Merge tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:

 - A fix for a regression caused by the previous set of bugfixes
   changing tegra and at91 pinctrl properties.

   More work is needed to figure out what this should actually be, but a
   revert makes it work for the moment.

 - Defconfig regression fixes for tegra after renamed symbols

 - Build-time warning and static checker fixes for imx, op-tee, sunxi,
   meson, at91, and omap

 - More at91 DT fixes for audio, regulator and spi nodes

 - A regression fix for Renesas Hyperflash memory probe

 - A stability fix for amlogic boards, modifying the allowed cpufreq
   states

 - Multiple fixes for system suspend on omap2+

 - DT fixes for various i.MX bugs

 - A probe error fix for imx6ull-colibri MMC

 - A MAINTAINERS file entry for samsung bug reports

* tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  Revert "arm: dts: at91: Fix boolean properties with values"
  bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
  Revert "arm64: dts: tegra: Fix boolean properties with values"
  arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
  ARM: dts: imx6ull-colibri: fix vqmmc regulator
  MAINTAINERS: add Bug entry for Samsung and memory controller drivers
  memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
  ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
  ARM: dts: am3517-evm: Fix misc pinmuxing
  ARM: dts: am33xx-l4: Add missing touchscreen clock properties
  ARM: dts: Fix mmc order for omap3-gta04
  ARM: dts: at91: fix pinctrl phandles
  ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
  ARM: dts: at91: Describe regulators on at91sam9g20ek
  ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
  ARM: dts: at91: Fix boolean properties with values
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: at91: align SPI NOR node name with dtschema
  ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines
  ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
  ...

[ upstream commit: 8013d1d3d2e33236dee13a133fba49ad55045e79 ]
diff --git a/Bindings/mfd/atmel-flexcom.txt b/Bindings/mfd/atmel-flexcom.txt
index 6923001..9d83753 100644
--- a/Bindings/mfd/atmel-flexcom.txt
+++ b/Bindings/mfd/atmel-flexcom.txt
@@ -54,7 +54,7 @@
 		clock-names = "spi_clk";
 		atmel,fifo-size = <32>;
 
-		mtd_dataflash@0 {
+		flash@0 {
 			compatible = "atmel,at25f512b";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git a/src/arm/am33xx-l4.dtsi b/src/arm/am33xx-l4.dtsi
index c9629cb..7da42a5 100644
--- a/src/arm/am33xx-l4.dtsi
+++ b/src/arm/am33xx-l4.dtsi
@@ -263,6 +263,8 @@
 				compatible = "ti,am3359-tscadc";
 				reg = <0x0 0x1000>;
 				interrupts = <16>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
 				status = "disabled";
 				dmas = <&edma 53 0>, <&edma 57 0>;
 				dma-names = "fifo0", "fifo1";
diff --git a/src/arm/am3517-evm.dts b/src/arm/am3517-evm.dts
index 0d2fac9..c8b80f1 100644
--- a/src/arm/am3517-evm.dts
+++ b/src/arm/am3517-evm.dts
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git a/src/arm/am3517-som.dtsi b/src/arm/am3517-som.dtsi
index 8b669e2..f7b680f 100644
--- a/src/arm/am3517-som.dtsi
+++ b/src/arm/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git a/src/arm/at91-dvk_su60_somc.dtsi b/src/arm/at91-dvk_su60_somc.dtsi
index c1c8650..3542ad8 100644
--- a/src/arm/at91-dvk_su60_somc.dtsi
+++ b/src/arm/at91-dvk_su60_somc.dtsi
@@ -44,7 +44,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
 		spi-max-frequency = <33000000>;
 		reg = <0>;
diff --git a/src/arm/at91-kizbox3-hs.dts b/src/arm/at91-kizbox3-hs.dts
index f7d90cf..2799b2a 100644
--- a/src/arm/at91-kizbox3-hs.dts
+++ b/src/arm/at91-kizbox3-hs.dts
@@ -225,7 +225,7 @@
 		pinctrl_pio_io_reset: gpio_io_reset {
 			pinmux = <PIN_PB30__GPIO>;
 			bias-disable;
-			drive-open-drain;
+			drive-open-drain = <1>;
 			output-low;
 		};
 		pinctrl_pio_input: gpio_input {
diff --git a/src/arm/at91-kizbox3_common.dtsi b/src/arm/at91-kizbox3_common.dtsi
index 4656646..abe27ad 100644
--- a/src/arm/at91-kizbox3_common.dtsi
+++ b/src/arm/at91-kizbox3_common.dtsi
@@ -211,7 +211,7 @@
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
-		drive-open-drain;
+		drive-open-drain = <1>;
 	};
 
 	pinctrl_pwm0 {
diff --git a/src/arm/at91-q5xr5.dts b/src/arm/at91-q5xr5.dts
index 47a0006..9cf60b6 100644
--- a/src/arm/at91-q5xr5.dts
+++ b/src/arm/at91-q5xr5.dts
@@ -125,7 +125,7 @@
 	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/src/arm/at91-sama5d27_wlsom1.dtsi b/src/arm/at91-sama5d27_wlsom1.dtsi
index 21c8617..ba62178 100644
--- a/src/arm/at91-sama5d27_wlsom1.dtsi
+++ b/src/arm/at91-sama5d27_wlsom1.dtsi
@@ -214,7 +214,7 @@
 	pinctrl-0 = <&pinctrl_qspi1_default>;
 	status = "disabled";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/src/arm/at91-sama5d27_wlsom1_ek.dts b/src/arm/at91-sama5d27_wlsom1_ek.dts
index c145c4e..5e8755f 100644
--- a/src/arm/at91-sama5d27_wlsom1_ek.dts
+++ b/src/arm/at91-sama5d27_wlsom1_ek.dts
@@ -191,7 +191,7 @@
 &qspi1 {
 	status = "okay";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		status = "okay";
 	};
 };
diff --git a/src/arm/at91-sama5d2_xplained.dts b/src/arm/at91-sama5d2_xplained.dts
index 9bf2ec0..cdfe891 100644
--- a/src/arm/at91-sama5d2_xplained.dts
+++ b/src/arm/at91-sama5d2_xplained.dts
@@ -137,7 +137,7 @@
 				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					reg = <0>;
 					spi-max-frequency = <50000000>;
diff --git a/src/arm/at91-sama5d3_xplained.dts b/src/arm/at91-sama5d3_xplained.dts
index d72c042..a49c296 100644
--- a/src/arm/at91-sama5d3_xplained.dts
+++ b/src/arm/at91-sama5d3_xplained.dts
@@ -57,8 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -171,8 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
diff --git a/src/arm/at91-sama5d4_ma5d4.dtsi b/src/arm/at91-sama5d4_ma5d4.dtsi
index 710cb72..fd1086f 100644
--- a/src/arm/at91-sama5d4_ma5d4.dtsi
+++ b/src/arm/at91-sama5d4_ma5d4.dtsi
@@ -49,7 +49,7 @@
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/at91-sama5d4_xplained.dts b/src/arm/at91-sama5d4_xplained.dts
index d241c24..e519d27 100644
--- a/src/arm/at91-sama5d4_xplained.dts
+++ b/src/arm/at91-sama5d4_xplained.dts
@@ -81,8 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -140,7 +140,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
diff --git a/src/arm/at91-sama5d4ek.dts b/src/arm/at91-sama5d4ek.dts
index fe432b6..7017f62 100644
--- a/src/arm/at91-sama5d4ek.dts
+++ b/src/arm/at91-sama5d4ek.dts
@@ -65,7 +65,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/at91-sama7g5ek.dts b/src/arm/at91-sama7g5ek.dts
index 08685a1..d83f76a 100644
--- a/src/arm/at91-sama7g5ek.dts
+++ b/src/arm/at91-sama7g5ek.dts
@@ -495,7 +495,7 @@
 	pinctrl_flx3_default: flx3_default {
 		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
+		bias-pull-up;
 	};
 
 	pinctrl_flx4_default: flx4_default {
@@ -655,7 +655,7 @@
 			 <PIN_PB21__QSPI0_INT>;
 		bias-disable;
 		slew-rate = <0>;
-		atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
 	};
 
 	pinctrl_sdmmc0_default: sdmmc0_default {
diff --git a/src/arm/at91-vinco.dts b/src/arm/at91-vinco.dts
index a51a337..ebeaa6a 100644
--- a/src/arm/at91-vinco.dts
+++ b/src/arm/at91-vinco.dts
@@ -59,7 +59,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "n25q32b", "jedec,spi-nor";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/at91rm9200ek.dts b/src/arm/at91rm9200ek.dts
index e1ef4e4..4624a6f 100644
--- a/src/arm/at91rm9200ek.dts
+++ b/src/arm/at91rm9200ek.dts
@@ -73,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -94,7 +94,7 @@
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";
diff --git a/src/arm/at91sam9260ek.dts b/src/arm/at91sam9260ek.dts
index ce96345..6381088 100644
--- a/src/arm/at91sam9260ek.dts
+++ b/src/arm/at91sam9260ek.dts
@@ -92,7 +92,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
diff --git a/src/arm/at91sam9261ek.dts b/src/arm/at91sam9261ek.dts
index beed819..8f11c0b 100644
--- a/src/arm/at91sam9261ek.dts
+++ b/src/arm/at91sam9261ek.dts
@@ -145,7 +145,7 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
diff --git a/src/arm/at91sam9263ek.dts b/src/arm/at91sam9263ek.dts
index 71f6057..42e7340 100644
--- a/src/arm/at91sam9263ek.dts
+++ b/src/arm/at91sam9263ek.dts
@@ -95,7 +95,7 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/at91sam9g20ek_common.dtsi b/src/arm/at91sam9g20ek_common.dtsi
index 87bb390..85c17dd 100644
--- a/src/arm/at91sam9g20ek_common.dtsi
+++ b/src/arm/at91sam9g20ek_common.dtsi
@@ -110,7 +110,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -214,11 +214,23 @@
 		24c512@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
 		};
 
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
 		};
 	};
 
@@ -254,4 +266,35 @@
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8731>;
 	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
diff --git a/src/arm/at91sam9m10g45ek.dts b/src/arm/at91sam9m10g45ek.dts
index b6256a2..e5db198 100644
--- a/src/arm/at91sam9m10g45ek.dts
+++ b/src/arm/at91sam9m10g45ek.dts
@@ -167,7 +167,7 @@
 			spi0: spi@fffa4000{
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;
diff --git a/src/arm/at91sam9n12ek.dts b/src/arm/at91sam9n12ek.dts
index 2bc4e6e..c905d7b 100644
--- a/src/arm/at91sam9n12ek.dts
+++ b/src/arm/at91sam9n12ek.dts
@@ -119,7 +119,7 @@
 			spi0: spi@f0000000 {
 				status = "okay";
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/at91sam9rlek.dts b/src/arm/at91sam9rlek.dts
index 62981b3..d74b8d9 100644
--- a/src/arm/at91sam9rlek.dts
+++ b/src/arm/at91sam9rlek.dts
@@ -180,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
diff --git a/src/arm/at91sam9x5ek.dtsi b/src/arm/at91sam9x5ek.dtsi
index 6d1264d..5f4eaa6 100644
--- a/src/arm/at91sam9x5ek.dtsi
+++ b/src/arm/at91sam9x5ek.dtsi
@@ -125,7 +125,7 @@
 	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
 	status = "disabled"; /* conflicts with mmc1 */
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "atmel,at25df321a";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/src/arm/dra7-l4.dtsi b/src/arm/dra7-l4.dtsi
index 0a11bac..5733e3a 100644
--- a/src/arm/dra7-l4.dtsi
+++ b/src/arm/dra7-l4.dtsi
@@ -4188,11 +4188,11 @@
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git a/src/arm/imx6qdl-apalis.dtsi b/src/arm/imx6qdl-apalis.dtsi
index ed2739e..bd763ba 100644
--- a/src/arm/imx6qdl-apalis.dtsi
+++ b/src/arm/imx6qdl-apalis.dtsi
@@ -286,6 +286,8 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -517,8 +519,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -811,6 +811,12 @@
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
diff --git a/src/arm/imx6ull-colibri.dtsi b/src/arm/imx6ull-colibri.dtsi
index 7f35a06..951a2a6 100644
--- a/src/arm/imx6ull-colibri.dtsi
+++ b/src/arm/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
diff --git a/src/arm/logicpd-som-lv-35xx-devkit.dts b/src/arm/logicpd-som-lv-35xx-devkit.dts
index 2a0a98f..3240c67 100644
--- a/src/arm/logicpd-som-lv-35xx-devkit.dts
+++ b/src/arm/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/src/arm/logicpd-som-lv-37xx-devkit.dts b/src/arm/logicpd-som-lv-37xx-devkit.dts
index a604d92..c757f0d 100644
--- a/src/arm/logicpd-som-lv-37xx-devkit.dts
+++ b/src/arm/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/src/arm/logicpd-som-lv.dtsi b/src/arm/logicpd-som-lv.dtsi
index b56524c..55b619c 100644
--- a/src/arm/logicpd-som-lv.dtsi
+++ b/src/arm/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git a/src/arm/omap3-gta04.dtsi b/src/arm/omap3-gta04.dtsi
index 7e3d814..0365f06 100644
--- a/src/arm/omap3-gta04.dtsi
+++ b/src/arm/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
diff --git a/src/arm/sama5d3xmb.dtsi b/src/arm/sama5d3xmb.dtsi
index a499de8..3652c9e 100644
--- a/src/arm/sama5d3xmb.dtsi
+++ b/src/arm/sama5d3xmb.dtsi
@@ -26,7 +26,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/sama5d3xmb_cmp.dtsi b/src/arm/sama5d3xmb_cmp.dtsi
index fa9e5e2..5d9e97f 100644
--- a/src/arm/sama5d3xmb_cmp.dtsi
+++ b/src/arm/sama5d3xmb_cmp.dtsi
@@ -25,7 +25,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/src/arm/sama7g5.dtsi b/src/arm/sama7g5.dtsi
index 4decd3a..f691c8f 100644
--- a/src/arm/sama7g5.dtsi
+++ b/src/arm/sama7g5.dtsi
@@ -601,9 +601,9 @@
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
-					<&dma0 AT91_XDMAC_DT_PERID(8)>;
-				dma-names = "rx", "tx";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -786,9 +786,9 @@
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
-					<&dma0 AT91_XDMAC_DT_PERID(22)>;
-				dma-names = "rx", "tx";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -810,9 +810,9 @@
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
-					<&dma0 AT91_XDMAC_DT_PERID(24)>;
-				dma-names = "rx", "tx";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
diff --git a/src/arm/usb_a9263.dts b/src/arm/usb_a9263.dts
index 8a0cfbf..b6cb9cd 100644
--- a/src/arm/usb_a9263.dts
+++ b/src/arm/usb_a9263.dts
@@ -60,7 +60,7 @@
 			spi0: spi@fffa4000 {
 				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
 				status = "okay";
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
diff --git a/src/arm64/amlogic/meson-g12b-a311d.dtsi b/src/arm64/amlogic/meson-g12b-a311d.dtsi
index d61f430..8e9ad1e 100644
--- a/src/arm64/amlogic/meson-g12b-a311d.dtsi
+++ b/src/arm64/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
@@ -71,26 +51,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
diff --git a/src/arm64/amlogic/meson-g12b-s922x.dtsi b/src/arm64/amlogic/meson-g12b-s922x.dtsi
index 1e5d0ee..44c23c9 100644
--- a/src/arm64/amlogic/meson-g12b-s922x.dtsi
+++ b/src/arm64/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
@@ -76,26 +56,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <751000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
diff --git a/src/arm64/amlogic/meson-s4.dtsi b/src/arm64/amlogic/meson-s4.dtsi
index bf9ae1e..480afa2 100644
--- a/src/arm64/amlogic/meson-s4.dtsi
+++ b/src/arm64/amlogic/meson-s4.dtsi
@@ -13,28 +13,28 @@
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35","arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35","arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35","arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35","arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 		};
diff --git a/src/arm64/amlogic/meson-sm1-bananapi-m5.dts b/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
index 5751c48..cadba19 100644
--- a/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
+++ b/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
@@ -437,6 +437,7 @@
 		"",
 		"eMMC_RST#", /* BOOT_12 */
 		"eMMC_DS", /* BOOT_13 */
+		"", "",
 		/* GPIOC */
 		"SD_D0_B", /* GPIOC_0 */
 		"SD_D1_B", /* GPIOC_1 */
diff --git a/src/arm64/amlogic/meson-sm1.dtsi b/src/arm64/amlogic/meson-sm1.dtsi
index 3c07a89..8073773 100644
--- a/src/arm64/amlogic/meson-sm1.dtsi
+++ b/src/arm64/amlogic/meson-sm1.dtsi
@@ -95,26 +95,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <750000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
diff --git a/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
index 73addc0..cce55c3 100644
--- a/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
@@ -146,12 +146,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -215,7 +217,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
 		>;
 	};
diff --git a/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi
index 1e7badb..f61e484 100644
--- a/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi
@@ -211,12 +211,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };
@@ -309,7 +311,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
 		>;
 	};
diff --git a/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi
index 426483e..0236196 100644
--- a/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi
@@ -238,12 +238,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };
@@ -358,7 +360,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
 		>;
 	};
diff --git a/src/arm64/freescale/imx8mn-ddr4-evk.dts b/src/arm64/freescale/imx8mn-ddr4-evk.dts
index 7dfee71..d8ce217 100644
--- a/src/arm64/freescale/imx8mn-ddr4-evk.dts
+++ b/src/arm64/freescale/imx8mn-ddr4-evk.dts
@@ -59,6 +59,10 @@
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "buck1";
diff --git a/src/arm64/freescale/imx8mn.dtsi b/src/arm64/freescale/imx8mn.dtsi
index 99f0f50..5c0ca24 100644
--- a/src/arm64/freescale/imx8mn.dtsi
+++ b/src/arm64/freescale/imx8mn.dtsi
@@ -293,7 +293,7 @@
 				ranges;
 
 				sai2: sai@30020000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
@@ -307,7 +307,7 @@
 				};
 
 				sai3: sai@30030000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
@@ -321,7 +321,7 @@
 				};
 
 				sai5: sai@30050000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
@@ -337,7 +337,7 @@
 				};
 
 				sai6: sai@30060000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
@@ -394,7 +394,7 @@
 				};
 
 				sai7: sai@300b0000 {
-					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
diff --git a/src/arm64/freescale/imx8mq-tqma8mq.dtsi b/src/arm64/freescale/imx8mq-tqma8mq.dtsi
index 38ffcd1..899e8e7 100644
--- a/src/arm64/freescale/imx8mq-tqma8mq.dtsi
+++ b/src/arm64/freescale/imx8mq-tqma8mq.dtsi
@@ -253,7 +253,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 	};
 };
diff --git a/src/arm64/freescale/imx8qm.dtsi b/src/arm64/freescale/imx8qm.dtsi
index be8c76a..4f76701 100644
--- a/src/arm64/freescale/imx8qm.dtsi
+++ b/src/arm64/freescale/imx8qm.dtsi
@@ -196,7 +196,7 @@
 		};
 
 		clk: clock-controller {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+			compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
 			#clock-cells = <2>;
 		};
 
diff --git a/src/arm64/nvidia/tegra186-p3310.dtsi b/src/arm64/nvidia/tegra186-p3310.dtsi
index 1df8433..aff857d 100644
--- a/src/arm64/nvidia/tegra186-p3310.dtsi
+++ b/src/arm64/nvidia/tegra186-p3310.dtsi
@@ -262,25 +262,25 @@
 					gpio4 {
 						pins = "gpio4";
 						function = "32k-out1";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio5 {
 						pins = "gpio5";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <0>;
 					};
 
 					gpio6 {
 						pins = "gpio6";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio7 {
 						pins = "gpio7";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <0>;
 					};
 				};
 
diff --git a/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts b/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 1ab132c..4631504 100644
--- a/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -462,25 +462,25 @@
 					gpio4 {
 						pins = "gpio4";
 						function = "32k-out1";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio5 {
 						pins = "gpio5";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <0>;
 					};
 
 					gpio6 {
 						pins = "gpio6";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio7 {
 						pins = "gpio7";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 				};
 
diff --git a/src/arm64/nvidia/tegra194-p2888.dtsi b/src/arm64/nvidia/tegra194-p2888.dtsi
index 634d0f4..a7d7cfd 100644
--- a/src/arm64/nvidia/tegra194-p2888.dtsi
+++ b/src/arm64/nvidia/tegra194-p2888.dtsi
@@ -174,19 +174,19 @@
 					gpio4 {
 						pins = "gpio4";
 						function = "32k-out1";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio6 {
 						pins = "gpio6";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio7 {
 						pins = "gpio7";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <0>;
 					};
 				};
 
diff --git a/src/arm64/nvidia/tegra194-p3668.dtsi b/src/arm64/nvidia/tegra194-p3668.dtsi
index 0b219e7..0bd66f9 100644
--- a/src/arm64/nvidia/tegra194-p3668.dtsi
+++ b/src/arm64/nvidia/tegra194-p3668.dtsi
@@ -148,19 +148,19 @@
 					gpio4 {
 						pins = "gpio4";
 						function = "32k-out1";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio6 {
 						pins = "gpio6";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <1>;
 					};
 
 					gpio7 {
 						pins = "gpio7";
 						function = "gpio";
-						drive-push-pull;
+						drive-push-pull = <0>;
 					};
 				};
 
diff --git a/src/arm64/nvidia/tegra210-p2180.dtsi b/src/arm64/nvidia/tegra210-p2180.dtsi
index 0fe772b..75eb743 100644
--- a/src/arm64/nvidia/tegra210-p2180.dtsi
+++ b/src/arm64/nvidia/tegra210-p2180.dtsi
@@ -59,7 +59,7 @@
 				gpio1 {
 					pins = "gpio1";
 					function = "fps-out";
-					drive-push-pull;
+					drive-push-pull = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 					maxim,active-fps-power-up-slot = <7>;
 					maxim,active-fps-power-down-slot = <0>;
@@ -68,7 +68,7 @@
 				gpio2_3 {
 					pins = "gpio2", "gpio3";
 					function = "fps-out";
-					drive-open-drain;
+					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 				};
 
@@ -80,7 +80,7 @@
 				gpio5_6_7 {
 					pins = "gpio5", "gpio6", "gpio7";
 					function = "gpio";
-					drive-push-pull;
+					drive-push-pull = <1>;
 				};
 			};
 
diff --git a/src/arm64/nvidia/tegra210-p2894.dtsi b/src/arm64/nvidia/tegra210-p2894.dtsi
index 936a309..10347b6 100644
--- a/src/arm64/nvidia/tegra210-p2894.dtsi
+++ b/src/arm64/nvidia/tegra210-p2894.dtsi
@@ -1351,7 +1351,7 @@
 				gpio1 {
 					pins = "gpio1";
 					function = "fps-out";
-					drive-push-pull;
+					drive-push-pull = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 					maxim,active-fps-power-up-slot = <7>;
 					maxim,active-fps-power-down-slot = <0>;
@@ -1360,14 +1360,14 @@
 				gpio2 {
 					pins = "gpio2";
 					function = "fps-out";
-					drive-open-drain;
+					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 				};
 
 				gpio3 {
 					pins = "gpio3";
 					function = "fps-out";
-					drive-open-drain;
+					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 				};
 
@@ -1379,7 +1379,7 @@
 				gpio5_6_7 {
 					pins = "gpio5", "gpio6", "gpio7";
 					function = "gpio";
-					drive-push-pull;
+					drive-push-pull = <1>;
 				};
 			};
 
diff --git a/src/arm64/nvidia/tegra210-p3450-0000.dts b/src/arm64/nvidia/tegra210-p3450-0000.dts
index f644612..72c2dc3 100644
--- a/src/arm64/nvidia/tegra210-p3450-0000.dts
+++ b/src/arm64/nvidia/tegra210-p3450-0000.dts
@@ -195,7 +195,7 @@
 				gpio1 {
 					pins = "gpio1";
 					function = "fps-out";
-					drive-push-pull;
+					drive-push-pull = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
 					maxim,active-fps-power-up-slot = <0>;
 					maxim,active-fps-power-down-slot = <7>;
@@ -204,7 +204,7 @@
 				gpio2 {
 					pins = "gpio2";
 					function = "fps-out";
-					drive-open-drain;
+					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 					maxim,active-fps-power-up-slot = <0>;
 					maxim,active-fps-power-down-slot = <7>;
@@ -213,7 +213,7 @@
 				gpio3 {
 					pins = "gpio3";
 					function = "fps-out";
-					drive-open-drain;
+					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 					maxim,active-fps-power-up-slot = <4>;
 					maxim,active-fps-power-down-slot = <3>;
@@ -227,7 +227,7 @@
 				gpio5_6_7 {
 					pins = "gpio5", "gpio6", "gpio7";
 					function = "gpio";
-					drive-push-pull;
+					drive-push-pull = <1>;
 				};
 			};
 
diff --git a/src/arm64/nvidia/tegra210-smaug.dts b/src/arm64/nvidia/tegra210-smaug.dts
index e42384f..a263d51 100644
--- a/src/arm64/nvidia/tegra210-smaug.dts
+++ b/src/arm64/nvidia/tegra210-smaug.dts
@@ -1386,7 +1386,7 @@
 				gpio3 {
 					pins = "gpio3";
 					function = "fps-out";
-					drive-open-drain;
+					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 					maxim,active-fps-power-up-slot = <4>;
 					maxim,active-fps-power-down-slot = <2>;
@@ -1395,7 +1395,7 @@
 				gpio5_6 {
 					pins = "gpio5", "gpio6";
 					function = "gpio";
-					drive-push-pull;
+					drive-push-pull = <1>;
 				};
 
 				gpio4 {