| /* |
| * Copyright 2014 Chen-Yu Tsai |
| * |
| * Chen-Yu Tsai <wens@csie.org> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "skeleton.dtsi" |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include <dt-bindings/pinctrl/sun4i-a10.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| simplefb_lcd: framebuffer@0 { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0"; |
| clocks = <&pll6 0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| clock-frequency = <24000000>; |
| arm,cpu-registers-not-fw-configured; |
| }; |
| |
| cpus { |
| enable-method = "allwinner,sun8i-a23"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: osc24M_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: osc32k_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| |
| pll1: clk@01c20000 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun8i-a23-pll1-clk"; |
| reg = <0x01c20000 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll1"; |
| }; |
| |
| /* dummy clock until actually implemented */ |
| pll5: pll5_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| clock-output-names = "pll5"; |
| }; |
| |
| pll6: clk@01c20028 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun6i-a31-pll6-clk"; |
| reg = <0x01c20028 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll6", "pll6x2"; |
| }; |
| |
| cpu: cpu_clk@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-cpu-clk"; |
| reg = <0x01c20050 0x4>; |
| |
| /* |
| * PLL1 is listed twice here. |
| * While it looks suspicious, it's actually documented |
| * that way both in the datasheet and in the code from |
| * Allwinner. |
| */ |
| clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; |
| clock-output-names = "cpu"; |
| }; |
| |
| axi: axi_clk@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun8i-a23-axi-clk"; |
| reg = <0x01c20050 0x4>; |
| clocks = <&cpu>; |
| clock-output-names = "axi"; |
| }; |
| |
| ahb1: ahb1_clk@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun6i-a31-ahb1-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; |
| clock-output-names = "ahb1"; |
| }; |
| |
| apb1: apb1_clk@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-apb0-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&ahb1>; |
| clock-output-names = "apb1"; |
| }; |
| |
| apb1_gates: clk@01c20068 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun8i-a23-apb1-gates-clk"; |
| reg = <0x01c20068 0x4>; |
| clocks = <&apb1>; |
| clock-indices = <0>, <5>, |
| <12>, <13>; |
| clock-output-names = "apb1_codec", "apb1_pio", |
| "apb1_daudio0", "apb1_daudio1"; |
| }; |
| |
| apb2: clk@01c20058 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-apb1-clk"; |
| reg = <0x01c20058 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; |
| clock-output-names = "apb2"; |
| }; |
| |
| apb2_gates: clk@01c2006c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun8i-a23-apb2-gates-clk"; |
| reg = <0x01c2006c 0x4>; |
| clocks = <&apb2>; |
| clock-indices = <0>, <1>, |
| <2>, <16>, |
| <17>, <18>, |
| <19>, <20>; |
| clock-output-names = "apb2_i2c0", "apb2_i2c1", |
| "apb2_i2c2", "apb2_uart0", |
| "apb2_uart1", "apb2_uart2", |
| "apb2_uart3", "apb2_uart4"; |
| }; |
| |
| mmc0_clk: clk@01c20088 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-mmc-clk"; |
| reg = <0x01c20088 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc0", |
| "mmc0_output", |
| "mmc0_sample"; |
| }; |
| |
| mmc1_clk: clk@01c2008c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-mmc-clk"; |
| reg = <0x01c2008c 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc1", |
| "mmc1_output", |
| "mmc1_sample"; |
| }; |
| |
| mmc2_clk: clk@01c20090 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-mmc-clk"; |
| reg = <0x01c20090 0x4>; |
| clocks = <&osc24M>, <&pll6 0>; |
| clock-output-names = "mmc2", |
| "mmc2_output", |
| "mmc2_sample"; |
| }; |
| |
| usb_clk: clk@01c200cc { |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| compatible = "allwinner,sun8i-a23-usb-clk"; |
| reg = <0x01c200cc 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", |
| "usb_hsic_12M", "usb_ohci0"; |
| }; |
| }; |
| |
| soc@01c00000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dma: dma-controller@01c02000 { |
| compatible = "allwinner,sun8i-a23-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ahb1_gates 6>; |
| resets = <&ahb1_rst 6>; |
| #dma-cells = <1>; |
| }; |
| |
| mmc0: mmc@01c0f000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ahb1_gates 8>, |
| <&mmc0_clk 0>, |
| <&mmc0_clk 1>, |
| <&mmc0_clk 2>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ahb1_rst 8>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@01c10000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ahb1_gates 9>, |
| <&mmc1_clk 0>, |
| <&mmc1_clk 1>, |
| <&mmc1_clk 2>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ahb1_rst 9>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@01c11000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ahb1_gates 10>, |
| <&mmc2_clk 0>, |
| <&mmc2_clk 1>, |
| <&mmc2_clk 2>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ahb1_rst 10>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| ehci0: usb@01c1a000 { |
| compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; |
| reg = <0x01c1a000 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ahb1_gates 26>; |
| resets = <&ahb1_rst 26>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@01c1a400 { |
| compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; |
| reg = <0x01c1a400 0x100>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ahb1_gates 29>, <&usb_clk 16>; |
| resets = <&ahb1_rst 29>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| pio: pinctrl@01c20800 { |
| /* compatible gets set in SoC specific dtsi file */ |
| reg = <0x01c20800 0x400>; |
| /* interrupts get set in SoC specific dtsi file */ |
| clocks = <&apb1_gates 5>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #gpio-cells = <3>; |
| |
| uart0_pins_a: uart0@0 { |
| allwinner,pins = "PF2", "PF4"; |
| allwinner,function = "uart0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| mmc0_pins_a: mmc0@0 { |
| allwinner,pins = "PF0", "PF1", "PF2", |
| "PF3", "PF4", "PF5"; |
| allwinner,function = "mmc0"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| mmc1_pins_a: mmc1@0 { |
| allwinner,pins = "PG0", "PG1", "PG2", |
| "PG3", "PG4", "PG5"; |
| allwinner,function = "mmc1"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| mmc2_8bit_pins: mmc2_8bit { |
| allwinner,pins = "PC5", "PC6", "PC8", |
| "PC9", "PC10", "PC11", |
| "PC12", "PC13", "PC14", |
| "PC15"; |
| allwinner,function = "mmc2"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| pwm0_pins: pwm0 { |
| allwinner,pins = "PH0"; |
| allwinner,function = "pwm0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2c0_pins_a: i2c0@0 { |
| allwinner,pins = "PH2", "PH3"; |
| allwinner,function = "i2c0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2c1_pins_a: i2c1@0 { |
| allwinner,pins = "PH4", "PH5"; |
| allwinner,function = "i2c1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2c2_pins_a: i2c2@0 { |
| allwinner,pins = "PE12", "PE13"; |
| allwinner,function = "i2c2"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| }; |
| |
| ahb1_rst: reset@01c202c0 { |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| reg = <0x01c202c0 0xc>; |
| }; |
| |
| apb1_rst: reset@01c202d0 { |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| reg = <0x01c202d0 0x4>; |
| }; |
| |
| apb2_rst: reset@01c202d8 { |
| #reset-cells = <1>; |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| reg = <0x01c202d8 0x4>; |
| }; |
| |
| timer@01c20c00 { |
| compatible = "allwinner,sun4i-a10-timer"; |
| reg = <0x01c20c00 0xa0>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt0: watchdog@01c20ca0 { |
| compatible = "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pwm: pwm@01c21400 { |
| compatible = "allwinner,sun7i-a20-pwm"; |
| reg = <0x01c21400 0xc>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| lradc: lradc@01c22800 { |
| compatible = "allwinner,sun4i-a10-lradc-keys"; |
| reg = <0x01c22800 0x100>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@01c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 16>; |
| resets = <&apb2_rst 16>; |
| dmas = <&dma 6>, <&dma 6>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@01c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 17>; |
| resets = <&apb2_rst 17>; |
| dmas = <&dma 7>, <&dma 7>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@01c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 18>; |
| resets = <&apb2_rst 18>; |
| dmas = <&dma 8>, <&dma 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@01c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 19>; |
| resets = <&apb2_rst 19>; |
| dmas = <&dma 9>, <&dma 9>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@01c29000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29000 0x400>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb2_gates 20>; |
| resets = <&apb2_rst 20>; |
| dmas = <&dma 10>, <&dma 10>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@01c2ac00 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb2_gates 0>; |
| resets = <&apb2_rst 0>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@01c2b000 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb2_gates 1>; |
| resets = <&apb2_rst 1>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@01c2b400 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb2_gates 2>; |
| resets = <&apb2_rst 2>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| gic: interrupt-controller@01c81000 { |
| compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x1000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| rtc: rtc@01f00000 { |
| compatible = "allwinner,sun6i-a31-rtc"; |
| reg = <0x01f00000 0x54>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| nmi_intc: interrupt-controller@01f00c0c { |
| compatible = "allwinner,sun6i-a31-sc-nmi"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x01f00c0c 0x38>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| prcm@01f01400 { |
| compatible = "allwinner,sun8i-a23-prcm"; |
| reg = <0x01f01400 0x200>; |
| |
| ar100: ar100_clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <1>; |
| clocks = <&osc24M>; |
| clock-output-names = "ar100"; |
| }; |
| |
| ahb0: ahb0_clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <1>; |
| clocks = <&ar100>; |
| clock-output-names = "ahb0"; |
| }; |
| |
| apb0: apb0_clk { |
| compatible = "allwinner,sun8i-a23-apb0-clk"; |
| #clock-cells = <0>; |
| clocks = <&ahb0>; |
| clock-output-names = "apb0"; |
| }; |
| |
| apb0_gates: apb0_gates_clk { |
| compatible = "allwinner,sun8i-a23-apb0-gates-clk"; |
| #clock-cells = <1>; |
| clocks = <&apb0>; |
| clock-output-names = "apb0_pio", "apb0_timer", |
| "apb0_rsb", "apb0_uart", |
| "apb0_i2c"; |
| }; |
| |
| apb0_rst: apb0_rst { |
| compatible = "allwinner,sun6i-a31-clock-reset"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| cpucfg@01f01c00 { |
| compatible = "allwinner,sun8i-a23-cpuconfig"; |
| reg = <0x01f01c00 0x300>; |
| }; |
| |
| r_uart: serial@01f02800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01f02800 0x400>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb0_gates 4>; |
| resets = <&apb0_rst 4>; |
| status = "disabled"; |
| }; |
| |
| r_pio: pinctrl@01f02c00 { |
| compatible = "allwinner,sun8i-a23-r-pinctrl"; |
| reg = <0x01f02c00 0x400>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb0_gates 0>; |
| resets = <&apb0_rst 0>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #gpio-cells = <3>; |
| |
| r_rsb_pins: r_rsb { |
| allwinner,pins = "PL0", "PL1"; |
| allwinner,function = "s_rsb"; |
| allwinner,drive = <SUN4I_PINCTRL_20_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; |
| }; |
| |
| r_uart_pins_a: r_uart@0 { |
| allwinner,pins = "PL2", "PL3"; |
| allwinner,function = "s_uart"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| }; |
| |
| r_rsb: rsb@01f03400 { |
| compatible = "allwinner,sun8i-a23-rsb"; |
| reg = <0x01f03400 0x400>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&apb0_gates 3>; |
| clock-frequency = <3000000>; |
| resets = <&apb0_rst 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_rsb_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| }; |
