| /* $NetBSD: bpf.c,v 1.6 1995/11/14 08:41:42 thorpej Exp $ */ |
| |
| /* |
| * Copyright (c) 1988, 1992 The University of Utah and the Center |
| * for Software Science (CSS). |
| * Copyright (c) 1992, 1993 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * This code is derived from software contributed to Berkeley by |
| * the Center for Software Science of the University of Utah Computer |
| * Science Department. CSS requests users of this software to return |
| * to css-dist@cs.utah.edu any improvements that they make and grant |
| * CSS redistribution rights. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * This product includes software developed by the University of |
| * California, Berkeley and its contributors. |
| * 4. Neither the name of the University nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * from: @(#)bpf.c 8.1 (Berkeley) 6/4/93 |
| * |
| * From: Utah Hdr: bpf.c 3.1 92/07/06 |
| * Author: Jeff Forys, University of Utah CSS |
| */ |
| |
| #ifndef lint |
| /*static char sccsid[] = "@(#)bpf.c 8.1 (Berkeley) 6/4/93";*/ |
| static char rcsid[] = "$NetBSD: bpf.c,v 1.6 1995/11/14 08:41:42 thorpej Exp $"; |
| #endif /* not lint */ |
| |
| #include <sys/param.h> |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| |
| #include <net/if.h> |
| #include <net/bpf.h> |
| |
| #include <ctype.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <syslog.h> |
| #include <unistd.h> |
| #include "defs.h" |
| #include "pathnames.h" |
| |
| static int BpfFd = -1; |
| static unsigned BpfLen = 0; |
| static u_int8_t *BpfPkt = NULL; |
| |
| /* |
| ** BpfOpen -- Open and initialize a BPF device. |
| ** |
| ** Parameters: |
| ** None. |
| ** |
| ** Returns: |
| ** File descriptor of opened BPF device (for select() etc). |
| ** |
| ** Side Effects: |
| ** If an error is encountered, the program terminates here. |
| */ |
| int |
| BpfOpen() |
| { |
| struct ifreq ifr; |
| char bpfdev[32]; |
| int n = 0; |
| |
| /* |
| * Open the first available BPF device. |
| */ |
| do { |
| (void) sprintf(bpfdev, _PATH_BPF, n++); |
| BpfFd = open(bpfdev, O_RDWR); |
| } while (BpfFd < 0 && (errno == EBUSY || errno == EPERM)); |
| |
| if (BpfFd < 0) { |
| syslog(LOG_ERR, "bpf: no available devices: %m"); |
| Exit(0); |
| } |
| |
| /* |
| * Set interface name for bpf device, get data link layer |
| * type and make sure it's type Ethernet. |
| */ |
| (void) strncpy(ifr.ifr_name, IntfName, sizeof(ifr.ifr_name)); |
| if (ioctl(BpfFd, BIOCSETIF, (caddr_t)&ifr) < 0) { |
| syslog(LOG_ERR, "bpf: ioctl(BIOCSETIF,%s): %m", IntfName); |
| Exit(0); |
| } |
| |
| /* |
| * Make sure we are dealing with an Ethernet device. |
| */ |
| if (ioctl(BpfFd, BIOCGDLT, (caddr_t)&n) < 0) { |
| syslog(LOG_ERR, "bpf: ioctl(BIOCGDLT): %m"); |
| Exit(0); |
| } |
| if (n != DLT_EN10MB) { |
| syslog(LOG_ERR,"bpf: %s: data-link type %d unsupported", |
| IntfName, n); |
| Exit(0); |
| } |
| |
| /* |
| * On read(), return packets immediately (do not buffer them). |
| */ |
| n = 1; |
| if (ioctl(BpfFd, BIOCIMMEDIATE, (caddr_t)&n) < 0) { |
| syslog(LOG_ERR, "bpf: ioctl(BIOCIMMEDIATE): %m"); |
| Exit(0); |
| } |
| |
| /* |
| * Try to enable the chip/driver's multicast address filter to |
| * grab our RMP address. If this fails, try promiscuous mode. |
| * If this fails, there's no way we are going to get any RMP |
| * packets so just exit here. |
| */ |
| #ifdef MSG_EOR |
| ifr.ifr_addr.sa_len = RMP_ADDRLEN + 2; |
| #endif |
| ifr.ifr_addr.sa_family = AF_UNSPEC; |
| bcopy(&RmpMcastAddr[0], (char *)&ifr.ifr_addr.sa_data[0], RMP_ADDRLEN); |
| if (ioctl(BpfFd, SIOCADDMULTI, (caddr_t)&ifr) < 0) { |
| syslog(LOG_WARNING, |
| "bpf: can't add mcast addr (%m), setting promiscuous mode"); |
| |
| if (ioctl(BpfFd, BIOCPROMISC, (caddr_t)0) < 0) { |
| syslog(LOG_ERR, "bpf: can't set promiscuous mode: %m"); |
| Exit(0); |
| } |
| } |
| |
| /* |
| * Ask BPF how much buffer space it requires and allocate one. |
| */ |
| if (ioctl(BpfFd, BIOCGBLEN, (caddr_t)&BpfLen) < 0) { |
| syslog(LOG_ERR, "bpf: ioctl(BIOCGBLEN): %m"); |
| Exit(0); |
| } |
| if (BpfPkt == NULL) |
| BpfPkt = (u_int8_t *)malloc(BpfLen); |
| |
| if (BpfPkt == NULL) { |
| syslog(LOG_ERR, "bpf: out of memory (%u bytes for bpfpkt)", |
| BpfLen); |
| Exit(0); |
| } |
| |
| /* |
| * Write a little program to snarf RMP Boot packets and stuff |
| * it down BPF's throat (i.e. set up the packet filter). |
| */ |
| { |
| #define RMP ((struct rmp_packet *)0) |
| static struct bpf_insn bpf_insn[] = { |
| { BPF_LD|BPF_B|BPF_ABS, 0, 0, (long)&RMP->hp_llc.dsap }, |
| { BPF_JMP|BPF_JEQ|BPF_K, 0, 5, IEEE_DSAP_HP }, |
| { BPF_LD|BPF_H|BPF_ABS, 0, 0, (long)&RMP->hp_llc.cntrl }, |
| { BPF_JMP|BPF_JEQ|BPF_K, 0, 3, IEEE_CNTL_HP }, |
| { BPF_LD|BPF_H|BPF_ABS, 0, 0, (long)&RMP->hp_llc.dxsap }, |
| { BPF_JMP|BPF_JEQ|BPF_K, 0, 1, HPEXT_DXSAP }, |
| { BPF_RET|BPF_K, 0, 0, RMP_MAX_PACKET }, |
| { BPF_RET|BPF_K, 0, 0, 0x0 } |
| }; |
| #undef RMP |
| static struct bpf_program bpf_pgm = { |
| sizeof(bpf_insn)/sizeof(bpf_insn[0]), bpf_insn |
| }; |
| |
| if (ioctl(BpfFd, BIOCSETF, (caddr_t)&bpf_pgm) < 0) { |
| syslog(LOG_ERR, "bpf: ioctl(BIOCSETF): %m"); |
| Exit(0); |
| } |
| } |
| |
| return(BpfFd); |
| } |
| |
| /* |
| ** BPF GetIntfName -- Return the name of a network interface attached to |
| ** the system, or 0 if none can be found. The interface |
| ** must be configured up; the lowest unit number is |
| ** preferred; loopback is ignored. |
| ** |
| ** Parameters: |
| ** errmsg - if no network interface found, *errmsg explains why. |
| ** |
| ** Returns: |
| ** A (static) pointer to interface name, or NULL on error. |
| ** |
| ** Side Effects: |
| ** None. |
| */ |
| char * |
| BpfGetIntfName(errmsg) |
| char **errmsg; |
| { |
| struct ifreq ibuf[8], *ifrp, *ifend, *mp; |
| struct ifconf ifc; |
| int fd; |
| int minunit, n; |
| char *cp; |
| static char device[sizeof(ifrp->ifr_name)]; |
| static char errbuf[128] = "No Error!"; |
| |
| if (errmsg != NULL) |
| *errmsg = errbuf; |
| |
| if ((fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { |
| (void) strcpy(errbuf, "bpf: socket: %m"); |
| return(NULL); |
| } |
| ifc.ifc_len = sizeof ibuf; |
| ifc.ifc_buf = (caddr_t)ibuf; |
| |
| #ifdef OSIOCGIFCONF |
| if (ioctl(fd, OSIOCGIFCONF, (char *)&ifc) < 0 || |
| ifc.ifc_len < sizeof(struct ifreq)) { |
| (void) strcpy(errbuf, "bpf: ioctl(OSIOCGIFCONF): %m"); |
| return(NULL); |
| } |
| #else |
| if (ioctl(fd, SIOCGIFCONF, (char *)&ifc) < 0 || |
| ifc.ifc_len < sizeof(struct ifreq)) { |
| (void) strcpy(errbuf, "bpf: ioctl(SIOCGIFCONF): %m"); |
| return(NULL); |
| } |
| #endif |
| ifrp = ibuf; |
| ifend = (struct ifreq *)((char *)ibuf + ifc.ifc_len); |
| |
| mp = 0; |
| minunit = 666; |
| for (; ifrp < ifend; ++ifrp) { |
| if (ioctl(fd, SIOCGIFFLAGS, (char *)ifrp) < 0) { |
| (void) strcpy(errbuf, "bpf: ioctl(SIOCGIFFLAGS): %m"); |
| return(NULL); |
| } |
| |
| /* |
| * If interface is down or this is the loopback interface, |
| * ignore it. |
| */ |
| if ((ifrp->ifr_flags & IFF_UP) == 0 || |
| #ifdef IFF_LOOPBACK |
| (ifrp->ifr_flags & IFF_LOOPBACK)) |
| #else |
| (strcmp(ifrp->ifr_name, "lo0") == 0)) |
| #endif |
| continue; |
| |
| for (cp = ifrp->ifr_name; !isdigit(*cp); ++cp) |
| ; |
| n = atoi(cp); |
| if (n < minunit) { |
| minunit = n; |
| mp = ifrp; |
| } |
| } |
| |
| (void) close(fd); |
| if (mp == 0) { |
| (void) strcpy(errbuf, "bpf: no interfaces found"); |
| return(NULL); |
| } |
| |
| (void) strcpy(device, mp->ifr_name); |
| return(device); |
| } |
| |
| /* |
| ** BpfRead -- Read packets from a BPF device and fill in `rconn'. |
| ** |
| ** Parameters: |
| ** rconn - filled in with next packet. |
| ** doread - is True if we can issue a read() syscall. |
| ** |
| ** Returns: |
| ** True if `rconn' contains a new packet, False otherwise. |
| ** |
| ** Side Effects: |
| ** None. |
| */ |
| int |
| BpfRead(rconn, doread) |
| RMPCONN *rconn; |
| int doread; |
| { |
| register int datlen, caplen, hdrlen; |
| static u_int8_t *bp = NULL, *ep = NULL; |
| int cc; |
| |
| /* |
| * The read() may block, or it may return one or more packets. |
| * We let the caller decide whether or not we can issue a read(). |
| */ |
| if (doread) { |
| if ((cc = read(BpfFd, (char *)BpfPkt, (int)BpfLen)) < 0) { |
| syslog(LOG_ERR, "bpf: read: %m"); |
| return(0); |
| } else { |
| bp = BpfPkt; |
| ep = BpfPkt + cc; |
| } |
| } |
| |
| #define bhp ((struct bpf_hdr *)bp) |
| /* |
| * If there is a new packet in the buffer, stuff it into `rconn' |
| * and return a success indication. |
| */ |
| if (bp < ep) { |
| datlen = bhp->bh_datalen; |
| caplen = bhp->bh_caplen; |
| hdrlen = bhp->bh_hdrlen; |
| |
| if (caplen != datlen) |
| syslog(LOG_ERR, |
| "bpf: short packet dropped (%d of %d bytes)", |
| caplen, datlen); |
| else if (caplen > sizeof(struct rmp_packet)) |
| syslog(LOG_ERR, "bpf: large packet dropped (%d bytes)", |
| caplen); |
| else { |
| rconn->rmplen = caplen; |
| bcopy((char *)&bhp->bh_tstamp, (char *)&rconn->tstamp, |
| sizeof(struct timeval)); |
| bcopy((char *)bp + hdrlen, (char *)&rconn->rmp, caplen); |
| } |
| bp += BPF_WORDALIGN(caplen + hdrlen); |
| return(1); |
| } |
| #undef bhp |
| |
| return(0); |
| } |
| |
| /* |
| ** BpfWrite -- Write packet to BPF device. |
| ** |
| ** Parameters: |
| ** rconn - packet to send. |
| ** |
| ** Returns: |
| ** True if write succeeded, False otherwise. |
| ** |
| ** Side Effects: |
| ** None. |
| */ |
| int |
| BpfWrite(rconn) |
| RMPCONN *rconn; |
| { |
| if (write(BpfFd, (char *)&rconn->rmp, rconn->rmplen) < 0) { |
| syslog(LOG_ERR, "write: %s: %m", EnetStr(rconn)); |
| return(0); |
| } |
| |
| return(1); |
| } |
| |
| /* |
| ** BpfClose -- Close a BPF device. |
| ** |
| ** Parameters: |
| ** None. |
| ** |
| ** Returns: |
| ** Nothing. |
| ** |
| ** Side Effects: |
| ** None. |
| */ |
| void |
| BpfClose() |
| { |
| struct ifreq ifr; |
| |
| if (BpfPkt != NULL) { |
| free((char *)BpfPkt); |
| BpfPkt = NULL; |
| } |
| |
| if (BpfFd == -1) |
| return; |
| |
| #ifdef MSG_EOR |
| ifr.ifr_addr.sa_len = RMP_ADDRLEN + 2; |
| #endif |
| ifr.ifr_addr.sa_family = AF_UNSPEC; |
| bcopy(&RmpMcastAddr[0], (char *)&ifr.ifr_addr.sa_data[0], RMP_ADDRLEN); |
| if (ioctl(BpfFd, SIOCDELMULTI, (caddr_t)&ifr) < 0) |
| (void) ioctl(BpfFd, BIOCPROMISC, (caddr_t)0); |
| |
| (void) close(BpfFd); |
| BpfFd = -1; |
| } |