blob: e7601c0f5a695a5de27fb6650b1b8ea64c0301c7 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT6779 Pin Controller Device Tree Bindings
maintainers:
- Andy Teng <andy.teng@mediatek.com>
description: |+
The pin controller node should be the child of a syscon node with the
required property:
- compatible: "syscon"
properties:
compatible:
const: mediatek,mt6779-pinctrl
reg:
minItems: 9
maxItems: 9
reg-names:
items:
- const: "gpio"
- const: "iocfg_rm"
- const: "iocfg_br"
- const: "iocfg_lm"
- const: "iocfg_lb"
- const: "iocfg_rt"
- const: "iocfg_lt"
- const: "iocfg_tl"
- const: "eint"
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
gpio-ranges:
minItems: 1
maxItems: 5
description: |
GPIO valid number range.
interrupt-controller: true
interrupts:
maxItems: 1
description: |
Specifies the summary IRQ.
"#interrupt-cells":
const: 2
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- reg-names
- gpio-controller
- "#gpio-cells"
- gpio-ranges
- interrupt-controller
- interrupts
- "#interrupt-cells"
patternProperties:
'-[0-9]*$':
type: object
patternProperties:
'-pins*$':
type: object
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input schmitt.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pinmux:
description:
integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are defined
as macros in boot/dts/<soc>-pinfunc.h directly.
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
input-disable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
mediatek,pull-up-adv:
description: |
Pull up setings for 2 pull resistors, R0 and R1. User can
configure those special pins. Valid arguments are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
mediatek,pull-down-adv:
description: |
Pull down settings for 2 pull resistors, R0 and R1. User can
configure those special pins. Valid arguments are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
required:
- pinmux
additionalProperties: false
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pio: pinctrl@10005000 {
compatible = "mediatek,mt6779-pinctrl";
reg = <0 0x10005000 0 0x1000>,
<0 0x11c20000 0 0x1000>,
<0 0x11d10000 0 0x1000>,
<0 0x11e20000 0 0x1000>,
<0 0x11e70000 0 0x1000>,
<0 0x11ea0000 0 0x1000>,
<0 0x11f20000 0 0x1000>,
<0 0x11f30000 0 0x1000>,
<0 0x1000b000 0 0x1000>;
reg-names = "gpio", "iocfg_rm",
"iocfg_br", "iocfg_lm",
"iocfg_lb", "iocfg_rt",
"iocfg_lt", "iocfg_tl",
"eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 210>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
mmc0_pins_default: mmc0-0 {
cmd-dat-pins {
pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
<PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
<PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
<PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
<PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
<PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO167__FUNC_MSDC0_CMD>;
input-enable;
mediatek,pull-up-adv = <1>;
};
clk-pins {
pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
mediatek,pull-down-adv = <2>;
};
rst-pins {
pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
mediatek,pull-up-adv = <0>;
};
};
};
mmc0 {
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-names = "default";
};
};