blob: 8d8ee0ebf14c03dc96b95b8d98c2f2d2c73352c9 [file] [log] [blame]
/*
* linux/arch/arm/mach-sa1100/gpio.c
*
* Generic SA-1100 GPIO handling
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
return !!(GPLR & GPIO_GPIO(offset));
}
static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
if (value)
GPSR = GPIO_GPIO(offset);
else
GPCR = GPIO_GPIO(offset);
}
static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
{
unsigned long flags;
local_irq_save(flags);
GPDR &= ~GPIO_GPIO(offset);
local_irq_restore(flags);
return 0;
}
static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
{
unsigned long flags;
local_irq_save(flags);
sa1100_gpio_set(chip, offset, value);
GPDR |= GPIO_GPIO(offset);
local_irq_restore(flags);
return 0;
}
static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset)
{
return IRQ_GPIO0 + offset;
}
static struct gpio_chip sa1100_gpio_chip = {
.label = "gpio",
.direction_input = sa1100_direction_input,
.direction_output = sa1100_direction_output,
.set = sa1100_gpio_set,
.get = sa1100_gpio_get,
.to_irq = sa1100_to_irq,
.base = 0,
.ngpio = GPIO_MAX + 1,
};
/*
* SA1100 GPIO edge detection for IRQs:
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
* Use this instead of directly setting GRER/GFER.
*/
static int GPIO_IRQ_rising_edge;
static int GPIO_IRQ_falling_edge;
static int GPIO_IRQ_mask;
static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
{
unsigned int mask;
mask = BIT(d->hwirq);
if (type == IRQ_TYPE_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
return 0;
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
if (type & IRQ_TYPE_EDGE_RISING)
GPIO_IRQ_rising_edge |= mask;
else
GPIO_IRQ_rising_edge &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
GPIO_IRQ_falling_edge |= mask;
else
GPIO_IRQ_falling_edge &= ~mask;
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
return 0;
}
/*
* GPIO IRQs must be acknowledged.
*/
static void sa1100_gpio_ack(struct irq_data *d)
{
GEDR = BIT(d->hwirq);
}
static void sa1100_gpio_mask(struct irq_data *d)
{
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask &= ~mask;
GRER &= ~mask;
GFER &= ~mask;
}
static void sa1100_gpio_unmask(struct irq_data *d)
{
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask |= mask;
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
}
static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
{
if (on)
PWER |= BIT(d->hwirq);
else
PWER &= ~BIT(d->hwirq);
return 0;
}
/*
* This is for GPIO IRQs
*/
static struct irq_chip sa1100_gpio_irq_chip = {
.name = "GPIO",
.irq_ack = sa1100_gpio_ack,
.irq_mask = sa1100_gpio_mask,
.irq_unmask = sa1100_gpio_unmask,
.irq_set_type = sa1100_gpio_type,
.irq_set_wake = sa1100_gpio_wake,
};
static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
unsigned int irq, irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip,
handle_edge_irq);
irq_set_probe(irq);
return 0;
}
static const struct irq_domain_ops sa1100_gpio_irqdomain_ops = {
.map = sa1100_gpio_irqdomain_map,
.xlate = irq_domain_xlate_onetwocell,
};
static struct irq_domain *sa1100_gpio_irqdomain;
/*
* IRQ 0-11 (GPIO) handler. We enter here with the
* irq_controller_lock held, and IRQs disabled. Decode the IRQ
* and call the handler.
*/
static void sa1100_gpio_handler(struct irq_desc *desc)
{
unsigned int irq, mask;
mask = GEDR;
do {
/*
* clear down all currently active IRQ sources.
* We will be processing them all.
*/
GEDR = mask;
irq = IRQ_GPIO0;
do {
if (mask & 1)
generic_handle_irq(irq);
mask >>= 1;
irq++;
} while (mask);
mask = GEDR;
} while (mask);
}
static int sa1100_gpio_suspend(void)
{
/*
* Set the appropriate edges for wakeup.
*/
GRER = PWER & GPIO_IRQ_rising_edge;
GFER = PWER & GPIO_IRQ_falling_edge;
/*
* Clear any pending GPIO interrupts.
*/
GEDR = GEDR;
return 0;
}
static void sa1100_gpio_resume(void)
{
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
}
static struct syscore_ops sa1100_gpio_syscore_ops = {
.suspend = sa1100_gpio_suspend,
.resume = sa1100_gpio_resume,
};
static int __init sa1100_gpio_init_devicefs(void)
{
register_syscore_ops(&sa1100_gpio_syscore_ops);
return 0;
}
device_initcall(sa1100_gpio_init_devicefs);
void __init sa1100_init_gpio(void)
{
/* clear all GPIO edge detects */
GFER = 0;
GRER = 0;
GEDR = -1;
gpiochip_add_data(&sa1100_gpio_chip, NULL);
sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
28, IRQ_GPIO0,
&sa1100_gpio_irqdomain_ops, NULL);
/*
* Install handlers for GPIO 0-10 edge detect interrupts
*/
irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
/*
* Install handler for GPIO 11-27 edge detect interrupts
*/
irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
}