blob: a2f939137e3541e3b3f3e89627cdbb6d74b69c98 [file] [log] [blame]
Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
Required parameters:
compatible : Should be "st,stih407-thermal"
clock-names : Should be "thermal".
See: Documentation/devicetree/bindings/resource-names.txt
clocks : Phandle of the clock used by the thermal sensor.
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional parameters:
reg : For non-sysconf based sensors, this should be the physical base
address and length of the sensor's registers.
interrupts : Standard way to define interrupt number.
NB: For thermal sensor's for which no interrupt has been
defined, a polling delay of 1000ms will be used to read the
temperature from device.
temp0@91a0000 {
compatible = "st,stih407-thermal";
reg = <0x91a0000 0x28>;
clock-names = "thermal";
clocks = <&CLK_SYSIN>;
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
st,passive_cooling_temp = <110>;