blob: 05490dd073e6c3f44cc69f77a305da83e7abc818 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000, 2003 Silicon Graphics, Inc. All rights reserved.
* Copyright (c) 2001 Intel Corp.
* Copyright (c) 2001 Tony Luck <tony.luck@intel.com>
* Copyright (c) 2002 NEC Corp.
* Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
* Copyright (c) 2004 Silicon Graphics, Inc
* Russ Anderson <rja@sgi.com>
* Jesse Barnes <jbarnes@sgi.com>
* Jack Steiner <steiner@sgi.com>
*/
/*
* Platform initialization for Discontig Memory
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/nmi.h>
#include <linux/swap.h>
#include <linux/memblock.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/nodemask.h>
#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
#include <asm/meminit.h>
#include <asm/numa.h>
#include <asm/sections.h>
/*
* Track per-node information needed to setup the boot memory allocator, the
* per-node areas, and the real VM.
*/
struct early_node_data {
struct ia64_node_data *node_data;
unsigned long pernode_addr;
unsigned long pernode_size;
unsigned long min_pfn;
unsigned long max_pfn;
};
static struct early_node_data mem_data[MAX_NUMNODES] __initdata;
static nodemask_t memory_less_mask __initdata;
pg_data_t *pgdat_list[MAX_NUMNODES];
/*
* To prevent cache aliasing effects, align per-node structures so that they
* start at addresses that are strided by node number.
*/
#define MAX_NODE_ALIGN_OFFSET (32 * 1024 * 1024)
#define NODEDATA_ALIGN(addr, node) \
((((addr) + 1024*1024-1) & ~(1024*1024-1)) + \
(((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1)))
/**
* build_node_maps - callback to setup mem_data structs for each node
* @start: physical start of range
* @len: length of range
* @node: node where this range resides
*
* Detect extents of each piece of memory that we wish to
* treat as a virtually contiguous block (i.e. each node). Each such block
* must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
* if necessary. Any non-existent pages will simply be part of the virtual
* memmap.
*/
static int __init build_node_maps(unsigned long start, unsigned long len,
int node)
{
unsigned long spfn, epfn, end = start + len;
epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
if (!mem_data[node].min_pfn) {
mem_data[node].min_pfn = spfn;
mem_data[node].max_pfn = epfn;
} else {
mem_data[node].min_pfn = min(spfn, mem_data[node].min_pfn);
mem_data[node].max_pfn = max(epfn, mem_data[node].max_pfn);
}
return 0;
}
/**
* early_nr_cpus_node - return number of cpus on a given node
* @node: node to check
*
* Count the number of cpus on @node. We can't use nr_cpus_node() yet because
* acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
* called yet. Note that node 0 will also count all non-existent cpus.
*/
static int __meminit early_nr_cpus_node(int node)
{
int cpu, n = 0;
for_each_possible_early_cpu(cpu)
if (node == node_cpuid[cpu].nid)
n++;
return n;
}
/**
* compute_pernodesize - compute size of pernode data
* @node: the node id.
*/
static unsigned long __meminit compute_pernodesize(int node)
{
unsigned long pernodesize = 0, cpus;
cpus = early_nr_cpus_node(node);
pernodesize += PERCPU_PAGE_SIZE * cpus;
pernodesize += node * L1_CACHE_BYTES;
pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
pernodesize = PAGE_ALIGN(pernodesize);
return pernodesize;
}
/**
* per_cpu_node_setup - setup per-cpu areas on each node
* @cpu_data: per-cpu area on this node
* @node: node to setup
*
* Copy the static per-cpu data into the region we just set aside and then
* setup __per_cpu_offset for each CPU on this node. Return a pointer to
* the end of the area.
*/
static void *per_cpu_node_setup(void *cpu_data, int node)
{
#ifdef CONFIG_SMP
int cpu;
for_each_possible_early_cpu(cpu) {
void *src = cpu == 0 ? __cpu0_per_cpu : __phys_per_cpu_start;
if (node != node_cpuid[cpu].nid)
continue;
memcpy(__va(cpu_data), src, __per_cpu_end - __per_cpu_start);
__per_cpu_offset[cpu] = (char *)__va(cpu_data) -
__per_cpu_start;
/*
* percpu area for cpu0 is moved from the __init area
* which is setup by head.S and used till this point.
* Update ar.k3. This move is ensures that percpu
* area for cpu0 is on the correct node and its
* virtual address isn't insanely far from other
* percpu areas which is important for congruent
* percpu allocator.
*/
if (cpu == 0)
ia64_set_kr(IA64_KR_PER_CPU_DATA,
(unsigned long)cpu_data -
(unsigned long)__per_cpu_start);
cpu_data += PERCPU_PAGE_SIZE;
}
#endif
return cpu_data;
}
#ifdef CONFIG_SMP
/**
* setup_per_cpu_areas - setup percpu areas
*
* Arch code has already allocated and initialized percpu areas. All
* this function has to do is to teach the determined layout to the
* dynamic percpu allocator, which happens to be more complex than
* creating whole new ones using helpers.
*/
void __init setup_per_cpu_areas(void)
{
struct pcpu_alloc_info *ai;
struct pcpu_group_info *uninitialized_var(gi);
unsigned int *cpu_map;
void *base;
unsigned long base_offset;
unsigned int cpu;
ssize_t static_size, reserved_size, dyn_size;
int node, prev_node, unit, nr_units, rc;
ai = pcpu_alloc_alloc_info(MAX_NUMNODES, nr_cpu_ids);
if (!ai)
panic("failed to allocate pcpu_alloc_info");
cpu_map = ai->groups[0].cpu_map;
/* determine base */
base = (void *)ULONG_MAX;
for_each_possible_cpu(cpu)
base = min(base,
(void *)(__per_cpu_offset[cpu] + __per_cpu_start));
base_offset = (void *)__per_cpu_start - base;
/* build cpu_map, units are grouped by node */
unit = 0;
for_each_node(node)
for_each_possible_cpu(cpu)
if (node == node_cpuid[cpu].nid)
cpu_map[unit++] = cpu;
nr_units = unit;
/* set basic parameters */
static_size = __per_cpu_end - __per_cpu_start;
reserved_size = PERCPU_MODULE_RESERVE;
dyn_size = PERCPU_PAGE_SIZE - static_size - reserved_size;
if (dyn_size < 0)
panic("percpu area overflow static=%zd reserved=%zd\n",
static_size, reserved_size);
ai->static_size = static_size;
ai->reserved_size = reserved_size;
ai->dyn_size = dyn_size;
ai->unit_size = PERCPU_PAGE_SIZE;
ai->atom_size = PAGE_SIZE;
ai->alloc_size = PERCPU_PAGE_SIZE;
/*
* CPUs are put into groups according to node. Walk cpu_map
* and create new groups at node boundaries.
*/
prev_node = NUMA_NO_NODE;
ai->nr_groups = 0;
for (unit = 0; unit < nr_units; unit++) {
cpu = cpu_map[unit];
node = node_cpuid[cpu].nid;
if (node == prev_node) {
gi->nr_units++;
continue;
}
prev_node = node;
gi = &ai->groups[ai->nr_groups++];
gi->nr_units = 1;
gi->base_offset = __per_cpu_offset[cpu] + base_offset;
gi->cpu_map = &cpu_map[unit];
}
rc = pcpu_setup_first_chunk(ai, base);
if (rc)
panic("failed to setup percpu area (err=%d)", rc);
pcpu_free_alloc_info(ai);
}
#endif
/**
* fill_pernode - initialize pernode data.
* @node: the node id.
* @pernode: physical address of pernode data
* @pernodesize: size of the pernode data
*/
static void __init fill_pernode(int node, unsigned long pernode,
unsigned long pernodesize)
{
void *cpu_data;
int cpus = early_nr_cpus_node(node);
mem_data[node].pernode_addr = pernode;
mem_data[node].pernode_size = pernodesize;
memset(__va(pernode), 0, pernodesize);
cpu_data = (void *)pernode;
pernode += PERCPU_PAGE_SIZE * cpus;
pernode += node * L1_CACHE_BYTES;
pgdat_list[node] = __va(pernode);
pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
mem_data[node].node_data = __va(pernode);
pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
cpu_data = per_cpu_node_setup(cpu_data, node);
return;
}
/**
* find_pernode_space - allocate memory for memory map and per-node structures
* @start: physical start of range
* @len: length of range
* @node: node where this range resides
*
* This routine reserves space for the per-cpu data struct, the list of
* pg_data_ts and the per-node data struct. Each node will have something like
* the following in the first chunk of addr. space large enough to hold it.
*
* ________________________
* | |
* |~~~~~~~~~~~~~~~~~~~~~~~~| <-- NODEDATA_ALIGN(start, node) for the first
* | PERCPU_PAGE_SIZE * | start and length big enough
* | cpus_on_this_node | Node 0 will also have entries for all non-existent cpus.
* |------------------------|
* | local pg_data_t * |
* |------------------------|
* | local ia64_node_data |
* |------------------------|
* | ??? |
* |________________________|
*
* Once this space has been set aside, the bootmem maps are initialized. We
* could probably move the allocation of the per-cpu and ia64_node_data space
* outside of this function and use alloc_bootmem_node(), but doing it here
* is straightforward and we get the alignments we want so...
*/
static int __init find_pernode_space(unsigned long start, unsigned long len,
int node)
{
unsigned long spfn, epfn;
unsigned long pernodesize = 0, pernode;
spfn = start >> PAGE_SHIFT;
epfn = (start + len) >> PAGE_SHIFT;
/*
* Make sure this memory falls within this node's usable memory
* since we may have thrown some away in build_maps().
*/
if (spfn < mem_data[node].min_pfn || epfn > mem_data[node].max_pfn)
return 0;
/* Don't setup this node's local space twice... */
if (mem_data[node].pernode_addr)
return 0;
/*
* Calculate total size needed, incl. what's necessary
* for good alignment and alias prevention.
*/
pernodesize = compute_pernodesize(node);
pernode = NODEDATA_ALIGN(start, node);
/* Is this range big enough for what we want to store here? */
if (start + len > (pernode + pernodesize))
fill_pernode(node, pernode, pernodesize);
return 0;
}
/**
* reserve_pernode_space - reserve memory for per-node space
*
* Reserve the space used by the bootmem maps & per-node space in the boot
* allocator so that when we actually create the real mem maps we don't
* use their memory.
*/
static void __init reserve_pernode_space(void)
{
unsigned long base, size;
int node;
for_each_online_node(node) {
if (node_isset(node, memory_less_mask))
continue;
/* Now the per-node space */
size = mem_data[node].pernode_size;
base = __pa(mem_data[node].pernode_addr);
memblock_reserve(base, size);
}
}
static void __meminit scatter_node_data(void)
{
pg_data_t **dst;
int node;
/*
* for_each_online_node() can't be used at here.
* node_online_map is not set for hot-added nodes at this time,
* because we are halfway through initialization of the new node's
* structures. If for_each_online_node() is used, a new node's
* pg_data_ptrs will be not initialized. Instead of using it,
* pgdat_list[] is checked.
*/
for_each_node(node) {
if (pgdat_list[node]) {
dst = LOCAL_DATA_ADDR(pgdat_list[node])->pg_data_ptrs;
memcpy(dst, pgdat_list, sizeof(pgdat_list));
}
}
}
/**
* initialize_pernode_data - fixup per-cpu & per-node pointers
*
* Each node's per-node area has a copy of the global pg_data_t list, so
* we copy that to each node here, as well as setting the per-cpu pointer
* to the local node data structure. The active_cpus field of the per-node
* structure gets setup by the platform_cpu_init() function later.
*/
static void __init initialize_pernode_data(void)
{
int cpu, node;
scatter_node_data();
#ifdef CONFIG_SMP
/* Set the node_data pointer for each per-cpu struct */
for_each_possible_early_cpu(cpu) {
node = node_cpuid[cpu].nid;
per_cpu(ia64_cpu_info, cpu).node_data =
mem_data[node].node_data;
}
#else
{
struct cpuinfo_ia64 *cpu0_cpu_info;
cpu = 0;
node = node_cpuid[cpu].nid;
cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
((char *)&ia64_cpu_info - __per_cpu_start));
cpu0_cpu_info->node_data = mem_data[node].node_data;
}
#endif /* CONFIG_SMP */
}
/**
* memory_less_node_alloc - * attempt to allocate memory on the best NUMA slit
* node but fall back to any other node when __alloc_bootmem_node fails
* for best.
* @nid: node id
* @pernodesize: size of this node's pernode data
*/
static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize)
{
void *ptr = NULL;
u8 best = 0xff;
int bestnode = NUMA_NO_NODE, node, anynode = 0;
for_each_online_node(node) {
if (node_isset(node, memory_less_mask))
continue;
else if (node_distance(nid, node) < best) {
best = node_distance(nid, node);
bestnode = node;
}
anynode = node;
}
if (bestnode == NUMA_NO_NODE)
bestnode = anynode;
ptr = memblock_alloc_try_nid(pernodesize, PERCPU_PAGE_SIZE,
__pa(MAX_DMA_ADDRESS),
MEMBLOCK_ALLOC_ACCESSIBLE,
bestnode);
if (!ptr)
panic("%s: Failed to allocate %lu bytes align=0x%lx nid=%d from=%lx\n",
__func__, pernodesize, PERCPU_PAGE_SIZE, bestnode,
__pa(MAX_DMA_ADDRESS));
return ptr;
}
/**
* memory_less_nodes - allocate and initialize CPU only nodes pernode
* information.
*/
static void __init memory_less_nodes(void)
{
unsigned long pernodesize;
void *pernode;
int node;
for_each_node_mask(node, memory_less_mask) {
pernodesize = compute_pernodesize(node);
pernode = memory_less_node_alloc(node, pernodesize);
fill_pernode(node, __pa(pernode), pernodesize);
}
return;
}
/**
* find_memory - walk the EFI memory map and setup the bootmem allocator
*
* Called early in boot to setup the bootmem allocator, and to
* allocate the per-cpu and per-node structures.
*/
void __init find_memory(void)
{
int node;
reserve_memory();
efi_memmap_walk(filter_memory, register_active_ranges);
if (num_online_nodes() == 0) {
printk(KERN_ERR "node info missing!\n");
node_set_online(0);
}
nodes_or(memory_less_mask, memory_less_mask, node_online_map);
min_low_pfn = -1;
max_low_pfn = 0;
/* These actually end up getting called by call_pernode_memory() */
efi_memmap_walk(filter_rsvd_memory, build_node_maps);
efi_memmap_walk(filter_rsvd_memory, find_pernode_space);
efi_memmap_walk(find_max_min_low_pfn, NULL);
for_each_online_node(node)
if (mem_data[node].min_pfn)
node_clear(node, memory_less_mask);
reserve_pernode_space();
memory_less_nodes();
initialize_pernode_data();
max_pfn = max_low_pfn;
find_initrd();
}
#ifdef CONFIG_SMP
/**
* per_cpu_init - setup per-cpu variables
*
* find_pernode_space() does most of this already, we just need to set
* local_per_cpu_offset
*/
void *per_cpu_init(void)
{
int cpu;
static int first_time = 1;
if (first_time) {
first_time = 0;
for_each_possible_early_cpu(cpu)
per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
}
return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
}
#endif /* CONFIG_SMP */
/**
* call_pernode_memory - use SRAT to call callback functions with node info
* @start: physical start of range
* @len: length of range
* @arg: function to call for each range
*
* efi_memmap_walk() knows nothing about layout of memory across nodes. Find
* out to which node a block of memory belongs. Ignore memory that we cannot
* identify, and split blocks that run across multiple nodes.
*
* Take this opportunity to round the start address up and the end address
* down to page boundaries.
*/
void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
{
unsigned long rs, re, end = start + len;
void (*func)(unsigned long, unsigned long, int);
int i;
start = PAGE_ALIGN(start);
end &= PAGE_MASK;
if (start >= end)
return;
func = arg;
if (!num_node_memblks) {
/* No SRAT table, so assume one node (node 0) */
if (start < end)
(*func)(start, end - start, 0);
return;
}
for (i = 0; i < num_node_memblks; i++) {
rs = max(start, node_memblk[i].start_paddr);
re = min(end, node_memblk[i].start_paddr +
node_memblk[i].size);
if (rs < re)
(*func)(rs, re - rs, node_memblk[i].nid);
if (re == end)
break;
}
}
/**
* paging_init - setup page tables
*
* paging_init() sets up the page tables for each node of the system and frees
* the bootmem allocator memory for general use.
*/
void __init paging_init(void)
{
unsigned long max_dma;
unsigned long pfn_offset = 0;
unsigned long max_pfn = 0;
int node;
unsigned long max_zone_pfns[MAX_NR_ZONES];
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
#ifdef CONFIG_VIRTUAL_MEM_MAP
VMALLOC_END -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) *
sizeof(struct page));
vmem_map = (struct page *) VMALLOC_END;
efi_memmap_walk(create_mem_map_page_table, NULL);
printk("Virtual mem_map starts at 0x%p\n", vmem_map);
#endif
for_each_online_node(node) {
pfn_offset = mem_data[node].min_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
#endif
if (mem_data[node].max_pfn > max_pfn)
max_pfn = mem_data[node].max_pfn;
}
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_ZONE_DMA32
max_zone_pfns[ZONE_DMA32] = max_dma;
#endif
max_zone_pfns[ZONE_NORMAL] = max_pfn;
free_area_init_nodes(max_zone_pfns);
zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
}
#ifdef CONFIG_MEMORY_HOTPLUG
pg_data_t *arch_alloc_nodedata(int nid)
{
unsigned long size = compute_pernodesize(nid);
return kzalloc(size, GFP_KERNEL);
}
void arch_free_nodedata(pg_data_t *pgdat)
{
kfree(pgdat);
}
void arch_refresh_nodedata(int update_node, pg_data_t *update_pgdat)
{
pgdat_list[update_node] = update_pgdat;
scatter_node_data();
}
#endif
#ifdef CONFIG_SPARSEMEM_VMEMMAP
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
return vmemmap_populate_basepages(start, end, node);
}
void vmemmap_free(unsigned long start, unsigned long end,
struct vmem_altmap *altmap)
{
}
#endif