sound/soc/sti/uniperif_reader.c - pub/scm/linux/kernel/git/cmarinas/linux-aarch64 - Git at Google

 /*
  * Copyright (C) STMicroelectronics SA 2015
  * Authors: Arnaud Pouliquen <arnaud.pouliquen@st.com>
  *          for STMicroelectronics.
  * License terms:  GNU General Public License (GPL), version 2
  */

 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>

 #include <sound/soc.h>

 #include "uniperif.h"

 /*
  * Note: snd_pcm_hardware is linked to DMA controller but is declared here to
  * integrate unireader capability in term of rate and supported channels
  */
 static const struct snd_pcm_hardware uni_reader_pcm_hw = {
 	.info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
 		SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP |
 		SNDRV_PCM_INFO_MMAP_VALID,
 	.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE,

 	.rates = SNDRV_PCM_RATE_CONTINUOUS,
 	.rate_min = 8000,
 	.rate_max = 96000,

 	.channels_min = 2,
 	.channels_max = 8,

 	.periods_min = 2,
 	.periods_max = 48,

 	.period_bytes_min = 128,
 	.period_bytes_max = 64 * PAGE_SIZE,
 	.buffer_bytes_max = 256 * PAGE_SIZE
 };

 /*
  * uni_reader_irq_handler
  * In case of error audio stream is stopped; stop action is protected via PCM
  * stream lock  to avoid race condition with trigger callback.
  */
 static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id)
 {
 	irqreturn_t ret = IRQ_NONE;
 	struct uniperif *reader = dev_id;
 	unsigned int status;

 	if (reader->state == UNIPERIF_STATE_STOPPED) {
 		/* Unexpected IRQ: do nothing */
 		dev_warn(reader->dev, "unexpected IRQ ");
 		return IRQ_HANDLED;
 	}

 	/* Get interrupt status & clear them immediately */
 	status = GET_UNIPERIF_ITS(reader);
 	SET_UNIPERIF_ITS_BCLR(reader, status);

 	/* Check for fifo overflow error */
 	if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
 		dev_err(reader->dev, "FIFO error detected");

 		snd_pcm_stream_lock(reader->substream);
 		snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
 		snd_pcm_stream_unlock(reader->substream);

 		return IRQ_HANDLED;
 	}

 	return ret;
 }

 static int uni_reader_prepare(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
 	struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
 	struct uniperif *reader = priv->dai_data.uni;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	int transfer_size, trigger_limit;
 	int slot_width;
 	int count = 10;

 	/* The reader should be stopped */
 	if (reader->state != UNIPERIF_STATE_STOPPED) {
 		dev_err(reader->dev, "%s: invalid reader state %d", __func__,
 			reader->state);
 		return -EINVAL;
 	}

 	/* Calculate transfer size (in fifo cells and bytes) for frame count */
 	transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES;

 	/* Calculate number of empty cells available before asserting DREQ */
 	if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0)
 		trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size;
 	else
 		/*
 		 * Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0
 		 * FDMA_TRIGGER_LIMIT also controls when the state switches
 		 * from OFF or STANDBY to AUDIO DATA.
 		 */
 		trigger_limit = transfer_size;

 	/* Trigger limit must be an even number */
 	if ((!trigger_limit % 2) ||
 	    (trigger_limit != 1 && transfer_size % 2) ||
 	    (trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) {
 		dev_err(reader->dev, "invalid trigger limit %d", trigger_limit);
 		return -EINVAL;
 	}

 	SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit);

 	switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_IB_IF:
 	case SND_SOC_DAIFMT_NB_IF:
 		SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader);
 		break;
 	default:
 		SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader);
 	}

 	/* Force slot width to 32 in I2S mode */
 	if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK)
 		== SND_SOC_DAIFMT_I2S) {
 		slot_width = 32;
 	} else {
 		switch (runtime->format) {
 		case SNDRV_PCM_FORMAT_S16_LE:
 			slot_width = 16;
 			break;
 		default:
 			slot_width = 32;
 			break;
 		}
 	}

 	/* Number of bits per subframe (i.e one channel sample) on input. */
 	switch (slot_width) {
 	case 32:
 		SET_UNIPERIF_I2S_FMT_NBIT_32(reader);
 		SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader);
 		break;
 	case 16:
 		SET_UNIPERIF_I2S_FMT_NBIT_16(reader);
 		SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader);
 		break;
 	default:
 		dev_err(reader->dev, "subframe format not supported");
 		return -EINVAL;
 	}

 	/* Configure data memory format */
 	switch (runtime->format) {
 	case SNDRV_PCM_FORMAT_S16_LE:
 		/* One data word contains two samples */
 		SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader);
 		break;

 	case SNDRV_PCM_FORMAT_S32_LE:
 		/*
 		 * Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits
 		 * on the MSB then zeros (if less than 32 bytes)"...
 		 */
 		SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader);
 		break;

 	default:
 		dev_err(reader->dev, "format not supported");
 		return -EINVAL;
 	}

 	switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
 		SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader);
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
 		SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
 		SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
 		break;
 	case SND_SOC_DAIFMT_RIGHT_J:
 		SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader);
 		SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
 		break;
 	default:
 		dev_err(reader->dev, "format not supported");
 		return -EINVAL;
 	}

 	SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader);

 	/* Data clocking (changing) on the rising edge */
 	SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader);

 	/* Number of channels must be even */

 	if ((runtime->channels % 2) || (runtime->channels < 2) ||
 	    (runtime->channels > 10)) {
 		dev_err(reader->dev, "%s: invalid nb of channels", __func__);
 		return -EINVAL;
 	}

 	SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2);

 	/* Clear any pending interrupts */
 	SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader));

 	SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0);

 	/* Set the interrupt mask */
 	SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader);
 	SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
 	SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader);

 	/* Enable underflow recovery interrupts */
 	if (reader->info->underflow_enabled) {
 		SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader);
 		SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader);
 	}

 	/* Reset uniperipheral reader */
 	SET_UNIPERIF_SOFT_RST_SOFT_RST(reader);

 	while (GET_UNIPERIF_SOFT_RST_SOFT_RST(reader)) {
 		udelay(5);
 		count--;
 	}
 	if (!count) {
 		dev_err(reader->dev, "Failed to reset uniperif");
 		return -EIO;
 	}

 	return 0;
 }

 static int uni_reader_start(struct uniperif *reader)
 {
 	/* The reader should be stopped */
 	if (reader->state != UNIPERIF_STATE_STOPPED) {
 		dev_err(reader->dev, "%s: invalid reader state", __func__);
 		return -EINVAL;
 	}

 	/* Enable reader interrupts (and clear possible stalled ones) */
 	SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader);
 	SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);

 	/* Launch the reader */
 	SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader);

 	/* Update state to started */
 	reader->state = UNIPERIF_STATE_STARTED;
 	return 0;
 }

 static int uni_reader_stop(struct uniperif *reader)
 {
 	/* The reader should not be in stopped state */
 	if (reader->state == UNIPERIF_STATE_STOPPED) {
 		dev_err(reader->dev, "%s: invalid reader state", __func__);
 		return -EINVAL;
 	}

 	/* Turn the reader off */
 	SET_UNIPERIF_CTRL_OPERATION_OFF(reader);

 	/* Disable interrupts */
 	SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader));

 	/* Update state to stopped and return */
 	reader->state = UNIPERIF_STATE_STOPPED;

 	return 0;
 }

 static int  uni_reader_trigger(struct snd_pcm_substream *substream,
 			       int cmd, struct snd_soc_dai *dai)
 {
 	struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
 	struct uniperif *reader = priv->dai_data.uni;

 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 		return  uni_reader_start(reader);
 	case SNDRV_PCM_TRIGGER_STOP:
 		return  uni_reader_stop(reader);
 	default:
 		return -EINVAL;
 	}
 }

 static void uni_reader_shutdown(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *dai)
 {
 	struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
 	struct uniperif *reader = priv->dai_data.uni;

 	if (reader->state != UNIPERIF_STATE_STOPPED) {
 		/* Stop the reader */
 		uni_reader_stop(reader);
 	}
 }

 static int uni_reader_parse_dt(struct platform_device *pdev,
 			       struct uniperif *reader)
 {
 	struct uniperif_info *info;
 	struct device_node *node = pdev->dev.of_node;

 	/* Allocate memory for the info structure */
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;

 	if (of_property_read_u32(node, "version", &reader->ver) ||
 	    reader->ver == SND_ST_UNIPERIF_VERSION_UNKNOWN) {
 		dev_err(&pdev->dev, "Unknown uniperipheral version ");
 		return -EINVAL;
 	}

 	/* Save the info structure */
 	reader->info = info;

 	return 0;
 }

 static const struct snd_soc_dai_ops uni_reader_dai_ops = {
 		.shutdown = uni_reader_shutdown,
 		.prepare = uni_reader_prepare,
 		.trigger = uni_reader_trigger,
 		.hw_params = sti_uniperiph_dai_hw_params,
 		.set_fmt = sti_uniperiph_dai_set_fmt,
 };

 int uni_reader_init(struct platform_device *pdev,
 		    struct uniperif *reader)
 {
 	int ret = 0;

 	reader->dev = &pdev->dev;
 	reader->state = UNIPERIF_STATE_STOPPED;
 	reader->hw = &uni_reader_pcm_hw;
 	reader->dai_ops = &uni_reader_dai_ops;

 	dev_err(reader->dev, "%s: enter\n", __func__);
 	ret = uni_reader_parse_dt(pdev, reader);
 	if (ret < 0) {
 		dev_err(reader->dev, "Failed to parse DeviceTree");
 		return ret;
 	}

 	ret = devm_request_irq(&pdev->dev, reader->irq,
 			       uni_reader_irq_handler, IRQF_SHARED,
 			       dev_name(&pdev->dev), reader);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to request IRQ");
 		return -EBUSY;
 	}

 	return 0;
 }
 EXPORT_SYMBOL_GPL(uni_reader_init);
	/*
	* Copyright (C) STMicroelectronics SA 2015
	* Authors: Arnaud Pouliquen <arnaud.pouliquen@st.com>
	* for STMicroelectronics.
	* License terms: GNU General Public License (GPL), version 2
	*/

	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/io.h>

	#include <sound/soc.h>

	#include "uniperif.h"

	/*
	* Note: snd_pcm_hardware is linked to DMA controller but is declared here to
	* integrate unireader capability in term of rate and supported channels
	*/
	static const struct snd_pcm_hardware uni_reader_pcm_hw = {
	.info = SNDRV_PCM_INFO_INTERLEAVED \| SNDRV_PCM_INFO_BLOCK_TRANSFER \|
	SNDRV_PCM_INFO_PAUSE \| SNDRV_PCM_INFO_MMAP \|
	SNDRV_PCM_INFO_MMAP_VALID,
	.formats = SNDRV_PCM_FMTBIT_S32_LE \| SNDRV_PCM_FMTBIT_S16_LE,

	.rates = SNDRV_PCM_RATE_CONTINUOUS,
	.rate_min = 8000,
	.rate_max = 96000,

	.channels_min = 2,
	.channels_max = 8,

	.periods_min = 2,
	.periods_max = 48,

	.period_bytes_min = 128,
	.period_bytes_max = 64 * PAGE_SIZE,
	.buffer_bytes_max = 256 * PAGE_SIZE
	};

	/*
	* uni_reader_irq_handler
	* In case of error audio stream is stopped; stop action is protected via PCM
	* stream lock to avoid race condition with trigger callback.
	*/
	static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id)
	{
	irqreturn_t ret = IRQ_NONE;
	struct uniperif *reader = dev_id;
	unsigned int status;

	if (reader->state == UNIPERIF_STATE_STOPPED) {
	/* Unexpected IRQ: do nothing */
	dev_warn(reader->dev, "unexpected IRQ ");
	return IRQ_HANDLED;
	}

	/* Get interrupt status & clear them immediately */
	status = GET_UNIPERIF_ITS(reader);
	SET_UNIPERIF_ITS_BCLR(reader, status);

	/* Check for fifo overflow error */
	if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
	dev_err(reader->dev, "FIFO error detected");

	snd_pcm_stream_lock(reader->substream);
	snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
	snd_pcm_stream_unlock(reader->substream);

	return IRQ_HANDLED;
	}

	return ret;
	}

	static int uni_reader_prepare(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
	{
	struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
	struct uniperif *reader = priv->dai_data.uni;
	struct snd_pcm_runtime *runtime = substream->runtime;
	int transfer_size, trigger_limit;
	int slot_width;
	int count = 10;

	/* The reader should be stopped */
	if (reader->state != UNIPERIF_STATE_STOPPED) {
	dev_err(reader->dev, "%s: invalid reader state %d", __func__,
	reader->state);
	return -EINVAL;
	}

	/* Calculate transfer size (in fifo cells and bytes) for frame count */
	transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES;

	/* Calculate number of empty cells available before asserting DREQ */
	if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0)
	trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size;
	else
	/*
	* Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0
	* FDMA_TRIGGER_LIMIT also controls when the state switches
	* from OFF or STANDBY to AUDIO DATA.
	*/
	trigger_limit = transfer_size;

	/* Trigger limit must be an even number */
	if ((!trigger_limit % 2) \|\|
	(trigger_limit != 1 && transfer_size % 2) \|\|
	(trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) {
	dev_err(reader->dev, "invalid trigger limit %d", trigger_limit);
	return -EINVAL;
	}

	SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit);

	switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) {
	case SND_SOC_DAIFMT_IB_IF:
	case SND_SOC_DAIFMT_NB_IF:
	SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader);
	break;
	default:
	SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader);
	}

	/* Force slot width to 32 in I2S mode */
	if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK)
	== SND_SOC_DAIFMT_I2S) {
	slot_width = 32;
	} else {
	switch (runtime->format) {
	case SNDRV_PCM_FORMAT_S16_LE:
	slot_width = 16;
	break;
	default:
	slot_width = 32;
	break;
	}
	}

	/* Number of bits per subframe (i.e one channel sample) on input. */
	switch (slot_width) {
	case 32:
	SET_UNIPERIF_I2S_FMT_NBIT_32(reader);
	SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader);
	break;
	case 16:
	SET_UNIPERIF_I2S_FMT_NBIT_16(reader);
	SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader);
	break;
	default:
	dev_err(reader->dev, "subframe format not supported");
	return -EINVAL;
	}

	/* Configure data memory format */
	switch (runtime->format) {
	case SNDRV_PCM_FORMAT_S16_LE:
	/* One data word contains two samples */
	SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader);
	break;

	case SNDRV_PCM_FORMAT_S32_LE:
	/*
	* Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits
	* on the MSB then zeros (if less than 32 bytes)"...
	*/
	SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader);
	break;

	default:
	dev_err(reader->dev, "format not supported");
	return -EINVAL;
	}

	switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_I2S:
	SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
	SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader);
	break;
	case SND_SOC_DAIFMT_LEFT_J:
	SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
	SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
	break;
	case SND_SOC_DAIFMT_RIGHT_J:
	SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader);
	SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
	break;
	default:
	dev_err(reader->dev, "format not supported");
	return -EINVAL;
	}

	SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader);

	/* Data clocking (changing) on the rising edge */
	SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader);

	/* Number of channels must be even */

	if ((runtime->channels % 2) \|\| (runtime->channels < 2) \|\|
	(runtime->channels > 10)) {
	dev_err(reader->dev, "%s: invalid nb of channels", __func__);
	return -EINVAL;
	}

	SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2);

	/* Clear any pending interrupts */
	SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader));

	SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0);

	/* Set the interrupt mask */
	SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader);
	SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
	SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader);

	/* Enable underflow recovery interrupts */
	if (reader->info->underflow_enabled) {
	SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader);
	SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader);
	}

	/* Reset uniperipheral reader */
	SET_UNIPERIF_SOFT_RST_SOFT_RST(reader);

	while (GET_UNIPERIF_SOFT_RST_SOFT_RST(reader)) {
	udelay(5);
	count--;
	}
	if (!count) {
	dev_err(reader->dev, "Failed to reset uniperif");
	return -EIO;
	}

	return 0;
	}

	static int uni_reader_start(struct uniperif *reader)
	{
	/* The reader should be stopped */
	if (reader->state != UNIPERIF_STATE_STOPPED) {
	dev_err(reader->dev, "%s: invalid reader state", __func__);
	return -EINVAL;
	}

	/* Enable reader interrupts (and clear possible stalled ones) */
	SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader);
	SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);

	/* Launch the reader */
	SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader);

	/* Update state to started */
	reader->state = UNIPERIF_STATE_STARTED;
	return 0;
	}

	static int uni_reader_stop(struct uniperif *reader)
	{
	/* The reader should not be in stopped state */
	if (reader->state == UNIPERIF_STATE_STOPPED) {
	dev_err(reader->dev, "%s: invalid reader state", __func__);
	return -EINVAL;
	}

	/* Turn the reader off */
	SET_UNIPERIF_CTRL_OPERATION_OFF(reader);

	/* Disable interrupts */
	SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader));

	/* Update state to stopped and return */
	reader->state = UNIPERIF_STATE_STOPPED;

	return 0;
	}

	static int uni_reader_trigger(struct snd_pcm_substream *substream,
	int cmd, struct snd_soc_dai *dai)
	{
	struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
	struct uniperif *reader = priv->dai_data.uni;

	switch (cmd) {
	case SNDRV_PCM_TRIGGER_START:
	return uni_reader_start(reader);
	case SNDRV_PCM_TRIGGER_STOP:
	return uni_reader_stop(reader);
	default:
	return -EINVAL;
	}
	}

	static void uni_reader_shutdown(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
	{
	struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
	struct uniperif *reader = priv->dai_data.uni;

	if (reader->state != UNIPERIF_STATE_STOPPED) {
	/* Stop the reader */
	uni_reader_stop(reader);
	}
	}

	static int uni_reader_parse_dt(struct platform_device *pdev,
	struct uniperif *reader)
	{
	struct uniperif_info *info;
	struct device_node *node = pdev->dev.of_node;

	/* Allocate memory for the info structure */
	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
	if (!info)
	return -ENOMEM;

	if (of_property_read_u32(node, "version", &reader->ver) \|\|
	reader->ver == SND_ST_UNIPERIF_VERSION_UNKNOWN) {
	dev_err(&pdev->dev, "Unknown uniperipheral version ");
	return -EINVAL;
	}

	/* Save the info structure */
	reader->info = info;

	return 0;
	}

	static const struct snd_soc_dai_ops uni_reader_dai_ops = {
	.shutdown = uni_reader_shutdown,
	.prepare = uni_reader_prepare,
	.trigger = uni_reader_trigger,
	.hw_params = sti_uniperiph_dai_hw_params,
	.set_fmt = sti_uniperiph_dai_set_fmt,
	};

	int uni_reader_init(struct platform_device *pdev,
	struct uniperif *reader)
	{
	int ret = 0;

	reader->dev = &pdev->dev;
	reader->state = UNIPERIF_STATE_STOPPED;
	reader->hw = &uni_reader_pcm_hw;
	reader->dai_ops = &uni_reader_dai_ops;

	dev_err(reader->dev, "%s: enter\n", __func__);
	ret = uni_reader_parse_dt(pdev, reader);
	if (ret < 0) {
	dev_err(reader->dev, "Failed to parse DeviceTree");
	return ret;
	}

	ret = devm_request_irq(&pdev->dev, reader->irq,
	uni_reader_irq_handler, IRQF_SHARED,
	dev_name(&pdev->dev), reader);
	if (ret < 0) {
	dev_err(&pdev->dev, "Failed to request IRQ");
	return -EBUSY;
	}

	return 0;
	}
	EXPORT_SYMBOL_GPL(uni_reader_init);