blob: 85b27c42cf65ba8c21c105a129391d8322cc00f0 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
config ARCH_HAS_RESET_CONTROLLER
bool
menuconfig RESET_CONTROLLER
bool "Reset Controller Support"
default y if ARCH_HAS_RESET_CONTROLLER
help
Generic Reset Controller support.
This framework is designed to abstract reset handling of devices
via GPIOs or SoC-internal reset controller modules.
If unsure, say no.
if RESET_CONTROLLER
config RESET_A10SR
tristate "Altera Arria10 System Resource Reset"
depends on MFD_ALTERA_A10SR || COMPILE_TEST
help
This option enables support for the external reset functions for
peripheral PHYs on the Altera Arria10 System Resource Chip.
config RESET_ATH79
bool "AR71xx Reset Driver" if COMPILE_TEST
default ATH79
help
This enables the ATH79 reset controller driver that supports the
AR71xx SoC reset controller.
config RESET_AXS10X
bool "AXS10x Reset Driver" if COMPILE_TEST
default ARC_PLAT_AXS10X
help
This enables the reset controller driver for AXS10x.
config RESET_BCM6345
bool "BCM6345 Reset Controller"
depends on BMIPS_GENERIC || COMPILE_TEST
default BMIPS_GENERIC
help
This enables the reset controller driver for BCM6345 SoCs.
config RESET_BERLIN
tristate "Berlin Reset Driver"
depends on ARCH_BERLIN || COMPILE_TEST
default m if ARCH_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
config RESET_BRCMSTB
tristate "Broadcom STB reset controller"
depends on ARCH_BRCMSTB || COMPILE_TEST
default ARCH_BRCMSTB
help
This enables the reset controller driver for Broadcom STB SoCs using
a SUN_TOP_CTRL_SW_INIT style controller.
config RESET_BRCMSTB_RESCAL
tristate "Broadcom STB RESCAL reset controller"
depends on HAS_IOMEM
depends on ARCH_BRCMSTB || COMPILE_TEST
default ARCH_BRCMSTB
help
This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
BCM7216.
config RESET_GPIO
tristate "GPIO reset controller"
help
This enables a generic reset controller for resets attached via
GPIOs. Typically for OF platforms this driver expects "reset-gpios"
property.
If compiled as module, it will be called reset-gpio.
config RESET_HSDK
bool "Synopsys HSDK Reset Driver"
depends on HAS_IOMEM
depends on ARC_SOC_HSDK || COMPILE_TEST
help
This enables the reset controller driver for HSDK board.
config RESET_IMX7
tristate "i.MX7/8 Reset Driver"
depends on HAS_IOMEM
depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
default y if SOC_IMX7D
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
config RESET_INTEL_GW
bool "Intel Reset Controller Driver"
depends on X86 || COMPILE_TEST
depends on OF && HAS_IOMEM
select REGMAP_MMIO
help
This enables the reset controller driver for Intel Gateway SoCs.
Say Y to control the reset signals provided by reset controller.
Otherwise, say N.
config RESET_K210
bool "Reset controller driver for Canaan Kendryte K210 SoC"
depends on (SOC_CANAAN || COMPILE_TEST) && OF
select MFD_SYSCON
default SOC_CANAAN
help
Support for the Canaan Kendryte K210 RISC-V SoC reset controller.
Say Y if you want to control reset signals provided by this
controller.
config RESET_LANTIQ
bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
default SOC_TYPE_XWAY
help
This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
config RESET_LPC18XX
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
default ARCH_LPC18XX
help
This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
config RESET_MCHP_SPARX5
bool "Microchip Sparx5 reset driver"
depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST
default y if SPARX5_SWITCH
select MFD_SYSCON
help
This driver supports switch core reset for the Microchip Sparx5 SoC.
config RESET_MESON
tristate "Meson Reset Driver"
depends on ARCH_MESON || COMPILE_TEST
default ARCH_MESON
help
This enables the reset driver for Amlogic Meson SoCs.
config RESET_MESON_AUDIO_ARB
tristate "Meson Audio Memory Arbiter Reset Driver"
depends on ARCH_MESON || COMPILE_TEST
help
This enables the reset driver for Audio Memory Arbiter of
Amlogic's A113 based SoCs
config RESET_NPCM
bool "NPCM BMC Reset Driver" if COMPILE_TEST
default ARCH_NPCM
help
This enables the reset controller driver for Nuvoton NPCM
BMC SoCs.
config RESET_NUVOTON_MA35D1
bool "Nuvoton MA35D1 Reset Driver"
depends on ARCH_MA35 || COMPILE_TEST
default ARCH_MA35
help
This enables the reset controller driver for Nuvoton MA35D1 SoC.
config RESET_PISTACHIO
bool "Pistachio Reset Driver"
depends on MIPS || COMPILE_TEST
help
This enables the reset driver for ImgTec Pistachio SoCs.
config RESET_POLARFIRE_SOC
bool "Microchip PolarFire SoC (MPFS) Reset Driver"
depends on MCHP_CLK_MPFS
select AUXILIARY_BUS
default MCHP_CLK_MPFS
help
This driver supports peripheral reset for the Microchip PolarFire SoC
config RESET_QCOM_AOSS
tristate "Qcom AOSS Reset Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the AOSS (always on subsystem) reset driver
for Qualcomm SDM845 SoCs. Say Y if you want to control
reset signals provided by AOSS for Modem, Venus, ADSP,
GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
config RESET_QCOM_PDC
tristate "Qualcomm PDC Reset Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the PDC (Power Domain Controller) reset driver
for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
to control reset signals provided by PDC for Modem, Compute,
Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
config RESET_RASPBERRYPI
tristate "Raspberry Pi 4 Firmware Reset Driver"
depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
default USB_XHCI_PCI
help
Raspberry Pi 4's co-processor controls some of the board's HW
initialization process, but it's up to Linux to trigger it when
relevant. This driver provides a reset controller capable of
interfacing with RPi4's co-processor and model these firmware
initialization routines as reset lines.
config RESET_RZG2L_USBPHY_CTRL
tristate "Renesas RZ/G2L USBPHY control driver"
depends on ARCH_RZG2L || COMPILE_TEST
help
Support for USBPHY Control found on RZ/G2L family. It mainly
controls reset and power down of the USB/PHY.
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
default ARM_SCMI_PROTOCOL
help
This driver provides support for reset signal/domains that are
controlled by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware controlling all the reset signals.
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_SOPHGO || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
depends on HAS_IOMEM
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
exclusive register space.
Currently this driver supports:
- Altera SoCFPGAs
- ASPEED BMC SoCs
- Bitmain BM1880 SoC
- Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- SiFive FU740 SoCs
- Sophgo SoCs
config RESET_SOCFPGA
bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
default ARM && ARCH_INTEL_SOCFPGA
select RESET_SIMPLE
help
This enables the reset driver for the SoCFPGA ARMv7 platforms. This
driver gets initialized early during platform init calls.
config RESET_SUNPLUS
bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
default ARCH_SUNPLUS
help
This enables the reset driver support for Sunplus SoCs.
The reset lines that can be asserted and deasserted by toggling bits
in a contiguous, exclusive register space. The register is HIWORD_MASKED,
which means each register holds 16 reset lines.
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
select RESET_SIMPLE
help
This enables the reset driver for Allwinner SoCs.
config RESET_TI_SCI
tristate "TI System Control Interface (TI-SCI) reset driver"
depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
help
This enables the reset driver support over TI System Control Interface
available on some new TI's SoCs. If you wish to use reset resources
managed by the TI System Controller, say Y here. Otherwise, say N.
config RESET_TI_SYSCON
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
select MFD_SYSCON
help
This enables the reset driver support for TI devices with
memory-mapped reset registers as part of a syscon device node. If
you wish to use the reset framework for such memory-mapped devices,
say Y here. Otherwise, say N.
config RESET_TI_TPS380X
tristate "TI TPS380x Reset Driver"
select GPIOLIB
help
This enables the reset driver support for TI TPS380x devices. If
you wish to use the reset framework for such devices, say Y here.
Otherwise, say N.
config RESET_TN48M_CPLD
tristate "Delta Networks TN48M switch CPLD reset controller"
depends on MFD_TN48M_CPLD || COMPILE_TEST
default MFD_TN48M_CPLD
help
This enables the reset controller driver for the Delta TN48M CPLD.
It provides reset signals for Armada 7040 and 385 SoC-s, Alleycat 3X
switch MAC-s, Alaska OOB ethernet PHY, Quad Alaska ethernet PHY-s and
Microchip PD69200 PoE PSE controller.
This driver can also be built as a module. If so, the module will be
called reset-tn48m.
config RESET_UNIPHIER
tristate "Reset controller driver for UniPhier SoCs"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on OF && MFD_SYSCON
default ARCH_UNIPHIER
help
Support for reset controllers on UniPhier SoCs.
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
config RESET_UNIPHIER_GLUE
tristate "Reset driver in glue layer for UniPhier SoCs"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default ARCH_UNIPHIER
select RESET_SIMPLE
help
Support for peripheral core reset included in its own glue layer
on UniPhier SoCs. Say Y if you want to control reset signals
provided by the glue layer.
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
default ARCH_ZYNQ
help
This enables the reset controller driver for Xilinx Zynq SoCs.
source "drivers/reset/starfive/Kconfig"
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
source "drivers/reset/tegra/Kconfig"
endif