blob: e34e85f8f7b21b8691a45cac3c4e575920d20bb9 [file] [log] [blame]
From: Fabio Estevam <fabio.estevam@nxp.com>
Date: Wed, 17 Aug 2016 12:41:08 -0300
Subject: can: flexcan: fix resume function
commit 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 upstream.
On a imx6ul-pico board the following error is seen during system suspend:
dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110
PM: Device 2090000.flexcan failed to resume: error -110
The reason for this suspend error is because when the CAN interface is not
active the clocks are disabled and then flexcan_chip_enable() will
always fail due to a timeout error.
In order to fix this issue, only call flexcan_chip_enable/disable()
when the CAN interface is active.
Based on a patch from Dong Aisheng in the NXP kernel.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/can/flexcan.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1248,11 +1248,10 @@ static int __maybe_unused flexcan_suspen
struct flexcan_priv *priv = netdev_priv(dev);
int err;
- err = flexcan_chip_disable(priv);
- if (err)
- return err;
-
if (netif_running(dev)) {
+ err = flexcan_chip_disable(priv);
+ if (err)
+ return err;
netif_stop_queue(dev);
netif_device_detach(dev);
}
@@ -1265,13 +1264,17 @@ static int __maybe_unused flexcan_resume
{
struct net_device *dev = dev_get_drvdata(device);
struct flexcan_priv *priv = netdev_priv(dev);
+ int err;
priv->can.state = CAN_STATE_ERROR_ACTIVE;
if (netif_running(dev)) {
netif_device_attach(dev);
netif_start_queue(dev);
+ err = flexcan_chip_enable(priv);
+ if (err)
+ return err;
}
- return flexcan_chip_enable(priv);
+ return 0;
}
static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume);