| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source |
| * |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device |
| * tree nodes are listed in this file. |
| */ |
| |
| #include <dt-bindings/pinctrl/samsung.h> |
| |
| &pinctrl_0 { |
| gpa0: gpa0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpa1: gpa1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpa2: gpa2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb0: gpb0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb1: gpb1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb2: gpb2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb3: gpb3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb4: gpb4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb5: gpb5-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd0: gpd0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd1: gpd1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpd2: gpd2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpe0: gpe0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpe1: gpe1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf0: gpf0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf1: gpf1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk0: gpk0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx0: gpx0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx1: gpx1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx2: gpx2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx3: gpx3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| uart0_data: uart0-data-pins { |
| samsung,pins = "gpa0-0", "gpa0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| uart0_fctl: uart0-fctl-pins { |
| samsung,pins = "gpa0-2", "gpa0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| uart1_data: uart1-data-pins { |
| samsung,pins = "gpa1-0", "gpa1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| uart1_fctl: uart1-fctl-pins { |
| samsung,pins = "gpa1-2", "gpa1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| uart2_data: uart2-data-pins { |
| samsung,pins = "gpa1-4", "gpa1-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| spi0_bus: spi0-bus-pins { |
| samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| spi1_bus: spi1-bus-pins { |
| samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| usb3_vbus0_en: usb3-vbus0-en-pins { |
| samsung,pins = "gpa2-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2s1_bus: i2s1-bus-pins { |
| samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", |
| "gpb0-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| pcm1_bus: pcm1-bus-pins { |
| samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", |
| "gpb0-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| spdif1_bus: spdif1-bus-pins { |
| samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_4>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| spi2_bus: spi2-bus-pins { |
| samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c0_hs_bus: i2c0-hs-bus-pins { |
| samsung,pins = "gpb3-0", "gpb3-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c1_hs_bus: i2c1-hs-bus-pins { |
| samsung,pins = "gpb3-2", "gpb3-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c2_hs_bus: i2c2-hs-bus-pins { |
| samsung,pins = "gpb3-4", "gpb3-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c3_hs_bus: i2c3-hs-bus-pins { |
| samsung,pins = "gpb3-6", "gpb3-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c4_bus: i2c4-bus-pins { |
| samsung,pins = "gpb4-0", "gpb4-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c5_bus: i2c5-bus-pins { |
| samsung,pins = "gpb4-2", "gpb4-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c6_bus: i2c6-bus-pins { |
| samsung,pins = "gpb4-4", "gpb4-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c7_bus: i2c7-bus-pins { |
| samsung,pins = "gpb4-6", "gpb4-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c8_bus: i2c8-bus-pins { |
| samsung,pins = "gpb5-0", "gpb5-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c9_bus: i2c9-bus-pins { |
| samsung,pins = "gpb5-2", "gpb5-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c10_bus: i2c10-bus-pins { |
| samsung,pins = "gpb5-4", "gpb5-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| i2c11_bus: i2c11-bus-pins { |
| samsung,pins = "gpb5-6", "gpb5-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| cam_gpio_a: cam-gpio-a-pins { |
| samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", |
| "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", |
| "gpe1-0", "gpe1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| cam_gpio_b: cam-gpio-b-pins { |
| samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", |
| "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| cam_i2c1_bus: cam-i2c1-bus-pins { |
| samsung,pins = "gpf0-2", "gpf0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| cam_i2c0_bus: cam-i2c0-bus-pins { |
| samsung,pins = "gpf0-0", "gpf0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| cam_spi0_bus: cam-spi0-bus-pins { |
| samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| |
| cam_spi1_bus: cam-spi1-bus-pins { |
| samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_1 { |
| gpc0: gpc0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc1: gpc1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc2: gpc2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc3: gpc3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc4: gpc4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sd0_clk: sd0-clk-pins { |
| samsung,pins = "gpc0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd0_cmd: sd0-cmd-pins { |
| samsung,pins = "gpc0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd0_bus1: sd0-bus-width1-pins { |
| samsung,pins = "gpc0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd0_bus4: sd0-bus-width4-pins { |
| samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd0_bus8: sd0-bus-width8-pins { |
| samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd0_rdqs: sd0-rdqs-pins { |
| samsung,pins = "gpc0-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd1_clk: sd1-clk-pins { |
| samsung,pins = "gpc1-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd1_cmd: sd1-cmd-pins { |
| samsung,pins = "gpc1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd1_bus1: sd1-bus-width1-pins { |
| samsung,pins = "gpc1-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd1_bus4: sd1-bus-width4-pins { |
| samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd1_bus8: sd1-bus-width8-pins { |
| samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd2_clk: sd2-clk-pins { |
| samsung,pins = "gpc2-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd2_cmd: sd2-cmd-pins { |
| samsung,pins = "gpc2-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd2_cd: sd2-cd-pins { |
| samsung,pins = "gpc2-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd2_bus1: sd2-bus-width1-pins { |
| samsung,pins = "gpc2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| |
| sd2_bus4: sd2-bus-width4-pins { |
| samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>; |
| }; |
| }; |
| |
| &pinctrl_2 { |
| gpz0: gpz0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpz1: gpz1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
