| /* |
| * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include "dra74x.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include "am57xx-idk-common.dtsi" |
| #include "dra74x-mmc-iodelay.dtsi" |
| |
| / { |
| model = "TI AM5728 IDK"; |
| compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", |
| "ti,dra7"; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x0 0x80000000>; |
| }; |
| |
| status-leds { |
| compatible = "gpio-leds"; |
| cpu0-led { |
| label = "status0:red:cpu0"; |
| gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "cpu0"; |
| }; |
| |
| usr0-led { |
| label = "status0:green:usr"; |
| gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| heartbeat-led { |
| label = "status0:blue:heartbeat"; |
| gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| cpu1-led { |
| label = "status1:red:cpu1"; |
| gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "cpu1"; |
| }; |
| |
| usr1-led { |
| label = "status1:green:usr"; |
| gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| mmc0-led { |
| label = "status1:blue:mmc0"; |
| gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "mmc0"; |
| }; |
| }; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; |
| pinctrl-0 = <&mmc1_pins_default>; |
| pinctrl-1 = <&mmc1_pins_hs>; |
| pinctrl-2 = <&mmc1_pins_sdr12>; |
| pinctrl-3 = <&mmc1_pins_sdr25>; |
| pinctrl-4 = <&mmc1_pins_sdr50>; |
| pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; |
| pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; |
| }; |
| |
| &mmc2 { |
| pinctrl-names = "default", "hs", "ddr_1_8v"; |
| pinctrl-0 = <&mmc2_pins_default>; |
| pinctrl-1 = <&mmc2_pins_hs>; |
| pinctrl-2 = <&mmc2_pins_ddr_rev20>; |
| }; |
| |
| &omap_dwc3_2 { |
| extcon = <&extcon_usb2>; |
| }; |
| |
| &extcon_usb2 { |
| id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; |
| vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &sn65hvs882 { |
| load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pcie1_rc { |
| status = "okay"; |
| gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &pcie1_ep { |
| gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &mailbox5 { |
| status = "okay"; |
| mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { |
| status = "okay"; |
| }; |
| mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { |
| status = "okay"; |
| }; |
| }; |
| |
| &mailbox6 { |
| status = "okay"; |
| mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { |
| status = "okay"; |
| }; |
| mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { |
| status = "okay"; |
| }; |
| }; |
