Merge tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC udpates from Vineet Gupta:

 - updates for various platforms

 - boot log updates for upcoming HS48 family of cores (dual issue)

* tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
  ARC: fix allnoconfig build warning
  ARCv2: boot log: identify HS48 cores (dual issue)
  ARC: boot log: decontaminate ARCv2 ISA_CONFIG register
  arc: remove redundant UTS_MACHINE define in arch/arc/Makefile
  ARC: [plat-eznps] Update platform maintainer as Noam left
  ARC: [plat-hsdk] use actual clk driver to manage cpu clk
  ARC: [*defconfig] Reenable soft lock-up detector
  ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency
  ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency
  ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
diff --git a/MAINTAINERS b/MAINTAINERS
index d537601..2d3d750 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5259,7 +5259,8 @@
 F:	drivers/iommu/exynos-iommu.c
 
 EZchip NPS platform support
-M:	Noam Camus <noamc@ezchip.com>
+M:	Elad Kanfi <eladkan@mellanox.com>
+M:	Vineet Gupta <vgupta@synopsys.com>
 S:	Supported
 F:	arch/arc/plat-eznps
 F:	arch/arc/boot/dts/eznps.dts
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a598641..c84e67f 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -24,7 +24,7 @@
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_FUTEX_CMPXCHG
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 3a4b52b..d37f49d 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -6,8 +6,6 @@
 # published by the Free Software Foundation.
 #
 
-UTS_MACHINE := arc
-
 ifeq ($(CROSS_COMPILE),)
 ifndef CONFIG_CPU_BIG_ENDIAN
 CROSS_COMPILE := arc-linux-
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 2367a67..e114000 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -44,7 +44,14 @@
 
 			mmcclk: mmcclk {
 				compatible = "fixed-clock";
-				clock-frequency = <50000000>;
+				/*
+				 * DW sdio controller has external ciu clock divider
+				 * controlled via register in SDIO IP. It divides
+				 * sdio_ref_clk (which comes from CGU) by 16 for
+				 * default. So default mmcclk clock (which comes
+				 * to sdk_in) is 25000000 Hz.
+				 */
+				clock-frequency = <25000000>;
 				#clock-cells = <0>;
 			};
 
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 229d13a..8adde1b 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
 
 / {
 	model = "snps,hsdk";
@@ -57,10 +58,10 @@
 		};
 	};
 
-	core_clk: core-clk {
+	input_clk: input-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
+		clock-frequency = <33333333>;
 	};
 
 	cpu_intc: cpu-interrupt-controller {
@@ -102,6 +103,19 @@
 
 		ranges = <0x00000000 0xf0000000 0x10000000>;
 
+		cgu_rst: reset-controller@8a0 {
+			compatible = "snps,hsdk-reset";
+			#reset-cells = <1>;
+			reg = <0x8A0 0x4>, <0xFF0 0x4>;
+		};
+
+		core_clk: core-clk@0 {
+			compatible = "snps,hsdk-core-pll-clock";
+			reg = <0x00 0x10>, <0x14B8 0x4>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+		};
+
 		serial: serial@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
@@ -120,7 +134,17 @@
 
 		mmcclk_ciu: mmcclk-ciu {
 			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+			/*
+			 * DW sdio controller has external ciu clock divider
+			 * controlled via register in SDIO IP. Due to its
+			 * unexpected default value (it should devide by 1
+			 * but it devides by 8) SDIO IP uses wrong clock and
+			 * works unstable (see STAR 9001204800)
+			 * So add temporary fix and change clock frequency
+			 * from 100000000 to 12500000 Hz until we fix dw sdio
+			 * driver itself.
+			 */
+			clock-frequency = <12500000>;
 			#clock-cells = <0>;
 		};
 
@@ -141,6 +165,8 @@
 			clocks = <&gmacclk>;
 			clock-names = "stmmaceth";
 			phy-handle = <&phy0>;
+			resets = <&cgu_rst HSDK_ETH_RESET>;
+			reset-names = "stmmaceth";
 
 			mdio {
 				#address-cells = <1>;
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 6980b96..ec7c849 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -105,7 +105,7 @@
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 2233f57..63d3cf6 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -104,7 +104,7 @@
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index 30a3d4c..f613eca 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -107,7 +107,7 @@
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index 821a2e5..3507be2 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -84,5 +84,5 @@
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 9a3fcf4..15f0f6b 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -63,6 +63,7 @@
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_HSDK=y
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -72,7 +73,7 @@
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index c0d6a01..4fcf4f2 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -94,7 +94,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 5c09717..7b71464 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -98,7 +98,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index ba8e802..b1c56d3 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -98,6 +98,7 @@
 
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
+#define AUX_EXEC_CTRL		8
 #define AUX_INTR_VEC_BASE	0x25
 #define AUX_VOL			0x5e
 
@@ -135,12 +136,12 @@
 #endif
 };
 
-struct bcr_isa {
+struct bcr_isa_arcv2 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1,
-		     pad1:11, atomic1:1, ver:8;
+		     pad1:12, ver:8;
 #else
-	unsigned int ver:8, atomic1:1, pad1:11, be:1, atomic:1, unalign:1,
+	unsigned int ver:8, pad1:12, be:1, atomic:1, unalign:1,
 		     ldd:1, pad2:4, div_rem:4;
 #endif
 };
@@ -263,13 +264,13 @@
 	struct cpuinfo_arc_mmu mmu;
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
-	struct bcr_isa isa;
+	struct bcr_isa_arcv2 isa;
 	const char *details, *name;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
-			     fpu_sp:1, fpu_dp:1, pad2:6,
+			     fpu_sp:1, fpu_dp:1, dual_iss_enb:1, dual_iss_exist:1, pad2:4,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 877cec8..fb83844 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -51,6 +51,7 @@
 	{ 0x51, "R2.0" },
 	{ 0x52, "R2.1" },
 	{ 0x53, "R3.0" },
+	{ 0x54, "R4.0" },
 #endif
 	{ 0x00, NULL   }
 };
@@ -62,6 +63,7 @@
 #else
 	{ 0x40, "ARC EM"  },
 	{ 0x50, "ARC HS38"  },
+	{ 0x54, "ARC HS48"  },
 #endif
 	{ 0x00, "Unknown"   }
 };
@@ -119,11 +121,11 @@
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	const struct id_to_str *tbl;
+	struct bcr_isa_arcv2 isa;
 
 	FIX_PTR(cpu);
 
 	READ_BCR(AUX_IDENTITY, cpu->core);
-	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
 	for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
 		if (cpu->core.family == tbl->id) {
@@ -133,7 +135,7 @@
 	}
 
 	for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
-		if ((cpu->core.family & 0xF0) == tbl->id)
+		if ((cpu->core.family & 0xF4) == tbl->id)
 			break;
 	}
 	cpu->name = tbl->str;
@@ -192,6 +194,14 @@
 		cpu->bpu.full = bpu.ft;
 		cpu->bpu.num_cache = 256 << bpu.bce;
 		cpu->bpu.num_pred = 2048 << bpu.pte;
+
+		if (cpu->core.family >= 0x54) {
+			unsigned int exec_ctrl;
+
+			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
+			cpu->extn.dual_iss_exist = 1;
+			cpu->extn.dual_iss_enb = exec_ctrl & 1;
+		}
 	}
 
 	READ_BCR(ARC_REG_AP_BCR, bcr);
@@ -205,18 +215,25 @@
 
 	cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
 
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
+
 	/* some hacks for lack of feature BCR info in old ARC700 cores */
 	if (is_isa_arcompact()) {
-		if (!cpu->isa.ver)	/* ISA BCR absent, use Kconfig info */
+		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
 			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-		else
-			cpu->isa.atomic = cpu->isa.atomic1;
+		else {
+			/* ARC700_BUILD only has 2 bits of isa info */
+			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
+			cpu->isa.atomic = bcr.info & 1;
+		}
 
 		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
 
 		 /* there's no direct way to distinguish 750 vs. 770 */
 		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
 			cpu->name = "ARC750";
+	} else {
+		cpu->isa = isa;
 	}
 }
 
@@ -232,10 +249,11 @@
 		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
 		       core->family, core->cpu_id, core->chip_id);
 
-	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s\n",
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
 		       cpu_id, cpu->name, cpu->details,
 		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
-		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"));
+		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(cpu->extn.dual_iss_exist, cpu->extn.dual_iss_enb, " Dual-Issue"));
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
 		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index f1ac679..cf14ebc 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -111,6 +111,13 @@
 
 	axs10x_enable_gpio_intc_wire();
 
+	/*
+	 * Reset ethernet IP core.
+	 * TODO: get rid of this quirk after axs10x reset driver (or simple
+	 * reset driver) will be available in upstream.
+	 */
+	iowrite32((1 << 5), (void __iomem *) CREG_MB_SW_RESET);
+
 	scnprintf(mb, 32, "MainBoard v%d", mb_rev);
 	axs10x_print_board_ver(CREG_MB_VER, mb);
 }
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 5a6ed5a..bd08de4 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -6,4 +6,5 @@
 #
 
 menuconfig ARC_SOC_HSDK
-       bool "ARC HS Development Kit SOC"
+	bool "ARC HS Development Kit SOC"
+	select CLK_HSDK
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index a2e7fd1..744e62e 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -38,6 +38,42 @@
 #define CREG_PAE		(CREG_BASE + 0x180)
 #define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
 
+#define CREG_CORE_IF_CLK_DIV	(CREG_BASE + 0x4B8)
+#define CREG_CORE_IF_CLK_DIV_2	0x1
+#define CGU_BASE		ARC_PERIPHERAL_BASE
+#define CGU_PLL_STATUS		(ARC_PERIPHERAL_BASE + 0x4)
+#define CGU_PLL_CTRL		(ARC_PERIPHERAL_BASE + 0x0)
+#define CGU_PLL_STATUS_LOCK	BIT(0)
+#define CGU_PLL_STATUS_ERR	BIT(1)
+#define CGU_PLL_CTRL_1GHZ	0x3A10
+#define HSDK_PLL_LOCK_TIMEOUT	500
+
+#define HSDK_PLL_LOCKED() \
+	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
+
+#define HSDK_PLL_ERR() \
+	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
+
+static void __init hsdk_set_cpu_freq_1ghz(void)
+{
+	u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
+
+	/*
+	 * As we set cpu clock which exceeds 500MHz, the divider for the interface
+	 * clock must be programmed to div-by-2.
+	 */
+	iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
+
+	/* Set cpu clock to 1GHz */
+	iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
+
+	while (!HSDK_PLL_LOCKED() && timeout--)
+		cpu_relax();
+
+	if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
+		pr_err("Failed to setup CPU frequency to 1GHz!");
+}
+
 static void __init hsdk_init_early(void)
 {
 	/*
@@ -52,6 +88,12 @@
 
 	/* Really apply settings made above */
 	writel(1, (void __iomem *) CREG_PAE_UPDATE);
+
+	/*
+	 * Setup CPU frequency to 1GHz.
+	 * TODO: remove it after smart hsdk pll driver will be introduced.
+	 */
+	hsdk_set_cpu_freq_1ghz();
 }
 
 static const char *hsdk_compat[] __initconst = {