STM32 DT updates for v5.2, round 1

Highlights:
----------

MPU part:
 -Add initial support of stm32mp157a-dk1 board:
  This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
  and 512MB of DDR3. Several connections are available on this boards:
  4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

 -Add initial support of stm32mp157c-dk2 board:
  This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC
  with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
  than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
  Murata wifi/BT combo is added.

 -Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
  on stm32mp157a-dk1/dk2 boards.

 -Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
  on stm32mp157a-dk1/dk2 boards.

 -Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
  on stm32mp157a-dk1/dk2 boards.

 -Add sysconfig clock support on stm32mp157c.
 -Add romem and temperature calibration support on stm32mp157c.
 -Add SPDIFRX support on stm32mp157c.
 -Enable CEC on stm32mp157a-dk1/dk2.

MCU part:
 -Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
  boards.
 -Add romem and temperature calibration support on stm32f429
  (and so stm32f469).
 -Enable stm32f769 clock driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQIcBAABAgAGBQJcrzgEAAoJEH+ayWryHnCFhDMP/iRTr5Wcsj21zwv7vi4ntuCR
jkJ3820EGx2kVdxeNuCfMGwZKnCVefqca3AsjAgoD9FskUzdi82JQ2Tdl8B4MxFQ
lDuySiQs+7kkJuXccnOppz+ZcQRj3Ff0I5GlS3tvlAn1Ld6JqhBVEQ6DY6R8XBFx
ICkpoPKCpjkeZliOejNU7syY0vFrUoSjMz9tMncFJ8DkuioYISHNlj4f5P+MpWRZ
g8dbavXfQi/41yRH9KIvQiEy5ko5uDJxCac+JL7bkF522UJG93rEGn4K66JjYRX/
/vZ5ktE8oA6GUidPSbz/ETqlAwUQgzMFtI4mZo/lYjnf4bJ0VDJA0PEZmQn4RSb1
0JOiKROK6x/OPlDZ5qgrmtyW9HGEwWBl3UnmE8nrOA6tlqVICs7eK6meZuON/bBI
0xZiw6LQ5/ceiV2Lgpl8+n8tW8Plz9eRwDHvYKiBIxIqkY0j4U2tB6uggIfBjO1a
zLVE82ukIWN2brv5kZmf0cR0eLRrITetCMsQJnCUOhZpqbOcRq5WaUtrWqAiPI17
PBNv4UxyRwC4QjcslLBNPdYuoSyrFBw6ByOovsSde7TK3J0tuNAHa4JJULyjFTw+
YOTJz5a+One/weflamNb+FSzSW+lzcMiXjsMMU3z70CfdOqAxXE8l1/4Peg0hD/f
OKyq8WL/agAlfr1zgaj2
=k9wQ
-----END PGP SIGNATURE-----
ARM: dts: stm32: enable cec on stm32mp157a-dk1 board

Enable CEC (Consumer Electronics Control) device.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
1 file changed