# SPDX-License-Identifier: GPL-2.0-only

all-dtb := $(dtb-y) $(dtb-)

# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
dtb-$(CONFIG_OF_ALL_DTBS) += $(dtb-)

# Composite DTB (i.e. DTB constructed by overlay)
multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs)
# Primitive DTB compiled from *.dts
real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs)
# Base DTB that overlay is applied onto
base-dtb-y := $(filter %.dtb, $(call real-search, $(multi-dtb-y), .dtb, -dtbs))

# Ensure that any .dtbo is applied to at least one base .dtb. Otherwise, it
# does not get validated.
applied-dtbo := $(filter %.dtbo, \
	$(call real-search, $(call multi-search, $(all-dtb), .dtb, -dtbs), .dtb, -dtbs))
unapplied-dtbo := $(filter-out $(applied-dtbo),$(filter %.dtbo, $(dtb-y)))
$(if $(unapplied-dtbo), $(warning .dtbo is not applied to any base: $(unapplied-dtbo)))

dtb-y           := $(addprefix $(obj)/, $(dtb-y))
multi-dtb-y     := $(addprefix $(obj)/, $(multi-dtb-y))
real-dtb-y      := $(addprefix $(obj)/, $(real-dtb-y))

always-y        += $(dtb-y)
targets         += $(real-dtb-y)

# dtbs-list
# ---------------------------------------------------------------------------

ifdef need-dtbslist
subdir-dtbslist := $(addsuffix /dtbs-list, $(subdir-ym))
dtb-y           += $(subdir-dtbslist)
always-y        += $(obj)/dtbs-list
endif

$(subdir-dtbslist): $(obj)/%/dtbs-list: $(obj)/% ;

$(obj)/dtbs-list: $(dtb-y) FORCE
	$(call if_changed,gen_order)

# Assembly file to wrap dtb(o)
# ---------------------------------------------------------------------------

builtin-dtb-section = $(if $(filter arch/$(SRCARCH)/boot/dts%, $(obj)),.dtb.init.rodata,.rodata)

# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_wrap_S_dtb = WRAP    $@
      cmd_wrap_S_dtb = {								\
		symbase=__$(patsubst .%,%,$(suffix $<))_$(subst -,_,$(notdir $*));	\
		echo '\#include <asm-generic/vmlinux.lds.h>';				\
		echo '.section $(builtin-dtb-section),"a"';				\
		echo '.balign STRUCT_ALIGNMENT';					\
		echo ".global $${symbase}_begin";					\
		echo "$${symbase}_begin:";						\
		echo '.incbin "$<" ';							\
		echo ".global $${symbase}_end";						\
		echo "$${symbase}_end:";						\
		echo '.balign STRUCT_ALIGNMENT';					\
	} > $@

$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
	$(call if_changed,wrap_S_dtb)

$(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE
	$(call if_changed,wrap_S_dtb)

# Schema check
# ---------------------------------------------------------------------------

ifneq ($(CHECK_DTBS),)
DT_CHECKER ?= dt-validate
DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m)
DT_BINDING_DIR := Documentation/devicetree/bindings
DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json
dtb-check-enabled = $(if $(filter %.dtb, $@),y)
endif

quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C],   )
cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true)

# Overlay
# ---------------------------------------------------------------------------

# NOTE:
# Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single
# DTB is turned into a multi-blob DTB, $^ will contain header file dependencies
# recorded in the .*.cmd file.
quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@
      cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check)

$(multi-dtb-y): $(DT_TMP_SCHEMA) FORCE
	$(call if_changed,fdtoverlay)
$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs)

# DTC
# ---------------------------------------------------------------------------

DTC ?= $(objtree)/scripts/dtc/dtc
DTC_FLAGS += -Wno-unique_unit_address

# Disable noisy checks by default
ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),)
DTC_FLAGS += -Wno-unit_address_vs_reg \
             -Wno-avoid_unnecessary_addr_size \
             -Wno-alias_paths \
             -Wno-graph_child_address \
             -Wno-interrupt_map \
             -Wno-simple_bus_reg
else
DTC_FLAGS += -Wunique_unit_address_if_enabled
endif

ifneq ($(findstring 2,$(KBUILD_EXTRA_WARN)),)
DTC_FLAGS += -Wnode_name_chars_strict \
             -Wproperty_name_chars_strict \
             -Wunique_unit_address
endif

DTC_FLAGS += $(DTC_FLAGS_$(target-stem))

# Set -@ if the target is a base DTB that overlay is applied onto
DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@)

DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes

dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc -I $(DTC_INCLUDE) -undef -D__DTS__

dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)

quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@
      cmd_dtc = \
	$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
	$(DTC) -o $@ -b 0 $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) \
	       $(DTC_FLAGS) -d $(depfile).dtc.tmp $(dtc-tmp) ; \
	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \
	$(cmd_dtb_check)

$(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
	$(call if_changed_dep,dtc)

$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
	$(call if_changed_dep,dtc)

# targets
# ---------------------------------------------------------------------------

targets += $(always-y)

# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
# %.dtbo.o <- %.dtbo.S <- %.dtbo <- %.dtso
targets += $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
           $(call intermediate_targets, .dtbo.o, .dtbo.S .dtbo)