| # |
| # Local PCMCIA Configuration File |
| # |
| #---------------------------------------------------------------------- |
| # |
| # System resources available for PCMCIA cards |
| # |
| # NOTE: these settings have no effect on resources assigned to a |
| # CardBus bridge device itself; this file only affects resources |
| # assigned to cards. Also, interrupt settings here will only affect |
| # ISA bus interrupts assigned to 16-bit cards. PCI interrupts |
| # generally can't be reconfigured. |
| # |
| # With the kernel PCMCIA subsystem, these settings also have no effect |
| # at all on resources used for 32-bit CardBus cards. Those are set by |
| # the PCI hotplug subsystem. |
| # |
| |
| # Allow all the dino/cujo port ranges (usually we get the first one) |
| # NOTE: the address range for this is a signed short (hence the upper |
| # limit is 0x7fff). If the PCMCIA card isn't on the dino/cujo bus |
| # which has been assigned this range, you're out of luck. In |
| # particular, PCMCIA won't work in a box with an EISA subsystem |
| # because that claims 0-0xffff. |
| include port 0x0-0x7fff |
| |
| # Allow all parisc I/O space |
| include memory 0xf0000000-0xffffffff |
| |