diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 100396f..395e05f 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -51,6 +51,8 @@ &vaux4 {
 
 &mcbsp2 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
 };
 
 &charger {
@@ -102,35 +104,18 @@ video_reg: video_reg {
 		regulator-max-microvolt = <3300000>;
 	};
 
-	lcd0: display@0 {
-		compatible = "panel-dpi";
-		label = "28";
-		status = "okay";
-		/* default-on; */
+	lcd0: display {
+		/* This isn't the exact LCD, but the timings meet spec */
+		compatible = "logicpd,type28";
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_pin>;
-		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+		backlight = <&bl>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
 			};
 		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <2>;
-			vsync-len = <11>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-			de-active = <1>;
-			pixelclk-active = <0>;
-		};
 	};
 
 	bl: backlight {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 381f0e8..b0f6613 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -81,6 +81,8 @@ &vaux4 {
 };
 
 &mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 5da9cff..a82c962 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -488,11 +488,11 @@ rfbi: encoder@0  {
 					};
 				};
 
-				target-module@5000 {
+				target-module@4000 {
 					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x5000 0x4>,
-					      <0x5010 0x4>,
-					      <0x5014 0x4>;
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
 					reg-names = "rev", "sysc", "syss";
 					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 							<SYSC_IDLE_NO>,
@@ -504,7 +504,7 @@ SYSC_OMAP2_SOFTRESET |
 					ti,syss-mask = <1>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					ranges = <0 0x5000 0x1000>;
+					ranges = <0 0x4000 0x1000>;
 
 					dsi1: encoder@0 {
 						compatible = "ti,omap5-dsi";
@@ -514,8 +514,9 @@ dsi1: encoder@0 {
 						reg-names = "proto", "phy", "pll";
 						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
 					};
 				};
 
@@ -545,8 +546,9 @@ dsi2: encoder@0 {
 						reg-names = "proto", "phy", "pll";
 						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
 					};
 				};
 
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 54aff33..bfa5e1b 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -74,7 +74,7 @@ static struct powerdomain *_get_pwrdm(struct device *dev)
 		return pwrdm;
 
 	clk = of_clk_get(dev->of_node->parent, 0);
-	if (!clk) {
+	if (IS_ERR(clk)) {
 		dev_err(dev, "no fck found\n");
 		return NULL;
 	}