diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0d..45bc4bb 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 962e711..fb3496a 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1621ad0..3333974 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1667,8 +1667,10 @@
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index a38f802..cb04bd6 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -146,9 +146,6 @@
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ee78a26..ec09c1e 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif