Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"This should be our final batch of fixes for 4.3:
- A patch from Sudeep Holla that fixes annotation of wakeup sources
properly, old unused format seems to have spread through copying.
- Two patches from Tony for OMAP. One dealing with MUSB setup
problems due to runtime PM being enabled too early on the parent
device. The other fixes IRQ numbering for OMAP1"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
usb: musb: omap2430: Fix regression caused by driver core change
ARM: OMAP1: fix incorrect INT_DMA_LCD
ARM: dts: fix gpio-keys wakeup-source property
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 955c24e..8c24975 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -35,28 +35,28 @@
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-1";
linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-2";
linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-3";
linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-4";
linux,code = <KEY_4>;
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 32a5ccb..e80e421 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -47,35 +47,35 @@
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0 0x4>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <3>;
label = "extkb1";
gpios = <&gpio4 23 0x4>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <4>;
label = "extkb2";
gpios = <&gpio4 24 0x4>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <5>;
label = "extkb3";
gpios = <&gpio5 1 0x4>;
};
button@5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <6>;
label = "extkb4";
gpios = <&gpio5 2 0x4>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 637e046..3c38668 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -61,42 +61,42 @@
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
button@5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
button@6 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <99>;
label = "NMI";
gpios = <&iofpga_gpio0 5 0x4>;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 70f2b8a..1bd9232 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -391,9 +391,20 @@
}
musb->isr = omap2430_musb_interrupt;
+ /*
+ * Enable runtime PM for musb parent (this driver). We can't
+ * do it earlier as struct musb is not yet allocated and we
+ * need to touch the musb registers for runtime PM.
+ */
+ pm_runtime_enable(glue->dev);
+ status = pm_runtime_get_sync(glue->dev);
+ if (status < 0)
+ goto err1;
+
status = pm_runtime_get_sync(dev);
if (status < 0) {
dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
+ pm_runtime_put_sync(glue->dev);
goto err1;
}
@@ -426,6 +437,7 @@
phy_power_on(musb->phy);
pm_runtime_put_noidle(musb->controller);
+ pm_runtime_put_noidle(glue->dev);
return 0;
err1:
@@ -626,7 +638,11 @@
goto err2;
}
- pm_runtime_enable(&pdev->dev);
+ /*
+ * Note that we cannot enable PM runtime yet for this
+ * driver as we need struct musb initialized first.
+ * See omap2430_musb_init above.
+ */
ret = platform_device_add(musb);
if (ret) {
@@ -675,11 +691,12 @@
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- if (musb) {
- omap2430_low_level_init(musb);
- musb_writel(musb->mregs, OTG_INTERFSEL,
- musb->context.otg_interfsel);
- }
+ if (!musb)
+ return -EPROBE_DEFER;
+
+ omap2430_low_level_init(musb);
+ musb_writel(musb->mregs, OTG_INTERFSEL,
+ musb->context.otg_interfsel);
return 0;
}
diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h
index e5a7013..88fa8af 100644
--- a/include/linux/omap-dma.h
+++ b/include/linux/omap-dma.h
@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
-#define INT_DMA_LCD 25
+#define INT_DMA_LCD (NR_IRQS_LEGACY + 25)
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
