| /* | |
| * Wind River SBC8560 setup and early boot code. | |
| * | |
| * Copyright 2007 Wind River Systems Inc. | |
| * | |
| * By Paul Gortmaker (see MAINTAINERS for contact information) | |
| * | |
| * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/stddef.h> | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/delay.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/of_platform.h> | |
| #include <asm/system.h> | |
| #include <asm/time.h> | |
| #include <asm/machdep.h> | |
| #include <asm/pci-bridge.h> | |
| #include <asm/mpic.h> | |
| #include <mm/mmu_decl.h> | |
| #include <asm/udbg.h> | |
| #include <sysdev/fsl_soc.h> | |
| #include <sysdev/fsl_pci.h> | |
| #ifdef CONFIG_CPM2 | |
| #include <asm/cpm2.h> | |
| #include <sysdev/cpm2_pic.h> | |
| #endif | |
| #ifdef CONFIG_CPM2 | |
| static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) | |
| { | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| int cascade_irq; | |
| while ((cascade_irq = cpm2_get_irq()) >= 0) | |
| generic_handle_irq(cascade_irq); | |
| chip->irq_eoi(&desc->irq_data); | |
| } | |
| #endif /* CONFIG_CPM2 */ | |
| static void __init sbc8560_pic_init(void) | |
| { | |
| struct mpic *mpic; | |
| struct resource r; | |
| struct device_node *np = NULL; | |
| #ifdef CONFIG_CPM2 | |
| int irq; | |
| #endif | |
| np = of_find_node_by_type(np, "open-pic"); | |
| if (!np) { | |
| printk(KERN_ERR "Could not find open-pic node\n"); | |
| return; | |
| } | |
| if (of_address_to_resource(np, 0, &r)) { | |
| printk(KERN_ERR "Could not map mpic register space\n"); | |
| of_node_put(np); | |
| return; | |
| } | |
| mpic = mpic_alloc(np, r.start, | |
| MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, | |
| 0, 256, " OpenPIC "); | |
| BUG_ON(mpic == NULL); | |
| of_node_put(np); | |
| mpic_init(mpic); | |
| #ifdef CONFIG_CPM2 | |
| /* Setup CPM2 PIC */ | |
| np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); | |
| if (np == NULL) { | |
| printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); | |
| return; | |
| } | |
| irq = irq_of_parse_and_map(np, 0); | |
| cpm2_pic_init(np); | |
| of_node_put(np); | |
| irq_set_chained_handler(irq, cpm2_cascade); | |
| #endif | |
| } | |
| /* | |
| * Setup the architecture | |
| */ | |
| #ifdef CONFIG_CPM2 | |
| struct cpm_pin { | |
| int port, pin, flags; | |
| }; | |
| static const struct cpm_pin sbc8560_pins[] = { | |
| /* SCC1 */ | |
| {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, | |
| {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| /* SCC2 */ | |
| {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| /* FCC2 */ | |
| {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, | |
| {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */ | |
| {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */ | |
| /* FCC3 */ | |
| {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, | |
| {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, | |
| {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */ | |
| {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */ | |
| }; | |
| static void __init init_ioports(void) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) { | |
| const struct cpm_pin *pin = &sbc8560_pins[i]; | |
| cpm2_set_pin(pin->port, pin->pin, pin->flags); | |
| } | |
| cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); | |
| cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); | |
| cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); | |
| cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); | |
| cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); | |
| cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); | |
| cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); | |
| cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); | |
| } | |
| #endif | |
| static void __init sbc8560_setup_arch(void) | |
| { | |
| #ifdef CONFIG_PCI | |
| struct device_node *np; | |
| #endif | |
| if (ppc_md.progress) | |
| ppc_md.progress("sbc8560_setup_arch()", 0); | |
| #ifdef CONFIG_CPM2 | |
| cpm2_reset(); | |
| init_ioports(); | |
| #endif | |
| #ifdef CONFIG_PCI | |
| for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") | |
| fsl_add_bridge(np, 1); | |
| #endif | |
| } | |
| static void sbc8560_show_cpuinfo(struct seq_file *m) | |
| { | |
| uint pvid, svid, phid1; | |
| pvid = mfspr(SPRN_PVR); | |
| svid = mfspr(SPRN_SVR); | |
| seq_printf(m, "Vendor\t\t: Wind River\n"); | |
| seq_printf(m, "PVR\t\t: 0x%x\n", pvid); | |
| seq_printf(m, "SVR\t\t: 0x%x\n", svid); | |
| /* Display cpu Pll setting */ | |
| phid1 = mfspr(SPRN_HID1); | |
| seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); | |
| } | |
| static struct of_device_id __initdata of_bus_ids[] = { | |
| { .name = "soc", }, | |
| { .type = "soc", }, | |
| { .name = "cpm", }, | |
| { .name = "localbus", }, | |
| { .compatible = "simple-bus", }, | |
| { .compatible = "gianfar", }, | |
| {}, | |
| }; | |
| static int __init declare_of_platform_devices(void) | |
| { | |
| of_platform_bus_probe(NULL, of_bus_ids, NULL); | |
| return 0; | |
| } | |
| machine_device_initcall(sbc8560, declare_of_platform_devices); | |
| /* | |
| * Called very early, device-tree isn't unflattened | |
| */ | |
| static int __init sbc8560_probe(void) | |
| { | |
| unsigned long root = of_get_flat_dt_root(); | |
| return of_flat_dt_is_compatible(root, "SBC8560"); | |
| } | |
| #ifdef CONFIG_RTC_DRV_M48T59 | |
| static int __init sbc8560_rtc_init(void) | |
| { | |
| struct device_node *np; | |
| struct resource res; | |
| struct platform_device *rtc_dev; | |
| np = of_find_compatible_node(NULL, NULL, "m48t59"); | |
| if (np == NULL) { | |
| printk("No RTC in DTB. Has it been eaten by wild dogs?\n"); | |
| return -ENODEV; | |
| } | |
| of_address_to_resource(np, 0, &res); | |
| of_node_put(np); | |
| printk("Found RTC (m48t59) at i/o 0x%x\n", res.start); | |
| rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1); | |
| if (IS_ERR(rtc_dev)) { | |
| printk("Registering sbc8560 RTC device failed\n"); | |
| return PTR_ERR(rtc_dev); | |
| } | |
| return 0; | |
| } | |
| arch_initcall(sbc8560_rtc_init); | |
| #endif /* M48T59 */ | |
| static __u8 __iomem *brstcr; | |
| static int __init sbc8560_bdrstcr_init(void) | |
| { | |
| struct device_node *np; | |
| struct resource res; | |
| np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr"); | |
| if (np == NULL) { | |
| printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n"); | |
| return -ENODEV; | |
| } | |
| of_address_to_resource(np, 0, &res); | |
| printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res); | |
| brstcr = ioremap(res.start, resource_size(&res)); | |
| if(!brstcr) | |
| printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n"); | |
| of_node_put(np); | |
| return 0; | |
| } | |
| arch_initcall(sbc8560_bdrstcr_init); | |
| void sbc8560_rstcr_restart(char * cmd) | |
| { | |
| local_irq_disable(); | |
| if(brstcr) | |
| clrbits8(brstcr, 0x80); | |
| while(1); | |
| } | |
| define_machine(sbc8560) { | |
| .name = "SBC8560", | |
| .probe = sbc8560_probe, | |
| .setup_arch = sbc8560_setup_arch, | |
| .init_IRQ = sbc8560_pic_init, | |
| .show_cpuinfo = sbc8560_show_cpuinfo, | |
| .get_irq = mpic_get_irq, | |
| .restart = sbc8560_rstcr_restart, | |
| .calibrate_decr = generic_calibrate_decr, | |
| .progress = udbg_progress, | |
| }; |