| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) | |
| // Copyright (C) 2022 Samuel Holland <samuel@sholland.org> | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include <dt-bindings/leds/common.h> | |
| /dts-v1/; | |
| #include "sun20i-d1s.dtsi" | |
| #include "sun20i-common-regulators.dtsi" | |
| / { | |
| model = "MangoPi MQ"; | |
| compatible = "widora,mangopi-mq", "allwinner,sun20i-d1s"; | |
| aliases { | |
| ethernet0 = &rtl8189ftv; | |
| serial3 = &uart3; | |
| }; | |
| chosen { | |
| stdout-path = "serial3:115200n8"; | |
| }; | |
| leds { | |
| compatible = "gpio-leds"; | |
| led-0 { | |
| color = <LED_COLOR_ID_BLUE>; | |
| function = LED_FUNCTION_STATUS; | |
| gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */ | |
| }; | |
| }; | |
| reg_avdd2v8: avdd2v8 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "avdd2v8"; | |
| regulator-min-microvolt = <2800000>; | |
| regulator-max-microvolt = <2800000>; | |
| vin-supply = <®_vcc_3v3>; | |
| }; | |
| reg_dvdd: dvdd { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "dvdd"; | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <1200000>; | |
| vin-supply = <®_vcc_3v3>; | |
| }; | |
| reg_vcc_core: vcc-core { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc-core"; | |
| regulator-min-microvolt = <900000>; | |
| regulator-max-microvolt = <900000>; | |
| vin-supply = <®_vcc>; | |
| }; | |
| wifi_pwrseq: wifi-pwrseq { | |
| compatible = "mmc-pwrseq-simple"; | |
| reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ | |
| }; | |
| }; | |
| &cpu0 { | |
| cpu-supply = <®_vcc_core>; | |
| }; | |
| &dcxo { | |
| clock-frequency = <24000000>; | |
| }; | |
| &ehci1 { | |
| status = "okay"; | |
| }; | |
| &mmc0 { | |
| bus-width = <4>; | |
| cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ | |
| disable-wp; | |
| vmmc-supply = <®_vcc_3v3>; | |
| vqmmc-supply = <®_vcc_3v3>; | |
| pinctrl-0 = <&mmc0_pins>; | |
| pinctrl-names = "default"; | |
| status = "okay"; | |
| }; | |
| &mmc1 { | |
| bus-width = <4>; | |
| mmc-pwrseq = <&wifi_pwrseq>; | |
| non-removable; | |
| vmmc-supply = <®_vcc_3v3>; | |
| vqmmc-supply = <®_vcc_3v3>; | |
| pinctrl-0 = <&mmc1_pins>; | |
| pinctrl-names = "default"; | |
| status = "okay"; | |
| rtl8189ftv: wifi@1 { | |
| reg = <1>; | |
| interrupt-parent = <&pio>; | |
| interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */ | |
| interrupt-names = "host-wake"; | |
| }; | |
| }; | |
| &ohci1 { | |
| status = "okay"; | |
| }; | |
| &pio { | |
| vcc-pe-supply = <®_avdd2v8>; | |
| }; | |
| &uart3 { | |
| pinctrl-0 = <&uart3_pb_pins>; | |
| pinctrl-names = "default"; | |
| status = "okay"; | |
| }; | |
| &usb_otg { | |
| dr_mode = "peripheral"; | |
| status = "okay"; | |
| }; | |
| &usbphy { | |
| usb1_vbus-supply = <®_vcc>; | |
| status = "okay"; | |
| }; |