blob: dc1452f0d5d81a7cc931cb52fbe89b6f5751e706 [file] [log] [blame]
DesignWare HDMI bridge bindings
Required properties:
- compatible: platform specific such as:
* "snps,dw-hdmi-tx"
* "fsl,imx6q-hdmi"
* "fsl,imx6dl-hdmi"
* "rockchip,rk3288-dw-hdmi"
- reg: Physical base address and length of the controller's registers.
- interrupts: The HDMI interrupt number
- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
the clocks are soc specific, the clock-names should be "iahb", "isfr"
-port@[X]: SoC specific port nodes with endpoint definitions as defined
in Documentation/devicetree/bindings/media/video-interfaces.txt,
please refer to the SoC specific binding document:
* Documentation/devicetree/bindings/display/imx/hdmi.txt
* Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
Optional properties
- reg-io-width: the width of the reg:1,4, default set to 1 if not present
- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
Example:
hdmi: hdmi@0120000 {
compatible = "fsl,imx6q-hdmi";
reg = <0x00120000 0x9000>;
interrupts = <0 115 0x04>;
gpr = <&gpr>;
clocks = <&clks 123>, <&clks 124>;
clock-names = "iahb", "isfr";
ddc-i2c-bus = <&i2c2>;
port@0 {
reg = <0>;
hdmi_mux_0: endpoint {
remote-endpoint = <&ipu1_di0_hdmi>;
};
};
port@1 {
reg = <1>;
hdmi_mux_1: endpoint {
remote-endpoint = <&ipu1_di1_hdmi>;
};
};
};