Merge tag 'v6.11-rc1-dts-raw'
Linux 6.11-rc1
diff --git a/Bindings/arm/airoha.yaml b/Bindings/arm/airoha.yaml
index 3292c66..7c38c08 100644
--- a/Bindings/arm/airoha.yaml
+++ b/Bindings/arm/airoha.yaml
@@ -22,6 +22,10 @@
- enum:
- airoha,en7523-evb
- const: airoha,en7523
+ - items:
+ - enum:
+ - airoha,en7581-evb
+ - const: airoha,en7581
additionalProperties: true
diff --git a/Bindings/arm/amlogic.yaml b/Bindings/arm/amlogic.yaml
index a374b98..0647851 100644
--- a/Bindings/arm/amlogic.yaml
+++ b/Bindings/arm/amlogic.yaml
@@ -91,6 +91,7 @@
- libretech,aml-s905x-cc
- libretech,aml-s905x-cc-v2
- nexbox,a95x
+ - osmc,vero4k
- const: amlogic,s905x
- const: amlogic,meson-gxl
@@ -107,6 +108,13 @@
- const: amlogic,s905d
- const: amlogic,meson-gxl
+ - description: Boards with the Amlogic Meson GXLX S905L SoC
+ items:
+ - enum:
+ - amlogic,p271
+ - const: amlogic,s905l
+ - const: amlogic,meson-gxlx
+
- description: Boards with the Amlogic Meson GXM S912 SoC
items:
- enum:
@@ -169,6 +177,8 @@
- azw,gtking
- azw,gtking-pro
- bananapi,bpi-m2s
+ - dream,dreambox-one
+ - dream,dreambox-two
- hardkernel,odroid-go-ultra
- hardkernel,odroid-n2
- hardkernel,odroid-n2l
diff --git a/Bindings/arm/amlogic/analog-top.txt b/Bindings/arm/amlogic/analog-top.txt
deleted file mode 100644
index 101dc21..0000000
--- a/Bindings/arm/amlogic/analog-top.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Amlogic Meson8 and Meson8b "analog top" registers:
---------------------------------------------------
-
-The analog top registers contain information about the so-called
-"metal revision" (which encodes the "minor version") of the SoC.
-
-Required properties:
-- reg: the register range of the analog top registers
-- compatible: depending on the SoC this should be one of:
- - "amlogic,meson8-analog-top"
- - "amlogic,meson8b-analog-top"
- along with "syscon"
-
-
-Example:
-
- analog_top: analog-top@81a8 {
- compatible = "amlogic,meson8-analog-top", "syscon";
- reg = <0x81a8 0x14>;
- };
diff --git a/Bindings/arm/amlogic/assist.txt b/Bindings/arm/amlogic/assist.txt
deleted file mode 100644
index 7656812..0000000
--- a/Bindings/arm/amlogic/assist.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b assist registers:
------------------------------------------------
-
-The assist registers contain basic information about the SoC,
-for example the encoded SoC part number.
-
-Required properties:
-- reg: the register range of the assist registers
-- compatible: should be "amlogic,meson-mx-assist" along with "syscon"
-
-
-Example:
-
- assist: assist@7c00 {
- compatible = "amlogic,meson-mx-assist", "syscon";
- reg = <0x7c00 0x200>;
- };
diff --git a/Bindings/arm/amlogic/bootrom.txt b/Bindings/arm/amlogic/bootrom.txt
deleted file mode 100644
index 407e27f..0000000
--- a/Bindings/arm/amlogic/bootrom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b bootrom:
---------------------------------------
-
-The bootrom register area can be used to access SoC specific
-information, such as the "misc version".
-
-Required properties:
-- reg: the register range of the bootrom registers
-- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon"
-
-
-Example:
-
- bootrom: bootrom@d9040000 {
- compatible = "amlogic,meson-mx-bootrom", "syscon";
- reg = <0xd9040000 0x10000>;
- };
diff --git a/Bindings/arm/amlogic/pmu.txt b/Bindings/arm/amlogic/pmu.txt
deleted file mode 100644
index 72f8d08..0000000
--- a/Bindings/arm/amlogic/pmu.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Amlogic Meson8 and Meson8b power-management-unit:
--------------------------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : depending on the SoC this should be one of:
- "amlogic,meson8-pmu"
- "amlogic,meson8b-pmu"
-- reg : physical base address and the size of the registers window
-
-Example:
-
- pmu@c81000e4 {
- compatible = "amlogic,meson8b-pmu", "syscon";
- reg = <0xc81000e0 0x18>;
- };
diff --git a/Bindings/arm/arm,coresight-dummy-sink.yaml b/Bindings/arm/arm,coresight-dummy-sink.yaml
index c960c8e..08b89b62 100644
--- a/Bindings/arm/arm,coresight-dummy-sink.yaml
+++ b/Bindings/arm/arm,coresight-dummy-sink.yaml
@@ -30,7 +30,7 @@
maintainers:
- Mike Leach <mike.leach@linaro.org>
- Suzuki K Poulose <suzuki.poulose@arm.com>
- - James Clark <james.clark@arm.com>
+ - James Clark <james.clark@linaro.org>
- Mao Jinlong <quic_jinlmao@quicinc.com>
- Hao Zhang <quic_hazha@quicinc.com>
diff --git a/Bindings/arm/arm,coresight-dummy-source.yaml b/Bindings/arm/arm,coresight-dummy-source.yaml
index 6745b4c..d50a603 100644
--- a/Bindings/arm/arm,coresight-dummy-source.yaml
+++ b/Bindings/arm/arm,coresight-dummy-source.yaml
@@ -29,7 +29,7 @@
maintainers:
- Mike Leach <mike.leach@linaro.org>
- Suzuki K Poulose <suzuki.poulose@arm.com>
- - James Clark <james.clark@arm.com>
+ - James Clark <james.clark@linaro.org>
- Mao Jinlong <quic_jinlmao@quicinc.com>
- Hao Zhang <quic_hazha@quicinc.com>
diff --git a/Bindings/arm/arm,juno-fpga-apb-regs.yaml b/Bindings/arm/arm,juno-fpga-apb-regs.yaml
new file mode 100644
index 0000000..ce5f2e1
--- /dev/null
+++ b/Bindings/arm/arm,juno-fpga-apb-regs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,juno-fpga-apb-regs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Juno FPGA APB Registers
+
+maintainers:
+ - Sudeep Holla <sudeep.holla@arm.com>
+
+properties:
+ compatible:
+ items:
+ - const: arm,juno-fpga-apb-regs
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ ranges: true
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+patternProperties:
+ "^led@[0-9a-f]+,[0-9a-f]$":
+ $ref: /schemas/leds/register-bit-led.yaml#
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@10000 {
+ compatible = "arm,juno-fpga-apb-regs", "syscon", "simple-mfd";
+ reg = <0x010000 0x1000>;
+ ranges = <0x0 0x10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ led@8,0 {
+ compatible = "register-bit-led";
+ reg = <0x08 0x04>;
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "vexpress:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
diff --git a/Bindings/arm/atmel-sysregs.txt b/Bindings/arm/atmel-sysregs.txt
index 67a66bf..7374beb 100644
--- a/Bindings/arm/atmel-sysregs.txt
+++ b/Bindings/arm/atmel-sysregs.txt
@@ -41,35 +41,6 @@
reg = <0xffffe800 0x200>;
};
-RAMC PHY Controller required properties:
-- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
-- reg: Should contain registers location and length
-
-Example:
-
- ddr3phy: ddr3phy@e3804000 {
- compatible = "microchip,sama7g5-ddr3phy", "syscon";
- reg = <0xe3804000 0x1000>;
-};
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
- "atmel,<chip>-sfrbu", "syscon"
- <chip> can be "sama5d3", "sama5d4" or "sama5d2".
- It also can be "microchip,sam9x60-sfr", "syscon".
-- reg: Should contain registers location and length
-
- sfr@f0038000 {
- compatible = "atmel,sama5d3-sfr", "syscon";
- reg = <0xf0038000 0x60>;
- };
-
Security Module (SECUMOD)
The Security Module macrocell provides all necessary secure functions to avoid
diff --git a/Bindings/arm/axis.txt b/Bindings/arm/axis.txt
index ae345e1..ebd33a8 100644
--- a/Bindings/arm/axis.txt
+++ b/Bindings/arm/axis.txt
@@ -7,22 +7,6 @@
Required root node properties:
- compatible = "axis,artpec6";
-ARTPEC-6 System Controller
---------------------------
-
-The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
-and resets.
-
-Required properties:
-- compatible: "axis,artpec6-syscon", "syscon"
-- reg: Address and length of the register bank.
-
-Example:
- syscon {
- compatible = "axis,artpec6-syscon", "syscon";
- reg = <0xf8000000 0x48>;
- };
-
ARTPEC-6 Development board:
---------------------------
Required root node properties:
diff --git a/Bindings/arm/bcm/bcm2835.yaml b/Bindings/arm/bcm/bcm2835.yaml
index 162a39d..e4ff71f 100644
--- a/Bindings/arm/bcm/bcm2835.yaml
+++ b/Bindings/arm/bcm/bcm2835.yaml
@@ -23,6 +23,12 @@
- raspberrypi,4-model-b
- const: brcm,bcm2711
+ - description: BCM2712 based Boards
+ items:
+ - enum:
+ - raspberrypi,5-model-b
+ - const: brcm,bcm2712
+
- description: BCM2835 based Boards
items:
- enum:
diff --git a/Bindings/arm/cpu-enable-method/al,alpine-smp b/Bindings/arm/cpu-enable-method/al,alpine-smp
index 35e5afb..cc7b140 100644
--- a/Bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/Bindings/arm/cpu-enable-method/al,alpine-smp
@@ -27,16 +27,6 @@
- reg : Offset and length of the register set for the device
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-
Example:
cpus {
diff --git a/Bindings/arm/cpus.yaml b/Bindings/arm/cpus.yaml
index cc5a21b..f308ff6 100644
--- a/Bindings/arm/cpus.yaml
+++ b/Bindings/arm/cpus.yaml
@@ -147,6 +147,7 @@
- arm,cortex-a710
- arm,cortex-a715
- arm,cortex-a720
+ - arm,cortex-a725
- arm,cortex-m0
- arm,cortex-m0+
- arm,cortex-m1
@@ -161,10 +162,15 @@
- arm,cortex-x2
- arm,cortex-x3
- arm,cortex-x4
+ - arm,cortex-x925
- arm,neoverse-e1
- arm,neoverse-n1
- arm,neoverse-n2
+ - arm,neoverse-n3
- arm,neoverse-v1
+ - arm,neoverse-v2
+ - arm,neoverse-v3
+ - arm,neoverse-v3ae
- brcm,brahma-b15
- brcm,brahma-b53
- brcm,vulcan
diff --git a/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml
index 526f508..bd39cf1 100644
--- a/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml
+++ b/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml
@@ -7,7 +7,9 @@
title: Freescale i.MX7ULP System Integration Module
maintainers:
- - Anson Huang <anson.huang@nxp.com>
+ - Shawn Guo <shawnguo@kernel.org>
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Fabio Estevam <festevam@gmail.com>
description: |
The system integration module (SIM) provides system control and chip configuration
diff --git a/Bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
deleted file mode 100644
index 44aa3c4..0000000
--- a/Bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - CPU Configuration
-
-The MSCM IP contains multiple sub modules, this binding describes the first
-block of registers which contains CPU configuration information.
-
-Required properties:
-- compatible: "fsl,vf610-mscm-cpucfg", "syscon"
-- reg: the register range of the MSCM CPU configuration registers
-
-Example:
- mscm_cpucfg: cpucfg@40001000 {
- compatible = "fsl,vf610-mscm-cpucfg", "syscon";
- reg = <0x40001000 0x800>;
- }
diff --git a/Bindings/arm/fsl.yaml b/Bindings/arm/fsl.yaml
index 6d185d0..80747d7 100644
--- a/Bindings/arm/fsl.yaml
+++ b/Bindings/arm/fsl.yaml
@@ -8,7 +8,6 @@
maintainers:
- Shawn Guo <shawnguo@kernel.org>
- - Li Yang <leoyang.li@nxp.com>
properties:
$nodename:
@@ -363,6 +362,12 @@
- const: gw,ventana
- const: fsl,imx6q
+ - description: i.MX6Q Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
+ items:
+ - const: kontron,imx6q-samx6i-ads2
+ - const: kontron,imx6q-samx6i
+ - const: fsl,imx6q
+
- description: i.MX6Q PHYTEC phyBOARD-Mira
items:
- enum:
@@ -544,6 +549,12 @@
- const: gw,ventana
- const: fsl,imx6dl
+ - description: i.MX6DL Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
+ items:
+ - const: kontron,imx6dl-samx6i-ads2
+ - const: kontron,imx6dl-samx6i
+ - const: fsl,imx6dl
+
- description: i.MX6DL PHYTEC phyBOARD-Mira
items:
- enum:
@@ -946,6 +957,13 @@
- prt,prt8mm # i.MX8MM Protonic PRT8MM Board
- const: fsl,imx8mm
+ - description: Compulab i.MX8MM UCM SoM based boards
+ items:
+ - enum:
+ - compulab,imx8mm-iot-gateway # i.MX8MM Compulab IoT-Gateway
+ - const: compulab,imx8mm-ucm-som # i.MX8MM Compulab UCM SoM
+ - const: fsl,imx8mm
+
- description: Emtop i.MX8MM based Boards
items:
- const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
@@ -1145,8 +1163,9 @@
version as an industrial computing device.
items:
- enum:
- - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
- - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+ - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+ - tq,imx8mp-tqma8mpql-mba8mp-ras314 # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MP-RAS314
+ - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
- const: fsl,imx8mp
- description: i.MX8MQ based Boards
@@ -1272,9 +1291,16 @@
- description: i.MX93 based Boards
items:
- enum:
+ - fsl,imx93-9x9-qsb # i.MX93 9x9 QSB Board
- fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board
- const: fsl,imx93
+ - description: i.MX95 based Boards
+ items:
+ - enum:
+ - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board
+ - const: fsl,imx95
+
- description: i.MXRT1050 based Boards
items:
- enum:
diff --git a/Bindings/arm/keystone/ti,sci.yaml b/Bindings/arm/keystone/ti,sci.yaml
index 7f06b10..25a2b42 100644
--- a/Bindings/arm/keystone/ti,sci.yaml
+++ b/Bindings/arm/keystone/ti,sci.yaml
@@ -20,7 +20,7 @@
initialized early into boot process and provides services to Operating Systems
on multiple processors including ones running Linux.
- See http://processors.wiki.ti.com/index.php/TISCI for protocol definition.
+ See https://software-dl.ti.com/tisci/esd/latest/index.html for protocol definition.
The TI-SCI node describes the Texas Instrument's System Controller entity node.
This parent node may optionally have additional children nodes which describe
diff --git a/Bindings/arm/marvell/armada-7k-8k.yaml b/Bindings/arm/marvell/armada-7k-8k.yaml
index 16d2e13..538d91b 100644
--- a/Bindings/arm/marvell/armada-7k-8k.yaml
+++ b/Bindings/arm/marvell/armada-7k-8k.yaml
@@ -82,4 +82,22 @@
- const: marvell,armada-ap807-quad
- const: marvell,armada-ap807
+ - description:
+ SolidRun CN9130 SoM based single-board computers
+ items:
+ - enum:
+ - solidrun,cn9130-clearfog-base
+ - solidrun,cn9130-clearfog-pro
+ - solidrun,cn9131-solidwan
+ - const: solidrun,cn9130-sr-som
+ - const: marvell,cn9130
+
+ - description:
+ SolidRun CN9132 COM-Express Type 7 based single-board computers
+ items:
+ - enum:
+ - solidrun,cn9132-clearfog
+ - const: solidrun,cn9132-sr-cex7
+ - const: marvell,cn9130
+
additionalProperties: true
diff --git a/Bindings/arm/marvell/marvell,dove.txt b/Bindings/arm/marvell/marvell,dove.txt
index aaaf64c..e10e852 100644
--- a/Bindings/arm/marvell/marvell,dove.txt
+++ b/Bindings/arm/marvell/marvell,dove.txt
@@ -5,18 +5,3 @@
Required root node property:
- compatible: must contain "marvell,dove";
-
-* Global Configuration registers
-
-Global Configuration registers of Dove SoC are shared by a syscon node.
-
-Required properties:
-- compatible: must contain "marvell,dove-global-config" and "syscon".
-- reg: base address and size of the Global Configuration registers.
-
-Example:
-
-gconf: global-config@e802c {
- compatible = "marvell,dove-global-config", "syscon";
- reg = <0xe802c 0x14>;
-};
diff --git a/Bindings/arm/mediatek.yaml b/Bindings/arm/mediatek.yaml
index 09f9ffd..1d4bb50 100644
--- a/Bindings/arm/mediatek.yaml
+++ b/Bindings/arm/mediatek.yaml
@@ -85,12 +85,15 @@
- const: mediatek,mt7629
- items:
- enum:
+ - cudy,wr3000-v1
+ - openwrt,one
- xiaomi,ax3000t
- const: mediatek,mt7981b
- items:
- enum:
- acelink,ew-7886cax
- bananapi,bpi-r3
+ - bananapi,bpi-r3mini
- mediatek,mt7986a-rfb
- const: mediatek,mt7986a
- items:
@@ -293,6 +296,13 @@
- const: google,tentacruel-sku327683
- const: google,tentacruel
- const: mediatek,mt8186
+ - description: Google Voltorb (Acer Chromebook 311 C723/C732T)
+ items:
+ - enum:
+ - google,voltorb-sku589824
+ - google,voltorb-sku589825
+ - const: google,voltorb
+ - const: mediatek,mt8186
- items:
- enum:
- mediatek,mt8186-evb
@@ -342,6 +352,14 @@
- const: google,tomato-rev3
- const: google,tomato
- const: mediatek,mt8195
+ - description: HP Dojo sku1, 3, 5, 7 (HP Chromebook x360 13b-ca0002sa)
+ items:
+ - const: google,dojo-sku7
+ - const: google,dojo-sku5
+ - const: google,dojo-sku3
+ - const: google,dojo-sku1
+ - const: google,dojo
+ - const: mediatek,mt8195
- items:
- enum:
- mediatek,mt8195-demo
@@ -353,6 +371,12 @@
- const: mediatek,mt8365
- items:
- enum:
+ - mediatek,mt8390-evk
+ - const: mediatek,mt8390
+ - const: mediatek,mt8188
+ - items:
+ - enum:
+ - kontron,3-5-sbc-i1200
- mediatek,mt8395-evk
- radxa,nio-12l
- const: mediatek,mt8395
diff --git a/Bindings/arm/pmu.yaml b/Bindings/arm/pmu.yaml
index 99b5e95..528544d 100644
--- a/Bindings/arm/pmu.yaml
+++ b/Bindings/arm/pmu.yaml
@@ -53,14 +53,20 @@
- arm,cortex-a710-pmu
- arm,cortex-a715-pmu
- arm,cortex-a720-pmu
+ - arm,cortex-a725-pmu
- arm,cortex-x1-pmu
- arm,cortex-x2-pmu
- arm,cortex-x3-pmu
- arm,cortex-x4-pmu
+ - arm,cortex-x925-pmu
- arm,neoverse-e1-pmu
- arm,neoverse-n1-pmu
- arm,neoverse-n2-pmu
+ - arm,neoverse-n3-pmu
- arm,neoverse-v1-pmu
+ - arm,neoverse-v2-pmu
+ - arm,neoverse-v3-pmu
+ - arm,neoverse-v3ae-pmu
- brcm,vulcan-pmu
- cavium,thunder-pmu
- nvidia,denver-pmu
diff --git a/Bindings/arm/qcom.yaml b/Bindings/arm/qcom.yaml
index ae88541..f08e13b 100644
--- a/Bindings/arm/qcom.yaml
+++ b/Bindings/arm/qcom.yaml
@@ -42,6 +42,7 @@
msm8996
msm8998
qcs404
+ qcs8550
qcm2290
qcm6490
qdu1000
@@ -96,6 +97,7 @@
- items:
- enum:
- qcom,apq8016-sbc
+ - schneider,apq8016-hmibsc
- const: qcom,apq8016
- items:
@@ -104,6 +106,7 @@
- huawei,sturgeon
- lg,lenok
- samsung,matisse-wifi
+ - samsung,milletwifi
- const: qcom,apq8026
- items:
@@ -138,6 +141,7 @@
- microsoft,makepeace
- microsoft,moneypenny
- motorola,falcon
+ - samsung,ms013g
- samsung,s3ve3g
- const: qcom,msm8226
@@ -175,6 +179,7 @@
- items:
- enum:
- lge,hammerhead
+ - samsung,hlte
- sony,xperia-amami
- sony,xperia-honami
- const: qcom,msm8974
@@ -182,8 +187,10 @@
- items:
- enum:
- fairphone,fp2
+ - htc,m8
- oneplus,bacon
- samsung,klte
+ - sony,xperia-aries
- sony,xperia-castor
- sony,xperia-leo
- const: qcom,msm8974pro
@@ -203,8 +210,13 @@
- asus,z00l
- gplus,fl8005a
- huawei,g7
+ - lg,c50
+ - lg,m216
- longcheer,l8910
- longcheer,l8150
+ - motorola,harpia
+ - motorola,osprey
+ - motorola,surnia
- qcom,msm8916-mtp
- samsung,a3u-eur
- samsung,a5u-eur
@@ -316,6 +328,7 @@
- items:
- enum:
- qcom,ipq5018-rdp432-c2
+ - tplink,archer-ax55-v1
- const: qcom,ipq5018
- items:
@@ -366,6 +379,7 @@
- fairphone,fp5
- qcom,qcm6490-idp
- qcom,qcs6490-rb3gen2
+ - shift,otter
- const: qcom,qcm6490
- description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
@@ -802,6 +816,7 @@
- items:
- enum:
+ - lenovo,tbx605f
- motorola,ali
- const: qcom,sdm450
@@ -883,6 +898,7 @@
- items:
- enum:
- qcom,sa8775p-ride
+ - qcom,sa8775p-ride-r3
- const: qcom,sa8775p
- items:
@@ -1004,17 +1020,28 @@
- qcom,sm8550-hdk
- qcom,sm8550-mtp
- qcom,sm8550-qrd
+ - samsung,q5q
- sony,pdx234
- const: qcom,sm8550
- items:
- enum:
+ - qcom,qcs8550-aim300-aiot
+ - const: qcom,qcs8550-aim300
+ - const: qcom,qcs8550
+ - const: qcom,sm8550
+
+ - items:
+ - enum:
+ - qcom,sm8650-hdk
- qcom,sm8650-mtp
- qcom,sm8650-qrd
- const: qcom,sm8650
- items:
- enum:
+ - asus,vivobook-s15
+ - lenovo,yoga-slim7x
- qcom,x1e80100-crd
- qcom,x1e80100-qcp
- const: qcom,x1e80100
diff --git a/Bindings/arm/rockchip.yaml b/Bindings/arm/rockchip.yaml
index e04c213..1ef09fb 100644
--- a/Bindings/arm/rockchip.yaml
+++ b/Bindings/arm/rockchip.yaml
@@ -248,6 +248,13 @@
- const: friendlyarm,nanopc-t6
- const: rockchip,rk3588
+ - description: FriendlyElec CM3588-based boards
+ items:
+ - enum:
+ - friendlyarm,cm3588-nas
+ - const: friendlyarm,cm3588
+ - const: rockchip,rk3588
+
- description: GameForce Chi
items:
- const: gameforce,chi
@@ -627,6 +634,11 @@
- const: mqmaker,miqi
- const: rockchip,rk3288
+ - description: Neardi LBA3368
+ items:
+ - const: neardi,lba3368
+ - const: rockchip,rk3368
+
- description: Netxeon R89 board
items:
- const: netxeon,r89
@@ -799,11 +811,21 @@
- const: radxa,rock3a
- const: rockchip,rk3568
+ - description: Radxa ROCK 3B
+ items:
+ - const: radxa,rock-3b
+ - const: rockchip,rk3568
+
- description: Radxa ROCK 3C
items:
- const: radxa,rock-3c
- const: rockchip,rk3566
+ - description: Radxa ROCK 5 ITX
+ items:
+ - const: radxa,rock-5-itx
+ - const: rockchip,rk3588
+
- description: Radxa ROCK 5A
items:
- const: radxa,rock-5a
@@ -814,6 +836,18 @@
- const: radxa,rock-5b
- const: rockchip,rk3588
+ - description: Radxa ROCK S0
+ items:
+ - const: radxa,rock-s0
+ - const: rockchip,rk3308
+
+ - description: Radxa ZERO 3W/3E
+ items:
+ - enum:
+ - radxa,zero-3e
+ - radxa,zero-3w
+ - const: rockchip,rk3566
+
- description: Rikomagic MK808 v1
items:
- const: rikomagic,mk808
@@ -959,6 +993,14 @@
- const: wolfvision,rk3568-pf5
- const: rockchip,rk3568
+ - description: Xunlong Orange Pi 3B
+ items:
+ - enum:
+ - xunlong,orangepi-3b-v1.1
+ - xunlong,orangepi-3b-v2.1
+ - const: xunlong,orangepi-3b
+ - const: rockchip,rk3566
+
- description: Xunlong Orange Pi 5 Plus
items:
- const: xunlong,orangepi-5-plus
diff --git a/Bindings/arm/rtsm-dcscb.txt b/Bindings/arm/rtsm-dcscb.txt
deleted file mode 100644
index 3b8fbf3..0000000
--- a/Bindings/arm/rtsm-dcscb.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ARM Dual Cluster System Configuration Block
--------------------------------------------
-
-The Dual Cluster System Configuration Block (DCSCB) provides basic
-functionality for controlling clocks, resets and configuration pins in
-the Dual Cluster System implemented by the Real-Time System Model (RTSM).
-
-Required properties:
-
-- compatible : should be "arm,rtsm,dcscb"
-
-- reg : physical base address and the size of the registers window
-
-Example:
-
- dcscb@60000000 {
- compatible = "arm,rtsm,dcscb";
- reg = <0x60000000 0x1000>;
- };
diff --git a/Bindings/arm/spear-misc.txt b/Bindings/arm/spear-misc.txt
deleted file mode 100644
index e404e25..0000000
--- a/Bindings/arm/spear-misc.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-SPEAr Misc configuration
-===========================
-SPEAr SOCs have some miscellaneous registers which are used to configure
-few properties of different peripheral controllers.
-
-misc node required properties:
-
-- compatible Should be "st,spear1340-misc", "syscon".
-- reg: Address range of misc space up to 8K
diff --git a/Bindings/arm/stm32/stm32.yaml b/Bindings/arm/stm32/stm32.yaml
index bc2f433..5809994 100644
--- a/Bindings/arm/stm32/stm32.yaml
+++ b/Bindings/arm/stm32/stm32.yaml
@@ -59,6 +59,12 @@
- prt,prtt1s # Protonic PRTT1S
- const: st,stm32mp151
+ - description: DH STM32MP135 DHCOR SoM based Boards
+ items:
+ - const: dh,stm32mp135f-dhcor-dhsbc
+ - const: dh,stm32mp135f-dhcor-som
+ - const: st,stm32mp135
+
- description: DH STM32MP151 DHCOR SoM based Boards
items:
- const: dh,stm32mp151a-dhcor-testbench
diff --git a/Bindings/arm/sunxi.yaml b/Bindings/arm/sunxi.yaml
index c2a158b..09dc6f4 100644
--- a/Bindings/arm/sunxi.yaml
+++ b/Bindings/arm/sunxi.yaml
@@ -708,12 +708,12 @@
- const: olimex,a64-teres-i
- const: allwinner,sun50i-a64
- - description: Pine64
+ - description: Pine64 PINE A64
items:
- const: pine64,pine64
- const: allwinner,sun50i-a64
- - description: Pine64+
+ - description: Pine64 PINE A64+
items:
- const: pine64,pine64-plus
- const: allwinner,sun50i-a64
@@ -724,17 +724,17 @@
- const: sochip,s3
- const: allwinner,sun8i-v3
- - description: Pine64 PineH64 model A
+ - description: Pine64 PINE H64 Model A
items:
- const: pine64,pine-h64
- const: allwinner,sun50i-h6
- - description: Pine64 PineH64 model B
+ - description: Pine64 PINE H64 Model B
items:
- const: pine64,pine-h64-model-b
- const: allwinner,sun50i-h6
- - description: Pine64 LTS
+ - description: Pine64 PINE A64 LTS
items:
- const: pine64,pine64-lts
- const: allwinner,sun50i-r18
@@ -763,17 +763,17 @@
- const: pine64,pinephone
- const: allwinner,sun50i-a64
- - description: Pine64 PineTab, Development Sample
+ - description: Pine64 PineTab Developer Sample
items:
- const: pine64,pinetab
- const: allwinner,sun50i-a64
- - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+ - description: Pine64 PineTab Early Adopter
items:
- const: pine64,pinetab-early-adopter
- const: allwinner,sun50i-a64
- - description: Pine64 SoPine Baseboard
+ - description: Pine64 SOPINE
items:
- const: pine64,sopine-baseboard
- const: pine64,sopine
diff --git a/Bindings/arm/ti/k3.yaml b/Bindings/arm/ti/k3.yaml
index 52b51fd..4d9c5fb 100644
--- a/Bindings/arm/ti/k3.yaml
+++ b/Bindings/arm/ti/k3.yaml
@@ -25,6 +25,12 @@
- ti,am62a7-sk
- const: ti,am62a7
+ - description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra
+ items:
+ - const: phytec,am62a7-phyboard-lyra-rdk
+ - const: phytec,am62a-phycore-som
+ - const: ti,am62a7
+
- description: K3 AM62P5 SoC and Boards
items:
- enum:
diff --git a/Bindings/ata/ahci-fsl-qoriq.txt b/Bindings/ata/ahci-fsl-qoriq.txt
deleted file mode 100644
index 7c3ca0e..0000000
--- a/Bindings/ata/ahci-fsl-qoriq.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for Freescale QorIQ AHCI SATA Controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register area.
- - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
- chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
- - clocks: Input clock specifier. Refer to common clock bindings.
- - interrupts: Interrupt specifier. Refer to interrupt binding.
-
-Optional properties:
- - dma-coherent: Enable AHCI coherent DMA operation.
- - reg-names: register area names when there are more than 1 register area.
-
-Examples:
- sata@3200000 {
- compatible = "fsl,ls1021a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
- dma-coherent;
- };
diff --git a/Bindings/ata/fsl,ahci.yaml b/Bindings/ata/fsl,ahci.yaml
new file mode 100644
index 0000000..ea4428b
--- /dev/null
+++ b/Bindings/ata/fsl,ahci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ AHCI SATA Controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - description: SATA controller for ls1012a
+ items:
+ - const: fsl,ls1012a-ahci
+ - const: fsl,ls1043a-ahci
+ - enum:
+ - fsl,ls1021a-ahci
+ - fsl,ls1028a-ahci
+ - fsl,ls1043a-ahci
+ - fsl,ls1046a-ahci
+ - fsl,ls1088a-ahci
+ - fsl,ls2080a-ahci
+ - fsl,lx2160a-ahci
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: ahci
+ - const: sata-ecc
+ minItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sata@3200000 {
+ compatible = "fsl,ls1021a-ahci";
+ reg = <0x3200000 0x10000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ dma-coherent;
+ };
diff --git a/Bindings/cache/qcom,llcc.yaml b/Bindings/cache/qcom,llcc.yaml
index b9a9f2c..68ea5f7 100644
--- a/Bindings/cache/qcom,llcc.yaml
+++ b/Bindings/cache/qcom,llcc.yaml
@@ -21,6 +21,7 @@
compatible:
enum:
- qcom,qdu1000-llcc
+ - qcom,sa8775p-llcc
- qcom,sc7180-llcc
- qcom,sc7280-llcc
- qcom,sc8180x-llcc
@@ -84,6 +85,33 @@
compatible:
contains:
enum:
+ - qcom,sa8775p-llcc
+ then:
+ properties:
+ reg:
+ items:
+ - description: LLCC0 base register region
+ - description: LLCC1 base register region
+ - description: LLCC2 base register region
+ - description: LLCC3 base register region
+ - description: LLCC4 base register region
+ - description: LLCC5 base register region
+ - description: LLCC broadcast base register region
+ reg-names:
+ items:
+ - const: llcc0_base
+ - const: llcc1_base
+ - const: llcc2_base
+ - const: llcc3_base
+ - const: llcc4_base
+ - const: llcc5_base
+ - const: llcc_broadcast_base
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,sc7280-llcc
then:
properties:
@@ -141,8 +169,6 @@
- qcom,sm8150-llcc
- qcom,sm8250-llcc
- qcom,sm8350-llcc
- - qcom,sm8450-llcc
- - qcom,sm8550-llcc
then:
properties:
reg:
@@ -160,6 +186,33 @@
- const: llcc3_base
- const: llcc_broadcast_base
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8450-llcc
+ - qcom,sm8550-llcc
+ - qcom,sm8650-llcc
+ then:
+ properties:
+ reg:
+ items:
+ - description: LLCC0 base register region
+ - description: LLCC1 base register region
+ - description: LLCC2 base register region
+ - description: LLCC3 base register region
+ - description: LLCC broadcast OR register region
+ - description: LLCC broadcast AND register region
+ reg-names:
+ items:
+ - const: llcc0_base
+ - const: llcc1_base
+ - const: llcc2_base
+ - const: llcc3_base
+ - const: llcc_broadcast_base
+ - const: llcc_broadcast_and_base
+
additionalProperties: false
examples:
diff --git a/Bindings/cache/starfive,jh8100-starlink-cache.yaml b/Bindings/cache/starfive,jh8100-starlink-cache.yaml
new file mode 100644
index 0000000..6d61098
--- /dev/null
+++ b/Bindings/cache/starfive,jh8100-starlink-cache.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/starfive,jh8100-starlink-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive StarLink Cache Controller
+
+maintainers:
+ - Joshua Yeong <joshua.yeong@starfivetech.com>
+
+description:
+ StarFive's StarLink Cache Controller manages the L3 cache shared between
+ clusters of CPU cores. The cache driver enables RISC-V non-standard cache
+ management as an alternative to instructions in the RISC-V Zicbom extension.
+
+allOf:
+ - $ref: /schemas/cache-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'cache'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - starfive,jh8100-starlink-cache
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: starfive,jh8100-starlink-cache
+ - const: cache
+
+ reg:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - cache-block-size
+ - cache-level
+ - cache-sets
+ - cache-size
+ - cache-unified
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cache-controller@15000000 {
+ compatible = "starfive,jh8100-starlink-cache", "cache";
+ reg = <0x0 0x15000000 0x0 0x278>;
+ cache-block-size = <64>;
+ cache-level = <3>;
+ cache-sets = <8192>;
+ cache-size = <0x400000>;
+ cache-unified;
+ };
+ };
diff --git a/Bindings/clock/airoha,en7523-scu.yaml b/Bindings/clock/airoha,en7523-scu.yaml
index 3f42666..84353fd 100644
--- a/Bindings/clock/airoha,en7523-scu.yaml
+++ b/Bindings/clock/airoha,en7523-scu.yaml
@@ -35,7 +35,7 @@
reg:
minItems: 2
- maxItems: 3
+ maxItems: 4
"#clock-cells":
description:
@@ -43,6 +43,10 @@
clocks.
const: 1
+ '#reset-cells':
+ description: ID of the controller reset line
+ const: 1
+
required:
- compatible
- reg
@@ -60,6 +64,8 @@
- description: scu base address
- description: misc scu base address
+ '#reset-cells': false
+
- if:
properties:
compatible:
@@ -70,6 +76,7 @@
items:
- description: scu base address
- description: misc scu base address
+ - description: reset base address
- description: pb scu base address
additionalProperties: false
@@ -83,3 +90,19 @@
<0x1fb00000 0x1000>;
#clock-cells = <1>;
};
+
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ scuclk: clock-controller@1fa20000 {
+ compatible = "airoha,en7581-scu";
+ reg = <0x0 0x1fa20000 0x0 0x400>,
+ <0x0 0x1fb00000 0x0 0x90>,
+ <0x0 0x1fb00830 0x0 0x8>,
+ <0x0 0x1fbe3400 0x0 0xfc>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
diff --git a/Bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
index 6d84cee..2568ad7 100644
--- a/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
+++ b/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -30,6 +30,8 @@
- description: input fixed pll div7
- description: input hifi pll
- description: input oscillator (usually at 24MHz)
+ - description: input sys pll
+ minItems: 6 # sys_pll is optional
clock-names:
items:
@@ -39,6 +41,8 @@
- const: fclk_div7
- const: hifi_pll
- const: xtal
+ - const: sys_pll
+ minItems: 6 # sys_pll is optional
required:
- compatible
@@ -65,9 +69,10 @@
<&clkc_pll CLKID_FCLK_DIV5>,
<&clkc_pll CLKID_FCLK_DIV7>,
<&clkc_pll CLKID_HIFI_PLL>,
- <&xtal>;
+ <&xtal>,
+ <&clkc_pll CLKID_SYS_PLL>;
clock-names = "fclk_div2", "fclk_div3",
"fclk_div5", "fclk_div7",
- "hifi_pll", "xtal";
+ "hifi_pll", "xtal", "sys_pll";
};
};
diff --git a/Bindings/clock/amlogic,a1-pll-clkc.yaml b/Bindings/clock/amlogic,a1-pll-clkc.yaml
index a59b188..c99274d 100644
--- a/Bindings/clock/amlogic,a1-pll-clkc.yaml
+++ b/Bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -26,11 +26,15 @@
items:
- description: input fixpll_in
- description: input hifipll_in
+ - description: input syspll_in
+ minItems: 2 # syspll_in is optional
clock-names:
items:
- const: fixpll_in
- const: hifipll_in
+ - const: syspll_in
+ minItems: 2 # syspll_in is optional
required:
- compatible
@@ -53,7 +57,8 @@
reg = <0 0x7c80 0 0x18c>;
#clock-cells = <1>;
clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
- <&clkc_periphs CLKID_HIFIPLL_IN>;
- clock-names = "fixpll_in", "hifipll_in";
+ <&clkc_periphs CLKID_HIFIPLL_IN>,
+ <&clkc_periphs CLKID_SYSPLL_IN>;
+ clock-names = "fixpll_in", "hifipll_in", "syspll_in";
};
};
diff --git a/Bindings/clock/amlogic,axg-audio-clkc.txt b/Bindings/clock/amlogic,axg-audio-clkc.txt
deleted file mode 100644
index 3a8948c..0000000
--- a/Bindings/clock/amlogic,axg-audio-clkc.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Amlogic AXG Audio Clock Controllers
-
-The Amlogic AXG audio clock controller generates and supplies clock to the
-other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
-devices.
-
-Required Properties:
-
-- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D,
- "amlogic,g12a-audio-clkc" for G12A,
- "amlogic,sm1-audio-clkc" for S905X3.
-- reg : physical base address of the clock controller and length of
- memory mapped region.
-- clocks : a list of phandle + clock-specifier pairs for the clocks listed
- in clock-names.
-- clock-names : must contain the following:
- * "pclk" - Main peripheral bus clock
- may contain the following:
- * "mst_in[0-7]" - 8 input plls to generate clock signals
- * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
- components.
- * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
- components.
-- resets : phandle of the internal reset line
-- #clock-cells : should be 1.
-- #reset-cells : should be 1 on the g12a (and following) soc family
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
-used in device tree sources.
-
-Example:
-
-clkc_audio: clock-controller@0 {
- compatible = "amlogic,axg-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_GP0_PLL>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
- resets = <&reset RESET_AUDIO>;
-};
diff --git a/Bindings/clock/amlogic,axg-audio-clkc.yaml b/Bindings/clock/amlogic,axg-audio-clkc.yaml
new file mode 100644
index 0000000..fd7982d
--- /dev/null
+++ b/Bindings/clock/amlogic,axg-audio-clkc.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,axg-audio-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio Clock Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+ The Amlogic AXG audio clock controller generates and supplies clock to the
+ other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+ devices.
+
+properties:
+ compatible:
+ enum:
+ - amlogic,axg-audio-clkc
+ - amlogic,g12a-audio-clkc
+ - amlogic,sm1-audio-clkc
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: main peripheral bus clock
+ - description: input plls to generate clock signals N0
+ - description: input plls to generate clock signals N1
+ - description: input plls to generate clock signals N2
+ - description: input plls to generate clock signals N3
+ - description: input plls to generate clock signals N4
+ - description: input plls to generate clock signals N5
+ - description: input plls to generate clock signals N6
+ - description: input plls to generate clock signals N7
+ - description: slave bit clock N0 provided by external components
+ - description: slave bit clock N1 provided by external components
+ - description: slave bit clock N2 provided by external components
+ - description: slave bit clock N3 provided by external components
+ - description: slave bit clock N4 provided by external components
+ - description: slave bit clock N5 provided by external components
+ - description: slave bit clock N6 provided by external components
+ - description: slave bit clock N7 provided by external components
+ - description: slave bit clock N8 provided by external components
+ - description: slave bit clock N9 provided by external components
+ - description: slave sample clock N0 provided by external components
+ - description: slave sample clock N1 provided by external components
+ - description: slave sample clock N2 provided by external components
+ - description: slave sample clock N3 provided by external components
+ - description: slave sample clock N4 provided by external components
+ - description: slave sample clock N5 provided by external components
+ - description: slave sample clock N6 provided by external components
+ - description: slave sample clock N7 provided by external components
+ - description: slave sample clock N8 provided by external components
+ - description: slave sample clock N9 provided by external components
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: pclk
+ - const: mst_in0
+ - const: mst_in1
+ - const: mst_in2
+ - const: mst_in3
+ - const: mst_in4
+ - const: mst_in5
+ - const: mst_in6
+ - const: mst_in7
+ - const: slv_sclk0
+ - const: slv_sclk1
+ - const: slv_sclk2
+ - const: slv_sclk3
+ - const: slv_sclk4
+ - const: slv_sclk5
+ - const: slv_sclk6
+ - const: slv_sclk7
+ - const: slv_sclk8
+ - const: slv_sclk9
+ - const: slv_lrclk0
+ - const: slv_lrclk1
+ - const: slv_lrclk2
+ - const: slv_lrclk3
+ - const: slv_lrclk4
+ - const: slv_lrclk5
+ - const: slv_lrclk6
+ - const: slv_lrclk7
+ - const: slv_lrclk8
+ - const: slv_lrclk9
+
+ resets:
+ description: internal reset line
+
+required:
+ - compatible
+ - '#clock-cells'
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,g12a-audio-clkc
+ - amlogic,sm1-audio-clkc
+ then:
+ required:
+ - '#reset-cells'
+ else:
+ properties:
+ '#reset-cells': false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/axg-clkc.h>
+ #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clkc_audio: clock-controller@0 {
+ compatible = "amlogic,axg-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>,
+ <&slv_sclk0>,
+ <&slv_sclk1>,
+ <&slv_sclk2>,
+ <&slv_sclk3>,
+ <&slv_sclk4>,
+ <&slv_sclk5>,
+ <&slv_sclk6>,
+ <&slv_sclk7>,
+ <&slv_sclk8>,
+ <&slv_sclk9>,
+ <&slv_lrclk0>,
+ <&slv_lrclk1>,
+ <&slv_lrclk2>,
+ <&slv_lrclk3>,
+ <&slv_lrclk4>,
+ <&slv_lrclk5>,
+ <&slv_lrclk6>,
+ <&slv_lrclk7>,
+ <&slv_lrclk8>,
+ <&slv_lrclk9>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7",
+ "slv_sclk0",
+ "slv_sclk1",
+ "slv_sclk2",
+ "slv_sclk3",
+ "slv_sclk4",
+ "slv_sclk5",
+ "slv_sclk6",
+ "slv_sclk7",
+ "slv_sclk8",
+ "slv_sclk9",
+ "slv_lrclk0",
+ "slv_lrclk1",
+ "slv_lrclk2",
+ "slv_lrclk3",
+ "slv_lrclk4",
+ "slv_lrclk5",
+ "slv_lrclk6",
+ "slv_lrclk7",
+ "slv_lrclk8",
+ "slv_lrclk9";
+ resets = <&reset RESET_AUDIO>;
+ };
+ };
diff --git a/Bindings/clock/amlogic,c3-peripherals-clkc.yaml b/Bindings/clock/amlogic,c3-peripherals-clkc.yaml
new file mode 100644
index 0000000..98e30b8
--- /dev/null
+++ b/Bindings/clock/amlogic,c3-peripherals-clkc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,c3-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 series Peripheral Clock Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Jerome Brunet <jbrunet@baylibre.com>
+ - Xianwei Zhao <xianwei.zhao@amlogic.com>
+ - Chuan Liu <chuan.liu@amlogic.com>
+
+properties:
+ compatible:
+ const: amlogic,c3-peripherals-clkc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 16
+ items:
+ - description: input oscillator (usually at 24MHz)
+ - description: input oscillators multiplexer
+ - description: input fix pll
+ - description: input fclk div 2
+ - description: input fclk div 2p5
+ - description: input fclk div 3
+ - description: input fclk div 4
+ - description: input fclk div 5
+ - description: input fclk div 7
+ - description: input gp0 pll
+ - description: input gp1 pll
+ - description: input hifi pll
+ - description: input sys clk
+ - description: input axi clk
+ - description: input sys pll div 16
+ - description: input cpu clk div 16
+ - description: input pad clock for rtc clk (optional)
+
+ clock-names:
+ minItems: 16
+ items:
+ - const: xtal_24m
+ - const: oscin
+ - const: fix
+ - const: fdiv2
+ - const: fdiv2p5
+ - const: fdiv3
+ - const: fdiv4
+ - const: fdiv5
+ - const: fdiv7
+ - const: gp0
+ - const: gp1
+ - const: hifi
+ - const: sysclk
+ - const: axiclk
+ - const: sysplldiv16
+ - const: cpudiv16
+ - const: pad_osc
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@0 {
+ compatible = "amlogic,c3-peripherals-clkc";
+ reg = <0x0 0x0 0x0 0x49c>;
+ #clock-cells = <1>;
+ clocks = <&xtal_24m>,
+ <&scmi_clk 8>,
+ <&scmi_clk 12>,
+ <&clkc_pll 3>,
+ <&clkc_pll 5>,
+ <&clkc_pll 7>,
+ <&clkc_pll 9>,
+ <&clkc_pll 11>,
+ <&clkc_pll 13>,
+ <&clkc_pll 15>,
+ <&scmi_clk 13>,
+ <&clkc_pll 17>,
+ <&scmi_clk 9>,
+ <&scmi_clk 10>,
+ <&scmi_clk 14>,
+ <&scmi_clk 15>;
+ clock-names = "xtal_24m",
+ "oscin",
+ "fix",
+ "fdiv2",
+ "fdiv2p5",
+ "fdiv3",
+ "fdiv4",
+ "fdiv5",
+ "fdiv7",
+ "gp0",
+ "gp1",
+ "hifi",
+ "sysclk",
+ "axiclk",
+ "sysplldiv16",
+ "cpudiv16";
+ };
+ };
diff --git a/Bindings/clock/amlogic,c3-pll-clkc.yaml b/Bindings/clock/amlogic,c3-pll-clkc.yaml
new file mode 100644
index 0000000..43de3c6
--- /dev/null
+++ b/Bindings/clock/amlogic,c3-pll-clkc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,c3-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 series PLL Clock Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Jerome Brunet <jbrunet@baylibre.com>
+ - Chuan Liu <chuan.liu@amlogic.com>
+ - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+properties:
+ compatible:
+ const: amlogic,c3-pll-clkc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: input top pll
+ - description: input mclk pll
+
+ clock-names:
+ items:
+ - const: top
+ - const: mclk
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@8000 {
+ compatible = "amlogic,c3-pll-clkc";
+ reg = <0x0 0x8000 0x0 0x1a4>;
+ clocks = <&scmi_clk 2>,
+ <&scmi_clk 5>;
+ clock-names = "top", "mclk";
+ #clock-cells = <1>;
+ };
+ };
diff --git a/Bindings/clock/fsl,qoriq-clock-legacy.yaml b/Bindings/clock/fsl,qoriq-clock-legacy.yaml
new file mode 100644
index 0000000..97b96a1
--- /dev/null
+++ b/Bindings/clock/fsl,qoriq-clock-legacy.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ These nodes are deprecated. Kernels should continue to support
+ device trees with these nodes, but new device trees should not use them.
+
+ Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+ compatible:
+ enum:
+ - fsl,qoriq-core-pll-1.0
+ - fsl,qoriq-core-pll-2.0
+ - fsl,qoriq-core-mux-1.0
+ - fsl,qoriq-core-mux-2.0
+ - fsl,qoriq-sysclk-1.0
+ - fsl,qoriq-sysclk-2.0
+ - fsl,qoriq-platform-pll-1.0
+ - fsl,qoriq-platform-pll-2.0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 8
+
+ '#clock-cells':
+ minimum: 0
+ maximum: 1
+
+required:
+ - compatible
+ - '#clock-cells'
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,qoriq-sysclk-1.0
+ - fsl,qoriq-sysclk-2.0
+ then:
+ properties:
+ '#clock-cells':
+ const: 0
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,qoriq-core-pll-1.0
+ - fsl,qoriq-core-pll-2.0
+ then:
+ properties:
+ '#clock-cells':
+ const: 1
+ description: |
+ * 0 - equal to the PLL frequency
+ * 1 - equal to the PLL frequency divided by 2
+ * 2 - equal to the PLL frequency divided by 4
+
diff --git a/Bindings/clock/fsl,qoriq-clock.yaml b/Bindings/clock/fsl,qoriq-clock.yaml
new file mode 100644
index 0000000..95a3e3b
--- /dev/null
+++ b/Bindings/clock/fsl,qoriq-clock.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ Freescale QorIQ chips take primary clocking input from the external
+ SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+ multiple phase locked loops (PLL) to create a variety of frequencies
+ which can then be passed to a variety of internal logic, including
+ cores and peripheral IP blocks.
+ Please refer to the Reference Manual for details.
+
+ All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+ which the chip complies.
+
+ Chassis Version Example Chips
+ --------------- -------------
+ 1.0 p4080, p5020, p5040
+ 2.0 t4240
+
+ Clock Provider
+
+ The clockgen node should act as a clock provider, though in older device
+ trees the children of the clockgen node are the clock providers.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,p2041-clockgen
+ - fsl,p3041-clockgen
+ - fsl,p4080-clockgen
+ - fsl,p5020-clockgen
+ - fsl,p5040-clockgen
+ - const: fsl,qoriq-clockgen-1.0
+ - items:
+ - enum:
+ - fsl,t1023-clockgen
+ - fsl,t1024-clockgen
+ - fsl,t1040-clockgen
+ - fsl,t1042-clockgen
+ - fsl,t2080-clockgen
+ - fsl,t2081-clockgen
+ - fsl,t4240-clockgen
+ - const: fsl,qoriq-clockgen-2.0
+ - items:
+ - enum:
+ - fsl,b4420-clockgen
+ - fsl,b4860-clockgen
+ - const: fsl,b4-clockgen
+ - items:
+ - enum:
+ - fsl,ls1012a-clockgen
+ - fsl,ls1021a-clockgen
+ - fsl,ls1028a-clockgen
+ - fsl,ls1043a-clockgen
+ - fsl,ls1046a-clockgen
+ - fsl,ls1088a-clockgen
+ - fsl,ls2080a-clockgen
+ - fsl,lx2160a-clockgen
+
+ reg:
+ maxItems: 1
+
+ ranges: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ '#clock-cells':
+ const: 2
+ description: |
+ The first cell of the clock specifier is the clock type, and the
+ second cell is the clock index for the specified type.
+
+ Type# Name Index Cell
+ 0 sysclk must be 0
+ 1 cmux index (n in CLKCnCSR)
+ 2 hwaccel index (n in CLKCGnHWACSR)
+ 3 fman 0 for fm1, 1 for fm2
+ 4 platform pll n=pll/(n+1). For example, when n=1,
+ that means output_freq=PLL_freq/2.
+ 5 coreclk must be 0
+
+ clock-frequency:
+ description: Input system clock frequency (SYSCLK)
+
+ clocks:
+ items:
+ - description:
+ sysclk may be provided as an input clock. Either clock-frequency
+ or clocks must be provided.
+ - description:
+ A second input clock, called "coreclk", may be provided if
+ core PLLs are based on a different input clock from the
+ platform PLL.
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: sysclk
+ - const: coreclk
+
+patternProperties:
+ '^mux[0-9]@[a-f0-9]+$':
+ deprecated: true
+ $ref: fsl,qoriq-clock-legacy.yaml
+
+ '^sysclk(-[a-z0-9]+)?$':
+ deprecated: true
+ $ref: fsl,qoriq-clock-legacy.yaml
+
+ '^pll[0-9]@[a-f0-9]+$':
+ deprecated: true
+ $ref: fsl,qoriq-clock-legacy.yaml
+
+ '^platform\-pll@[a-f0-9]+$':
+ deprecated: true
+ $ref: fsl,qoriq-clock-legacy.yaml
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ /* clock provider example */
+ global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <133333333>;
+ #clock-cells = <2>;
+ };
+
+ - |
+ /* Legacy example */
+ global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ ranges = <0x0 0xe1000 0x1000>;
+ clock-frequency = <133333333>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #clock-cells = <2>;
+
+ sysclk: sysclk {
+ compatible = "fsl,qoriq-sysclk-1.0";
+ clock-output-names = "sysclk";
+ #clock-cells = <0>;
+ };
+
+ pll0: pll0@800 {
+ compatible = "fsl,qoriq-core-pll-1.0";
+ reg = <0x800 0x4>;
+ #clock-cells = <1>;
+ clocks = <&sysclk>;
+ clock-output-names = "pll0", "pll0-div2";
+ };
+
+ pll1: pll1@820 {
+ compatible = "fsl,qoriq-core-pll-1.0";
+ reg = <0x820 0x4>;
+ #clock-cells = <1>;
+ clocks = <&sysclk>;
+ clock-output-names = "pll1", "pll1-div2";
+ };
+
+ mux0: mux0@0 {
+ compatible = "fsl,qoriq-core-mux-1.0";
+ reg = <0x0 0x4>;
+ #clock-cells = <0>;
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux0";
+ };
+
+ mux1: mux1@20 {
+ compatible = "fsl,qoriq-core-mux-1.0";
+ reg = <0x20 0x4>;
+ #clock-cells = <0>;
+ clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+ clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+ clock-output-names = "cmux1";
+ };
+
+ platform-pll@c00 {
+ #clock-cells = <1>;
+ reg = <0xc00 0x4>;
+ compatible = "fsl,qoriq-platform-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "platform-pll", "platform-pll-div2";
+ };
+ };
diff --git a/Bindings/clock/imx6q-clock.yaml b/Bindings/clock/imx6q-clock.yaml
index bae4fcb..cd3c04c 100644
--- a/Bindings/clock/imx6q-clock.yaml
+++ b/Bindings/clock/imx6q-clock.yaml
@@ -7,7 +7,8 @@
title: Freescale i.MX6 Quad Clock Controller
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Abel Vesa <abelvesa@kernel.org>
+ - Peng Fan <peng.fan@nxp.com>
properties:
compatible:
diff --git a/Bindings/clock/imx6sl-clock.yaml b/Bindings/clock/imx6sl-clock.yaml
index c85ff6e..6713bbb 100644
--- a/Bindings/clock/imx6sl-clock.yaml
+++ b/Bindings/clock/imx6sl-clock.yaml
@@ -7,7 +7,8 @@
title: Freescale i.MX6 SoloLite Clock Controller
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Abel Vesa <abelvesa@kernel.org>
+ - Peng Fan <peng.fan@nxp.com>
properties:
compatible:
diff --git a/Bindings/clock/imx6sll-clock.yaml b/Bindings/clock/imx6sll-clock.yaml
index 6b549ed..6d64cf9 100644
--- a/Bindings/clock/imx6sll-clock.yaml
+++ b/Bindings/clock/imx6sll-clock.yaml
@@ -7,7 +7,8 @@
title: Freescale i.MX6 SLL Clock Controller
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Abel Vesa <abelvesa@kernel.org>
+ - Peng Fan <peng.fan@nxp.com>
properties:
compatible:
diff --git a/Bindings/clock/imx6sx-clock.yaml b/Bindings/clock/imx6sx-clock.yaml
index 55dcad1..77afa4b 100644
--- a/Bindings/clock/imx6sx-clock.yaml
+++ b/Bindings/clock/imx6sx-clock.yaml
@@ -7,7 +7,8 @@
title: Freescale i.MX6 SoloX Clock Controller
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Abel Vesa <abelvesa@kernel.org>
+ - Peng Fan <peng.fan@nxp.com>
properties:
compatible:
diff --git a/Bindings/clock/imx6ul-clock.yaml b/Bindings/clock/imx6ul-clock.yaml
index be54d4d..d57e18a 100644
--- a/Bindings/clock/imx6ul-clock.yaml
+++ b/Bindings/clock/imx6ul-clock.yaml
@@ -7,7 +7,8 @@
title: Freescale i.MX6 UltraLite Clock Controller
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Abel Vesa <abelvesa@kernel.org>
+ - Peng Fan <peng.fan@nxp.com>
properties:
compatible:
diff --git a/Bindings/clock/imx7d-clock.yaml b/Bindings/clock/imx7d-clock.yaml
index e7d8427..880d602 100644
--- a/Bindings/clock/imx7d-clock.yaml
+++ b/Bindings/clock/imx7d-clock.yaml
@@ -8,7 +8,6 @@
maintainers:
- Frank Li <Frank.Li@nxp.com>
- - Anson Huang <Anson.Huang@nxp.com>
description: |
The clock consumer should specify the desired clock by having the clock
diff --git a/Bindings/clock/imx8m-clock.yaml b/Bindings/clock/imx8m-clock.yaml
index 80539f8..c643d4a 100644
--- a/Bindings/clock/imx8m-clock.yaml
+++ b/Bindings/clock/imx8m-clock.yaml
@@ -7,7 +7,8 @@
title: NXP i.MX8M Family Clock Control Module
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Abel Vesa <abelvesa@kernel.org>
+ - Peng Fan <peng.fan@nxp.com>
description: |
NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
diff --git a/Bindings/clock/mediatek,mt7622-pciesys.yaml b/Bindings/clock/mediatek,mt7622-pciesys.yaml
index c77111d..9c3913f 100644
--- a/Bindings/clock/mediatek,mt7622-pciesys.yaml
+++ b/Bindings/clock/mediatek,mt7622-pciesys.yaml
@@ -14,9 +14,11 @@
properties:
compatible:
- enum:
- - mediatek,mt7622-pciesys
- - mediatek,mt7629-pciesys
+ oneOf:
+ - items:
+ - const: mediatek,mt7622-pciesys
+ - const: syscon
+ - const: mediatek,mt7629-pciesys
reg:
maxItems: 1
@@ -38,7 +40,7 @@
examples:
- |
clock-controller@1a100800 {
- compatible = "mediatek,mt7622-pciesys";
+ compatible = "mediatek,mt7622-pciesys", "syscon";
reg = <0x1a100800 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
diff --git a/Bindings/clock/mediatek,mt8188-sys-clock.yaml b/Bindings/clock/mediatek,mt8188-sys-clock.yaml
index 4cf8d3a..db13d51 100644
--- a/Bindings/clock/mediatek,mt8188-sys-clock.yaml
+++ b/Bindings/clock/mediatek,mt8188-sys-clock.yaml
@@ -39,6 +39,9 @@
'#clock-cells':
const: 1
+ '#reset-cells':
+ const: 1
+
required:
- compatible
- reg
diff --git a/Bindings/clock/milbeaut-clock.yaml b/Bindings/clock/milbeaut-clock.yaml
index 0af1c56..d786f1e 100644
--- a/Bindings/clock/milbeaut-clock.yaml
+++ b/Bindings/clock/milbeaut-clock.yaml
@@ -40,38 +40,11 @@
additionalProperties: false
examples:
- # Clock controller node:
- |
- m10v-clk-ctrl@1d021000 {
+ clock-controller@1d021000 {
compatible = "socionext,milbeaut-m10v-ccu";
reg = <0x1d021000 0x4000>;
#clock-cells = <1>;
clocks = <&clki40mhz>;
};
-
- # Required an external clock for Clock controller node:
- - |
- clocks {
- clki40mhz: clki40mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
- /* other clocks */
- };
-
- # The clock consumer shall specify the desired clock-output of the clock
- # controller as below by specifying output-id in its "clk" phandle cell.
- # 2: uart
- # 4: 32-bit timer
- # 7: UHS-I/II
- - |
- serial@1e700010 {
- compatible = "socionext,milbeaut-usio-uart";
- reg = <0x1e700010 0x10>;
- interrupts = <0 141 0x4>, <0 149 0x4>;
- interrupt-names = "rx", "tx";
- clocks = <&clk 2>;
- };
-
...
diff --git a/Bindings/clock/qcom,dispcc-sc8280xp.yaml b/Bindings/clock/qcom,dispcc-sc8280xp.yaml
index 3cb996b..ffae037 100644
--- a/Bindings/clock/qcom,dispcc-sc8280xp.yaml
+++ b/Bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -40,31 +40,19 @@
- description: DSI 1 PLL byte clock
- description: DSI 1 PLL DSI clock
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
power-domains:
items:
- description: MMCX power domain
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,dispcc-sm6350.yaml b/Bindings/clock/qcom,dispcc-sm6350.yaml
index 8efac3f..a584b49 100644
--- a/Bindings/clock/qcom,dispcc-sm6350.yaml
+++ b/Bindings/clock/qcom,dispcc-sm6350.yaml
@@ -37,28 +37,16 @@
- const: dp_phy_pll_link_clk
- const: dp_phy_pll_vco_div_clk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,dispcc-sm8x50.yaml b/Bindings/clock/qcom,dispcc-sm8x50.yaml
index 59cc88a..53a5ab3 100644
--- a/Bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -27,6 +27,7 @@
- qcom,sm8350-dispcc
clocks:
+ minItems: 7
items:
- description: Board XO source
- description: Byte clock from DSI PHY0
@@ -35,8 +36,15 @@
- description: Pixel clock from DSI PHY1
- description: Link clock from DP PHY
- description: VCO DIV clock from DP PHY
+ - description: Link clock from eDP PHY
+ - description: VCO DIV clock from eDP PHY
+ - description: Link clock from DP1 PHY
+ - description: VCO DIV clock from DP1 PHY
+ - description: Link clock from DP2 PHY
+ - description: VCO DIV clock from DP2 PHY
clock-names:
+ minItems: 7
items:
- const: bi_tcxo
- const: dsi0_phy_pll_out_byteclk
@@ -45,18 +53,12 @@
- const: dsi1_phy_pll_out_dsiclk
- const: dp_phy_pll_link_clk
- const: dp_phy_pll_vco_div_clk
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
+ - const: edp_phy_pll_link_clk
+ - const: edp_phy_pll_vco_div_clk
+ - const: dptx1_phy_pll_link_clk
+ - const: dptx1_phy_pll_vco_div_clk
+ - const: dptx2_phy_pll_link_clk
+ - const: dptx2_phy_pll_vco_div_clk
power-domains:
description:
@@ -70,14 +72,26 @@
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sc8180x-dispcc
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ maxItems: 7
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,gcc-apq8064.yaml b/Bindings/clock/qcom,gcc-apq8064.yaml
index 1921117..27df7e3 100644
--- a/Bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -69,6 +69,8 @@
const: 1
deprecated: true
+ '#power-domain-cells': false
+
required:
- compatible
@@ -81,7 +83,6 @@
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
thermal-sensor {
compatible = "qcom,msm8960-tsens";
diff --git a/Bindings/clock/qcom,gcc-apq8084.yaml b/Bindings/clock/qcom,gcc-apq8084.yaml
index d846082..0a0a26d 100644
--- a/Bindings/clock/qcom,gcc-apq8084.yaml
+++ b/Bindings/clock/qcom,gcc-apq8084.yaml
@@ -51,6 +51,7 @@
required:
- compatible
+ - '#power-domain-cells'
unevaluatedProperties: false
diff --git a/Bindings/clock/qcom,gcc-ipq4019.yaml b/Bindings/clock/qcom,gcc-ipq4019.yaml
index fb3957d..0120489 100644
--- a/Bindings/clock/qcom,gcc-ipq4019.yaml
+++ b/Bindings/clock/qcom,gcc-ipq4019.yaml
@@ -34,6 +34,8 @@
- const: xo
- const: sleep_clk
+ '#power-domain-cells': false
+
required:
- compatible
@@ -45,7 +47,6 @@
compatible = "qcom,gcc-ipq4019";
reg = <0x1800000 0x60000>;
#clock-cells = <1>;
- #power-domain-cells = <1>;
#reset-cells = <1>;
clocks = <&xo>, <&sleep_clk>;
clock-names = "xo", "sleep_clk";
diff --git a/Bindings/clock/qcom,gcc-ipq6018.yaml b/Bindings/clock/qcom,gcc-ipq6018.yaml
index af5d883..4d2614d 100644
--- a/Bindings/clock/qcom,gcc-ipq6018.yaml
+++ b/Bindings/clock/qcom,gcc-ipq6018.yaml
@@ -36,6 +36,8 @@
- const: xo
- const: sleep_clk
+ '#power-domain-cells': false
+
required:
- compatible
- clocks
@@ -51,7 +53,6 @@
clocks = <&xo>, <&sleep_clk>;
clock-names = "xo", "sleep_clk";
#clock-cells = <1>;
- #power-domain-cells = <1>;
#reset-cells = <1>;
};
...
diff --git a/Bindings/clock/qcom,gcc-ipq8064.yaml b/Bindings/clock/qcom,gcc-ipq8064.yaml
index 93f3084..a715573 100644
--- a/Bindings/clock/qcom,gcc-ipq8064.yaml
+++ b/Bindings/clock/qcom,gcc-ipq8064.yaml
@@ -46,6 +46,8 @@
allOf:
- $ref: /schemas/thermal/qcom-tsens.yaml#
+ '#power-domain-cells': false
+
required:
- compatible
- clocks
@@ -65,7 +67,6 @@
clock-names = "pxo", "cxo", "pll4";
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
tsens: thermal-sensor {
compatible = "qcom,ipq8064-tsens";
diff --git a/Bindings/clock/qcom,gcc-ipq8074.yaml b/Bindings/clock/qcom,gcc-ipq8074.yaml
index 2d44ddc..38b9e42 100644
--- a/Bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Bindings/clock/qcom,gcc-ipq8074.yaml
@@ -39,6 +39,7 @@
required:
- compatible
+ - '#power-domain-cells'
unevaluatedProperties: false
diff --git a/Bindings/clock/qcom,gcc-other.yaml b/Bindings/clock/qcom,gcc-mdm9607.yaml
similarity index 87%
rename from Bindings/clock/qcom,gcc-other.yaml
rename to Bindings/clock/qcom,gcc-mdm9607.yaml
index 7d05f0f..d7da30b 100644
--- a/Bindings/clock/qcom,gcc-other.yaml
+++ b/Bindings/clock/qcom,gcc-mdm9607.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
-$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9607.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Global Clock & Reset Controller
@@ -15,7 +15,6 @@
domains.
See also::
- include/dt-bindings/clock/qcom,gcc-msm8953.h
include/dt-bindings/clock/qcom,gcc-mdm9607.h
allOf:
@@ -28,6 +27,7 @@
required:
- compatible
+ - '#power-domain-cells'
unevaluatedProperties: false
diff --git a/Bindings/clock/qcom,gcc-other.yaml b/Bindings/clock/qcom,gcc-mdm9615.yaml
similarity index 64%
copy from Bindings/clock/qcom,gcc-other.yaml
copy to Bindings/clock/qcom,gcc-mdm9615.yaml
index 7d05f0f..418dea3 100644
--- a/Bindings/clock/qcom,gcc-other.yaml
+++ b/Bindings/clock/qcom,gcc-mdm9615.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
-$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9615.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Global Clock & Reset Controller
@@ -15,8 +15,7 @@
domains.
See also::
- include/dt-bindings/clock/qcom,gcc-msm8953.h
- include/dt-bindings/clock/qcom,gcc-mdm9607.h
+ include/dt-bindings/clock/qcom,gcc-mdm9615.h
allOf:
- $ref: qcom,gcc.yaml#
@@ -24,7 +23,14 @@
properties:
compatible:
enum:
- - qcom,gcc-mdm9607
+ - qcom,gcc-mdm9615
+
+ clocks:
+ items:
+ - description: CXO clock
+ - description: PLL4 from LLC
+
+ '#power-domain-cells': false
required:
- compatible
@@ -34,10 +40,11 @@
examples:
- |
clock-controller@900000 {
- compatible = "qcom,gcc-mdm9607";
+ compatible = "qcom,gcc-mdm9615";
reg = <0x900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
+ clocks = <&cxo_board>,
+ <&lcc_pll4>;
};
...
diff --git a/Bindings/clock/qcom,gcc-msm8660.yaml b/Bindings/clock/qcom,gcc-msm8660.yaml
index c9e9855..e03b6d0 100644
--- a/Bindings/clock/qcom,gcc-msm8660.yaml
+++ b/Bindings/clock/qcom,gcc-msm8660.yaml
@@ -34,6 +34,8 @@
- const: pxo
- const: cxo
+ '#power-domain-cells': false
+
required:
- compatible
@@ -47,7 +49,6 @@
reg = <0x900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
clocks = <&pxo_board>, <&cxo_board>;
clock-names = "pxo", "cxo";
};
diff --git a/Bindings/clock/qcom,gcc-msm8909.yaml b/Bindings/clock/qcom,gcc-msm8909.yaml
index b914625..ce1f5a6 100644
--- a/Bindings/clock/qcom,gcc-msm8909.yaml
+++ b/Bindings/clock/qcom,gcc-msm8909.yaml
@@ -42,6 +42,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-msm8916.yaml b/Bindings/clock/qcom,gcc-msm8916.yaml
index ad84c0f..258b6b9 100644
--- a/Bindings/clock/qcom,gcc-msm8916.yaml
+++ b/Bindings/clock/qcom,gcc-msm8916.yaml
@@ -48,6 +48,7 @@
required:
- compatible
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-msm8953.yaml b/Bindings/clock/qcom,gcc-msm8953.yaml
index fe9fd4c..fe1f5f3 100644
--- a/Bindings/clock/qcom,gcc-msm8953.yaml
+++ b/Bindings/clock/qcom,gcc-msm8953.yaml
@@ -42,6 +42,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-msm8974.yaml b/Bindings/clock/qcom,gcc-msm8974.yaml
index 1927aec..929fafc 100644
--- a/Bindings/clock/qcom,gcc-msm8974.yaml
+++ b/Bindings/clock/qcom,gcc-msm8974.yaml
@@ -41,6 +41,7 @@
required:
- compatible
+ - '#power-domain-cells'
unevaluatedProperties: false
diff --git a/Bindings/clock/qcom,gcc-msm8976.yaml b/Bindings/clock/qcom,gcc-msm8976.yaml
index 62d6f1f..cd49704 100644
--- a/Bindings/clock/qcom,gcc-msm8976.yaml
+++ b/Bindings/clock/qcom,gcc-msm8976.yaml
@@ -49,6 +49,7 @@
- clocks
- clock-names
- vdd_gfx-supply
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-msm8994.yaml b/Bindings/clock/qcom,gcc-msm8994.yaml
index 8f0f20c..6b9c1d1 100644
--- a/Bindings/clock/qcom,gcc-msm8994.yaml
+++ b/Bindings/clock/qcom,gcc-msm8994.yaml
@@ -35,6 +35,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-msm8996.yaml b/Bindings/clock/qcom,gcc-msm8996.yaml
index 97523cc..013fd07 100644
--- a/Bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Bindings/clock/qcom,gcc-msm8996.yaml
@@ -50,6 +50,7 @@
required:
- compatible
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-msm8998.yaml b/Bindings/clock/qcom,gcc-msm8998.yaml
index 58f7fb2..abae658 100644
--- a/Bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Bindings/clock/qcom,gcc-msm8998.yaml
@@ -38,6 +38,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-qcm2290.yaml b/Bindings/clock/qcom,gcc-qcm2290.yaml
index c9bec46..38c4c8c 100644
--- a/Bindings/clock/qcom,gcc-qcm2290.yaml
+++ b/Bindings/clock/qcom,gcc-qcm2290.yaml
@@ -33,6 +33,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-qcs404.yaml b/Bindings/clock/qcom,gcc-qcs404.yaml
index 7bc6c57..9475546 100644
--- a/Bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Bindings/clock/qcom,gcc-qcs404.yaml
@@ -40,6 +40,7 @@
required:
- compatible
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sc7180.yaml b/Bindings/clock/qcom,gcc-sc7180.yaml
index 7aae21a..1847bbe 100644
--- a/Bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Bindings/clock/qcom,gcc-sc7180.yaml
@@ -40,6 +40,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sc7280.yaml b/Bindings/clock/qcom,gcc-sc7280.yaml
index c4ca08d..4e4f68b 100644
--- a/Bindings/clock/qcom,gcc-sc7280.yaml
+++ b/Bindings/clock/qcom,gcc-sc7280.yaml
@@ -51,6 +51,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sc8180x.yaml b/Bindings/clock/qcom,gcc-sc8180x.yaml
index a1085ef..b4784ec 100644
--- a/Bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/Bindings/clock/qcom,gcc-sc8180x.yaml
@@ -40,6 +40,7 @@
- clocks
- clock-names
- power-domains
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sc8280xp.yaml b/Bindings/clock/qcom,gcc-sc8280xp.yaml
index 5681e53..5cfde8a 100644
--- a/Bindings/clock/qcom,gcc-sc8280xp.yaml
+++ b/Bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -65,6 +65,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sdm660.yaml b/Bindings/clock/qcom,gcc-sdm660.yaml
index 52e7412..724ce04 100644
--- a/Bindings/clock/qcom,gcc-sdm660.yaml
+++ b/Bindings/clock/qcom,gcc-sdm660.yaml
@@ -40,6 +40,7 @@
required:
- compatible
+ - '#power-domain-cells'
unevaluatedProperties: false
diff --git a/Bindings/clock/qcom,gcc-sdm845.yaml b/Bindings/clock/qcom,gcc-sdm845.yaml
index 0595da0..ef0a204 100644
--- a/Bindings/clock/qcom,gcc-sdm845.yaml
+++ b/Bindings/clock/qcom,gcc-sdm845.yaml
@@ -35,6 +35,7 @@
required:
- compatible
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sdx55.yaml b/Bindings/clock/qcom,gcc-sdx55.yaml
index 428e954..30819f3 100644
--- a/Bindings/clock/qcom,gcc-sdx55.yaml
+++ b/Bindings/clock/qcom,gcc-sdx55.yaml
@@ -34,6 +34,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sdx65.yaml b/Bindings/clock/qcom,gcc-sdx65.yaml
index 523e18d..9154492 100644
--- a/Bindings/clock/qcom,gcc-sdx65.yaml
+++ b/Bindings/clock/qcom,gcc-sdx65.yaml
@@ -39,6 +39,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm6115.yaml b/Bindings/clock/qcom,gcc-sm6115.yaml
index a5ad0a3..ecb69c7 100644
--- a/Bindings/clock/qcom,gcc-sm6115.yaml
+++ b/Bindings/clock/qcom,gcc-sm6115.yaml
@@ -33,6 +33,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm6125.yaml b/Bindings/clock/qcom,gcc-sm6125.yaml
index 8e37623..a5a29dc 100644
--- a/Bindings/clock/qcom,gcc-sm6125.yaml
+++ b/Bindings/clock/qcom,gcc-sm6125.yaml
@@ -33,6 +33,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm6350.yaml b/Bindings/clock/qcom,gcc-sm6350.yaml
index d1b26ab..2280b85 100644
--- a/Bindings/clock/qcom,gcc-sm6350.yaml
+++ b/Bindings/clock/qcom,gcc-sm6350.yaml
@@ -35,6 +35,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm8150.yaml b/Bindings/clock/qcom,gcc-sm8150.yaml
index 58ccb7d..1dcf97c 100644
--- a/Bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Bindings/clock/qcom,gcc-sm8150.yaml
@@ -34,6 +34,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm8250.yaml b/Bindings/clock/qcom,gcc-sm8250.yaml
index 5d77c09..979ff0a 100644
--- a/Bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Bindings/clock/qcom,gcc-sm8250.yaml
@@ -36,6 +36,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm8350.yaml b/Bindings/clock/qcom,gcc-sm8350.yaml
index b4fdde7..594e87f 100644
--- a/Bindings/clock/qcom,gcc-sm8350.yaml
+++ b/Bindings/clock/qcom,gcc-sm8350.yaml
@@ -55,6 +55,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc-sm8450.yaml b/Bindings/clock/qcom,gcc-sm8450.yaml
index 75259f4..d848361 100644
--- a/Bindings/clock/qcom,gcc-sm8450.yaml
+++ b/Bindings/clock/qcom,gcc-sm8450.yaml
@@ -49,6 +49,7 @@
- compatible
- clocks
- clock-names
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,gcc.yaml b/Bindings/clock/qcom,gcc.yaml
index 7888251..513d6fd 100644
--- a/Bindings/clock/qcom,gcc.yaml
+++ b/Bindings/clock/qcom,gcc.yaml
@@ -35,7 +35,6 @@
- reg
- '#clock-cells'
- '#reset-cells'
- - '#power-domain-cells'
additionalProperties: true
diff --git a/Bindings/clock/qcom,gpucc-sdm660.yaml b/Bindings/clock/qcom,gpucc-sdm660.yaml
index 0518ea9..79bb90d 100644
--- a/Bindings/clock/qcom,gpucc-sdm660.yaml
+++ b/Bindings/clock/qcom,gpucc-sdm660.yaml
@@ -33,28 +33,16 @@
- const: gcc_gpu_gpll0_clk
- const: gcc_gpu_gpll0_div_clk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,gpucc.yaml b/Bindings/clock/qcom,gpucc.yaml
index f57aced..0858fd6 100644
--- a/Bindings/clock/qcom,gpucc.yaml
+++ b/Bindings/clock/qcom,gpucc.yaml
@@ -56,25 +56,10 @@
vdd-gfx-supply:
description: Regulator supply for the VDD_GFX pads
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
# Require that power-domains and vdd-gfx-supply are not both present
@@ -83,7 +68,10 @@
- power-domains
- vdd-gfx-supply
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,ipq5018-gcc.yaml b/Bindings/clock/qcom,ipq5018-gcc.yaml
index ef84a0c..489d0fc 100644
--- a/Bindings/clock/qcom,ipq5018-gcc.yaml
+++ b/Bindings/clock/qcom,ipq5018-gcc.yaml
@@ -33,6 +33,8 @@
- description: UNIPHY RX clock source
- description: UNIPHY TX clk source
+ '#power-domain-cells': false
+
required:
- compatible
- clocks
@@ -58,6 +60,5 @@
<&uniphy_tx_clk>;
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
};
...
diff --git a/Bindings/clock/qcom,ipq5332-gcc.yaml b/Bindings/clock/qcom,ipq5332-gcc.yaml
index 718fe06..adc30d8 100644
--- a/Bindings/clock/qcom,ipq5332-gcc.yaml
+++ b/Bindings/clock/qcom,ipq5332-gcc.yaml
@@ -30,6 +30,8 @@
- description: PCIE 2lane x1 PHY pipe clock source (For second lane)
- description: USB PCIE wrapper pipe clock source
+ '#power-domain-cells': false
+
required:
- compatible
- clocks
@@ -47,7 +49,6 @@
<&pcie_2lane_phy_pipe_clk_x1>,
<&usb_pcie_wrapper_pipe_clk>;
#clock-cells = <1>;
- #power-domain-cells = <1>;
#reset-cells = <1>;
};
...
diff --git a/Bindings/clock/qcom,ipq9574-gcc.yaml b/Bindings/clock/qcom,ipq9574-gcc.yaml
index 944a0ea..27ae993 100644
--- a/Bindings/clock/qcom,ipq9574-gcc.yaml
+++ b/Bindings/clock/qcom,ipq9574-gcc.yaml
@@ -33,6 +33,11 @@
- description: PCIE30 PHY3 pipe clock source
- description: USB3 PHY pipe clock source
+ '#power-domain-cells': false
+
+ '#interconnect-cells':
+ const: 1
+
required:
- compatible
- clocks
@@ -57,6 +62,5 @@
<&usb3phy_0_cc_pipe_clk>;
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
};
...
diff --git a/Bindings/clock/qcom,msm8998-gpucc.yaml b/Bindings/clock/qcom,msm8998-gpucc.yaml
index 7b271ae..b9b218e 100644
--- a/Bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Bindings/clock/qcom,msm8998-gpucc.yaml
@@ -29,28 +29,16 @@
- const: xo
- const: gpll0
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,qca8k-nsscc.yaml b/Bindings/clock/qcom,qca8k-nsscc.yaml
new file mode 100644
index 0000000..6147338
--- /dev/null
+++ b/Bindings/clock/qcom,qca8k-nsscc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qca8k-nsscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NSS Clock & Reset Controller on QCA8386/QCA8084
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Luo Jie <quic_luoj@quicinc.com>
+
+description: |
+ Qualcomm NSS clock control module provides the clocks and resets
+ on QCA8386(switch mode)/QCA8084(PHY mode)
+
+ See also::
+ include/dt-bindings/clock/qcom,qca8k-nsscc.h
+ include/dt-bindings/reset/qcom,qca8k-nsscc.h
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,qca8084-nsscc
+ - items:
+ - enum:
+ - qcom,qca8082-nsscc
+ - qcom,qca8085-nsscc
+ - qcom,qca8384-nsscc
+ - qcom,qca8385-nsscc
+ - qcom,qca8386-nsscc
+ - const: qcom,qca8084-nsscc
+
+ clocks:
+ items:
+ - description: Chip reference clock source
+ - description: UNIPHY0 RX 312P5M/125M clock source
+ - description: UNIPHY0 TX 312P5M/125M clock source
+ - description: UNIPHY1 RX 312P5M/125M clock source
+ - description: UNIPHY1 TX 312P5M/125M clock source
+ - description: UNIPHY1 RX 312P5M clock source
+ - description: UNIPHY1 TX 312P5M clock source
+
+ reg:
+ items:
+ - description: MDIO bus address for Clock & Reset Controller register
+
+ reset-gpios:
+ description: GPIO connected to the chip
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reset-gpios
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-controller@18 {
+ compatible = "qcom,qca8084-nsscc";
+ reg = <0x18>;
+ reset-gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ clocks = <&pcs0_pll>,
+ <&qca8k_uniphy0_rx>,
+ <&qca8k_uniphy0_tx>,
+ <&qca8k_uniphy1_rx>,
+ <&qca8k_uniphy1_tx>,
+ <&qca8k_uniphy1_rx312p5m>,
+ <&qca8k_uniphy1_tx312p5m>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+ };
+...
diff --git a/Bindings/clock/qcom,qcm2290-dispcc.yaml b/Bindings/clock/qcom,qcm2290-dispcc.yaml
index 4a00f2d..243be4f 100644
--- a/Bindings/clock/qcom,qcm2290-dispcc.yaml
+++ b/Bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -37,28 +37,16 @@
- const: dsi0_phy_pll_out_byteclk
- const: dsi0_phy_pll_out_dsiclk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,qcm2290-gpucc.yaml b/Bindings/clock/qcom,qcm2290-gpucc.yaml
new file mode 100644
index 0000000..7348808
--- /dev/null
+++ b/Bindings/clock/qcom,qcm2290-gpucc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on QCM2290
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+ Qualcomm graphics clock control module provides the clocks, resets and power
+ domains on Qualcomm SoCs.
+
+ See also::
+ include/dt-bindings/clock/qcom,qcm2290-gpucc.h
+
+properties:
+ compatible:
+ const: qcom,qcm2290-gpucc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: AHB interface clock,
+ - description: SoC CXO clock
+ - description: GPLL0 main branch source
+ - description: GPLL0 div branch source
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier for the CX power domain.
+ maxItems: 1
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing required CX performance point.
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@5990000 {
+ compatible = "qcom,qcm2290-gpucc";
+ reg = <0x0 0x05990000 0x0 0x9000>;
+ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+ };
+...
diff --git a/Bindings/clock/qcom,qdu1000-gcc.yaml b/Bindings/clock/qcom,qdu1000-gcc.yaml
index d712b1a..86befef 100644
--- a/Bindings/clock/qcom,qdu1000-gcc.yaml
+++ b/Bindings/clock/qcom,qdu1000-gcc.yaml
@@ -31,6 +31,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,sa8775p-gcc.yaml b/Bindings/clock/qcom,sa8775p-gcc.yaml
index 0f641c2..addbd32 100644
--- a/Bindings/clock/qcom,sa8775p-gcc.yaml
+++ b/Bindings/clock/qcom,sa8775p-gcc.yaml
@@ -46,6 +46,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,sc7180-dispcc.yaml b/Bindings/clock/qcom,sc7180-dispcc.yaml
index 1c9ce30..0d8ea44 100644
--- a/Bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Bindings/clock/qcom,sc7180-dispcc.yaml
@@ -37,28 +37,16 @@
- const: dp_phy_pll_link_clk
- const: dp_phy_pll_vco_div_clk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sc7280-dispcc.yaml b/Bindings/clock/qcom,sc7280-dispcc.yaml
index c42b0ef..2317766 100644
--- a/Bindings/clock/qcom,sc7280-dispcc.yaml
+++ b/Bindings/clock/qcom,sc7280-dispcc.yaml
@@ -41,28 +41,16 @@
- const: edp_phy_pll_link_clk
- const: edp_phy_pll_vco_div_clk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sdm845-dispcc.yaml b/Bindings/clock/qcom,sdm845-dispcc.yaml
index 719844d..220f400 100644
--- a/Bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Bindings/clock/qcom,sdm845-dispcc.yaml
@@ -46,28 +46,16 @@
- const: dp_link_clk_divsel_ten
- const: dp_vco_divided_clk_src_mux
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sdx75-gcc.yaml b/Bindings/clock/qcom,sdx75-gcc.yaml
index 98921fa..567182a 100644
--- a/Bindings/clock/qcom,sdx75-gcc.yaml
+++ b/Bindings/clock/qcom,sdx75-gcc.yaml
@@ -41,6 +41,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,sm4450-gcc.yaml b/Bindings/clock/qcom,sm4450-gcc.yaml
index 5953c8d..0ac92d7 100644
--- a/Bindings/clock/qcom,sm4450-gcc.yaml
+++ b/Bindings/clock/qcom,sm4450-gcc.yaml
@@ -32,6 +32,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,sm6115-dispcc.yaml b/Bindings/clock/qcom,sm6115-dispcc.yaml
index f802a2e..00be366 100644
--- a/Bindings/clock/qcom,sm6115-dispcc.yaml
+++ b/Bindings/clock/qcom,sm6115-dispcc.yaml
@@ -28,27 +28,15 @@
- description: Pixel clock from DSI PHY0
- description: GPLL0 DISP DIV clock from GCC
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sm6375-gcc.yaml b/Bindings/clock/qcom,sm6375-gcc.yaml
index 295d4bb..147b75a 100644
--- a/Bindings/clock/qcom,sm6375-gcc.yaml
+++ b/Bindings/clock/qcom,sm6375-gcc.yaml
@@ -31,6 +31,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
unevaluatedProperties: false
diff --git a/Bindings/clock/qcom,sm7150-camcc.yaml b/Bindings/clock/qcom,sm7150-camcc.yaml
new file mode 100644
index 0000000..7be4b10
--- /dev/null
+++ b/Bindings/clock/qcom,sm7150-camcc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM7150
+
+maintainers:
+ - Danila Tikhonov <danila@jiaxyga.com>
+ - David Wronek <david@mainlining.org>
+ - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+ Qualcomm camera clock control module provides the clocks, resets and power
+ domains on SM7150.
+
+ See also:: include/dt-bindings/clock/qcom,sm7150-camcc.h
+
+properties:
+ compatible:
+ const: qcom,sm7150-camcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board XO Active-Only source
+ - description: Sleep clock source
+
+ power-domains:
+ maxItems: 1
+ description:
+ CX power domain.
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ clock-controller@ad00000 {
+ compatible = "qcom,sm7150-camcc";
+ reg = <0xad00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Bindings/clock/qcom,sm7150-dispcc.yaml b/Bindings/clock/qcom,sm7150-dispcc.yaml
new file mode 100644
index 0000000..b8d6e1d
--- /dev/null
+++ b/Bindings/clock/qcom,sm7150-dispcc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM7150
+
+maintainers:
+ - Danila Tikhonov <danila@jiaxyga.com>
+ - David Wronek <david@mainlining.org>
+ - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+ Qualcomm display clock control module provides the clocks, resets and power
+ domains on SM7150.
+
+ See also:: include/dt-bindings/clock/qcom,sm7150-dispcc.h
+
+properties:
+ compatible:
+ const: qcom,sm7150-dispcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board Always On XO source
+ - description: GPLL0 source from GCC
+ - description: Sleep clock source
+ - description: Byte clock from MDSS DSI PHY0
+ - description: Pixel clock from MDSS DSI PHY0
+ - description: Byte clock from MDSS DSI PHY1
+ - description: Pixel clock from MDSS DSI PHY1
+ - description: Link clock from DP PHY
+ - description: VCO DIV clock from DP PHY
+
+ power-domains:
+ maxItems: 1
+ description:
+ CX power domain.
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm7150-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ clock-controller@af00000 {
+ compatible = "qcom,sm7150-dispcc";
+ reg = <0x0af00000 0x200000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&sleep_clk>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&dp_phy 0>,
+ <&dp_phy 1>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Bindings/clock/qcom,sm7150-gcc.yaml b/Bindings/clock/qcom,sm7150-gcc.yaml
index 0eb76d9..4d7bbbf 100644
--- a/Bindings/clock/qcom,sm7150-gcc.yaml
+++ b/Bindings/clock/qcom,sm7150-gcc.yaml
@@ -30,6 +30,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,sm7150-videocc.yaml b/Bindings/clock/qcom,sm7150-videocc.yaml
new file mode 100644
index 0000000..037ffc7
--- /dev/null
+++ b/Bindings/clock/qcom,sm7150-videocc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM7150
+
+maintainers:
+ - Danila Tikhonov <danila@jiaxyga.com>
+ - David Wronek <david@mainlining.org>
+ - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+ Qualcomm video clock control module provides the clocks, resets and power
+ domains on SM7150.
+
+ See also:: include/dt-bindings/clock/qcom,videocc-sm7150.h
+
+properties:
+ compatible:
+ const: qcom,sm7150-videocc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board Always On XO source
+
+ power-domains:
+ maxItems: 1
+ description:
+ CX power domain.
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ videocc: clock-controller@ab00000 {
+ compatible = "qcom,sm7150-videocc";
+ reg = <0x0ab00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Bindings/clock/qcom,sm8450-camcc.yaml b/Bindings/clock/qcom,sm8450-camcc.yaml
index fa0e5b6..f58edfc 100644
--- a/Bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Bindings/clock/qcom,sm8450-camcc.yaml
@@ -8,15 +8,17 @@
maintainers:
- Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+ - Jagadeesh Kona <quic_jkona@quicinc.com>
description: |
Qualcomm camera clock control module provides the clocks, resets and power
domains on SM8450.
- See also::
+ See also:
+ include/dt-bindings/clock/qcom,sc8280xp-camcc.h
include/dt-bindings/clock/qcom,sm8450-camcc.h
include/dt-bindings/clock/qcom,sm8550-camcc.h
- include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+ include/dt-bindings/clock/qcom,sm8650-camcc.h
include/dt-bindings/clock/qcom,x1e80100-camcc.h
allOf:
@@ -28,6 +30,7 @@
- qcom,sc8280xp-camcc
- qcom,sm8450-camcc
- qcom,sm8550-camcc
+ - qcom,sm8650-camcc
- qcom,x1e80100-camcc
clocks:
diff --git a/Bindings/clock/qcom,sm8450-dispcc.yaml b/Bindings/clock/qcom,sm8450-dispcc.yaml
index 2f22310..4794c53 100644
--- a/Bindings/clock/qcom,sm8450-dispcc.yaml
+++ b/Bindings/clock/qcom,sm8450-dispcc.yaml
@@ -40,18 +40,6 @@
- description: Link clock from DP PHY3
- description: VCO DIV clock from DP PHY3
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
power-domains:
description:
A phandle and PM domain specifier for the MMCX power domain.
@@ -64,13 +52,13 @@
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sm8450-gpucc.yaml b/Bindings/clock/qcom,sm8450-gpucc.yaml
index 3697430..3c2cac1 100644
--- a/Bindings/clock/qcom,sm8450-gpucc.yaml
+++ b/Bindings/clock/qcom,sm8450-gpucc.yaml
@@ -34,27 +34,15 @@
- description: GPLL0 main branch source
- description: GPLL0 div branch source
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sm8450-videocc.yaml b/Bindings/clock/qcom,sm8450-videocc.yaml
index bad8f01..b2792b4 100644
--- a/Bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Bindings/clock/qcom,sm8450-videocc.yaml
@@ -8,21 +8,22 @@
maintainers:
- Taniya Das <quic_tdas@quicinc.com>
+ - Jagadeesh Kona <quic_jkona@quicinc.com>
description: |
Qualcomm video clock control module provides the clocks, resets and power
domains on SM8450.
- See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
+ See also:
+ include/dt-bindings/clock/qcom,sm8450-videocc.h
+ include/dt-bindings/clock/qcom,sm8650-videocc.h
properties:
compatible:
enum:
- qcom,sm8450-videocc
- qcom,sm8550-videocc
-
- reg:
- maxItems: 1
+ - qcom,sm8650-videocc
clocks:
items:
@@ -39,26 +40,17 @@
description:
A phandle to an OPP node describing required MMCX performance point.
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
required:
- compatible
- - reg
- clocks
- power-domains
- required-opps
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sm8550-dispcc.yaml b/Bindings/clock/qcom,sm8550-dispcc.yaml
index bad0260..c17035a 100644
--- a/Bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Bindings/clock/qcom,sm8550-dispcc.yaml
@@ -45,18 +45,6 @@
- description: Link clock from DP PHY3
- description: VCO DIV clock from DP PHY3
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
power-domains:
description:
A phandle and PM domain specifier for the MMCX power domain.
@@ -69,13 +57,13 @@
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,sm8550-gcc.yaml b/Bindings/clock/qcom,sm8550-gcc.yaml
index 0c706de..d83b64d 100644
--- a/Bindings/clock/qcom,sm8550-gcc.yaml
+++ b/Bindings/clock/qcom,sm8550-gcc.yaml
@@ -34,6 +34,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,sm8650-gcc.yaml b/Bindings/clock/qcom,sm8650-gcc.yaml
index b54761c..976f29c 100644
--- a/Bindings/clock/qcom,sm8650-gcc.yaml
+++ b/Bindings/clock/qcom,sm8650-gcc.yaml
@@ -35,6 +35,7 @@
required:
- compatible
- clocks
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qcom,videocc.yaml b/Bindings/clock/qcom,videocc.yaml
index 6999e36..340c7e5 100644
--- a/Bindings/clock/qcom,videocc.yaml
+++ b/Bindings/clock/qcom,videocc.yaml
@@ -37,18 +37,6 @@
minItems: 1
maxItems: 3
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
power-domains:
description:
A phandle and PM domain specifier for the MMCX power domain.
@@ -61,21 +49,19 @@
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
allOf:
+ - $ref: qcom,gcc.yaml#
+
- if:
properties:
compatible:
enum:
- qcom,sc7180-videocc
- qcom,sdm845-videocc
- - qcom,sm8150-videocc
then:
properties:
clocks:
@@ -105,6 +91,22 @@
properties:
compatible:
enum:
+ - qcom,sm8150-videocc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: AHB
+ - description: Board XO source
+ clock-names:
+ items:
+ - const: iface
+ - const: bi_tcxo
+
+ - if:
+ properties:
+ compatible:
+ enum:
- qcom,sm8250-videocc
then:
properties:
@@ -119,7 +121,7 @@
- const: bi_tcxo
- const: bi_tcxo_ao
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/clock/qcom,x1e80100-gcc.yaml b/Bindings/clock/qcom,x1e80100-gcc.yaml
index 14a796d..5951a60 100644
--- a/Bindings/clock/qcom,x1e80100-gcc.yaml
+++ b/Bindings/clock/qcom,x1e80100-gcc.yaml
@@ -41,6 +41,7 @@
- compatible
- clocks
- power-domains
+ - '#power-domain-cells'
allOf:
- $ref: qcom,gcc.yaml#
diff --git a/Bindings/clock/qoriq-clock.txt b/Bindings/clock/qoriq-clock.txt
deleted file mode 100644
index 10119d9..0000000
--- a/Bindings/clock/qoriq-clock.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-* Clock Block on Freescale QorIQ Platforms
-
-Freescale QorIQ chips take primary clocking input from the external
-SYSCLK signal. The SYSCLK input (frequency) is multiplied using
-multiple phase locked loops (PLL) to create a variety of frequencies
-which can then be passed to a variety of internal logic, including
-cores and peripheral IP blocks.
-Please refer to the Reference Manual for details.
-
-All references to "1.0" and "2.0" refer to the QorIQ chassis version to
-which the chip complies.
-
-Chassis Version Example Chips
---------------- -------------
-1.0 p4080, p5020, p5040
-2.0 t4240, b4860
-
-1. Clock Block Binding
-
-Required properties:
-- compatible: Should contain a chip-specific clock block compatible
- string and (if applicable) may contain a chassis-version clock
- compatible string.
-
- Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
- * "fsl,p2041-clockgen"
- * "fsl,p3041-clockgen"
- * "fsl,p4080-clockgen"
- * "fsl,p5020-clockgen"
- * "fsl,p5040-clockgen"
- * "fsl,t1023-clockgen"
- * "fsl,t1024-clockgen"
- * "fsl,t1040-clockgen"
- * "fsl,t1042-clockgen"
- * "fsl,t2080-clockgen"
- * "fsl,t2081-clockgen"
- * "fsl,t4240-clockgen"
- * "fsl,b4420-clockgen"
- * "fsl,b4860-clockgen"
- * "fsl,ls1012a-clockgen"
- * "fsl,ls1021a-clockgen"
- * "fsl,ls1028a-clockgen"
- * "fsl,ls1043a-clockgen"
- * "fsl,ls1046a-clockgen"
- * "fsl,ls1088a-clockgen"
- * "fsl,ls2080a-clockgen"
- * "fsl,lx2160a-clockgen"
- Chassis-version clock strings include:
- * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
- * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
-- reg: Describes the address of the device's resources within the
- address space defined by its parent bus, and resource zero
- represents the clock register set
-
-Optional properties:
-- ranges: Allows valid translation between child's address space and
- parent's. Must be present if the device has sub-nodes.
-- #address-cells: Specifies the number of cells used to represent
- physical base addresses. Must be present if the device has
- sub-nodes and set to 1 if present
-- #size-cells: Specifies the number of cells used to represent
- the size of an address. Must be present if the device has
- sub-nodes and set to 1 if present
-- clock-frequency: Input system clock frequency (SYSCLK)
-- clocks: If clock-frequency is not specified, sysclk may be provided
- as an input clock. Either clock-frequency or clocks must be
- provided.
- A second input clock, called "coreclk", may be provided if
- core PLLs are based on a different input clock from the
- platform PLL.
-- clock-names: Required if a coreclk is present. Valid names are
- "sysclk" and "coreclk".
-
-2. Clock Provider
-
-The clockgen node should act as a clock provider, though in older device
-trees the children of the clockgen node are the clock providers.
-
-When the clockgen node is a clock provider, #clock-cells = <2>.
-The first cell of the clock specifier is the clock type, and the
-second cell is the clock index for the specified type.
-
- Type# Name Index Cell
- 0 sysclk must be 0
- 1 cmux index (n in CLKCnCSR)
- 2 hwaccel index (n in CLKCGnHWACSR)
- 3 fman 0 for fm1, 1 for fm2
- 4 platform pll n=pll/(n+1). For example, when n=1,
- that means output_freq=PLL_freq/2.
- 5 coreclk must be 0
-
-3. Example
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- clock-frequency = <133333333>;
- reg = <0xe1000 0x1000>;
- #clock-cells = <2>;
- };
-
- fman@400000 {
- ...
- clocks = <&clockgen 3 0>;
- ...
- };
-}
-4. Legacy Child Nodes
-
-NOTE: These nodes are deprecated. Kernels should continue to support
-device trees with these nodes, but new device trees should not use them.
-
-Most of the bindings are from the common clock binding[1].
- [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : Should include one of the following:
- * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
- * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
- * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
- * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
- * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
- It takes parent's clock-frequency as its clock.
- * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
- It takes parent's clock-frequency as its clock.
- * "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
- * "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
-- #clock-cells: From common clock binding. The number of cells in a
- clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
- clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
- For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
- clock-specifier cell may take the following values:
- * 0 - equal to the PLL frequency
- * 1 - equal to the PLL frequency divided by 2
- * 2 - equal to the PLL frequency divided by 4
-
-Recommended properties:
-- clocks: Should be the phandle of input parent clock
-- clock-names: From common clock binding, indicates the clock name
-- clock-output-names: From common clock binding, indicates the names of
- output clocks
-- reg: Should be the offset and length of clock block base address.
- The length should be 4.
-
-Legacy Example:
-/ {
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- ranges = <0x0 0xe1000 0x1000>;
- clock-frequency = <133333333>;
- reg = <0xe1000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysclk: sysclk {
- #clock-cells = <0>;
- compatible = "fsl,qoriq-sysclk-1.0";
- clock-output-names = "sysclk";
- };
-
- pll0: pll0@800 {
- #clock-cells = <1>;
- reg = <0x800 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll0", "pll0-div2";
- };
-
- pll1: pll1@820 {
- #clock-cells = <1>;
- reg = <0x820 0x4>;
- compatible = "fsl,qoriq-core-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "pll1", "pll1-div2";
- };
-
- mux0: mux0@0 {
- #clock-cells = <0>;
- reg = <0x0 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux0";
- };
-
- mux1: mux1@20 {
- #clock-cells = <0>;
- reg = <0x20 0x4>;
- compatible = "fsl,qoriq-core-mux-1.0";
- clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
- clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
- clock-output-names = "cmux1";
- };
-
- platform-pll: platform-pll@c00 {
- #clock-cells = <1>;
- reg = <0xc00 0x4>;
- compatible = "fsl,qoriq-platform-pll-1.0";
- clocks = <&sysclk>;
- clock-output-names = "platform-pll", "platform-pll-div2";
- };
- };
-};
-
-Example for legacy clock consumer:
-
-/ {
- cpu0: PowerPC,e5500@0 {
- ...
- clocks = <&mux0>;
- ...
- };
-};
diff --git a/Bindings/clock/renesas,rzg2l-cpg.yaml b/Bindings/clock/renesas,rzg2l-cpg.yaml
index 4e3b0c4..0440f23 100644
--- a/Bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Bindings/clock/renesas,rzg2l-cpg.yaml
@@ -62,7 +62,7 @@
'#reset-cells':
description:
- The single reset specifier cell must be the module number, as defined in
+ The single reset specifier cell must be the reset number, as defined in
<dt-bindings/clock/r9a0*-cpg.h>.
const: 1
diff --git a/Bindings/clock/sophgo,sg2042-clkgen.yaml b/Bindings/clock/sophgo,sg2042-clkgen.yaml
new file mode 100644
index 0000000..e7a9255
--- /dev/null
+++ b/Bindings/clock/sophgo,sg2042-clkgen.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Clock Generator for divider/mux/gate
+
+maintainers:
+ - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+ compatible:
+ const: sophgo,sg2042-clkgen
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main PLL
+ - description: Fixed PLL
+ - description: DDR PLL 0
+ - description: DDR PLL 1
+
+ clock-names:
+ items:
+ - const: mpll
+ - const: fpll
+ - const: dpll0
+ - const: dpll1
+
+ '#clock-cells':
+ const: 1
+ description:
+ See <dt-bindings/clock/sophgo,sg2042-clkgen.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@30012000 {
+ compatible = "sophgo,sg2042-clkgen";
+ reg = <0x30012000 0x1000>;
+ clocks = <&pllclk 0>,
+ <&pllclk 1>,
+ <&pllclk 2>,
+ <&pllclk 3>;
+ clock-names = "mpll",
+ "fpll",
+ "dpll0",
+ "dpll1";
+ #clock-cells = <1>;
+ };
diff --git a/Bindings/clock/sophgo,sg2042-pll.yaml b/Bindings/clock/sophgo,sg2042-pll.yaml
new file mode 100644
index 0000000..1a417a6
--- /dev/null
+++ b/Bindings/clock/sophgo,sg2042-pll.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 PLL Clock Generator
+
+maintainers:
+ - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+ compatible:
+ const: sophgo,sg2042-pll
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Oscillator(Clock Generation IC) for Main/Fixed PLL (25 MHz)
+ - description: Oscillator(Clock Generation IC) for DDR PLL 0 (25 MHz)
+ - description: Oscillator(Clock Generation IC) for DDR PLL 1 (25 MHz)
+
+ clock-names:
+ items:
+ - const: cgi_main
+ - const: cgi_dpll0
+ - const: cgi_dpll1
+
+ '#clock-cells':
+ const: 1
+ description:
+ See <dt-bindings/clock/sophgo,sg2042-pll.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@10000000 {
+ compatible = "sophgo,sg2042-pll";
+ reg = <0x10000000 0x10000>;
+ clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>;
+ clock-names = "cgi_main", "cgi_dpll0", "cgi_dpll1";
+ #clock-cells = <1>;
+ };
diff --git a/Bindings/clock/sophgo,sg2042-rpgate.yaml b/Bindings/clock/sophgo,sg2042-rpgate.yaml
new file mode 100644
index 0000000..1491fb8
--- /dev/null
+++ b/Bindings/clock/sophgo,sg2042-rpgate.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-rpgate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Gate Clock Generator for RP(riscv processors) subsystem
+
+maintainers:
+ - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+ compatible:
+ const: sophgo,sg2042-rpgate
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Gate clock for RP subsystem
+
+ clock-names:
+ items:
+ - const: rpgate
+
+ '#clock-cells':
+ const: 1
+ description:
+ See <dt-bindings/clock/sophgo,sg2042-rpgate.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@20000000 {
+ compatible = "sophgo,sg2042-rpgate";
+ reg = <0x20000000 0x10000>;
+ clocks = <&clkgen 85>;
+ clock-names = "rpgate";
+ #clock-cells = <1>;
+ };
diff --git a/Bindings/clock/sprd,sc9860-clk.txt b/Bindings/clock/sprd,sc9860-clk.txt
deleted file mode 100644
index aaaf02c..0000000
--- a/Bindings/clock/sprd,sc9860-clk.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum SC9860 Clock Binding
-------------------------
-
-Required properties:
-- compatible: should contain the following compatible strings:
- - "sprd,sc9860-pmu-gate"
- - "sprd,sc9860-pll"
- - "sprd,sc9860-ap-clk"
- - "sprd,sc9860-aon-prediv"
- - "sprd,sc9860-apahb-gate"
- - "sprd,sc9860-aon-gate"
- - "sprd,sc9860-aonsecure-clk"
- - "sprd,sc9860-agcp-gate"
- - "sprd,sc9860-gpu-clk"
- - "sprd,sc9860-vsp-clk"
- - "sprd,sc9860-vsp-gate"
- - "sprd,sc9860-cam-clk"
- - "sprd,sc9860-cam-gate"
- - "sprd,sc9860-disp-clk"
- - "sprd,sc9860-disp-gate"
- - "sprd,sc9860-apapb-gate"
-
-- #clock-cells: must be 1
-
-- clocks : Should be the input parent clock(s) phandle for the clock, this
- property here just simply shows which clock group the clocks'
- parents are in, since each clk node would represent many clocks
- which are defined in the driver. The detailed dependency
- relationship (i.e. how many parents and which are the parents)
- are implemented in driver code.
-
-Optional properties:
-
-- reg: Contain the registers base address and length. It must be configured
- only if no 'sprd,syscon' under the node.
-
-- sprd,syscon: phandle to the syscon which is in the same address area with
- the clock, and so we can get regmap for the clocks from the
- syscon device.
-
-Example:
-
- pmu_gate: pmu-gate {
- compatible = "sprd,sc9860-pmu-gate";
- sprd,syscon = <&pmu_regs>;
- clocks = <&ext_26m>;
- #clock-cells = <1>;
- };
-
- pll: pll {
- compatible = "sprd,sc9860-pll";
- sprd,syscon = <&ana_regs>;
- clocks = <&pmu_gate 0>;
- #clock-cells = <1>;
- };
-
- ap_clk: clock-controller@20000000 {
- compatible = "sprd,sc9860-ap-clk";
- reg = <0 0x20000000 0 0x400>;
- clocks = <&ext_26m>, <&pll 0>,
- <&pmu_gate 0>;
- #clock-cells = <1>;
- };
diff --git a/Bindings/clock/sprd,sc9860-clk.yaml b/Bindings/clock/sprd,sc9860-clk.yaml
new file mode 100644
index 0000000..502cd72
--- /dev/null
+++ b/Bindings/clock/sprd,sc9860-clk.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,sc9860-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 clock
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc9860-agcp-gate
+ - sprd,sc9860-aonsecure-clk
+ - sprd,sc9860-aon-gate
+ - sprd,sc9860-aon-prediv
+ - sprd,sc9860-apahb-gate
+ - sprd,sc9860-apapb-gate
+ - sprd,sc9860-ap-clk
+ - sprd,sc9860-cam-clk
+ - sprd,sc9860-cam-gate
+ - sprd,sc9860-disp-clk
+ - sprd,sc9860-disp-gate
+ - sprd,sc9860-gpu-clk
+ - sprd,sc9860-pll
+ - sprd,sc9860-pmu-gate
+ - sprd,sc9860-vsp-clk
+ - sprd,sc9860-vsp-gate
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ '#clock-cells':
+ const: 1
+
+ sprd,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the syscon which is in the same address area with the
+ clock, and so we can get regmap for the clocks from the syscon device
+
+required:
+ - compatible
+ - clocks
+ - '#clock-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sprd,sc9860-agcp-gate
+ - sprd,sc9860-aon-gate
+ - sprd,sc9860-apahb-gate
+ - sprd,sc9860-apapb-gate
+ - sprd,sc9860-cam-gate
+ - sprd,sc9860-disp-gate
+ - sprd,sc9860-gpu-clk
+ - sprd,sc9860-pll
+ - sprd,sc9860-pmu-gate
+ - sprd,sc9860-vsp-gate
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sprd,sc9860-aonsecure-clk
+ - sprd,sc9860-cam-clk
+ - sprd,sc9860-disp-clk
+ - sprd,sc9860-vsp-clk
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sprd,sc9860-aon-prediv
+ - sprd,sc9860-ap-clk
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sprd,sc9860-aonsecure-clk
+ - sprd,sc9860-aon-prediv
+ - sprd,sc9860-ap-clk
+ - sprd,sc9860-cam-clk
+ - sprd,sc9860-disp-clk
+ - sprd,sc9860-gpu-clk
+ - sprd,sc9860-vsp-clk
+ then:
+ required:
+ - reg
+ properties:
+ sprd,syscon: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sprd,sc9860-agcp-gate
+ - sprd,sc9860-aon-gate
+ - sprd,sc9860-apahb-gate
+ - sprd,sc9860-apapb-gate
+ - sprd,sc9860-cam-gate
+ - sprd,sc9860-disp-gate
+ - sprd,sc9860-pll
+ - sprd,sc9860-pmu-gate
+ - sprd,sc9860-vsp-gate
+ then:
+ required:
+ - sprd,syscon
+ properties:
+ reg: false
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pmu-gate {
+ compatible = "sprd,sc9860-pmu-gate";
+ clocks = <&ext_26m>;
+ #clock-cells = <1>;
+ sprd,syscon = <&pmu_regs>;
+ };
+
+ clock-controller@20000000 {
+ compatible = "sprd,sc9860-ap-clk";
+ reg = <0 0x20000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>, <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+ };
+...
diff --git a/Bindings/clock/stericsson,abx500.txt b/Bindings/clock/stericsson,abx500.txt
deleted file mode 100644
index dbaa886..0000000
--- a/Bindings/clock/stericsson,abx500.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Clock bindings for ST-Ericsson ABx500 clocks
-
-Required properties :
-- compatible : shall contain the following:
- "stericsson,ab8500-clk"
-- #clock-cells should be <1>
-
-The ABx500 clocks need to be placed as a subnode of an AB8500
-device node, see mfd/ab8500.txt
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/ste-ab8500.h header and can be used in device
-tree sources.
-
-Example:
-
-clock-controller {
- compatible = "stericsson,ab8500-clk";
- #clock-cells = <1>;
-};
diff --git a/Bindings/clock/thead,th1520-clk-ap.yaml b/Bindings/clock/thead,th1520-clk-ap.yaml
new file mode 100644
index 0000000..0129bd0
--- /dev/null
+++ b/Bindings/clock/thead,th1520-clk-ap.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/thead,th1520-clk-ap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 AP sub-system clock controller
+
+description: |
+ The T-HEAD TH1520 AP sub-system clock controller configures the
+ CPU, DPU, GMAC and TEE PLLs.
+
+ SoC reference manual
+ https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+ - Wei Fu <wefu@redhat.com>
+ - Drew Fustini <dfustini@tenstorrent.com>
+
+properties:
+ compatible:
+ const: thead,th1520-clk-ap
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: main oscillator (24MHz)
+
+ "#clock-cells":
+ const: 1
+ description:
+ See <dt-bindings/clock/thead,th1520-clk-ap.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/thead,th1520-clk-ap.h>
+ clock-controller@ef010000 {
+ compatible = "thead,th1520-clk-ap";
+ reg = <0xef010000 0x1000>;
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ };
diff --git a/Bindings/clock/ti,sci-clk.yaml b/Bindings/clock/ti,sci-clk.yaml
index 0a9d6a4..66e8e66 100644
--- a/Bindings/clock/ti,sci-clk.yaml
+++ b/Bindings/clock/ti,sci-clk.yaml
@@ -36,7 +36,7 @@
The second cell should contain the clock ID.
- Please see http://processors.wiki.ti.com/index.php/TISCI for
+ Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
protocol documentation for the values to be used for different devices.
additionalProperties: false
diff --git a/Bindings/clock/ti-keystone-pllctrl.txt b/Bindings/clock/ti-keystone-pllctrl.txt
deleted file mode 100644
index c35cb6c..0000000
--- a/Bindings/clock/ti-keystone-pllctrl.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Device tree bindings for Texas Instruments keystone pll controller
-
-The main pll controller used to drive theC66x CorePacs, the switch fabric,
-and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
-the NETCP modules) requires a PLL Controller to manage the various clock
-divisions, gating, and synchronization.
-
-Required properties:
-
-- compatible: "ti,keystone-pllctrl", "syscon"
-
-- reg: contains offset/length value for pll controller
- registers space.
-
-Example:
-
-pllctrl: pll-controller@02310000 {
- compatible = "ti,keystone-pllctrl", "syscon";
- reg = <0x02310000 0x200>;
-};
diff --git a/Bindings/counter/ti-eqep.yaml b/Bindings/counter/ti-eqep.yaml
index 85f1ff8..c882ab5 100644
--- a/Bindings/counter/ti-eqep.yaml
+++ b/Bindings/counter/ti-eqep.yaml
@@ -11,7 +11,9 @@
properties:
compatible:
- const: ti,am3352-eqep
+ enum:
+ - ti,am3352-eqep
+ - ti,am62-eqep
reg:
maxItems: 1
@@ -21,19 +23,35 @@
maxItems: 1
clocks:
- description: The clock that determines the SYSCLKOUT rate for the eQEP
- peripheral.
+ description: The functional and interface clock that determines the clock
+ rate for the eQEP peripheral.
maxItems: 1
clock-names:
const: sysclkout
+ power-domains:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,am62-eqep
+ then:
+ properties:
+ clock-names: false
+
+ required:
+ - power-domains
+
required:
- compatible
- reg
- interrupts
- clocks
- - clock-names
additionalProperties: false
@@ -43,7 +61,6 @@
compatible = "ti,am3352-eqep";
reg = <0x180 0x80>;
clocks = <&l4ls_gclk>;
- clock-names = "sysclkout";
interrupts = <79>;
};
diff --git a/Bindings/crypto/allwinner,sun8i-ce.yaml b/Bindings/crypto/allwinner,sun8i-ce.yaml
index 4287678..da47b60 100644
--- a/Bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Bindings/crypto/allwinner,sun8i-ce.yaml
@@ -18,6 +18,7 @@
- allwinner,sun50i-a64-crypto
- allwinner,sun50i-h5-crypto
- allwinner,sun50i-h6-crypto
+ - allwinner,sun50i-h616-crypto
reg:
maxItems: 1
@@ -49,6 +50,7 @@
compatible:
enum:
- allwinner,sun20i-d1-crypto
+ - allwinner,sun50i-h616-crypto
then:
properties:
clocks:
diff --git a/Bindings/display/amlogic,meson-dw-hdmi.yaml b/Bindings/display/amlogic,meson-dw-hdmi.yaml
index 0c85894..84d68b8 100644
--- a/Bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -71,6 +71,10 @@
- const: iahb
- const: venci
+ power-domains:
+ maxItems: 1
+ description: phandle to the associated power domain
+
resets:
minItems: 3
@@ -129,6 +133,7 @@
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
clock-names = "isfr", "iahb", "venci";
+ power-domains = <&pd_vpu>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Bindings/display/bridge/synopsys,dw-hdmi.yaml b/Bindings/display/bridge/synopsys,dw-hdmi.yaml
index 4b7e54a..3348138 100644
--- a/Bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -45,6 +45,19 @@
- const: isfr
additionalItems: true
+ ddc-i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+ description:
+ The HDMI DDC bus can be connected to either a system I2C master or the
+ functionally-reduced I2C master contained in the DWC HDMI. When connected
+ to a system I2C master this property contains a phandle to that I2C
+ master controller.
+
+ This property is deprecated, the system I2C master controller should
+ be referenced through the ddc-i2c-bus property of the HDMI connector
+ node.
+
interrupts:
maxItems: 1
diff --git a/Bindings/display/bridge/toshiba,tc358767.yaml b/Bindings/display/bridge/toshiba,tc358767.yaml
index ae894d9..2ad0cd6 100644
--- a/Bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Bindings/display/bridge/toshiba,tc358767.yaml
@@ -25,8 +25,8 @@
reg:
enum:
- - 0x68
- 0x0f
+ - 0x68
description: |
i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
diff --git a/Bindings/display/imx/fsl,imx6-hdmi.yaml b/Bindings/display/imx/fsl,imx6-hdmi.yaml
index 7979cf0..180c4b5 100644
--- a/Bindings/display/imx/fsl,imx6-hdmi.yaml
+++ b/Bindings/display/imx/fsl,imx6-hdmi.yaml
@@ -31,14 +31,6 @@
clock-names:
maxItems: 2
- ddc-i2c-bus:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- The HDMI DDC bus can be connected to either a system I2C master or the
- functionally-reduced I2C master contained in the DWC HDMI. When connected
- to a system I2C master this property contains a phandle to that I2C
- master controller.
-
gpr:
$ref: /schemas/types.yaml#/definitions/phandle
description:
diff --git a/Bindings/display/mediatek/mediatek,aal.yaml b/Bindings/display/mediatek/mediatek,aal.yaml
index b4c28e9..cf24434 100644
--- a/Bindings/display/mediatek/mediatek,aal.yaml
+++ b/Bindings/display/mediatek/mediatek,aal.yaml
@@ -36,6 +36,7 @@
- mediatek,mt8188-disp-aal
- mediatek,mt8192-disp-aal
- mediatek,mt8195-disp-aal
+ - mediatek,mt8365-disp-aal
- const: mediatek,mt8183-disp-aal
reg:
diff --git a/Bindings/display/mediatek/mediatek,ccorr.yaml b/Bindings/display/mediatek/mediatek,ccorr.yaml
index 8c2a737..9f83667 100644
--- a/Bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/Bindings/display/mediatek/mediatek,ccorr.yaml
@@ -25,6 +25,9 @@
- mediatek,mt8183-disp-ccorr
- mediatek,mt8192-disp-ccorr
- items:
+ - const: mediatek,mt8365-disp-ccorr
+ - const: mediatek,mt8183-disp-ccorr
+ - items:
- enum:
- mediatek,mt8186-disp-ccorr
- mediatek,mt8188-disp-ccorr
diff --git a/Bindings/display/mediatek/mediatek,color.yaml b/Bindings/display/mediatek/mediatek,color.yaml
index b886ca0..7df786b 100644
--- a/Bindings/display/mediatek/mediatek,color.yaml
+++ b/Bindings/display/mediatek/mediatek,color.yaml
@@ -40,6 +40,7 @@
- mediatek,mt8188-disp-color
- mediatek,mt8192-disp-color
- mediatek,mt8195-disp-color
+ - mediatek,mt8365-disp-color
- const: mediatek,mt8173-disp-color
reg:
maxItems: 1
diff --git a/Bindings/display/mediatek/mediatek,dither.yaml b/Bindings/display/mediatek/mediatek,dither.yaml
index 1588b3f..6fceb1f 100644
--- a/Bindings/display/mediatek/mediatek,dither.yaml
+++ b/Bindings/display/mediatek/mediatek,dither.yaml
@@ -30,6 +30,7 @@
- mediatek,mt8188-disp-dither
- mediatek,mt8192-disp-dither
- mediatek,mt8195-disp-dither
+ - mediatek,mt8365-disp-dither
- const: mediatek,mt8183-disp-dither
reg:
diff --git a/Bindings/display/mediatek/mediatek,dpi.yaml b/Bindings/display/mediatek/mediatek,dpi.yaml
index 803c00f..5ca7679 100644
--- a/Bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Bindings/display/mediatek/mediatek,dpi.yaml
@@ -31,6 +31,10 @@
- enum:
- mediatek,mt6795-dpi
- const: mediatek,mt8183-dpi
+ - items:
+ - enum:
+ - mediatek,mt8365-dpi
+ - const: mediatek,mt8192-dpi
reg:
maxItems: 1
diff --git a/Bindings/display/mediatek/mediatek,dsi.yaml b/Bindings/display/mediatek/mediatek,dsi.yaml
index 8611319..a7aa8fc 100644
--- a/Bindings/display/mediatek/mediatek,dsi.yaml
+++ b/Bindings/display/mediatek/mediatek,dsi.yaml
@@ -37,6 +37,7 @@
- items:
- enum:
- mediatek,mt8195-dsi
+ - mediatek,mt8365-dsi
- const: mediatek,mt8183-dsi
reg:
diff --git a/Bindings/display/mediatek/mediatek,gamma.yaml b/Bindings/display/mediatek/mediatek,gamma.yaml
index b8b8e83..6823d3c 100644
--- a/Bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Bindings/display/mediatek/mediatek,gamma.yaml
@@ -35,6 +35,7 @@
- mediatek,mt8188-disp-gamma
- mediatek,mt8192-disp-gamma
- mediatek,mt8195-disp-gamma
+ - mediatek,mt8365-disp-gamma
- const: mediatek,mt8183-disp-gamma
- items:
- enum:
diff --git a/Bindings/display/mediatek/mediatek,ovl.yaml b/Bindings/display/mediatek/mediatek,ovl.yaml
index c471a18..d55611c 100644
--- a/Bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Bindings/display/mediatek/mediatek,ovl.yaml
@@ -44,6 +44,7 @@
- items:
- enum:
- mediatek,mt8186-disp-ovl
+ - mediatek,mt8365-disp-ovl
- const: mediatek,mt8192-disp-ovl
reg:
diff --git a/Bindings/display/mediatek/mediatek,rdma.yaml b/Bindings/display/mediatek/mediatek,rdma.yaml
index 39dbb5c..4cadb24 100644
--- a/Bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Bindings/display/mediatek/mediatek,rdma.yaml
@@ -45,6 +45,7 @@
- enum:
- mediatek,mt8186-disp-rdma
- mediatek,mt8192-disp-rdma
+ - mediatek,mt8365-disp-rdma
- const: mediatek,mt8183-disp-rdma
reg:
diff --git a/Bindings/display/msm/dsi-controller-main.yaml b/Bindings/display/msm/dsi-controller-main.yaml
index 1fa28e9..b0fd96b 100644
--- a/Bindings/display/msm/dsi-controller-main.yaml
+++ b/Bindings/display/msm/dsi-controller-main.yaml
@@ -32,6 +32,7 @@
- qcom,sm6125-dsi-ctrl
- qcom,sm6350-dsi-ctrl
- qcom,sm6375-dsi-ctrl
+ - qcom,sm7150-dsi-ctrl
- qcom,sm8150-dsi-ctrl
- qcom,sm8250-dsi-ctrl
- qcom,sm8350-dsi-ctrl
@@ -162,6 +163,22 @@
items:
enum: [ 0, 1, 2, 3 ]
+ qcom,te-source:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Specifies the source of vsync signal from the panel used for
+ tearing elimination.
+ default: mdp_vsync_p
+ enum:
+ - mdp_vsync_p
+ - mdp_vsync_s
+ - mdp_vsync_e
+ - timer0
+ - timer1
+ - timer2
+ - timer3
+ - timer4
+
required:
- port@0
- port@1
@@ -332,6 +349,7 @@
enum:
- qcom,sc7180-dsi-ctrl
- qcom,sc7280-dsi-ctrl
+ - qcom,sm7150-dsi-ctrl
- qcom,sm8150-dsi-ctrl
- qcom,sm8250-dsi-ctrl
- qcom,sm8350-dsi-ctrl
@@ -452,6 +470,7 @@
dsi0_out: endpoint {
remote-endpoint = <&sn65dsi86_in>;
data-lanes = <0 1 2 3>;
+ qcom,te-source = "mdp_vsync_e";
};
};
};
diff --git a/Bindings/display/msm/dsi-phy-28nm.yaml b/Bindings/display/msm/dsi-phy-28nm.yaml
index 288d8ba..a55c244 100644
--- a/Bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Bindings/display/msm/dsi-phy-28nm.yaml
@@ -16,6 +16,7 @@
compatible:
enum:
- qcom,dsi-phy-28nm-8226
+ - qcom,dsi-phy-28nm-8937
- qcom,dsi-phy-28nm-8960
- qcom,dsi-phy-28nm-hpm
- qcom,dsi-phy-28nm-hpm-fam-b
diff --git a/Bindings/display/msm/gmu.yaml b/Bindings/display/msm/gmu.yaml
index b383736..b1bd372 100644
--- a/Bindings/display/msm/gmu.yaml
+++ b/Bindings/display/msm/gmu.yaml
@@ -23,6 +23,9 @@
- items:
- pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$'
- const: qcom,adreno-gmu
+ - items:
+ - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$'
+ - const: qcom,adreno-gmu
- const: qcom,adreno-gmu-wrapper
reg:
@@ -225,6 +228,7 @@
- qcom,adreno-gmu-730.1
- qcom,adreno-gmu-740.1
- qcom,adreno-gmu-750.1
+ - qcom,adreno-gmu-x185.1
then:
properties:
reg:
diff --git a/Bindings/display/msm/gpu.yaml b/Bindings/display/msm/gpu.yaml
index 40b5c6b..6ddc72f 100644
--- a/Bindings/display/msm/gpu.yaml
+++ b/Bindings/display/msm/gpu.yaml
@@ -10,6 +10,18 @@
maintainers:
- Rob Clark <robdclark@gmail.com>
+# dtschema does not select nodes based on pattern+const, so add custom select
+# as a work-around:
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno
+ - amd,imageon
+ required:
+ - compatible
+
properties:
compatible:
oneOf:
@@ -17,7 +29,7 @@
The driver is parsing the compat string for Adreno to
figure out the chip-id.
items:
- - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$'
+ - pattern: '^qcom,adreno-[0-9a-f]{8}$'
- const: qcom,adreno
- description: |
The driver is parsing the compat string for Adreno to
@@ -32,9 +44,13 @@
- pattern: '^amd,imageon-200\.[0-1]$'
- const: amd,imageon
- clocks: true
+ clocks:
+ minItems: 2
+ maxItems: 7
- clock-names: true
+ clock-names:
+ minItems: 2
+ maxItems: 7
reg:
minItems: 1
@@ -42,7 +58,10 @@
reg-names:
minItems: 1
- maxItems: 3
+ items:
+ - const: kgsl_3d0_reg_memory
+ - const: cx_mem
+ - const: cx_dbgc
interrupts:
maxItems: 1
diff --git a/Bindings/display/msm/qcom,mdp5.yaml b/Bindings/display/msm/qcom,mdp5.yaml
index 91c774f..e153f8d 100644
--- a/Bindings/display/msm/qcom,mdp5.yaml
+++ b/Bindings/display/msm/qcom,mdp5.yaml
@@ -25,6 +25,7 @@
- qcom,msm8226-mdp5
- qcom,msm8916-mdp5
- qcom,msm8917-mdp5
+ - qcom,msm8937-mdp5
- qcom,msm8953-mdp5
- qcom,msm8974-mdp5
- qcom,msm8976-mdp5
diff --git a/Bindings/display/msm/qcom,mdss.yaml b/Bindings/display/msm/qcom,mdss.yaml
index e457654..7c6462c 100644
--- a/Bindings/display/msm/qcom,mdss.yaml
+++ b/Bindings/display/msm/qcom,mdss.yaml
@@ -126,6 +126,7 @@
- qcom,dsi-phy-14nm-8953
- qcom,dsi-phy-20nm
- qcom,dsi-phy-28nm-8226
+ - qcom,dsi-phy-28nm-8937
- qcom,dsi-phy-28nm-hpm
- qcom,dsi-phy-28nm-hpm-fam-b
- qcom,dsi-phy-28nm-lp
diff --git a/Bindings/display/msm/qcom,sm7150-dpu.yaml b/Bindings/display/msm/qcom,sm7150-dpu.yaml
new file mode 100644
index 0000000..c79b2d4
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm7150-dpu.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display Processing Unit (DPU)
+
+maintainers:
+ - Danila Tikhonov <danila@jiaxyga.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm7150-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display ahb clock
+ - description: Display rotator clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: rot
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm7150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc_disp_hf_axi_clk>,
+ <&dispcc_mdss_ahb_clk>,
+ <&dispcc_mdss_rot_clk>,
+ <&dispcc_mdss_mdp_lut_clk>,
+ <&dispcc_mdss_mdp_clk>,
+ <&dispcc_mdss_vsync_clk>;
+ clock-names = "bus",
+ "iface",
+ "rot",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-344000000 {
+ opp-hz = /bits/ 64 <344000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-430000000 {
+ opp-hz = /bits/ 64 <430000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm7150-mdss.yaml b/Bindings/display/msm/qcom,sm7150-mdss.yaml
new file mode 100644
index 0000000..13c5d5f
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm7150-mdss.yaml
@@ -0,0 +1,458 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display MDSS
+
+maintainers:
+ - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+ SM7150 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm7150-mdss
+
+ clocks:
+ items:
+ - description: Display ahb clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+ - const: cpu-cfg
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm7150-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm7150-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm7150-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sm7150-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm7150-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc_mdss_gdsc>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&gcc_disp_sf_axi_clk>,
+ <&dispcc_mdss_mdp_clk>;
+ clock-names = "iface",
+ "bus",
+ "nrt_bus",
+ "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
+
+ iommus = <&apps_smmu 0x800 0x440>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm7150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc_disp_hf_axi_clk>,
+ <&dispcc_mdss_ahb_clk>,
+ <&dispcc_mdss_rot_clk>,
+ <&dispcc_mdss_mdp_lut_clk>,
+ <&dispcc_mdss_mdp_clk>,
+ <&dispcc_mdss_vsync_clk>;
+ clock-names = "bus",
+ "iface",
+ "rot",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-344000000 {
+ opp-hz = /bits/ 64 <344000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-430000000 {
+ opp-hz = /bits/ 64 <430000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm7150-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc_mdss_byte0_clk>,
+ <&dispcc_mdss_byte0_intf_clk>,
+ <&dispcc_mdss_pclk0_clk>,
+ <&dispcc_mdss_esc0_clk>,
+ <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_mdss_byte0_clk_src>,
+ <&dispcc_mdss_pclk0_clk_src>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm7150-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc_mdss_byte1_clk>,
+ <&dispcc_mdss_byte1_intf_clk>,
+ <&dispcc_mdss_pclk1_clk>,
+ <&dispcc_mdss_esc1_clk>,
+ <&dispcc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_mdss_byte1_clk_src>,
+ <&dispcc_mdss_pclk1_clk_src>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vdda_mipi_dsi1_pll>;
+ };
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,sm7150-dp";
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&dispcc_mdss_dp_aux_clk>,
+ <&dispcc_mdss_dp_link_clk>,
+ <&dispcc_mdss_dp_link_intf_clk>,
+ <&dispcc_mdss_dp_pixel_clk>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc_mdss_dp_link_clk_src>,
+ <&dispcc_mdss_dp_pixel_clk_src>;
+ assigned-clock-parents = <&dp_phy 0>,
+ <&dp_phy 1>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint {
+ };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/boe,tv101wum-nl6.yaml b/Bindings/display/panel/boe,tv101wum-nl6.yaml
index 9e603ca..7a9f49e 100644
--- a/Bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -32,8 +32,6 @@
- innolux,hj110iz-01a
# STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
- starry,2081101qfh032011-53g
- # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
- - starry,himax83102-j02
# STARRY ili9882t 10.51" WUXGA TFT LCD panel
- starry,ili9882t
diff --git a/Bindings/display/panel/himax,hx83102.yaml b/Bindings/display/panel/himax,hx83102.yaml
new file mode 100644
index 0000000..c649fb0
--- /dev/null
+++ b/Bindings/display/panel/himax,hx83102.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83102 MIPI-DSI LCD panel controller
+
+maintainers:
+ - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # Boe nv110wum-l60 11.0" WUXGA TFT LCD panel
+ - boe,nv110wum-l60
+ # IVO t109nw41 11.0" WUXGA TFT LCD panel
+ - ivo,t109nw41
+ # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+ - starry,himax83102-j02
+ - const: himax,hx83102
+
+ reg:
+ description: the virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: a GPIO spec for the enable pin
+
+ pp1800-supply:
+ description: core voltage supply
+
+ avdd-supply:
+ description: phandle of the regulator that provides positive voltage
+
+ avee-supply:
+ description: phandle of the regulator that provides negative voltage
+
+ backlight: true
+ port: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "starry,himax83102-j02", "himax,hx83102";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9806e.yaml b/Bindings/display/panel/ilitek,ili9806e.yaml
new file mode 100644
index 0000000..cfd7cc9
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9806e.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9806E based MIPI-DSI panels
+
+maintainers:
+ - Michael Walle <mwalle@kernel.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - ortustech,com35h3p70ulc
+ - const: ilitek,ili9806e
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+ vccio-supply: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vccio-supply
+ - reset-gpios
+ - backlight
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "ortustech,com35h3p70ulc", "ilitek,ili9806e";
+ reg = <0>;
+ vdd-supply = <®_vdd_panel>;
+ vccio-supply = <®_vccio_panel>;
+ reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jadard,jd9365da-h3.yaml b/Bindings/display/panel/jadard,jd9365da-h3.yaml
index 20afdb4..3d5bede 100644
--- a/Bindings/display/panel/jadard,jd9365da-h3.yaml
+++ b/Bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -17,6 +17,7 @@
items:
- enum:
- chongzhou,cz101b4001
+ - kingdisplay,kd101ne3-40ti
- radxa,display-10hd-ad001
- radxa,display-8hd-ad002
- const: jadard,jd9365da-h3
diff --git a/Bindings/display/panel/lg,sw43408.yaml b/Bindings/display/panel/lg,sw43408.yaml
index 1e08648..bbaaa78 100644
--- a/Bindings/display/panel/lg,sw43408.yaml
+++ b/Bindings/display/panel/lg,sw43408.yaml
@@ -21,7 +21,9 @@
items:
- const: lg,sw43408
- reg: true
+ reg:
+ maxItems: 1
+
port: true
vddi-supply: true
vpnl-supply: true
diff --git a/Bindings/display/panel/panel-edp-legacy.yaml b/Bindings/display/panel/panel-edp-legacy.yaml
new file mode 100644
index 0000000..b308047
--- /dev/null
+++ b/Bindings/display/panel/panel-edp-legacy.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy eDP panels from before the "edp-panel" compatible
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description: |
+ This binding file is a collection of eDP panels from before the generic
+ "edp-panel" compatible was introduced. It is kept around to support old
+ dts files. The only reason one might add a new panel here instead of using
+ the generic "edp-panel" is if it needed to be used on an eDP controller
+ that doesn't support the generic "edp-panel" compatible, but it should be
+ a strong preference to add the generic "edp-panel" compatible instead.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+ - auo,b101ean01
+ # AUO B116XAK01 eDP TFT LCD panel
+ - auo,b116xa01
+ # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+ - auo,b133htn01
+ # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+ - auo,b133xtn01
+ # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+ - boe,nv101wxmn51
+ # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+ - boe,nv110wtm-n61
+ # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+ - boe,nv133fhm-n61
+ # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+ - boe,nv133fhm-n62
+ # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+ - boe,nv140fhmn49
+ # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+ - innolux,n116bca-ea1
+ # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+ - innolux,n116bge
+ # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+ - innolux,n125hce-gn1
+ # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+ - innolux,p120zdg-bf1
+ # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+ - kingdisplay,kd116n21-30nv-a010
+ # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+ - lg,lp079qx1-sp0v
+ # LG 9.7" (2048x1536 pixels) TFT LCD panel
+ - lg,lp097qx1-spa1
+ # LG 12.0" (1920x1280 pixels) TFT LCD panel
+ - lg,lp120up1
+ # LG 12.9" (2560x1700 pixels) TFT LCD panel
+ - lg,lp129qe
+ # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+ - neweast,wjfh116008a
+ # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+ - samsung,lsn122dl01-c01
+ # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+ - samsung,ltn140at29-301
+ # Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+ - sharp,ld-d5116z01b
+ # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+ - sharp,lq123p1jx31
+
+ backlight: true
+ ddc-i2c-bus: true
+ enable-gpios: true
+ panel-timing: true
+ port: true
+ power-supply: true
+ no-hpd: true
+ hpd-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+examples:
+ - |
+ panel: panel {
+ compatible = "innolux,n116bge";
+ power-supply = <&panel_regulator>;
+ backlight = <&backlight>;
+
+ panel-timing {
+ clock-frequency = <74250000>;
+ hactive = <1366>;
+ hfront-porch = <136>;
+ hback-porch = <60>;
+ hsync-len = <30>;
+ hsync-active = <0>;
+ vactive = <768>;
+ vfront-porch = <8>;
+ vback-porch = <12>;
+ vsync-len = <12>;
+ vsync-active = <0>;
+ };
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
index d0ac31a..6f0290c 100644
--- a/Bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -50,6 +50,12 @@
| Command or data |
|<D7><D6><D5><D4><D3><D2><D1><D0>|
+ The standard defines one pixel format for type C: RGB111. The industry
+ however has decided to provide the type A/B interface pixel formats also on
+ the Type C interface and most common among these are RGB565 and RGB666.
+ The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR
+ order. This gives each supported RGB format a BGR variant.
+
The panel resolution is specified using the panel-timing node properties
hactive (width) and vactive (height). The other mandatory panel-timing
properties should be set to zero except clock-frequency which can be
@@ -93,6 +99,28 @@
spi-3wire: true
+ format:
+ description: >
+ Pixel format in bit order as going on the wire:
+ * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte
+ * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte
+ * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte
+ * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte
+ * `r5g6b5` - RGB565, 2 bytes
+ * `b5g6r5` - BGR565, 2 bytes
+ * `r6x2g6x2b6x2` - RGB666, 3 bytes
+ * `b6x2g6x2r6x2` - BGR666, 3 bytes
+ enum:
+ - x2r1g1b1r1g1b1
+ - x2b1g1r1b1g1r1
+ - x1r1g1b1x1r1g1b1
+ - x1b1g1r1x1b1g1r1
+ - r5g6b5
+ - b5g6r5
+ - r6x2g6x2b6x2
+ - b6x2g6x2r6x2
+ default: r5g6b5
+
required:
- compatible
- reg
@@ -119,6 +147,8 @@
reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
write-only;
+ format = "r5g6b5";
+
backlight = <&backlight>;
width-mm = <35>;
diff --git a/Bindings/display/panel/panel-simple-dsi.yaml b/Bindings/display/panel/panel-simple-dsi.yaml
index db5acd2..9b92a05 100644
--- a/Bindings/display/panel/panel-simple-dsi.yaml
+++ b/Bindings/display/panel/panel-simple-dsi.yaml
@@ -46,6 +46,8 @@
- lg,ld070wx3-sl01
# LG Corporation 5" HD TFT LCD panel
- lg,lh500wx1-sd03
+ # Lincoln LCD197 5" 1080x1920 LCD panel
+ - lincolntech,lcd197
# One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
- osddisplays,osd101t2587-53ts
# Panasonic 10" WUXGA TFT LCD panel
diff --git a/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
index 716ece5..e78160d 100644
--- a/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
+++ b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
@@ -41,6 +41,12 @@
- auo,g190ean01
# Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
- koe,tx26d202vm0bwa
+ # Lincoln Technology Solutions, LCD185-101CT 10.1" TFT 1920x1200
+ - lincolntech,lcd185-101ct
+ # Microtips Technology MF-101HIEBCAF0 10.1" WUXGA (1920x1200) TFT LCD panel
+ - microtips,mf-101hiebcaf0
+ # Microtips Technology MF-103HIEB0GA0 10.25" 1920x720 TFT LCD panel
+ - microtips,mf-103hieb0ga0
# NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
- nlt,nl192108ac18-02d
diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
index 5067f5c..8a87e01 100644
--- a/Bindings/display/panel/panel-simple.yaml
+++ b/Bindings/display/panel/panel-simple.yaml
@@ -41,28 +41,18 @@
- ampire,am800600p5tmqw-tb8h
# AU Optronics Corporation 10.1" WSVGA TFT LCD panel
- auo,b101aw03
- # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
- - auo,b101ean01
# AU Optronics Corporation 10.1" WXGA TFT LCD panel
- auo,b101xtn01
- # AUO B116XAK01 eDP TFT LCD panel
- - auo,b116xa01
# AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
- auo,b116xw03
- # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
- - auo,b133han05
- # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
- - auo,b133htn01
- # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
- - auo,b133xtn01
- # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
- - auo,b140han06
# AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
- auo,g070vvn01
# AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
- auo,g101evn010
# AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
- auo,g104sn02
+ # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+ - auo,g104stn01
# AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
- auo,g121ean01
# AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
@@ -81,16 +71,6 @@
- boe,ev121wxm-n10-1850
# BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
- boe,hv070wsa-100
- # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
- - boe,nv101wxmn51
- # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
- - boe,nv110wtm-n61
- # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
- - boe,nv133fhm-n61
- # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
- - boe,nv133fhm-n62
- # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
- - boe,nv140fhmn49
# Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel
- cct,cmt430b19n00
# CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
@@ -172,8 +152,6 @@
- hannstar,hsd100pxn1
# Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
- hit,tx23d38vm0caa
- # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
- - ivo,m133nwf4-r0
# Innolux AT043TN24 4.3" WQVGA TFT LCD panel
- innolux,at043tn24
# Innolux AT070TN92 7.0" WQVGA TFT LCD panel
@@ -192,22 +170,12 @@
- innolux,g121x1-l03
# Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
- innolux,g121xce-l01
- # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
- - innolux,n116bca-ea1
- # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
- - innolux,n116bge
- # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
- - innolux,n125hce-gn1
# InnoLux 15.6" FHD (1920x1080) TFT LCD panel
- innolux,g156hce-l01
# InnoLux 15.6" WXGA TFT LCD panel
- innolux,n156bge-l21
- # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
- - innolux,p120zdg-bf1
# Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
- innolux,zj070na-01p
- # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
- - kingdisplay,kd116n21-30nv-a010
# Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
- koe,tx14d24vm1bpa
# Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
@@ -220,14 +188,6 @@
- lemaker,bl035-rgb-002
# LG 7" (800x480 pixels) TFT LCD panel
- lg,lb070wv8
- # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
- - lg,lp079qx1-sp0v
- # LG 9.7" (2048x1536 pixels) TFT LCD panel
- - lg,lp097qx1-spa1
- # LG 12.0" (1920x1280 pixels) TFT LCD panel
- - lg,lp120up1
- # LG 12.9" (2560x1700 pixels) TFT LCD panel
- - lg,lp129qe
# Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
- logictechno,lt161010-2nhc
# Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
@@ -254,8 +214,6 @@
- nec,nl4827hc19-05b
# Netron-DY E231732 7.0" WSVGA TFT LCD panel
- netron-dy,e231732
- # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
- - neweast,wjfh116008a
# Newhaven Display International 480 x 272 TFT LCD panel
- newhaven,nhd-4.3-480272ef-atxl
# New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
@@ -280,6 +238,8 @@
- powertip,ph128800t006-zhc01
# POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
- powertip,ph800480t013-idf02
+ # PrimeView PM070WL4 7.0" 800x480 TFT LCD panel
+ - primeview,pm070wl4
# QiaoDian XianShi Corporation 4"3 TFT LCD panel
- qiaodian,qd43003c0-40
# Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
@@ -290,16 +250,10 @@
- rocktech,rk070er9427
# Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
- rocktech,rk043fn48h
- # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
- - samsung,atna33xc20
- # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
- - samsung,lsn122dl01-c01
# Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
- samsung,ltl101al01
# Samsung Electronics 10.1" WSVGA TFT LCD panel
- samsung,ltn101nt05
- # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
- - samsung,ltn140at29-301
# Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
- satoz,sat050at40h12r2
# Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
@@ -308,18 +262,12 @@
- sharp,lq070y3dg3b
# Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
- sharp,lq101k1ly04
- # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
- - sharp,lq123p1jx31
- # Sharp 14" (1920x1080 pixels) TFT LCD panel
- - sharp,lq140m1jw46
# Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
- sharp,ls020b1dd01d
# Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
- shelly,sca07010-bfn-lnn
# Starry KR070PE2T 7" WVGA TFT LCD panel
- starry,kr070pe2t
- # Starry 12.2" (1920x1200 pixels) TFT LCD panel
- - starry,kr122ea0sra
# Startek KD070WVFPA043-C069A 7" TFT LCD panel
- startek,kd070wvfpa
# Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
diff --git a/Bindings/display/panel/raydium,rm69380.yaml b/Bindings/display/panel/raydium,rm69380.yaml
index b17765b..ec445ff 100644
--- a/Bindings/display/panel/raydium,rm69380.yaml
+++ b/Bindings/display/panel/raydium,rm69380.yaml
@@ -28,6 +28,9 @@
to work with the indicated panel. The raydium,rm69380 compatible shall
always be provided as a fallback.
+ reg:
+ maxItems: 1
+
avdd-supply:
description: Analog voltage rail
@@ -38,8 +41,6 @@
maxItems: 1
description: phandle of gpio for reset line - This should be active low
- reg: true
-
required:
- compatible
- reg
diff --git a/Bindings/display/panel/samsung,atna33xc20.yaml b/Bindings/display/panel/samsung,atna33xc20.yaml
new file mode 100644
index 0000000..5192c93
--- /dev/null
+++ b/Bindings/display/panel/samsung,atna33xc20.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,atna33xc20.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+ - const: samsung,atna33xc20
+ # Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel
+ - items:
+ - const: samsung,atna45af01
+ - const: samsung,atna33xc20
+
+ enable-gpios: true
+ port: true
+ power-supply: true
+ no-hpd: true
+ hpd-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - enable-gpios
+ - power-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&src_pp1800_s4a>;
+ vccio-supply = <&src_pp1800_s4a>;
+ vcca-supply = <&src_pp1200_l2a>;
+ vcc-supply = <&src_pp1200_l2a>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ clock-names = "refclk";
+
+ no-hpd;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "samsung,atna33xc20";
+ enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ power-supply = <&pp3300_dx_edp>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/sharp,ld-d5116z01b.yaml b/Bindings/display/panel/sharp,ld-d5116z01b.yaml
deleted file mode 100644
index fbb647e..0000000
--- a/Bindings/display/panel/sharp,ld-d5116z01b.yaml
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
-
-maintainers:
- - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
-
-allOf:
- - $ref: panel-common.yaml#
-
-properties:
- compatible:
- const: sharp,ld-d5116z01b
-
- power-supply: true
- backlight: true
- port: true
- no-hpd: true
-
-additionalProperties: false
-
-required:
- - compatible
- - power-supply
-
-...
diff --git a/Bindings/display/panel/wl-355608-a8.yaml b/Bindings/display/panel/wl-355608-a8.yaml
new file mode 100644
index 0000000..e552d01
--- /dev/null
+++ b/Bindings/display/panel/wl-355608-a8.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Ryan Walklin <ryan@testtoast.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: wl-355608-a8
+
+ reg:
+ maxItems: 1
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - reg
+ - port
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "wl-355608-a8";
+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+ backlight = <&backlight>;
+ power-supply = <®_lcd>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&tcon_lcd0_out_lcd>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 2aac622..9d09685 100644
--- a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -70,14 +70,6 @@
- vpll
- ref
- ddc-i2c-bus:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- The HDMI DDC bus can be connected to either a system I2C master or the
- functionally-reduced I2C master contained in the DWC HDMI. When connected
- to a system I2C master this property contains a phandle to that I2C
- master controller.
-
phys:
maxItems: 1
description: The HDMI PHY
diff --git a/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
index ccf79e7..ccd71c5 100644
--- a/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
+++ b/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -15,6 +15,7 @@
items:
- enum:
- rockchip,px30-mipi-dsi
+ - rockchip,rk3128-mipi-dsi
- rockchip,rk3288-mipi-dsi
- rockchip,rk3399-mipi-dsi
- rockchip,rk3568-mipi-dsi
@@ -77,6 +78,7 @@
contains:
enum:
- rockchip,px30-mipi-dsi
+ - rockchip,rk3128-mipi-dsi
- rockchip,rk3568-mipi-dsi
- rockchip,rv1126-mipi-dsi
diff --git a/Bindings/display/st,stm32mp25-lvds.yaml b/Bindings/display/st,stm32mp25-lvds.yaml
new file mode 100644
index 0000000..6736f93
--- /dev/null
+++ b/Bindings/display/st,stm32mp25-lvds.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32mp25-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 LVDS Display Interface Transmitter
+
+maintainers:
+ - Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
+ - Yannick Fertre <yannick.fertre@foss.st.com>
+
+description: |
+ The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
+ LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
+ onto the LVDS PHY.
+
+ It is composed of three sub blocks:
+ - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
+ pixels onto the data lanes of the PHY
+ - LVDS PHY: parallelize the data and drives the LVDS data lanes
+ - LVDS wrapper: handles top-level settings
+
+ The LVDS controller driver supports the following high-level features:
+ - FDP-Link-I and OpenLDI (v0.95) protocols
+ - Single-Link or Dual-Link operation
+ - Single-Display or Double-Display (with the same content duplicated on both)
+ - Flexible Bit-Mapping, including JEIDA and VESA
+ - RGB888 or RGB666 output
+ - Synchronous design, with one input pixel per clock cycle
+
+properties:
+ compatible:
+ const: st,stm32mp25-lvds
+
+ "#clock-cells":
+ const: 0
+ description:
+ Provides the internal LVDS PHY clock to the framework.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB peripheral clock
+ - description: Reference clock for the internal PLL
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: ref
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ LVDS input port node, connected to the LTDC RGB output port.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ LVDS output port node, connected to a panel or bridge input port.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+ #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+ lvds: lvds@48060000 {
+ compatible = "st,stm32mp25-lvds";
+ reg = <0x48060000 0x2000>;
+ #clock-cells = <0>;
+ clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+ clock-names = "pclk", "ref";
+ resets = <&rcc LVDS_R>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_in: endpoint {
+ remote-endpoint = <<dc_ep1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds_out0: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/dma/fsl,imx-dma.yaml b/Bindings/dma/fsl,imx-dma.yaml
new file mode 100644
index 0000000..902a11f
--- /dev/null
+++ b/Bindings/dma/fsl,imx-dma.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Direct Memory Access (DMA) Controller for i.MX
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx1-dma
+ - fsl,imx21-dma
+ - fsl,imx27-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: DMA complete interrupt
+ - description: DMA Error interrupt
+ minItems: 1
+
+ "#dma-cells":
+ const: 1
+
+ dma-channels:
+ const: 16
+
+ dma-requests:
+ description: Number of DMA requests supported.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ dma-controller@10001000 {
+ compatible = "fsl,imx27-dma";
+ reg = <0x10001000 0x1000>;
+ interrupts = <32 33>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
diff --git a/Bindings/dma/fsl-imx-dma.txt b/Bindings/dma/fsl-imx-dma.txt
deleted file mode 100644
index 1c9929d..0000000
--- a/Bindings/dma/fsl-imx-dma.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Freescale Direct Memory Access (DMA) Controller for i.MX
-
-This document will only describe differences to the generic DMA Controller and
-DMA request bindings as described in dma/dma.txt .
-
-* DMA controller
-
-Required properties:
-- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
-- reg : Should contain DMA registers location and length
-- interrupts : First item should be DMA interrupt, second one is optional and
- should contain DMA Error interrupt
-- #dma-cells : Has to be 1. imx-dma does not support anything else.
-
-Optional properties:
-- dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-channels : deprecated
-- dma-requests : Number of DMA requests supported.
-- #dma-requests : deprecated
-
-Example:
-
- dma: dma@10001000 {
- compatible = "fsl,imx27-dma";
- reg = <0x10001000 0x1000>;
- interrupts = <32 33>;
- #dma-cells = <1>;
- dma-channels = <16>;
- };
-
-
-* DMA client
-
-Clients have to specify the DMA requests with phandles in a list.
-
-Required properties:
-- dmas: List of one or more DMA request specifiers. One DMA request specifier
- consists of a phandle to the DMA controller followed by the integer
- specifying the request line.
-- dma-names: List of string identifiers for the DMA requests. For the correct
- names, have a look at the specific client driver.
-
-Example:
-
- sdhci1: sdhci@10013000 {
- ...
- dmas = <&dma 7>;
- dma-names = "rx-tx";
- ...
- };
diff --git a/Bindings/dma/fsl-qdma.txt b/Bindings/dma/fsl-qdma.txt
deleted file mode 100644
index da371c4..0000000
--- a/Bindings/dma/fsl-qdma.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP Layerscape SoC qDMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible: Must be one of
- "fsl,ls1021a-qdma": for LS1021A Board
- "fsl,ls1028a-qdma": for LS1028A Board
- "fsl,ls1043a-qdma": for ls1043A Board
- "fsl,ls1046a-qdma": for ls1046A Board
-- reg: Should contain the register's base address and length.
-- interrupts: Should contain a reference to the interrupt used by this
- device.
-- interrupt-names: Should contain interrupt names:
- "qdma-queue0": the block0 interrupt
- "qdma-queue1": the block1 interrupt
- "qdma-queue2": the block2 interrupt
- "qdma-queue3": the block3 interrupt
- "qdma-error": the error interrupt
-- fsl,dma-queues: Should contain number of queues supported.
-- dma-channels: Number of DMA channels supported
-- block-number: the virtual block number
-- block-offset: the offset of different virtual block
-- status-sizes: status queue size of per virtual block
-- queue-sizes: command queue size of per virtual block, the size number
- based on queues
-
-Optional properties:
-
-- dma-channels: Number of DMA channels supported by the controller.
-- big-endian: If present registers and hardware scatter/gather descriptors
- of the qDMA are implemented in big endian mode, otherwise in little
- mode.
-
-Examples:
-
- qdma: dma-controller@8390000 {
- compatible = "fsl,ls1021a-qdma";
- reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
- <0x0 0x8389000 0x0 0x1000>, /* Status regs */
- <0x0 0x838a000 0x0 0x2000>; /* Block regs */
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "qdma-error",
- "qdma-queue0", "qdma-queue1";
- dma-channels = <8>;
- block-number = <2>;
- block-offset = <0x1000>;
- fsl,dma-queues = <2>;
- status-sizes = <64>;
- queue-sizes = <64 64>;
- big-endian;
- };
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Bindings/dma/fsl-qdma.yaml b/Bindings/dma/fsl-qdma.yaml
new file mode 100644
index 0000000..1b9ebdb
--- /dev/null
+++ b/Bindings/dma/fsl-qdma.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl-qdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Layerscape SoC qDMA Controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1021a-qdma
+ - fsl,ls1028a-qdma
+ - fsl,ls1043a-qdma
+ - fsl,ls1046a-qdma
+
+ reg:
+ items:
+ - description: Controller regs
+ - description: Status regs
+ - description: Block regs
+
+ interrupts:
+ minItems: 2
+ maxItems: 5
+
+ interrupt-names:
+ minItems: 2
+ items:
+ - const: qdma-error
+ - const: qdma-queue0
+ - const: qdma-queue1
+ - const: qdma-queue2
+ - const: qdma-queue3
+
+ dma-channels:
+ minimum: 1
+ maximum: 64
+
+ fsl,dma-queues:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Should contain number of queues supported.
+ minimum: 1
+ maximum: 4
+
+ block-number:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: the virtual block number
+
+ block-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: the offset of different virtual block
+
+ status-sizes:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: status queue size of per virtual block
+
+ queue-sizes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ command queue size of per virtual block, the size number
+ based on queues
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - fsl,dma-queues
+ - block-number
+ - block-offset
+ - status-sizes
+ - queue-sizes
+
+allOf:
+ - $ref: dma-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1028a-qdma
+ - fsl,ls1043a-qdma
+ - fsl,ls1046a-qdma
+ then:
+ properties:
+ interrupts:
+ minItems: 5
+ interrupt-names:
+ minItems: 5
+ else:
+ properties:
+ interrupts:
+ maxItems: 3
+ interrupt-names:
+ maxItems: 3
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x8388000 0x1000>, /* Controller regs */
+ <0x8389000 0x1000>, /* Status regs */
+ <0x838a000 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1";
+ #dma-cells = <1>;
+ dma-channels = <8>;
+ block-number = <2>;
+ block-offset = <0x1000>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ fsl,dma-queues = <2>;
+ };
+
diff --git a/Bindings/dma/qcom,gpi.yaml b/Bindings/dma/qcom,gpi.yaml
index deb64cb..4df4e61 100644
--- a/Bindings/dma/qcom,gpi.yaml
+++ b/Bindings/dma/qcom,gpi.yaml
@@ -27,6 +27,7 @@
- qcom,qcm2290-gpi-dma
- qcom,qdu1000-gpi-dma
- qcom,sc7280-gpi-dma
+ - qcom,sdx75-gpi-dma
- qcom,sm6115-gpi-dma
- qcom,sm6375-gpi-dma
- qcom,sm8350-gpi-dma
diff --git a/Bindings/dma/sprd,sc9860-dma.yaml b/Bindings/dma/sprd,sc9860-dma.yaml
new file mode 100644
index 0000000..9464721
--- /dev/null
+++ b/Bindings/dma/sprd,sc9860-dma.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sprd,sc9860-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 DMA controller
+
+description: |
+ There are three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP
+ DMA controller, it can or do not request the IRQ, which will save
+ system power without resuming system by DMA interrupts if AGCP DMA
+ does not request the IRQ.
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ const: sprd,sc9860-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: DMA enable clock
+ - description: optional ashb_eb clock, only for the AGCP DMA controller
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: enable
+ - const: ashb_eb
+
+ '#dma-cells':
+ const: 1
+
+ dma-channels:
+ const: 32
+
+ '#dma-channels':
+ const: 32
+ deprecated: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#dma-cells'
+ - dma-channels
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sprd,sc9860-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ /* AP DMA controller */
+ dma-controller@20100000 {
+ compatible = "sprd,sc9860-dma";
+ reg = <0x20100000 0x4000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apahb_gate CLK_DMA_EB>;
+ clock-names = "enable";
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ };
+
+ /* AGCP DMA controller */
+ dma-controller@41580000 {
+ compatible = "sprd,sc9860-dma";
+ reg = <0x41580000 0x4000>;
+ clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+ <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+ clock-names = "enable", "ashb_eb";
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ };
+...
diff --git a/Bindings/dma/sprd-dma.txt b/Bindings/dma/sprd-dma.txt
deleted file mode 100644
index c7e9b5f..0000000
--- a/Bindings/dma/sprd-dma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Spreadtrum DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel.
-- #dma-cells: must be <1>. Used to represent the number of integer
- cells in the dmas property of client device.
-- dma-channels : Number of DMA channels supported. Should be 32.
-- clock-names: Should contain the clock of the DMA controller.
-- clocks: Should contain a clock specifier for each entry in clock-names.
-
-Deprecated properties:
-- #dma-channels : Number of DMA channels supported. Should be 32.
-
-Example:
-
-Controller:
-apdma: dma-controller@20100000 {
- compatible = "sprd,sc9860-dma";
- reg = <0x20100000 0x4000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- dma-channels = <32>;
- clock-names = "enable";
- clocks = <&clk_ap_ahb_gates 5>;
-};
-
-
-Client:
-DMA clients connected to the Spreadtrum DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The slave id.
-
-spi0: spi@70a00000{
- ...
- dma-names = "rx_chn", "tx_chn";
- dmas = <&apdma 11>, <&apdma 12>;
- ...
-};
diff --git a/Bindings/dma/st,stm32-dma.yaml b/Bindings/dma/stm32/st,stm32-dma.yaml
similarity index 96%
rename from Bindings/dma/st,stm32-dma.yaml
rename to Bindings/dma/stm32/st,stm32-dma.yaml
index ff935a0..11a289f 100644
--- a/Bindings/dma/st,stm32-dma.yaml
+++ b/Bindings/dma/stm32/st,stm32-dma.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 DMA Controller
@@ -53,7 +53,7 @@
- Amelie Delaunay <amelie.delaunay@foss.st.com>
allOf:
- - $ref: dma-controller.yaml#
+ - $ref: /schemas/dma/dma-controller.yaml#
properties:
"#dma-cells":
diff --git a/Bindings/dma/stm32/st,stm32-dma3.yaml b/Bindings/dma/stm32/st,stm32-dma3.yaml
new file mode 100644
index 0000000..7fdc44b
--- /dev/null
+++ b/Bindings/dma/stm32/st,stm32-dma3.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA3 Controller
+
+description: |
+ The STM32 DMA3 is a direct memory access controller with different features
+ depending on its hardware configuration.
+ It is either called LPDMA (Low Power), GPDMA (General Purpose) or HPDMA (High
+ Performance).
+ Its hardware configuration registers allow to dynamically expose its features.
+
+ GPDMA and HPDMA support 16 independent DMA channels, while only 4 for LPDMA.
+ GPDMA and HPDMA support 256 DMA requests from peripherals, 8 for LPDMA.
+
+ Bindings are generic for these 3 STM32 DMA3 configurations.
+
+ DMA clients connected to the STM32 DMA3 controller must use the format
+ described in "#dma-cells" property description below, using a three-cell
+ specifier for each channel.
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+ - $ref: /schemas/dma/dma-controller.yaml#
+
+properties:
+ compatible:
+ const: st,stm32mp25-dma3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 4
+ maxItems: 16
+ description:
+ Should contain all of the per-channel DMA interrupts in ascending order
+ with respect to the DMA channel index.
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 3
+ description: |
+ Specifies the number of cells needed to provide DMA controller specific
+ information.
+ The first cell is the request line number.
+ The second cell is a 32-bit mask specifying the DMA channel requirements:
+ -bit 0-1: The priority level
+ 0x0: low priority, low weight
+ 0x1: low priority, mid weight
+ 0x2: low priority, high weight
+ 0x3: high priority
+ -bit 4-7: The FIFO requirement for queuing source/destination transfers
+ 0x0: no FIFO requirement/any channel can fit
+ 0x2: FIFO of 8 bytes (2^2+1)
+ 0x4: FIFO of 32 bytes (2^4+1)
+ 0x6: FIFO of 128 bytes (2^6+1)
+ 0x7: FIFO of 256 bytes (2^7+1)
+ The third cell is a 32-bit mask specifying the DMA transfer requirements:
+ -bit 0: The source incrementing burst
+ 0x0: fixed burst
+ 0x1: contiguously incremented burst
+ -bit 1: The source allocated port
+ 0x0: port 0 is allocated to the source transfer
+ 0x1: port 1 is allocated to the source transfer
+ -bit 4: The destination incrementing burst
+ 0x0: fixed burst
+ 0x1: contiguously incremented burst
+ -bit 5: The destination allocated port
+ 0x0: port 0 is allocated to the destination transfer
+ 0x1: port 1 is allocated to the destination transfer
+ -bit 8: The type of hardware request
+ 0x0: burst
+ 0x1: block
+ -bit 9: The control mode
+ 0x0: DMA controller control mode
+ 0x1: peripheral control mode
+ -bit 12-13: The transfer complete event mode
+ 0x0: at block level, transfer complete event is generated at the end
+ of a block
+ 0x2: at LLI level, the transfer complete event is generated at the end
+ of the LLI transfer
+ including the update of the LLI if any
+ 0x3: at channel level, the transfer complete event is generated at the
+ end of the last LLI
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+ dma-controller@40400000 {
+ compatible = "st,stm32mp25-dma3";
+ reg = <0x40400000 0x1000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_BUS_HPDMA1>;
+ #dma-cells = <3>;
+ };
+...
diff --git a/Bindings/dma/st,stm32-dmamux.yaml b/Bindings/dma/stm32/st,stm32-dmamux.yaml
similarity index 90%
rename from Bindings/dma/st,stm32-dmamux.yaml
rename to Bindings/dma/stm32/st,stm32-dmamux.yaml
index ddf82bf..f26c914 100644
--- a/Bindings/dma/st,stm32-dmamux.yaml
+++ b/Bindings/dma/stm32/st,stm32-dmamux.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dmamux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 DMA MUX (DMA request router)
@@ -10,7 +10,7 @@
- Amelie Delaunay <amelie.delaunay@foss.st.com>
allOf:
- - $ref: dma-router.yaml#
+ - $ref: /schemas/dma/dma-router.yaml#
properties:
"#dma-cells":
diff --git a/Bindings/dma/st,stm32-mdma.yaml b/Bindings/dma/stm32/st,stm32-mdma.yaml
similarity index 96%
rename from Bindings/dma/st,stm32-mdma.yaml
rename to Bindings/dma/stm32/st,stm32-mdma.yaml
index 3874544..45fe91d 100644
--- a/Bindings/dma/st,stm32-mdma.yaml
+++ b/Bindings/dma/stm32/st,stm32-mdma.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-mdma.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 MDMA Controller
@@ -53,7 +53,7 @@
- Amelie Delaunay <amelie.delaunay@foss.st.com>
allOf:
- - $ref: dma-controller.yaml#
+ - $ref: /schemas/dma/dma-controller.yaml#
properties:
"#dma-cells":
diff --git a/Bindings/eeprom/at24.yaml b/Bindings/eeprom/at24.yaml
index 3c36cd0..e396e47 100644
--- a/Bindings/eeprom/at24.yaml
+++ b/Bindings/eeprom/at24.yaml
@@ -18,7 +18,9 @@
properties:
compatible:
contains:
- pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+ anyOf:
+ - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+ - enum: ["microchip,24aa025e48", "microchip,24aa025e64"]
required:
- compatible
@@ -103,9 +105,6 @@
# These are special cases that don't conform to the above pattern.
# Each requires a standard at24 model as fallback.
- items:
- - const: belling,bl24c16a
- - const: atmel,24c16
- - items:
- enum:
- rohm,br24g01
- rohm,br24t01
@@ -122,16 +121,25 @@
- rohm,br24g04
- const: atmel,24c04
- items:
- - const: renesas,r1ex24016
+ - enum:
+ - belling,bl24c16a
+ - renesas,r1ex24016
- const: atmel,24c16
- items:
- const: giantec,gt24c32a
- const: atmel,24c32
- items:
+ - const: onnn,n24s64b
+ - const: atmel,24c64
+ - items:
- enum:
- renesas,r1ex24128
- samsung,s524ad0xd1
- const: atmel,24c128
+ - items:
+ - const: microchip,24aa025e48
+ - items:
+ - const: microchip,24aa025e64
- pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st
label:
diff --git a/Bindings/firmware/arm,scmi.yaml b/Bindings/firmware/arm,scmi.yaml
index 7de2c29..4d823f3 100644
--- a/Bindings/firmware/arm,scmi.yaml
+++ b/Bindings/firmware/arm,scmi.yaml
@@ -72,14 +72,17 @@
- const: tx
- const: tx_reply
- const: rx
+ - const: rx_reply
minItems: 2
mboxes:
description:
List of phandle and mailbox channel specifiers. It should contain
- exactly one, two or three mailboxes; the first one or two for transmitting
- messages ("tx") and another optional ("rx") for receiving notifications
- and delayed responses, if supported by the platform.
+ exactly one, two, three or four mailboxes; the first one or two for
+ transmitting messages ("tx") and another optional ("rx") for receiving
+ notifications and delayed responses, if supported by the platform.
+ The optional ("rx_reply") is for notifications completion interrupt,
+ if supported by the platform.
The number of mailboxes needed for transmitting messages depends on the
type of channels exposed by the specific underlying mailbox controller;
one single channel descriptor is enough if such channel is bidirectional,
@@ -92,9 +95,10 @@
2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels
2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels
3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels
+ 4 mbox / 2 shmem => SCMI TX and RX over 4 mailbox unidirectional channels
Any other combination of mboxes and shmem is invalid.
minItems: 1
- maxItems: 3
+ maxItems: 4
shmem:
description:
@@ -251,7 +255,9 @@
type: object
allOf:
- $ref: '#/$defs/protocol-node'
- - $ref: /schemas/pinctrl/pinctrl.yaml
+ - anyOf:
+ - $ref: /schemas/pinctrl/pinctrl.yaml
+ - $ref: /schemas/firmware/nxp,imx95-scmi-pinctrl.yaml
unevaluatedProperties: false
diff --git a/Bindings/firmware/cznic,turris-omnia-mcu.yaml b/Bindings/firmware/cznic,turris-omnia-mcu.yaml
new file mode 100644
index 0000000..af92496
--- /dev/null
+++ b/Bindings/firmware/cznic,turris-omnia-mcu.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia MCU
+
+maintainers:
+ - Marek Behún <kabel@kernel.org>
+
+description:
+ The MCU on Turris Omnia acts as a system controller providing additional
+ GPIOs, interrupts, watchdog, system power off and wakeup configuration.
+
+properties:
+ compatible:
+ const: cznic,turris-omnia-mcu
+
+ reg:
+ description: MCU I2C slave address
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ The first cell specifies the interrupt number (0 to 63), the second cell
+ specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH).
+ The interrupt numbers correspond sequentially to GPIO numbers, taking the
+ GPIO banks into account:
+ IRQ number GPIO bank GPIO pin within bank
+ 0 - 15 0 0 - 15
+ 16 - 47 1 0 - 31
+ 48 - 63 2 0 - 15
+ There are several exceptions:
+ IRQ number meaning
+ 11 LED panel brightness changed by button press
+ 13 TRNG entropy ready
+ 14 ECDSA message signature computation done
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 3
+ description:
+ The first cell is bank number (0, 1 or 2), the second cell is pin number
+ within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the
+ third cell specifies consumer flags.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ system-controller@2a {
+ compatible = "cznic,turris-omnia-mcu";
+ reg = <0x2a>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_NONE>;
+
+ gpio-controller;
+ #gpio-cells = <3>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
diff --git a/Bindings/firmware/nxp,imx95-scmi-pinctrl.yaml b/Bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
new file mode 100644
index 0000000..a96fc6c
--- /dev/null
+++ b/Bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX System Control and Management Interface (SCMI) Pinctrl Protocol
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+allOf:
+ - $ref: /schemas/pinctrl/pinctrl.yaml
+
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ unevaluatedProperties: false
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm64/boot/dts/freescale/imx95-pinfunc.h>. The last
+ integer CONFIG is the pad setting value like pull-up on this pin.
+ Please refer to i.MX95 Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+ required:
+ - fsl,pins
+
+additionalProperties: true
diff --git a/Bindings/firmware/qcom,scm.yaml b/Bindings/firmware/qcom,scm.yaml
index 47d3d2d..2cc8377 100644
--- a/Bindings/firmware/qcom,scm.yaml
+++ b/Bindings/firmware/qcom,scm.yaml
@@ -93,6 +93,11 @@
protocol to handle sleeping SCM calls.
maxItems: 1
+ memory-region:
+ description:
+ Phandle to the memory region reserved for the shared memory bridge to TZ.
+ maxItems: 1
+
qcom,sdi-enabled:
description:
Indicates that the SDI (Secure Debug Image) has been enabled by TZ
@@ -193,6 +198,16 @@
then:
properties:
interrupts: false
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,scm-sa8775p
+ then:
+ properties:
+ memory-region: false
required:
- compatible
diff --git a/Bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644
index 0000000..dfcc2fa
--- /dev/null
+++ b/Bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The AST2600 and later contain two identical FSI masters. They share a
+ clock and have a separate interrupt line and output pins.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-fsi-master
+ - aspeed,ast2700-fsi-master
+
+ clocks:
+ maxItems: 1
+
+ cfam-reset-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for CFAM reset
+
+ fsi-routing-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for setting the FSI mux (internal or cabled)
+
+ fsi-mux-gpios:
+ maxItems: 1
+ description:
+ Input GPIO pin for detecting the desired FSI mux state
+
+ interrupts:
+ maxItems: 1
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - aspeed,ast2600-fsi-master
+then:
+ properties:
+ reg:
+ maxItems: 1
+else:
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: OPB control registers
+ - description: FSI controller registers
+ - description: FSI link address space
+ reg-names:
+ items:
+ - const: opb
+ - const: ctrl
+ - const: fsi
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ast2600-clock.h>
+ #include <dt-bindings/gpio/aspeed-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ fsi-master@1e79b000 {
+ compatible = "aspeed,ast2600-fsi-master";
+ reg = <0x1e79b000 0x94>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+ fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ fsi-master@21800000 {
+ compatible = "aspeed,ast2700-fsi-master";
+ reg = <0x0 0x21800000 0x0 0x100>,
+ <0x0 0x21000000 0x0 0x1000>,
+ <0x0 0x20000000 0x0 0x1000000>;
+ reg-names = "opb", "ctrl", "fsi";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts-extended = <&intc 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi0_default>;
+ clocks = <&syscon 40>;
+ };
+ };
diff --git a/Bindings/fsi/fsi-controller.yaml b/Bindings/fsi/fsi-controller.yaml
new file mode 100644
index 0000000..ffe1919
--- /dev/null
+++ b/Bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+ FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+ various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ bus-frequency:
+ minimum: 1
+ maximum: 200000000
+
+ interrupt-controller: true
+
+ no-scan-on-init:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+ "cfam@[0-9a-f],[0-9a-f]":
+ type: object
+ properties:
+ chip-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Processor index, a global unique chip ID which is used to identify
+ the physical location of the chip in a system specific way.
+
+ bus-frequency:
+ minimum: 1
+ maximum: 100000000
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ required:
+ - reg
+
+ additionalProperties: true
+
+additionalProperties: true
diff --git a/Bindings/fsi/fsi-master-aspeed.txt b/Bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644
index 9853fef..0000000
--- a/Bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
- fsi-master {
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
- reg = <0x1e79b000 0x94>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fsi1_default>;
- clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
- fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
- fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
- cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- };
diff --git a/Bindings/fsi/ibm,fsi2spi.yaml b/Bindings/fsi/ibm,fsi2spi.yaml
index e2ca0b0..ad5c83f 100644
--- a/Bindings/fsi/ibm,fsi2spi.yaml
+++ b/Bindings/fsi/ibm,fsi2spi.yaml
@@ -9,11 +9,10 @@
maintainers:
- Eddie James <eajames@linux.ibm.com>
-description: |
+description:
This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
- node will always be a child of an FSI CFAM node; see fsi.txt for details on
- FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
- SPI controllers.
+ node will always be a child of an FSI CFAM node. This FSI2SPI engine provides
+ access to a number of SPI controllers.
properties:
compatible:
@@ -24,6 +23,17 @@
items:
- description: FSI slave address
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^spi@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/spi/ibm,spi-fsi.yaml
+
required:
- compatible
- reg
@@ -35,4 +45,22 @@
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
};
diff --git a/Bindings/fsi/ibm,i2cr-fsi-master.yaml b/Bindings/fsi/ibm,i2cr-fsi-master.yaml
index 442cecd..e49ace3 100644
--- a/Bindings/fsi/ibm,i2cr-fsi-master.yaml
+++ b/Bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -26,7 +26,10 @@
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Bindings/fsi/ibm,p9-fsi-controller.yaml b/Bindings/fsi/ibm,p9-fsi-controller.yaml
new file mode 100644
index 0000000..29ea80f
--- /dev/null
+++ b/Bindings/fsi/ibm,p9-fsi-controller.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached FSI Hub Controller
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The FSI Hub Controller is an FSI controller, providing a number of FSI links,
+ located on a CFAM. Therefore this node will always be a child of an FSI CFAM
+ node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-fsi-controller
+
+ reg:
+ items:
+ - description: FSI slave address
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
diff --git a/Bindings/fsi/ibm,p9-occ.txt b/Bindings/fsi/ibm,p9-occ.txt
deleted file mode 100644
index e733580..0000000
--- a/Bindings/fsi/ibm,p9-occ.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
------------------------------------------------------------------------------
-
-This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
-a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
-nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE FIFO.
-
-Required properties:
- - compatible = "ibm,p9-occ" or "ibm,p10-occ"
-
-Examples:
-
- occ {
- compatible = "ibm,p9-occ";
- };
diff --git a/Bindings/fsi/ibm,p9-occ.yaml b/Bindings/fsi/ibm,p9-occ.yaml
new file mode 100644
index 0000000..537eac7
--- /dev/null
+++ b/Bindings/fsi/ibm,p9-occ.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached On-Chip Controller (OCC)
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The POWER processor On-Chip Controller (OCC) helps manage power and
+ thermals for the system, accessed through the FSI-attached SBEFIFO
+ from a service processor.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-occ
+ - ibm,p10-occ
+
+ hwmon:
+ type: object
+ $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ occ {
+ compatible = "ibm,p9-occ";
+
+ hwmon {
+ compatible = "ibm,p9-occ-hwmon";
+ };
+ };
diff --git a/Bindings/fsi/ibm,p9-sbefifo.yaml b/Bindings/fsi/ibm,p9-sbefifo.yaml
new file mode 100644
index 0000000..3cd966f
--- /dev/null
+++ b/Bindings/fsi/ibm,p9-sbefifo.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SBEFIFO engine
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The SBEFIFO is an FSI CFAM engine that provides an interface to the
+ POWER processor Self Boot Engine (SBE). This node will always be a child
+ of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-sbefifo
+ - ibm,odyssey-sbefifo
+
+ reg:
+ items:
+ - description: FSI slave address
+
+ occ:
+ type: object
+ $ref: ibm,p9-occ.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ fsi-slave-engine@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p9-occ";
+ };
+ };
diff --git a/Bindings/fsi/ibm,p9-scom.yaml b/Bindings/fsi/ibm,p9-scom.yaml
new file mode 100644
index 0000000..8cd14a7
--- /dev/null
+++ b/Bindings/fsi/ibm,p9-scom.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The SCOM engine is an interface to the POWER processor PIB (Pervasive
+ Interconnect Bus). This node will always be a child of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-scom
+ - ibm,i2cr-scom
+
+ reg:
+ items:
+ - description: FSI slave address
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
diff --git a/Bindings/fuse/renesas,rcar-efuse.yaml b/Bindings/fuse/renesas,rcar-efuse.yaml
new file mode 100644
index 0000000..d7e2892
--- /dev/null
+++ b/Bindings/fuse/renesas,rcar-efuse.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/renesas,rcar-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: R-Car E-FUSE connected to PFC
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The E-FUSE is a type of non-volatile memory, which is accessible through the
+ Pin Function Controller (PFC) on some R-Car Gen4 SoCs.
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a779a0-efuse # R-Car V3U
+ - renesas,r8a779f0-efuse # R-Car S4-8
+
+ reg:
+ maxItems: 1
+ description: PFC System Group Fuse Control and Monitor register block
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+ #include <dt-bindings/power/r8a779a0-sysc.h>
+
+ fuse: fuse@e6078800 {
+ compatible = "renesas,r8a779a0-efuse";
+ reg = <0xe6078800 0x100>;
+ clocks = <&cpg CPG_MOD 916>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ };
diff --git a/Bindings/fuse/renesas,rcar-otp.yaml b/Bindings/fuse/renesas,rcar-otp.yaml
new file mode 100644
index 0000000..d74872a
--- /dev/null
+++ b/Bindings/fuse/renesas,rcar-otp.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/renesas,rcar-otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: R-Car E-FUSE connected to OTP_MEM
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The E-FUSE is a type of non-volatile memory, which is accessible through the
+ One-Time Programmable Memory (OTP_MEM) module on some R-Car Gen4 SoCs.
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a779g0-otp # R-CarV4H
+ - renesas,r8a779h0-otp # R-CarV4M
+
+ reg:
+ items:
+ - description: OTP_MEM_0
+ - description: OTP_MEM_1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ otp: otp@e61be000 {
+ compatible = "renesas,r8a779g0-otp";
+ reg = <0xe61be000 0x1000>, <0xe61bf000 0x1000>;
+ };
diff --git a/Bindings/gpio/aspeed,sgpio.yaml b/Bindings/gpio/aspeed,sgpio.yaml
index 46bb121..1046f03 100644
--- a/Bindings/gpio/aspeed,sgpio.yaml
+++ b/Bindings/gpio/aspeed,sgpio.yaml
@@ -33,6 +33,11 @@
gpio-controller: true
+ # Each SGPIO is represented as a pair of input and output GPIOs
+ gpio-line-names:
+ minItems: 160
+ maxItems: 256
+
'#gpio-cells':
const: 2
@@ -41,6 +46,9 @@
interrupt-controller: true
+ '#interrupt-cells':
+ const: 2
+
clocks:
maxItems: 1
@@ -55,6 +63,7 @@
- '#gpio-cells'
- interrupts
- interrupt-controller
+ - '#interrupt-cells'
- ngpios
- clocks
- bus-frequency
@@ -72,6 +81,7 @@
reg = <0x1e780200 0x0100>;
clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
+ #interrupt-cells = <2>;
ngpios = <80>;
bus-frequency = <12000000>;
};
diff --git a/Bindings/gpio/atmel,at91rm9200-gpio.yaml b/Bindings/gpio/atmel,at91rm9200-gpio.yaml
new file mode 100644
index 0000000..3dd7093
--- /dev/null
+++ b/Bindings/gpio/atmel,at91rm9200-gpio.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/atmel,at91rm9200-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip GPIO controller (PIO)
+
+maintainers:
+ - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - atmel,at91sam9x5-gpio
+ - microchip,sam9x60-gpio
+ - const: atmel,at91rm9200-gpio
+ - items:
+ - enum:
+ - microchip,sam9x7-gpio
+ - const: microchip,sam9x60-gpio
+ - const: atmel,at91rm9200-gpio
+ - items:
+ - const: atmel,at91rm9200-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-controller: true
+ gpio-line-names: true
+
+ "#gpio-cells":
+ const: 2
+
+ clocks:
+ maxItems: 1
+
+ "#gpio-lines":
+ description:
+ Number of gpio, 32 by default if absent
+ maxItems: 1
+ default: 32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - gpio-controller
+ - "#gpio-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+...
diff --git a/Bindings/gpio/fsl,qoriq-gpio.yaml b/Bindings/gpio/fsl,qoriq-gpio.yaml
new file mode 100644
index 0000000..84fd822
--- /dev/null
+++ b/Bindings/gpio/fsl,qoriq-gpio.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,qoriq-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,mpc5121-gpio
+ - fsl,mpc5125-gpio
+ - fsl,mpc8349-gpio
+ - fsl,mpc8572-gpio
+ - fsl,mpc8610-gpio
+ - fsl,pq3-gpio
+ - items:
+ - enum:
+ - fsl,ls1021a-gpio
+ - fsl,ls1028a-gpio
+ - fsl,ls1043a-gpio
+ - fsl,ls1046a-gpio
+ - fsl,ls1088a-gpio
+ - fsl,ls2080a-gpio
+ - const: fsl,qoriq-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 32
+
+ little-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ GPIO registers are used as little endian. If not
+ present registers are used as big endian by default.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@1100 {
+ compatible = "fsl,mpc5125-gpio";
+ reg = <0x1100 0x080>;
+ interrupts = <78 0x8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio@2300000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x2300000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Bindings/gpio/fsl-imx-gpio.yaml b/Bindings/gpio/fsl-imx-gpio.yaml
index 918776d..e1fc8bb 100644
--- a/Bindings/gpio/fsl-imx-gpio.yaml
+++ b/Bindings/gpio/fsl-imx-gpio.yaml
@@ -7,7 +7,9 @@
title: Freescale i.MX/MXC GPIO controller
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Shawn Guo <shawnguo@kernel.org>
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Fabio Estevam <festevam@gmail.com>
properties:
compatible:
diff --git a/Bindings/gpio/gpio-mpc8xxx.txt b/Bindings/gpio/gpio-mpc8xxx.txt
deleted file mode 100644
index cd28e93..0000000
--- a/Bindings/gpio/gpio-mpc8xxx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
- The following <soc>s are known to be supported:
- mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
- ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-
-Optional properties:
-- little-endian : GPIO registers are used as little endian. If not
- present registers are used as big endian by default.
-
-Example of gpio-controller node for a mpc5125 SoC:
-
-gpio0: gpio@1100 {
- compatible = "fsl,mpc5125-gpio";
- #gpio-cells = <2>;
- reg = <0x1100 0x080>;
- interrupts = <78 0x8>;
-};
-
-Example of gpio-controller node for a ls2080a SoC:
-
-gpio0: gpio@2300000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <0 36 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-};
-
-
-Example of gpio-controller node for a ls1028a/ls1088a SoC:
-
-gpio1: gpio@2300000 {
- compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- little-endian;
-};
diff --git a/Bindings/gpio/gpio-mxs.yaml b/Bindings/gpio/gpio-mxs.yaml
index dfa1133..8ff5436 100644
--- a/Bindings/gpio/gpio-mxs.yaml
+++ b/Bindings/gpio/gpio-mxs.yaml
@@ -8,7 +8,6 @@
maintainers:
- Shawn Guo <shawnguo@kernel.org>
- - Anson Huang <Anson.Huang@nxp.com>
description: |
The Freescale MXS GPIO controller is part of MXS PIN controller.
diff --git a/Bindings/gpio/gpio-pca95xx.yaml b/Bindings/gpio/gpio-pca95xx.yaml
index 99febb8..51e8390 100644
--- a/Bindings/gpio/gpio-pca95xx.yaml
+++ b/Bindings/gpio/gpio-pca95xx.yaml
@@ -66,6 +66,7 @@
- ti,tca6408
- ti,tca6416
- ti,tca6424
+ - ti,tca9535
- ti,tca9538
- ti,tca9539
- ti,tca9554
diff --git a/Bindings/gpio/gpio-vf610.yaml b/Bindings/gpio/gpio-vf610.yaml
index a27f929..cabda2e 100644
--- a/Bindings/gpio/gpio-vf610.yaml
+++ b/Bindings/gpio/gpio-vf610.yaml
@@ -51,6 +51,10 @@
gpio-controller: true
+ gpio-line-names:
+ minItems: 1
+ maxItems: 32
+
clocks:
items:
- description: SoC GPIO clock
diff --git a/Bindings/gpio/gpio-zevio.txt b/Bindings/gpio/gpio-zevio.txt
deleted file mode 100644
index a37bd9a..0000000
--- a/Bindings/gpio/gpio-zevio.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Zevio GPIO controller
-
-Required properties:
-- compatible: Should be "lsi,zevio-gpio"
-- reg: Address and length of the register set for the device
-- #gpio-cells: Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-
-Example:
- gpio: gpio@90000000 {
- compatible = "lsi,zevio-gpio";
- reg = <0x90000000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
diff --git a/Bindings/gpio/gpio_atmel.txt b/Bindings/gpio/gpio_atmel.txt
deleted file mode 100644
index 29416f9..0000000
--- a/Bindings/gpio/gpio_atmel.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Atmel GPIO controller (PIO)
-
-Required properties:
-- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
-- reg: Should contain GPIO controller registers location and length
-- interrupts: Should be the port interrupt shared by all the pins.
-- #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify optional parameters to declare if the GPIO
- is active high or low. See gpio.txt.
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two. The first cell is the pin number and the
- second cell is used to specify irq type flags, see the two cell description
- in interrupt-controller/interrupts.txt for details.
-
-optional properties:
-- #gpio-lines: Number of gpio if absent 32.
-
-
-Example:
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4>;
- #gpio-cells = <2>;
- gpio-controller;
- #gpio-lines = <19>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
diff --git a/Bindings/gpio/lsi,zevio-gpio.yaml b/Bindings/gpio/lsi,zevio-gpio.yaml
new file mode 100644
index 0000000..e9e201a
--- /dev/null
+++ b/Bindings/gpio/lsi,zevio-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/lsi,zevio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zevio GPIO controller
+
+maintainers:
+ - Pratik Farkase <pratikfarkase94@gmail.com>
+
+properties:
+ compatible:
+ items:
+ - const: lsi,zevio-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+required:
+ - compatible
+ - reg
+ - "#gpio-cells"
+ - gpio-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ gpio@90000000 {
+ compatible = "lsi,zevio-gpio";
+ reg = <0x90000000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Bindings/gpu/arm,mali-bifrost.yaml b/Bindings/gpu/arm,mali-bifrost.yaml
index e796a1f..278399a 100644
--- a/Bindings/gpu/arm,mali-bifrost.yaml
+++ b/Bindings/gpu/arm,mali-bifrost.yaml
@@ -34,6 +34,7 @@
- const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
- items:
- enum:
+ - mediatek,mt8188-mali
- mediatek,mt8192-mali
- const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
@@ -195,7 +196,9 @@
properties:
compatible:
contains:
- const: mediatek,mt8183b-mali
+ enum:
+ - mediatek,mt8183b-mali
+ - mediatek,mt8188-mali
then:
properties:
power-domains:
diff --git a/Bindings/hwmon/g762.txt b/Bindings/hwmon/g762.txt
deleted file mode 100644
index 6d154c4..0000000
--- a/Bindings/hwmon/g762.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-GMT G762/G763 PWM Fan controller
-
-Required node properties:
-
- - "compatible": must be either "gmt,g762" or "gmt,g763"
- - "reg": I2C bus address of the device
- - "clocks": a fixed clock providing input clock frequency
- on CLK pin of the chip.
-
-Optional properties:
-
- - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3.
- The higher the more.
-
- - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty)
- and 1 (negative duty).
-
- - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2.
-
-If an optional property is not set in .dts file, then current value is kept
-unmodified (e.g. u-boot installed value).
-
-Additional information on operational parameters for the device is available
-in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
-at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
-
-Example g762 node:
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- g762_clk: fixedclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <8192>;
- }
- }
-
- g762: g762@3e {
- compatible = "gmt,g762";
- reg = <0x3e>;
- clocks = <&g762_clk>
- fan_gear_mode = <0>; /* chip default */
- fan_startv = <1>; /* chip default */
- pwm_polarity = <0>; /* chip default */
- };
diff --git a/Bindings/hwmon/gmt,g762.yaml b/Bindings/hwmon/gmt,g762.yaml
new file mode 100644
index 0000000..8e1bffd
--- /dev/null
+++ b/Bindings/hwmon/gmt,g762.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GMT G761/G762/G763 PWM Fan controller
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+ GMT G761/G762/G763 PWM Fan controller.
+
+ G761 supports an internal-clock hence the clocks property is optional.
+ If not defined, internal-clock will be used. (31KHz is the clock of
+ the internal crystal oscillator)
+
+ If an optional property is not set in DT, then current value is kept
+ unmodified (e.g. bootloader installed value).
+
+ Additional information on operational parameters for the device is available
+ in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
+ at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
+
+properties:
+ compatible:
+ enum:
+ - gmt,g761
+ - gmt,g762
+ - gmt,g763
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: a fixed clock providing input clock frequency on CLK
+ pin of the chip.
+ maxItems: 1
+
+ fan_startv:
+ description: Fan startup voltage step
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ pwm_polarity:
+ description: PWM polarity (positive or negative duty)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ fan_gear_mode:
+ description: FAN gear mode. Configure High speed fan setting factor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+required:
+ - compatible
+ - reg
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - gmt,g762
+ - gmt,g763
+then:
+ required:
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>;
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+
+ g761@1e {
+ compatible = "gmt,g761";
+ reg = <0x1e>;
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+ };
diff --git a/Bindings/hwmon/maxim,max6639.yaml b/Bindings/hwmon/maxim,max6639.yaml
new file mode 100644
index 0000000..4f5837a
--- /dev/null
+++ b/Bindings/hwmon/maxim,max6639.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max6639
+
+maintainers:
+ - Naresh Solanki <naresh.solanki@9elements.com>
+
+description: |
+ The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM
+ fan-speed controller. It monitors its own temperature and one external
+ diode-connected transistor or the temperatures of two external diode-connected
+ transistors, typically available in CPUs, FPGAs, or GPUs.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max6639
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ '#pwm-cells':
+ const: 3
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^fan@[0-1]$":
+ type: object
+ description:
+ Represents the two fans and their specific configuration.
+
+ $ref: fan-common.yaml#
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description:
+ The fan number.
+
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan1: fan-controller@10 {
+ compatible = "maxim,max6639";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <3>;
+
+ fan@0 {
+ reg = <0x0>;
+ pulses-per-revolution = <2>;
+ max-rpm = <4000>;
+ target-rpm = <1000>;
+ pwms = <&fan1 0 25000 0>;
+ };
+
+ fan@1 {
+ reg = <0x1>;
+ pulses-per-revolution = <2>;
+ max-rpm = <8000>;
+ pwms = <&fan1 1 25000 0>;
+ };
+ };
+ };
+...
diff --git a/Bindings/hwmon/ti,ina2xx.yaml b/Bindings/hwmon/ti,ina2xx.yaml
index df86c2c..6ae9617 100644
--- a/Bindings/hwmon/ti,ina2xx.yaml
+++ b/Bindings/hwmon/ti,ina2xx.yaml
@@ -66,6 +66,14 @@
description: phandle to the regulator that provides the VS supply typically
in range from 2.7 V to 5.5 V.
+ ti,alert-polarity-active-high:
+ description: Alert pin is asserted based on the value of Alert polarity Bit
+ of Mask/Enable register. Default value is Normal (0 which maps to
+ active-low open collector). The other value is Inverted
+ (1 which maps to active-high open collector). Specify this property to set
+ the alert polarity to active-high.
+ $ref: /schemas/types.yaml#/definitions/flag
+
required:
- compatible
- reg
@@ -88,5 +96,6 @@
label = "vdd_3v0";
shunt-resistor = <1000>;
vs-supply = <&vdd_3v0>;
+ ti,alert-polarity-active-high;
};
};
diff --git a/Bindings/hwmon/ti,tmp108.yaml b/Bindings/hwmon/ti,tmp108.yaml
index 8b5307c..0ad10d4 100644
--- a/Bindings/hwmon/ti,tmp108.yaml
+++ b/Bindings/hwmon/ti,tmp108.yaml
@@ -9,6 +9,14 @@
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
+description: |
+ The TMP108 is a digital-output temperature sensor with a
+ dynamically-programmable limit window, and under- and overtemperature
+ alert functions.
+
+ Datasheets:
+ https://www.ti.com/product/TMP108
+
properties:
compatible:
enum:
@@ -24,6 +32,9 @@
"#thermal-sensor-cells":
const: 0
+ vcc-supply:
+ description: phandle to the regulator that provides the V+ supply
+
required:
- compatible
- reg
@@ -45,6 +56,7 @@
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tmp_alrt>;
+ vcc-supply = <&supply>;
#thermal-sensor-cells = <0>;
};
};
diff --git a/Bindings/i2c/amlogic,meson6-i2c.yaml b/Bindings/i2c/amlogic,meson6-i2c.yaml
index 26bed55..c4cc8af 100644
--- a/Bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Bindings/i2c/amlogic,meson6-i2c.yaml
@@ -30,6 +30,9 @@
clocks:
minItems: 1
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Bindings/i2c/atmel,at91sam-i2c.yaml b/Bindings/i2c/atmel,at91sam-i2c.yaml
index b2d19cf..e61cdb5 100644
--- a/Bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Bindings/i2c/atmel,at91sam-i2c.yaml
@@ -26,6 +26,7 @@
- microchip,sam9x60-i2c
- items:
- enum:
+ - microchip,sama7d65-i2c
- microchip,sama7g5-i2c
- microchip,sam9x7-i2c
- const: microchip,sam9x60-i2c
@@ -36,12 +37,6 @@
interrupts:
maxItems: 1
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
clocks:
maxItems: 1
@@ -72,8 +67,6 @@
- compatible
- reg
- interrupts
- - "#address-cells"
- - "#size-cells"
- clocks
allOf:
@@ -86,6 +79,7 @@
- atmel,sama5d4-i2c
- atmel,sama5d2-i2c
- microchip,sam9x60-i2c
+ - microchip,sama7d65-i2c
- microchip,sama7g5-i2c
then:
properties:
diff --git a/Bindings/i2c/brcm,brcmstb-i2c.yaml b/Bindings/i2c/brcm,brcmstb-i2c.yaml
index 7070c04..ac9ddf2 100644
--- a/Bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/Bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -76,21 +76,21 @@
examples:
- |
- bsca: i2c@f0406200 {
- clock-frequency = <390000>;
- compatible = "brcm,brcmstb-i2c";
- interrupt-parent = <&irq0_intc>;
- reg = <0xf0406200 0x58>;
- interrupts = <0x18>;
- interrupt-names = "upg_bsca";
- };
+ bsca: i2c@f0406200 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0xf0406200 0x58>;
+ clock-frequency = <390000>;
+ interrupt-parent = <&irq0_intc>;
+ interrupts = <0x18>;
+ interrupt-names = "upg_bsca";
+ };
- |
- ddc0: i2c@7ef04500 {
- compatible = "brcm,bcm2711-hdmi-i2c";
- reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
- reg-names = "bsc", "auto-i2c";
- clock-frequency = <390000>;
- };
+ ddc0: i2c@7ef04500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <390000>;
+ };
...
diff --git a/Bindings/i2c/i2c-demux-pinctrl.yaml b/Bindings/i2c/i2c-demux-pinctrl.yaml
index b813f6d..1eaf00b 100644
--- a/Bindings/i2c/i2c-demux-pinctrl.yaml
+++ b/Bindings/i2c/i2c-demux-pinctrl.yaml
@@ -109,65 +109,65 @@
// Example for a bus to be demuxed. It contains various I2C clients for
// HDMI, so the bus is named "i2c-hdmi":
i2chdmi: i2c-mux3 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
- i2c-bus-name = "i2c-hdmi";
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
};
+ };
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
};
- };
+ };
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&cec_clock>;
- clock-names = "cec";
-
- avdd-supply = <&fixedregulator1v8>;
- dvdd-supply = <&fixedregulator1v8>;
- pvdd-supply = <&fixedregulator1v8>;
- dvdd-3v-supply = <&fixedregulator3v3>;
- bgvdd-supply = <&fixedregulator1v8>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
};
+ };
};
+ };
};
diff --git a/Bindings/i2c/i2c-fsi.txt b/Bindings/i2c/i2c-fsi.txt
deleted file mode 100644
index b1be2ce..0000000
--- a/Bindings/i2c/i2c-fsi.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device-tree bindings for FSI-attached I2C master and busses
------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,i2c-fsi";
- - reg = < address size >; : The FSI CFAM address and address
- space size.
- - #address-cells = <1>; : Number of address cells in child
- nodes.
- - #size-cells = <0>; : Number of size cells in child nodes.
- - child nodes : Nodes to describe busses off the I2C
- master.
-
-Child node required properties:
- - reg = < port number > : The port number on the I2C master.
-
-Child node optional properties:
- - child nodes : Nodes to describe devices on the I2C
- bus.
-
-Examples:
-
- i2c@1800 {
- compatible = "ibm,i2c-fsi";
- reg = < 0x1800 0x400 >;
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-bus@0 {
- reg = <0>;
- };
-
- i2c-bus@1 {
- reg = <1>;
-
- eeprom@50 {
- compatible = "vendor,dev-name";
- };
- };
- };
diff --git a/Bindings/i2c/i2c-imx-lpi2c.yaml b/Bindings/i2c/i2c-imx-lpi2c.yaml
index 54d500b..1dcb9c7 100644
--- a/Bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Bindings/i2c/i2c-imx-lpi2c.yaml
@@ -7,7 +7,9 @@
title: Freescale Low Power Inter IC (LPI2C) for i.MX
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Shawn Guo <shawnguo@kernel.org>
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Fabio Estevam <festevam@gmail.com>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Bindings/i2c/i2c-lpc2k.txt b/Bindings/i2c/i2c-lpc2k.txt
deleted file mode 100644
index 4101aa6..0000000
--- a/Bindings/i2c/i2c-lpc2k.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP I2C controller for LPC2xxx/178x/18xx/43xx
-
-Required properties:
- - compatible: must be "nxp,lpc1788-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
-
-Optional properties:
-- clock-frequency: the desired I2C bus clock frequency in Hz; in
- absence of this property the default value is used (100 kHz).
-
-Example:
-i2c0: i2c@400a1000 {
- compatible = "nxp,lpc1788-i2c";
- reg = <0x400a1000 0x1000>;
- interrupts = <18>;
- clocks = <&ccu1 CLK_APB1_I2C0>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
-
-&i2c0 {
- clock-frequency = <400000>;
-
- lm75@48 {
- compatible = "nxp,lm75";
- reg = <0x48>;
- };
-};
-
diff --git a/Bindings/i2c/i2c-mux-gpio.yaml b/Bindings/i2c/i2c-mux-gpio.yaml
index f34cc7a..4a93d1f 100644
--- a/Bindings/i2c/i2c-mux-gpio.yaml
+++ b/Bindings/i2c/i2c-mux-gpio.yaml
@@ -57,6 +57,9 @@
last value used.
$ref: /schemas/types.yaml#/definitions/uint32
+ settle-time-us:
+ description: Delay to wait before doing any transfer when a new bus gets selected.
+
allOf:
- $ref: i2c-mux.yaml
diff --git a/Bindings/i2c/ibm,i2c-fsi.yaml b/Bindings/i2c/ibm,i2c-fsi.yaml
new file mode 100644
index 0000000..40ea829
--- /dev/null
+++ b/Bindings/i2c/ibm,i2c-fsi.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached I2C controller
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ This I2C controller is an FSI CFAM engine, providing access to a number of
+ I2C busses. Therefore this node will always be a child of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,i2c-fsi
+
+ reg:
+ items:
+ - description: FSI slave address
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^i2c-bus@[0-9a-f]+$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-bus@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c-bus@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
diff --git a/Bindings/i2c/nvidia,tegra20-i2c.yaml b/Bindings/i2c/nvidia,tegra20-i2c.yaml
index 424a4fc..92fbc1a 100644
--- a/Bindings/i2c/nvidia,tegra20-i2c.yaml
+++ b/Bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -87,12 +87,6 @@
interrupts:
maxItems: 1
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
clocks:
minItems: 1
maxItems: 2
diff --git a/Bindings/i2c/nxp,lpc1788-i2c.yaml b/Bindings/i2c/nxp,lpc1788-i2c.yaml
new file mode 100644
index 0000000..9a1b95c
--- /dev/null
+++ b/Bindings/i2c/nxp,lpc1788-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,lpc1788-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+maintainers:
+ - Vladimir Zapolskiy <vz@mleia.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: nxp,lpc1788-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ description: the desired I2C bus clock frequency in Hz
+ default: 100000
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include "dt-bindings/clock/lpc18xx-ccu.h"
+
+ i2c@400a1000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400a1000 0x1000>;
+ interrupts = <18>;
+ clocks = <&ccu1 CLK_APB1_I2C0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Bindings/i2c/qcom,i2c-cci.yaml b/Bindings/i2c/qcom,i2c-cci.yaml
index daf4e71..c33ae7b 100644
--- a/Bindings/i2c/qcom,i2c-cci.yaml
+++ b/Bindings/i2c/qcom,i2c-cci.yaml
@@ -31,6 +31,8 @@
- qcom,sm6350-cci
- qcom,sm8250-cci
- qcom,sm8450-cci
+ - qcom,sm8550-cci
+ - qcom,sm8650-cci
- const: qcom,msm8996-cci # CCI v2
"#address-cells":
@@ -195,6 +197,24 @@
- const: cpas_ahb
- const: cci
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8550-cci
+ - qcom,sm8650-cci
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: cpas_ahb
+ - const: cci
+
additionalProperties: false
examples:
diff --git a/Bindings/i2c/renesas,iic-emev2.yaml b/Bindings/i2c/renesas,iic-emev2.yaml
index 17c1102..551cfa6 100644
--- a/Bindings/i2c/renesas,iic-emev2.yaml
+++ b/Bindings/i2c/renesas,iic-emev2.yaml
@@ -44,11 +44,11 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
iic0: i2c@e0070000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,iic-emev2";
- reg = <0xe0070000 0x28>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- clocks = <&iic0_sclk>;
- clock-names = "sclk";
+ compatible = "renesas,iic-emev2";
+ reg = <0xe0070000 0x28>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic0_sclk>;
+ clock-names = "sclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Bindings/i2c/renesas,rcar-i2c.yaml b/Bindings/i2c/renesas,rcar-i2c.yaml
index 51b220d..6cc60c3 100644
--- a/Bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Bindings/i2c/renesas,rcar-i2c.yaml
@@ -153,14 +153,14 @@
#include <dt-bindings/power/r8a7791-sysc.h>
i2c0: i2c@e6508000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
- reg = <0xe6508000 0x40>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- clocks = <&cpg CPG_MOD 931>;
- power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
- resets = <&cpg 931>;
- i2c-scl-internal-delay-ns = <6>;
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+ reg = <0xe6508000 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Bindings/i2c/renesas,riic.yaml b/Bindings/i2c/renesas,riic.yaml
index 91ecf17..7993fe4 100644
--- a/Bindings/i2c/renesas,riic.yaml
+++ b/Bindings/i2c/renesas,riic.yaml
@@ -97,21 +97,21 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c0: i2c@fcfee000 {
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
- "tmoi";
- clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
- clock-frequency = <100000>;
- power-domains = <&cpg_clocks>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+ "tmoi";
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Bindings/i2c/renesas,rmobile-iic.yaml b/Bindings/i2c/renesas,rmobile-iic.yaml
index 04e4ffd..ec5222a 100644
--- a/Bindings/i2c/renesas,rmobile-iic.yaml
+++ b/Bindings/i2c/renesas,rmobile-iic.yaml
@@ -134,16 +134,16 @@
#include <dt-bindings/power/r8a7790-sysc.h>
iic0: i2c@e6500000 {
- compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
- "renesas,rmobile-iic";
- reg = <0xe6500000 0x425>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 318>;
- clock-frequency = <400000>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 318>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0xe6500000 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-frequency = <400000>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
diff --git a/Bindings/i2c/samsung,s3c2410-i2c.yaml b/Bindings/i2c/samsung,s3c2410-i2c.yaml
index 1303502..bbc5684 100644
--- a/Bindings/i2c/samsung,s3c2410-i2c.yaml
+++ b/Bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -26,9 +26,6 @@
- samsung,exynos850-i2c
- const: samsung,s3c2440-i2c
- '#address-cells':
- const: 1
-
clocks:
maxItems: 1
@@ -73,9 +70,6 @@
$ref: /schemas/types.yaml#/definitions/phandle
description: Pandle to syscon used to control the system registers.
- '#size-cells':
- const: 0
-
required:
- compatible
- reg
diff --git a/Bindings/i2c/snps,designware-i2c.yaml b/Bindings/i2c/snps,designware-i2c.yaml
index d9293c5..60035a7 100644
--- a/Bindings/i2c/snps,designware-i2c.yaml
+++ b/Bindings/i2c/snps,designware-i2c.yaml
@@ -33,6 +33,10 @@
- const: snps,designware-i2c
- description: Baikal-T1 SoC System I2C controller
const: baikal,bt1-sys-i2c
+ - description: T-HEAD TH1520 SoCs I2C controller
+ items:
+ - const: thead,th1520-i2c
+ - const: snps,designware-i2c
reg:
minItems: 1
diff --git a/Bindings/i2c/st,stm32-i2c.yaml b/Bindings/i2c/st,stm32-i2c.yaml
index 8fd8be7..457bb07 100644
--- a/Bindings/i2c/st,stm32-i2c.yaml
+++ b/Bindings/i2c/st,stm32-i2c.yaml
@@ -145,31 +145,31 @@
#include <dt-bindings/mfd/stm32f7-rcc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
//Example 1 (with st,stm32f4-i2c compatible)
- i2c@40005400 {
- compatible = "st,stm32f4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005400 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc 277>;
- clocks = <&rcc 0 149>;
- };
+ i2c@40005400 {
+ compatible = "st,stm32f4-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc 277>;
+ clocks = <&rcc 0 149>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- |
#include <dt-bindings/mfd/stm32f7-rcc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
//Example 2 (with st,stm32f7-i2c compatible)
- i2c@40005800 {
- compatible = "st,stm32f7-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005800 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
- clocks = <&rcc 1 CLK_I2C1>;
- };
+ i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005800 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- |
#include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -178,16 +178,16 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
- i2c@40013000 {
- compatible = "st,stm32mp15-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40013000 0x400>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C2_K>;
- resets = <&rcc I2C2_R>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- st,syscfg-fmp = <&syscfg 0x4 0x2>;
- };
+ i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40013000 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Bindings/i2c/ti,omap4-i2c.yaml b/Bindings/i2c/ti,omap4-i2c.yaml
index 781108a..8c2e35f 100644
--- a/Bindings/i2c/ti,omap4-i2c.yaml
+++ b/Bindings/i2c/ti,omap4-i2c.yaml
@@ -37,16 +37,8 @@
clock-names:
const: fck
- clock-frequency: true
-
power-domains: true
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
ti,hwmods:
description:
Must be "i2c<n>", n being the instance number (1-based).
@@ -55,38 +47,34 @@
$ref: /schemas/types.yaml#/definitions/string
deprecated: true
-# subnode's properties
-patternProperties:
- "@[0-9a-f]+$":
- type: object
- description:
- Flash device uses the below defined properties in the subnode.
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
-if:
- properties:
- compatible:
- enum:
- - ti,omap2420-i2c
- - ti,omap2430-i2c
- - ti,omap3-i2c
- - ti,omap4-i2c
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,omap2420-i2c
+ - ti,omap2430-i2c
+ - ti,omap3-i2c
+ - ti,omap4-i2c
-then:
- properties:
- ti,hwmods:
- items:
- - pattern: "^i2c([1-9])$"
+ then:
+ properties:
+ ti,hwmods:
+ items:
+ - pattern: "^i2c([1-9])$"
-else:
- properties:
- ti,hwmods: false
+ else:
+ properties:
+ ti,hwmods: false
+
+unevaluatedProperties: false
examples:
- |
@@ -94,9 +82,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
main_i2c0: i2c@2000000 {
- compatible = "ti,j721e-i2c", "ti,omap4-i2c";
- reg = <0x2000000 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x2000000 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Bindings/i3c/i3c.yaml b/Bindings/i3c/i3c.yaml
index 113957e..e25fa72 100644
--- a/Bindings/i3c/i3c.yaml
+++ b/Bindings/i3c/i3c.yaml
@@ -91,6 +91,7 @@
- const: 0
- description: |
Shall encode the I3C LVR (Legacy Virtual Register):
+ See include/dt-bindings/i3c/i3c.h
bit[31:8]: unused/ignored
bit[7:5]: I2C device index. Possible values:
* 0: I2C device has a 50 ns spike filter
@@ -153,6 +154,8 @@
examples:
- |
+ #include <dt-bindings/i3c/i3c.h>
+
i3c@d040000 {
compatible = "cdns,i3c-master";
clocks = <&coreclock>, <&i3csysclock>;
@@ -166,7 +169,7 @@
/* I2C device. */
eeprom@57 {
compatible = "atmel,24c01";
- reg = <0x57 0x0 0x10>;
+ reg = <0x57 0x0 (I2C_FM | I2C_FILTER)>;
pagesize = <0x8>;
};
diff --git a/Bindings/i3c/snps,dw-i3c-master.yaml b/Bindings/i3c/snps,dw-i3c-master.yaml
index c0e805e..4fc13e3 100644
--- a/Bindings/i3c/snps,dw-i3c-master.yaml
+++ b/Bindings/i3c/snps,dw-i3c-master.yaml
@@ -20,7 +20,16 @@
maxItems: 1
clocks:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: Core clock
+ - description: APB clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: apb
interrupts:
maxItems: 1
diff --git a/Bindings/iio/adc/adc.yaml b/Bindings/iio/adc/adc.yaml
index 36775f8..8e7835c 100644
--- a/Bindings/iio/adc/adc.yaml
+++ b/Bindings/iio/adc/adc.yaml
@@ -38,6 +38,25 @@
The first value specifies the positive input pin, the second
specifies the negative input pin.
+ single-channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ When devices combine single-ended and differential channels, allow the
+ channel for a single element to be specified, independent of reg (as for
+ differential channels). If this and diff-channels are not present reg
+ shall be used instead.
+
+ common-mode-channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some ADCs have differential input pins that can be used to measure
+ single-ended or pseudo-differential inputs. This property can be used
+ in addition to single-channel to signal software that this channel is
+ not differential but still specify two inputs.
+
+ The input pair is specified by setting single-channel to the positive
+ input pin and common-mode-channel to the negative pin.
+
settling-time-us:
description:
Time between enabling the channel and first stable readings.
@@ -50,4 +69,15 @@
device design and can interact with other characteristics such as
settling time.
+anyOf:
+ - oneOf:
+ - required:
+ - reg
+ - diff-channels
+ - required:
+ - reg
+ - single-channel
+ - required:
+ - reg
+
additionalProperties: true
diff --git a/Bindings/iio/adc/adi,ad7173.yaml b/Bindings/iio/adc/adi,ad7173.yaml
index ea6cfcd..17c5d39 100644
--- a/Bindings/iio/adc/adi,ad7173.yaml
+++ b/Bindings/iio/adc/adi,ad7173.yaml
@@ -19,7 +19,18 @@
primarily for measurement of signals close to DC but also delivers
outstanding performance with input bandwidths out to ~10kHz.
+ Analog Devices AD411x ADC's:
+ The AD411X family encompasses a series of low power, low noise, 24-bit,
+ sigma-delta analog-to-digital converters that offer a versatile range of
+ specifications. They integrate an analog front end suitable for processing
+ fully differential/single-ended and bipolar voltage inputs.
+
Datasheets for supported chips:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
@@ -31,6 +42,11 @@
properties:
compatible:
enum:
+ - adi,ad4111
+ - adi,ad4112
+ - adi,ad4114
+ - adi,ad4115
+ - adi,ad4116
- adi,ad7172-2
- adi,ad7172-4
- adi,ad7173-8
@@ -129,10 +145,56 @@
maximum: 15
diff-channels:
+ description: |
+ This property is used for defining the inputs of a differential
+ voltage channel. The first value is the positive input and the second
+ value is the negative input of the channel.
+
+ Family AD411x supports a dedicated VINCOM voltage input.
+ To select it set the second channel to 16.
+ (VIN2, VINCOM) -> diff-channels = <2 16>
+
+ There are special values that can be selected besides the voltage
+ analog inputs:
+ 21: REF+
+ 22: REF−
+
+ Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2,
+ must be paired together and can be used to monitor the power supply
+ of the ADC:
+ 19: ((AVDD1 − AVSS)/5)+
+ 20: ((AVDD1 − AVSS)/5)−
+
items:
minimum: 0
maximum: 31
+ single-channel:
+ description: |
+ This property is used for defining a current channel or the positive
+ input of a voltage channel (single-ended or pseudo-differential).
+
+ Models AD4111 and AD4112 support current channels.
+ Example: (IIN2+, IIN2−) -> single-channel = <2>
+ To correctly configure a current channel set the "adi,current-channel"
+ property to true.
+
+ To configure a single-ended/pseudo-differential channel set the
+ "common-mode-channel" property to the desired negative voltage input.
+
+ When used as a voltage channel, special inputs are valid as well.
+ minimum: 0
+ maximum: 31
+
+ common-mode-channel:
+ description:
+ This property is used for defining the negative input of a
+ single-ended or pseudo-differential voltage channel.
+
+ Special inputs are valid as well.
+ minimum: 0
+ maximum: 31
+
adi,reference-select:
description: |
Select the reference source to use when converting on
@@ -154,9 +216,31 @@
- avdd
default: refout-avss
+ adi,current-channel:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Signal that the selected inputs are current channels.
+ Only available on AD4111 and AD4112.
+
required:
- reg
- - diff-channels
+
+ allOf:
+ - oneOf:
+ - required: [single-channel]
+ properties:
+ diff-channels: false
+ - required: [diff-channels]
+ properties:
+ single-channel: false
+ adi,current-channel: false
+ common-mode-channel: false
+
+ - if:
+ required: [common-mode-channel]
+ then:
+ properties:
+ adi,current-channel: false
required:
- compatible
@@ -166,7 +250,6 @@
- $ref: /schemas/spi/spi-peripheral-props.yaml#
# Only ad7172-4, ad7173-8 and ad7175-8 support vref2
- # Other models have [0-3] channel registers
- if:
properties:
compatible:
@@ -187,6 +270,37 @@
- vref
- refout-avss
- avdd
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad4114
+ - adi,ad4115
+ - adi,ad4116
+ - adi,ad7173-8
+ - adi,ad7175-8
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]$":
+ properties:
+ reg:
+ maximum: 15
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7172-2
+ - adi,ad7175-2
+ - adi,ad7176-2
+ - adi,ad7177-2
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]$":
+ properties:
reg:
maximum: 3
@@ -211,6 +325,34 @@
- adi,reference-select
- if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad4111
+ - adi,ad4112
+ - adi,ad4114
+ - adi,ad4115
+ - adi,ad4116
+ then:
+ properties:
+ avdd2-supply: false
+
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - adi,ad4111
+ - adi,ad4112
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]$":
+ properties:
+ adi,current-channel: false
+
+ - if:
anyOf:
- required: [clock-names]
- required: [clocks]
@@ -221,6 +363,7 @@
unevaluatedProperties: false
examples:
+ # Example AD7173-8 with external reference connected to REF+/REF-:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -277,3 +420,50 @@
};
};
};
+
+ # Example AD4111 with current channel and single-ended channel:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad4111";
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "rdy";
+ interrupt-parent = <&gpio>;
+ spi-max-frequency = <5000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ bipolar;
+ diff-channels = <4 5>;
+ };
+
+ // Single ended channel VIN2/VINCOM
+ channel@1 {
+ reg = <1>;
+ bipolar;
+ single-channel = <2>;
+ common-mode-channel = <16>;
+ };
+
+ // Current channel IN2+/IN2-
+ channel@2 {
+ reg = <2>;
+ single-channel = <2>;
+ adi,current-channel;
+ };
+ };
+ };
diff --git a/Bindings/iio/adc/adi,ad7192.yaml b/Bindings/iio/adc/adi,ad7192.yaml
index 16def29..190889c 100644
--- a/Bindings/iio/adc/adi,ad7192.yaml
+++ b/Bindings/iio/adc/adi,ad7192.yaml
@@ -21,8 +21,15 @@
- adi,ad7190
- adi,ad7192
- adi,ad7193
+ - adi,ad7194
- adi,ad7195
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
reg:
maxItems: 1
@@ -41,6 +48,11 @@
interrupts:
maxItems: 1
+ aincom-supply:
+ description: |
+ AINCOM voltage supply. Analog inputs AINx are referenced to this input
+ when configured for pseudo-differential operation.
+
dvdd-supply:
description: DVdd voltage supply
@@ -84,6 +96,41 @@
description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
type: boolean
+patternProperties:
+ "^channel@[0-9a-f]+$":
+ type: object
+ $ref: adc.yaml
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: The channel index.
+ minimum: 0
+ maximum: 271
+
+ diff-channels:
+ description:
+ Both inputs can be connected to pins AIN1 to AIN16 by choosing the
+ appropriate value from 1 to 16.
+ items:
+ minimum: 1
+ maximum: 16
+
+ single-channel:
+ description:
+ Positive input can be connected to pins AIN1 to AIN16 by choosing the
+ appropriate value from 1 to 16. Negative input is connected to AINCOM.
+ minimum: 1
+ maximum: 16
+
+ oneOf:
+ - required:
+ - reg
+ - diff-channels
+ - required:
+ - reg
+ - single-channel
+
required:
- compatible
- reg
@@ -98,6 +145,17 @@
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - adi,ad7190
+ - adi,ad7192
+ - adi,ad7193
+ - adi,ad7195
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]+$": false
unevaluatedProperties: false
@@ -117,6 +175,7 @@
clock-names = "mclk";
interrupts = <25 0x2>;
interrupt-parent = <&gpio>;
+ aincom-supply = <&aincom>;
dvdd-supply = <&dvdd>;
avdd-supply = <&avdd>;
vref-supply = <&vref>;
@@ -127,3 +186,38 @@
adi,burnout-currents-enable;
};
};
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7194";
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ spi-cpha;
+ clocks = <&ad7192_mclk>;
+ clock-names = "mclk";
+ interrupts = <25 0x2>;
+ interrupt-parent = <&gpio>;
+ aincom-supply = <&aincom>;
+ dvdd-supply = <&dvdd>;
+ avdd-supply = <&avdd>;
+ vref-supply = <&vref>;
+
+ channel@0 {
+ reg = <0>;
+ diff-channels = <1 6>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ single-channel = <1>;
+ };
+ };
+ };
diff --git a/Bindings/iio/adc/adi,ad7380.yaml b/Bindings/iio/adc/adi,ad7380.yaml
new file mode 100644
index 0000000..899b777
--- /dev/null
+++ b/Bindings/iio/adc/adi,ad7380.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Simultaneous Sampling Analog to Digital Converters
+
+maintainers:
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+ * https://www.analog.com/en/products/ad7380.html
+ * https://www.analog.com/en/products/ad7381.html
+ * https://www.analog.com/en/products/ad7383.html
+ * https://www.analog.com/en/products/ad7384.html
+ * https://www.analog.com/en/products/ad7380-4.html
+ * https://www.analog.com/en/products/ad7381-4.html
+ * https://www.analog.com/en/products/ad7383-4.html
+ * https://www.analog.com/en/products/ad7384-4.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7380
+ - adi,ad7381
+ - adi,ad7383
+ - adi,ad7384
+ - adi,ad7380-4
+ - adi,ad7381-4
+ - adi,ad7383-4
+ - adi,ad7384-4
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 80000000
+ spi-cpol: true
+ spi-cpha: true
+
+ vcc-supply:
+ description: A 3V to 3.6V supply that powers the chip.
+
+ vlogic-supply:
+ description:
+ A 1.65V to 3.6V supply for the logic pins.
+
+ refio-supply:
+ description:
+ A 2.5V to 3.3V supply for the external reference voltage. When omitted,
+ the internal 2.5V reference is used.
+
+ aina-supply:
+ description:
+ The common mode voltage supply for the AINA- pin on pseudo-differential
+ chips.
+
+ ainb-supply:
+ description:
+ The common mode voltage supply for the AINB- pin on pseudo-differential
+ chips.
+
+ ainc-supply:
+ description:
+ The common mode voltage supply for the AINC- pin on pseudo-differential
+ chips.
+
+ aind-supply:
+ description:
+ The common mode voltage supply for the AIND- pin on pseudo-differential
+ chips.
+
+ interrupts:
+ description:
+ When the device is using 1-wire mode, this property is used to optionally
+ specify the ALERT interrupt.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+ - vlogic-supply
+
+unevaluatedProperties: false
+
+allOf:
+ # pseudo-differential chips require common mode voltage supplies,
+ # true differential chips don't use them
+ - if:
+ properties:
+ compatible:
+ enum:
+ - adi,ad7383
+ - adi,ad7384
+ - adi,ad7383-4
+ - adi,ad7384-4
+ then:
+ required:
+ - aina-supply
+ - ainb-supply
+ else:
+ properties:
+ aina-supply: false
+ ainb-supply: false
+ - if:
+ properties:
+ compatible:
+ enum:
+ - adi,ad7383-4
+ - adi,ad7384-4
+ then:
+ required:
+ - ainc-supply
+ - aind-supply
+ else:
+ properties:
+ ainc-supply: false
+ aind-supply: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7380";
+ reg = <0>;
+
+ spi-cpol;
+ spi-cpha;
+ spi-max-frequency = <80000000>;
+
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio0>;
+
+ vcc-supply = <&supply_3_3V>;
+ vlogic-supply = <&supply_3_3V>;
+ refio-supply = <&supply_2_5V>;
+ };
+ };
diff --git a/Bindings/iio/adc/adi,ad7606.yaml b/Bindings/iio/adc/adi,ad7606.yaml
index 7fa46df..00fdaed 100644
--- a/Bindings/iio/adc/adi,ad7606.yaml
+++ b/Bindings/iio/adc/adi,ad7606.yaml
@@ -11,6 +11,7 @@
description: |
Analog Devices AD7606 Simultaneous Sampling ADC
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
@@ -19,9 +20,9 @@
compatible:
enum:
- adi,ad7605-4
- - adi,ad7606-8
- - adi,ad7606-6
- adi,ad7606-4
+ - adi,ad7606-6
+ - adi,ad7606-8 # Referred to as AD7606 (without -8) in the datasheet
- adi,ad7606b
- adi,ad7616
diff --git a/Bindings/iio/adc/amlogic,meson-saradc.yaml b/Bindings/iio/adc/amlogic,meson-saradc.yaml
index 7e8328e..f748f3a 100644
--- a/Bindings/iio/adc/amlogic,meson-saradc.yaml
+++ b/Bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -66,6 +66,9 @@
nvmem-cell-names:
const: temperature_calib
+ power-domains:
+ maxItems: 1
+
allOf:
- if:
properties:
diff --git a/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml b/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml
new file mode 100644
index 0000000..6497c41
--- /dev/null
+++ b/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6359-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6350 series PMIC AUXADC
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+ The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+ in some MediaTek PMICs, performing various PMIC related measurements
+ such as battery and PMIC internal voltage regulators temperatures,
+ accessory detection resistance (usually, for a 3.5mm audio jack)
+ other than voltages for various PMIC internal components.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6357-auxadc
+ - mediatek,mt6358-auxadc
+ - mediatek,mt6359-auxadc
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - "#io-channel-cells"
+
+additionalProperties: false
diff --git a/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index c1b1324..2722eda 100644
--- a/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -246,6 +246,10 @@
From common IIO binding. Used to pipe external sigma delta
modulator or internal ADC output to DFSDM channel.
+ port:
+ $ref: /schemas/sound/audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- "#sound-dai-cells"
diff --git a/Bindings/iio/adc/ti,ads1015.yaml b/Bindings/iio/adc/ti,ads1015.yaml
index d605999..718f633 100644
--- a/Bindings/iio/adc/ti,ads1015.yaml
+++ b/Bindings/iio/adc/ti,ads1015.yaml
@@ -18,6 +18,7 @@
enum:
- ti,ads1015
- ti,ads1115
+ - ti,tla2021
- ti,tla2024
reg:
diff --git a/Bindings/iio/adc/ti,ads1119.yaml b/Bindings/iio/adc/ti,ads1119.yaml
new file mode 100644
index 0000000..ba6850a
--- /dev/null
+++ b/Bindings/iio/adc/ti,ads1119.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1119.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS1119 ADC
+
+maintainers:
+ - João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
+
+description:
+ The TI ADS1119 is a precision 16-bit ADC over I2C that offers single-ended and
+ differential measurements using a multiplexed input. It features a programmable
+ gain, a programmable sample rate, an internal oscillator and voltage reference,
+ and a 50/60Hz rejection filter.
+
+properties:
+ compatible:
+ const: ti,ads1119
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ avdd-supply: true
+ dvdd-supply: true
+
+ vref-supply:
+ description:
+ ADC external reference voltage (VREF).
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - avdd-supply
+ - dvdd-supply
+
+patternProperties:
+ "^channel@([0-6])$":
+ $ref: adc.yaml
+ type: object
+ properties:
+ reg:
+ minimum: 0
+ maximum: 6
+
+ diff-channels:
+ description:
+ Differential input channels AIN0-AIN1, AIN2-AIN3 and AIN1-AIN2.
+ oneOf:
+ - items:
+ - const: 0
+ - const: 1
+ - items:
+ - const: 2
+ - const: 3
+ - items:
+ - const: 1
+ - const: 2
+
+ single-channel:
+ description:
+ Single-ended input channels AIN0, AIN1, AIN2 and AIN3.
+ minimum: 0
+ maximum: 3
+
+ oneOf:
+ - required:
+ - diff-channels
+ - required:
+ - single-channel
+
+ required:
+ - reg
+
+ unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@40 {
+ compatible = "ti,ads1119";
+ reg = <0x40>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ avdd-supply = <®_avdd_ads1119>;
+ dvdd-supply = <®_dvdd_ads1119>;
+ vref-supply = <®_vref_ads1119>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ channel@0 {
+ reg = <0>;
+ single-channel = <0>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ diff-channels = <0 1>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ single-channel = <3>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ single-channel = <1>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ single-channel = <2>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ diff-channels = <1 2>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ diff-channels = <2 3>;
+ };
+ };
+ };
diff --git a/Bindings/iio/chemical/sciosense,ens160.yaml b/Bindings/iio/chemical/sciosense,ens160.yaml
new file mode 100644
index 0000000..267033a
--- /dev/null
+++ b/Bindings/iio/chemical/sciosense,ens160.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sciosense,ens160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ScioSense ENS160 multi-gas sensor
+
+maintainers:
+ - Gustavo Silva <gustavograzs@gmail.com>
+
+description: |
+ Digital Multi-Gas Sensor for Monitoring Indoor Air Quality.
+
+ Datasheet:
+ https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf
+
+properties:
+ compatible:
+ enum:
+ - sciosense,ens160
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+ vddio-supply: true
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gas-sensor@52 {
+ compatible = "sciosense,ens160";
+ reg = <0x52>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gas-sensor@0 {
+ compatible = "sciosense,ens160";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
+...
diff --git a/Bindings/iio/dac/adi,ad3552r.yaml b/Bindings/iio/dac/adi,ad3552r.yaml
index 8265d70..fc8b97f 100644
--- a/Bindings/iio/dac/adi,ad3552r.yaml
+++ b/Bindings/iio/dac/adi,ad3552r.yaml
@@ -13,13 +13,17 @@
description: |
Bindings for the Analog Devices AD3552R DAC device and similar.
Datasheet can be found here:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad3541r.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad3551r.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
properties:
compatible:
enum:
+ - adi,ad3541r
- adi,ad3542r
+ - adi,ad3551r
- adi,ad3552r
reg:
@@ -92,13 +96,13 @@
maximum: 511
minimum: -511
- adi,gain-scaling-p-inv-log2:
- description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+ adi,gain-scaling-p:
+ description: GainP = 1 / ( 2 ^ adi,gain-scaling-p)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
- adi,gain-scaling-n-inv-log2:
- description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+ adi,gain-scaling-n:
+ description: GainN = 1 / ( 2 ^ adi,gain-scaling-n)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
@@ -107,8 +111,8 @@
required:
- adi,gain-offset
- - adi,gain-scaling-p-inv-log2
- - adi,gain-scaling-n-inv-log2
+ - adi,gain-scaling-p
+ - adi,gain-scaling-n
- adi,rfb-ohms
required:
@@ -128,7 +132,9 @@
properties:
compatible:
contains:
- const: adi,ad3542r
+ enum:
+ - adi,ad3541r
+ - adi,ad3542r
then:
patternProperties:
"^channel@([0-1])$":
@@ -158,7 +164,9 @@
properties:
compatible:
contains:
- const: adi,ad3552r
+ enum:
+ - adi,ad3551r
+ - adi,ad3552r
then:
patternProperties:
"^channel@([0-1])$":
@@ -182,6 +190,21 @@
- const: -10000000
- const: 10000000
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad3541r
+ - adi,ad3551r
+ then:
+ properties:
+ channel@1: false
+ channel@0:
+ properties:
+ reg:
+ const: 0
+
required:
- compatible
- reg
@@ -208,8 +231,8 @@
reg = <1>;
custom-output-range-config {
adi,gain-offset = <5>;
- adi,gain-scaling-p-inv-log2 = <1>;
- adi,gain-scaling-n-inv-log2 = <2>;
+ adi,gain-scaling-p = <1>;
+ adi,gain-scaling-n = <2>;
adi,rfb-ohms = <1>;
};
};
diff --git a/Bindings/iio/frequency/adi,adf4350.yaml b/Bindings/iio/frequency/adi,adf4350.yaml
index 43cbf27..d1d1311 100644
--- a/Bindings/iio/frequency/adi,adf4350.yaml
+++ b/Bindings/iio/frequency/adi,adf4350.yaml
@@ -28,6 +28,12 @@
clock-names:
const: clkin
+ '#clock-cells':
+ const: 0
+
+ clock-output-names:
+ maxItems: 1
+
gpios:
maxItems: 1
description: Lock detect GPIO.
diff --git a/Bindings/iio/imu/adi,adis16475.yaml b/Bindings/iio/imu/adi,adis16475.yaml
index 9b7ad60..9d185f7 100644
--- a/Bindings/iio/imu/adi,adis16475.yaml
+++ b/Bindings/iio/imu/adi,adis16475.yaml
@@ -30,12 +30,19 @@
- adi,adis16467-2
- adi,adis16467-3
- adi,adis16500
+ - adi,adis16501
- adi,adis16505-1
- adi,adis16505-2
- adi,adis16505-3
- adi,adis16507-1
- adi,adis16507-2
- adi,adis16507-3
+ - adi,adis16575-2
+ - adi,adis16575-3
+ - adi,adis16576-2
+ - adi,adis16576-3
+ - adi,adis16577-2
+ - adi,adis16577-3
reg:
maxItems: 1
@@ -90,12 +97,19 @@
contains:
enum:
- adi,adis16500
+ - adi,adis16501
- adi,adis16505-1
- adi,adis16505-2
- adi,adis16505-3
- adi,adis16507-1
- adi,adis16507-2
- adi,adis16507-3
+ - adi,adis16575-2
+ - adi,adis16575-3
+ - adi,adis16576-2
+ - adi,adis16576-3
+ - adi,adis16577-2
+ - adi,adis16577-3
then:
properties:
@@ -112,6 +126,23 @@
dependencies:
adi,sync-mode: [ clocks ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adis16575-2
+ - adi,adis16575-3
+ - adi,adis16576-2
+ - adi,adis16576-3
+ - adi,adis16577-2
+ - adi,adis16577-3
+
+ then:
+ properties:
+ spi-max-frequency:
+ maximum: 15000000
+
unevaluatedProperties: false
examples:
diff --git a/Bindings/iio/imu/adi,adis16480.yaml b/Bindings/iio/imu/adi,adis16480.yaml
index 56e0dc2..e3eec38 100644
--- a/Bindings/iio/imu/adi,adis16480.yaml
+++ b/Bindings/iio/imu/adi,adis16480.yaml
@@ -23,6 +23,12 @@
- adi,adis16497-1
- adi,adis16497-2
- adi,adis16497-3
+ - adi,adis16545-1
+ - adi,adis16545-2
+ - adi,adis16545-3
+ - adi,adis16547-1
+ - adi,adis16547-2
+ - adi,adis16547-3
reg:
maxItems: 1
diff --git a/Bindings/iio/imu/bosch,bmi160.yaml b/Bindings/iio/imu/bosch,bmi160.yaml
index 47cfba9..3b0a2d8 100644
--- a/Bindings/iio/imu/bosch,bmi160.yaml
+++ b/Bindings/iio/imu/bosch,bmi160.yaml
@@ -16,7 +16,11 @@
properties:
compatible:
- const: bosch,bmi160
+ oneOf:
+ - const: bosch,bmi160
+ - items:
+ - const: bosch,bmi120
+ - const: bosch,bmi160
reg:
maxItems: 1
diff --git a/Bindings/iio/light/vishay,veml6075.yaml b/Bindings/iio/light/vishay,veml6075.yaml
index 91c3187..ecf2339 100644
--- a/Bindings/iio/light/vishay,veml6075.yaml
+++ b/Bindings/iio/light/vishay,veml6075.yaml
@@ -4,14 +4,19 @@
$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Vishay VEML6075 UVA and UVB sensor
+title: Vishay VEML6075 UVA/B and VEML6040 RGBW sensors
maintainers:
- Javier Carrasco <javier.carrasco.cruz@gmail.com>
+description:
+ VEML6040 datasheet at https://www.vishay.com/docs/84276/veml6040.pdf
+
properties:
compatible:
- const: vishay,veml6075
+ enum:
+ - vishay,veml6040
+ - vishay,veml6075
reg:
maxItems: 1
diff --git a/Bindings/iio/magnetometer/fsl,mag3110.yaml b/Bindings/iio/magnetometer/fsl,mag3110.yaml
index 6b54d32..fbe8c2e 100644
--- a/Bindings/iio/magnetometer/fsl,mag3110.yaml
+++ b/Bindings/iio/magnetometer/fsl,mag3110.yaml
@@ -7,7 +7,7 @@
title: Freescale MAG3110 magnetometer sensor
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Jonathan Cameron <jic23@kernel.org>
properties:
compatible:
diff --git a/Bindings/iio/st,st-sensors.yaml b/Bindings/iio/st,st-sensors.yaml
index fff7e3d..71c1ee3 100644
--- a/Bindings/iio/st,st-sensors.yaml
+++ b/Bindings/iio/st,st-sensors.yaml
@@ -26,6 +26,7 @@
- st,lis2dw12
- st,lis2hh12
- st,lis2dh12-accel
+ - st,lis2ds12
- st,lis302dl
- st,lis331dl-accel
- st,lis331dlh-accel
diff --git a/Bindings/incomplete-devices.yaml b/Bindings/incomplete-devices.yaml
new file mode 100644
index 0000000..cfc1d39
--- /dev/null
+++ b/Bindings/incomplete-devices.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/incomplete-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rejected, Legacy or Incomplete Devices
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description:
+ Some devices will not or should not get a proper Devicetree bindings, but
+ their compatibles are present in Linux drivers for various reasons.
+
+ Examples are devices using ACPI PRP0001 with non-updatable firmware/ACPI
+ tables or old PowerPC platforms without in-tree DTS.
+
+ Following list of devices is an incomplete schema with a goal to pass DT schema
+ checks on undocumented compatibles but also reject any DTS file using such
+ un-approved compatible.
+
+ Usage of any of following compatibles is not allowed in Devicetree sources,
+ even if they come from immutable firmware.
+
+properties:
+ compatible:
+ oneOf:
+ - description:
+ Rejected compatibles in Devicetree, but used in ACPI-based devices
+ with non-updatable firmware/ACPI tables (via ACPI PRP0001)
+ enum:
+ - broadcom,bcm5241
+ - ltr,ltrf216a
+
+ - description: Legacy compatibles used on Macintosh devices
+ enum:
+ - adm1030
+ - bmac+
+ - heathrow-media-bay
+ - keylargo-media-bay
+ - lm87cimt
+ - MAC,adm1030
+ - MAC,ds1775
+ - max6690
+ - ohare-media-bay
+ - ohare-swim3
+ - smu-sat
+ - swim3
+
+ - description: Legacy compatibles used on other PowerPC devices
+ enum:
+ - 1682m-rng
+ - IBM,lhca
+ - IBM,lhea
+ - IBM,lhea-ethernet
+ - mpc5200b-fec-phy
+ - mpc5200-serial
+ - mpc5200-sram
+ - ohci-be
+ - ohci-bigendian
+ - ohci-le
+
+ - description: Legacy compatibles used on SPARC devices
+ enum:
+ - bq4802
+ - ds1287
+ - isa-m5819p
+ - isa-m5823p
+ - m5819
+ - sab82532
+ - SUNW,bbc-beep
+ - SUNW,bbc-i2c
+ - SUNW,CS4231
+ - SUNW,ebus-pic16f747-env
+ - SUNW,kt-cwq
+ - SUNW,kt-mau
+ - SUNW,n2-cwq
+ - SUNW,n2-mau
+ - SUNW,niusl
+ - SUNW,smbus-beep
+ - SUNW,sun4v-console
+ - SUNW,sun4v-pci
+ - SUNW,vf-cwq
+ - SUNW,vf-mau
+
+ - description: Incomplete and/or legacy compatibles for unknown devices
+ enum:
+ - electra-cf
+ - i2cpcf,8584
+ - virtio,uml
+
+ - description: Linux kernel unit tests and sample code
+ enum:
+ - audio-graph-card2-custom-sample
+ - compat1
+ - compat2
+ - compat3
+ - linux,spi-loopback-test
+ - mailbox-test
+ - regulator-virtual-consumer
+
+ - description:
+ Devices on MIPS platform, without any DTS users. These are
+ unlikely to get converted to DT schema.
+ enum:
+ - mti,ranchu
+
+ - description:
+ Devices on PowerPC platform, without any DTS users. These are
+ unlikely to get converted to DT schema.
+ enum:
+ - fujitsu,coral
+ - fujitsu,lime
+ - fujitsu,MB86276
+ - fujitsu,MB86277
+ - fujitsu,MB86293
+ - fujitsu,MB86294
+ - fujitsu,mint
+ - ibm,axon-msic
+ - ibm,pmemory
+ - ibm,pmemory-v2
+ - ibm,power-rng
+ - ibm,ppc4xx-spi
+ - ibm,sdram-4xx-ddr2
+ - ibm,secureboot
+ - ibm,secureboot-v1
+ - ibm,secureboot-v2
+ - ibm,secvar-backend
+ - sgy,gpio-halt
+ - wrs,epld-localbus
+
+required:
+ - compatible
+ - broken-usage-of-incorrect-compatible
+
+additionalProperties: false
diff --git a/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index c384bf0..6bdb804 100644
--- a/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -22,7 +22,9 @@
- const: allwinner,sun8i-a83t-r-lradc
- const: allwinner,sun50i-r329-lradc
- items:
- - const: allwinner,sun20i-d1-lradc
+ - enum:
+ - allwinner,sun50i-h616-lradc
+ - allwinner,sun20i-d1-lradc
- const: allwinner,sun50i-r329-lradc
reg:
diff --git a/Bindings/input/cirrus,cs40l50.yaml b/Bindings/input/cirrus,cs40l50.yaml
new file mode 100644
index 0000000..89bd068
--- /dev/null
+++ b/Bindings/input/cirrus,cs40l50.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,cs40l50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS40L50 Advanced Haptic Driver
+
+maintainers:
+ - James Ogletree <jogletre@opensource.cirrus.com>
+
+description:
+ CS40L50 is a haptic driver with waveform memory,
+ integrated DSP, and closed-loop algorithms.
+
+properties:
+ compatible:
+ enum:
+ - cirrus,cs40l50
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-a-supply:
+ description: Power supply for internal analog circuits.
+
+ vdd-p-supply:
+ description: Power supply for always-on circuits.
+
+ vdd-io-supply:
+ description: Power supply for digital input/output.
+
+ vdd-b-supply:
+ description: Power supply for the boost converter.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - vdd-io-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptic-driver@34 {
+ compatible = "cirrus,cs40l50";
+ reg = <0x34>;
+ interrupt-parent = <&gpio>;
+ interrupts = <113 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio 112 GPIO_ACTIVE_LOW>;
+ vdd-io-supply = <&vreg>;
+ };
+ };
diff --git a/Bindings/input/ti,nspire-keypad.txt b/Bindings/input/ti,nspire-keypad.txt
deleted file mode 100644
index 513d94d..0000000
--- a/Bindings/input/ti,nspire-keypad.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-TI-NSPIRE Keypad
-
-Required properties:
-- compatible: Compatible property value should be "ti,nspire-keypad".
-
-- reg: Physical base address of the peripheral and length of memory mapped
- region.
-
-- interrupts: The interrupt number for the peripheral.
-
-- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
- maximum and minimum delay time is ~2000us and ~500us respectively
-
-- row-delay: How long to wait before scanning each row.
-
-- clocks: The clock this peripheral is attached to.
-
-- linux,keymap: The keymap to use
- (see Documentation/devicetree/bindings/input/matrix-keymap.txt)
-
-Optional properties:
-- active-low: Specify that the keypad is active low (i.e. logical low signifies
- a key press).
-
-Example:
-
-input {
- compatible = "ti,nspire-keypad";
- reg = <0x900E0000 0x1000>;
- interrupts = <16>;
-
- scan-interval = <1000>;
- row-delay = <200>;
-
- clocks = <&apb_pclk>;
-
- linux,keymap = <
- 0x0000001c 0x0001001c 0x00040039
- 0x0005002c 0x00060015 0x0007000b
- 0x0008000f 0x0100002d 0x01010011
- 0x0102002f 0x01030004 0x01040016
- 0x01050014 0x0106001f 0x01070002
- 0x010a006a 0x02000013 0x02010010
- 0x02020019 0x02030007 0x02040018
- 0x02050031 0x02060032 0x02070005
- 0x02080028 0x0209006c 0x03000026
- 0x03010025 0x03020024 0x0303000a
- 0x03040017 0x03050023 0x03060022
- 0x03070008 0x03080035 0x03090069
- 0x04000021 0x04010012 0x04020020
- 0x0404002e 0x04050030 0x0406001e
- 0x0407000d 0x04080037 0x04090067
- 0x05010038 0x0502000c 0x0503001b
- 0x05040034 0x0505001a 0x05060006
- 0x05080027 0x0509000e 0x050a006f
- 0x0600002b 0x0602004e 0x06030068
- 0x06040003 0x0605006d 0x06060009
- 0x06070001 0x0609000f 0x0708002a
- 0x0709001d 0x070a0033 >;
-};
diff --git a/Bindings/input/ti,nspire-keypad.yaml b/Bindings/input/ti,nspire-keypad.yaml
new file mode 100644
index 0000000..ed3cfff
--- /dev/null
+++ b/Bindings/input/ti,nspire-keypad.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,nspire-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Keypad
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+allOf:
+ - $ref: input.yaml#
+ - $ref: matrix-keymap.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,nspire-keypad
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ scan-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: How often to scan in us. Based on a APB speed of 33MHz, the
+ maximum and minimum delay time is ~2000us and ~500us respectively
+
+ row-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: How long to wait between scanning each row in us.
+
+ active-low:
+ description: Specify that the keypad is active low.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - scan-interval
+ - row-delay
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ keypad@900e0000 {
+ compatible = "ti,nspire-keypad";
+ reg = <0x900e0000 0x1000>;
+ interrupts = <16>;
+
+ clocks = <&apb_pclk>;
+
+ scan-interval = <1000>;
+ row-delay = <200>;
+
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_ENTER)
+ MATRIX_KEY(0, 1, KEY_ENTER)
+ MATRIX_KEY(0, 4, KEY_SPACE)
+ MATRIX_KEY(0, 5, KEY_Z)
+ MATRIX_KEY(0, 6, KEY_Y)
+ MATRIX_KEY(0, 7, KEY_0)
+ >;
+ };
diff --git a/Bindings/input/touchscreen/ads7846.txt b/Bindings/input/touchscreen/ads7846.txt
index 81f6bda..399c877 100644
--- a/Bindings/input/touchscreen/ads7846.txt
+++ b/Bindings/input/touchscreen/ads7846.txt
@@ -57,6 +57,7 @@
pendown-gpio (u32).
pendown-gpio GPIO handle describing the pin the !PENIRQ
line is connected to.
+ ti,hsync-gpios GPIO line to poll for hsync
wakeup-source use any event on touchscreen as wakeup event.
(Legacy property support: "linux,wakeup")
touchscreen-size-x General touchscreen binding, see [1].
diff --git a/Bindings/input/touchscreen/edt-ft5x06.yaml b/Bindings/input/touchscreen/edt-ft5x06.yaml
index 745e57c..3797210 100644
--- a/Bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Bindings/input/touchscreen/edt-ft5x06.yaml
@@ -39,6 +39,7 @@
- edt,edt-ft5406
- edt,edt-ft5506
- evervision,ev-ft5726
+ - focaltech,ft5426
- focaltech,ft5452
- focaltech,ft6236
- focaltech,ft8719
diff --git a/Bindings/input/touchscreen/eeti,exc3000.yaml b/Bindings/input/touchscreen/eeti,exc3000.yaml
index 9dc25d3..1c7ae05 100644
--- a/Bindings/input/touchscreen/eeti,exc3000.yaml
+++ b/Bindings/input/touchscreen/eeti,exc3000.yaml
@@ -14,10 +14,14 @@
properties:
compatible:
- enum:
- - eeti,exc3000
- - eeti,exc80h60
- - eeti,exc80h84
+ oneOf:
+ - const: eeti,exc3000
+ - const: eeti,exc80h60
+ - const: eeti,exc80h84
+ - items:
+ - enum:
+ - eeti,exc81w32
+ - const: eeti,exc80h84
reg:
const: 0x2a
interrupts:
diff --git a/Bindings/input/touchscreen/ektf2127.txt b/Bindings/input/touchscreen/ektf2127.txt
deleted file mode 100644
index c9f2c9f..0000000
--- a/Bindings/input/touchscreen/ektf2127.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Elan eKTF2127 I2C touchscreen controller
-
-Required properties:
- - compatible : "elan,ektf2127" or "elan,ektf2132"
- - reg : I2C slave address of the chip (0x40)
- - interrupts : interrupt specification for the ektf2127 interrupt
- - power-gpios : GPIO specification for the pin connected to the
- ektf2127's wake input. This needs to be driven high
- to take ektf2127 out of its low power state
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
-i2c@00000000 {
- ektf2127: touchscreen@15 {
- compatible = "elan,ektf2127";
- reg = <0x15>;
- interrupt-parent = <&pio>;
- interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
- power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
- touchscreen-inverted-x;
- touchscreen-swapped-x-y;
- };
-};
diff --git a/Bindings/input/touchscreen/elan,ektf2127.yaml b/Bindings/input/touchscreen/elan,ektf2127.yaml
new file mode 100644
index 0000000..ff0ec3f
--- /dev/null
+++ b/Bindings/input/touchscreen/elan,ektf2127.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTF2127 I2C touchscreen controller
+
+maintainers:
+ - Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - elan,ektf2127
+ - elan,ektf2132
+ - elan,ektf2232
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@15 {
+ compatible = "elan,ektf2127";
+ reg = <0x15>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+ };
+...
diff --git a/Bindings/input/touchscreen/himax,hx83112b.yaml b/Bindings/input/touchscreen/himax,hx83112b.yaml
index f42b23d..f5cfacb 100644
--- a/Bindings/input/touchscreen/himax,hx83112b.yaml
+++ b/Bindings/input/touchscreen/himax,hx83112b.yaml
@@ -15,6 +15,7 @@
properties:
compatible:
enum:
+ - himax,hx83100a
- himax,hx83112b
reg:
diff --git a/Bindings/input/touchscreen/imagis,ist3038c.yaml b/Bindings/input/touchscreen/imagis,ist3038c.yaml
index 77ba280..e24cbd9 100644
--- a/Bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/Bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -16,6 +16,7 @@
compatible:
enum:
- imagis,ist3032c
+ - imagis,ist3038
- imagis,ist3038b
- imagis,ist3038c
diff --git a/Bindings/interconnect/mediatek,mt8183-emi.yaml b/Bindings/interconnect/mediatek,mt8183-emi.yaml
new file mode 100644
index 0000000..017c847
--- /dev/null
+++ b/Bindings/interconnect/mediatek,mt8183-emi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,mt8183-emi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek External Memory Interface (EMI) Interconnect
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+ EMI interconnect providers support system bandwidth requirements through
+ Dynamic Voltage Frequency Scaling Resource Collector (DVFSRC) hardware.
+ The provider is able to communicate with the DVFSRC through Secure Monitor
+ Call (SMC).
+
+ ICC provider ICC Nodes
+ ---- ----
+ _________ |CPU | |--- |VPU |
+ _____ | |----- ---- | ----
+ | |->| DRAM | ---- | ----
+ |DRAM |->|scheduler|----- |GPU | |--- |DISP|
+ | |->| (EMI) | ---- | ----
+ |_____|->|_________|---. ----- | ----
+ /|\ `-|MMSYS|--|--- |VDEC|
+ | ----- | ----
+ | | ----
+ | change DRAM freq |--- |VENC|
+ -------- | ----
+ SMC --> | DVFSRC | | ----
+ -------- |--- |IMG |
+ | ----
+ | ----
+ |--- |CAM |
+ ----
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8183-emi
+ - mediatek,mt8195-emi
+
+ '#interconnect-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#interconnect-cells'
+
+unevaluatedProperties: false
diff --git a/Bindings/interconnect/qcom,msm8953.yaml b/Bindings/interconnect/qcom,msm8953.yaml
new file mode 100644
index 0000000..732e9fa
--- /dev/null
+++ b/Bindings/interconnect/qcom,msm8953.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8953 Network-On-Chip interconnect
+
+maintainers:
+ - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description: |
+ The Qualcomm MSM8953 interconnect providers support adjusting the
+ bandwidth requirements between the various NoC fabrics.
+
+ See also:
+ - dt-bindings/interconnect/qcom,msm8953.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8953-bimc
+ - qcom,msm8953-pcnoc
+ - qcom,msm8953-snoc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ '#interconnect-cells':
+ const: 2
+
+patternProperties:
+ '^interconnect-[a-z0-9\-]+$':
+ type: object
+ $ref: qcom,rpm-common.yaml#
+ unevaluatedProperties: false
+ description:
+ The interconnect providers do not have a separate QoS register space,
+ but share parent's space.
+
+ properties:
+ compatible:
+ const: qcom,msm8953-snoc-mm
+
+ required:
+ - compatible
+ - '#interconnect-cells'
+
+required:
+ - compatible
+ - reg
+ - '#interconnect-cells'
+
+allOf:
+ - $ref: qcom,rpm-common.yaml#
+ - if:
+ properties:
+ compatible:
+ const: qcom,msm8953-pcnoc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: PCNOC USB3 AXI Clock.
+
+ clock-names:
+ const: pcnoc_usb3_axi
+
+ required:
+ - clocks
+ - clock-names
+ else:
+ properties:
+ clocks: false
+ clock-names: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+
+ snoc: interconnect@580000 {
+ compatible = "qcom,msm8953-snoc";
+ reg = <0x580000 0x16080>;
+
+ #interconnect-cells = <2>;
+
+ snoc_mm: interconnect-snoc {
+ compatible = "qcom,msm8953-snoc-mm";
+
+ #interconnect-cells = <2>;
+ };
+ };
diff --git a/Bindings/interconnect/qcom,msm8998-bwmon.yaml b/Bindings/interconnect/qcom,msm8998-bwmon.yaml
index 05067e1..2cd1f55 100644
--- a/Bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/Bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -35,6 +35,7 @@
- qcom,sm8250-cpu-bwmon
- qcom,sm8550-cpu-bwmon
- qcom,sm8650-cpu-bwmon
+ - qcom,x1e80100-cpu-bwmon
- const: qcom,sdm845-bwmon # BWMON v4, unified register space
- items:
- enum:
@@ -44,6 +45,7 @@
- qcom,sm8250-llcc-bwmon
- qcom,sm8550-llcc-bwmon
- qcom,sm8650-llcc-bwmon
+ - qcom,x1e80100-llcc-bwmon
- const: qcom,sc7280-llcc-bwmon
- const: qcom,sc7280-llcc-bwmon # BWMON v5
- const: qcom,sdm845-llcc-bwmon # BWMON v5
@@ -72,7 +74,6 @@
- interconnects
- interrupts
- operating-points-v2
- - opp-table
- reg
additionalProperties: false
diff --git a/Bindings/interconnect/qcom,sc7280-rpmh.yaml b/Bindings/interconnect/qcom,sc7280-rpmh.yaml
index b135597..9fce720 100644
--- a/Bindings/interconnect/qcom,sc7280-rpmh.yaml
+++ b/Bindings/interconnect/qcom,sc7280-rpmh.yaml
@@ -35,6 +35,10 @@
reg:
maxItems: 1
+ clocks:
+ minItems: 1
+ maxItems: 2
+
required:
- compatible
@@ -53,10 +57,50 @@
required:
- reg
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-aggre1-noc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: aggre UFS PHY AXI clock
+ - description: aggre USB3 PRIM AXI clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-aggre2-noc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: RPMH CC IPA clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-aggre1-noc
+ - qcom,sc7280-aggre2-noc
+ then:
+ required:
+ - clocks
+ else:
+ properties:
+ clocks: false
+
unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
interconnect {
compatible = "qcom,sc7280-clk-virt";
#interconnect-cells = <2>;
@@ -69,3 +113,12 @@
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
+
+ interconnect@16e0000 {
+ reg = <0x016e0000 0x1c080>;
+ compatible = "qcom,sc7280-aggre1-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+ };
diff --git a/Bindings/interrupt-controller/fsl,irqsteer.yaml b/Bindings/interrupt-controller/fsl,irqsteer.yaml
index 20ad4ad..aae676b 100644
--- a/Bindings/interrupt-controller/fsl,irqsteer.yaml
+++ b/Bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -14,7 +14,10 @@
oneOf:
- const: fsl,imx-irqsteer
- items:
- - const: fsl,imx8m-irqsteer
+ - enum:
+ - fsl,imx8m-irqsteer
+ - fsl,imx8mp-irqsteer
+ - fsl,imx8qxp-irqsteer
- const: fsl,imx-irqsteer
reg:
@@ -42,6 +45,9 @@
clock-names:
const: ipg
+ power-domains:
+ maxItems: 1
+
interrupt-controller: true
"#interrupt-cells":
@@ -70,6 +76,21 @@
- fsl,channel
- fsl,num-irqs
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mp-irqsteer
+ - fsl,imx8qxp-irqsteer
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains: false
+
additionalProperties: false
examples:
diff --git a/Bindings/interrupt-controller/fsl,ls-extirq.yaml b/Bindings/interrupt-controller/fsl,ls-extirq.yaml
index 887e565..199b34f 100644
--- a/Bindings/interrupt-controller/fsl,ls-extirq.yaml
+++ b/Bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -8,7 +8,6 @@
maintainers:
- Shawn Guo <shawnguo@kernel.org>
- - Li Yang <leoyang.li@nxp.com>
description: |
Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
diff --git a/Bindings/interrupt-controller/fsl,ls-msi.yaml b/Bindings/interrupt-controller/fsl,ls-msi.yaml
new file mode 100644
index 0000000..9ba8d4d
--- /dev/null
+++ b/Bindings/interrupt-controller/fsl,ls-msi.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape SCFG PCIe MSI controller
+
+description: |
+ This interrupt controller hardware is a second level interrupt controller that
+ is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+ platforms. If interrupt-parent is not provided, the default parent interrupt
+ controller will be used.
+
+ Each PCIe node needs to have property msi-parent that points to
+ MSI controller node
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1012a-msi
+ - fsl,ls1021a-msi
+ - fsl,ls1043a-msi
+ - fsl,ls1043a-v1.1-msi
+ - fsl,ls1046a-msi
+
+ reg:
+ maxItems: 1
+
+ '#msi-cells':
+ const: 1
+
+ interrupts:
+ items:
+ - description: Shared MSI interrupt group 0
+ - description: Shared MSI interrupt group 1
+ - description: Shared MSI interrupt group 2
+ - description: Shared MSI interrupt group 3
+ minItems: 1
+
+required:
+ - compatible
+ - reg
+ - msi-controller
+ - interrupts
+
+allOf:
+ - $ref: msi-controller.yaml
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,ls1046a-msi
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ interrupt-controller@1571000 {
+ compatible = "fsl,ls1043a-msi";
+ reg = <0x1571000 0x8>;
+ msi-controller;
+ #msi-cells = <1>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt
deleted file mode 100644
index 454ce04..0000000
--- a/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Freescale Layerscape SCFG PCIe MSI controller
-
-Required properties:
-
-- compatible: should be "fsl,<soc-name>-msi" to identify
- Layerscape PCIe MSI controller block such as:
- "fsl,ls1021a-msi"
- "fsl,ls1043a-msi"
- "fsl,ls1046a-msi"
- "fsl,ls1043a-v1.1-msi"
- "fsl,ls1012a-msi"
-- msi-controller: indicates that this is a PCIe MSI controller node
-- reg: physical base address of the controller and length of memory mapped.
-- interrupts: an interrupt to the parent interrupt controller.
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. If interrupt-parent is not provided, the default parent interrupt
-controller will be used.
-Each PCIe node needs to have property msi-parent that points to
-MSI controller node
-
-Examples:
-
- msi1: msi-controller@1571000 {
- compatible = "fsl,ls1043a-msi";
- reg = <0x0 0x1571000 0x0 0x8>,
- msi-controller;
- interrupts = <0 116 0x4>;
- };
diff --git a/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
deleted file mode 100644
index 5fc0313..0000000
--- a/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Marvell Armada 370, 375, 38x, XP Interrupt Controller
------------------------------------------------------
-
-Required properties:
-- compatible: Should be "marvell,mpic"
-- interrupt-controller: Identifies the node as an interrupt controller.
-- msi-controller: Identifies the node as an PCI Message Signaled
- Interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
- The cell is the IRQ number
-
-- reg: Should contain PMIC registers location and length. First pair
- for the main interrupt registers, second pair for the per-CPU
- interrupt registers. For this last pair, to be compliant with SMP
- support, the "virtual" must be use (For the record, these registers
- automatically map to the interrupt controller registers of the
- current CPU)
-
-Optional properties:
-
-- interrupts: If defined, then it indicates that this MPIC is
- connected as a slave to another interrupt controller. This is
- typically the case on Armada 375 and Armada 38x, where the MPIC is
- connected as a slave to the Cortex-A9 GIC. The provided interrupt
- indicate to which GIC interrupt the MPIC output is connected.
-
-Example:
-
- mpic: interrupt-controller@d0020000 {
- compatible = "marvell,mpic";
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- msi-controller;
- reg = <0xd0020a00 0x1d0>,
- <0xd0021070 0x58>;
- };
diff --git a/Bindings/interrupt-controller/marvell,mpic.yaml b/Bindings/interrupt-controller/marvell,mpic.yaml
new file mode 100644
index 0000000..616a41c
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,mpic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,mpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370, 375, 38x, 39x, XP Interrupt Controller
+
+maintainers:
+ - Marek Behún <kabel@kernel.org>
+
+description: |
+ The top-level interrupt controller on Marvell Armada 370 and XP. On these
+ platforms it also provides inter-processor interrupts.
+
+ On Marvell Armada 375, 38x and 39x this controller is wired under ARM GIC.
+
+ Provides MSI handling for the PCIe controllers.
+
+properties:
+ compatible:
+ const: marvell,mpic
+
+ reg:
+ items:
+ - description: main registers
+ - description: per-cpu registers
+
+ interrupts:
+ items:
+ - description: |
+ Parent interrupt on platforms where MPIC is not the top-level
+ interrupt controller.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ msi-controller: true
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - msi-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ interrupt-controller@20a00 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ msi-controller;
+ };
diff --git a/Bindings/interrupt-controller/microchip,lan966x-oic.yaml b/Bindings/interrupt-controller/microchip,lan966x-oic.yaml
new file mode 100644
index 0000000..b2adc71
--- /dev/null
+++ b/Bindings/interrupt-controller/microchip,lan966x-oic.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,lan966x-oic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x outband interrupt controller
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+ The Microchip LAN966x outband interrupt controller (OIC) maps the internal
+ interrupt sources of the LAN966x device to an external interrupt.
+ When the LAN966x device is used as a PCI device, the external interrupt is
+ routed to the PCI interrupt.
+
+properties:
+ compatible:
+ const: microchip,lan966x-oic
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+ - interrupts
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@e00c0120 {
+ compatible = "microchip,lan966x-oic";
+ reg = <0xe00c0120 0x190>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ interrupt-parent = <&intc>;
+ };
+...
diff --git a/Bindings/interrupt-controller/qcom,pdc.yaml b/Bindings/interrupt-controller/qcom,pdc.yaml
index 4bdc832..985fa10 100644
--- a/Bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Bindings/interrupt-controller/qcom,pdc.yaml
@@ -30,6 +30,7 @@
- qcom,sa8775p-pdc
- qcom,sc7180-pdc
- qcom,sc7280-pdc
+ - qcom,sc8180x-pdc
- qcom,sc8280xp-pdc
- qcom,sdm670-pdc
- qcom,sdm845-pdc
diff --git a/Bindings/interrupt-controller/realtek,rtl-intc.yaml b/Bindings/interrupt-controller/realtek,rtl-intc.yaml
index fb55937..833a01c 100644
--- a/Bindings/interrupt-controller/realtek,rtl-intc.yaml
+++ b/Bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -25,6 +25,7 @@
- items:
- enum:
- realtek,rtl8380-intc
+ - realtek,rtl9300-intc
- const: realtek,rtl-intc
- const: realtek,rtl-intc
deprecated: true
@@ -35,7 +36,10 @@
const: 1
reg:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: vpe0 registers
+ - description: vpe1 registers
interrupts:
minItems: 1
@@ -71,6 +75,20 @@
else:
required:
- interrupts
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: realtek,rtl9300-intc
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ else:
+ properties:
+ reg:
+ maxItems: 1
additionalProperties: false
diff --git a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index daef4ee..44b6ae5 100644
--- a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -21,13 +21,16 @@
properties:
compatible:
- items:
- - enum:
- - renesas,r9a07g043u-irqc # RZ/G2UL
- - renesas,r9a07g044-irqc # RZ/G2{L,LC}
- - renesas,r9a07g054-irqc # RZ/V2L
- - renesas,r9a08g045-irqc # RZ/G3S
- - const: renesas,rzg2l-irqc
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g043u-irqc # RZ/G2UL
+ - renesas,r9a07g044-irqc # RZ/G2{L,LC}
+ - renesas,r9a07g054-irqc # RZ/V2L
+ - renesas,r9a08g045-irqc # RZ/G3S
+ - const: renesas,rzg2l-irqc
+
+ - const: renesas,r9a07g043f-irqc # RZ/Five
'#interrupt-cells':
description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the
diff --git a/Bindings/interrupt-controller/riscv,cpu-intc.txt b/Bindings/interrupt-controller/riscv,cpu-intc.txt
deleted file mode 100644
index 265b223..0000000
--- a/Bindings/interrupt-controller/riscv,cpu-intc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-RISC-V Hart-Level Interrupt Controller (HLIC)
----------------------------------------------
-
-RISC-V cores include Control Status Registers (CSRs) which are local to each
-CPU core (HART in RISC-V terminology) and can be read or written by software.
-Some of these CSRs are used to control local interrupts connected to the core.
-Every interrupt is ultimately routed through a hart's HLIC before it
-interrupts that hart.
-
-The RISC-V supervisor ISA manual specifies three interrupt sources that are
-attached to every HLIC: software interrupts, the timer interrupt, and external
-interrupts. Software interrupts are used to send IPIs between cores. The
-timer interrupt comes from an architecturally mandated real-time timer that is
-controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External
-interrupts connect all other device interrupts to the HLIC, which are routed
-via the platform-level interrupt controller (PLIC).
-
-All RISC-V systems that conform to the supervisor ISA specification are
-required to have a HLIC with these three interrupt sources present. Since the
-interrupt map is defined by the ISA it's not listed in the HLIC's device tree
-entry, though external interrupt controllers (like the PLIC, for example) will
-need to define how their interrupts map to the relevant HLICs. This means
-a PLIC interrupt property will typically list the HLICs for all present HARTs
-in the system.
-
-Required properties:
-- compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>. The interrupt sources are defined by the
- RISC-V supervisor ISA manual, with only the following three interrupts being
- defined for supervisor mode:
- - Source 1 is the supervisor software interrupt, which can be sent by an SBI
- call and is reserved for use by software.
- - Source 5 is the supervisor timer interrupt, which can be configured by
- SBI calls and implements a one-shot timer.
- - Source 9 is the supervisor external interrupt, which chains to all other
- device interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller
-
-Furthermore, this interrupt-controller MUST be embedded inside the cpu
-definition of the hart whose CSRs control these local interrupts.
-
-An example device tree entry for a HLIC is show below.
-
- cpu1: cpu@1 {
- compatible = "riscv";
- ...
- cpu1-intc: interrupt-controller {
- #interrupt-cells = <1>;
- compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
- interrupt-controller;
- };
- };
diff --git a/Bindings/interrupt-controller/riscv,cpu-intc.yaml b/Bindings/interrupt-controller/riscv,cpu-intc.yaml
new file mode 100644
index 0000000..83256cc
--- /dev/null
+++ b/Bindings/interrupt-controller/riscv,cpu-intc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,cpu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Hart-Level Interrupt Controller (HLIC)
+
+description:
+ RISC-V cores include Control Status Registers (CSRs) which are local to
+ each CPU core (HART in RISC-V terminology) and can be read or written by
+ software. Some of these CSRs are used to control local interrupts connected
+ to the core. Every interrupt is ultimately routed through a hart's HLIC
+ before it interrupts that hart.
+
+ The RISC-V supervisor ISA manual specifies three interrupt sources that are
+ attached to every HLIC namely software interrupts, the timer interrupt, and
+ external interrupts. Software interrupts are used to send IPIs between
+ cores. The timer interrupt comes from an architecturally mandated real-
+ time timer that is controlled via Supervisor Binary Interface (SBI) calls
+ and CSR reads. External interrupts connect all other device interrupts to
+ the HLIC, which are routed via the platform-level interrupt controller
+ (PLIC).
+
+ All RISC-V systems that conform to the supervisor ISA specification are
+ required to have a HLIC with these three interrupt sources present. Since
+ the interrupt map is defined by the ISA it's not listed in the HLIC's device
+ tree entry, though external interrupt controllers (like the PLIC, for
+ example) will need to define how their interrupts map to the relevant HLICs.
+ This means a PLIC interrupt property will typically list the HLICs for all
+ present HARTs in the system.
+
+maintainers:
+ - Palmer Dabbelt <palmer@dabbelt.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: andestech,cpu-intc
+ - const: riscv,cpu-intc
+ - const: riscv,cpu-intc
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+ description: |
+ The interrupt sources are defined by the RISC-V supervisor ISA manual,
+ with only the following three interrupts being defined for
+ supervisor mode:
+ - Source 1 is the supervisor software interrupt, which can be sent by
+ an SBI call and is reserved for use by software.
+ - Source 5 is the supervisor timer interrupt, which can be configured
+ by SBI calls and implements a one-shot timer.
+ - Source 9 is the supervisor external interrupt, which chains to all
+ other device interrupts.
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
diff --git a/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml
index e20016f..a8409db 100644
--- a/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml
+++ b/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -17,7 +17,12 @@
The content of the cell is the master ID.
compatible:
- const: allwinner,sun50i-h6-iommu
+ oneOf:
+ - const: allwinner,sun50i-h6-iommu
+ - const: allwinner,sun50i-h616-iommu
+ - items:
+ - const: allwinner,sun55i-a523-iommu
+ - const: allwinner,sun50i-h616-iommu
reg:
maxItems: 1
diff --git a/Bindings/iommu/arm,smmu.yaml b/Bindings/iommu/arm,smmu.yaml
index 5c130cf..280b4e4 100644
--- a/Bindings/iommu/arm,smmu.yaml
+++ b/Bindings/iommu/arm,smmu.yaml
@@ -86,6 +86,7 @@
- qcom,qcm2290-smmu-500
- qcom,sa8775p-smmu-500
- qcom,sc7280-smmu-500
+ - qcom,sc8180x-smmu-500
- qcom,sc8280xp-smmu-500
- qcom,sm6115-smmu-500
- qcom,sm6125-smmu-500
@@ -95,6 +96,7 @@
- qcom,sm8450-smmu-500
- qcom,sm8550-smmu-500
- qcom,sm8650-smmu-500
+ - qcom,x1e80100-smmu-500
- const: qcom,adreno-smmu
- const: qcom,smmu-500
- const: arm,mmu-500
@@ -415,6 +417,7 @@
compatible:
contains:
enum:
+ - qcom,sc8180x-smmu-500
- qcom,sm6350-smmu-v2
- qcom,sm7150-smmu-v2
- qcom,sm8150-smmu-500
@@ -520,6 +523,7 @@
- enum:
- qcom,sm8550-smmu-500
- qcom,sm8650-smmu-500
+ - qcom,x1e80100-smmu-500
- const: qcom,adreno-smmu
- const: qcom,smmu-500
- const: arm,mmu-500
@@ -550,14 +554,12 @@
- nvidia,smmu-500
- qcom,qdu1000-smmu-500
- qcom,sc7180-smmu-500
- - qcom,sc8180x-smmu-500
- qcom,sdm670-smmu-500
- qcom,sdm845-smmu-500
- qcom,sdx55-smmu-500
- qcom,sdx65-smmu-500
- qcom,sm6350-smmu-500
- qcom,sm6375-smmu-500
- - qcom,x1e80100-smmu-500
then:
properties:
clock-names: false
diff --git a/Bindings/iommu/msm,iommu-v0.txt b/Bindings/iommu/msm,iommu-v0.txt
deleted file mode 100644
index 2023638..0000000
--- a/Bindings/iommu/msm,iommu-v0.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* QCOM IOMMU
-
-The MSM IOMMU is an implementation compatible with the ARM VMSA short
-descriptor page tables. It provides address translation for bus masters outside
-of the CPU, each connected to the IOMMU through a port called micro-TLB.
-
-Required Properties:
-
- - compatible: Must contain "qcom,apq8064-iommu".
- - reg: Base address and size of the IOMMU registers.
- - interrupts: Specifiers for the MMU fault interrupts. For instances that
- support secure mode two interrupts must be specified, for non-secure and
- secure mode, in that order. For instances that don't support secure mode a
- single interrupt must be specified.
- - #iommu-cells: The number of cells needed to specify the stream id. This
- is always 1.
- - qcom,ncb: The total number of context banks in the IOMMU.
- - clocks : List of clocks to be used during SMMU register access. See
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- for information about the format. For each clock specified
- here, there must be a corresponding entry in clock-names
- (see below).
-
- - clock-names : List of clock names corresponding to the clocks specified in
- the "clocks" property (above).
- Should be "smmu_pclk" for specifying the interface clock
- required for iommu's register accesses.
- Should be "smmu_clk" for specifying the functional clock
- required by iommu for bus accesses.
-
-Each bus master connected to an IOMMU must reference the IOMMU in its device
-node with the following property:
-
- - iommus: A reference to the IOMMU in multiple cells. The first cell is a
- phandle to the IOMMU and the second cell is the stream id.
- A single master device can be connected to more than one iommu
- and multiple contexts in each of the iommu. So multiple entries
- are required to list all the iommus and the stream ids that the
- master is connected to.
-
-Example: mdp iommu and its bus master
-
- mdp_port0: iommu@7500000 {
- compatible = "qcom,apq8064-iommu";
- #iommu-cells = <1>;
- clock-names =
- "smmu_pclk",
- "smmu_clk";
- clocks =
- <&mmcc SMMU_AHB_CLK>,
- <&mmcc MDP_AXI_CLK>;
- reg = <0x07500000 0x100000>;
- interrupts =
- <GIC_SPI 63 0>,
- <GIC_SPI 64 0>;
- qcom,ncb = <2>;
- };
-
- mdp: qcom,mdp@5100000 {
- compatible = "qcom,mdp";
- ...
- iommus = <&mdp_port0 0
- &mdp_port0 2>;
- };
diff --git a/Bindings/iommu/qcom,apq8064-iommu.yaml b/Bindings/iommu/qcom,apq8064-iommu.yaml
new file mode 100644
index 0000000..9f83f85
--- /dev/null
+++ b/Bindings/iommu/qcom,apq8064-iommu.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iommu/qcom,apq8064-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APQ8064 IOMMU
+
+maintainers:
+ - David Heidelberg <david@ixit.cz>
+
+description:
+ The MSM IOMMU is an implementation compatible with the ARM VMSA short
+ descriptor page tables. It provides address translation for bus masters
+ outside of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+properties:
+ compatible:
+ const: qcom,apq8064-iommu
+
+ clocks:
+ items:
+ - description: interface clock for register accesses
+ - description: functional clock for bus accesses
+
+ clock-names:
+ items:
+ - const: smmu_pclk
+ - const: iommu_clk
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Specifiers for the MMU fault interrupts.
+ minItems: 1
+ items:
+ - description: non-secure mode interrupt
+ - description: secure mode interrupt (for instances which supports it)
+
+ "#iommu-cells":
+ const: 1
+ description: Each IOMMU specifier describes a single Stream ID.
+
+ qcom,ncb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The total number of context banks in the IOMMU.
+ minimum: 1
+ maximum: 4
+
+required:
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - qcom,ncb
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ iommu@7500000 {
+ compatible = "qcom,apq8064-iommu";
+ reg = <0x07500000 0x100000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk SMMU_AHB_CLK>,
+ <&clk MDP_AXI_CLK>;
+ clock-names = "smmu_pclk",
+ "iommu_clk";
+ #iommu-cells = <1>;
+ qcom,ncb = <2>;
+ };
diff --git a/Bindings/iommu/qcom,iommu.yaml b/Bindings/iommu/qcom,iommu.yaml
index a74eb89..571e574 100644
--- a/Bindings/iommu/qcom,iommu.yaml
+++ b/Bindings/iommu/qcom,iommu.yaml
@@ -25,6 +25,7 @@
- const: qcom,msm-iommu-v1
- items:
- enum:
+ - qcom,msm8953-iommu
- qcom,msm8976-iommu
- const: qcom,msm-iommu-v2
diff --git a/Bindings/leds/backlight/ti,lm3509.yaml b/Bindings/leds/backlight/ti,lm3509.yaml
new file mode 100644
index 0000000..482fae7
--- /dev/null
+++ b/Bindings/leds/backlight/ti,lm3509.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays
+
+maintainers:
+ - Patrick Gansterer <paroga@paroga.com>
+
+description:
+ The LM3509 current mode boost converter offers two separate outputs.
+ https://www.ti.com/product/LM3509
+
+properties:
+ compatible:
+ const: ti,lm3509
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reset-gpios:
+ maxItems: 1
+
+ ti,brightness-rate-of-change-us:
+ description: Brightness Rate of Change in microseconds.
+ enum: [51, 13000, 26000, 52000]
+
+ ti,oled-mode:
+ description: Enable OLED mode.
+ type: boolean
+
+patternProperties:
+ "^led@[01]$":
+ type: object
+ description: Properties for a string of connected LEDs.
+ $ref: common.yaml#
+
+ properties:
+ reg:
+ description:
+ The control register that is used to program the two current sinks.
+ The LM3509 has two registers (BMAIN and BSUB) and are represented
+ as 0 or 1 in this property. The two current sinks can be controlled
+ independently with both registers, or register BMAIN can be
+ configured to control both sinks with the led-sources property.
+ minimum: 0
+ maximum: 1
+
+ label: true
+
+ led-sources:
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+ default-brightness:
+ minimum: 0
+ maximum: 31
+ default: 18
+
+ max-brightness:
+ minimum: 0
+ maximum: 31
+ default: 31
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@36 {
+ compatible = "ti,lm3509";
+ reg = <0x36>;
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+ ti,oled-mode;
+ ti,brightness-rate-of-change-us = <52000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <12>;
+ max-brightness = <31>;
+ };
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@36 {
+ compatible = "ti,lm3509";
+ reg = <0x36>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ default-brightness = <12>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-brightness = <15>;
+ };
+ };
+ };
diff --git a/Bindings/leds/leds-lp55xx.yaml b/Bindings/leds/leds-lp55xx.yaml
index e9d4514..fe8aaec 100644
--- a/Bindings/leds/leds-lp55xx.yaml
+++ b/Bindings/leds/leds-lp55xx.yaml
@@ -28,6 +28,7 @@
- national,lp5523
- ti,lp55231
- ti,lp5562
+ - ti,lp5569
- ti,lp8501
reg:
@@ -151,6 +152,16 @@
$ref: /schemas/types.yaml#/definitions/string
description: name of channel
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: ti,lp8501
+then:
+ properties:
+ pwr-sel: false
+
required:
- compatible
- reg
diff --git a/Bindings/leds/silergy,sy7802.yaml b/Bindings/leds/silergy,sy7802.yaml
new file mode 100644
index 0000000..46b8e54
--- /dev/null
+++ b/Bindings/leds/silergy,sy7802.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/silergy,sy7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silergy SY7802 1800mA Boost Charge Pump LED Driver
+
+maintainers:
+ - André Apitzsch <git@apitzsch.eu>
+
+description: |
+ The SY7802 is a current-regulated charge pump which can regulate two current
+ levels for Flash and Torch modes.
+
+ The SY7802 is a high-current synchronous boost converter with 2-channel
+ high side current sources. Each channel is able to deliver 900mA current.
+
+properties:
+ compatible:
+ enum:
+ - silergy,sy7802
+
+ reg:
+ maxItems: 1
+
+ enable-gpios:
+ maxItems: 1
+ description: A connection to the 'EN' pin.
+
+ flash-gpios:
+ maxItems: 1
+ description: A connection to the 'FLEN' pin.
+
+ vin-supply:
+ description: Regulator providing power to the 'VIN' pin.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-1]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: Index of the LED.
+ minimum: 0
+ maximum: 1
+
+ led-sources:
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+ required:
+ - reg
+ - led-sources
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash-led-controller@53 {
+ compatible = "silergy,sy7802";
+ reg = <0x53>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <0>, <1>;
+ };
+ };
+ };
diff --git a/Bindings/mailbox/mediatek,gce-props.yaml b/Bindings/mailbox/mediatek,gce-props.yaml
new file mode 100644
index 0000000..c25eed4
--- /dev/null
+++ b/Bindings/mailbox/mediatek,gce-props.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Global Command Engine Common Properties
+
+maintainers:
+ - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+ The Global Command Engine (GCE) is an instruction based, multi-threaded,
+ single-core command dispatcher for MediaTek hardware. The Command Queue
+ (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux
+ mailbox framework. It is used to receive messages from mailbox consumers
+ and configure GCE to execute the specified instruction set in the message.
+ We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox
+ driver. A device driver that uses the CMDQ driver to configure its hardware
+ registers is a mailbox consumer. The mailbox consumer can request a mailbox
+ channel corresponding to a GCE hardware thread to send a message, specifying
+ that the GCE thread to configure its hardware. The mailbox provider can also
+ reserve a mailbox channel to configure GCE hardware register by the specific
+ GCE thread. This binding defines the common GCE properties for both mailbox
+ provider and consumers.
+
+properties:
+ mediatek,gce-events:
+ description:
+ GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023).
+ Each event ID has a boolean event value with the default value 0.
+ The property mediatek,gce-events is used to obtain the event IDs.
+ Some gce-events are hardware-bound and cannot be changed by software.
+ For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will
+ send an event signal to GCE, setting the value of event ID 597 to 1.
+ Similarly, in MT8188, the value of event ID 574 will be set to 1 when
+ VOD0_MUTEX is stream done.
+ On the other hand, some gce-events are not hardware-bound and can be
+ changed by software. For example, in MT8188, we can set the value of
+ event ID 855, which is not bound to any hardware, to 1 when the driver
+ in the secure world completes a task. However, in MT8195, event ID 855
+ is already bound to VDEC_LAT1, so we need to select another event ID to
+ achieve the same purpose. This event ID can be any ID that is not bound
+ to any hardware and is not yet used in any software driver.
+ To determine if the event ID is bound to the hardware or used by a
+ software driver, refer to the GCE header
+ include/dt-bindings/gce/<chip>-gce.h of each chip.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+
+additionalProperties: true
diff --git a/Bindings/mailbox/qcom,cpucp-mbox.yaml b/Bindings/mailbox/qcom,cpucp-mbox.yaml
new file mode 100644
index 0000000..f7342d0
--- /dev/null
+++ b/Bindings/mailbox/qcom,cpucp-mbox.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom,cpucp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUCP Mailbox Controller
+
+maintainers:
+ - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+ The CPUSS Control Processor (CPUCP) mailbox controller enables communication
+ between AP and CPUCP by acting as a doorbell between them.
+
+properties:
+ compatible:
+ items:
+ - const: qcom,x1e80100-cpucp-mbox
+
+ reg:
+ items:
+ - description: CPUCP rx register region
+ - description: CPUCP tx register region
+
+ interrupts:
+ maxItems: 1
+
+ "#mbox-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox@17430000 {
+ compatible = "qcom,x1e80100-cpucp-mbox";
+ reg = <0x17430000 0x10000>, <0x18830000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
diff --git a/Bindings/media/i2c/galaxycore,gc05a2.yaml b/Bindings/media/i2c/galaxycore,gc05a2.yaml
new file mode 100644
index 0000000..0e7a7b5
--- /dev/null
+++ b/Bindings/media/i2c/galaxycore,gc05a2.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc05a2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc05a2 1/5" 5M Pixel MIPI CSI-2 sensor
+
+maintainers:
+ - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+ The gc05a2 is a raw image sensor with an MIPI CSI-2 image data
+ interface and CCI (I2C compatible) control bus. The output format
+ is raw Bayer.
+
+properties:
+ compatible:
+ const: galaxycore,gc05a2
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dovdd-supply: true
+
+ avdd-supply: true
+
+ dvdd-supply: true
+
+ reset-gpios:
+ description: Reference to the GPIO connected to the RESETB pin.
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+ description:
+ Output port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - items:
+ - const: 1
+ - const: 2
+
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@37 {
+ compatible = "galaxycore,gc05a2";
+ reg = <0x37>;
+
+ clocks = <&gc05a2_clk>;
+
+ reset-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&gc05a2_avdd>;
+ dovdd-supply = <&gc05a2_dovdd>;
+ dvdd-supply = <&gc05a2_dvdd>;
+
+ port {
+ sensor_out: endpoint {
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <448000000 224000000>;
+ remote-endpoint = <&seninf_csi_port_1_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/media/i2c/galaxycore,gc08a3.yaml b/Bindings/media/i2c/galaxycore,gc08a3.yaml
new file mode 100644
index 0000000..51b8ece
--- /dev/null
+++ b/Bindings/media/i2c/galaxycore,gc08a3.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+ - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+ The gc08a3 is a raw image sensor with an MIPI CSI-2 image data
+ interface and CCI (I2C compatible) control bus. The output format
+ is raw Bayer.
+
+properties:
+ compatible:
+ const: galaxycore,gc08a3
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dovdd-supply: true
+
+ avdd-supply: true
+
+ dvdd-supply: true
+
+ reset-gpios:
+ description: Reference to the GPIO connected to the RESETB pin.
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+ description:
+ Output port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - items:
+ - const: 1
+ - const: 2
+
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@31 {
+ compatible = "galaxycore,gc08a3";
+ reg = <0x31>;
+
+ clocks = <&gc08a3_clk>;
+
+ reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&gc08a3_avdd>;
+ dovdd-supply = <&gc08a3_dovdd>;
+ dvdd-supply = <&gc08a3_dvdd>;
+
+ port {
+ sensor_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <336000000 207000000>;
+ remote-endpoint = <&seninf_csi_port_0_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/media/i2c/maxim,max96714.yaml b/Bindings/media/i2c/maxim,max96714.yaml
new file mode 100644
index 0000000..3ace50e
--- /dev/null
+++ b/Bindings/media/i2c/maxim,max96714.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer
+
+maintainers:
+ - Julien Massot <julien.massot@collabora.com>
+
+description:
+ The MAX96714 deserializer converts GMSL2 serial inputs into MIPI
+ CSI-2 D-PHY formatted output. The device allows the GMSL2 link to
+ simultaneously transmit bidirectional control-channel data while forward
+ video transmissions are in progress. The MAX96714 can connect to one
+ remotely located serializer using industry-standard coax or STP
+ interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+ the MAX96714 can select individual video stream, while the tunnel mode forward all
+ the MIPI data received by the serializer.
+
+ The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+ forward direction and 187.5Mbps in the reverse direction.
+ MAX96714F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+ compatible:
+ oneOf:
+ - const: maxim,max96714f
+ - items:
+ - enum:
+ - maxim,max96714
+ - const: maxim,max96714f
+
+ reg:
+ maxItems: 1
+
+ powerdown-gpios:
+ maxItems: 1
+ description:
+ Specifier for the GPIO connected to the PWDNB pin.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description: GMSL Input
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ description:
+ Endpoint for GMSL2-Link port.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Output port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 5
+
+ link-frequencies:
+ maxItems: 1
+
+ required:
+ - data-lanes
+
+ required:
+ - port@1
+
+ i2c-gate:
+ $ref: /schemas/i2c/i2c-gate.yaml
+ unevaluatedProperties: false
+ description:
+ The MAX96714 will pass through and forward the I2C requests from the
+ incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate
+ subnode to configure a serializer.
+
+ port0-poc-supply:
+ description: Regulator providing Power over Coax for the GMSL port
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deserializer@28 {
+ compatible = "maxim,max96714f";
+ reg = <0x28>;
+ powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ max96714_gmsl_in: endpoint {
+ remote-endpoint = <&max96917f_gmsl_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ max96714_csi_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <400000000>;
+ remote-endpoint = <&csi_in>;
+ };
+ };
+ };
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serializer@40 {
+ compatible = "maxim,max96717f";
+ reg = <0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ max96717f_csi_in: endpoint {
+ data-lanes = <1 2>;
+ lane-polarities = <1 0 1>;
+ remote-endpoint = <&sensor_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ max96917f_gmsl_out: endpoint {
+ remote-endpoint = <&max96714_gmsl_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/media/i2c/maxim,max96717.yaml b/Bindings/media/i2c/maxim,max96717.yaml
new file mode 100644
index 0000000..d1e8ba6
--- /dev/null
+++ b/Bindings/media/i2c/maxim,max96717.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX96717 CSI-2 to GMSL2 Serializer
+
+maintainers:
+ - Julien Massot <julien.massot@collabora.com>
+
+description:
+ The MAX96717 serializer converts MIPI CSI-2 D-PHY formatted input
+ into GMSL2 serial outputs. The device allows the GMSL2 link to
+ simultaneously transmit bidirectional control-channel data while forward
+ video transmissions are in progress. The MAX96717 can connect to one
+ remotely located deserializer using industry-standard coax or STP
+ interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+ the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI
+ data received by the serializer.
+ The MAX96717 supports Reference Over Reverse (channel),
+ to generate a clock output for the sensor from the GMSL reverse channel.
+
+ The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+ forward direction and 187.5Mbps in the reverse direction.
+ MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+ compatible:
+ oneOf:
+ - const: maxim,max96717f
+ - items:
+ - enum:
+ - maxim,max96717
+ - const: maxim,max96717f
+
+ '#gpio-cells':
+ const: 2
+ description:
+ First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+ number must be in range of [0, 10].
+
+ gpio-controller: true
+
+ '#clock-cells':
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Input port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 5
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description: GMSL Output port
+
+ required:
+ - port@1
+
+ i2c-gate:
+ $ref: /schemas/i2c/i2c-gate.yaml
+ unevaluatedProperties: false
+ description:
+ The MAX96717 will forward the I2C requests from the
+ incoming GMSL2 link. Therefore, it supports an i2c-gate
+ subnode to configure a sensor.
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ serializer: serializer@40 {
+ compatible = "maxim,max96717f";
+ reg = <0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ max96717f_csi_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&sensor_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ max96917f_gmsl_out: endpoint {
+ remote-endpoint = <&deser_gmsl_in>;
+ };
+ };
+ };
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sensor@10 {
+ compatible = "st,st-vgxy61";
+ reg = <0x10>;
+ reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+ clocks = <&serializer>;
+ VCORE-supply = <&v1v2>;
+ VDDIO-supply = <&v1v8>;
+ VANA-supply = <&v2v8>;
+ port {
+ sensor_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96717f_csi_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/media/i2c/imx258.yaml b/Bindings/media/i2c/sony,imx258.yaml
similarity index 88%
rename from Bindings/media/i2c/imx258.yaml
rename to Bindings/media/i2c/sony,imx258.yaml
index 80d2422..c978abc 100644
--- a/Bindings/media/i2c/imx258.yaml
+++ b/Bindings/media/i2c/sony,imx258.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/media/i2c/imx258.yaml#
+$id: http://devicetree.org/schemas/media/i2c/sony,imx258.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor
@@ -13,11 +13,16 @@
IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel
type stacked image sensor with a square pixel array of size 4208 x 3120. It
is programmable through I2C interface. Image data is sent through MIPI
- CSI-2.
+ CSI-2. The sensor exists in two different models, a standard variant
+ (IMX258) and a variant with phase detection autofocus (IMX258-PDAF).
+ The camera module does not expose the model through registers, so the
+ exact model needs to be specified.
properties:
compatible:
- const: sony,imx258
+ enum:
+ - sony,imx258
+ - sony,imx258-pdaf
assigned-clocks: true
assigned-clock-parents: true
diff --git a/Bindings/media/i2c/sony,imx283.yaml b/Bindings/media/i2c/sony,imx283.yaml
new file mode 100644
index 0000000..e4f49f1
--- /dev/null
+++ b/Bindings/media/i2c/sony,imx283.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX283 Sensor
+
+maintainers:
+ - Kieran Bingham <kieran.bingham@ideasonboard.com>
+ - Umang Jain <umang.jain@ideasonboard.com>
+
+description:
+ IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
+ array size of 5472H x 3648V. It is programmable through I2C interface. The
+ I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+ sent through MIPI CSI-2.
+
+properties:
+ compatible:
+ const: sony,imx283
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Clock frequency from 6 to 24 MHz.
+ maxItems: 1
+
+ vadd-supply:
+ description: Analog power supply (2.9V)
+
+ vdd1-supply:
+ description: Interface power supply (1.8V)
+
+ vdd2-supply:
+ description: Digital power supply (1.2V)
+
+ reset-gpios:
+ description: Sensor reset (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ anyOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx283";
+ reg = <0x1a>;
+ clocks = <&imx283_clk>;
+
+ assigned-clocks = <&imx283_clk>;
+ assigned-clock-parents = <&imx283_clk_parent>;
+ assigned-clock-rates = <12000000>;
+
+ vadd-supply = <&camera_vadd_2v9>;
+ vdd1-supply = <&camera_vdd1_1v8>;
+ vdd2-supply = <&camera_vdd2_1v2>;
+
+ port {
+ imx283: endpoint {
+ remote-endpoint = <&cam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/media/img,e5010-jpeg-enc.yaml b/Bindings/media/img,e5010-jpeg-enc.yaml
new file mode 100644
index 0000000..085020c
--- /dev/null
+++ b/Bindings/media/img,e5010-jpeg-enc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination E5010 JPEG Encoder
+
+maintainers:
+ - Devarsh Thakkar <devarsht@ti.com>
+
+description: |
+ The E5010 is a JPEG encoder from Imagination Technologies implemented on
+ TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
+ inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
+ 8Kx8K resolution.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: ti,am62a-jpeg-enc
+ - const: img,e5010-jpeg-enc
+ - const: img,e5010-jpeg-enc
+
+ reg:
+ items:
+ - description: The E5010 core register region
+ - description: The E5010 mmu register region
+
+ reg-names:
+ items:
+ - const: core
+ - const: mmu
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ jpeg-encoder@fd20000 {
+ compatible = "img,e5010-jpeg-enc";
+ reg = <0x00 0xfd20000 0x00 0x100>,
+ <0x00 0xfd20200 0x00 0x200>;
+ reg-names = "core", "mmu";
+ clocks = <&k3_clks 201 0>;
+ power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Bindings/media/mediatek,mdp3-rdma.yaml b/Bindings/media/mediatek,mdp3-rdma.yaml
index 59db830..18603f6 100644
--- a/Bindings/media/mediatek,mdp3-rdma.yaml
+++ b/Bindings/media/mediatek,mdp3-rdma.yaml
@@ -23,6 +23,7 @@
oneOf:
- enum:
- mediatek,mt8183-mdp3-rdma
+ - mediatek,mt8188-mdp3-rdma
- mediatek,mt8195-mdp3-rdma
- mediatek,mt8195-vdo1-rdma
- items:
diff --git a/Bindings/media/mediatek,mt7622-cir.yaml b/Bindings/media/mediatek,mt7622-cir.yaml
new file mode 100644
index 0000000..c01210e
--- /dev/null
+++ b/Bindings/media/mediatek,mt7622-cir.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Consumer Infrared Receiver on-SoC Controller
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+ - $ref: rc.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7622-cir
+ - mediatek,mt7623-cir
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: clk
+ - const: bus
+
+required:
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt2701-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ir@10013000 {
+ compatible = "mediatek,mt7623-cir";
+ reg = <0x10013000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_IRRX>, <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "clk", "bus";
+ linux,rc-map-name = "rc-rc6-mce";
+ };
diff --git a/Bindings/media/mtk-cir.txt b/Bindings/media/mtk-cir.txt
deleted file mode 100644
index 5e18087..0000000
--- a/Bindings/media/mtk-cir.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-Tree bindings for Mediatek consumer IR controller
-found in Mediatek SoC family
-
-Required properties:
-- compatible : Should be
- "mediatek,mt7623-cir": for MT7623 SoC
- "mediatek,mt7622-cir": for MT7622 SoC
-- clocks : list of clock specifiers, corresponding to
- entries in clock-names property;
-- clock-names : should contain
- - "clk" entries: for MT7623 SoC
- - "clk", "bus" entries: for MT7622 SoC
-- interrupts : should contain IR IRQ number;
-- reg : should contain IO map address for IR.
-
-Optional properties:
-- linux,rc-map-name : see rc.txt file in the same directory.
-
-Example:
-
-cir: cir@10013000 {
- compatible = "mediatek,mt7623-cir";
- reg = <0 0x10013000 0 0x1000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&infracfg CLK_INFRA_IRRX>;
- clock-names = "clk";
- linux,rc-map-name = "rc-rc6-mce";
-};
diff --git a/Bindings/media/qcom,msm8996-venus.yaml b/Bindings/media/qcom,msm8996-venus.yaml
index 3a4d817..56c1645 100644
--- a/Bindings/media/qcom,msm8996-venus.yaml
+++ b/Bindings/media/qcom,msm8996-venus.yaml
@@ -18,7 +18,9 @@
properties:
compatible:
- const: qcom,msm8996-venus
+ enum:
+ - qcom,msm8996-venus
+ - qcom,msm8998-venus
power-domains:
maxItems: 1
diff --git a/Bindings/media/raspberrypi,pispbe.yaml b/Bindings/media/raspberrypi,pispbe.yaml
new file mode 100644
index 0000000..1fc62a1
--- /dev/null
+++ b/Bindings/media/raspberrypi,pispbe.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/raspberrypi,pispbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi PiSP Image Signal Processor (ISP) Back End
+
+maintainers:
+ - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+ - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+description: |
+ The Raspberry Pi PiSP Image Signal Processor (ISP) Back End is an image
+ processor that fetches images in Bayer or Grayscale format from DRAM memory
+ in tiles and produces images consumable by applications.
+
+ The full ISP documentation is available at
+ https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm2712-pispbe
+ - const: raspberrypi,pispbe
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ isp@880000 {
+ compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
+ reg = <0x10 0x00880000 0x0 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&firmware_clocks 7>;
+ iommus = <&iommu2>;
+ };
+ };
diff --git a/Bindings/media/rc.yaml b/Bindings/media/rc.yaml
index 7bbe580..dedc5a4 100644
--- a/Bindings/media/rc.yaml
+++ b/Bindings/media/rc.yaml
@@ -103,6 +103,7 @@
- rc-msi-digivox-iii
- rc-msi-tvanywhere
- rc-msi-tvanywhere-plus
+ - rc-mygica-utv3
- rc-nebula
- rc-nec-terratec-cinergy-xs
- rc-norwood
diff --git a/Bindings/media/renesas,rzg2l-cru.yaml b/Bindings/media/renesas,rzg2l-cru.yaml
index 1e72b88..bc12451 100644
--- a/Bindings/media/renesas,rzg2l-cru.yaml
+++ b/Bindings/media/renesas,rzg2l-cru.yaml
@@ -19,6 +19,7 @@
compatible:
items:
- enum:
+ - renesas,r9a07g043-cru # RZ/G2UL
- renesas,r9a07g044-cru # RZ/G2{L,LC}
- renesas,r9a07g054-cru # RZ/V2L
- const: renesas,rzg2l-cru
@@ -87,10 +88,6 @@
Input port node, describing the Image Processing module connected to the
CSI-2 receiver.
- required:
- - port@0
- - port@1
-
required:
- compatible
- reg
@@ -102,6 +99,36 @@
- reset-names
- power-domains
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a07g044-cru
+ - renesas,r9a07g054-cru
+ then:
+ properties:
+ ports:
+ required:
+ - port@0
+ - port@1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a07g043-cru
+ then:
+ properties:
+ ports:
+ properties:
+ port@0: false
+
+ required:
+ - port@1
+
additionalProperties: false
examples:
diff --git a/Bindings/media/renesas,rzg2l-csi2.yaml b/Bindings/media/renesas,rzg2l-csi2.yaml
index 67eea2a..7faa12f 100644
--- a/Bindings/media/renesas,rzg2l-csi2.yaml
+++ b/Bindings/media/renesas,rzg2l-csi2.yaml
@@ -19,6 +19,7 @@
compatible:
items:
- enum:
+ - renesas,r9a07g043-csi2 # RZ/G2UL
- renesas,r9a07g044-csi2 # RZ/G2{L,LC}
- renesas,r9a07g054-csi2 # RZ/V2L
- const: renesas,rzg2l-csi2
diff --git a/Bindings/media/rockchip-rga.yaml b/Bindings/media/rockchip-rga.yaml
index ea23422..ac17cda 100644
--- a/Bindings/media/rockchip-rga.yaml
+++ b/Bindings/media/rockchip-rga.yaml
@@ -24,6 +24,7 @@
- enum:
- rockchip,rk3228-rga
- rockchip,rk3568-rga
+ - rockchip,rk3588-rga
- const: rockchip,rk3288-rga
reg:
diff --git a/Bindings/memory-controllers/fsl/fsl,ifc.yaml b/Bindings/memory-controllers/fsl/fsl,ifc.yaml
index 3be1db3..d1c3421 100644
--- a/Bindings/memory-controllers/fsl/fsl,ifc.yaml
+++ b/Bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -7,7 +7,7 @@
title: FSL/NXP Integrated Flash Controller
maintainers:
- - Li Yang <leoyang.li@nxp.com>
+ - Shawn Guo <shawnguo@kernel.org>
description: |
NXP's integrated flash controller (IFC) is an advanced version of the
diff --git a/Bindings/memory-controllers/fsl/mmdc.yaml b/Bindings/memory-controllers/fsl/mmdc.yaml
index 71547ee..5447f1d 100644
--- a/Bindings/memory-controllers/fsl/mmdc.yaml
+++ b/Bindings/memory-controllers/fsl/mmdc.yaml
@@ -7,7 +7,9 @@
title: Freescale Multi Mode DDR controller (MMDC)
maintainers:
- - Anson Huang <Anson.Huang@nxp.com>
+ - Shawn Guo <shawnguo@kernel.org>
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Fabio Estevam <festevam@gmail.com>
properties:
compatible:
diff --git a/Bindings/mfd/marvell,88pm886-a1.yaml b/Bindings/mfd/marvell,88pm886-a1.yaml
new file mode 100644
index 0000000..d6a71c9
--- /dev/null
+++ b/Bindings/mfd/marvell,88pm886-a1.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/marvell,88pm886-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 88PM886 PMIC core
+
+maintainers:
+ - Karel Balej <balejk@matfyz.cz>
+
+description:
+ Marvell 88PM886 is a PMIC providing several functions such as onkey,
+ regulators or battery and charger.
+
+properties:
+ compatible:
+ const: marvell,88pm886-a1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source: true
+
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^(ldo(1[0-6]|[1-9])|buck[1-5])$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ description: LDO or buck regulator.
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@30 {
+ compatible = "marvell,88pm886-a1";
+ reg = <0x30>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ wakeup-source;
+
+ regulators {
+ ldo2: ldo2 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo15: ldo15 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck2: buck2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/mfd/mediatek,mt8195-scpsys.yaml b/Bindings/mfd/mediatek,mt8195-scpsys.yaml
index c8c4812..768390b 100644
--- a/Bindings/mfd/mediatek,mt8195-scpsys.yaml
+++ b/Bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -22,8 +22,10 @@
- mediatek,mt8173-scpsys
- mediatek,mt8183-scpsys
- mediatek,mt8186-scpsys
+ - mediatek,mt8188-scpsys
- mediatek,mt8192-scpsys
- mediatek,mt8195-scpsys
+ - mediatek,mt8365-scpsys
- const: syscon
- const: simple-mfd
diff --git a/Bindings/mfd/mfd.txt b/Bindings/mfd/mfd.txt
index 336c049..b938fa2 100644
--- a/Bindings/mfd/mfd.txt
+++ b/Bindings/mfd/mfd.txt
@@ -17,13 +17,14 @@
Optional properties:
-- compatible : "simple-mfd" - this signifies that the operating system should
- consider all subnodes of the MFD device as separate devices akin to how
- "simple-bus" indicates when to see subnodes as children for a simple
- memory-mapped bus. For more complex devices, when the nexus driver has to
- probe registers to figure out what child devices exist etc, this should not
- be used. In the latter case the child devices will be determined by the
- operating system.
+- compatible : "simple-mfd" - this signifies that the operating system
+ should consider all subnodes of the MFD device as separate and independent
+ devices, so not needing any resources to be provided by the parent device.
+ Similarly to how "simple-bus" indicates when to see subnodes as children for
+ a simple memory-mapped bus.
+ For more complex devices, when the nexus driver has to probe registers to
+ figure out what child devices exist etc, this should not be used. In the
+ latter case the child devices will be determined by the operating system.
- ranges: Describes the address mapping relationship to the parent. Should set
the child's base address to 0, the physical address within parent's address
diff --git a/Bindings/mfd/qcom,pm8008.yaml b/Bindings/mfd/qcom,pm8008.yaml
index 0c75d8b..0c6e187 100644
--- a/Bindings/mfd/qcom,pm8008.yaml
+++ b/Bindings/mfd/qcom,pm8008.yaml
@@ -19,110 +19,136 @@
const: qcom,pm8008
reg:
- description:
- I2C slave address.
-
maxItems: 1
interrupts:
maxItems: 1
- description: Parent interrupt.
+ reset-gpios:
+ maxItems: 1
+
+ vdd-l1-l2-supply: true
+ vdd-l3-l4-supply: true
+ vdd-l5-supply: true
+ vdd-l6-supply: true
+ vdd-l7-supply: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
"#interrupt-cells":
const: 2
- description: |
- The first cell is the IRQ number, the second cell is the IRQ trigger
- flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
-
- interrupt-controller: true
-
- "#address-cells":
- const: 1
-
- "#size-cells":
+ "#thermal-sensor-cells":
const: 0
-patternProperties:
- "^gpio@[0-9a-f]+$":
+ pinctrl:
type: object
-
- description: |
- The GPIO peripheral. This node may be specified twice, one for each GPIO.
-
- properties:
- compatible:
- items:
- - const: qcom,pm8008-gpio
- - const: qcom,spmi-gpio
-
- reg:
- description: Peripheral address of one of the two GPIO peripherals.
- maxItems: 1
-
- gpio-controller: true
-
- gpio-ranges:
- maxItems: 1
-
- interrupt-controller: true
-
- "#interrupt-cells":
- const: 2
-
- "#gpio-cells":
- const: 2
-
- required:
- - compatible
- - reg
- - gpio-controller
- - interrupt-controller
- - "#gpio-cells"
- - gpio-ranges
- - "#interrupt-cells"
-
additionalProperties: false
+ patternProperties:
+ "-state$":
+ type: object
+
+ allOf:
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ items:
+ pattern: "^gpio[12]$"
+
+ function:
+ items:
+ - enum:
+ - normal
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^ldo[1-7]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- - "#address-cells"
- - "#size-cells"
+ - vdd-l1-l2-supply
+ - vdd-l3-l4-supply
+ - vdd-l5-supply
+ - vdd-l6-supply
+ - vdd-l7-supply
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+ - interrupt-controller
- "#interrupt-cells"
+ - "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
- #include <dt-bindings/mfd/qcom-pm8008.h>
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
- pmic@8 {
+ pm8008: pmic@8 {
compatible = "qcom,pm8008";
reg = <0x8>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;
- pm8008_gpios: gpio@c000 {
- compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
- reg = <0xc000>;
- gpio-controller;
- gpio-ranges = <&pm8008_gpios 0 0 2>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+
+ vdd-l1-l2-supply = <&vreg_s8b_1p2>;
+ vdd-l3-l4-supply = <&vreg_s1b_1p8>;
+ vdd-l5-supply = <&vreg_bob>;
+ vdd-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_bob>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ pinctrl {
+ gpio-keys-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+ };
+
+ regulators {
+ ldo1 {
+ regulator-name = "vreg_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ };
};
};
};
diff --git a/Bindings/mfd/qcom,spmi-pmic.yaml b/Bindings/mfd/qcom,spmi-pmic.yaml
index b7f01cb..a2b2fbf 100644
--- a/Bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Bindings/mfd/qcom,spmi-pmic.yaml
@@ -75,6 +75,7 @@
- qcom,pma8084
- qcom,pmc8180
- qcom,pmc8180c
+ - qcom,pmc8380
- qcom,pmd9635
- qcom,pmi632
- qcom,pmi8950
@@ -95,6 +96,7 @@
- qcom,pmx65
- qcom,pmx75
- qcom,smb2351
+ - qcom,smb2360
- const: qcom,spmi-pmic
reg:
diff --git a/Bindings/mfd/rockchip,rk809.yaml b/Bindings/mfd/rockchip,rk809.yaml
deleted file mode 100644
index 839c052..0000000
--- a/Bindings/mfd/rockchip,rk809.yaml
+++ /dev/null
@@ -1,288 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: RK809 Power Management Integrated Circuit
-
-maintainers:
- - Chris Zhong <zyw@rock-chips.com>
- - Zhang Qing <zhangqing@rock-chips.com>
-
-description: |
- Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
- that includes regulators, an RTC, and power button.
-
-properties:
- compatible:
- enum:
- - rockchip,rk809
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
- '#clock-cells':
- description: |
- See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
- minimum: 0
- maximum: 1
-
- clock-output-names:
- description:
- From common clock binding to override the default output clock name.
-
- rockchip,system-power-controller:
- type: boolean
- deprecated: true
- description:
- Telling whether or not this PMIC is controlling the system power.
-
- system-power-controller: true
-
- wakeup-source:
- type: boolean
- description:
- Device can be used as a wakeup source.
-
- vcc1-supply:
- description:
- The input supply for DCDC_REG1.
-
- vcc2-supply:
- description:
- The input supply for DCDC_REG2.
-
- vcc3-supply:
- description:
- The input supply for DCDC_REG3.
-
- vcc4-supply:
- description:
- The input supply for DCDC_REG4.
-
- vcc5-supply:
- description:
- The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
-
- vcc6-supply:
- description:
- The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
-
- vcc7-supply:
- description:
- The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
-
- vcc8-supply:
- description:
- The input supply for SWITCH_REG1.
-
- vcc9-supply:
- description:
- The input supply for DCDC_REG5 and SWITCH_REG2.
-
- regulators:
- type: object
- patternProperties:
- "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
- type: object
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
- unevaluatedProperties: false
-
-allOf:
- - if:
- properties:
- '#clock-cells':
- const: 0
-
- then:
- properties:
- clock-output-names:
- maxItems: 1
-
- else:
- properties:
- clock-output-names:
- maxItems: 2
-
-required:
- - compatible
- - reg
- - interrupts
- - "#clock-cells"
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/pinctrl/rockchip.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- interrupt-parent = <&gpio3>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l_pin>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sysin>;
- vcc2-supply = <&vcc_sysin>;
- vcc3-supply = <&vcc_sysin>;
- vcc4-supply = <&vcc_sysin>;
- vcc6-supply = <&vcc_sysin>;
- vcc7-supply = <&vcc_sysin>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sysin>;
- vcc10-supply = <&vcc_sysin>;
- vcc11-supply = <&vcc_sysin>;
- vcc12-supply = <&vcc3v3_sys>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: vcc_wl: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_pmupll: LDO_REG3 {
- regulator-name = "vcc1v8_pmupll";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
- };
diff --git a/Bindings/mfd/rockchip,rk817.yaml b/Bindings/mfd/rockchip,rk817.yaml
index 8c2fd0f..2cb6d17 100644
--- a/Bindings/mfd/rockchip,rk817.yaml
+++ b/Bindings/mfd/rockchip,rk817.yaml
@@ -4,20 +4,21 @@
$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: RK817 Power Management Integrated Circuit
+title: RK809/RK817 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
- Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
- that includes regulators, an RTC, a power button, an audio codec, and a
- battery charger manager.
+ Rockchip RK809/RK817 series PMIC. This device consists of an i2c controlled
+ MFD that includes regulators, an RTC, a power button and an audio codec.
+ The RK817 variant also provides a battery charger manager.
properties:
compatible:
enum:
+ - rockchip,rk809
- rockchip,rk817
reg:
@@ -32,6 +33,13 @@
minimum: 0
maximum: 1
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: mclk
+
clock-output-names:
description:
From common clock binding to override the default output clock name.
@@ -42,6 +50,9 @@
description:
Telling whether or not this PMIC is controlling the system power.
+ '#sound-dai-cells':
+ const: 0
+
system-power-controller: true
wakeup-source:
@@ -79,41 +90,22 @@
vcc8-supply:
description:
- The input supply for BOOST.
+ The input supply for BOOST on RK817, or for SWITCH_REG2 on RK809.
vcc9-supply:
description:
- The input supply for OTG_SWITCH.
+ The input supply for OTG_SWITCH on RK817,
+ or for DCDC_REG5 and SWITCH_REG1 on RK809.
regulators:
type: object
patternProperties:
- "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
- type: object
+ "^(LDO_REG[1-9]|DCDC_REG[1-5]|BOOST|OTG_SWITCH|SWITCH_REG[1-2])$":
+ $ref: /schemas/regulator/regulator.yaml
unevaluatedProperties: false
- $ref: /schemas/regulator/regulator.yaml#
- unevaluatedProperties: false
-
- clocks:
- description:
- The input clock for the audio codec.
-
- clock-names:
- description:
- The clock name for the codec clock.
- items:
- - const: mclk
-
- '#sound-dai-cells':
- description:
- Needed for the interpretation of sound dais.
- const: 0
+ additionalProperties: false
codec:
- description: |
- The child node for the codec to hold additional properties. If no
- additional properties are required for the codec, this node can be
- omitted.
type: object
additionalProperties: false
properties:
@@ -123,9 +115,6 @@
Describes if the microphone uses differential mode.
charger:
- description: |
- The child node for the charger to hold additional properties. If a
- battery is not in use, this node can be omitted.
type: object
$ref: /schemas/power/supply/power-supply.yaml
@@ -168,6 +157,7 @@
additionalProperties: false
allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
- if:
properties:
'#clock-cells':
@@ -183,6 +173,22 @@
clock-output-names:
maxItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk817
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC_REG5|SWITCH_REG[1-2])$": false
+ else:
+ properties:
+ regulators:
+ patternProperties:
+ "^(BOOST|OTG_SWITCH)$": false
+
required:
- compatible
- reg
diff --git a/Bindings/mfd/rohm,bd96801-pmic.yaml b/Bindings/mfd/rohm,bd96801-pmic.yaml
new file mode 100644
index 0000000..d381125
--- /dev/null
+++ b/Bindings/mfd/rohm,bd96801-pmic.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Scalable Power Management Integrated Circuit
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+ BD96801 is an automotive grade single-chip power management IC.
+ It integrates 4 buck converters and 3 LDOs with safety features like
+ over-/under voltage and over current detection and a watchdog.
+
+properties:
+ compatible:
+ const: rohm,bd96801
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
+ for fatal IRQs which will cause the PMIC to shut down power outputs.
+ In many systems this will shut down the SoC contolling the PMIC and
+ connecting/handling the errb can be omitted. However, there are cases
+ where the SoC is not powered by the PMIC or has a short time backup
+ energy to handle shutdown of critical hardware. In that case it may be
+ useful to connect the errb and handle errb
