blob: 2c13ec696ac541f96d781c5a94c251bad36e481a [file] [log] [blame]
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
can0 = &can0;
can1 = &can1;
ethernet0 = &fec0;
ethernet1 = &fec1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
usbphy0 = &usbphy0;
usbphy1 = &usbphy1;
};
fxosc: fxosc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
sxosc: sxosc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
reboot: syscon-reboot {
compatible = "syscon-reboot";
regmap = <&src>;
offset = <0x0>;
mask = <0x1000>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&mscm_ir>;
ranges;
aips0: aips-bus@40000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x00070000>;
ranges;
mscm_cpucfg: cpucfg@40001000 {
compatible = "fsl,vf610-mscm-cpucfg", "syscon";
reg = <0x40001000 0x800>;
};
mscm_ir: interrupt-controller@40001800 {
compatible = "fsl,vf610-mscm-ir";
reg = <0x40001800 0x400>;
fsl,cpucfg = <&mscm_cpucfg>;
interrupt-controller;
#interrupt-cells = <2>;
};
edma0: dma-controller@40018000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x40018000 0x2000>,
<0x40024000 0x1000>,
<0x40025000 0x1000>;
dma-channels = <32>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
<9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX0>,
<&clks VF610_CLK_DMAMUX1>;
status = "disabled";
};
can0: flexcan@40020000 {
compatible = "fsl,vf610-flexcan";
reg = <0x40020000 0x4000>;
interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN0>,
<&clks VF610_CLK_FLEXCAN0>;
clock-names = "ipg", "per";
status = "disabled";
};
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
dmas = <&edma0 0 2>,
<&edma0 0 3>;
dma-names = "rx","tx";
status = "disabled";
};
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
dmas = <&edma0 0 4>,
<&edma0 0 5>;
dma-names = "rx","tx";
status = "disabled";
};
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
dmas = <&edma0 0 6>,
<&edma0 0 7>;
dma-names = "rx","tx";
status = "disabled";
};
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
dmas = <&edma0 0 8>,
<&edma0 0 9>;
dma-names = "rx","tx";
status = "disabled";
};
dspi0: dspi0@4002c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <6>;
status = "disabled";
};
dspi1: dspi1@4002d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002d000 0x1000>;
interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
spi-num-chipselects = <4>;
status = "disabled";
};
sai0: sai@4002f000 {
compatible = "fsl,vf610-sai";
reg = <0x4002f000 0x1000>;
interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI0>,
<&clks VF610_CLK_SAI0_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 17>,
<&edma0 0 16>;
status = "disabled";
};
sai1: sai@40030000 {
compatible = "fsl,vf610-sai";
reg = <0x40030000 0x1000>;
interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI1>,
<&clks VF610_CLK_SAI1_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 19>,
<&edma0 0 18>;
status = "disabled";
};
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>,
<&clks VF610_CLK_SAI2_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
status = "disabled";
};
sai3: sai@40032000 {
compatible = "fsl,vf610-sai";
reg = <0x40032000 0x1000>;
interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI3>,
<&clks VF610_CLK_SAI3_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 9>,
<&edma0 1 8>;
status = "disabled";
};
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
pwm0: pwm@40038000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x40038000 0x1000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clks VF610_CLK_FTM0>,
<&clks VF610_CLK_FTM0_EXT_SEL>,
<&clks VF610_CLK_FTM0_FIX_SEL>,
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
status = "disabled";
};
pwm1: pwm@40039000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x40039000 0x1000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clks VF610_CLK_FTM1>,
<&clks VF610_CLK_FTM1_EXT_SEL>,
<&clks VF610_CLK_FTM1_FIX_SEL>,
<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
status = "disabled";
};
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC0>;
clock-names = "adc";
#io-channel-cells = <1>;
status = "disabled";
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
};
tcon0: timing-controller@4003d000 {
compatible = "fsl,vf610-tcon";
reg = <0x4003d000 0x1000>;
clocks = <&clks VF610_CLK_TCON0>;
clock-names = "ipg";
status = "disabled";
};
wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_WDT>;
clock-names = "wdog";
status = "disabled";
};
qspi0: quadspi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
iomuxc: iomuxc@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
};
gpio0: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
};
gpio1: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
};
gpio2: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
};
gpio3: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
};
gpio4: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
};
anatop: anatop@40050000 {
compatible = "fsl,vf610-anatop", "syscon";
reg = <0x40050000 0x400>;
};
usbphy0: usbphy@40050800 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050800 0x400>;
interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY0>;
fsl,anatop = <&anatop>;
status = "disabled";
};
usbphy1: usbphy@40050c00 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050c00 0x400>;
interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
status = "disabled";
};
dcu0: dcu@40058000 {
compatible = "fsl,vf610-dcu";
reg = <0x40058000 0x1200>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DCU0>,
<&clks VF610_CLK_DCU0_DIV>;
clock-names = "dcu", "pix";
fsl,tcon = <&tcon0>;
status = "disabled";
};
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
dmas = <&edma0 0 50>,
<&edma0 0 51>;
dma-names = "rx","tx";
status = "disabled";
};
i2c1: i2c@40067000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40067000 0x1000>;
interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C1>;
clock-names = "ipg";
dmas = <&edma0 0 52>,
<&edma0 0 53>;
dma-names = "rx","tx";
status = "disabled";
};
clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
clocks = <&sxosc>, <&fxosc>;
clock-names = "sxosc", "fxosc";
#clock-cells = <1>;
};
usbdev0: usb@40034000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x40034000 0x800>;
interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC0>;
fsl,usbphy = <&usbphy0>;
fsl,usbmisc = <&usbmisc0 0>;
dr_mode = "peripheral";
status = "disabled";
};
usbmisc0: usb@40034800 {
#index-cells = <1>;
compatible = "fsl,vf610-usbmisc";
reg = <0x40034800 0x200>;
clocks = <&clks VF610_CLK_USBC0>;
status = "disabled";
};
src: src@4006e000 {
compatible = "fsl,vf610-src", "syscon";
reg = <0x4006e000 0x1000>;
interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
};
};
aips1: aips-bus@40080000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40080000 0x0007f000>;
ranges;
edma1: dma-controller@40098000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x40098000 0x2000>,
<0x400a1000 0x1000>,
<0x400a2000 0x1000>;
dma-channels = <32>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
<11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX2>,
<&clks VF610_CLK_DMAMUX3>;
status = "disabled";
};
snvs0: snvs@400a7000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x400a7000 0x2000>;
snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs0>;
offset = <0x34>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
};
};
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
};
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
};
dspi2: dspi2@400ac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x400ac000 0x1000>;
interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI2>;
clock-names = "dspi";
spi-num-chipselects = <2>;
status = "disabled";
};
dspi3: dspi3@400ad000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x400ad000 0x1000>;
interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI3>;
clock-names = "dspi";
spi-num-chipselects = <2>;
status = "disabled";
};
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC1>;
clock-names = "adc";
#io-channel-cells = <1>;
status = "disabled";
fsl,adck-max-frequency = <30000000>, <40000000>,
<20000000>;
};
esdhc0: esdhc@400b1000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b1000 0x1000>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC0>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x1000>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
usbh1: usb@400b4000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x400b4000 0x800>;
interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC1>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
dr_mode = "host";
status = "disabled";
};
usbmisc1: usb@400b4800 {
#index-cells = <1>;
compatible = "fsl,vf610-usbmisc";
reg = <0x400b4800 0x200>;
clocks = <&clks VF610_CLK_USBC1>;
status = "disabled";
};
ftm: ftm@400b8000 {
compatible = "fsl,ftm-timer";
reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ftm-evt", "ftm-src",
"ftm-evt-counter-en", "ftm-src-counter-en";
clocks = <&clks VF610_CLK_FTM2>,
<&clks VF610_CLK_FTM3>,
<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
status = "disabled";
};
qspi1: quadspi@400c4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI1_EN>,
<&clks VF610_CLK_QSPI1>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
dac0: dac@400cc000 {
compatible = "fsl,vf610-dac";
reg = <0x400cc000 1000>;
interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dac";
clocks = <&clks VF610_CLK_DAC0>;
status = "disabled";
};
dac1: dac@400cd000 {
compatible = "fsl,vf610-dac";
reg = <0x400cd000 1000>;
interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dac";
clocks = <&clks VF610_CLK_DAC1>;
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
can1: flexcan@400d4000 {
compatible = "fsl,vf610-flexcan";
reg = <0x400d4000 0x4000>;
interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN1>,
<&clks VF610_CLK_FLEXCAN1>;
clock-names = "ipg", "per";
status = "disabled";
};
nfc: nand@400e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-nfc";
reg = <0x400e0000 0x4000>;
interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_NFC>;
clock-names = "nfc";
status = "disabled";
};
i2c2: i2c@400e6000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x400e6000 0x1000>;
interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C2>;
clock-names = "ipg";
dmas = <&edma0 1 36>,
<&edma0 1 37>;
dma-names = "rx","tx";
status = "disabled";
};
i2c3: i2c@400e7000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x400e7000 0x1000>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C3>;
clock-names = "ipg";
dmas = <&edma0 1 38>,
<&edma0 1 39>;
dma-names = "rx","tx";
status = "disabled";
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 16>, <&adc1 16>;
};
};
};