blob: 39c3900aab3cea107a0771b6fe0d5dc510ac4c11 [file] [log] [blame]
/*
* Copyright © 2006 Keith Packard
* Copyright © 2007-2008 Dave Airlie
* Copyright © 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef __DRM_CRTC_H__
#define __DRM_CRTC_H__
#include <linux/i2c.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/fb.h>
#include <linux/hdmi.h>
#include <linux/media-bus-format.h>
#include <uapi/drm/drm_mode.h>
#include <uapi/drm/drm_fourcc.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_rect.h>
#include <drm/drm_mode_object.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_modes.h>
#include <drm/drm_connector.h>
#include <drm/drm_property.h>
#include <drm/drm_bridge.h>
#include <drm/drm_edid.h>
#include <drm/drm_plane.h>
#include <drm/drm_blend.h>
#include <drm/drm_color_mgmt.h>
#include <drm/drm_debugfs_crc.h>
#include <drm/drm_mode_config.h>
struct drm_device;
struct drm_mode_set;
struct drm_file;
struct drm_clip_rect;
struct drm_printer;
struct device_node;
struct dma_fence;
struct edid;
static inline int64_t U642I64(uint64_t val)
{
return (int64_t)*((int64_t *)&val);
}
static inline uint64_t I642U64(int64_t val)
{
return (uint64_t)*((uint64_t *)&val);
}
struct drm_crtc;
struct drm_pending_vblank_event;
struct drm_plane;
struct drm_bridge;
struct drm_atomic_state;
struct drm_crtc_helper_funcs;
struct drm_plane_helper_funcs;
/**
* struct drm_crtc_state - mutable CRTC state
*
* Note that the distinction between @enable and @active is rather subtile:
* Flipping @active while @enable is set without changing anything else may
* never return in a failure from the &drm_mode_config_funcs.atomic_check
* callback. Userspace assumes that a DPMS On will always succeed. In other
* words: @enable controls resource assignment, @active controls the actual
* hardware state.
*
* The three booleans active_changed, connectors_changed and mode_changed are
* intended to indicate whether a full modeset is needed, rather than strictly
* describing what has changed in a commit. See also:
* drm_atomic_crtc_needs_modeset()
*
* WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or
* drm_helper_crtc_mode_set_base()) do not maintain many of the derived control
* state like @plane_mask so drivers not converted over to atomic helpers should
* not rely on these being accurate!
*/
struct drm_crtc_state {
/** @crtc: backpointer to the CRTC */
struct drm_crtc *crtc;
/**
* @enable: Whether the CRTC should be enabled, gates all other state.
* This controls reservations of shared resources. Actual hardware state
* is controlled by @active.
*/
bool enable;
/**
* @active: Whether the CRTC is actively displaying (used for DPMS).
* Implies that @enable is set. The driver must not release any shared
* resources if @active is set to false but @enable still true, because
* userspace expects that a DPMS ON always succeeds.
*
* Hence drivers must not consult @active in their various
* &drm_mode_config_funcs.atomic_check callback to reject an atomic
* commit. They can consult it to aid in the computation of derived
* hardware state, since even in the DPMS OFF state the display hardware
* should be as much powered down as when the CRTC is completely
* disabled through setting @enable to false.
*/
bool active;
/**
* @planes_changed: Planes on this crtc are updated. Used by the atomic
* helpers and drivers to steer the atomic commit control flow.
*/
bool planes_changed : 1;
/**
* @mode_changed: @mode or @enable has been changed. Used by the atomic
* helpers and drivers to steer the atomic commit control flow. See also
* drm_atomic_crtc_needs_modeset().
*
* Drivers are supposed to set this for any CRTC state changes that
* require a full modeset. They can also reset it to false if e.g. a
* @mode change can be done without a full modeset by only changing
* scaler settings.
*/
bool mode_changed : 1;
/**
* @active_changed: @active has been toggled. Used by the atomic
* helpers and drivers to steer the atomic commit control flow. See also
* drm_atomic_crtc_needs_modeset().
*/
bool active_changed : 1;
/**
* @connectors_changed: Connectors to this crtc have been updated,
* either in their state or routing. Used by the atomic
* helpers and drivers to steer the atomic commit control flow. See also
* drm_atomic_crtc_needs_modeset().
*
* Drivers are supposed to set this as-needed from their own atomic
* check code, e.g. from &drm_encoder_helper_funcs.atomic_check
*/
bool connectors_changed : 1;
/**
* @zpos_changed: zpos values of planes on this crtc have been updated.
* Used by the atomic helpers and drivers to steer the atomic commit
* control flow.
*/
bool zpos_changed : 1;
/**
* @color_mgmt_changed: Color management properties have changed
* (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and
* drivers to steer the atomic commit control flow.
*/
bool color_mgmt_changed : 1;
/**
* @no_vblank:
*
* Reflects the ability of a CRTC to send VBLANK events. This state
* usually depends on the pipeline configuration, and the main usuage
* is CRTCs feeding a writeback connector operating in oneshot mode.
* In this case the VBLANK event is only generated when a job is queued
* to the writeback connector, and we want the core to fake VBLANK
* events when this part of the pipeline hasn't changed but others had
* or when the CRTC and connectors are being disabled.
*
* __drm_atomic_helper_crtc_duplicate_state() will not reset the value
* from the current state, the CRTC driver is then responsible for
* updating this field when needed.
*
* Note that the combination of &drm_crtc_state.event == NULL and
* &drm_crtc_state.no_blank == true is valid and usually used when the
* writeback connector attached to the CRTC has a new job queued. In
* this case the driver will send the VBLANK event on its own when the
* writeback job is complete.
*/
bool no_vblank : 1;
/**
* @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to
* this CRTC.
*/
u32 plane_mask;
/**
* @connector_mask: Bitmask of drm_connector_mask(connector) of
* connectors attached to this CRTC.
*/
u32 connector_mask;
/**
* @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders
* attached to this CRTC.
*/
u32 encoder_mask;
/**
* @adjusted_mode:
*
* Internal display timings which can be used by the driver to handle
* differences between the mode requested by userspace in @mode and what
* is actually programmed into the hardware.
*
* For drivers using &drm_bridge, this stores hardware display timings
* used between the CRTC and the first bridge. For other drivers, the
* meaning of the adjusted_mode field is purely driver implementation
* defined information, and will usually be used to store the hardware
* display timings used between the CRTC and encoder blocks.
*/
struct drm_display_mode adjusted_mode;
/**
* @mode:
*
* Display timings requested by userspace. The driver should try to
* match the refresh rate as close as possible (but note that it's
* undefined what exactly is close enough, e.g. some of the HDMI modes
* only differ in less than 1% of the refresh rate). The active width
* and height as observed by userspace for positioning planes must match
* exactly.
*
* For external connectors where the sink isn't fixed (like with a
* built-in panel), this mode here should match the physical mode on the
* wire to the last details (i.e. including sync polarities and
* everything).
*/
struct drm_display_mode mode;
/**
* @mode_blob: &drm_property_blob for @mode, for exposing the mode to
* atomic userspace.
*/
struct drm_property_blob *mode_blob;
/**
* @degamma_lut:
*
* Lookup table for converting framebuffer pixel data before apply the
* color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The
* blob (if not NULL) is an array of &struct drm_color_lut.
*/
struct drm_property_blob *degamma_lut;
/**
* @ctm:
*
* Color transformation matrix. See drm_crtc_enable_color_mgmt(). The
* blob (if not NULL) is a &struct drm_color_ctm.
*/
struct drm_property_blob *ctm;
/**
* @gamma_lut:
*
* Lookup table for converting pixel data after the color conversion
* matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not
* NULL) is an array of &struct drm_color_lut.
*/
struct drm_property_blob *gamma_lut;
/**
* @target_vblank:
*
* Target vertical blank period when a page flip
* should take effect.
*/
u32 target_vblank;
/**
* @pageflip_flags:
*
* DRM_MODE_PAGE_FLIP_* flags, as passed to the page flip ioctl.
* Zero in any other case.
*/
u32 pageflip_flags;
/**
* @vrr_enabled:
*
* Indicates if variable refresh rate should be enabled for the CRTC.
* Support for the requested vrr state will depend on driver and
* hardware capabiltiy - lacking support is not treated as failure.
*/
bool vrr_enabled;
/**
* @event:
*
* Optional pointer to a DRM event to signal upon completion of the
* state update. The driver must send out the event when the atomic
* commit operation completes. There are two cases:
*
* - The event is for a CRTC which is being disabled through this
* atomic commit. In that case the event can be send out any time
* after the hardware has stopped scanning out the current
* framebuffers. It should contain the timestamp and counter for the
* last vblank before the display pipeline was shut off. The simplest
* way to achieve that is calling drm_crtc_send_vblank_event()
* somewhen after drm_crtc_vblank_off() has been called.
*
* - For a CRTC which is enabled at the end of the commit (even when it
* undergoes an full modeset) the vblank timestamp and counter must
* be for the vblank right before the first frame that scans out the
* new set of buffers. Again the event can only be sent out after the
* hardware has stopped scanning out the old buffers.
*
* - Events for disabled CRTCs are not allowed, and drivers can ignore
* that case.
*
* This can be handled by the drm_crtc_send_vblank_event() function,
* which the driver should call on the provided event upon completion of
* the atomic commit. Note that if the driver supports vblank signalling
* and timestamping the vblank counters and timestamps must agree with
* the ones returned from page flip events. With the current vblank
* helper infrastructure this can be achieved by holding a vblank
* reference while the page flip is pending, acquired through
* drm_crtc_vblank_get() and released with drm_crtc_vblank_put().
* Drivers are free to implement their own vblank counter and timestamp
* tracking though, e.g. if they have accurate timestamp registers in
* hardware.
*
* For hardware which supports some means to synchronize vblank
* interrupt delivery with committing display state there's also
* drm_crtc_arm_vblank_event(). See the documentation of that function
* for a detailed discussion of the constraints it needs to be used
* safely.
*
* If the device can't notify of flip completion in a race-free way
* at all, then the event should be armed just after the page flip is
* committed. In the worst case the driver will send the event to
* userspace one frame too late. This doesn't allow for a real atomic
* update, but it should avoid tearing.
*/
struct drm_pending_vblank_event *event;
/**
* @commit:
*
* This tracks how the commit for this update proceeds through the
* various phases. This is never cleared, except when we destroy the
* state, so that subsequent commits can synchronize with previous ones.
*/
struct drm_crtc_commit *commit;
/** @state: backpointer to global drm_atomic_state */
struct drm_atomic_state *state;
};
/**
* struct drm_crtc_funcs - control CRTCs for a given device
*
* The drm_crtc_funcs structure is the central CRTC management structure
* in the DRM. Each CRTC controls one or more connectors (note that the name
* CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
* connectors, not just CRTs).
*
* Each driver is responsible for filling out this structure at startup time,
* in addition to providing other modesetting features, like i2c and DDC
* bus accessors.
*/
struct drm_crtc_funcs {
/**
* @reset:
*
* Reset CRTC hardware and software state to off. This function isn't
* called by the core directly, only through drm_mode_config_reset().
* It's not a helper hook only for historical reasons.
*
* Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
* atomic state using this hook.
*/
void (*reset)(struct drm_crtc *crtc);
/**
* @cursor_set:
*
* Update the cursor image. The cursor position is relative to the CRTC
* and can be partially or fully outside of the visible area.
*
* Note that contrary to all other KMS functions the legacy cursor entry
* points don't take a framebuffer object, but instead take directly a
* raw buffer object id from the driver's buffer manager (which is
* either GEM or TTM for current drivers).
*
* This entry point is deprecated, drivers should instead implement
* universal plane support and register a proper cursor plane using
* drm_crtc_init_with_planes().
*
* This callback is optional
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height);
/**
* @cursor_set2:
*
* Update the cursor image, including hotspot information. The hotspot
* must not affect the cursor position in CRTC coordinates, but is only
* meant as a hint for virtualized display hardware to coordinate the
* guests and hosts cursor position. The cursor hotspot is relative to
* the cursor image. Otherwise this works exactly like @cursor_set.
*
* This entry point is deprecated, drivers should instead implement
* universal plane support and register a proper cursor plane using
* drm_crtc_init_with_planes().
*
* This callback is optional.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height,
int32_t hot_x, int32_t hot_y);
/**
* @cursor_move:
*
* Update the cursor position. The cursor does not need to be visible
* when this hook is called.
*
* This entry point is deprecated, drivers should instead implement
* universal plane support and register a proper cursor plane using
* drm_crtc_init_with_planes().
*
* This callback is optional.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
/**
* @gamma_set:
*
* Set gamma on the CRTC.
*
* This callback is optional.
*
* Atomic drivers who want to support gamma tables should implement the
* atomic color management support, enabled by calling
* drm_crtc_enable_color_mgmt(), which then supports the legacy gamma
* interface through the drm_atomic_helper_legacy_gamma_set()
* compatibility implementation.
*/
int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
uint32_t size,
struct drm_modeset_acquire_ctx *ctx);
/**
* @destroy:
*
* Clean up plane resources. This is only called at driver unload time
* through drm_mode_config_cleanup() since a CRTC cannot be hotplugged
* in DRM.
*/
void (*destroy)(struct drm_crtc *crtc);
/**
* @set_config:
*
* This is the main legacy entry point to change the modeset state on a
* CRTC. All the details of the desired configuration are passed in a
* &struct drm_mode_set - see there for details.
*
* Drivers implementing atomic modeset should use
* drm_atomic_helper_set_config() to implement this hook.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*set_config)(struct drm_mode_set *set,
struct drm_modeset_acquire_ctx *ctx);
/**
* @page_flip:
*
* Legacy entry point to schedule a flip to the given framebuffer.
*
* Page flipping is a synchronization mechanism that replaces the frame
* buffer being scanned out by the CRTC with a new frame buffer during
* vertical blanking, avoiding tearing (except when requested otherwise
* through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
* requests a page flip the DRM core verifies that the new frame buffer
* is large enough to be scanned out by the CRTC in the currently
* configured mode and then calls this hook with a pointer to the new
* frame buffer.
*
* The driver must wait for any pending rendering to the new framebuffer
* to complete before executing the flip. It should also wait for any
* pending rendering from other drivers if the underlying buffer is a
* shared dma-buf.
*
* An application can request to be notified when the page flip has
* completed. The drm core will supply a &struct drm_event in the event
* parameter in this case. This can be handled by the
* drm_crtc_send_vblank_event() function, which the driver should call on
* the provided event upon completion of the flip. Note that if
* the driver supports vblank signalling and timestamping the vblank
* counters and timestamps must agree with the ones returned from page
* flip events. With the current vblank helper infrastructure this can
* be achieved by holding a vblank reference while the page flip is
* pending, acquired through drm_crtc_vblank_get() and released with
* drm_crtc_vblank_put(). Drivers are free to implement their own vblank
* counter and timestamp tracking though, e.g. if they have accurate
* timestamp registers in hardware.
*
* This callback is optional.
*
* NOTE:
*
* Very early versions of the KMS ABI mandated that the driver must
* block (but not reject) any rendering to the old framebuffer until the
* flip operation has completed and the old framebuffer is no longer
* visible. This requirement has been lifted, and userspace is instead
* expected to request delivery of an event and wait with recycling old
* buffers until such has been received.
*
* RETURNS:
*
* 0 on success or a negative error code on failure. Note that if a
* page flip operation is already pending the callback should return
* -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
* or just runtime disabled through DPMS respectively the new atomic
* "ACTIVE" state) should result in an -EINVAL error code. Note that
* drm_atomic_helper_page_flip() checks this already for atomic drivers.
*/
int (*page_flip)(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags,
struct drm_modeset_acquire_ctx *ctx);
/**
* @page_flip_target:
*
* Same as @page_flip but with an additional parameter specifying the
* absolute target vertical blank period (as reported by
* drm_crtc_vblank_count()) when the flip should take effect.
*
* Note that the core code calls drm_crtc_vblank_get before this entry
* point, and will call drm_crtc_vblank_put if this entry point returns
* any non-0 error code. It's the driver's responsibility to call
* drm_crtc_vblank_put after this entry point returns 0, typically when
* the flip completes.
*/
int (*page_flip_target)(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags, uint32_t target,
struct drm_modeset_acquire_ctx *ctx);
/**
* @set_property:
*
* This is the legacy entry point to update a property attached to the
* CRTC.
*
* This callback is optional if the driver does not support any legacy
* driver-private properties. For atomic drivers it is not used because
* property handling is done entirely in the DRM core.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*set_property)(struct drm_crtc *crtc,
struct drm_property *property, uint64_t val);
/**
* @atomic_duplicate_state:
*
* Duplicate the current atomic state for this CRTC and return it.
* The core and helpers guarantee that any atomic state duplicated with
* this hook and still owned by the caller (i.e. not transferred to the
* driver by calling &drm_mode_config_funcs.atomic_commit) will be
* cleaned up by calling the @atomic_destroy_state hook in this
* structure.
*
* This callback is mandatory for atomic drivers.
*
* Atomic drivers which don't subclass &struct drm_crtc_state should use
* drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
* state structure to extend it with driver-private state should use
* __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
* duplicated in a consistent fashion across drivers.
*
* It is an error to call this hook before &drm_crtc.state has been
* initialized correctly.
*
* NOTE:
*
* If the duplicate state references refcounted resources this hook must
* acquire a reference for each of them. The driver must release these
* references again in @atomic_destroy_state.
*
* RETURNS:
*
* Duplicated atomic state or NULL when the allocation failed.
*/
struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
/**
* @atomic_destroy_state:
*
* Destroy a state duplicated with @atomic_duplicate_state and release
* or unreference all resources it references
*
* This callback is mandatory for atomic drivers.
*/
void (*atomic_destroy_state)(struct drm_crtc *crtc,
struct drm_crtc_state *state);
/**
* @atomic_set_property:
*
* Decode a driver-private property value and store the decoded value
* into the passed-in state structure. Since the atomic core decodes all
* standardized properties (even for extensions beyond the core set of
* properties which might not be implemented by all drivers) this
* requires drivers to subclass the state structure.
*
* Such driver-private properties should really only be implemented for
* truly hardware/vendor specific state. Instead it is preferred to
* standardize atomic extension and decode the properties used to expose
* such an extension in the core.
*
* Do not call this function directly, use
* drm_atomic_crtc_set_property() instead.
*
* This callback is optional if the driver does not support any
* driver-private atomic properties.
*
* NOTE:
*
* This function is called in the state assembly phase of atomic
* modesets, which can be aborted for any reason (including on
* userspace's request to just check whether a configuration would be
* possible). Drivers MUST NOT touch any persistent state (hardware or
* software) or data structures except the passed in @state parameter.
*
* Also since userspace controls in which order properties are set this
* function must not do any input validation (since the state update is
* incomplete and hence likely inconsistent). Instead any such input
* validation must be done in the various atomic_check callbacks.
*
* RETURNS:
*
* 0 if the property has been found, -EINVAL if the property isn't
* implemented by the driver (which should never happen, the core only
* asks for properties attached to this CRTC). No other validation is
* allowed by the driver. The core already checks that the property
* value is within the range (integer, valid enum value, ...) the driver
* set when registering the property.
*/
int (*atomic_set_property)(struct drm_crtc *crtc,
struct drm_crtc_state *state,
struct drm_property *property,
uint64_t val);
/**
* @atomic_get_property:
*
* Reads out the decoded driver-private property. This is used to
* implement the GETCRTC IOCTL.
*
* Do not call this function directly, use
* drm_atomic_crtc_get_property() instead.
*
* This callback is optional if the driver does not support any
* driver-private atomic properties.
*
* RETURNS:
*
* 0 on success, -EINVAL if the property isn't implemented by the
* driver (which should never happen, the core only asks for
* properties attached to this CRTC).
*/
int (*atomic_get_property)(struct drm_crtc *crtc,
const struct drm_crtc_state *state,
struct drm_property *property,
uint64_t *val);
/**
* @late_register:
*
* This optional hook can be used to register additional userspace
* interfaces attached to the crtc like debugfs interfaces.
* It is called late in the driver load sequence from drm_dev_register().
* Everything added from this callback should be unregistered in
* the early_unregister callback.
*
* Returns:
*
* 0 on success, or a negative error code on failure.
*/
int (*late_register)(struct drm_crtc *crtc);
/**
* @early_unregister:
*
* This optional hook should be used to unregister the additional
* userspace interfaces attached to the crtc from
* @late_register. It is called from drm_dev_unregister(),
* early in the driver unload sequence to disable userspace access
* before data structures are torndown.
*/
void (*early_unregister)(struct drm_crtc *crtc);
/**
* @set_crc_source:
*
* Changes the source of CRC checksums of frames at the request of
* userspace, typically for testing purposes. The sources available are
* specific of each driver and a %NULL value indicates that CRC
* generation is to be switched off.
*
* When CRC generation is enabled, the driver should call
* drm_crtc_add_crc_entry() at each frame, providing any information
* that characterizes the frame contents in the crcN arguments, as
* provided from the configured source. Drivers must accept an "auto"
* source name that will select a default source for this CRTC.
*
* Note that "auto" can depend upon the current modeset configuration,
* e.g. it could pick an encoder or output specific CRC sampling point.
*
* This callback is optional if the driver does not support any CRC
* generation functionality.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*set_crc_source)(struct drm_crtc *crtc, const char *source);
/**
* @verify_crc_source:
*
* verifies the source of CRC checksums of frames before setting the
* source for CRC and during crc open. Source parameter can be NULL
* while disabling crc source.
*
* This callback is optional if the driver does not support any CRC
* generation functionality.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*verify_crc_source)(struct drm_crtc *crtc, const char *source,
size_t *values_cnt);
/**
* @get_crc_sources:
*
* Driver callback for getting a list of all the available sources for
* CRC generation. This callback depends upon verify_crc_source, So
* verify_crc_source callback should be implemented before implementing
* this. Driver can pass full list of available crc sources, this
* callback does the verification on each crc-source before passing it
* to userspace.
*
* This callback is optional if the driver does not support exporting of
* possible CRC sources list.
*
* RETURNS:
*
* a constant character pointer to the list of all the available CRC
* sources. On failure driver should return NULL. count should be
* updated with number of sources in list. if zero we don't process any
* source from the list.
*/
const char *const *(*get_crc_sources)(struct drm_crtc *crtc,
size_t *count);
/**
* @atomic_print_state:
*
* If driver subclasses &struct drm_crtc_state, it should implement
* this optional hook for printing additional driver specific state.
*
* Do not call this directly, use drm_atomic_crtc_print_state()
* instead.
*/
void (*atomic_print_state)(struct drm_printer *p,
const struct drm_crtc_state *state);
/**
* @get_vblank_counter:
*
* Driver callback for fetching a raw hardware vblank counter for the
* CRTC. It's meant to be used by new drivers as the replacement of
* &drm_driver.get_vblank_counter hook.
*
* This callback is optional. If a device doesn't have a hardware
* counter, the driver can simply leave the hook as NULL. The DRM core
* will account for missed vblank events while interrupts where disabled
* based on system timestamps.
*
* Wraparound handling and loss of events due to modesetting is dealt
* with in the DRM core code, as long as drivers call
* drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or
* enabling a CRTC.
*
* See also &drm_device.vblank_disable_immediate and
* &drm_device.max_vblank_count.
*
* Returns:
*
* Raw vblank counter value.
*/
u32 (*get_vblank_counter)(struct drm_crtc *crtc);
/**
* @enable_vblank:
*
* Enable vblank interrupts for the CRTC. It's meant to be used by
* new drivers as the replacement of &drm_driver.enable_vblank hook.
*
* Returns:
*
* Zero on success, appropriate errno if the vblank interrupt cannot
* be enabled.
*/
int (*enable_vblank)(struct drm_crtc *crtc);
/**
* @disable_vblank:
*
* Disable vblank interrupts for the CRTC. It's meant to be used by
* new drivers as the replacement of &drm_driver.disable_vblank hook.
*/
void (*disable_vblank)(struct drm_crtc *crtc);
};
/**
* struct drm_crtc - central CRTC control structure
*
* Each CRTC may have one or more connectors associated with it. This structure
* allows the CRTC to be controlled.
*/
struct drm_crtc {
/** @dev: parent DRM device */
struct drm_device *dev;
/** @port: OF node used by drm_of_find_possible_crtcs(). */
struct device_node *port;
/**
* @head:
*
* List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list.
* Invariant over the lifetime of @dev and therefore does not need
* locking.
*/
struct list_head head;
/** @name: human readable name, can be overwritten by the driver */
char *name;
/**
* @mutex:
*
* This provides a read lock for the overall CRTC state (mode, dpms
* state, ...) and a write lock for everything which can be update
* without a full modeset (fb, cursor data, CRTC properties ...). A full
* modeset also need to grab &drm_mode_config.connection_mutex.
*
* For atomic drivers specifically this protects @state.
*/
struct drm_modeset_lock mutex;
/** @base: base KMS object for ID tracking etc. */
struct drm_mode_object base;
/**
* @primary:
* Primary plane for this CRTC. Note that this is only
* relevant for legacy IOCTL, it specifies the plane implicitly used by
* the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance
* beyond that.
*/
struct drm_plane *primary;
/**
* @cursor:
* Cursor plane for this CRTC. Note that this is only relevant for
* legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR
* and SETCURSOR2 IOCTLs. It does not have any significance
* beyond that.
*/
struct drm_plane *cursor;
/**
* @index: Position inside the mode_config.list, can be used as an array
* index. It is invariant over the lifetime of the CRTC.
*/
unsigned index;
/**
* @cursor_x: Current x position of the cursor, used for universal
* cursor planes because the SETCURSOR IOCTL only can update the
* framebuffer without supplying the coordinates. Drivers should not use
* this directly, atomic drivers should look at &drm_plane_state.crtc_x
* of the cursor plane instead.
*/
int cursor_x;
/**
* @cursor_y: Current y position of the cursor, used for universal
* cursor planes because the SETCURSOR IOCTL only can update the
* framebuffer without supplying the coordinates. Drivers should not use
* this directly, atomic drivers should look at &drm_plane_state.crtc_y
* of the cursor plane instead.
*/
int cursor_y;
/**
* @enabled:
*
* Is this CRTC enabled? Should only be used by legacy drivers, atomic
* drivers should instead consult &drm_crtc_state.enable and
* &drm_crtc_state.active. Atomic drivers can update this by calling
* drm_atomic_helper_update_legacy_modeset_state().
*/
bool enabled;
/**
* @mode:
*
* Current mode timings. Should only be used by legacy drivers, atomic
* drivers should instead consult &drm_crtc_state.mode. Atomic drivers
* can update this by calling
* drm_atomic_helper_update_legacy_modeset_state().
*/
struct drm_display_mode mode;
/**
* @hwmode:
*
* Programmed mode in hw, after adjustments for encoders, crtc, panel
* scaling etc. Should only be used by legacy drivers, for high
* precision vblank timestamps in
* drm_calc_vbltimestamp_from_scanoutpos().
*
* Note that atomic drivers should not use this, but instead use
* &drm_crtc_state.adjusted_mode. And for high-precision timestamps
* drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode,
* which is filled out by calling drm_calc_timestamping_constants().
*/
struct drm_display_mode hwmode;
/**
* @x:
* x position on screen. Should only be used by legacy drivers, atomic
* drivers should look at &drm_plane_state.crtc_x of the primary plane
* instead. Updated by calling
* drm_atomic_helper_update_legacy_modeset_state().
*/
int x;
/**
* @y:
* y position on screen. Should only be used by legacy drivers, atomic
* drivers should look at &drm_plane_state.crtc_y of the primary plane
* instead. Updated by calling
* drm_atomic_helper_update_legacy_modeset_state().
*/
int y;
/** @funcs: CRTC control functions */
const struct drm_crtc_funcs *funcs;
/**
* @gamma_size: Size of legacy gamma ramp reported to userspace. Set up
* by calling drm_mode_crtc_set_gamma_size().
*/
uint32_t gamma_size;
/**
* @gamma_store: Gamma ramp values used by the legacy SETGAMMA and
* GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size().
*/
uint16_t *gamma_store;
/** @helper_private: mid-layer private data */
const struct drm_crtc_helper_funcs *helper_private;
/** @properties: property tracking for this CRTC */
struct drm_object_properties properties;
/**
* @state:
*
* Current atomic state for this CRTC.
*
* This is protected by @mutex. Note that nonblocking atomic commits
* access the current CRTC state without taking locks. Either by going
* through the &struct drm_atomic_state pointers, see
* for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and
* for_each_new_crtc_in_state(). Or through careful ordering of atomic
* commit operations as implemented in the atomic helpers, see
* &struct drm_crtc_commit.
*/
struct drm_crtc_state *state;
/**
* @commit_list:
*
* List of &drm_crtc_commit structures tracking pending commits.
* Protected by @commit_lock. This list holds its own full reference,
* as does the ongoing commit.
*
* "Note that the commit for a state change is also tracked in
* &drm_crtc_state.commit. For accessing the immediately preceding
* commit in an atomic update it is recommended to just use that
* pointer in the old CRTC state, since accessing that doesn't need
* any locking or list-walking. @commit_list should only be used to
* stall for framebuffer cleanup that's signalled through
* &drm_crtc_commit.cleanup_done."
*/
struct list_head commit_list;
/**
* @commit_lock:
*
* Spinlock to protect @commit_list.
*/
spinlock_t commit_lock;
#ifdef CONFIG_DEBUG_FS
/**
* @debugfs_entry:
*
* Debugfs directory for this CRTC.
*/
struct dentry *debugfs_entry;
#endif
/**
* @crc:
*
* Configuration settings of CRC capture.
*/
struct drm_crtc_crc crc;
/**
* @fence_context:
*
* timeline context used for fence operations.
*/
unsigned int fence_context;
/**
* @fence_lock:
*
* spinlock to protect the fences in the fence_context.
*/
spinlock_t fence_lock;
/**
* @fence_seqno:
*
* Seqno variable used as monotonic counter for the fences
* created on the CRTC's timeline.
*/
unsigned long fence_seqno;
/**
* @timeline_name:
*
* The name of the CRTC's fence timeline.
*/
char timeline_name[32];
};
/**
* struct drm_mode_set - new values for a CRTC config change
* @fb: framebuffer to use for new config
* @crtc: CRTC whose configuration we're about to change
* @mode: mode timings to use
* @x: position of this CRTC relative to @fb
* @y: position of this CRTC relative to @fb
* @connectors: array of connectors to drive with this CRTC if possible
* @num_connectors: size of @connectors array
*
* This represents a modeset configuration for the legacy SETCRTC ioctl and is
* also used internally. Atomic drivers instead use &drm_atomic_state.
*/
struct drm_mode_set {
struct drm_framebuffer *fb;
struct drm_crtc *crtc;
struct drm_display_mode *mode;
uint32_t x;
uint32_t y;
struct drm_connector **connectors;
size_t num_connectors;
};
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
__printf(6, 7)
int drm_crtc_init_with_planes(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_plane *primary,
struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs,
const char *name, ...);
void drm_crtc_cleanup(struct drm_crtc *crtc);
/**
* drm_crtc_index - find the index of a registered CRTC
* @crtc: CRTC to find index for
*
* Given a registered CRTC, return the index of that CRTC within a DRM
* device's list of CRTCs.
*/
static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc)
{
return crtc->index;
}
/**
* drm_crtc_mask - find the mask of a registered CRTC
* @crtc: CRTC to find mask for
*
* Given a registered CRTC, return the mask bit of that CRTC for the
* &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields.
*/
static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc)
{
return 1 << drm_crtc_index(crtc);
}
int drm_crtc_force_disable(struct drm_crtc *crtc);
int drm_crtc_force_disable_all(struct drm_device *dev);
int drm_mode_set_config_internal(struct drm_mode_set *set);
struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
/**
* drm_crtc_find - look up a CRTC object from its ID
* @dev: DRM device
* @file_priv: drm file to check for lease against.
* @id: &drm_mode_object ID
*
* This can be used to look up a CRTC from its userspace ID. Only used by
* drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
* userspace interface should be done using &drm_property.
*/
static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
struct drm_file *file_priv,
uint32_t id)
{
struct drm_mode_object *mo;
mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC);
return mo ? obj_to_crtc(mo) : NULL;
}
/**
* drm_for_each_crtc - iterate over all CRTCs
* @crtc: a &struct drm_crtc as the loop cursor
* @dev: the &struct drm_device
*
* Iterate over all CRTCs of @dev.
*/
#define drm_for_each_crtc(crtc, dev) \
list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
#endif /* __DRM_CRTC_H__ */