Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes I've been accruing over the last few weeks, none
  of them have been severe enough to warrant flushing the queue but it's
  been long enough now that it's a good idea to send them in.

  A handful of them are fixups for QSPI DT/bindings/compatibles, some
  smaller fixes for system DMA clock control and TMU interrupts on i.MX,
  a handful of fixes for OMAP, including a fix for DSI (display) on
  omap5"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
  arm64: dts: ns2: Fixed QSPI compatible string
  ARM: dts: BCM5301X: Fixed QSPI compatible string
  ARM: dts: NSP: Fixed QSPI compatible string
  ARM: dts: bcm: HR2: Fixed QSPI compatible string
  dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
  ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
  arm64: dts: imx8mp: correct sdma1 clk setting
  arm64: dts: imx8mq: Fix TMU interrupt property
  ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
  ARM: dts: vfxxx: Add syscon compatible with OCOTP
  ARM: dts: imx6q-logicpd: Fix broken PWM
  arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
  ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
  ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
  ARM: dts: imx7ulp: Correct gpio ranges
  ARM: dts: ls1021a: fix QuadSPI-memory reg range
  arm64: defconfig: Enable ptn5150 extcon driver
  arm64: defconfig: Enable USB gadget with configfs
  ARM: configs: Update Integrator defconfig
  ARM: dts: omap5: Fix DSI base address and clocks
  ...
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
index f5e518d..62d4ed2 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
@@ -23,8 +23,8 @@
 
 - compatible:
     Must be one of :
-    "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
-    "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs
+    "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI
 						   BRCMSTB  SoCs
     "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
     			     			  			    BRCMSTB  SoCs
@@ -36,8 +36,8 @@
     			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
     			     			  			    BRCMSTB  SoCs
-    "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
-    "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
+    "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"     : MSPI+BSPI on Cygnus, NSP
+    "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"     : NS2 SoCs
 
 - reg:
     Define the bases and ranges of the associated I/O address spaces.
@@ -86,7 +86,7 @@
     spi@f03e3400 {
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
-		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
+		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
 		reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
 		reg-names = "cs_reg", "mspi", "bspi";
 		interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
@@ -149,7 +149,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&upg_fixed>;
-		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
+		compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
 		reg = <0xf0416000 0x180>;
 		reg-names = "mspi";
 		interrupts = <0x14>;
@@ -160,7 +160,7 @@
 iProc SoC Example:
 
     qspi: spi@18027200 {
-	compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+	compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 	reg = <0x18027200 0x184>,
 	      <0x18027000 0x124>,
 	      <0x1811c408 0x004>,
@@ -191,7 +191,7 @@
  NS2 SoC Example:
 
 	       qspi: spi@66470200 {
-		       compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+		       compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
 		       reg = <0x66470200 0x184>,
 			     <0x66470000 0x124>,
 			     <0x67017408 0x004>,
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index cbebed5..e8df458 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -217,7 +217,7 @@
 		};
 
 		qspi: spi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 0346ea6..c846fa3 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -284,7 +284,7 @@
 		};
 
 		qspi: spi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 2d9b4dd..0016720 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -488,7 +488,7 @@
 	};
 
 	spi@18029200 {
-		compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 		reg = <0x18029200 0x184>,
 		      <0x18029000 0x124>,
 		      <0x1811b408 0x004>,
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index 7a3d1d3..8f94364 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -13,7 +13,7 @@
 
 	backlight: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 20000>;
+		pwms = <&pwm3 0 20000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_lcd>;
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
index dffafbc..349959d 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -30,7 +30,7 @@
 	};
 
 	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
-	i2c@4 {
+	i2c {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c4>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 7705285..4d01c33 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -22,8 +22,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index 0b02c7e..f4dc462 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -1026,7 +1026,7 @@
 #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x1 0x0
 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
index e5e20b0..7cb6153 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -58,7 +58,7 @@
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&fec1_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 3674396..b7ea37a 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -394,7 +394,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLC>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 0 32>;
+			gpio-ranges = <&iomuxc1 0 0 20>;
 		};
 
 		gpio_ptd: gpio@40af0000 {
@@ -408,7 +408,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLD>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 32 32>;
+			gpio-ranges = <&iomuxc1 0 32 12>;
 		};
 
 		gpio_pte: gpio@40b00000 {
@@ -422,7 +422,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 64 32>;
+			gpio-ranges = <&iomuxc1 0 64 16>;
 		};
 
 		gpio_ptf: gpio@40b10000 {
@@ -436,7 +436,7 @@
 			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
 				 <&pcc3 IMX7ULP_CLK_PCTLF>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc1 0 96 32>;
+			gpio-ranges = <&iomuxc1 0 96 20>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 100396f..395e05f 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -51,6 +51,8 @@
 
 &mcbsp2 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
 };
 
 &charger {
@@ -102,35 +104,18 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	lcd0: display@0 {
-		compatible = "panel-dpi";
-		label = "28";
-		status = "okay";
-		/* default-on; */
+	lcd0: display {
+		/* This isn't the exact LCD, but the timings meet spec */
+		compatible = "logicpd,type28";
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_pin>;
-		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+		backlight = <&bl>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
 			};
 		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <2>;
-			vsync-len = <11>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-			de-active = <1>;
-			pixelclk-active = <0>;
-		};
 	};
 
 	bl: backlight {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 381f0e8..b0f6613 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -81,6 +81,8 @@
 };
 
 &mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 069af9a..827373e 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -182,7 +182,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x1550000 0x0 0x10000>,
-			      <0x0 0x40000000 0x0 0x40000000>;
+			      <0x0 0x40000000 0x0 0x20000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "qspi_en", "qspi";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 5da9cff..a82c962 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -488,11 +488,11 @@
 					};
 				};
 
-				target-module@5000 {
+				target-module@4000 {
 					compatible = "ti,sysc-omap2", "ti,sysc";
-					reg = <0x5000 0x4>,
-					      <0x5010 0x4>,
-					      <0x5014 0x4>;
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
 					reg-names = "rev", "sysc", "syss";
 					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 							<SYSC_IDLE_NO>,
@@ -504,7 +504,7 @@
 					ti,syss-mask = <1>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					ranges = <0 0x5000 0x1000>;
+					ranges = <0 0x4000 0x1000>;
 
 					dsi1: encoder@0 {
 						compatible = "ti,omap5-dsi";
@@ -514,8 +514,9 @@
 						reg-names = "proto", "phy", "pll";
 						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
 					};
 				};
 
@@ -545,8 +546,9 @@
 						reg-names = "proto", "phy", "pll";
 						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
-						clock-names = "fck";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
 					};
 				};
 
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index fc4abef..0013ec3 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -821,7 +821,7 @@
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xffd01000 0x100>;
+			reg = <0xffd00100 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
 			resets = <&rst L4SYSTIMER1_RESET>;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 0fe03aa..2259d11 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -495,7 +495,7 @@
 			};
 
 			ocotp: ocotp@400a5000 {
-				compatible = "fsl,vf610-ocotp";
+				compatible = "fsl,vf610-ocotp", "syscon";
 				reg = <0x400a5000 0x1000>;
 				clocks = <&clks VF610_CLK_OCOTP>;
 			};
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index a9755c5..b06e537 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,13 +1,11 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -15,19 +13,17 @@
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_INTEGRATOR_IMPD1=y
 CONFIG_ARCH_INTEGRATOR_CP=y
-CONFIG_PCI=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPUFREQ_DT=y
-CONFIG_CMA=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -37,6 +33,7 @@
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_PCI=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
@@ -52,9 +49,12 @@
 CONFIG_NETDEVICES=y
 CONFIG_E100=y
 CONFIG_SMC91X=y
+CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_DRM=y
+CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
 CONFIG_FB_MODE_HELPERS=y
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 54aff33..bfa5e1b 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -74,7 +74,7 @@
 		return pwrdm;
 
 	clk = of_clk_get(dev->of_node->parent, 0);
-	if (!clk) {
+	if (IS_ERR(clk)) {
 		dev_err(dev, "no fck found\n");
 		return NULL;
 	}
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 15f7b0e..3980206 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -745,7 +745,7 @@
 		};
 
 		qspi: spi@66470200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+			compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x66470200 0x184>,
 				<0x66470000 0x124>,
 				<0x67017408 0x004>,
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a39f0a1..903c0eb 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -28,6 +28,7 @@
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 9de2aa1..a5154f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -702,7 +702,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MP_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MP_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index f70435c..561fa79 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -423,7 +423,7 @@
 			tmu: tmu@30260000 {
 				compatible = "fsl,imx8mq-tmu";
 				reg = <0x30260000 0x10000>;
-				interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
 				little-endian;
 				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 9174ddc..3ec99f1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -13,6 +13,7 @@
  */
 
 #include <dt-bindings/power/xlnx-zynqmp-power.h>
+#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
 
 / {
 	compatible = "xlnx,zynqmp";
@@ -558,6 +559,15 @@
 			};
 		};
 
+		psgtr: phy@fd400000 {
+			compatible = "xlnx,zynqmp-psgtr-v1.1";
+			status = "disabled";
+			reg = <0x0 0xfd400000 0x0 0x40000>,
+			      <0x0 0xfd3d0000 0x0 0x1000>;
+			reg-names = "serdes", "siou";
+			#phy-cells = <4>;
+		};
+
 		rtc: rtc@ffa60000 {
 			compatible = "xlnx,zynqmp-rtc";
 			status = "disabled";
@@ -601,7 +611,7 @@
 			power-domains = <&zynqmp_firmware PD_SD_1>;
 		};
 
-		smmu: smmu@fd800000 {
+		smmu: iommu@fd800000 {
 			compatible = "arm,mmu-500";
 			reg = <0x0 0xfd800000 0x0 0x20000>;
 			status = "disabled";
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e0f3382..6d04b95 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -724,6 +724,17 @@
 CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_USB_RENESAS_USB3=m
 CONFIG_USB_TEGRA_XUDC=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_FS=y
 CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_FUSB302=m
@@ -914,6 +925,7 @@
 CONFIG_ARCH_K3_AM6_SOC=y
 CONFIG_ARCH_K3_J721E_SOC=y
 CONFIG_TI_SCI_PM_DOMAINS=y
+CONFIG_EXTCON_PTN5150=m
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON_USBC_CROS_EC=y
 CONFIG_IIO=y