Revert "ARM: dts: stm32: add CAN support on stm32f746"
This reverts commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6.
The commit 0920ccdf41e3 ("ARM: dts: stm32: add CAN support on
stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add
binding definition for CAN3" [1], which is not in net/main, yet. This
results in a parsing error of "stm32f746.dtsi".
So revert this commit.
[1] https://lore.kernel.org/all/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305172108.x5acbaQG-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202305172130.eGGEUhpi-lkp@intel.com
Fixes: 0920ccdf41e3 ("ARM: dts: stm32: add CAN support on stm32f746")
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20230517181950.1106697-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[ upstream commit: 36a6418bb125944838b91a33eddca4064a5eb610 ]
diff --git a/src/arm/stm32f746.dtsi b/src/arm/stm32f746.dtsi
index 973698b..dc868e6 100644
--- a/src/arm/stm32f746.dtsi
+++ b/src/arm/stm32f746.dtsi
@@ -257,23 +257,6 @@
status = "disabled";
};
- can3: can@40003400 {
- compatible = "st,stm32f4-bxcan";
- reg = <0x40003400 0x200>;
- interrupts = <104>, <105>, <106>, <107>;
- interrupt-names = "tx", "rx0", "rx1", "sce";
- resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
- st,gcan = <&gcan3>;
- status = "disabled";
- };
-
- gcan3: gcan@40003600 {
- compatible = "st,stm32f4-gcan", "syscon";
- reg = <0x40003600 0x200>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
- };
-
usart2: serial@40004400 {
compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
@@ -354,36 +337,6 @@
status = "disabled";
};
- can1: can@40006400 {
- compatible = "st,stm32f4-bxcan";
- reg = <0x40006400 0x200>;
- interrupts = <19>, <20>, <21>, <22>;
- interrupt-names = "tx", "rx0", "rx1", "sce";
- resets = <&rcc STM32F7_APB1_RESET(CAN1)>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
- st,can-primary;
- st,gcan = <&gcan1>;
- status = "disabled";
- };
-
- gcan1: gcan@40006600 {
- compatible = "st,stm32f4-gcan", "syscon";
- reg = <0x40006600 0x200>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
- };
-
- can2: can@40006800 {
- compatible = "st,stm32f4-bxcan";
- reg = <0x40006800 0x200>;
- interrupts = <63>, <64>, <65>, <66>;
- interrupt-names = "tx", "rx0", "rx1", "sce";
- resets = <&rcc STM32F7_APB1_RESET(CAN2)>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>;
- st,can-secondary;
- st,gcan = <&gcan1>;
- status = "disabled";
- };
-
cec: cec@40006c00 {
compatible = "st,stm32-cec";
reg = <0x40006C00 0x400>;
