| /* | |
| ** asm-m68k/pcmcia.c -- Amiga Linux PCMCIA support | |
| ** most information was found by disassembling card.resource | |
| ** I'm still looking for an official doc ! | |
| ** | |
| ** Copyright 1997 by Alain Malek | |
| ** | |
| ** This file is subject to the terms and conditions of the GNU General Public | |
| ** License. See the file COPYING in the main directory of this archive | |
| ** for more details. | |
| ** | |
| ** Created: 12/10/97 by Alain Malek | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/timer.h> | |
| #include <linux/module.h> | |
| #include <asm/amigayle.h> | |
| #include <asm/amipcmcia.h> | |
| /* gayle config byte for program voltage and access speed */ | |
| static unsigned char cfg_byte = GAYLE_CFG_0V|GAYLE_CFG_150NS; | |
| void pcmcia_reset(void) | |
| { | |
| unsigned long reset_start_time = jiffies; | |
| unsigned char b; | |
| gayle_reset = 0x00; | |
| while (time_before(jiffies, reset_start_time + 1*HZ/100)); | |
| b = gayle_reset; | |
| } | |
| EXPORT_SYMBOL(pcmcia_reset); | |
| /* copy a tuple, including tuple header. return nb bytes copied */ | |
| /* be careful as this may trigger a GAYLE_IRQ_WR interrupt ! */ | |
| int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len) | |
| { | |
| unsigned char id, *dest; | |
| int cnt, pos, len; | |
| dest = tuple; | |
| pos = 0; | |
| id = gayle_attribute[pos]; | |
| while((id != CISTPL_END) && (pos < 0x10000)) { | |
| len = (int)gayle_attribute[pos+2] + 2; | |
| if (id == tuple_id) { | |
| len = (len > max_len)?max_len:len; | |
| for (cnt = 0; cnt < len; cnt++) { | |
| *dest++ = gayle_attribute[pos+(cnt<<1)]; | |
| } | |
| return len; | |
| } | |
| pos += len<<1; | |
| id = gayle_attribute[pos]; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(pcmcia_copy_tuple); | |
| void pcmcia_program_voltage(int voltage) | |
| { | |
| unsigned char v; | |
| switch (voltage) { | |
| case PCMCIA_0V: | |
| v = GAYLE_CFG_0V; | |
| break; | |
| case PCMCIA_5V: | |
| v = GAYLE_CFG_5V; | |
| break; | |
| case PCMCIA_12V: | |
| v = GAYLE_CFG_12V; | |
| break; | |
| default: | |
| v = GAYLE_CFG_0V; | |
| } | |
| cfg_byte = (cfg_byte & 0xfc) | v; | |
| gayle.config = cfg_byte; | |
| } | |
| EXPORT_SYMBOL(pcmcia_program_voltage); | |
| void pcmcia_access_speed(int speed) | |
| { | |
| unsigned char s; | |
| if (speed <= PCMCIA_SPEED_100NS) | |
| s = GAYLE_CFG_100NS; | |
| else if (speed <= PCMCIA_SPEED_150NS) | |
| s = GAYLE_CFG_150NS; | |
| else if (speed <= PCMCIA_SPEED_250NS) | |
| s = GAYLE_CFG_250NS; | |
| else | |
| s = GAYLE_CFG_720NS; | |
| cfg_byte = (cfg_byte & 0xf3) | s; | |
| gayle.config = cfg_byte; | |
| } | |
| EXPORT_SYMBOL(pcmcia_access_speed); | |
| void pcmcia_write_enable(void) | |
| { | |
| gayle.cardstatus = GAYLE_CS_WR|GAYLE_CS_DA; | |
| } | |
| EXPORT_SYMBOL(pcmcia_write_enable); | |
| void pcmcia_write_disable(void) | |
| { | |
| gayle.cardstatus = 0; | |
| } | |
| EXPORT_SYMBOL(pcmcia_write_disable); | |