blob: f085229cf870bc306b95df2dee4eadd9ebdd4b8b [file] [log] [blame]
/*
* Copyright (C) 2000-2007, Axis Communications AB.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/security.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <arch/hwregs/supp_reg.h>
/*
* Determines which bits in CCS the user has access to.
* 1 = access, 0 = no access.
*/
#define CCS_MASK 0x00087c00 /* SXNZVC */
#define SBIT_USER (1 << (S_CCS_BITNR + CCS_SHIFT))
static int put_debugreg(long pid, unsigned int regno, long data);
static long get_debugreg(long pid, unsigned int regno);
static unsigned long get_pseudo_pc(struct task_struct *child);
void deconfigure_bp(long pid);
extern unsigned long cris_signal_return_page;
/*
* Get contents of register REGNO in task TASK.
*/
long get_reg(struct task_struct *task, unsigned int regno)
{
/* USP is a special case, it's not in the pt_regs struct but
* in the tasks thread struct
*/
unsigned long ret;
if (regno <= PT_EDA)
ret = ((unsigned long *)task_pt_regs(task))[regno];
else if (regno == PT_USP)
ret = task->thread.usp;
else if (regno == PT_PPC)
ret = get_pseudo_pc(task);
else if (regno <= PT_MAX)
ret = get_debugreg(task->pid, regno);
else
ret = 0;
return ret;
}
/*
* Write contents of register REGNO in task TASK.
*/
int put_reg(struct task_struct *task, unsigned int regno, unsigned long data)
{
if (regno <= PT_EDA)
((unsigned long *)task_pt_regs(task))[regno] = data;
else if (regno == PT_USP)
task->thread.usp = data;
else if (regno == PT_PPC) {
/* Write pseudo-PC to ERP only if changed. */
if (data != get_pseudo_pc(task))
task_pt_regs(task)->erp = data;
} else if (regno <= PT_MAX)
return put_debugreg(task->pid, regno, data);
else
return -1;
return 0;
}
void user_enable_single_step(struct task_struct *child)
{
unsigned long tmp;
/*
* Set up SPC if not set already (in which case we have no other
* choice but to trust it).
*/
if (!get_reg(child, PT_SPC)) {
/* In case we're stopped in a delay slot. */
tmp = get_reg(child, PT_ERP) & ~1;
put_reg(child, PT_SPC, tmp);
}
tmp = get_reg(child, PT_CCS) | SBIT_USER;
put_reg(child, PT_CCS, tmp);
}
void user_disable_single_step(struct task_struct *child)
{
put_reg(child, PT_SPC, 0);
if (!get_debugreg(child->pid, PT_BP_CTRL)) {
unsigned long tmp;
/* If no h/w bp configured, disable S bit. */
tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
put_reg(child, PT_CCS, tmp);
}
}
/*
* Called by kernel/ptrace.c when detaching.
*
* Make sure the single step bit is not set.
*/
void
ptrace_disable(struct task_struct *child)
{
/* Deconfigure SPC and S-bit. */
user_disable_single_step(child);
put_reg(child, PT_SPC, 0);
/* Deconfigure any watchpoints associated with the child. */
deconfigure_bp(child->pid);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
int ret;
unsigned int regno = addr >> 2;
unsigned long __user *datap = (unsigned long __user *)data;
switch (request) {
/* Read word at location address. */
case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA: {
unsigned long tmp;
int copied;
ret = -EIO;
/* The signal trampoline page is outside the normal user-addressable
* space but still accessible. This is hack to make it possible to
* access the signal handler code in GDB.
*/
if ((addr & PAGE_MASK) == cris_signal_return_page) {
/* The trampoline page is globally mapped, no page table to traverse.*/
tmp = *(unsigned long*)addr;
} else {
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
if (copied != sizeof(tmp))
break;
}
ret = put_user(tmp,datap);
break;
}
/* Read the word at location address in the USER area. */
case PTRACE_PEEKUSR: {
unsigned long tmp;
ret = -EIO;
if ((addr & 3) || regno > PT_MAX)
break;
tmp = get_reg(child, regno);
ret = put_user(tmp, datap);
break;
}
/* Write the word at location address. */
case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
ret = generic_ptrace_pokedata(child, addr, data);
break;
/* Write the word at location address in the USER area. */
case PTRACE_POKEUSR:
ret = -EIO;
if ((addr & 3) || regno > PT_MAX)
break;
if (regno == PT_CCS) {
/* don't allow the tracing process to change stuff like
* interrupt enable, kernel/user bit, dma enables etc.
*/
data &= CCS_MASK;
data |= get_reg(child, PT_CCS) & ~CCS_MASK;
}
if (put_reg(child, regno, data))
break;
ret = 0;
break;
/* Get all GP registers from the child. */
case PTRACE_GETREGS: {
int i;
unsigned long tmp;
for (i = 0; i <= PT_MAX; i++) {
tmp = get_reg(child, i);
if (put_user(tmp, datap)) {
ret = -EFAULT;
goto out_tsk;
}
datap++;
}
ret = 0;
break;
}
/* Set all GP registers in the child. */
case PTRACE_SETREGS: {
int i;
unsigned long tmp;
for (i = 0; i <= PT_MAX; i++) {
if (get_user(tmp, datap)) {
ret = -EFAULT;
goto out_tsk;
}
if (i == PT_CCS) {
tmp &= CCS_MASK;
tmp |= get_reg(child, PT_CCS) & ~CCS_MASK;
}
put_reg(child, i, tmp);
datap++;
}
ret = 0;
break;
}
default:
ret = ptrace_request(child, request, addr, data);
break;
}
out_tsk:
return ret;
}
void do_syscall_trace(void)
{
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return;
if (!(current->ptrace & PT_PTRACED))
return;
/* the 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
/*
* This isn't the same as continuing with a signal, but it will do for
* normal use.
*/
if (current->exit_code) {
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
}
/* Returns the size of an instruction that has a delay slot. */
static int insn_size(struct task_struct *child, unsigned long pc)
{
unsigned long opcode;
int copied;
int opsize = 0;
/* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */
copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0);
if (copied != sizeof(opcode))
return 0;
switch ((opcode & 0x0f00) >> 8) {
case 0x0:
case 0x9:
case 0xb:
opsize = 2;
break;
case 0xe:
case 0xf:
opsize = 6;
break;
case 0xd:
/* Could be 4 or 6; check more bits. */
if ((opcode & 0xff) == 0xff)
opsize = 4;
else
opsize = 6;
break;
default:
panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n",
opcode, pc);
}
return opsize;
}
static unsigned long get_pseudo_pc(struct task_struct *child)
{
/* Default value for PC is ERP. */
unsigned long pc = get_reg(child, PT_ERP);
if (pc & 0x1) {
unsigned long spc = get_reg(child, PT_SPC);
/* Delay slot bit set. Report as stopped on proper
instruction. */
if (spc) {
/* Rely on SPC if set. FIXME: We might want to check
that EXS indicates we stopped due to a single-step
exception. */
pc = spc;
} else {
/* Calculate the PC from the size of the instruction
that the delay slot we're in belongs to. */
pc += insn_size(child, pc & ~1) - 1;
}
}
return pc;
}
static long bp_owner = 0;
/* Reachable from exit_thread in signal.c, so not static. */
void deconfigure_bp(long pid)
{
int bp;
/* Only deconfigure if the pid is the owner. */
if (bp_owner != pid)
return;
for (bp = 0; bp < 6; bp++) {
unsigned long tmp;
/* Deconfigure start and end address (also gets rid of ownership). */
put_debugreg(pid, PT_BP + 3 + (bp * 2), 0);
put_debugreg(pid, PT_BP + 4 + (bp * 2), 0);
/* Deconfigure relevant bits in control register. */
tmp = get_debugreg(pid, PT_BP_CTRL) & ~(3 << (2 + (bp * 4)));
put_debugreg(pid, PT_BP_CTRL, tmp);
}
/* No owner now. */
bp_owner = 0;
}
static int put_debugreg(long pid, unsigned int regno, long data)
{
int ret = 0;
register int old_srs;
#ifdef CONFIG_ETRAX_KGDB
/* Ignore write, but pretend it was ok if value is 0
(we don't want POKEUSR/SETREGS failing unnessecarily). */
return (data == 0) ? ret : -1;
#endif
/* Simple owner management. */
if (!bp_owner)
bp_owner = pid;
else if (bp_owner != pid) {
/* Ignore write, but pretend it was ok if value is 0
(we don't want POKEUSR/SETREGS failing unnessecarily). */
return (data == 0) ? ret : -1;
}
/* Remember old SRS. */
SPEC_REG_RD(SPEC_REG_SRS, old_srs);
/* Switch to BP bank. */
SUPP_BANK_SEL(BANK_BP);
switch (regno - PT_BP) {
case 0:
SUPP_REG_WR(0, data); break;
case 1:
case 2:
if (data)
ret = -1;
break;
case 3:
SUPP_REG_WR(3, data); break;
case 4:
SUPP_REG_WR(4, data); break;
case 5:
SUPP_REG_WR(5, data); break;
case 6:
SUPP_REG_WR(6, data); break;
case 7:
SUPP_REG_WR(7, data); break;
case 8:
SUPP_REG_WR(8, data); break;
case 9:
SUPP_REG_WR(9, data); break;
case 10:
SUPP_REG_WR(10, data); break;
case 11:
SUPP_REG_WR(11, data); break;
case 12:
SUPP_REG_WR(12, data); break;
case 13:
SUPP_REG_WR(13, data); break;
case 14:
SUPP_REG_WR(14, data); break;
default:
ret = -1;
break;
}
/* Restore SRS. */
SPEC_REG_WR(SPEC_REG_SRS, old_srs);
/* Just for show. */
NOP();
NOP();
NOP();
return ret;
}
static long get_debugreg(long pid, unsigned int regno)
{
register int old_srs;
register long data;
if (pid != bp_owner) {
return 0;
}
/* Remember old SRS. */
SPEC_REG_RD(SPEC_REG_SRS, old_srs);
/* Switch to BP bank. */
SUPP_BANK_SEL(BANK_BP);
switch (regno - PT_BP) {
case 0:
SUPP_REG_RD(0, data); break;
case 1:
case 2:
/* error return value? */
data = 0;
break;
case 3:
SUPP_REG_RD(3, data); break;
case 4:
SUPP_REG_RD(4, data); break;
case 5:
SUPP_REG_RD(5, data); break;
case 6:
SUPP_REG_RD(6, data); break;
case 7:
SUPP_REG_RD(7, data); break;
case 8:
SUPP_REG_RD(8, data); break;
case 9:
SUPP_REG_RD(9, data); break;
case 10:
SUPP_REG_RD(10, data); break;
case 11:
SUPP_REG_RD(11, data); break;
case 12:
SUPP_REG_RD(12, data); break;
case 13:
SUPP_REG_RD(13, data); break;
case 14:
SUPP_REG_RD(14, data); break;
default:
/* error return value? */
data = 0;
}
/* Restore SRS. */
SPEC_REG_WR(SPEC_REG_SRS, old_srs);
/* Just for show. */
NOP();
NOP();
NOP();
return data;
}