVE_ITEM(S5P6450_DPLL_CON_K),
+};
+
+void s3c_pm_configure_extint(void)
+{
+ __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+ __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
+
+ s3c_pm_do_restore_core(s5p64x0_core_save,
+ ARRAY_SIZE(s5p64x0_core_save));
+
+ if (soc_is_s5p6450())
+ s3c_pm_do_restore_core(s5p6450_core_save,
+ ARRAY_SIZE(s5p6450_core_save));
+
+ s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+
+ if (soc_is_s5p6450())
+ s3c_pm_do_save(s5p6450_core_save,
+ ARRAY_SIZE(s5p6450_core_save));
+
+ s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
+}
+
+static int s5p64x0_cpu_suspend(unsigned long arg)
+{
+ unsigned long tmp = 0;
+
+ /*
+ * Issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case.
+ */
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
+
+ /* we should never get past here */
+ panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
+ { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
+ { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
+ { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
+ { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
+};
+
+static void s5p64x0_pm_prepare(void)
+{
+ u32 tmp;
+
+ samsung_sync_wakemask(S5P64X0_PWR_CFG,
+ s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
+
+ /* store the resume address in INFORM0 register */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
+
+ /* setup clock gating for FIMGVG block */
+ __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
+ (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
+ __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
+ (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
+
+ /* Configure the stabilization counter with wait time required */
+ __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
+
+ /* set WFI to SLEEP mode configuration */
+ tmp = __raw_readl(S5P64X0_SLEEP_CFG);
+ tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
+ __raw_writel(tmp, S5P64X0_SLEEP_CFG);
+
+ tmp = __raw_readl(S5P64X0_PWR_CFG);
+ tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
+ tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S5P64X0_PWR_CFG);
+
+ /*
+ * set OTHERS register to disable interrupt before going to
+ * sleep. This bit is present only in S5P6450, it is reserved
+ * in S5P6440.
+ */
+ if (soc_is_s5p6450()) {
+ tmp = __raw_readl(S5P64X0_OTHERS);
+ tmp |= S5P6450_OTHERS_DISABLE_INT;
+ __raw_writel(tmp, S5P64X0_OTHERS);
+ }
+
+ /* ensure previous wakeup state is cleared before sleeping */
+ __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
+
+}
+
+static int s5p64x0_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s5p64x0_pm_prepare;
+ pm_cpu_sleep = s5p64x0_cpu_suspend;
+ pm_uart_udivslot = 1;
+
+ return 0;
+}
+
+static struct sysdev_driver s5p64x0_pm_driver = {
+ .add = s5p64x0_pm_add,
+};
+
+static __init int s5p64x0_pm_drvinit(void)
+{
+ s3c_pm_init();
+
+ return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver);
+}
+arch_initcall(s5p64x0_pm_drvinit);
+
+static void s5p64x0_pm_resume(void)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(S5P64X0_OTHERS);
+ tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
+ S5P64X0_OTHERS_RET_UART);
+ __raw_writel(tmp , S5P64X0_OTHERS);
+}
+
+static struct syscore_ops s5p64x0_pm_syscore_ops = {
+ .resume = s5p64x0_pm_resume,
+};
+
+static __init int s5p64x0_pm_syscore_init(void)
+{
+ register_syscore_ops(&s5p64x0_pm_syscore_ops);
+
+ return 0;
+}
+arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 0000000..f346ee4
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+ if (soc_is_s5p6440()) {
+ s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+ } else if (soc_is_s5p6450()) {
+ s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+ }
+}
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e8a33c4..e538a4c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -10,7 +10,7 @@
config CPU_S5PC100
bool
select S5P_EXT_INT
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index ff5cbb3..8d47709 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -33,6 +33,11 @@
.name = "otg_phy",
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
static struct clk *clk_src_mout_href_list[] = {
[0] = &s5p_clk_27m,
[1] = &clk_fin_hpll,
@@ -454,14 +459,14 @@
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 2),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.1",
+ .name = "dma",
+ .devname = "dma-pl330.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.0",
+ .name = "dma",
+ .devname = "dma-pl330.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 0),
@@ -1276,5 +1281,7 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index bf4cd0f..065a087 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@@ -17,150 +21,246 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <asm/irq.h>
#include <plat/devs.h>
+#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5pc100_pdma0_resource[] = {
- [0] = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_IRDA,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_EXTERNAL,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_SPDIF,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_HSI_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_HSI_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_IRDA,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_SPI2_RX,
- [21] = DMACH_SPI2_TX,
- [22] = DMACH_AC97_MICIN,
- [23] = DMACH_AC97_PCMIN,
- [24] = DMACH_AC97_PCMOUT,
- [25] = DMACH_EXTERNAL,
- [26] = DMACH_PWM,
- [27] = DMACH_SPDIF,
- [28] = DMACH_HSI_RX,
- [29] = DMACH_HSI_TX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
};
-static struct platform_device s5pc100_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
- .resource = s5pc100_pdma0_resource,
- .dev = {
+struct amba_device s5pc100_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma0_pdata,
},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
- [0] = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
+ .res = {
+ .start = S5PC100_PA_PDMA0,
+ .end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[30] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_IRDA,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
},
};
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_IRDA,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_SPI2_RX,
- [21] = DMACH_SPI2_TX,
- [22] = DMACH_PCM0_RX,
- [23] = DMACH_PCM0_TX,
- [24] = DMACH_PCM1_RX,
- [25] = DMACH_PCM1_TX,
- [26] = DMACH_MSM_REQ0,
- [27] = DMACH_MSM_REQ1,
- [28] = DMACH_MSM_REQ2,
- [29] = DMACH_MSM_REQ3,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
};
-static struct platform_device s5pc100_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
- .resource = s5pc100_pdma1_resource,
- .dev = {
+struct amba_device s5pc100_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma1_pdata,
},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
- &s5pc100_device_pdma0,
- &s5pc100_device_pdma1,
+ .res = {
+ .start = S5PC100_PA_PDMA1,
+ .end = S5PC100_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5pc100_dma_init(void)
{
- platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+ amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s5pc100/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
deleted file mode 100644
index b34d2f7..0000000
--- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - pwm clock and timer support
- *
- * Based on mach-s3c6400/include/mach/pwm-clock.h
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index be25879..6418c6e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -11,17 +11,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -31,35 +21,3 @@
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = "48m", - note not successfully used yet */
};
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index aaeb44a..646057a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,9 +11,11 @@
config CPU_S5PV210
bool
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
+ select S5P_PM if PM
+ select S5P_SLEEP if PM
help
Enable S5PV210 CPU support
@@ -93,11 +95,13 @@
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
+ select S5P_DEV_TV
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_FIMC
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ef7e466..009fbe5 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o
# machine support
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f5f8fa8..4c5ac7a 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -174,6 +174,16 @@
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
@@ -203,6 +213,11 @@
.name = "pcmcdclk",
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
@@ -289,14 +304,14 @@
static struct clk init_clocks_off[] = {
{
- .name = "pdma",
- .devname = "s3c-pl330.0",
+ .name = "dma",
+ .devname = "dma-pl330.0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "pdma",
- .devname = "s3c-pl330.1",
+ .name = "dma",
+ .devname = "dma-pl330.1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 4),
@@ -330,6 +345,40 @@
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 16),
}, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "hdmi",
+ .devname = "s5pv210-hdmi",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "hdmiphy",
+ .devname = "s5pv210-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
.name = "otg",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip1_ctrl,
@@ -407,6 +456,12 @@
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<9),
}, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &clk_pclk_psys.clk,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.parent = &clk_pclk_psys.clk,
@@ -594,6 +649,23 @@
.nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
};
+static struct clksrc_clk clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
+ &clk_sclk_mixer,
+};
+
static struct clk *clkset_sclk_audio0_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_pcmcdclk0,
@@ -777,14 +849,6 @@
.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_mixer",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 1),
- },
- .sources = &clkset_sclk_mixer,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
- }, {
- .clk = {
.name = "sclk_fimc",
.devname = "s5pv210-fimc.0",
.enable = s5pv210_clk_mask1_ctrl,
@@ -973,9 +1037,6 @@
&clk_pclk_psys,
&clk_vpllsrc,
&clk_sclk_vpll,
- &clk_sclk_dac,
- &clk_sclk_pixel,
- &clk_sclk_hdmi,
&clk_mout_dmc0,
&clk_sclk_dmc0,
&clk_sclk_audio0,
@@ -1060,6 +1121,61 @@
.get_rate = s5p_epll_get_rate,
};
+static u32 vpll_div[][5] = {
+ { 54000000, 3, 53, 3, 0 },
+ { 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con = __raw_readl(S5P_VPLL_CON);
+ vpll_con &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+ if (vpll_div[i][0] == rate) {
+ vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+ vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+ vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+ vpll_con |= vpll_div[i][4] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con, S5P_VPLL_CON);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+ .get_rate = s5pv210_vpll_get_rate,
+ .set_rate = s5pv210_vpll_set_rate,
+};
+
void __init_or_cpufreq s5pv210_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -1108,6 +1224,7 @@
clk_fout_apll.ops = &clk_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &s5pv210_vpll_ops;
clk_fout_vpll.rate = vpll;
printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1153,11 +1270,15 @@
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+ s3c_register_clksrc(sclk_tv[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 9114572..84ec746 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -42,6 +42,7 @@
#include <plat/keypad-core.h>
#include <plat/sdhci.h>
#include <plat/reset.h>
+#include <plat/tv-core.h>
/* Initial IO mappings */
@@ -145,6 +146,9 @@
/* Use s5pv210-keypad instead of samsung-keypad */
samsung_keypad_setname("s5pv210-keypad");
+
+ /* setup TV devices */
+ s5p_hdmi_setname("s5pv210-hdmi");
}
void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 497d343..86b749c 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pv210/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@@ -17,151 +21,240 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5pv210_pdma0_resource[] = {
- [0] = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_SPDIF,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_MAX,
- [15] = DMACH_MAX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_MAX,
- [21] = DMACH_MAX,
- [22] = DMACH_AC97_MICIN,
- [23] = DMACH_AC97_PCMIN,
- [24] = DMACH_AC97_PCMOUT,
- [25] = DMACH_MAX,
- [26] = DMACH_PWM,
- [27] = DMACH_SPDIF,
- [28] = DMACH_MAX,
- [29] = DMACH_MAX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
};
-static struct platform_device s5pv210_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource),
- .resource = s5pv210_pdma0_resource,
- .dev = {
+struct amba_device s5pv210_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma0_pdata,
},
-};
-
-static struct resource s5pv210_pdma1_resource[] = {
- [0] = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
+ .res = {
+ .start = S5PV210_PA_PDMA0,
+ .end = S5PV210_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[32] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_MAX,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_MAX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_MAX,
- [21] = DMACH_MAX,
- [22] = DMACH_PCM0_RX,
- [23] = DMACH_PCM0_TX,
- [24] = DMACH_PCM1_RX,
- [25] = DMACH_PCM1_TX,
- [26] = DMACH_MSM_REQ0,
- [27] = DMACH_MSM_REQ1,
- [28] = DMACH_MSM_REQ2,
- [29] = DMACH_MSM_REQ3,
- [30] = DMACH_PCM2_RX,
- [31] = DMACH_PCM2_TX,
- },
+struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
};
-static struct platform_device s5pv210_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource),
- .resource = s5pv210_pdma1_resource,
- .dev = {
+struct amba_device s5pv210_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma1_pdata,
},
-};
-
-static struct platform_device *s5pv210_dmacs[] __initdata = {
- &s5pv210_device_pdma0,
- &s5pv210_device_pdma1,
+ .res = {
+ .start = S5PV210_PA_PDMA1,
+ .end = S5PV210_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5pv210_dma_init(void)
{
- platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+ amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s5pv210/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index b9f9ec3..5e0de3a 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -56,7 +56,7 @@
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC3 S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
@@ -86,7 +86,7 @@
#define IRQ_HDMI S5P_IRQ_VIC2(12)
#define IRQ_IIC1 S5P_IRQ_VIC2(13)
#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_SDO S5P_IRQ_VIC2(15)
#define IRQ_I2S0 S5P_IRQ_VIC2(16)
#define IRQ_I2S1 S5P_IRQ_VIC2(17)
#define IRQ_I2S2 S5P_IRQ_VIC2(18)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index aac343c..7ff609f 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,12 @@
#define S5PV210_PA_FIMC1 0xFB300000
#define S5PV210_PA_FIMC2 0xFB400000
+#define S5PV210_PA_SDO 0xF9000000
+#define S5PV210_PA_VP 0xF9100000
+#define S5PV210_PA_MIXER 0xF9200000
+#define S5PV210_PA_HDMI 0xFA100000
+#define S5PV210_PA_IIC_HDMIPHY 0xFA900000
+
/* Compatibiltiy Defines */
#define S3C_PA_FB S5PV210_PA_FB
@@ -110,6 +116,13 @@
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
#define S5P_PA_MFC S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO S5PV210_PA_SDO
+#define S5P_PA_VP S5PV210_PA_VP
+#define S5P_PA_MIXER S5PV210_PA_MIXER
+#define S5P_PA_HDMI S5PV210_PA_HDMI
+
#define S5P_PA_ONENAND S5PC110_PA_ONENAND
#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
index 3e22109..eba8aea 100644
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -43,4 +43,4 @@
}
static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
deleted file mode 100644
index f8a9f1b..0000000
--- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5PV210 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 78925c5..032de66 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -144,8 +144,9 @@
#define S5P_OTHERS S5P_CLKREG(0xE000)
#define S5P_OM_STAT S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804)
#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810)
#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
#define S5P_MIPI_DPHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_SRESETN (1 << 1)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 061cc7e..15edcae 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -48,6 +48,11 @@
#include <plat/s5p-time.h>
#include <plat/mfc.h>
#include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -272,6 +277,14 @@
i2c2_devs[0].irq = gpio_to_irq(gpio);
}
+static void goni_camera_init(void)
+{
+ s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+ /* Set max driver strength on CAM_A_CLKOUT pin. */
+ s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
@@ -285,6 +298,7 @@
static struct regulator_consumer_supply goni_ldo8_consumers[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_consumer_supply goni_ldo11_consumers[] = {
@@ -475,6 +489,10 @@
static struct regulator_consumer_supply buck2_consumer =
REGULATOR_SUPPLY("vddint", NULL);
+static struct regulator_consumer_supply buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
static struct regulator_init_data goni_buck1_data = {
.constraints = {
.name = "VARM_1.2V",
@@ -511,6 +529,8 @@
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &buck3_consumer,
};
static struct regulator_init_data goni_buck4_data = {
@@ -801,6 +821,34 @@
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+ .clk_rate = 16000000UL,
+ .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
+ .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+ I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+ .platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &noon010pc30_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 16000000UL,
+ },
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+ .isp_info = goni_camera_sensors,
+ .num_clients = ARRAY_SIZE(goni_camera_sensors),
+};
+
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
@@ -812,10 +860,13 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+ &s5p_device_mixer,
+ &s5p_device_sdo,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
@@ -884,6 +935,12 @@
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* FIMC */
+ s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ goni_camera_init();
+
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index a83b6c9..6b8ccc4 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -10,17 +10,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -30,34 +20,3 @@
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = NULL, - reserved */
};
-
-void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
deleted file mode 100644
index e3452cc..0000000
--- a/arch/arm/mach-s5pv210/sleep.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PV210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- * Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/memory.h>
-
- .text
-
- /* sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /* s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
- */
-
-ENTRY(s3c_cpu_resume)
- b cpu_resume
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0c8f6cf..0828fab 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -26,6 +26,7 @@
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
+ select I2C
comment "SH-Mobile Board Type"
@@ -69,6 +70,11 @@
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
+config MACH_KOTA2
+ bool "KOTA2 board"
+ select ARCH_REQUIRE_GPIOLIB
+ depends on ARCH_SH73A0
+
comment "SH-Mobile System Configuration"
menu "Memory configuration"
@@ -78,6 +84,7 @@
default "0x50000000" if MACH_G3EVM
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL
+ default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
@@ -89,6 +96,7 @@
default "0x08000000" if MACH_G3EVM
default "0x08000000" if MACH_G4EVM
default "0x20000000" if MACH_AG5EVM
+ default "0x1e000000" if MACH_KOTA2
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
default "0x04000000"
help
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 612b270..2aec2f7 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
+obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 475342b..83624e2 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -59,7 +59,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(33), /* PINT1 */
+ .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */
.flags = IORESOURCE_IRQ,
},
};
@@ -339,6 +339,18 @@
},
};
+/* SDHI0 */
+static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
+{
+ struct device *dev = arg;
+ struct sh_mobile_sdhi_info *info = dev->platform_data;
+ struct tmio_mmc_data *pdata = info->pdata;
+
+ tmio_mmc_cd_wakeup(pdata);
+
+ return IRQ_HANDLED;
+}
+
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
@@ -462,19 +474,6 @@
shmobile_setup_console();
}
-#define PINTC_ADDR 0xe6900000
-#define PINTER0A (PINTC_ADDR + 0xa0)
-#define PINTCR0A (PINTC_ADDR + 0xb0)
-
-void __init ag5evm_init_irq(void)
-{
- sh73a0_init_irq();
-
- /* setup PINT: enable PINTA2 as active low */
- __raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A);
- __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
-}
-
#define DSI0PHYCR 0xe615006c
static void __init ag5evm_init(void)
@@ -570,6 +569,13 @@
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "sdhi0 cd", &sdhi0_device.dev))
+ sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
+ else
+ pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
+
/* enable SDHI1 on CN4 [WLAN I/F] */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
@@ -601,7 +607,7 @@
MACHINE_START(AG5EVM, "ag5evm")
.map_io = ag5evm_map_io,
- .init_irq = ag5evm_init_irq,
+ .init_irq = sh73a0_init_irq,
.handle_irq = shmobile_handle_irq_gic,
.init_machine = ag5evm_init,
.timer = &ag5evm_timer,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 5b7edad..a3aa0f6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -200,8 +200,8 @@
static struct resource nor_flash_resources[] = {
[0] = {
- .start = 0x00000000,
- .end = 0x08000000 - 1,
+ .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
+ .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};
@@ -933,7 +933,7 @@
static struct sh_csi2_client_config csi2_clients[] = {
{
.phy = SH_CSI2_PHY_MAIN,
- .lanes = 3,
+ .lanes = 0, /* default: 2 lanes */
.channel = 0,
.pdev = &ap4evb_camera,
},
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
new file mode 100644
index 0000000..adc7312
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -0,0 +1,447 @@
+/*
+ * kota2 board support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Magnus Damm
+ * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+static struct resource smsc9220_resources[] = {
+ [0] = {
+ .start = 0x14000000, /* CS5A */
+ .end = 0x140000ff, /* A1->A7 */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(33), /* PINTA2 @ PORT144 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+ .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .dev = {
+ .platform_data = &smsc9220_platdata,
+ },
+ .resource = smsc9220_resources,
+ .num_resources = ARRAY_SIZE(smsc9220_resources),
+};
+
+static struct sh_keysc_info keysc_platdata = {
+ .mode = SH_KEYSC_MODE_6,
+ .scan_timing = 3,
+ .delay = 100,
+ .keycodes = {
+ KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
+ 0, 0, 0, 0, 0,
+ KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
+ 0, KEY_DOWN, 0, 0, 0,
+ KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
+ KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
+ KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
+ 0, KEY_UP, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ },
+};
+
+static struct resource keysc_resources[] = {
+ [0] = {
+ .name = "KEYSC",
+ .start = 0xe61b0000,
+ .end = 0xe61b0098 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(71),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device keysc_device = {
+ .name = "sh_keysc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(keysc_resources),
+ .resource = keysc_resources,
+ .dev = {
+ .platform_data = &keysc_platdata,
+ },
+};
+
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+ GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
+ GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
+ GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
+ GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
+ GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
+ GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
+ GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
+ GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
+ /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
+ GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
+ /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+ .poll_interval = 250, /* polled for now */
+};
+
+static struct platform_device gpio_keys_device = {
+ .name = "gpio-keys-polled", /* polled for now */
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+#define GPIO_LED(n, g) { .name = n, .gpio = g }
+
+static struct gpio_led gpio_leds[] = {
+ GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
+ GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
+ GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
+ GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
+ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
+ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
+ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_leds_info,
+ },
+};
+
+static struct resource mmcif_resources[] = {
+ [0] = {
+ .name = "MMCIF",
+ .start = 0xe6bd0000,
+ .end = 0xe6bd00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(140),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(141),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_mmcif_plat_data mmcif_info = {
+ .ocr = MMC_VDD_165_195,
+ .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .platform_data = &mmcif_info,
+ },
+ .num_resources = ARRAY_SIZE(mmcif_resources),
+ .resource = mmcif_resources,
+};
+
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0xee100000,
+ .end = 0xee1000ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(83),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(84),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = gic_spi(85),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+};
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xee120000,
+ .end = 0xee1200ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(87),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(88),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = gic_spi(89),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+};
+
+static struct platform_device *kota2_devices[] __initdata = {
+ ð_device,
+ &keysc_device,
+ &gpio_keys_device,
+ &gpio_leds_device,
+ &mmcif_device,
+ &sdhi0_device,
+ &sdhi1_device,
+};
+
+static struct map_desc kota2_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init kota2_map_io(void)
+{
+ iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
+
+ /* setup early devices and console here as well */
+ sh73a0_add_early_devices();
+ shmobile_setup_console();
+}
+
+#define PINTER0A 0xe69000a0
+#define PINTCR0A 0xe69000b0
+
+void __init kota2_init_irq(void)
+{
+ sh73a0_init_irq();
+
+ /* setup PINT: enable PINTA2 as active low */
+ __raw_writel(1 << 29, PINTER0A);
+ __raw_writew(2 << 10, PINTCR0A);
+}
+
+static void __init kota2_init(void)
+{
+ sh73a0_pinmux_init();
+
+ /* SCIFA2 (UART2) */
+ gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
+ gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
+
+ /* SCIFA4 (UART1) */
+ gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+ gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+ gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+ /* SMSC911X */
+ gpio_request(GPIO_FN_D0_NAF0, NULL);
+ gpio_request(GPIO_FN_D1_NAF1, NULL);
+ gpio_request(GPIO_FN_D2_NAF2, NULL);
+ gpio_request(GPIO_FN_D3_NAF3, NULL);
+ gpio_request(GPIO_FN_D4_NAF4, NULL);
+ gpio_request(GPIO_FN_D5_NAF5, NULL);
+ gpio_request(GPIO_FN_D6_NAF6, NULL);
+ gpio_request(GPIO_FN_D7_NAF7, NULL);
+ gpio_request(GPIO_FN_D8_NAF8, NULL);
+ gpio_request(GPIO_FN_D9_NAF9, NULL);
+ gpio_request(GPIO_FN_D10_NAF10, NULL);
+ gpio_request(GPIO_FN_D11_NAF11, NULL);
+ gpio_request(GPIO_FN_D12_NAF12, NULL);
+ gpio_request(GPIO_FN_D13_NAF13, NULL);
+ gpio_request(GPIO_FN_D14_NAF14, NULL);
+ gpio_request(GPIO_FN_D15_NAF15, NULL);
+ gpio_request(GPIO_FN_CS5A_, NULL);
+ gpio_request(GPIO_FN_WE0__FWE, NULL);
+ gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
+ gpio_direction_input(GPIO_PORT144);
+ gpio_request(GPIO_PORT145, NULL); /* RESET */
+ gpio_direction_output(GPIO_PORT145, 1);
+
+ /* KEYSC */
+ gpio_request(GPIO_FN_KEYIN0_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN1_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN2_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN3_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN4_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN5_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN6_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN7_PU, NULL);
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT4, NULL);
+ gpio_request(GPIO_FN_KEYOUT5, NULL);
+ gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
+ gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
+ gpio_request(GPIO_FN_KEYOUT8, NULL);
+
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+ gpio_request(GPIO_FN_MMCD0_0, NULL);
+ gpio_request(GPIO_FN_MMCD0_1, NULL);
+ gpio_request(GPIO_FN_MMCD0_2, NULL);
+ gpio_request(GPIO_FN_MMCD0_3, NULL);
+ gpio_request(GPIO_FN_MMCD0_4, NULL);
+ gpio_request(GPIO_FN_MMCD0_5, NULL);
+ gpio_request(GPIO_FN_MMCD0_6, NULL);
+ gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCCMD0, NULL);
+ gpio_request(GPIO_PORT208, NULL); /* Reset */
+ gpio_direction_output(GPIO_PORT208, 1);
+
+ /* SDHI0 (microSD) */
+ gpio_request(GPIO_FN_SDHICD0_PU, NULL);
+ gpio_request(GPIO_FN_SDHICMD0_PU, NULL);
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHID0_3_PU, NULL);
+ gpio_request(GPIO_FN_SDHID0_2_PU, NULL);
+ gpio_request(GPIO_FN_SDHID0_1_PU, NULL);
+ gpio_request(GPIO_FN_SDHID0_0_PU, NULL);
+
+ /* SCIFB (BT) */
+ gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL);
+ gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL);
+ gpio_request(GPIO_FN_PORT161_SCIFB_CTS_, NULL);
+ gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL);
+ gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL);
+
+ /* SDHI1 (BCM4330) */
+ gpio_request(GPIO_FN_SDHICLK1, NULL);
+ gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 64K*8way */
+ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+ sh73a0_add_standard_devices();
+ platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
+}
+
+static void __init kota2_timer_init(void)
+{
+ sh73a0_clock_init();
+ shmobile_timer.init();
+ return;
+}
+
+struct sys_timer kota2_timer = {
+ .init = kota2_timer_init,
+};
+
+MACHINE_START(KOTA2, "kota2")
+ .map_io = kota2_map_io,
+ .init_irq = kota2_init_irq,
+ .handle_irq = shmobile_handle_irq_gic,
+ .init_machine = kota2_init,
+ .timer = &kota2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3689ad2..9c5e598 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -273,8 +273,8 @@
static struct resource nor_flash_resources[] = {
[0] = {
- .start = 0x00000000,
- .end = 0x08000000 - 1,
+ .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
+ .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};
@@ -1223,9 +1223,10 @@
.width = 640,
.height = 480,
},
- .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
- SOCAM_DATA_ACTIVE_HIGH,
+ .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH,
+ .mbus_type = V4L2_MBUS_PARALLEL,
.set_capture = camera_set_capture,
};
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h
new file mode 100644
index 0000000..8b22258
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/intc.h
@@ -0,0 +1,246 @@
+#ifndef __ASM_MACH_INTC_H
+#define __ASM_MACH_INTC_H
+#include <linux/sh_intc.h>
+
+#define INTC_IRQ_PINS_ENUM_16L(p) \
+ p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \
+ p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
+
+#define INTC_IRQ_PINS_ENUM_16H(p) \
+ p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \
+ p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
+
+#define INTC_IRQ_PINS_VECT_16L(p, vect) \
+ vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \
+ vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \
+ vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \
+ vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \
+ vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \
+ vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \
+ vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \
+ vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
+
+#define INTC_IRQ_PINS_VECT_16H(p, vect) \
+ vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \
+ vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \
+ vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \
+ vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \
+ vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \
+ vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \
+ vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \
+ vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
+
+#define INTC_IRQ_PINS_MASK_16L(p, base) \
+ { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_MASK_16H(p, base) \
+ { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_PRIO_16L(p, base) \
+ { base + 0x10, 0, 32, 4, /* INTPRI00A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x14, 0, 32, 4, /* INTPRI10A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_PRIO_16H(p, base) \
+ { base + 0x18, 0, 32, 4, /* INTPRI20A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_SENSE_16L(p, base) \
+ { base + 0x00, 32, 4, /* ICR1A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x04, 32, 4, /* ICR2A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_SENSE_16H(p, base) \
+ { base + 0x08, 32, 4, /* ICR3A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x0c, 32, 4, /* ICR4A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_ACK_16L(p, base) \
+ { base + 0x20, 0, 8, /* INTREQ00A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x24, 0, 8, /* INTREQ10A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_ACK_16H(p, base) \
+ { base + 0x28, 0, 8, /* INTREQ20A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x2c, 0, 8, /* INTREQ30A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_16(p, base, vect, str) \
+ \
+static struct resource p ## _resources[] __initdata = { \
+ [0] = { \
+ .start = base, \
+ .end = base + 0x64, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+}; \
+ \
+enum { \
+ p ## _UNUSED = 0, \
+ INTC_IRQ_PINS_ENUM_16L(p), \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ INTC_IRQ_PINS_VECT_16L(p, vect), \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ INTC_IRQ_PINS_MASK_16L(p, base), \
+}; \
+ \
+static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
+ INTC_IRQ_PINS_PRIO_16L(p, base), \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ INTC_IRQ_PINS_SENSE_16L(p, base), \
+}; \
+ \
+static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
+ INTC_IRQ_PINS_ACK_16L(p, base), \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .resource = p ## _resources, \
+ .num_resources = ARRAY_SIZE(p ## _resources), \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, p ## _prio_registers, \
+ p ## _sense_registers, p ## _ack_registers) \
+}
+
+#define INTC_IRQ_PINS_32(p, base, vect, str) \
+ \
+static struct resource p ## _resources[] __initdata = { \
+ [0] = { \
+ .start = base, \
+ .end = base + 0x6c, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+}; \
+ \
+enum { \
+ p ## _UNUSED = 0, \
+ INTC_IRQ_PINS_ENUM_16L(p), \
+ INTC_IRQ_PINS_ENUM_16H(p), \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ INTC_IRQ_PINS_VECT_16L(p, vect), \
+ INTC_IRQ_PINS_VECT_16H(p, vect), \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ INTC_IRQ_PINS_MASK_16L(p, base), \
+ INTC_IRQ_PINS_MASK_16H(p, base), \
+}; \
+ \
+static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
+ INTC_IRQ_PINS_PRIO_16L(p, base), \
+ INTC_IRQ_PINS_PRIO_16H(p, base), \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ INTC_IRQ_PINS_SENSE_16L(p, base), \
+ INTC_IRQ_PINS_SENSE_16H(p, base), \
+}; \
+ \
+static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
+ INTC_IRQ_PINS_ACK_16L(p, base), \
+ INTC_IRQ_PINS_ACK_16H(p, base), \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .resource = p ## _resources, \
+ .num_resources = ARRAY_SIZE(p ## _resources), \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, p ## _prio_registers, \
+ p ## _sense_registers, p ## _ack_registers) \
+}
+
+#define INTC_PINT_E_EMPTY
+#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
+#define INTC_PINT_E(p) \
+ PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \
+ PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
+
+#define INTC_PINT_V_NONE
+#define INTC_PINT_V(p, vect) \
+ vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \
+ vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \
+ vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \
+ vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
+
+#define INTC_PINT(p, mask_reg, sense_base, str, \
+ enums_1, enums_2, enums_3, enums_4, \
+ vect_1, vect_2, vect_3, vect_4, \
+ mask_a, mask_b, mask_c, mask_d, \
+ sense_a, sense_b, sense_c, sense_d) \
+ \
+enum { \
+ PINT ## p ## _UNUSED = 0, \
+ enums_1 enums_2 enums_3 enums_4 \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ vect_1 vect_2 vect_3 vect_4 \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ { mask_reg, 0, 32, /* PINTER */ \
+ { mask_a mask_b mask_c mask_d } } \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ { sense_base + 0x00, 16, 2, /* PINTCR */ \
+ { sense_a } }, \
+ { sense_base + 0x04, 16, 2, /* PINTCR */ \
+ { sense_b } }, \
+ { sense_base + 0x08, 16, 2, /* PINTCR */ \
+ { sense_c } }, \
+ { sense_base + 0x0c, 16, 2, /* PINTCR */ \
+ { sense_d } }, \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, NULL, \
+ p ## _sense_registers, NULL), \
+}
+
+#endif /* __ASM_MACH_INTC_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 216c3d6..18ae6a9 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -451,11 +451,23 @@
GPIO_FN_KEYIN5_PU,
GPIO_FN_KEYIN6_PU,
GPIO_FN_KEYIN7_PU,
+ GPIO_FN_SDHICD0_PU,
+ GPIO_FN_SDHID0_0_PU,
+ GPIO_FN_SDHID0_1_PU,
+ GPIO_FN_SDHID0_2_PU,
+ GPIO_FN_SDHID0_3_PU,
+ GPIO_FN_SDHICMD0_PU,
+ GPIO_FN_SDHIWP0_PU,
GPIO_FN_SDHID1_0_PU,
GPIO_FN_SDHID1_1_PU,
GPIO_FN_SDHID1_2_PU,
GPIO_FN_SDHID1_3_PU,
GPIO_FN_SDHICMD1_PU,
+ GPIO_FN_SDHID2_0_PU,
+ GPIO_FN_SDHID2_1_PU,
+ GPIO_FN_SDHID2_2_PU,
+ GPIO_FN_SDHID2_3_PU,
+ GPIO_FN_SDHICMD2_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
GPIO_FN_FSIACK_PU,
@@ -463,6 +475,7 @@
GPIO_FN_FSIAIBT_PU,
GPIO_FN_FSIAISLD_PU,
};
+
/* DMA slave IDs */
enum {
SHDMA_SLAVE_INVALID,
@@ -494,4 +507,8 @@
SHDMA_SLAVE_MMCIF_RX,
};
+/* PINT interrupts are located at Linux IRQ 768 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+
#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
index cc442d1..cfde9bf 100644
--- a/arch/arm/mach-shmobile/intc-sh7367.c
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -31,8 +32,6 @@
DISABLED,
/* interrupt sources INTCA */
- IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
- IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
DIRC,
CRYPT1_ERR, CRYPT2_STD,
IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
@@ -76,14 +75,6 @@
};
static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
- INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
- INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
- INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
- INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
- INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
- INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
- INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
INTC_VECT(DIRC, 0x0560),
INTC_VECT(CRYPT1_ERR, 0x05e0),
INTC_VECT(CRYPT2_STD, 0x0700),
@@ -163,10 +154,6 @@
};
static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
{ DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
@@ -212,11 +199,6 @@
};
static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6900010, 0, 32, 4, /* INTPRI00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900014, 0, 32, 4, /* INTPRI10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-
{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
@@ -240,29 +222,18 @@
{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
};
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
- { 0xe6900000, 16, 2, /* ICR1A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900004, 16, 2, /* ICR2A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
- { 0xe6900020, 0, 8, /* INTREQ00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900024, 0, 8, /* INTREQ10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-};
-
static struct intc_desc intca_desc __initdata = {
.name = "sh7367-intca",
.force_enable = ENABLED,
.force_disable = DISABLED,
.hw = INTC_HW_DESC(intca_vectors, intca_groups,
intca_mask_registers, intca_prio_registers,
- intca_sense_registers, intca_ack_registers),
+ NULL, NULL),
};
+INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "sh7367-intca-irq-pins");
+
enum {
UNUSED_INTCS = 0,
@@ -432,6 +403,7 @@
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intcs_desc);
/* demux using INTEVTSA */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 29cdc05..2d8856d 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -29,10 +30,6 @@
UNUSED_INTCA = 0,
/* interrupt sources INTCA */
- IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
- IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
- IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
- IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
DIRC,
CRYPT_STD,
IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
@@ -86,22 +83,6 @@
};
static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
- INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
- INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
- INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
- INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
- INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
- INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
- INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
- INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
- INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
- INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
- INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
- INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
- INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
- INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
INTC_VECT(DIRC, 0x0560),
INTC_VECT(CRYPT_STD, 0x0700),
INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
@@ -203,15 +184,6 @@
};
static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
{ DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
@@ -282,15 +254,6 @@
};
static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6900010, 0, 32, 4, /* INTPRI00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900014, 0, 32, 4, /* INTPRI10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900018, 0, 32, 4, /* INTPRI20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690001c, 0, 32, 4, /* INTPRI30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
@@ -336,33 +299,13 @@
{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
};
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
- { 0xe6900000, 32, 4, /* ICR1A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900004, 32, 4, /* ICR2A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900008, 32, 4, /* ICR3A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690000c, 32, 4, /* ICR4A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
+static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
+ intca_vectors, intca_groups,
+ intca_mask_registers, intca_prio_registers,
+ NULL);
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
- { 0xe6900020, 0, 8, /* INTREQ00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900024, 0, 8, /* INTREQ10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900028, 0, 8, /* INTREQ20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690002c, 0, 8, /* INTREQ30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca",
- intca_vectors, intca_groups,
- intca_mask_registers, intca_prio_registers,
- intca_sense_registers, intca_ack_registers);
-
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "sh7372-intca-irq-pins");
enum {
UNUSED_INTCS = 0,
ENABLED_INTCS,
@@ -618,6 +561,7 @@
intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intcs_desc);
/* demux using INTEVTSA */
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
index fe45154..2af4e6e 100644
--- a/arch/arm/mach-shmobile/intc-sh7377.c
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -31,10 +32,6 @@
DISABLED,
/* interrupt sources INTCA */
- IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
- IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
- IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
- IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
DIRC,
_2DG,
CRYPT_STD,
@@ -91,22 +88,6 @@
};
static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
- INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
- INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
- INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
- INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
- INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
- INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
- INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
- INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
- INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
- INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
- INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
- INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
- INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
- INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
INTC_VECT(DIRC, 0x0560),
INTC_VECT(_2DG, 0x05e0),
INTC_VECT(CRYPT_STD, 0x0700),
@@ -203,15 +184,6 @@
};
static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
{ DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
@@ -273,15 +245,6 @@
};
static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6900010, 0, 32, 4, /* INTPRI00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900014, 0, 32, 4, /* INTPRI10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900018, 0, 32, 4, /* INTPRI10A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690001c, 0, 32, 4, /* INTPRI30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
@@ -315,37 +278,18 @@
{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
};
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
- { 0xe6900000, 16, 2, /* ICR1A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900004, 16, 2, /* ICR2A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900008, 16, 2, /* ICR3A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690000c, 16, 2, /* ICR4A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
- { 0xe6900020, 0, 8, /* INTREQ00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900024, 0, 8, /* INTREQ10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900028, 0, 8, /* INTREQ20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690002c, 0, 8, /* INTREQ30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
static struct intc_desc intca_desc __initdata = {
.name = "sh7377-intca",
.force_enable = ENABLED,
.force_disable = DISABLED,
.hw = INTC_HW_DESC(intca_vectors, intca_groups,
intca_mask_registers, intca_prio_registers,
- intca_sense_registers, intca_ack_registers),
+ NULL, NULL),
};
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "sh7377-intca-irq-pins");
+
/* this macro ignore entry which is also in INTCA */
#define __IGNORE(a...)
#define __IGNORE0(a...) 0
@@ -638,6 +582,7 @@
void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intcs_desc);
/* demux using INTEVTSA */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index a911a60..1eda6b0 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -22,6 +22,8 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
+#include <mach/sh73a0.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -255,20 +257,205 @@
return 0; /* always allow wakeup */
}
+#define RELOC_BASE 0x1000
+
+/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
+
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
+
+static int to_gic_irq(struct irq_data *data)
+{
+ unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
+
+ if (vect >= 0x3200)
+ vect -= 0x3000;
+ else
+ vect -= 0x0200;
+
+ return gic_spi((vect >> 5) + 1);
+}
+
+static int to_intca_reloc_irq(struct irq_data *data)
+{
+ return data->irq + (RELOC_BASE >> 5);
+}
+
+#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
+#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
+
+static void intca_gic_enable(struct irq_data *data)
+{
+ irq_cb(irq_unmask, to_intca_reloc_irq(data));
+ irq_cb(irq_unmask, to_gic_irq(data));
+}
+
+static void intca_gic_disable(struct irq_data *data)
+{
+ irq_cb(irq_mask, to_gic_irq(data));
+ irq_cb(irq_mask, to_intca_reloc_irq(data));
+}
+
+static void intca_gic_mask_ack(struct irq_data *data)
+{
+ irq_cb(irq_mask, to_gic_irq(data));
+ irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
+}
+
+static void intca_gic_eoi(struct irq_data *data)
+{
+ irq_cb(irq_eoi, to_gic_irq(data));
+}
+
+static int intca_gic_set_type(struct irq_data *data, unsigned int type)
+{
+ return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
+}
+
+static int intca_gic_set_wake(struct irq_data *data, unsigned int on)
+{
+ return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on);
+}
+
+#ifdef CONFIG_SMP
+static int intca_gic_set_affinity(struct irq_data *data,
+ const struct cpumask *cpumask,
+ bool force)
+{
+ return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
+}
+#endif
+
+struct irq_chip intca_gic_irq_chip = {
+ .name = "INTCA-GIC",
+ .irq_mask = intca_gic_disable,
+ .irq_unmask = intca_gic_enable,
+ .irq_mask_ack = intca_gic_mask_ack,
+ .irq_eoi = intca_gic_eoi,
+ .irq_enable = intca_gic_enable,
+ .irq_disable = intca_gic_disable,
+ .irq_shutdown = intca_gic_disable,
+ .irq_set_type = intca_gic_set_type,
+ .irq_set_wake = intca_gic_set_wake,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = intca_gic_set_affinity,
+#endif
+};
+
+static int to_intc_vect(int irq)
+{
+ unsigned int irq_pin = irq - gic_spi(1);
+ unsigned int offs;
+
+ if (irq_pin < 16)
+ offs = 0x0200;
+ else
+ offs = 0x3000;
+
+ return offs + (irq_pin << 5);
+}
+
+static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
+{
+ generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
+ return IRQ_HANDLED;
+}
+
+static struct irqaction sh73a0_irq_pin_cascade[32];
+
+#define PINTER0 0xe69000a0
+#define PINTER1 0xe69000a4
+#define PINTRR0 0xe69000d0
+#define PINTRR1 0xe69000d4
+
+#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
+#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
+#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
+#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
+#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
+
+INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0", \
+ INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \
+ INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ), \
+ INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ), \
+ INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \
+ INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
+
+INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1", \
+ INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
+ INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE, \
+ INTC_PINT_V_NONE, INTC_PINT_V_NONE, \
+ INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
+ INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
+
+static struct irqaction sh73a0_pint0_cascade;
+static struct irqaction sh73a0_pint1_cascade;
+
+static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
+{
+ unsigned long value = ioread32(rr) & ioread32(er);
+ int k;
+
+ for (k = 0; k < 32; k++) {
+ if (value & (1 << (31 - k))) {
+ generic_handle_irq(base_irq + k);
+ iowrite32(~(1 << (31 - k)), rr);
+ }
+ }
+}
+
+static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
+{
+ pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0));
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
+{
+ pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0));
+ return IRQ_HANDLED;
+}
+
void __init sh73a0_init_irq(void)
{
void __iomem *gic_dist_base = __io(0xf0001000);
void __iomem *gic_cpu_base = __io(0xf0000100);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+ int k, n;
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
+ register_intc_controller(&intca_irq_pins_desc);
+ register_intc_controller(&intc_pint0_desc);
+ register_intc_controller(&intc_pint1_desc);
/* demux using INTEVTSA */
sh73a0_intcs_cascade.name = "INTCS cascade";
sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
sh73a0_intcs_cascade.dev_id = intevtsa;
setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
+
+ /* IRQ pins require special handling through INTCA and GIC */
+ for (k = 0; k < 32; k++) {
+ sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
+ sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
+ setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
+
+ n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+ irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
+ handle_level_irq, "level");
+ set_irq_flags(n, IRQF_VALID); /* yuck */
+ }
+
+ /* PINT pins are sanely tied to the GIC as SPI */
+ sh73a0_pint0_cascade.name = "PINT0 cascade";
+ sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
+ setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
+
+ sh73a0_pint1_cascade.name = "PINT1 cascade";
+ sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
+ setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
}
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 3eed44e..5abe02f 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <mach/sh73a0.h>
+#include <mach/irqs.h>
#define _1(fn, pfx, sfx) fn(pfx, sfx)
@@ -488,13 +489,26 @@
KEYIN5_PU_MARK,
KEYIN6_PU_MARK,
KEYIN7_PU_MARK,
+ SDHICD0_PU_MARK,
+ SDHID0_0_PU_MARK,
+ SDHID0_1_PU_MARK,
+ SDHID0_2_PU_MARK,
+ SDHID0_3_PU_MARK,
+ SDHICMD0_PU_MARK,
+ SDHIWP0_PU_MARK,
SDHID1_0_PU_MARK,
SDHID1_1_PU_MARK,
SDHID1_2_PU_MARK,
SDHID1_3_PU_MARK,
SDHICMD1_PU_MARK,
+ SDHID2_0_PU_MARK,
+ SDHID2_1_PU_MARK,
+ SDHID2_2_PU_MARK,
+ SDHID2_3_PU_MARK,
+ SDHICMD2_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
+ FSIBISLD_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
FSIAIBT_PU_MARK,
@@ -1387,19 +1401,28 @@
PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
- PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
- PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
- PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
- PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
+ MSEL4CR_MSEL15_0),
PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
@@ -1516,16 +1539,29 @@
PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
- PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1),
- PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1),
- PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1),
- PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1),
- PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1),
+ PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU),
+ PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
+ PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
+ PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
+ PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
+ PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
+ PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU),
+ PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
+ PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
+ PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
+ PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
+ PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
+ PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
+ PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
+ PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
+ PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
+ PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU,
+ PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
MSEL4CR_MSEL15_1),
+ PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
@@ -2181,11 +2217,23 @@
GPIO_FN(KEYIN5_PU),
GPIO_FN(KEYIN6_PU),
GPIO_FN(KEYIN7_PU),
+ GPIO_FN(SDHICD0_PU),
+ GPIO_FN(SDHID0_0_PU),
+ GPIO_FN(SDHID0_1_PU),
+ GPIO_FN(SDHID0_2_PU),
+ GPIO_FN(SDHID0_3_PU),
+ GPIO_FN(SDHICMD0_PU),
+ GPIO_FN(SDHIWP0_PU),
GPIO_FN(SDHID1_0_PU),
GPIO_FN(SDHID1_1_PU),
GPIO_FN(SDHID1_2_PU),
GPIO_FN(SDHID1_3_PU),
GPIO_FN(SDHICMD1_PU),
+ GPIO_FN(SDHID2_0_PU),
+ GPIO_FN(SDHID2_1_PU),
+ GPIO_FN(SDHID2_2_PU),
+ GPIO_FN(SDHID2_3_PU),
+ GPIO_FN(SDHICMD2_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
GPIO_FN(FSIACK_PU),
@@ -2718,6 +2766,45 @@
{ },
};
+/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
+#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
+
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
+};
+
static struct pinmux_info sh73a0_pinmux_info = {
.name = "sh73a0_pfc",
.reserved_id = PINMUX_RESERVED,
@@ -2738,6 +2825,9 @@
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh73a0_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index e4e485f..c49a833 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -21,9 +21,11 @@
#include <asm/mach-types.h>
#include <mach/common.h>
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+
static unsigned int __init shmobile_smp_get_core_count(void)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
return sh73a0_get_core_count();
return 1;
@@ -31,7 +33,7 @@
static void __init shmobile_smp_prepare_cpus(void)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
sh73a0_smp_prepare_cpus();
}
@@ -39,13 +41,13 @@
{
trace_hardirqs_off();
- if (machine_is_ag5evm())
+ if (is_sh73a0())
sh73a0_secondary_init(cpu);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
return sh73a0_boot_secondary(cpu);
return -ENOSYS;
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index f0394ba..5140dee 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -256,57 +256,8 @@
};
#endif
-#ifdef CONFIG_AB3550_CORE
-static struct abx500_init_settings ab3550_init_settings[] = {
- {
- .bank = 0,
- .reg = AB3550_IMR1,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR2,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR3,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR4,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR5,
- /* The two most significant bits are not used */
- .setting = 0x3f
- },
-};
-
-static struct ab3550_platform_data ab3550_plf_data = {
- .irq = {
- .base = IRQ_AB3550_BASE,
- .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
- },
- .dev_data = {
- },
- .init_settings = ab3550_init_settings,
- .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
-};
-#endif
-
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#if defined(CONFIG_AB3550_CORE)
- {
- .type = "ab3550",
- .addr = 0x4A,
- .irq = IRQ_U300_IRQ0_EXT,
- .platform_data = &ab3550_plf_data,
- },
-#elif defined(CONFIG_AB3100_CORE)
+#ifdef CONFIG_AB3100_CORE
{
.type = "ab3100",
.addr = 0x48,
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index d270fea..db3fbfa 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -117,14 +117,6 @@
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
-/* Optional AB3550 mixsig chip */
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38)
-#else
-#define IRQ_AB3550_END (IRQ_U300_GPIO_END)
-#endif
-
-#define NR_IRQS (IRQ_AB3550_END)
+#define NR_IRQS (IRQ_U300_GPIO_END)
#endif
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index e014aa7..82025ba 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -10,6 +10,7 @@
#include <linux/amba/bus.h>
#include <linux/irq.h>
#include <linux/i2c.h>
+#include <linux/mfd/ab5500/ab5500.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -87,7 +88,6 @@
.brt_val = 0x7F, /* Max brightness */
};
-
static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
{
/* Backlight */
@@ -101,6 +101,30 @@
db5500_add_i2c2(&u5500_i2c2_data);
i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
}
+
+static struct ab5500_platform_data ab5500_plf_data = {
+ .irq = {
+ .base = 0,
+ .count = 0,
+ },
+ .init_settings = NULL,
+ .init_settings_sz = 0,
+ .pm_power_off = false,
+};
+
+static struct platform_device ab5500_device = {
+ .name = "ab5500-core",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab5500_plf_data,
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device *u5500_platform_devices[] __initdata = {
+ &ab5500_device,
+};
+
static void __init u5500_uart_init(void)
{
db5500_add_uart0(NULL);
@@ -115,6 +139,9 @@
u5500_i2c_init();
u5500_sdi_init();
u5500_uart_init();
+
+ platform_add_devices(u5500_platform_devices,
+ ARRAY_SIZE(u5500_platform_devices));
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1405d0e..f418574 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -47,6 +47,6 @@
if (cpu_is_u5500())
db5500_prcmu_early_init();
if (cpu_is_u8500())
- prcmu_early_init();
+ db8500_prcmu_early_init();
clk_init();
}
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 8c5b302..d8973ac 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,6 @@
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_DEV_NAND
- select S3C_GPIO_CFG_S3C24XX
help
Base platform code for any Samsung S3C24XX device
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 0291bd6..b2b0112 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -14,9 +14,7 @@
obj-y += cpu.o
obj-y += irq.o
-obj-y += devs.o
-obj-y += gpio.o
-obj-y += gpiolib.o
+obj-y += dev-uart.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
diff --git a/arch/arm/plat-s3c24xx/dev-uart.c b/arch/arm/plat-s3c24xx/dev-uart.c
new file mode 100644
index 0000000..9ab22e6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/dev-uart.c
@@ -0,0 +1,100 @@
+/* linux/arch/arm/plat-s3c24xx/dev-uart.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX UART resource and platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART0,
+ .end = S3C2410_PA_UART0 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART1,
+ .end = S3C2410_PA_UART1 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART2,
+ .end = S3C2410_PA_UART2 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+ [0] = {
+ .start = S3C2443_PA_UART3,
+ .end = S3C2443_PA_UART3 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX3,
+ .end = IRQ_S3CUART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c2410_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c2410_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c2410_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
+ },
+ [3] = {
+ .resources = s3c2410_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
+ },
+};
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
deleted file mode 100644
index a76bf2d..0000000
--- a/arch/arm/plat-s3c24xx/devs.c
+++ /dev/null
@@ -1,528 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/devs.c
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <plat/udc.h>
-#include <plat/mci.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-spi.h>
-#include <plat/ts.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART0,
- .end = S3C2410_PA_UART0 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart1_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART1,
- .end = S3C2410_PA_UART1 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart2_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART2,
- .end = S3C2410_PA_UART2 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart3_resource[] = {
- [0] = {
- .start = S3C2443_PA_UART3,
- .end = S3C2443_PA_UART3 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
- [0] = {
- .resources = s3c2410_uart0_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
- },
- [1] = {
- .resources = s3c2410_uart1_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
- },
- [2] = {
- .resources = s3c2410_uart2_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
- },
- [3] = {
- .resources = s3c2410_uart3_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
- },
-};
-
-/* LCD Controller */
-
-static struct resource s3c_lcd_resource[] = {
- [0] = {
- .start = S3C24XX_PA_LCD,
- .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_lcd = {
- .name = "s3c2410-lcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_lcd_resource),
- .resource = s3c_lcd_resource,
- .dev = {
- .dma_mask = &s3c_device_lcd_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_lcd);
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
- struct s3c2410fb_mach_info *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
- if (npd) {
- npd->displays = kmemdup(pd->displays,
- sizeof(struct s3c2410fb_display) * npd->num_displays,
- GFP_KERNEL);
- if (!npd->displays)
- printk(KERN_ERR "no memory for LCD display data\n");
- } else {
- printk(KERN_ERR "no memory for LCD platform data\n");
- }
-}
-
-/* Touchscreen */
-
-static struct resource s3c_ts_resource[] = {
- [0] = {
- .start = S3C24XX_PA_ADC,
- .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
-
-};
-
-struct platform_device s3c_device_ts = {
- .name = "s3c2410-ts",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-EXPORT_SYMBOL(s3c_device_ts);
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
- s3c_set_platdata(hard_s3c2410ts_info,
- sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-
-/* USB Device (Gadget)*/
-
-static struct resource s3c_usbgadget_resource[] = {
- [0] = {
- .start = S3C24XX_PA_USBDEV,
- .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_usbgadget = {
- .name = "s3c2410-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
- .resource = s3c_usbgadget_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_usbgadget);
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-
-/* USB High Speed 2.0 Device (Gadget) */
-static struct resource s3c_hsudc_resource[] = {
- [0] = {
- .start = S3C2416_PA_HSUDC,
- .end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_hsudc_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c_device_usb_hsudc = {
- .name = "s3c-hsudc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
- .resource = s3c_hsudc_resource,
- .dev = {
- .dma_mask = &s3c_hsudc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-}
-
-/* IIS */
-
-static struct resource s3c_iis_resource[] = {
- [0] = {
- .start = S3C24XX_PA_IIS,
- .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static u64 s3c_device_iis_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_iis = {
- .name = "s3c24xx-iis",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_iis_resource),
- .resource = s3c_iis_resource,
- .dev = {
- .dma_mask = &s3c_device_iis_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_iis);
-
-/* RTC */
-
-static struct resource s3c_rtc_resource[] = {
- [0] = {
- .start = S3C24XX_PA_RTC,
- .end = S3C24XX_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_TICK,
- .end = IRQ_TICK,
- .flags = IORESOURCE_IRQ
- }
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c2410-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_rtc);
-
-/* ADC */
-
-static struct resource s3c_adc_resource[] = {
- [0] = {
- .start = S3C24XX_PA_ADC,
- .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_adc = {
- .name = "s3c24xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-
-/* SDI */
-
-static struct resource s3c_sdi_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SDI,
- .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SDI,
- .end = IRQ_SDI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_sdi = {
- .name = "s3c2410-sdi",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_sdi_resource),
- .resource = s3c_sdi_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_sdi);
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
- &s3c_device_sdi);
-}
-
-
-/* SPI (0) */
-
-static struct resource s3c_spi0_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SPI,
- .end = S3C24XX_PA_SPI + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi0 = {
- .name = "s3c2410-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_spi0_resource),
- .resource = s3c_spi0_resource,
- .dev = {
- .dma_mask = &s3c_device_spi0_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_spi0);
-
-/* SPI (1) */
-
-static struct resource s3c_spi1_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SPI + S3C2410_SPI1,
- .end = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi1 = {
- .name = "s3c2410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_spi1_resource),
- .resource = s3c_spi1_resource,
- .dev = {
- .dma_mask = &s3c_device_spi1_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_spi1);
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* Camif Controller */
-
-static struct resource s3c_camif_resource[] = {
- [0] = {
- .start = S3C2440_PA_CAMIF,
- .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAM,
- .end = IRQ_CAM,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_camif_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_camif = {
- .name = "s3c2440-camif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_camif_resource),
- .resource = s3c_camif_resource,
- .dev = {
- .dma_mask = &s3c_device_camif_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_camif);
-
-/* AC97 */
-
-static struct resource s3c_ac97_resource[] = {
- [0] = {
- .start = S3C2440_PA_AC97,
- .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3C244x_AC97,
- .end = IRQ_S3C244x_AC97,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "PCM out",
- .start = DMACH_PCM_OUT,
- .end = DMACH_PCM_OUT,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .name = "PCM in",
- .start = DMACH_PCM_IN,
- .end = DMACH_PCM_IN,
- .flags = IORESOURCE_DMA,
- },
- [4] = {
- .name = "Mic in",
- .start = DMACH_MIC_IN,
- .end = DMACH_MIC_IN,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static u64 s3c_device_audio_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ac97_resource),
- .resource = s3c_ac97_resource,
- .dev = {
- .dma_mask = &s3c_device_audio_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_ac97);
-
-/* ASoC I2S */
-
-struct platform_device s3c2412_device_iis = {
- .name = "s3c2412-iis",
- .id = -1,
- .dev = {
- .dma_mask = &s3c_device_audio_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c2412_device_iis);
-
-#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 539bd0e..53754bcf 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1094,14 +1094,14 @@
*
* configure the dma source/destination hardware type and address
*
- * source: S3C2410_DMASRC_HW: source is hardware
- * S3C2410_DMASRC_MEM: source is memory
+ * source: DMA_FROM_DEVICE: source is hardware
+ * DMA_TO_DEVICE: source is memory
*
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(enum dma_ch channel,
- enum s3c2410_dmasrc source,
+ enum dma_data_direction source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1131,7 +1131,7 @@
hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
- case S3C2410_DMASRC_HW:
+ case DMA_FROM_DEVICE:
/* source is hardware */
pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
@@ -1142,7 +1142,7 @@
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
break;
- case S3C2410_DMASRC_MEM:
+ case DMA_TO_DEVICE:
/* source is memory */
pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
deleted file mode 100644
index 2f3d7c0..0000000
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- int ret;
-
- WARN_ON(to); /* should be none of these left */
-
- if (!to) {
- /* if pull is enabled, try first with up, and if that
- * fails, try using down */
-
- ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
- if (ret)
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
- } else {
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
- }
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- /* do this via gpiolib until all users removed */
-
- gpio_request(pin, "temporary");
- gpio_set_value(pin, to);
- gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
-
- return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
-
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
- local_irq_restore(flags);
-
- return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
deleted file mode 100644
index 243b641..0000000
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
- return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- dat = __raw_readl(base + 0x04);
-
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
-
- __raw_writel(dat, base + 0x04);
-
- con &= ~(1 << offset);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
- if (offset < 4)
- return IRQ_EINT0 + offset;
-
- if (offset < 8)
- return IRQ_EINT4 + offset - 4;
-
- return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
- .set_config = s3c_gpio_setcfg_s3c24xx_a,
- .get_config = s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
- [0] = {
- .base = S3C2410_GPACON,
- .pm = __gpio_pm(&s3c_gpio_pm_1bit),
- .config = &s3c24xx_gpiocfg_banka,
- .chip = {
- .base = S3C2410_GPA(0),
- .owner = THIS_MODULE,
- .label = "GPIOA",
- .ngpio = 24,
- .direction_input = s3c24xx_gpiolib_banka_input,
- .direction_output = s3c24xx_gpiolib_banka_output,
- },
- },
- [1] = {
- .base = S3C2410_GPBCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPB(0),
- .owner = THIS_MODULE,
- .label = "GPIOB",
- .ngpio = 16,
- },
- },
- [2] = {
- .base = S3C2410_GPCCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPC(0),
- .owner = THIS_MODULE,
- .label = "GPIOC",
- .ngpio = 16,
- },
- },
- [3] = {
- .base = S3C2410_GPDCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPD(0),
- .owner = THIS_MODULE,
- .label = "GPIOD",
- .ngpio = 16,
- },
- },
- [4] = {
- .base = S3C2410_GPECON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPE(0),
- .label = "GPIOE",
- .owner = THIS_MODULE,
- .ngpio = 16,
- },
- },
- [5] = {
- .base = S3C2410_GPFCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPF(0),
- .owner = THIS_MODULE,
- .label = "GPIOF",
- .ngpio = 8,
- .to_irq = s3c24xx_gpiolib_bankf_toirq,
- },
- },
- [6] = {
- .base = S3C2410_GPGCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .irq_base = IRQ_EINT8,
- .chip = {
- .base = S3C2410_GPG(0),
- .owner = THIS_MODULE,
- .label = "GPIOG",
- .ngpio = 16,
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = S3C2410_GPHCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPH(0),
- .owner = THIS_MODULE,
- .label = "GPIOH",
- .ngpio = 11,
- },
- },
- /* GPIOS for the S3C2443 and later devices. */
- {
- .base = S3C2440_GPJCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPJ(0),
- .owner = THIS_MODULE,
- .label = "GPIOJ",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPKCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPK(0),
- .owner = THIS_MODULE,
- .label = "GPIOK",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPLCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPL(0),
- .owner = THIS_MODULE,
- .label = "GPIOL",
- .ngpio = 15,
- },
- }, {
- .base = S3C2443_GPMCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPM(0),
- .owner = THIS_MODULE,
- .label = "GPIOM",
- .ngpio = 2,
- },
- },
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s3c24xx_gpios;
- int gpn;
-
- for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
- if (!chip->config)
- chip->config = &s3c24xx_gpiocfg_default;
-
- s3c_gpiolib_add(chip);
- }
-
- return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/plat-s3c24xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
deleted file mode 100644
index a087de2..0000000
--- a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C24xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C2410_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << (1 + tcfg1);
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 0;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div) - 1;
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
deleted file mode 100644
index 005729a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/pll.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C24xx - common pll registers and code
- */
-
-#define S3C24XX_PLLCON_MDIVSHIFT 12
-#define S3C24XX_PLLCON_PDIVSHIFT 4
-#define S3C24XX_PLLCON_SDIVSHIFT 0
-#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
-#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1)
-#define S3C24XX_PLLCON_SDIVMASK 3
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C24XX_PLLCON_MDIVMASK;
- pdiv &= S3C24XX_PLLCON_PDIVMASK;
- sdiv &= S3C24XX_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (mdiv + 8);
- do_div(fvco, (pdiv + 2) << sdiv);
-
- return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_M_SHIFT (14)
-#define S3C2416_PLL_P_SHIFT (5)
-#define S3C2416_PLL_S_MASK (7)
-#define S3C2416_PLL_M_MASK ((1 << 10) - 1)
-#define S3C2416_PLL_P_MASK (63)
-
-static inline unsigned int
-s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int m, p, s;
- uint64_t fvco;
-
- m = pllval >> S3C2416_PLL_M_SHIFT;
- p = pllval >> S3C2416_PLL_P_SHIFT;
-
- s = pllval & S3C2416_PLL_S_MASK;
- m &= S3C2416_PLL_M_MASK;
- p &= S3C2416_PLL_P_MASK;
-
- fvco = (uint64_t)baseclk * m;
- do_div(fvco, (p << s));
-
- return (unsigned int)fvco;
-}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
deleted file mode 100644
index 1b0f4c3..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC (0x00)
-#define S3C2410_DMA_DISRCC (0x04)
-#define S3C2410_DMA_DIDST (0x08)
-#define S3C2410_DMA_DIDSTC (0x0C)
-#define S3C2410_DMA_DCON (0x10)
-#define S3C2410_DMA_DSTAT (0x14)
-#define S3C2410_DMA_DCSRC (0x18)
-#define S3C2410_DMA_DCDST (0x1C)
-#define S3C2410_DMA_DMASKTRIG (0x20)
-#define S3C2412_DMA_DMAREQSEL (0x24)
-#define S3C2443_DMA_DMAREQSEL (0x24)
-
-#define S3C2410_DISRCC_INC (1<<0)
-#define S3C2410_DISRCC_APB (1<<1)
-
-#define S3C2410_DMASKTRIG_STOP (1<<2)
-#define S3C2410_DMASKTRIG_ON (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND (0<<31)
-#define S3C2410_DCON_HANDSHAKE (1<<31)
-#define S3C2410_DCON_SYNC_PCLK (0<<30)
-#define S3C2410_DCON_SYNC_HCLK (1<<30)
-
-#define S3C2410_DCON_INTREQ (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
-#define S3C2410_DCON_CH0_UART0 (1<<24)
-#define S3C2410_DCON_CH0_SDI (2<<24)
-#define S3C2410_DCON_CH0_TIMER (3<<24)
-#define S3C2410_DCON_CH0_USBEP1 (4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
-#define S3C2410_DCON_CH1_UART1 (1<<24)
-#define S3C2410_DCON_CH1_I2SSDI (2<<24)
-#define S3C2410_DCON_CH1_SPI (3<<24)
-#define S3C2410_DCON_CH1_USBEP2 (4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO (0<<24)
-#define S3C2410_DCON_CH2_I2SSDI (1<<24)
-#define S3C2410_DCON_CH2_SDI (2<<24)
-#define S3C2410_DCON_CH2_TIMER (3<<24)
-#define S3C2410_DCON_CH2_USBEP3 (4<<24)
-
-#define S3C2410_DCON_CH3_UART2 (0<<24)
-#define S3C2410_DCON_CH3_SDI (1<<24)
-#define S3C2410_DCON_CH3_SPI (2<<24)
-#define S3C2410_DCON_CH3_TIMER (3<<24)
-#define S3C2410_DCON_CH3_USBEP4 (4<<24)
-
-#define S3C2410_DCON_SRCSHIFT (24)
-#define S3C2410_DCON_SRCMASK (7<<24)
-
-#define S3C2410_DCON_BYTE (0<<20)
-#define S3C2410_DCON_HALFWORD (1<<20)
-#define S3C2410_DCON_WORD (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD (1<<22)
-#define S3C2410_DCON_HWTRIG (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT (1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO (5<<24)
-#define S3C2440_DCON_CH0_PCMIN (6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT (5<<24)
-#define S3C2440_DCON_CH1_SDI (6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN (5<<24)
-#define S3C2440_DCON_CH2_MICIN (6<<24)
-
-#define S3C2440_DCON_CH3_MICIN (5<<24)
-#define S3C2440_DCON_CH3_PCMOUT (6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW (1)
-
-#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW (1)
-
-#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
deleted file mode 100644
index cc44e0e..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON (0x00)
-
-#define S3C2410_IISCON_LRINDEX (1<<8)
-#define S3C2410_IISCON_TXFIFORDY (1<<7)
-#define S3C2410_IISCON_RXFIFORDY (1<<6)
-#define S3C2410_IISCON_TXDMAEN (1<<5)
-#define S3C2410_IISCON_RXDMAEN (1<<4)
-#define S3C2410_IISCON_TXIDLE (1<<3)
-#define S3C2410_IISCON_RXIDLE (1<<2)
-#define S3C2410_IISCON_PSCEN (1<<1)
-#define S3C2410_IISCON_IISEN (1<<0)
-
-#define S3C2410_IISMOD (0x04)
-
-#define S3C2440_IISMOD_MPLL (1<<9)
-#define S3C2410_IISMOD_SLAVE (1<<8)
-#define S3C2410_IISMOD_NOXFER (0<<6)
-#define S3C2410_IISMOD_RXMODE (1<<6)
-#define S3C2410_IISMOD_TXMODE (2<<6)
-#define S3C2410_IISMOD_TXRXMODE (3<<6)
-#define S3C2410_IISMOD_LR_LLOW (0<<5)
-#define S3C2410_IISMOD_LR_RLOW (1<<5)
-#define S3C2410_IISMOD_IIS (0<<4)
-#define S3C2410_IISMOD_MSB (1<<4)
-#define S3C2410_IISMOD_8BIT (0<<3)
-#define S3C2410_IISMOD_16BIT (1<<3)
-#define S3C2410_IISMOD_BITMASK (1<<3)
-#define S3C2410_IISMOD_256FS (0<<2)
-#define S3C2410_IISMOD_384FS (1<<2)
-#define S3C2410_IISMOD_16FS (0<<0)
-#define S3C2410_IISMOD_32FS (1<<0)
-#define S3C2410_IISMOD_48FS (2<<0)
-#define S3C2410_IISMOD_FS_MASK (3<<0)
-
-#define S3C2410_IISPSR (0x08)
-#define S3C2410_IISPSR_INTMASK (31<<5)
-#define S3C2410_IISPSR_INTSHIFT (5)
-#define S3C2410_IISPSR_EXTMASK (31<<0)
-#define S3C2410_IISPSR_EXTSHFIT (0)
-
-#define S3C2410_IISFCON (0x0c)
-
-#define S3C2410_IISFCON_TXDMA (1<<15)
-#define S3C2410_IISFCON_RXDMA (1<<14)
-#define S3C2410_IISFCON_TXENABLE (1<<13)
-#define S3C2410_IISFCON_RXENABLE (1<<12)
-#define S3C2410_IISFCON_TXMASK (0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT (6)
-#define S3C2410_IISFCON_RXMASK (0x3f)
-#define S3C2410_IISFCON_RXSHIFT (0)
-
-#define S3C2410_IISFIFO (0x10)
-#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
deleted file mode 100644
index 892e2f6..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1 (0x20)
-#define S3C2412_SPI1 (0x100)
-
-#define S3C2410_SPCON (0x00)
-
-#define S3C2412_SPCON_RXFIFO_RB2 (0<<14)
-#define S3C2412_SPCON_RXFIFO_RB4 (1<<14)
-#define S3C2412_SPCON_RXFIFO_RB12 (2<<14)
-#define S3C2412_SPCON_RXFIFO_RB14 (3<<14)
-#define S3C2412_SPCON_TXFIFO_RB2 (0<<12)
-#define S3C2412_SPCON_TXFIFO_RB4 (1<<12)
-#define S3C2412_SPCON_TXFIFO_RB12 (2<<12)
-#define S3C2412_SPCON_TXFIFO_RB14 (3<<12)
-#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */
-#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */
-#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */
-#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */
-
-#define S3C2412_SPCON_DIRC_RX (1<<7)
-
-#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */
-#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */
-#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */
-#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select
- 0: slave, 1: master */
-#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */
-
-#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */
-
-
-#define S3C2410_SPSTA (0x04)
-
-#define S3C2412_SPSTA_RXFIFO_AE (1<<11)
-#define S3C2412_SPSTA_TXFIFO_AE (1<<10)
-#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9)
-#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8)
-#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7)
-#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6)
-#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5)
-#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4)
-
-#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */
-#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */
-#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG (1<<3)
-
-#define S3C2410_SPPIN (0x08)
-
-#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED (1<<1)
-#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
-
-#define S3C2410_SPPRE (0x0C)
-#define S3C2410_SPTDAT (0x10)
-#define S3C2410_SPRDAT (0x14)
-
-#define S3C2412_TXFIFO (0x18)
-#define S3C2412_RXFIFO (0x18)
-#define S3C2412_SPFIC (0x24)
-
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
deleted file mode 100644
index f0dd4a4..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7)
-
-#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W
-#define S3C2410_UDC_PWR_RESET (1<<3) // R
-#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W
-#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R
-#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W
-
-#define S3C2410_UDC_PWR_DEFAULT 0x00
-
-#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only)
-#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only)
-#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only)
-#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only)
-#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only)
-#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only)
-#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W
-#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W
-#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W
-#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W
-#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W
-
-#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W
-#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W
-
-
-#define S3C2410_UDC_INDEX_EP0 (0x00)
-#define S3C2410_UDC_INDEX_EP1 (0x01) // ??
-#define S3C2410_UDC_INDEX_EP2 (0x02) // ??
-#define S3C2410_UDC_INDEX_EP3 (0x03) // ??
-#define S3C2410_UDC_INDEX_EP4 (0x04) // ??
-
-#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W
-#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W
-#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only)
-#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only)
-
-#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W
-#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W
-#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W
-#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W
-
-#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W
-#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W
-#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W
-#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R
-#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W
-#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W
-#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2)
-#define S3C2410_UDC_EP0_CSR_DE (1<<3)
-#define S3C2410_UDC_EP0_CSR_SE (1<<4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6)
-#define S3C2410_UDC_EP0_CSR_SSE (1<<7)
-
-#define S3C2410_UDC_MAXP_8 (1<<0)
-#define S3C2410_UDC_MAXP_16 (1<<1)
-#define S3C2410_UDC_MAXP_32 (1<<2)
-#define S3C2410_UDC_MAXP_64 (1<<3)
-
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 59552c0..5a21b15 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -160,6 +160,124 @@
},
};
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static unsigned int *armdiv;
+static int nr_armdiv;
+static int armdivmask;
+
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ unsigned long calc;
+ unsigned best = 256; /* bigger than any value */
+ unsigned div;
+ int ptr;
+
+ if (!nr_armdiv)
+ return -EINVAL;
+
+ for (ptr = 0; ptr < nr_armdiv; ptr++) {
+ div = armdiv[ptr];
+ if (div) {
+ /* cpufreq provides 266mhz as 266666000 not 266666666 */
+ calc = (parent / div / 1000) * 1000;
+ if (calc <= rate && div < best)
+ best = div;
+ }
+ }
+
+ return parent / best;
+}
+
+static unsigned long s3c2443_armclk_getrate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkcon0;
+ int val;
+
+ if (!nr_armdiv || !armdivmask)
+ return -EINVAL;
+
+ clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+ clkcon0 &= armdivmask;
+ val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+ return rate / armdiv[val];
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ unsigned long calc;
+ unsigned div;
+ unsigned best = 256; /* bigger than any value */
+ int ptr;
+ int val = -1;
+
+ if (!nr_armdiv || !armdivmask)
+ return -EINVAL;
+
+ for (ptr = 0; ptr < nr_armdiv; ptr++) {
+ div = armdiv[ptr];
+ if (div) {
+ /* cpufreq provides 266mhz as 266666000 not 266666666 */
+ calc = (parent / div / 1000) * 1000;
+ if (calc <= rate && div < best) {
+ best = div;
+ val = ptr;
+ }
+ }
+ }
+
+ if (val >= 0) {
+ unsigned long clkcon0;
+
+ clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+ clkcon0 &= ~armdivmask;
+ clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+ __raw_writel(clkcon0, S3C2443_CLKDIV0);
+ }
+
+ return (val == -1) ? -EINVAL : 0;
+}
+
+static struct clk clk_armdiv = {
+ .name = "armdiv",
+ .parent = &clk_msysclk.clk,
+ .ops = &(struct clk_ops) {
+ .round_rate = s3c2443_armclk_roundrate,
+ .get_rate = s3c2443_armclk_getrate,
+ .set_rate = s3c2443_armclk_setrate,
+ },
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
+ */
+
+static struct clk *clk_arm_sources[] = {
+ [0] = &clk_armdiv,
+ [1] = &clk_h,
+};
+
+static struct clksrc_clk clk_arm = {
+ .clk = {
+ .name = "armclk",
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_arm_sources,
+ .nr_sources = ARRAY_SIZE(clk_arm_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
+};
+
/* usbhost
*
* usb host bus-clock, usually 48MHz to provide USB bus clock timing
@@ -205,9 +323,64 @@
},
};
+static struct clk clk_i2s_ext = {
+ .name = "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+ .clk = {
+ .name = "i2s-eplldiv",
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+ [0] = &clk_i2s_eplldiv.clk,
+ [1] = &clk_i2s_ext,
+ [2] = &clk_epllref.clk,
+ [3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+ .clk = {
+ .name = "i2s-if",
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
+
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_i2s_srclist,
+ .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
static struct clk init_clocks_off[] = {
{
+ .name = "iis",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIS,
+ }, {
+ .name = "hsspi",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_HSSPI,
+ }, {
.name = "adc",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
@@ -253,6 +426,7 @@
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
.name = "hsmmc",
+ .devname = "s3c-sdhci.1",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_HSMMC,
@@ -347,8 +521,7 @@
/* EPLLCON compatible enough to get on/off information */
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
- fdiv_fn get_fdiv)
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
@@ -368,7 +541,7 @@
pll = get_mpll(mpllcon, xtal);
clk_msysclk.clk.rate = pll;
- fclk = pll / get_fdiv(clkdiv0);
+ fclk = clk_get_rate(&clk_armdiv);
hclk = s3c2443_prediv_getrate(&clk_prediv);
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
@@ -403,20 +576,29 @@
&clk_ext,
&clk_epll,
&clk_usb_bus,
+ &clk_armdiv,
};
static struct clksrc_clk *clksrcs[] __initdata = {
+ &clk_i2s_eplldiv,
+ &clk_i2s,
&clk_usb_bus_host,
&clk_epllref,
&clk_esysclk,
&clk_msysclk,
+ &clk_arm,
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
- fdiv_fn get_fdiv)
+ unsigned int *divs, int nr_divs,
+ int divmask)
