| ACT8865 regulator |
| ------------------- |
| |
| Required properties: |
| - compatible: "active-semi,act8865" |
| - reg: I2C slave address |
| |
| Any standard regulator properties can be used to configure the single regulator. |
| |
| The valid names for regulators are: |
| DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. |
| |
| Example: |
| -------- |
| |
| i2c1: i2c@f0018000 { |
| pmic: act8865@5b { |
| compatible = "active-semi,act8865"; |
| reg = <0x5b>; |
| status = "disabled"; |
| |
| regulators { |
| vcc_1v8_reg: DCDC_REG1 { |
| regulator-name = "VCC_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| vcc_1v2_reg: DCDC_REG2 { |
| regulator-name = "VCC_1V2"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-suspend-mem-microvolt = <1150000>; |
| regulator-suspend-standby-microvolt = <1150000>; |
| regulator-always-on; |
| }; |
| |
| vcc_3v3_reg: DCDC_REG3 { |
| regulator-name = "VCC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vddana_reg: LDO_REG1 { |
| regulator-name = "VDDANA"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vddfuse_reg: LDO_REG2 { |
| regulator-name = "FUSE_2V5"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| }; |
| }; |
| }; |
