| <?xml version="1.0"?> |
| <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> |
| <xsl:output method="text" version="1.0" encoding="UTF-8" indent="no"/> |
| |
| <!-- --> |
| <!-- Main report framework --> |
| <!-- --> |
| <xsl:template match="/rteval"> |
| <xsl:text> =================================================================== </xsl:text> |
| <xsl:text> rteval (v</xsl:text><xsl:value-of select="@version"/><xsl:text>) report </xsl:text> |
| <xsl:text> ------------------------------------------------------------------- </xsl:text> |
| <xsl:text> Test run: </xsl:text> |
| <xsl:value-of select="run_info/date"/><xsl:text> </xsl:text><xsl:value-of select="run_info/time"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Run time: </xsl:text> |
| <xsl:value-of select="run_info/@days"/><xsl:text> days </xsl:text> |
| <xsl:value-of select="run_info/@hours"/><xsl:text>h </xsl:text> |
| <xsl:value-of select="run_info/@minutes"/><xsl:text>m </xsl:text> |
| <xsl:value-of select="run_info/@seconds"/><xsl:text>s</xsl:text> |
| <xsl:text> </xsl:text> |
| <xsl:if test="run_info/annotate"> |
| <xsl:text> Remarks: </xsl:text> |
| <xsl:value-of select="run_info/annotate"/> |
| </xsl:if> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Tested node: </xsl:text> |
| <xsl:value-of select="SystemInfo/uname/node|uname/node"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Model: </xsl:text> |
| <xsl:value-of select="SystemInfo/DMIinfo/HardwareInfo/GeneralInfo/Manufacturer|HardwareInfo/GeneralInfo/ProductName"/> |
| <xsl:text> - </xsl:text><xsl:value-of select="SystemInfo/DMIinfo/HardwareInfo/GeneralInfo/ProductName|HardwareInfo/GeneralInfo/ProductName"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> BIOS version: </xsl:text> |
| <xsl:value-of select="SystemInfo/DMIinfo/HardwareInfo/BIOS|HardwareInfo/BIOS"/> |
| <xsl:text> (ver: </xsl:text> |
| <xsl:value-of select="SystemInfo/DMIinfo/HardwareInfo/BIOS/@Version|HardwareInfo/BIOS/@Version"/> |
| <xsl:text>, rev :</xsl:text> |
| <xsl:value-of select="SystemInfo/DMIinfo/HardwareInfo/BIOS/@BIOSrevision|HardwareInfo/BIOS/@BIOSrevision"/> |
| <xsl:text>, release date: </xsl:text> |
| <xsl:value-of select="SystemInfo/DMIinfo/HardwareInfo/BIOS/@ReleaseDate|HardwareInfo/BIOS/@ReleaseDate"/> |
| <xsl:text>)</xsl:text> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> CPU cores: </xsl:text> |
| <xsl:choose> |
| <xsl:when test="SystemInfo/CPUtopology"> |
| <xsl:value-of select="SystemInfo/CPUtopology/@num_cpu_cores"/> |
| <xsl:text> (online: </xsl:text> |
| <xsl:value-of select="SystemInfo/CPUtopology/@num_cpu_cores_online"/> |
| <xsl:text>)</xsl:text> |
| </xsl:when> |
| <xsl:when test="hardware/cpu_topology"> |
| <xsl:value-of select="hardware/cpu_topology/@num_cpu_cores"/> |
| <xsl:text> (online: </xsl:text> |
| <xsl:value-of select="hardware/cpu_topology/@num_cpu_cores_online"/> |
| <xsl:text>)</xsl:text> |
| </xsl:when> |
| <xsl:when test="hardware/cpu_cores"> |
| <xsl:value-of select="hardware/cpu_cores"/> |
| </xsl:when> |
| <xsl:otherwise>(unknown)</xsl:otherwise> |
| </xsl:choose> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> NUMA Nodes: </xsl:text> |
| <xsl:choose> |
| <xsl:when test="SystemInfo/Memory/numa_nodes"> |
| <xsl:value-of select="SystemInfo/Memory/numa_nodes"/> |
| </xsl:when> |
| <xsl:when test="hardware/numa_nodes"> |
| <xsl:value-of select="hardware/numa_nodes"/> |
| </xsl:when> |
| <xsl:otherwise>(unknown)</xsl:otherwise> |
| </xsl:choose> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Memory: </xsl:text> |
| <xsl:value-of select="SystemInfo/Memory/memory_size|hardware/memory_size"/> |
| <xsl:choose> |
| <xsl:when test="SystemInfo/Memory/memory_size/@unit"> |
| <xsl:value-of select="concat(' ',SystemInfo/Memory/memory_size/@unit)"/> |
| </xsl:when> |
| <xsl:when test="hardware/memory_size/@unit"> |
| <xsl:value-of select="concat(' ',hardware/memory_size/@unit)"/> |
| </xsl:when> |
| <xsl:otherwise> |
| <xsl:text> kB</xsl:text> |
| </xsl:otherwise> |
| </xsl:choose> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Kernel: </xsl:text> |
| <xsl:value-of select="SystemInfo/uname/kernel|uname/kernel"/> |
| <xsl:if test="SystemInfo/uname/kernel/@is_RT = '1' or uname/kernel/@is_RT = '1'"> (RT enabled)</xsl:if> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Base OS: </xsl:text> |
| <xsl:value-of select="SystemInfo/uname/baseos|uname/baseos"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Architecture: </xsl:text> |
| <xsl:value-of select="SystemInfo/uname/arch|uname/arch"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Clocksource: </xsl:text> |
| <xsl:value-of select="SystemInfo/Kernel/ClockSource/source[@current='1']|clocksource/current"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Available: </xsl:text> |
| <xsl:choose> |
| <xsl:when test="SystemInfo/Kernel/ClockSource/source"> |
| <xsl:for-each select="SystemInfo/Kernel/ClockSource/source"> |
| <xsl:value-of select="."/> |
| <xsl:text> </xsl:text> |
| </xsl:for-each> |
| </xsl:when> |
| <xsl:when test="clocksource/available"> |
| <xsl:value-of select="clocksource/available"/> |
| </xsl:when> |
| <xsl:otherwise>(unknown)</xsl:otherwise> |
| </xsl:choose> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> System load: </xsl:text> |
| <xsl:text> Load average: </xsl:text> |
| <xsl:value-of select="loads/@load_average"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:if test="loads/command_line"> |
| <xsl:text> </xsl:text> |
| <xsl:text> Executed loads: </xsl:text> |
| <xsl:apply-templates select="loads/command_line"/> |
| </xsl:if> |
| <xsl:text> </xsl:text> |
| <!-- Generate a summary report for all measurement profiles --> |
| <xsl:apply-templates select="Measurements/Profile"/> |
| <xsl:text> =================================================================== </xsl:text> |
| </xsl:template> |
| <!-- --> |
| <!-- End of main report framework --> |
| <!-- --> |
| |
| |
| <!-- Formats and lists all used commands lines --> |
| <xsl:template match="command_line"> |
| <xsl:text> - </xsl:text> |
| <xsl:value-of select="@name"/> |
| <xsl:text>: </xsl:text> |
| <xsl:choose> |
| <xsl:when test="not(@run) or @run = '1'"> |
| <xsl:value-of select="."/> |
| </xsl:when> |
| <xsl:otherwise>(Not run)</xsl:otherwise> |
| </xsl:choose> |
| <xsl:text> </xsl:text> |
| </xsl:template> |
| |
| |
| <xsl:template match="/rteval/Measurements/Profile"> |
| <xsl:text> Measurement profile </xsl:text> |
| <xsl:value-of select="position()"/><xsl:text>: </xsl:text> |
| <xsl:choose> |
| <xsl:when test="@loads = '1'"><xsl:text>With loads, </xsl:text></xsl:when> |
| <xsl:otherwise><xsl:text>Without loads, </xsl:text></xsl:otherwise> |
| </xsl:choose> |
| <xsl:choose> |
| <xsl:when test="@parallel = '1'"> |
| <xsl:text>measurements in parallel</xsl:text> |
| </xsl:when> |
| <xsl:otherwise> |
| <xsl:text>measurements serialised</xsl:text> |
| </xsl:otherwise> |
| </xsl:choose> |
| <xsl:text> </xsl:text> |
| |
| <!-- Format other sections of the report, if they are found --> |
| <!-- To add support for even more sections, just add them into the existing --> |
| <!-- xsl:apply-tempaltes tag, separated with pipe(|) --> |
| <!-- --> |
| <!-- select="cyclictest|new_foo_section|another_section" --> |
| <!-- --> |
| <xsl:apply-templates select="cyclictest|hwlatdetect[@format='1.0']|sysstat"/> |
| <xsl:text> </xsl:text> |
| </xsl:template> |
| |
| <!-- Format the cyclic test section of the report --> |
| <xsl:template match="/rteval/Measurements/Profile/cyclictest"> |
| <xsl:text> Latency test </xsl:text> |
| |
| <xsl:text> Started: </xsl:text> |
| <xsl:value-of select="timestamps/runloop_start"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Stopped: </xsl:text> |
| <xsl:value-of select="timestamps/runloop_stop"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Command: </xsl:text> |
| <xsl:value-of select="@command_line"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:apply-templates select="abort_report"/> |
| |
| <xsl:text> System: </xsl:text> |
| <xsl:value-of select="system/@description"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Statistics: </xsl:text> |
| <xsl:apply-templates select="system/statistics"/> |
| |
| <!-- Add CPU core info and stats--> |
| <xsl:apply-templates select="core"> |
| <xsl:sort select="@id" data-type="number"/> |
| </xsl:apply-templates> |
| </xsl:template> |
| |
| |
| <!-- Format the CPU core section in the cyclict test part --> |
| <xsl:template match="/rteval/Measurements/Profile/cyclictest/core"> |
| <xsl:text> CPU core </xsl:text> |
| <xsl:value-of select="@id"/> |
| <xsl:text> Priority: </xsl:text> |
| <xsl:value-of select="@priority"/> |
| <xsl:text> </xsl:text> |
| <xsl:text> Statistics: </xsl:text> |
| <xsl:text> </xsl:text> |
| <xsl:apply-templates select="statistics"/> |
| </xsl:template> |
| |
| |
| <!-- Generic formatting of statistics information --> |
| <xsl:template match="/rteval/Measurements/Profile/cyclictest/*/statistics"> |
| <xsl:text> Samples: </xsl:text> |
| <xsl:value-of select="samples"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:if test="samples > 0"> |
| <xsl:text> Mean: </xsl:text> |
| <xsl:value-of select="mean"/> |
| <xsl:value-of select="mean/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Median: </xsl:text> |
| <xsl:value-of select="median"/> |
| <xsl:value-of select="median/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Mode: </xsl:text> |
| <xsl:value-of select="mode"/> |
| <xsl:value-of select="mode/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Range: </xsl:text> |
| <xsl:value-of select="range"/> |
| <xsl:value-of select="range/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Min: </xsl:text> |
| <xsl:value-of select="minimum"/> |
| <xsl:value-of select="minimum/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Max: </xsl:text> |
| <xsl:value-of select="maximum"/> |
| <xsl:value-of select="maximum/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Mean Absolute Dev: </xsl:text> |
| <xsl:value-of select="mean_absolute_deviation"/> |
| <xsl:value-of select="mean_absolute_deviation/@unit"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Std.dev: </xsl:text> |
| <xsl:value-of select="standard_deviation"/> |
| <xsl:value-of select="standard_deviation/@unit"/> |
| <xsl:text> </xsl:text> |
| </xsl:if> |
| <xsl:text> </xsl:text> |
| </xsl:template> |
| |
| |
| <!-- Format the hwlatdetect test section of the report --> |
| <xsl:template match="/rteval/Measurements/Profile/hwlatdetect[@format='1.0' and not(@aborted)]"> |
| <xsl:text> Hardware latency detector </xsl:text> |
| |
| <xsl:text> Run duration: </xsl:text> |
| <xsl:value-of select="RunParams/@duration"/> |
| <xsl:text> seconds </xsl:text> |
| |
| <xsl:text> Threshold: </xsl:text> |
| <xsl:value-of select="RunParams/@threshold"/> |
| <xsl:text>us </xsl:text> |
| |
| <xsl:text> Width: </xsl:text> |
| <xsl:value-of select="RunParams/@width"/> |
| <xsl:text>us </xsl:text> |
| |
| <xsl:text> Window size: </xsl:text> |
| <xsl:value-of select="RunParams/@window"/> |
| <xsl:text>us </xsl:text> |
| |
| <xsl:text> Threshold exceeded </xsl:text> |
| <xsl:value-of select="samples/@count"/> |
| <xsl:text> times </xsl:text> |
| <xsl:apply-templates select="samples/sample"/> |
| </xsl:template> |
| |
| <xsl:template match="/rteval/Measurements/Profile/hwlatdetect[@format='1.0' and @aborted > 0]"> |
| <xsl:text> Hardware latency detector </xsl:text> |
| <xsl:text> ** WARNING ** hwlatedect failed to run </xsl:text> |
| </xsl:template> |
| |
| <xsl:template match="/rteval/Measurements/Profile/hwlatdetect[@format='1.0']/samples/sample"> |
| <xsl:text> - @</xsl:text> |
| <xsl:value-of select="@timestamp"/> |
| <xsl:text> </xsl:text> |
| <xsl:value-of select="@duration"/> |
| <xsl:text>us </xsl:text> |
| </xsl:template> |
| |
| <!-- Format the cyclic test section of the report --> |
| <xsl:template match="/rteval/Measurements/Profile/sysstat"> |
| <xsl:text> sysstat measurements </xsl:text> |
| |
| <xsl:text> Started: </xsl:text> |
| <xsl:value-of select="timestamps/runloop_start"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Stopped: </xsl:text> |
| <xsl:value-of select="timestamps/runloop_stop"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:text> Records saved: </xsl:text> |
| <xsl:value-of select="@num_entries"/> |
| <xsl:text> </xsl:text> |
| </xsl:template> |
| |
| <!-- Format information about aborts - if present --> |
| <xsl:template match="abort_report"> |
| <xsl:text> Run aborted: </xsl:text> |
| <xsl:value-of select="@reason"/> |
| <xsl:text> </xsl:text> |
| |
| <xsl:if test="breaktrace"> |
| <xsl:text> </xsl:text> |
| <xsl:text>Aborted due to latency exceeding </xsl:text> |
| <xsl:value-of select="breaktrace/@latency_threshold"/> |
| <xsl:text>us. </xsl:text> |
| <xsl:text> </xsl:text> |
| <xsl:text>Measured latency when stopping was </xsl:text> |
| <xsl:value-of select="breaktrace/@measured_latency"/> |
| <xsl:text>us. </xsl:text> |
| </xsl:if> |
| </xsl:template> |
| |
| </xsl:stylesheet> |
