| /* |
| * Copyright (C) 2013 STMicroelectronics (R&D) Limited. |
| * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * publishhed by the Free Software Foundation. |
| */ |
| #include "st-pincfg.h" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| / { |
| |
| aliases { |
| gpio0 = &pio0; |
| gpio1 = &pio1; |
| gpio2 = &pio2; |
| gpio3 = &pio3; |
| gpio4 = &pio4; |
| gpio5 = &pio5; |
| gpio6 = &pio6; |
| gpio7 = &pio7; |
| gpio8 = &pio8; |
| gpio9 = &pio9; |
| gpio10 = &pio10; |
| gpio11 = &pio11; |
| gpio12 = &pio12; |
| gpio13 = &pio13; |
| gpio14 = &pio14; |
| gpio15 = &pio15; |
| gpio16 = &pio16; |
| gpio17 = &pio17; |
| gpio18 = &pio18; |
| gpio19 = &pio100; |
| gpio20 = &pio101; |
| gpio21 = &pio102; |
| gpio22 = &pio103; |
| gpio23 = &pio104; |
| gpio24 = &pio105; |
| gpio25 = &pio106; |
| gpio26 = &pio107; |
| }; |
| |
| soc { |
| pin-controller-sbc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,stih415-sbc-pinctrl"; |
| st,syscfg = <&syscfg_sbc>; |
| reg = <0xfe61f080 0x4>; |
| reg-names = "irqmux"; |
| interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "irqmux"; |
| ranges = <0 0xfe610000 0x5000>; |
| |
| pio0: gpio@fe610000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0 0x100>; |
| st,bank-name = "PIO0"; |
| }; |
| pio1: gpio@fe611000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x1000 0x100>; |
| st,bank-name = "PIO1"; |
| }; |
| pio2: gpio@fe612000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x2000 0x100>; |
| st,bank-name = "PIO2"; |
| }; |
| pio3: gpio@fe613000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x3000 0x100>; |
| st,bank-name = "PIO3"; |
| }; |
| pio4: gpio@fe614000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x4000 0x100>; |
| st,bank-name = "PIO4"; |
| }; |
| |
| sbc_serial1 { |
| pinctrl_sbc_serial1:sbc_serial1 { |
| st,pins { |
| tx = <&pio2 6 ALT3 OUT>; |
| rx = <&pio2 7 ALT3 IN>; |
| }; |
| }; |
| }; |
| |
| keyscan { |
| pinctrl_keyscan: keyscan { |
| st,pins { |
| keyin0 = <&pio0 2 ALT2 IN>; |
| keyin1 = <&pio0 3 ALT2 IN>; |
| keyin2 = <&pio0 4 ALT2 IN>; |
| keyin3 = <&pio2 6 ALT2 IN>; |
| |
| keyout0 = <&pio1 6 ALT2 OUT>; |
| keyout1 = <&pio1 7 ALT2 OUT>; |
| keyout2 = <&pio0 6 ALT2 OUT>; |
| keyout3 = <&pio2 7 ALT2 OUT>; |
| }; |
| }; |
| }; |
| |
| sbc_i2c0 { |
| pinctrl_sbc_i2c0_default: sbc_i2c0-default { |
| st,pins { |
| sda = <&pio4 6 ALT1 BIDIR>; |
| scl = <&pio4 5 ALT1 BIDIR>; |
| }; |
| }; |
| }; |
| |
| sbc_i2c1 { |
| pinctrl_sbc_i2c1_default: sbc_i2c1-default { |
| st,pins { |
| sda = <&pio3 2 ALT2 BIDIR>; |
| scl = <&pio3 1 ALT2 BIDIR>; |
| }; |
| }; |
| }; |
| |
| rc{ |
| pinctrl_ir: ir0 { |
| st,pins { |
| ir = <&pio4 0 ALT2 IN>; |
| }; |
| }; |
| }; |
| |
| gmac1 { |
| pinctrl_mii1: mii1 { |
| st,pins { |
| txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; |
| txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; |
| txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; |
| txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; |
| txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; |
| txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; |
| txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; |
| col = <&pio0 7 ALT1 IN BYPASS 1000>; |
| mdio = <&pio1 0 ALT1 OUT BYPASS 0>; |
| mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; |
| crs = <&pio1 2 ALT1 IN BYPASS 1000>; |
| mdint = <&pio1 3 ALT1 IN BYPASS 0>; |
| rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; |
| rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; |
| rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; |
| rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; |
| rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; |
| rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; |
| rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; |
| phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>; |
| }; |
| }; |
| |
| pinctrl_rgmii1: rgmii1-0 { |
| st,pins { |
| txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>; |
| txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>; |
| txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>; |
| txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>; |
| txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; |
| txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; |
| mdio = <&pio1 0 ALT1 OUT BYPASS 0>; |
| mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; |
| rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; |
| rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; |
| rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; |
| rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; |
| |
| rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; |
| rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; |
| phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; |
| |
| clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; |
| }; |
| }; |
| }; |
| }; |
| |
| pin-controller-front { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,stih415-front-pinctrl"; |
| st,syscfg = <&syscfg_front>; |
| reg = <0xfee0f080 0x4>; |
| reg-names = "irqmux"; |
| interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "irqmux"; |
| ranges = <0 0xfee00000 0x8000>; |
| |
| pio5: gpio@fee00000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0 0x100>; |
| st,bank-name = "PIO5"; |
| }; |
| pio6: gpio@fee01000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x1000 0x100>; |
| st,bank-name = "PIO6"; |
| }; |
| pio7: gpio@fee02000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x2000 0x100>; |
| st,bank-name = "PIO7"; |
| }; |
| pio8: gpio@fee03000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x3000 0x100>; |
| st,bank-name = "PIO8"; |
| }; |
| pio9: gpio@fee04000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x4000 0x100>; |
| st,bank-name = "PIO9"; |
| }; |
| pio10: gpio@fee05000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x5000 0x100>; |
| st,bank-name = "PIO10"; |
| }; |
| pio11: gpio@fee06000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x6000 0x100>; |
| st,bank-name = "PIO11"; |
| }; |
| pio12: gpio@fee07000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x7000 0x100>; |
| st,bank-name = "PIO12"; |
| }; |
| |
| i2c0 { |
| pinctrl_i2c0_default: i2c0-default { |
| st,pins { |
| sda = <&pio9 3 ALT1 BIDIR>; |
| scl = <&pio9 2 ALT1 BIDIR>; |
| }; |
| }; |
| }; |
| |
| i2c1 { |
| pinctrl_i2c1_default: i2c1-default { |
| st,pins { |
| sda = <&pio12 1 ALT1 BIDIR>; |
| scl = <&pio12 0 ALT1 BIDIR>; |
| }; |
| }; |
| }; |
| }; |
| |
| pin-controller-rear { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,stih415-rear-pinctrl"; |
| st,syscfg = <&syscfg_rear>; |
| reg = <0xfe82f080 0x4>; |
| reg-names = "irqmux"; |
| interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "irqmux"; |
| ranges = <0 0xfe820000 0x8000>; |
| |
| pio13: gpio@fe820000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0 0x100>; |
| st,bank-name = "PIO13"; |
| }; |
| pio14: gpio@fe821000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x1000 0x100>; |
| st,bank-name = "PIO14"; |
| }; |
| pio15: gpio@fe822000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x2000 0x100>; |
| st,bank-name = "PIO15"; |
| }; |
| pio16: gpio@fe823000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x3000 0x100>; |
| st,bank-name = "PIO16"; |
| }; |
| pio17: gpio@fe824000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x4000 0x100>; |
| st,bank-name = "PIO17"; |
| }; |
| pio18: gpio@fe825000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x5000 0x100>; |
| st,bank-name = "PIO18"; |
| }; |
| |
| serial2 { |
| pinctrl_serial2: serial2-0 { |
| st,pins { |
| tx = <&pio17 4 ALT2 OUT>; |
| rx = <&pio17 5 ALT2 IN>; |
| }; |
| }; |
| }; |
| |
| gmac0{ |
| pinctrl_mii0: mii0 { |
| st,pins { |
| mdint = <&pio13 6 ALT2 IN BYPASS 0>; |
| txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; |
| |
| txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; |
| txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; |
| txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; |
| txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; |
| |
| txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; |
| txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; |
| crs = <&pio15 2 ALT2 IN BYPASS 1000>; |
| col = <&pio15 3 ALT2 IN BYPASS 1000>; |
| mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; |
| mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; |
| |
| rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; |
| rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; |
| rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; |
| rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; |
| rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; |
| rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; |
| rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; |
| phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>; |
| |
| }; |
| }; |
| |
| pinctrl_gmii0: gmii0 { |
| st,pins { |
| mdint = <&pio13 6 ALT2 IN BYPASS 0>; |
| mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; |
| mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; |
| txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; |
| |
| txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; |
| txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; |
| txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; |
| txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; |
| txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; |
| txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; |
| txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; |
| txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; |
| |
| txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; |
| txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; |
| crs = <&pio15 2 ALT2 IN BYPASS 1000>; |
| col = <&pio15 3 ALT2 IN BYPASS 1000>; |
| rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| |
| rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; |
| |
| rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; |
| clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>; |
| phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; |
| |
| |
| }; |
| }; |
| }; |
| |
| mmc0 { |
| pinctrl_mmc0: mmc0 { |
| st,pins { |
| mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; |
| data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; |
| data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; |
| data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; |
| data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; |
| cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; |
| wp = <&pio15 3 ALT4 IN>; |
| data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; |
| data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; |
| data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; |
| data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; |
| pwr = <&pio17 1 ALT4 OUT>; |
| cd = <&pio17 2 ALT4 IN>; |
| led = <&pio17 3 ALT4 OUT>; |
| }; |
| }; |
| }; |
| }; |
| |
| pin-controller-left { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,stih415-left-pinctrl"; |
| st,syscfg = <&syscfg_left>; |
| reg = <0xfd6bf080 0x4>; |
| reg-names = "irqmux"; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "irqmux"; |
| ranges = <0 0xfd6b0000 0x3000>; |
| |
| pio100: gpio@fd6b0000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0 0x100>; |
| st,bank-name = "PIO100"; |
| }; |
| pio101: gpio@fd6b1000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x1000 0x100>; |
| st,bank-name = "PIO101"; |
| }; |
| pio102: gpio@fd6b2000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x2000 0x100>; |
| st,bank-name = "PIO102"; |
| }; |
| }; |
| |
| pin-controller-right { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,stih415-right-pinctrl"; |
| st,syscfg = <&syscfg_right>; |
| reg = <0xfd33f080 0x4>; |
| reg-names = "irqmux"; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "irqmux"; |
| ranges = <0 0xfd330000 0x5000>; |
| |
| pio103: gpio@fd330000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0 0x100>; |
| st,bank-name = "PIO103"; |
| }; |
| pio104: gpio@fd331000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x1000 0x100>; |
| st,bank-name = "PIO104"; |
| }; |
| pio105: gpio@fd332000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x2000 0x100>; |
| st,bank-name = "PIO105"; |
| }; |
| pio106: gpio@fd333000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x3000 0x100>; |
| st,bank-name = "PIO106"; |
| }; |
| pio107: gpio@fd334000 { |
| gpio-controller; |
| #gpio-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x4000 0x100>; |
| st,bank-name = "PIO107"; |
| }; |
| }; |
| }; |
| }; |
