blob: 0bc8b0b2e103421cc7062e01d642b91cd0dc3abd [file] [log] [blame]
The following is a list of files and features that are going to be
removed in the kernel source tree. Every entry should contain what
exactly is going away, why it is happening, and who is going to be doing
the work. When the feature is removed from the kernel, it should also
be removed from this file.
What: /sys/devices/.../power/state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
driver-internal runtime power management with: mechanisms to support
system-wide sleep state transitions; event codes that distinguish
different phases of swsusp "sleep" transitions; and userspace policy
inputs. This framework was never widely used, and most attempts to
use it were broken. Drivers should instead be exposing domain-specific
interfaces either to kernel or to userspace.
Who: Pavel Machek <>
When: December 2005
Why: declared obsolete since kernel 2.6.3
O_DIRECT can be used instead
Who: Adrian Bunk <>
What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
When: June 2007
Why: Deprecated in favour of the more efficient and robust rawiso interface.
Affected are applications which use the deprecated part of libraw1394
(raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv,
raw1394_stop_iso_rcv) or bypass libraw1394.
Who: Dan Dennedy <>, Stefan Richter <>
What: dv1394 driver (CONFIG_IEEE1394_DV1394)
When: June 2007
Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
shift of application support has been indicated on
and developers' mailinglists for quite some time. Major applications
have been converted, with the exception of ffmpeg and hence xine.
Piped output of dvgrab2 is a partial equivalent to dv1394.
Who: Dan Dennedy <>, Stefan Richter <>
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
already available on the main drivers and should be used instead.
Newer drivers should use v4l_compat_translate_ioctl function to handle
old calls, replacing to newer ones.
Decoder iocts are using internally to allow video drivers to
communicate with video decoders. This should also be improved to allow
V4L2 calls being translated into compatible internal ioctls.
Who: Mauro Carvalho Chehab <>
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
normal hotpluggable bus, and with it using the default kernel
infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
control ioctl needed by cardmgr and cardctl from pcmcia-cs is
unnecessary, and makes further cleanups and integration of the
PCMCIA subsystem into the Linux kernel device driver model more
difficult. The features provided by cardmgr and cardctl are either
handled by the kernel itself now or are available in the new
pcmciautils package available at
Who: Dominik Brodowski <>
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
Why: kernel_thread is a low-level implementation detail. Drivers should
use the <linux/kthread.h> API instead which shields them from
implementation details and provides a higherlevel interface that
prevents bugs and code duplication
Who: Christoph Hellwig <>
When: June 2006
Why: Config option is there to see if gcc is good enough. (in january
2006). If it is, the behavior should just be the default. If it's not,
the option should just go away entirely.
Who: Arjan van de Ven
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
Who: Adrian Bunk <>
What: drivers depending on OSS_OBSOLETE_DRIVER
When: options in 2.6.20, code in 2.6.22
Why: OSS drivers with ALSA replacements
Who: Adrian Bunk <>
What: pci_module_init(driver)
When: January 2007
Why: Is replaced by pci_register_driver(pci_driver).
Who: Richard Knutsson <> and Greg Kroah-Hartman <>
What: Usage of invalid timevals in setitimer
When: March 2007
Why: POSIX requires to validate timevals in the setitimer call. This
was never done by Linux. The invalid (e.g. negative timevals) were
silently converted to more or less random timeouts and intervals.
Until the removal a per boot limited number of warnings is printed
and the timevals are sanitized.
Who: Thomas Gleixner <>
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
When: before 2.6.19
Why: Unused symbols are both increasing the size of the kernel binary
and are often a sign of "wrong API"
Who: Arjan van de Ven <>
What: mount/umount uevents
When: February 2007
Why: These events are not correct, and do not properly let userspace know
when a file system has been mounted or unmounted. Userspace should
poll the /proc/mounts file instead to detect this properly.
Who: Greg Kroah-Hartman <>
What: USB driver API moves to EXPORT_SYMBOL_GPL
When: February 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
Why: The USB subsystem has changed a lot over time, and it has been
possible to create userspace USB drivers using usbfs/libusb/gadgetfs
that operate as fast as the USB bus allows. Because of this, the USB
subsystem will not be allowing closed source kernel drivers to
register with it, after this grace period is over. If anyone needs
any help in converting their closed source drivers over to use the
userspace filesystems, please contact the mailing list, and the developers
there will be glad to help you out.
Who: Greg Kroah-Hartman <>
What: Interrupt only SA_* flags
When: Januar 2007
Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
out of the signal namespace.
Who: Thomas Gleixner <>
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
Class devices should not carry any of these properties, and bus
devices have SUBSYTEM and DRIVER as a replacement.
Who: Kay Sievers <>
What: i2c-isa
When: December 2006
Why: i2c-isa is a non-sense and doesn't fit in the device driver
model. Drivers relying on it are better implemented as platform
Who: Jean Delvare <>
When: July 2007
Why: Superfluous, given i2c_adapter.class_dev:
* The "dev" was a stand-in for the physical device node that legacy
drivers would not have; but now it's almost always present. Any
remaining legacy drivers must upgrade (they now trigger warnings).
* The "list" duplicates class device children.
The delay in removing this is so upgraded lm_sensors and libsensors
can get deployed. (Removal causes minor changes in the sysfs layout,
notably the location of the adapter type name and parenting the i2c
client hardware directly from their controller.)
Who: Jean Delvare <>,
David Brownell <>
What: drivers depending on OBSOLETE_OSS
When: options in 2.6.22, code in 2.6.24
Why: OSS drivers with ALSA replacements
Who: Adrian Bunk <>
What: IPv4 only connection tracking/NAT/helpers
When: 2.6.22
Why: The new layer 3 independant connection tracking replaces the old
IPv4 only version. After some stabilization of the new code the
old one will be removed.
Who: Patrick McHardy <>
What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
When: December 2006
Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
functionally very much similar. They talk to ACPI in same way. Only
difference between them is the way they do frequency transitions.
One uses MSRs and the other one uses IO ports. Functionaliy of
speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
That means one common driver will support all Intel Enhanced Speedstep
capable CPUs. That means less confusion over name of
speedstep-centrino driver (with that driver supposed to be used on
non-centrino platforms). That means less duplication of code and
less maintenance effort and no possibility of these two drivers
going out of sync.
Current users of speedstep_centrino with ACPI hooks are requested to
switch over to acpi-cpufreq driver. speedstep-centrino will continue
to work using older non-ACPI static table based scheme even after this
Who: Venkatesh Pallipadi <>
What: /sys/firmware/acpi/namespace
When: 2.6.21
Why: The ACPI namespace is effectively the symbol list for
the BIOS. The device names are completely arbitrary
and have no place being exposed to user-space.
For those interested in the BIOS ACPI namespace,
the BIOS can be extracted and disassembled with acpidump
and iasl as documented in the pmtools package here:
Who: Len Brown <>
What: ACPI procfs interface
When: July 2007
Why: After ACPI sysfs conversion, ACPI attributes will be duplicated
in sysfs and the ACPI procfs interface should be removed.
Who: Zhang Rui <>
What: /proc/acpi/button
When: August 2007
Why: /proc/acpi/button has been replaced by events to the input layer
since 2.6.20.
Who: Len Brown <>
What: sk98lin network driver
When: July 2007
Why: In kernel tree version of driver is unmaintained. Sk98lin driver
replaced by the skge driver.
Who: Stephen Hemminger <>
What: Compaq touchscreen device emulation
When: Oct 2007
Files: drivers/input/tsdev.c
Why: The code says it was obsolete when it was written in 2001.
tslib is a userspace library which does anything tsdev can do and
much more besides in userspace where this code belongs. There is no
longer any need for tsdev and applications should have converted to
use tslib by now.
The name "tsdev" is also extremely confusing and lots of people have
it loaded when they don't need/use it.
Who: Richard Purdie <>
What: Wireless extensions over netlink (CONFIG_NET_WIRELESS_RTNETLINK)
When: with the merge of wireless-dev, 2.6.22 or later
Why: The option/code is
* not enabled on most kernels
* not required by any userspace tools (except an experimental one,
and even there only for some parts, others use ioctl)
* pointless since wext is no longer evolving and the ioctl
interface needs to be kept
Who: Johannes Berg <>
What: i8xx_tco watchdog driver
When: in 2.6.22
Why: the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
watchdog driver.
Who: Wim Van Sebroeck <>