| /* |
| * include/asm-arm/arch-pnx4008/irqs.h |
| * |
| * PNX4008 IRQ controller driver - header file |
| * |
| * Author: Dmitry Chigirev <source@mvista.com> |
| * |
| * 2005 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| #ifndef __PNX4008_IRQS_h__ |
| #define __PNX4008_IRQS_h__ |
| |
| #define NR_IRQS 96 |
| |
| /*Manual: table 259, page 199*/ |
| |
| /*SUB2 Interrupt Routing (SIC2)*/ |
| |
| #define SIC2_BASE_INT 64 |
| |
| #define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ |
| #define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ |
| #define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ |
| #define GPI_06_INT 92 |
| #define GPI_05_INT 91 |
| #define GPI_04_INT 90 |
| #define GPI_03_INT 89 |
| #define GPI_02_INT 88 |
| #define GPI_01_INT 87 |
| #define GPI_00_INT 86 |
| #define BT_CLKREQ_INT 85 |
| #define SPI1_DATIN_INT 84 |
| #define U5_RX_INT 83 |
| #define SDIO_INT_N 82 |
| #define CAM_HS_INT 81 |
| #define CAM_VS_INT 80 |
| #define GPI_07_INT 79 |
| #define DISP_SYNC_INT 78 |
| #define DSP_INT8 77 |
| #define U7_HCTS_INT 76 |
| #define GPI_10_INT 75 |
| #define GPI_09_INT 74 |
| #define GPI_08_INT 73 |
| #define DSP_INT7 72 |
| #define U2_HCTS_INT 71 |
| #define SPI2_DATIN_INT 70 |
| #define GPIO_05_INT 69 |
| #define GPIO_04_INT 68 |
| #define GPIO_03_INT 67 |
| #define GPIO_02_INT 66 |
| #define GPIO_01_INT 65 |
| #define GPIO_00_INT 64 |
| |
| /*Manual: table 258, page 198*/ |
| |
| /*SUB1 Interrupt Routing (SIC1)*/ |
| |
| #define SIC1_BASE_INT 32 |
| |
| #define USB_I2C_INT 63 |
| #define USB_DEV_HP_INT 62 |
| #define USB_DEV_LP_INT 61 |
| #define USB_DEV_DMA_INT 60 |
| #define USB_HOST_INT 59 |
| #define USB_OTG_ATX_INT_N 58 |
| #define USB_OTG_TIMER_INT 57 |
| #define SW_INT 56 |
| #define SPI1_INT 55 |
| #define KEY_IRQ 54 |
| #define DSP_M_INT 53 |
| #define RTC_INT 52 |
| #define I2C_1_INT 51 |
| #define I2C_2_INT 50 |
| #define PLL1_LOCK_INT 49 |
| #define PLL2_LOCK_INT 48 |
| #define PLL3_LOCK_INT 47 |
| #define PLL4_LOCK_INT 46 |
| #define PLL5_LOCK_INT 45 |
| #define SPI2_INT 44 |
| #define DSP_INT1 43 |
| #define DSP_INT2 42 |
| #define DSP_TDM_INT2 41 |
| #define TS_AUX_INT 40 |
| #define TS_IRQ 39 |
| #define TS_P_INT 38 |
| #define UOUT1_TO_PAD_INT 37 |
| #define GPI_11_INT 36 |
| #define DSP_INT4 35 |
| #define JTAG_COMM_RX_INT 34 |
| #define JTAG_COMM_TX_INT 33 |
| #define DSP_INT3 32 |
| |
| /*Manual: table 257, page 197*/ |
| |
| /*MAIN Interrupt Routing*/ |
| |
| #define MAIN_BASE_INT 0 |
| |
| #define SUB2_FIQ_N 31 /*active low */ |
| #define SUB1_FIQ_N 30 /*active low */ |
| #define JPEG_INT 29 |
| #define DMA_INT 28 |
| #define MSTIMER_INT 27 |
| #define IIR1_INT 26 |
| #define IIR2_INT 25 |
| #define IIR7_INT 24 |
| #define DSP_TDM_INT0 23 |
| #define DSP_TDM_INT1 22 |
| #define DSP_P_INT 21 |
| #define DSP_INT0 20 |
| #define DUM_INT 19 |
| #define UOUT0_TO_PAD_INT 18 |
| #define MP4_ENC_INT 17 |
| #define MP4_DEC_INT 16 |
| #define SD0_INT 15 |
| #define MBX_INT 14 |
| #define SD1_INT 13 |
| #define MS_INT_N 12 |
| #define FLASH_INT 11 /*NAND*/ |
| #define IIR6_INT 10 |
| #define IIR5_INT 9 |
| #define IIR4_INT 8 |
| #define IIR3_INT 7 |
| #define WATCH_INT 6 |
| #define HSTIMER_INT 5 |
| #define ARCH_TIMER_IRQ HSTIMER_INT |
| #define CAM_INT 4 |
| #define PRNG_INT 3 |
| #define CRYPTO_INT 2 |
| #define SUB2_IRQ_N 1 /*active low */ |
| #define SUB1_IRQ_N 0 /*active low */ |
| |
| #define PNX4008_IRQ_TYPES \ |
| { /*IRQ #'s: */ \ |
| IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \ |
| IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \ |
| IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \ |
| IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \ |
| IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \ |
| } |
| |
| /* Start Enable Pin Interrupts - table 58 page 66 */ |
| |
| #define SE_PIN_BASE_INT 32 |
| |
| #define SE_U7_RX_INT 63 |
| #define SE_U7_HCTS_INT 62 |
| #define SE_BT_CLKREQ_INT 61 |
| #define SE_U6_IRRX_INT 60 |
| /*59 unused*/ |
| #define SE_U5_RX_INT 58 |
| #define SE_GPI_11_INT 57 |
| #define SE_U3_RX_INT 56 |
| #define SE_U2_HCTS_INT 55 |
| #define SE_U2_RX_INT 54 |
| #define SE_U1_RX_INT 53 |
| #define SE_DISP_SYNC_INT 52 |
| /*51 unused*/ |
| #define SE_SDIO_INT_N 50 |
| #define SE_MSDIO_START_INT 49 |
| #define SE_GPI_06_INT 48 |
| #define SE_GPI_05_INT 47 |
| #define SE_GPI_04_INT 46 |
| #define SE_GPI_03_INT 45 |
| #define SE_GPI_02_INT 44 |
| #define SE_GPI_01_INT 43 |
| #define SE_GPI_00_INT 42 |
| #define SE_SYSCLKEN_PIN_INT 41 |
| #define SE_SPI1_DATAIN_INT 40 |
| #define SE_GPI_07_INT 39 |
| #define SE_SPI2_DATAIN_INT 38 |
| #define SE_GPI_10_INT 37 |
| #define SE_GPI_09_INT 36 |
| #define SE_GPI_08_INT 35 |
| /*34-32 unused*/ |
| |
| /* Start Enable Internal Interrupts - table 57 page 65 */ |
| |
| #define SE_INT_BASE_INT 0 |
| |
| #define SE_TS_IRQ 31 |
| #define SE_TS_P_INT 30 |
| #define SE_TS_AUX_INT 29 |
| /*27-28 unused*/ |
| #define SE_USB_AHB_NEED_CLK_INT 26 |
| #define SE_MSTIMER_INT 25 |
| #define SE_RTC_INT 24 |
| #define SE_USB_NEED_CLK_INT 23 |
| #define SE_USB_INT 22 |
| #define SE_USB_I2C_INT 21 |
| #define SE_USB_OTG_TIMER_INT 20 |
| |
| #endif /* __PNX4008_IRQS_h__ */ |
