| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2013 Sascha Hauer, Pengutronix |
| * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| |
| &fec { |
| interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,err006687-workaround-present; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| pinctrl-1 = <&pinctrl_i2c1_recovery>; |
| scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| pmic: pmic@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| }; |
| |
| sensor@48 { |
| compatible = "national,lm75"; |
| reg = <0x48>; |
| }; |
| |
| eeprom@50 { |
| compatible = "st,24c64", "atmel,24c64"; |
| reg = <0x50>; |
| pagesize = <32>; |
| }; |
| }; |
| |
| &iomuxc { |
| /* |
| * This pinmuxing is required for the ERR006687 workaround. Board |
| * DTS files that enable the FEC controller with |
| * fsl,err006687-workaround-present must include this group. |
| */ |
| pinctrl_enet_fix: enetfixgrp { |
| fsl,pins = < |
| /* ENET ping patch */ |
| MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 |
| >; |
| }; |
| }; |
