blob: 744c9889f88d4f83e27c05687ac14427c833c0c5 [file] [log] [blame]
/*
* core.c -- Voltage/Current Regulator framework.
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
* Copyright 2008 SlimLogic Ltd.
*
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/async.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/module.h>
#define CREATE_TRACE_POINTS
#include <trace/events/regulator.h>
#include "dummy.h"
#include "internal.h"
#define rdev_crit(rdev, fmt, ...) \
pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_err(rdev, fmt, ...) \
pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_warn(rdev, fmt, ...) \
pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_info(rdev, fmt, ...) \
pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
#define rdev_dbg(rdev, fmt, ...) \
pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
static DEFINE_MUTEX(regulator_list_mutex);
static LIST_HEAD(regulator_map_list);
static LIST_HEAD(regulator_ena_gpio_list);
static LIST_HEAD(regulator_supply_alias_list);
static bool has_full_constraints;
static struct dentry *debugfs_root;
static struct class regulator_class;
/*
* struct regulator_map
*
* Used to provide symbolic supply names to devices.
*/
struct regulator_map {
struct list_head list;
const char *dev_name; /* The dev_name() for the consumer */
const char *supply;
struct regulator_dev *regulator;
};
/*
* struct regulator_enable_gpio
*
* Management for shared enable GPIO pin
*/
struct regulator_enable_gpio {
struct list_head list;
struct gpio_desc *gpiod;
u32 enable_count; /* a number of enabled shared GPIO */
u32 request_count; /* a number of requested shared GPIO */
unsigned int ena_gpio_invert:1;
};
/*
* struct regulator_supply_alias
*
* Used to map lookups for a supply onto an alternative device.
*/
struct regulator_supply_alias {
struct list_head list;
struct device *src_dev;
const char *src_supply;
struct device *alias_dev;
const char *alias_supply;
};
static int _regulator_is_enabled(struct regulator_dev *rdev);
static int _regulator_disable(struct regulator_dev *rdev);
static int _regulator_get_voltage(struct regulator_dev *rdev);
static int _regulator_get_current_limit(struct regulator_dev *rdev);
static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
static int _notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data);
static int _regulator_do_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV);
static struct regulator *create_regulator(struct regulator_dev *rdev,
struct device *dev,
const char *supply_name);
static void _regulator_put(struct regulator *regulator);
static struct regulator_dev *dev_to_rdev(struct device *dev)
{
return container_of(dev, struct regulator_dev, dev);
}
static const char *rdev_get_name(struct regulator_dev *rdev)
{
if (rdev->constraints && rdev->constraints->name)
return rdev->constraints->name;
else if (rdev->desc->name)
return rdev->desc->name;
else
return "";
}
static bool have_full_constraints(void)
{
return has_full_constraints || of_have_populated_dt();
}
static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev)
{
if (rdev && rdev->supply)
return rdev->supply->rdev;
return NULL;
}
/**
* regulator_lock_supply - lock a regulator and its supplies
* @rdev: regulator source
*/
static void regulator_lock_supply(struct regulator_dev *rdev)
{
int i;
for (i = 0; rdev; rdev = rdev_get_supply(rdev), i++)
mutex_lock_nested(&rdev->mutex, i);
}
/**
* regulator_unlock_supply - unlock a regulator and its supplies
* @rdev: regulator source
*/
static void regulator_unlock_supply(struct regulator_dev *rdev)
{
struct regulator *supply;
while (1) {
mutex_unlock(&rdev->mutex);
supply = rdev->supply;
if (!rdev->supply)
return;
rdev = supply->rdev;
}
}
/**
* of_get_regulator - get a regulator device node based on supply name
* @dev: Device pointer for the consumer (of regulator) device
* @supply: regulator supply name
*
* Extract the regulator device node corresponding to the supply name.
* returns the device node corresponding to the regulator if found, else
* returns NULL.
*/
static struct device_node *of_get_regulator(struct device *dev, const char *supply)
{
struct device_node *regnode = NULL;
char prop_name[32]; /* 32 is max size of property name */
dev_dbg(dev, "Looking up %s-supply from device tree\n", supply);
snprintf(prop_name, 32, "%s-supply", supply);
regnode = of_parse_phandle(dev->of_node, prop_name, 0);
if (!regnode) {
dev_dbg(dev, "Looking up %s property in node %s failed",
prop_name, dev->of_node->full_name);
return NULL;
}
return regnode;
}
static int _regulator_can_change_status(struct regulator_dev *rdev)
{
if (!rdev->constraints)
return 0;
if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
return 1;
else
return 0;
}
/* Platform voltage constraint check */
static int regulator_check_voltage(struct regulator_dev *rdev,
int *min_uV, int *max_uV)
{
BUG_ON(*min_uV > *max_uV);
if (!rdev->constraints) {
rdev_err(rdev, "no constraints\n");
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
rdev_err(rdev, "voltage operation not allowed\n");
return -EPERM;
}
if (*max_uV > rdev->constraints->max_uV)
*max_uV = rdev->constraints->max_uV;
if (*min_uV < rdev->constraints->min_uV)
*min_uV = rdev->constraints->min_uV;
if (*min_uV > *max_uV) {
rdev_err(rdev, "unsupportable voltage range: %d-%duV\n",
*min_uV, *max_uV);
return -EINVAL;
}
return 0;
}
/* Make sure we select a voltage that suits the needs of all
* regulator consumers
*/
static int regulator_check_consumers(struct regulator_dev *rdev,
int *min_uV, int *max_uV)
{
struct regulator *regulator;
list_for_each_entry(regulator, &rdev->consumer_list, list) {
/*
* Assume consumers that didn't say anything are OK
* with anything in the constraint range.
*/
if (!regulator->min_uV && !regulator->max_uV)
continue;
if (*max_uV > regulator->max_uV)
*max_uV = regulator->max_uV;
if (*min_uV < regulator->min_uV)
*min_uV = regulator->min_uV;
}
if (*min_uV > *max_uV) {
rdev_err(rdev, "Restricting voltage, %u-%uuV\n",
*min_uV, *max_uV);
return -EINVAL;
}
return 0;
}
/* current constraint check */
static int regulator_check_current_limit(struct regulator_dev *rdev,
int *min_uA, int *max_uA)
{
BUG_ON(*min_uA > *max_uA);
if (!rdev->constraints) {
rdev_err(rdev, "no constraints\n");
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
rdev_err(rdev, "current operation not allowed\n");
return -EPERM;
}
if (*max_uA > rdev->constraints->max_uA)
*max_uA = rdev->constraints->max_uA;
if (*min_uA < rdev->constraints->min_uA)
*min_uA = rdev->constraints->min_uA;
if (*min_uA > *max_uA) {
rdev_err(rdev, "unsupportable current range: %d-%duA\n",
*min_uA, *max_uA);
return -EINVAL;
}
return 0;
}
/* operating mode constraint check */
static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
{
switch (*mode) {
case REGULATOR_MODE_FAST:
case REGULATOR_MODE_NORMAL:
case REGULATOR_MODE_IDLE:
case REGULATOR_MODE_STANDBY:
break;
default:
rdev_err(rdev, "invalid mode %x specified\n", *mode);
return -EINVAL;
}
if (!rdev->constraints) {
rdev_err(rdev, "no constraints\n");
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
rdev_err(rdev, "mode operation not allowed\n");
return -EPERM;
}
/* The modes are bitmasks, the most power hungry modes having
* the lowest values. If the requested mode isn't supported
* try higher modes. */
while (*mode) {
if (rdev->constraints->valid_modes_mask & *mode)
return 0;
*mode /= 2;
}
return -EINVAL;
}
/* dynamic regulator mode switching constraint check */
static int regulator_check_drms(struct regulator_dev *rdev)
{
if (!rdev->constraints) {
rdev_err(rdev, "no constraints\n");
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
rdev_dbg(rdev, "drms operation not allowed\n");
return -EPERM;
}
return 0;
}
static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
ssize_t ret;
mutex_lock(&rdev->mutex);
ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
mutex_unlock(&rdev->mutex);
return ret;
}
static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
static ssize_t regulator_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
}
static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
static ssize_t name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", rdev_get_name(rdev));
}
static DEVICE_ATTR_RO(name);
static ssize_t regulator_print_opmode(char *buf, int mode)
{
switch (mode) {
case REGULATOR_MODE_FAST:
return sprintf(buf, "fast\n");
case REGULATOR_MODE_NORMAL:
return sprintf(buf, "normal\n");
case REGULATOR_MODE_IDLE:
return sprintf(buf, "idle\n");
case REGULATOR_MODE_STANDBY:
return sprintf(buf, "standby\n");
}
return sprintf(buf, "unknown\n");
}
static ssize_t regulator_opmode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_opmode(buf, _regulator_get_mode(rdev));
}
static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
static ssize_t regulator_print_state(char *buf, int state)
{
if (state > 0)
return sprintf(buf, "enabled\n");
else if (state == 0)
return sprintf(buf, "disabled\n");
else
return sprintf(buf, "unknown\n");
}
static ssize_t regulator_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
ssize_t ret;
mutex_lock(&rdev->mutex);
ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
mutex_unlock(&rdev->mutex);
return ret;
}
static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
static ssize_t regulator_status_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
int status;
char *label;
status = rdev->desc->ops->get_status(rdev);
if (status < 0)
return status;
switch (status) {
case REGULATOR_STATUS_OFF:
label = "off";
break;
case REGULATOR_STATUS_ON:
label = "on";
break;
case REGULATOR_STATUS_ERROR:
label = "error";
break;
case REGULATOR_STATUS_FAST:
label = "fast";
break;
case REGULATOR_STATUS_NORMAL:
label = "normal";
break;
case REGULATOR_STATUS_IDLE:
label = "idle";
break;
case REGULATOR_STATUS_STANDBY:
label = "standby";
break;
case REGULATOR_STATUS_BYPASS:
label = "bypass";
break;
case REGULATOR_STATUS_UNDEFINED:
label = "undefined";
break;
default:
return -ERANGE;
}
return sprintf(buf, "%s\n", label);
}
static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
static ssize_t regulator_min_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->min_uA);
}
static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
static ssize_t regulator_max_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->max_uA);
}
static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
static ssize_t regulator_min_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->min_uV);
}
static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
static ssize_t regulator_max_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
return sprintf(buf, "%d\n", rdev->constraints->max_uV);
}
static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
static ssize_t regulator_total_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
struct regulator *regulator;
int uA = 0;
mutex_lock(&rdev->mutex);
list_for_each_entry(regulator, &rdev->consumer_list, list)
uA += regulator->uA_load;
mutex_unlock(&rdev->mutex);
return sprintf(buf, "%d\n", uA);
}
static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
static ssize_t num_users_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", rdev->use_count);
}
static DEVICE_ATTR_RO(num_users);
static ssize_t type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
switch (rdev->desc->type) {
case REGULATOR_VOLTAGE:
return sprintf(buf, "voltage\n");
case REGULATOR_CURRENT:
return sprintf(buf, "current\n");
}
return sprintf(buf, "unknown\n");
}
static DEVICE_ATTR_RO(type);
static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
}
static DEVICE_ATTR(suspend_mem_microvolts, 0444,
regulator_suspend_mem_uV_show, NULL);
static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
}
static DEVICE_ATTR(suspend_disk_microvolts, 0444,
regulator_suspend_disk_uV_show, NULL);
static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
}
static DEVICE_ATTR(suspend_standby_microvolts, 0444,
regulator_suspend_standby_uV_show, NULL);
static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_opmode(buf,
rdev->constraints->state_mem.mode);
}
static DEVICE_ATTR(suspend_mem_mode, 0444,
regulator_suspend_mem_mode_show, NULL);
static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_opmode(buf,
rdev->constraints->state_disk.mode);
}
static DEVICE_ATTR(suspend_disk_mode, 0444,
regulator_suspend_disk_mode_show, NULL);
static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_opmode(buf,
rdev->constraints->state_standby.mode);
}
static DEVICE_ATTR(suspend_standby_mode, 0444,
regulator_suspend_standby_mode_show, NULL);
static ssize_t regulator_suspend_mem_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_state(buf,
rdev->constraints->state_mem.enabled);
}
static DEVICE_ATTR(suspend_mem_state, 0444,
regulator_suspend_mem_state_show, NULL);
static ssize_t regulator_suspend_disk_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_state(buf,
rdev->constraints->state_disk.enabled);
}
static DEVICE_ATTR(suspend_disk_state, 0444,
regulator_suspend_disk_state_show, NULL);
static ssize_t regulator_suspend_standby_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
return regulator_print_state(buf,
rdev->constraints->state_standby.enabled);
}
static DEVICE_ATTR(suspend_standby_state, 0444,
regulator_suspend_standby_state_show, NULL);
static ssize_t regulator_bypass_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
const char *report;
bool bypass;
int ret;
ret = rdev->desc->ops->get_bypass(rdev, &bypass);
if (ret != 0)
report = "unknown";
else if (bypass)
report = "enabled";
else
report = "disabled";
return sprintf(buf, "%s\n", report);
}
static DEVICE_ATTR(bypass, 0444,
regulator_bypass_show, NULL);
/* Calculate the new optimum regulator operating mode based on the new total
* consumer load. All locks held by caller */
static int drms_uA_update(struct regulator_dev *rdev)
{
struct regulator *sibling;
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
lockdep_assert_held_once(&rdev->mutex);
/*
* first check to see if we can set modes at all, otherwise just
* tell the consumer everything is OK.
*/
err = regulator_check_drms(rdev);
if (err < 0)
return 0;
if (!rdev->desc->ops->get_optimum_mode &&
!rdev->desc->ops->set_load)
return 0;
if (!rdev->desc->ops->set_mode &&
!rdev->desc->ops->set_load)
return -EINVAL;
/* get output voltage */
output_uV = _regulator_get_voltage(rdev);
if (output_uV <= 0) {
rdev_err(rdev, "invalid output voltage found\n");
return -EINVAL;
}
/* get input voltage */
input_uV = 0;
if (rdev->supply)
input_uV = regulator_get_voltage(rdev->supply);
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
rdev_err(rdev, "invalid input voltage found\n");
return -EINVAL;
}
/* calc total requested load */
list_for_each_entry(sibling, &rdev->consumer_list, list)
current_uA += sibling->uA_load;
current_uA += rdev->constraints->system_load;
if (rdev->desc->ops->set_load) {
/* set the optimum mode for our new total regulator load */
err = rdev->desc->ops->set_load(rdev, current_uA);
if (err < 0)
rdev_err(rdev, "failed to set load %d\n", current_uA);
} else {
/* now get the optimum mode for our new total regulator load */
mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
output_uV, current_uA);
/* check the new mode is allowed */
err = regulator_mode_constrain(rdev, &mode);
if (err < 0) {
rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
current_uA, input_uV, output_uV);
return err;
}
err = rdev->desc->ops->set_mode(rdev, mode);
if (err < 0)
rdev_err(rdev, "failed to set optimum mode %x\n", mode);
}
return err;
}
static int suspend_set_state(struct regulator_dev *rdev,
struct regulator_state *rstate)
{
int ret = 0;
/* If we have no suspend mode configration don't set anything;
* only warn if the driver implements set_suspend_voltage or
* set_suspend_mode callback.
*/
if (!rstate->enabled && !rstate->disabled) {
if (rdev->desc->ops->set_suspend_voltage ||
rdev->desc->ops->set_suspend_mode)
rdev_warn(rdev, "No configuration\n");
return 0;
}
if (rstate->enabled && rstate->disabled) {
rdev_err(rdev, "invalid configuration\n");
return -EINVAL;
}
if (rstate->enabled && rdev->desc->ops->set_suspend_enable)
ret = rdev->desc->ops->set_suspend_enable(rdev);
else if (rstate->disabled && rdev->desc->ops->set_suspend_disable)
ret = rdev->desc->ops->set_suspend_disable(rdev);
else /* OK if set_suspend_enable or set_suspend_disable is NULL */
ret = 0;
if (ret < 0) {
rdev_err(rdev, "failed to enabled/disable\n");
return ret;
}
if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
if (ret < 0) {
rdev_err(rdev, "failed to set voltage\n");
return ret;
}
}
if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
if (ret < 0) {
rdev_err(rdev, "failed to set mode\n");
return ret;
}
}
return ret;
}
/* locks held by caller */
static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
{
lockdep_assert_held_once(&rdev->mutex);
if (!rdev->constraints)
return -EINVAL;
switch (state) {
case PM_SUSPEND_STANDBY:
return suspend_set_state(rdev,
&rdev->constraints->state_standby);
case PM_SUSPEND_MEM:
return suspend_set_state(rdev,
&rdev->constraints->state_mem);
case PM_SUSPEND_MAX:
return suspend_set_state(rdev,
&rdev->constraints->state_disk);
default:
return -EINVAL;
}
}
static void print_constraints(struct regulator_dev *rdev)
{
struct regulation_constraints *constraints = rdev->constraints;
char buf[160] = "";
size_t len = sizeof(buf) - 1;
int count = 0;
int ret;
if (constraints->min_uV && constraints->max_uV) {
if (constraints->min_uV == constraints->max_uV)
count += scnprintf(buf + count, len - count, "%d mV ",
constraints->min_uV / 1000);
else
count += scnprintf(buf + count, len - count,
"%d <--> %d mV ",
constraints->min_uV / 1000,
constraints->max_uV / 1000);
}
if (!constraints->min_uV ||
constraints->min_uV != constraints->max_uV) {
ret = _regulator_get_voltage(rdev);
if (ret > 0)
count += scnprintf(buf + count, len - count,
"at %d mV ", ret / 1000);
}
if (constraints->uV_offset)
count += scnprintf(buf + count, len - count, "%dmV offset ",
constraints->uV_offset / 1000);
if (constraints->min_uA && constraints->max_uA) {
if (constraints->min_uA == constraints->max_uA)
count += scnprintf(buf + count, len - count, "%d mA ",
constraints->min_uA / 1000);
else
count += scnprintf(buf + count, len - count,
"%d <--> %d mA ",
constraints->min_uA / 1000,
constraints->max_uA / 1000);
}
if (!constraints->min_uA ||
constraints->min_uA != constraints->max_uA) {
ret = _regulator_get_current_limit(rdev);
if (ret > 0)
count += scnprintf(buf + count, len - count,
"at %d mA ", ret / 1000);
}
if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
count += scnprintf(buf + count, len - count, "fast ");
if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
count += scnprintf(buf + count, len - count, "normal ");
if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
count += scnprintf(buf + count, len - count, "idle ");
if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
count += scnprintf(buf + count, len - count, "standby");
if (!count)
scnprintf(buf, len, "no parameters");
rdev_dbg(rdev, "%s\n", buf);
if ((constraints->min_uV != constraints->max_uV) &&
!(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE))
rdev_warn(rdev,
"Voltage range but no REGULATOR_CHANGE_VOLTAGE\n");
}
static int machine_constraints_voltage(struct regulator_dev *rdev,
struct regulation_constraints *constraints)
{
const struct regulator_ops *ops = rdev->desc->ops;
int ret;
/* do we need to apply the constraint voltage */
if (rdev->constraints->apply_uV &&
rdev->constraints->min_uV == rdev->constraints->max_uV) {
int current_uV = _regulator_get_voltage(rdev);
if (current_uV < 0) {
rdev_err(rdev,
"failed to get the current voltage(%d)\n",
current_uV);
return current_uV;
}
if (current_uV < rdev->constraints->min_uV ||
current_uV > rdev->constraints->max_uV) {
ret = _regulator_do_set_voltage(
rdev, rdev->constraints->min_uV,
rdev->constraints->max_uV);
if (ret < 0) {
rdev_err(rdev,
"failed to apply %duV constraint(%d)\n",
rdev->constraints->min_uV, ret);
return ret;
}
}
}
/* constrain machine-level voltage specs to fit
* the actual range supported by this regulator.
*/
if (ops->list_voltage && rdev->desc->n_voltages) {
int count = rdev->desc->n_voltages;
int i;
int min_uV = INT_MAX;
int max_uV = INT_MIN;
int cmin = constraints->min_uV;
int cmax = constraints->max_uV;
/* it's safe to autoconfigure fixed-voltage supplies
and the constraints are used by list_voltage. */
if (count == 1 && !cmin) {
cmin = 1;
cmax = INT_MAX;
constraints->min_uV = cmin;
constraints->max_uV = cmax;
}
/* voltage constraints are optional */
if ((cmin == 0) && (cmax == 0))
return 0;
/* else require explicit machine-level constraints */
if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
rdev_err(rdev, "invalid voltage constraints\n");
return -EINVAL;
}
/* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
for (i = 0; i < count; i++) {
int value;
value = ops->list_voltage(rdev, i);
if (value <= 0)
continue;
/* maybe adjust [min_uV..max_uV] */
if (value >= cmin && value < min_uV)
min_uV = value;
if (value <= cmax && value > max_uV)
max_uV = value;
}
/* final: [min_uV..max_uV] valid iff constraints valid */
if (max_uV < min_uV) {
rdev_err(rdev,
"unsupportable voltage constraints %u-%uuV\n",
min_uV, max_uV);
return -EINVAL;
}
/* use regulator's subset of machine constraints */
if (constraints->min_uV < min_uV) {
rdev_dbg(rdev, "override min_uV, %d -> %d\n",
constraints->min_uV, min_uV);
constraints->min_uV = min_uV;
}
if (constraints->max_uV > max_uV) {
rdev_dbg(rdev, "override max_uV, %d -> %d\n",
constraints->max_uV, max_uV);
constraints->max_uV = max_uV;
}
}
return 0;
}
static int machine_constraints_current(struct regulator_dev *rdev,
struct regulation_constraints *constraints)
{
const struct regulator_ops *ops = rdev->desc->ops;
int ret;
if (!constraints->min_uA && !constraints->max_uA)
return 0;
if (constraints->min_uA > constraints->max_uA) {
rdev_err(rdev, "Invalid current constraints\n");
return -EINVAL;
}
if (!ops->set_current_limit || !ops->get_current_limit) {
rdev_warn(rdev, "Operation of current configuration missing\n");
return 0;
}
/* Set regulator current in constraints range */
ret = ops->set_current_limit(rdev, constraints->min_uA,
constraints->max_uA);
if (ret < 0) {
rdev_err(rdev, "Failed to set current constraint, %d\n", ret);
return ret;
}
return 0;
}
static int _regulator_do_enable(struct regulator_dev *rdev);
/**
* set_machine_constraints - sets regulator constraints
* @rdev: regulator source
* @constraints: constraints to apply
*
* Allows platform initialisation code to define and constrain
* regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
* Constraints *must* be set by platform code in order for some
* regulator operations to proceed i.e. set_voltage, set_current_limit,
* set_mode.
*/
static int set_machine_constraints(struct regulator_dev *rdev,
const struct regulation_constraints *constraints)
{
int ret = 0;
const struct regulator_ops *ops = rdev->desc->ops;
if (constraints)
rdev->constraints = kmemdup(constraints, sizeof(*constraints),
GFP_KERNEL);
else
rdev->constraints = kzalloc(sizeof(*constraints),
GFP_KERNEL);
if (!rdev->constraints)
return -ENOMEM;
ret = machine_constraints_voltage(rdev, rdev->constraints);
if (ret != 0)
goto out;
ret = machine_constraints_current(rdev, rdev->constraints);
if (ret != 0)
goto out;
if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
ret = ops->set_input_current_limit(rdev,
rdev->constraints->ilim_uA);
if (ret < 0) {
rdev_err(rdev, "failed to set input limit\n");
goto out;
}
}
/* do we need to setup our suspend state */
if (rdev->constraints->initial_state) {
ret = suspend_prepare(rdev, rdev->constraints->initial_state);
if (ret < 0) {
rdev_err(rdev, "failed to set suspend state\n");
goto out;
}
}
if (rdev->constraints->initial_mode) {
if (!ops->set_mode) {
rdev_err(rdev, "no set_mode operation\n");
ret = -EINVAL;
goto out;
}
ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
if (ret < 0) {
rdev_err(rdev, "failed to set initial mode: %d\n", ret);
goto out;
}
}
/* If the constraints say the regulator should be on at this point
* and we have control then make sure it is enabled.
*/
if (rdev->constraints->always_on || rdev->constraints->boot_on) {
ret = _regulator_do_enable(rdev);
if (ret < 0 && ret != -EINVAL) {
rdev_err(rdev, "failed to enable\n");
goto out;
}
}
if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
&& ops->set_ramp_delay) {
ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
if (ret < 0) {
rdev_err(rdev, "failed to set ramp_delay\n");
goto out;
}
}
if (rdev->constraints->pull_down && ops->set_pull_down) {
ret = ops->set_pull_down(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set pull down\n");
goto out;
}
}
if (rdev->constraints->soft_start && ops->set_soft_start) {
ret = ops->set_soft_start(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set soft start\n");
goto out;
}
}
if (rdev->constraints->over_current_protection
&& ops->set_over_current_protection) {
ret = ops->set_over_current_protection(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to set over current protection\n");
goto out;
}
}
print_constraints(rdev);
return 0;
out:
kfree(rdev->constraints);
rdev->constraints = NULL;
return ret;
}
/**
* set_supply - set regulator supply regulator
* @rdev: regulator name
* @supply_rdev: supply regulator name
*
* Called by platform initialisation code to set the supply regulator for this
* regulator. This ensures that a regulators supply will also be enabled by the
* core if it's child is enabled.
*/
static int set_supply(struct regulator_dev *rdev,
struct regulator_dev *supply_rdev)
{
int err;
rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));
if (!try_module_get(supply_rdev->owner))
return -ENODEV;
rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
if (rdev->supply == NULL) {
err = -ENOMEM;
return err;
}
supply_rdev->open_count++;
return 0;
}
/**
* set_consumer_device_supply - Bind a regulator to a symbolic supply
* @rdev: regulator source
* @consumer_dev_name: dev_name() string for device supply applies to
* @supply: symbolic name for supply
*
* Allows platform initialisation code to map physical regulator
* sources to symbolic names for supplies for use by devices. Devices
* should use these symbolic names to request regulators, avoiding the
* need to provide board-specific regulator names as platform data.
*/
static int set_consumer_device_supply(struct regulator_dev *rdev,
const char *consumer_dev_name,
const char *supply)
{
struct regulator_map *node;
int has_dev;
if (supply == NULL)
return -EINVAL;
if (consumer_dev_name != NULL)
has_dev = 1;
else
has_dev = 0;
list_for_each_entry(node, &regulator_map_list, list) {
if (node->dev_name && consumer_dev_name) {
if (strcmp(node->dev_name, consumer_dev_name) != 0)
continue;
} else if (node->dev_name || consumer_dev_name) {
continue;
}
if (strcmp(node->supply, supply) != 0)
continue;
pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n",
consumer_dev_name,
dev_name(&node->regulator->dev),
node->regulator->desc->name,
supply,
dev_name(&rdev->dev), rdev_get_name(rdev));
return -EBUSY;
}
node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
if (node == NULL)
return -ENOMEM;
node->regulator = rdev;
node->supply = supply;
if (has_dev) {
node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
if (node->dev_name == NULL) {
kfree(node);
return -ENOMEM;
}
}
list_add(&node->list, &regulator_map_list);
return 0;
}
static void unset_regulator_supplies(struct regulator_dev *rdev)
{
struct regulator_map *node, *n;
list_for_each_entry_safe(node, n, &regulator_map_list, list) {
if (rdev == node->regulator) {
list_del(&node->list);
kfree(node->dev_name);
kfree(node);
}
}
}
#define REG_STR_SIZE 64
static struct regulator *create_regulator(struct regulator_dev *rdev,
struct device *dev,
const char *supply_name)
{
struct regulator *regulator;
char buf[REG_STR_SIZE];
int err, size;
regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
if (regulator == NULL)
return NULL;
mutex_lock(&rdev->mutex);
regulator->rdev = rdev;
list_add(&regulator->list, &rdev->consumer_list);
if (dev) {
regulator->dev = dev;
/* Add a link to the device sysfs entry */
size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
dev->kobj.name, supply_name);
if (size >= REG_STR_SIZE)
goto overflow_err;
regulator->supply_name = kstrdup(buf, GFP_KERNEL);
if (regulator->supply_name == NULL)
goto overflow_err;
err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj,
buf);
if (err) {
rdev_dbg(rdev, "could not add device link %s err %d\n",
dev->kobj.name, err);
/* non-fatal */
}
} else {
regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
if (regulator->supply_name == NULL)
goto overflow_err;
}
regulator->debugfs = debugfs_create_dir(regulator->supply_name,
rdev->debugfs);
if (!regulator->debugfs) {
rdev_dbg(rdev, "Failed to create debugfs directory\n");
} else {
debugfs_create_u32("uA_load", 0444, regulator->debugfs,
&regulator->uA_load);
debugfs_create_u32("min_uV", 0444, regulator->debugfs,
&regulator->min_uV);
debugfs_create_u32("max_uV", 0444, regulator->debugfs,
&regulator->max_uV);
}
/*
* Check now if the regulator is an always on regulator - if
* it is then we don't need to do nearly so much work for
* enable/disable calls.
*/
if (!_regulator_can_change_status(rdev) &&
_regulator_is_enabled(rdev))
regulator->always_on = true;
mutex_unlock(&rdev->mutex);
return regulator;
overflow_err:
list_del(&regulator->list);
kfree(regulator);
mutex_unlock(&rdev->mutex);
return NULL;
}
static int _regulator_get_enable_time(struct regulator_dev *rdev)
{
if (rdev->constraints && rdev->constraints->enable_time)
return rdev->constraints->enable_time;
if (!rdev->desc->ops->enable_time)
return rdev->desc->enable_time;
return rdev->desc->ops->enable_time(rdev);
}
static struct regulator_supply_alias *regulator_find_supply_alias(
struct device *dev, const char *supply)
{
struct regulator_supply_alias *map;
list_for_each_entry(map, &regulator_supply_alias_list, list)
if (map->src_dev == dev && strcmp(map->src_supply, supply) == 0)
return map;
return NULL;
}
static void regulator_supply_alias(struct device **dev, const char **supply)
{
struct regulator_supply_alias *map;
map = regulator_find_supply_alias(*dev, *supply);
if (map) {
dev_dbg(*dev, "Mapping supply %s to %s,%s\n",
*supply, map->alias_supply,
dev_name(map->alias_dev));
*dev = map->alias_dev;
*supply = map->alias_supply;
}
}
static int of_node_match(struct device *dev, const void *data)
{
return dev->of_node == data;
}
static struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
{
struct device *dev;
dev = class_find_device(&regulator_class, NULL, np, of_node_match);
return dev ? dev_to_rdev(dev) : NULL;
}
static int regulator_match(struct device *dev, const void *data)
{
struct regulator_dev *r = dev_to_rdev(dev);
return strcmp(rdev_get_name(r), data) == 0;
}
static struct regulator_dev *regulator_lookup_by_name(const char *name)
{
struct device *dev;
dev = class_find_device(&regulator_class, NULL, name, regulator_match);
return dev ? dev_to_rdev(dev) : NULL;
}
/**
* regulator_dev_lookup - lookup a regulator device.
* @dev: device for regulator "consumer".
* @supply: Supply name or regulator ID.
* @ret: 0 on success, -ENODEV if lookup fails permanently, -EPROBE_DEFER if
* lookup could succeed in the future.
*
* If successful, returns a struct regulator_dev that corresponds to the name
* @supply and with the embedded struct device refcount incremented by one,
* or NULL on failure. The refcount must be dropped by calling put_device().
*/
static struct regulator_dev *regulator_dev_lookup(struct device *dev,
const char *supply,
int *ret)
{
struct regulator_dev *r;
struct device_node *node;
struct regulator_map *map;
const char *devname = NULL;
regulator_supply_alias(&dev, &supply);
/* first do a dt based lookup */
if (dev && dev->of_node) {
node = of_get_regulator(dev, supply);
if (node) {
r = of_find_regulator_by_node(node);
if (r)
return r;
*ret = -EPROBE_DEFER;
return NULL;
} else {
/*
* If we couldn't even get the node then it's
* not just that the device didn't register
* yet, there's no node and we'll never
* succeed.
*/
*ret = -ENODEV;
}
}
/* if not found, try doing it non-dt way */
if (dev)
devname = dev_name(dev);
r = regulator_lookup_by_name(supply);
if (r)
return r;
mutex_lock(&regulator_list_mutex);
list_for_each_entry(map, &regulator_map_list, list) {
/* If the mapping has a device set up it must match */
if (map->dev_name &&
(!devname || strcmp(map->dev_name, devname)))
continue;
if (strcmp(map->supply, supply) == 0 &&
get_device(&map->regulator->dev)) {
mutex_unlock(&regulator_list_mutex);
return map->regulator;
}
}
mutex_unlock(&regulator_list_mutex);
return NULL;
}
static int regulator_resolve_supply(struct regulator_dev *rdev)
{
struct regulator_dev *r;
struct device *dev = rdev->dev.parent;
int ret;
/* No supply to resovle? */
if (!rdev->supply_name)
return 0;
/* Supply already resolved? */
if (rdev->supply)
return 0;
r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
if (!r) {
if (ret == -ENODEV) {
/*
* No supply was specified for this regulator and
* there will never be one.
*/
return 0;
}
/* Did the lookup explicitly defer for us? */
if (ret == -EPROBE_DEFER)
return ret;
if (have_full_constraints()) {
r = dummy_regulator_rdev;
get_device(&r->dev);
} else {
dev_err(dev, "Failed to resolve %s-supply for %s\n",
rdev->supply_name, rdev->desc->name);
return -EPROBE_DEFER;
}
}
/* Recursively resolve the supply of the supply */
ret = regulator_resolve_supply(r);
if (ret < 0) {
put_device(&r->dev);
return ret;
}
ret = set_supply(rdev, r);
if (ret < 0) {
put_device(&r->dev);
return ret;
}
/* Cascade always-on state to supply */
if (_regulator_is_enabled(rdev) && rdev->supply) {
ret = regulator_enable(rdev->supply);
if (ret < 0) {
_regulator_put(rdev->supply);
return ret;
}
}
return 0;
}
/* Internal regulator request function */
static struct regulator *_regulator_get(struct device *dev, const char *id,
bool exclusive, bool allow_dummy)
{
struct regulator_dev *rdev;
struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
const char *devname = NULL;
int ret;
if (id == NULL) {
pr_err("get() with no identifier\n");
return ERR_PTR(-EINVAL);
}
if (dev)
devname = dev_name(dev);
if (have_full_constraints())
ret = -ENODEV;
else
ret = -EPROBE_DEFER;
rdev = regulator_dev_lookup(dev, id, &ret);
if (rdev)
goto found;
regulator = ERR_PTR(ret);
/*
* If we have return value from dev_lookup fail, we do not expect to
* succeed, so, quit with appropriate error value
*/
if (ret && ret != -ENODEV)
return regulator;
if (!devname)
devname = "deviceless";
/*
* Assume that a regulator is physically present and enabled
* even if it isn't hooked up and just provide a dummy.
*/
if (have_full_constraints() && allow_dummy) {
pr_warn("%s supply %s not found, using dummy regulator\n",
devname, id);
rdev = dummy_regulator_rdev;
get_device(&rdev->dev);
goto found;
/* Don't log an error when called from regulator_get_optional() */
} else if (!have_full_constraints() || exclusive) {
dev_warn(dev, "dummy supplies not allowed\n");
}
return regulator;
found:
if (rdev->exclusive) {
regulator = ERR_PTR(-EPERM);
put_device(&rdev->dev);
return regulator;
}
if (exclusive && rdev->open_count) {
regulator = ERR_PTR(-EBUSY);
put_device(&rdev->dev);
return regulator;
}
ret = regulator_resolve_supply(rdev);
if (ret < 0) {
regulator = ERR_PTR(ret);
put_device(&rdev->dev);
return regulator;
}
if (!try_module_get(rdev->owner)) {
put_device(&rdev->dev);
return regulator;
}
regulator = create_regulator(rdev, dev, id);
if (regulator == NULL) {
regulator = ERR_PTR(-ENOMEM);
put_device(&rdev->dev);
module_put(rdev->owner);
return regulator;
}
rdev->open_count++;
if (exclusive) {
rdev->exclusive = 1;
ret = _regulator_is_enabled(rdev);
if (ret > 0)
rdev->use_count = 1;
else
rdev->use_count = 0;
}
return regulator;
}
/**
* regulator_get - lookup and obtain a reference to a regulator.
* @dev: device for regulator "consumer"
* @id: Supply name or regulator ID.
*
* Returns a struct regulator corresponding to the regulator producer,
* or IS_ERR() condition containing errno.
*
* Use of supply names configured via regulator_set_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
*/
struct regulator *regulator_get(struct device *dev, const char *id)
{
return _regulator_get(dev, id, false, true);
}
EXPORT_SYMBOL_GPL(regulator_get);
/**
* regulator_get_exclusive - obtain exclusive access to a regulator.
* @dev: device for regulator "consumer"
* @id: Supply name or regulator ID.
*
* Returns a struct regulator corresponding to the regulator producer,
* or IS_ERR() condition containing errno. Other consumers will be
* unable to obtain this regulator while this reference is held and the
* use count for the regulator will be initialised to reflect the current
* state of the regulator.
*
* This is intended for use by consumers which cannot tolerate shared
* use of the regulator such as those which need to force the
* regulator off for correct operation of the hardware they are
* controlling.
*
* Use of supply names configured via regulator_set_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
*/
struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
{
return _regulator_get(dev, id, true, false);
}
EXPORT_SYMBOL_GPL(regulator_get_exclusive);
/**
* regulator_get_optional - obtain optional access to a regulator.
* @dev: device for regulator "consumer"
* @id: Supply name or regulator ID.
*
* Returns a struct regulator corresponding to the regulator producer,
* or IS_ERR() condition containing errno.
*
* This is intended for use by consumers for devices which can have
* some supplies unconnected in normal use, such as some MMC devices.
* It can allow the regulator core to provide stub supplies for other
* supplies requested using normal regulator_get() calls without
* disrupting the operation of drivers that can handle absent
* supplies.
*
* Use of supply names configured via regulator_set_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
*/
struct regulator *regulator_get_optional(struct device *dev, const char *id)
{
return _regulator_get(dev, id, false, false);
}
EXPORT_SYMBOL_GPL(regulator_get_optional);
/* regulator_list_mutex lock held by regulator_put() */
static void _regulator_put(struct regulator *regulator)
{
struct regulator_dev *rdev;
if (IS_ERR_OR_NULL(regulator))
return;
lockdep_assert_held_once(&regulator_list_mutex);
rdev = regulator->rdev;
debugfs_remove_recursive(regulator->debugfs);
/* remove any sysfs entries */
if (regulator->dev)
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
mutex_lock(&rdev->mutex);
list_del(&regulator->list);
rdev->open_count--;
rdev->exclusive = 0;
put_device(&rdev->dev);
mutex_unlock(&rdev->mutex);
kfree(regulator->supply_name);
kfree(regulator);
module_put(rdev->owner);
}
/**
* regulator_put - "free" the regulator source
* @regulator: regulator source
*
* Note: drivers must ensure that all regulator_enable calls made on this
* regulator source are balanced by regulator_disable calls prior to calling
* this function.
*/
void regulator_put(struct regulator *regulator)
{
mutex_lock(&regulator_list_mutex);
_regulator_put(regulator);
mutex_unlock(&regulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_put);
/**
* regulator_register_supply_alias - Provide device alias for supply lookup
*
* @dev: device that will be given as the regulator "consumer"
* @id: Supply name or regulator ID
* @alias_dev: device that should be used to lookup the supply
* @alias_id: Supply name or regulator ID that should be used to lookup the
* supply
*
* All lookups for id on dev will instead be conducted for alias_id on
* alias_dev.
*/
int regulator_register_supply_alias(struct device *dev, const char *id,
struct device *alias_dev,
const char *alias_id)
{
struct regulator_supply_alias *map;
map = regulator_find_supply_alias(dev, id);
if (map)
return -EEXIST;
map = kzalloc(sizeof(struct regulator_supply_alias), GFP_KERNEL);
if (!map)
return -ENOMEM;
map->src_dev = dev;
map->src_supply = id;
map->alias_dev = alias_dev;
map->alias_supply = alias_id;
list_add(&map->list, &regulator_supply_alias_list);
pr_info("Adding alias for supply %s,%s -> %s,%s\n",
id, dev_name(dev), alias_id, dev_name(alias_dev));
return 0;
}
EXPORT_SYMBOL_GPL(regulator_register_supply_alias);
/**
* regulator_unregister_supply_alias - Remove device alias
*
* @dev: device that will be given as the regulator "consumer"
* @id: Supply name or regulator ID
*
* Remove a lookup alias if one exists for id on dev.
*/
void regulator_unregister_supply_alias(struct device *dev, const char *id)
{
struct regulator_supply_alias *map;
map = regulator_find_supply_alias(dev, id);
if (map) {
list_del(&map->list);
kfree(map);
}
}
EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias);
/**
* regulator_bulk_register_supply_alias - register multiple aliases
*
* @dev: device that will be given as the regulator "consumer"
* @id: List of supply names or regulator IDs
* @alias_dev: device that should be used to lookup the supply
* @alias_id: List of supply names or regulator IDs that should be used to
* lookup the supply
* @num_id: Number of aliases to register
*
* @return 0 on success, an errno on failure.
*
* This helper function allows drivers to register several supply
* aliases in one operation. If any of the aliases cannot be
* registered any aliases that were registered will be removed
* before returning to the caller.
*/
int regulator_bulk_register_supply_alias(struct device *dev,
const char *const *id,
struct device *alias_dev,
const char *const *alias_id,
int num_id)
{
int i;
int ret;
for (i = 0; i < num_id; ++i) {
ret = regulator_register_supply_alias(dev, id[i], alias_dev,
alias_id[i]);
if (ret < 0)
goto err;
}
return 0;
err:
dev_err(dev,
"Failed to create supply alias %s,%s -> %s,%s\n",
id[i], dev_name(dev), alias_id[i], dev_name(alias_dev));
while (--i >= 0)
regulator_unregister_supply_alias(dev, id[i]);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias);
/**
* regulator_bulk_unregister_supply_alias - unregister multiple aliases
*
* @dev: device that will be given as the regulator "consumer"
* @id: List of supply names or regulator IDs
* @num_id: Number of aliases to unregister
*
* This helper function allows drivers to unregister several supply
* aliases in one operation.
*/
void regulator_bulk_unregister_supply_alias(struct device *dev,
const char *const *id,
int num_id)
{
int i;
for (i = 0; i < num_id; ++i)
regulator_unregister_supply_alias(dev, id[i]);
}
EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);
/* Manage enable GPIO list. Same GPIO pin can be shared among regulators */
static int regulator_ena_gpio_request(struct regulator_dev *rdev,
const struct regulator_config *config)
{
struct regulator_enable_gpio *pin;
struct gpio_desc *gpiod;
int ret;
gpiod = gpio_to_desc(config->ena_gpio);
list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
if (pin->gpiod == gpiod) {
rdev_dbg(rdev, "GPIO %d is already used\n",
config->ena_gpio);
goto update_ena_gpio_to_rdev;
}
}
ret = gpio_request_one(config->ena_gpio,
GPIOF_DIR_OUT | config->ena_gpio_flags,
rdev_get_name(rdev));
if (ret)
return ret;
pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
if (pin == NULL) {
gpio_free(config->ena_gpio);
return -ENOMEM;
}
pin->gpiod = gpiod;
pin->ena_gpio_invert = config->ena_gpio_invert;
list_add(&pin->list, &regulator_ena_gpio_list);
update_ena_gpio_to_rdev:
pin->request_count++;
rdev->ena_pin = pin;
return 0;
}
static void regulator_ena_gpio_free(struct regulator_dev *rdev)
{
struct regulator_enable_gpio *pin, *n;
if (!rdev->ena_pin)
return;
/* Free the GPIO only in case of no use */
list_for_each_entry_safe(pin, n, &regulator_ena_gpio_list, list) {
if (pin->gpiod == rdev->ena_pin->gpiod) {
if (pin->request_count <= 1) {
pin->request_count = 0;
gpiod_put(pin->gpiod);
list_del(&pin->list);
kfree(pin);
rdev->ena_pin = NULL;
return;
} else {
pin->request_count--;
}
}
}
}
/**
* regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control
* @rdev: regulator_dev structure
* @enable: enable GPIO at initial use?
*
* GPIO is enabled in case of initial use. (enable_count is 0)
* GPIO is disabled when it is not shared any more. (enable_count <= 1)
*/
static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
{
struct regulator_enable_gpio *pin = rdev->ena_pin;
if (!pin)
return -EINVAL;
if (enable) {
/* Enable GPIO at initial use */
if (pin->enable_count == 0)
gpiod_set_value_cansleep(pin->gpiod,
!pin->ena_gpio_invert);
pin->enable_count++;
} else {
if (pin->enable_count > 1) {
pin->enable_count--;
return 0;
}
/* Disable GPIO if not used */
if (pin->enable_count <= 1) {
gpiod_set_value_cansleep(pin->gpiod,
pin->ena_gpio_invert);
pin->enable_count = 0;
}
}
return 0;
}
/**
* _regulator_enable_delay - a delay helper function
* @delay: time to delay in microseconds
*
* Delay for the requested amount of time as per the guidelines in:
*
* Documentation/timers/timers-howto.txt
*
* The assumption here is that regulators will never be enabled in
* atomic context and therefore sleeping functions can be used.
*/
static void _regulator_enable_delay(unsigned int delay)
{
unsigned int ms = delay / 1000;
unsigned int us = delay % 1000;
if (ms > 0) {
/*
* For small enough values, handle super-millisecond
* delays in the usleep_range() call below.
*/
if (ms < 20)
us += ms * 1000;
else
msleep(ms);
}
/*
* Give the scheduler some room to coalesce with any other
* wakeup sources. For delays shorter than 10 us, don't even
* bother setting up high-resolution timers and just busy-
* loop.
*/
if (us >= 10)
usleep_range(us, us + 100);
else
udelay(us);
}
static int _regulator_do_enable(struct regulator_dev *rdev)
{
int ret, delay;
/* Query before enabling in case configuration dependent. */
ret = _regulator_get_enable_time(rdev);
if (ret >= 0) {
delay = ret;
} else {
rdev_warn(rdev, "enable_time() failed: %d\n", ret);
delay = 0;
}
trace_regulator_enable(rdev_get_name(rdev));
if (rdev->desc->off_on_delay) {
/* if needed, keep a distance of off_on_delay from last time
* this regulator was disabled.
*/
unsigned long start_jiffy = jiffies;
unsigned long intended, max_delay, remaining;
max_delay = usecs_to_jiffies(rdev->desc->off_on_delay);
intended = rdev->last_off_jiffy + max_delay;
if (time_before(start_jiffy, intended)) {
/* calc remaining jiffies to deal with one-time
* timer wrapping.
* in case of multiple timer wrapping, either it can be
* detected by out-of-range remaining, or it cannot be
* detected and we gets a panelty of
* _regulator_enable_delay().
*/
remaining = intended - start_jiffy;
if (remaining <= max_delay)
_regulator_enable_delay(
jiffies_to_usecs(remaining));
}
}
if (rdev->ena_pin) {
if (!rdev->ena_gpio_state) {
ret = regulator_ena_gpio_ctrl(rdev, true);
if (ret < 0)
return ret;
rdev->ena_gpio_state = 1;
}
} else if (rdev->desc->ops->enable) {
ret = rdev->desc->ops->enable(rdev);
if (ret < 0)
return ret;
} else {
return -EINVAL;
}
/* Allow the regulator to ramp; it would be useful to extend
* this for bulk operations so that the regulators can ramp
* together. */
trace_regulator_enable_delay(rdev_get_name(rdev));
_regulator_enable_delay(delay);
trace_regulator_enable_complete(rdev_get_name(rdev));
return 0;
}
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
int ret;
lockdep_assert_held_once(&rdev->mutex);
/* check voltage and requested load before enabling */
if (rdev->constraints &&
(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
drms_uA_update(rdev);
if (rdev->use_count == 0) {
/* The regulator may on if it's not switchable or left on */
ret = _regulator_is_enabled(rdev);
if (ret == -EINVAL || ret == 0) {
if (!_regulator_can_change_status(rdev))
return -EPERM;
ret = _regulator_do_enable(rdev);
if (ret < 0)
return ret;
} else if (ret < 0) {
rdev_err(rdev, "is_enabled() failed: %d\n", ret);
return ret;
}
/* Fallthrough on positive return values - already enabled */
}
rdev->use_count++;
return 0;
}
/**
* regulator_enable - enable regulator output
* @regulator: regulator source
*
* Request that the regulator be enabled with the regulator output at
* the predefined voltage or current value. Calls to regulator_enable()
* must be balanced with calls to regulator_disable().
*
* NOTE: the output value can be set by other drivers, boot loader or may be
* hardwired in the regulator.
*/
int regulator_enable(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
int ret = 0;
if (regulator->always_on)
return 0;
if (rdev->supply) {
ret = regulator_enable(rdev->supply);
if (ret != 0)
return ret;
}
mutex_lock(&rdev->mutex);
ret = _regulator_enable(rdev);
mutex_unlock(&rdev->mutex);
if (ret != 0 && rdev->supply)
regulator_disable(rdev->supply);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_enable);
static int _regulator_do_disable(struct regulator_dev *rdev)
{
int ret;
trace_regulator_disable(rdev_get_name(rdev));
if (rdev->ena_pin) {
if (rdev->ena_gpio_state) {
ret = regulator_ena_gpio_ctrl(rdev, false);
if (ret < 0)
return ret;
rdev->ena_gpio_state = 0;
}
} else if (rdev->desc->ops->disable) {
ret = rdev->desc->ops->disable(rdev);
if (ret != 0)
return ret;
}
/* cares about last_off_jiffy only if off_on_delay is required by
* device.
*/
if (rdev->desc->off_on_delay)
rdev->last_off_jiffy = jiffies;
trace_regulator_disable_complete(rdev_get_name(rdev));
return 0;
}
/* locks held by regulator_disable() */
static int _regulator_disable(struct regulator_dev *rdev)
{
int ret = 0;
lockdep_assert_held_once(&rdev->mutex);
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n", rdev_get_name(rdev)))
return -EIO;
/* are we the last user and permitted to disable ? */
if (rdev->use_count == 1 &&
(rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
if (_regulator_can_change_status(rdev)) {
ret = _notifier_call_chain(rdev,
REGULATOR_EVENT_PRE_DISABLE,
NULL);
if (ret & NOTIFY_STOP_MASK)
return -EINVAL;
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
_notifier_call_chain(rdev,
REGULATOR_EVENT_ABORT_DISABLE,
NULL);
return ret;
}
_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
NULL);
}
rdev->use_count = 0;
} else if (rdev->use_count > 1) {
if (rdev->constraints &&
(rdev->constraints->valid_ops_mask &
REGULATOR_CHANGE_DRMS))
drms_uA_update(rdev);
rdev->use_count--;
}
return ret;
}
/**
* regulator_disable - disable regulator output
* @regulator: regulator source
*
* Disable the regulator output voltage or current. Calls to
* regulator_enable() must be balanced with calls to
* regulator_disable().
*
* NOTE: this will only disable the regulator output if no other consumer
* devices have it enabled, the regulator device supports disabling and
* machine constraints permit this operation.
*/
int regulator_disable(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
int ret = 0;
if (regulator->always_on)
return 0;
mutex_lock(&rdev->mutex);
ret = _regulator_disable(rdev);
mutex_unlock(&rdev->mutex);
if (ret == 0 && rdev->supply)
regulator_disable(rdev->supply);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_disable);
/* locks held by regulator_force_disable() */
static int _regulator_force_disable(struct regulator_dev *rdev)
{
int ret = 0;
lockdep_assert_held_once(&rdev->mutex);
ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
REGULATOR_EVENT_PRE_DISABLE, NULL);
if (ret & NOTIFY_STOP_MASK)
return -EINVAL;
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to force disable\n");
_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
REGULATOR_EVENT_ABORT_DISABLE, NULL);
return ret;
}
_notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
REGULATOR_EVENT_DISABLE, NULL);
return 0;
}
/**
* regulator_force_disable - force disable regulator output
* @regulator: regulator source
*
* Forcibly disable the regulator output voltage or current.
* NOTE: this *will* disable the regulator output even if other consumer
* devices have it enabled. This should be used for situations when device
* damage will likely occur if the regulator is not disabled (e.g. over temp).
*/
int regulator_force_disable(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
int ret;
mutex_lock(&rdev->mutex);
regulator->uA_load = 0;
ret = _regulator_force_disable(regulator->rdev);
mutex_unlock(&rdev->mutex);
if (rdev->supply)
while (rdev->open_count--)
regulator_disable(rdev->supply);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_force_disable);
static void regulator_disable_work(struct work_struct *work)
{
struct regulator_dev *rdev = container_of(work, struct regulator_dev,
disable_work.work);
int count, i, ret;
mutex_lock(&rdev->mutex);
BUG_ON(!rdev->deferred_disables);
count = rdev->deferred_disables;
rdev->deferred_disables = 0;
for (i = 0; i < count; i++) {
ret = _regulator_disable(rdev);
if (ret != 0)
rdev_err(rdev, "Deferred disable failed: %d\n", ret);
}
mutex_unlock(&rdev->mutex);
if (rdev->supply) {
for (i = 0; i < count; i++) {
ret = regulator_disable(rdev->supply);
if (ret != 0) {
rdev_err(rdev,
"Supply disable failed: %d\n", ret);
}
}
}
}
/**
* regulator_disable_deferred - disable regulator output with delay
* @regulator: regulator source
* @ms: miliseconds until the regulator is disabled
*
* Execute regulator_disable() on the regulator after a delay. This
* is intended for use with devices that require some time to quiesce.
*
* NOTE: this will only disable the regulator output if no other consumer
* devices have it enabled, the regulator device supports disabling and
* machine constraints permit this operation.
*/
int regulator_disable_deferred(struct regulator *regulator, int ms)
{
struct regulator_dev *rdev = regulator->rdev;
if (regulator->always_on)
return 0;
if (!ms)
return regulator_disable(regulator);
mutex_lock(&rdev->mutex);
rdev->deferred_disables++;
mutex_unlock(&rdev->mutex);
queue_delayed_work(system_power_efficient_wq, &rdev->disable_work,
msecs_to_jiffies(ms));
return 0;
}
EXPORT_SYMBOL_GPL(regulator_disable_deferred);
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
/* A GPIO control always takes precedence */
if (rdev->ena_pin)
return rdev->ena_gpio_state;
/* If we don't know then assume that the regulator is always on */
if (!rdev->desc->ops->is_enabled)
return 1;
return rdev->desc->ops->is_enabled(rdev);
}
static int _regulator_list_voltage(struct regulator *regulator,
unsigned selector, int lock)
{
struct regulator_dev *rdev = regulator->rdev;
const struct regulator_ops *ops = rdev->desc->ops;
int ret;
if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
return rdev->desc->fixed_uV;
if (ops->list_voltage) {
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
if (lock)
mutex_lock(&rdev->mutex);
ret = ops->list_voltage(rdev, selector);
if (lock)
mutex_unlock(&rdev->mutex);
} else if (rdev->supply) {
ret = _regulator_list_voltage(rdev->supply, selector, lock);
} else {
return -EINVAL;
}
if (ret > 0) {
if (ret < rdev->constraints->min_uV)
ret = 0;
else if (ret > rdev->constraints->max_uV)
ret = 0;
}
return ret;
}
/**
* regulator_is_enabled - is the regulator output enabled
* @regulator: regulator source
*
* Returns positive if the regulator driver backing the source/client
* has requested that the device be enabled, zero if it hasn't, else a
* negative errno code.
*
* Note that the device backing this regulator handle can have multiple
* users, so it might be enabled even if regulator_enable() was never
* called for this particular source.
*/
int regulator_is_enabled(struct regulator *regulator)
{
int ret;
if (regulator->always_on)
return 1;
mutex_lock(&regulator->rdev->mutex);
ret = _regulator_is_enabled(regulator->rdev);
mutex_unlock(&regulator->rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_is_enabled);
/**
* regulator_can_change_voltage - check if regulator can change voltage
* @regulator: regulator source
*
* Returns positive if the regulator driver backing the source/client
* can change its voltage, false otherwise. Useful for detecting fixed
* or dummy regulators and disabling voltage change logic in the client
* driver.
*/
int regulator_can_change_voltage(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
if (rdev->constraints &&
(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
return 1;
if (rdev->desc->continuous_voltage_range &&
rdev->constraints->min_uV && rdev->constraints->max_uV &&
rdev->constraints->min_uV != rdev->constraints->max_uV)
return 1;
}
return 0;
}
EXPORT_SYMBOL_GPL(regulator_can_change_voltage);
/**
* regulator_count_voltages - count regulator_list_voltage() selectors
* @regulator: regulator source
*
* Returns number of selectors, or negative errno. Selectors are
* numbered starting at zero, and typically correspond to bitfields
* in hardware registers.
*/
int regulator_count_voltages(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
if (rdev->desc->n_voltages)
return rdev->desc->n_voltages;
if (!rdev->supply)
return -EINVAL;
return regulator_count_voltages(rdev->supply);
}
EXPORT_SYMBOL_GPL(regulator_count_voltages);
/**
* regulator_list_voltage - enumerate supported voltages
* @regulator: regulator source
* @selector: identify voltage to list
* Context: can sleep
*
* Returns a voltage that can be passed to @regulator_set_voltage(),
* zero if this selector code can't be used on this system, or a
* negative errno.
*/
int regulator_list_voltage(struct regulator *regulator, unsigned selector)
{
return _regulator_list_voltage(regulator, selector, 1);
}
EXPORT_SYMBOL_GPL(regulator_list_voltage);
/**
* regulator_get_regmap - get the regulator's register map
* @regulator: regulator source
*
* Returns the register map for the given regulator, or an ERR_PTR value
* if the regulator doesn't use regmap.
*/
struct regmap *regulator_get_regmap(struct regulator *regulator)
{
struct regmap *map = regulator->rdev->regmap;
return map ? map : ERR_PTR(-EOPNOTSUPP);
}
/**
* regulator_get_hardware_vsel_register - get the HW voltage selector register
* @regulator: regulator source
* @vsel_reg: voltage selector register, output parameter
* @vsel_mask: mask for voltage selector bitfield, output parameter
*
* Returns the hardware register offset and bitmask used for setting the
* regulator voltage. This might be useful when configuring voltage-scaling
* hardware or firmware that can make I2C requests behind the kernel's back,
* for example.
*
* On success, the output parameters @vsel_reg and @vsel_mask are filled in
* and 0 is returned, otherwise a negative errno is returned.
*/
int regulator_get_hardware_vsel_register(struct regulator *regulator,
unsigned *vsel_reg,
unsigned *vsel_mask)
{
struct regulator_dev *rdev = regulator->rdev;
const struct regulator_ops *ops = rdev->desc->ops;
if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
return -EOPNOTSUPP;
*vsel_reg = rdev->desc->vsel_reg;
*vsel_mask = rdev->desc->vsel_mask;
return 0;
}
EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register);
/**
* regulator_list_hardware_vsel - get the HW-specific register value for a selector
* @regulator: regulator source
* @selector: identify voltage to list
*
* Converts the selector to a hardware-specific voltage selector that can be
* directly written to the regulator registers. The address of the voltage
* register can be determined by calling @regulator_get_hardware_vsel_register.
*
* On error a negative errno is returned.
*/
int regulator_list_hardware_vsel(struct regulator *regulator,
unsigned selector)
{
struct regulator_dev *rdev = regulator->rdev;
const struct regulator_ops *ops = rdev->desc->ops;
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
return -EOPNOTSUPP;
return selector;
}
EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel);
/**
* regulator_get_linear_step - return the voltage step size between VSEL values
* @regulator: regulator source
*
* Returns the voltage step size between VSEL values for linear
* regulators, or return 0 if the regulator isn't a linear regulator.
*/
unsigned int regulator_get_linear_step(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;
return rdev->desc->uV_step;
}
EXPORT_SYMBOL_GPL(regulator_get_linear_step);
/**
* regulator_is_supported_voltage - check if a voltage range can be supported
*
* @regulator: Regulator to check.
* @min_uV: Minimum required voltage in uV.
* @max_uV: Maximum required voltage in uV.
*
* Returns a boolean or a negative error code.
*/
int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV)
{
struct regulator_dev *rdev = regulator->rdev;
int i, voltages, ret;
/* If we can't change voltage check the current voltage */
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
return min_uV <= ret && ret <= max_uV;
else
return ret;
}
/* Any voltage within constrains range is fine? */
if (rdev->desc->continuous_voltage_range)
return min_uV >= rdev->constraints->min_uV &&
max_uV <= rdev->constraints->max_uV;
ret = regulator_count_voltages(regulator);
if (ret < 0)
return ret;
voltages = ret;
for (i = 0; i < voltages; i++) {
ret = regulator_list_voltage(regulator, i);
if (ret >= min_uV && ret <= max_uV)
return 1;
}
return 0;
}
EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
int max_uV)
{
const struct regulator_desc *desc = rdev->desc;
if (desc->ops->map_voltage)
return desc->ops->map_voltage(rdev, min_uV, max_uV);
if (desc->ops->list_voltage == regulator_list_voltage_linear)
return regulator_map_voltage_linear(rdev, min_uV, max_uV);
if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);
return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
}
static int _regulator_call_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned *selector)
{
struct pre_voltage_change_data data;
int ret;
data.old_uV = _regulator_get_voltage(rdev);
data.min_uV = min_uV;
data.max_uV = max_uV;
ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
&data);
if (ret & NOTIFY_STOP_MASK)
return -EINVAL;
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, selector);
if (ret >= 0)
return ret;
_notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
(void *)data.old_uV);
return ret;
}
static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
int uV, unsigned selector)
{
struct pre_voltage_change_data data;
int ret;
data.old_uV = _regulator_get_voltage(rdev);
data.min_uV = uV;
data.max_uV = uV;
ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
&data);
if (ret & NOTIFY_STOP_MASK)
return -EINVAL;
ret = rdev->desc->ops->set_voltage_sel(rdev, selector);
if (ret >= 0)
return ret;
_notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
(void *)data.old_uV);
return ret;
}
static int _regulator_do_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
int ret;
int delay = 0;
int best_val = 0;
unsigned int selector;
int old_selector = -1;
trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
min_uV += rdev->constraints->uV_offset;
max_uV += rdev->constraints->uV_offset;
/*
* If we can't obtain the old selector there is not enough
* info to call set_voltage_time_sel().
*/
if (_regulator_is_enabled(rdev) &&
rdev->desc->ops->set_voltage_time_sel &&
rdev->desc->ops->get_voltage_sel) {
old_selector = rdev->desc->ops->get_voltage_sel(rdev);
if (old_selector < 0)
return old_selector;
}
if (rdev->desc->ops->set_voltage) {
ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
&selector);
if (ret >= 0) {
if (rdev->desc->ops->list_voltage)
best_val = rdev->desc->ops->list_voltage(rdev,
selector);
else
best_val = _regulator_get_voltage(rdev);
}
} else if (rdev->desc->ops->set_voltage_sel) {
ret = regulator_map_voltage(rdev, min_uV, max_uV);
if (ret >= 0) {
best_val = rdev->desc->ops->list_voltage(rdev, ret);
if (min_uV <= best_val && max_uV >= best_val) {
selector = ret;
if (old_selector == selector)
ret = 0;
else
ret = _regulator_call_set_voltage_sel(
rdev, best_val, selector);
} else {
ret = -EINVAL;
}
}
} else {
ret = -EINVAL;
}
/* Call set_voltage_time_sel if successfully obtained old_selector */
if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0
&& old_selector != selector) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,
old_selector, selector);
if (delay < 0) {
rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
delay);
delay = 0;
}
/* Insert any necessary delays */
if (delay >= 1000) {
mdelay(delay / 1000);
udelay(delay % 1000);
} else if (delay) {
udelay(delay);
}
}
if (ret == 0 && best_val >= 0) {
unsigned