Merge tag 'v6.10-rc7-dts-raw'
Linux 6.10-rc7
diff --git a/src/arm/rockchip/rk3066a.dtsi b/src/arm/rockchip/rk3066a.dtsi
index 30139f2..15cbd94 100644
--- a/src/arm/rockchip/rk3066a.dtsi
+++ b/src/arm/rockchip/rk3066a.dtsi
@@ -128,6 +128,7 @@
pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
power-domains = <&power RK3066_PD_VIO>;
rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
status = "disabled";
ports {
diff --git a/src/arm64/rockchip/rk3308-rock-pi-s.dts b/src/arm64/rockchip/rk3308-rock-pi-s.dts
index b47fe02..079101c 100644
--- a/src/arm64/rockchip/rk3308-rock-pi-s.dts
+++ b/src/arm64/rockchip/rk3308-rock-pi-s.dts
@@ -5,6 +5,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
#include "rk3308.dtsi"
/ {
@@ -24,17 +26,21 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+ pinctrl-0 = <&green_led>, <&heartbeat_led>;
green-led {
+ color = <LED_COLOR_ID_GREEN>;
default-state = "on";
+ function = LED_FUNCTION_POWER;
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
linux,default-trigger = "default-on";
};
blue-led {
+ color = <LED_COLOR_ID_BLUE>;
default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
linux,default-trigger = "heartbeat";
@@ -126,10 +132,12 @@
};
&emmc {
- bus-width = <4>;
cap-mmc-highspeed;
- mmc-hs200-1_8v;
+ cap-sd-highspeed;
+ no-sdio;
non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
vmmc-supply = <&vcc_io>;
status = "okay";
};
@@ -214,11 +222,11 @@
pinctrl-0 = <&rtc_32k>;
leds {
- green_led_gio: green-led-gpio {
+ green_led: green-led {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
- heartbeat_led_gpio: heartbeat-led-gpio {
+ heartbeat_led: heartbeat-led {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
diff --git a/src/arm64/rockchip/rk3308.dtsi b/src/arm64/rockchip/rk3308.dtsi
index 962ea89..c00da15 100644
--- a/src/arm64/rockchip/rk3308.dtsi
+++ b/src/arm64/rockchip/rk3308.dtsi
@@ -811,7 +811,7 @@
clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
<&cru SCLK_I2S2_8CH_RX_OUT>,
<&cru PCLK_ACODEC>;
- reset-names = "codec-reset";
+ reset-names = "codec";
resets = <&cru SRST_ACODEC_P>;
#sound-dai-cells = <0>;
status = "disabled";
diff --git a/src/arm64/rockchip/rk3328-rock-pi-e.dts b/src/arm64/rockchip/rk3328-rock-pi-e.dts
index f09d60b..a608a21 100644
--- a/src/arm64/rockchip/rk3328-rock-pi-e.dts
+++ b/src/arm64/rockchip/rk3328-rock-pi-e.dts
@@ -241,8 +241,8 @@
rk805: pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
- interrupt-parent = <&gpio2>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
gpio-controller;
diff --git a/src/arm64/rockchip/rk3368.dtsi b/src/arm64/rockchip/rk3368.dtsi
index 734f87d..73618df 100644
--- a/src/arm64/rockchip/rk3368.dtsi
+++ b/src/arm64/rockchip/rk3368.dtsi
@@ -793,6 +793,7 @@
dma-names = "tx";
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -804,6 +805,7 @@
clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
dmas = <&dmac_bus 6>, <&dmac_bus 7>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -817,6 +819,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s_8ch_bus>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
diff --git a/src/arm64/rockchip/rk3399-gru.dtsi b/src/arm64/rockchip/rk3399-gru.dtsi
index 789fd0d..3cd63d1 100644
--- a/src/arm64/rockchip/rk3399-gru.dtsi
+++ b/src/arm64/rockchip/rk3399-gru.dtsi
@@ -450,7 +450,7 @@
dlg,btn-cfg = <50>;
dlg,mic-det-thr = <500>;
dlg,jack-ins-deb = <20>;
- dlg,jack-det-rate = "32ms_64ms";
+ dlg,jack-det-rate = "32_64";
dlg,jack-rem-deb = <1>;
dlg,a-d-btn-thr = <0xa>;
diff --git a/src/arm64/rockchip/rk3566-quartz64-b.dts b/src/arm64/rockchip/rk3566-quartz64-b.dts
index 26322a3..b908ce0 100644
--- a/src/arm64/rockchip/rk3566-quartz64-b.dts
+++ b/src/arm64/rockchip/rk3566-quartz64-b.dts
@@ -289,7 +289,7 @@
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
diff --git a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
index 1a60442..e748714 100644
--- a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
+++ b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
@@ -444,6 +444,7 @@
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
diff --git a/src/arm64/rockchip/rk3588-quartzpro64.dts b/src/arm64/rockchip/rk3588-quartzpro64.dts
index b4f22d9..e80caa3 100644
--- a/src/arm64/rockchip/rk3588-quartzpro64.dts
+++ b/src/arm64/rockchip/rk3588-quartzpro64.dts
@@ -435,6 +435,7 @@
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
diff --git a/src/arm64/rockchip/rk3588-rock-5b.dts b/src/arm64/rockchip/rk3588-rock-5b.dts
index b8e15b7..2e75126 100644
--- a/src/arm64/rockchip/rk3588-rock-5b.dts
+++ b/src/arm64/rockchip/rk3588-rock-5b.dts
@@ -383,6 +383,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
diff --git a/src/arm64/rockchip/rk3588-tiger.dtsi b/src/arm64/rockchip/rk3588-tiger.dtsi
index aebe1fe..615094b 100644
--- a/src/arm64/rockchip/rk3588-tiger.dtsi
+++ b/src/arm64/rockchip/rk3588-tiger.dtsi
@@ -344,6 +344,11 @@
};
};
+&pwm0 {
+ pinctrl-0 = <&pwm0m1_pins>;
+ pinctrl-names = "default";
+};
+
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
diff --git a/src/arm64/rockchip/rk3588s-coolpi-4b.dts b/src/arm64/rockchip/rk3588s-coolpi-4b.dts
index 3b2ec1d..074c316 100644
--- a/src/arm64/rockchip/rk3588s-coolpi-4b.dts
+++ b/src/arm64/rockchip/rk3588s-coolpi-4b.dts
@@ -288,9 +288,9 @@
pinctrl-0 = <&i2c7m0_xfer>;
status = "okay";
- es8316: audio-codec@11 {
+ es8316: audio-codec@10 {
compatible = "everest,es8316";
- reg = <0x11>;
+ reg = <0x10>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
diff --git a/src/arm64/rockchip/rk3588s-rock-5a.dts b/src/arm64/rockchip/rk3588s-rock-5a.dts
index 8e2a076..3b9a349 100644
--- a/src/arm64/rockchip/rk3588s-rock-5a.dts
+++ b/src/arm64/rockchip/rk3588s-rock-5a.dts
@@ -366,6 +366,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
@@ -393,6 +394,7 @@
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
+ system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
diff --git a/src/riscv/canaan/canaan_kd233.dts b/src/riscv/canaan/canaan_kd233.dts
index 8df4cf3..a7d753b 100644
--- a/src/riscv/canaan/canaan_kd233.dts
+++ b/src/riscv/canaan/canaan_kd233.dts
@@ -15,6 +15,10 @@
model = "Kendryte KD233";
compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -46,7 +50,6 @@
&fpioa {
pinctrl-0 = <&jtag_pinctrl>;
pinctrl-names = "default";
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -118,6 +121,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&spi0 {
@@ -125,6 +129,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "canaan,kd233-tft", "ilitek,ili9341";
diff --git a/src/riscv/canaan/k210.dtsi b/src/riscv/canaan/k210.dtsi
index f87c516..4f5d40f 100644
--- a/src/riscv/canaan/k210.dtsi
+++ b/src/riscv/canaan/k210.dtsi
@@ -16,13 +16,6 @@
#size-cells = <1>;
compatible = "canaan,kendryte-k210";
- aliases {
- serial0 = &uarths0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- };
-
/*
* The K210 has an sv39 MMU following the privileged specification v1.9.
* Since this is a non-ratified draft specification, the kernel does not
@@ -137,6 +130,7 @@
reg = <0x38000000 0x1000>;
interrupts = <33>;
clocks = <&sysclk K210_CLK_CPU>;
+ status = "disabled";
};
gpio0: gpio-controller@38001000 {
@@ -152,6 +146,7 @@
<62>, <63>, <64>, <65>;
gpio-controller;
ngpios = <32>;
+ status = "disabled";
};
dmac0: dma-controller@50000000 {
@@ -187,6 +182,7 @@
<&sysclk K210_CLK_GPIO>;
clock-names = "bus", "db";
resets = <&sysrst K210_RST_GPIO>;
+ status = "disabled";
gpio1_0: gpio-port@0 {
#gpio-cells = <2>;
@@ -214,6 +210,7 @@
dsr-override;
cts-override;
ri-override;
+ status = "disabled";
};
uart2: serial@50220000 {
@@ -230,6 +227,7 @@
dsr-override;
cts-override;
ri-override;
+ status = "disabled";
};
uart3: serial@50230000 {
@@ -246,6 +244,7 @@
dsr-override;
cts-override;
ri-override;
+ status = "disabled";
};
spi2: spi@50240000 {
@@ -259,6 +258,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ssi_clk", "pclk";
resets = <&sysrst K210_RST_SPI2>;
+ status = "disabled";
};
i2s0: i2s@50250000 {
@@ -268,6 +268,7 @@
clocks = <&sysclk K210_CLK_I2S0>;
clock-names = "i2sclk";
resets = <&sysrst K210_RST_I2S0>;
+ status = "disabled";
};
i2s1: i2s@50260000 {
@@ -277,6 +278,7 @@
clocks = <&sysclk K210_CLK_I2S1>;
clock-names = "i2sclk";
resets = <&sysrst K210_RST_I2S1>;
+ status = "disabled";
};
i2s2: i2s@50270000 {
@@ -286,6 +288,7 @@
clocks = <&sysclk K210_CLK_I2S2>;
clock-names = "i2sclk";
resets = <&sysrst K210_RST_I2S2>;
+ status = "disabled";
};
i2c0: i2c@50280000 {
@@ -296,6 +299,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ref", "pclk";
resets = <&sysrst K210_RST_I2C0>;
+ status = "disabled";
};
i2c1: i2c@50290000 {
@@ -306,6 +310,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ref", "pclk";
resets = <&sysrst K210_RST_I2C1>;
+ status = "disabled";
};
i2c2: i2c@502a0000 {
@@ -316,6 +321,7 @@
<&sysclk K210_CLK_APB0>;
clock-names = "ref", "pclk";
resets = <&sysrst K210_RST_I2C2>;
+ status = "disabled";
};
fpioa: pinmux@502b0000 {
@@ -464,6 +470,7 @@
reset-names = "spi";
num-cs = <4>;
reg-io-width = <4>;
+ status = "disabled";
};
spi1: spi@53000000 {
@@ -479,6 +486,7 @@
reset-names = "spi";
num-cs = <4>;
reg-io-width = <4>;
+ status = "disabled";
};
spi3: spi@54000000 {
@@ -495,6 +503,7 @@
num-cs = <4>;
reg-io-width = <4>;
+ status = "disabled";
};
};
};
diff --git a/src/riscv/canaan/k210_generic.dts b/src/riscv/canaan/k210_generic.dts
index 396c8ca..5734cc0 100644
--- a/src/riscv/canaan/k210_generic.dts
+++ b/src/riscv/canaan/k210_generic.dts
@@ -15,6 +15,10 @@
model = "Kendryte K210 generic";
compatible = "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -24,7 +28,6 @@
&fpioa {
pinctrl-0 = <&jtag_pins>;
pinctrl-names = "default";
- status = "okay";
jtag_pins: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
diff --git a/src/riscv/canaan/sipeed_maix_bit.dts b/src/riscv/canaan/sipeed_maix_bit.dts
index 6d25bf0..2ab376d 100644
--- a/src/riscv/canaan/sipeed_maix_bit.dts
+++ b/src/riscv/canaan/sipeed_maix_bit.dts
@@ -17,6 +17,10 @@
compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
"canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -58,7 +62,6 @@
&fpioa {
pinctrl-names = "default";
pinctrl-0 = <&jtag_pinctrl>;
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -156,6 +159,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -170,6 +174,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
@@ -199,6 +204,8 @@
};
&spi3 {
+ status = "okay";
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/src/riscv/canaan/sipeed_maix_dock.dts b/src/riscv/canaan/sipeed_maix_dock.dts
index f4f4d8d..d98e207 100644
--- a/src/riscv/canaan/sipeed_maix_dock.dts
+++ b/src/riscv/canaan/sipeed_maix_dock.dts
@@ -17,6 +17,10 @@
compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
"canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -63,7 +67,6 @@
&fpioa {
pinctrl-0 = <&jtag_pinctrl>;
pinctrl-names = "default";
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -159,6 +162,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -173,6 +177,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
diff --git a/src/riscv/canaan/sipeed_maix_go.dts b/src/riscv/canaan/sipeed_maix_go.dts
index 0d86df4..79ecd54 100644
--- a/src/riscv/canaan/sipeed_maix_go.dts
+++ b/src/riscv/canaan/sipeed_maix_go.dts
@@ -16,6 +16,10 @@
model = "SiPeed MAIX GO";
compatible = "sipeed,maix-go", "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -69,7 +73,6 @@
&fpioa {
pinctrl-0 = <&jtag_pinctrl>;
pinctrl-names = "default";
- status = "okay";
jtag_pinctrl: jtag-pinmux {
pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
@@ -167,6 +170,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -181,6 +185,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
@@ -209,6 +214,8 @@
};
&spi3 {
+ status = "okay";
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/src/riscv/canaan/sipeed_maixduino.dts b/src/riscv/canaan/sipeed_maixduino.dts
index 5c05c49..019c03a 100644
--- a/src/riscv/canaan/sipeed_maixduino.dts
+++ b/src/riscv/canaan/sipeed_maixduino.dts
@@ -15,6 +15,10 @@
model = "SiPeed MAIXDUINO";
compatible = "sipeed,maixduino", "canaan,kendryte-k210";
+ aliases {
+ serial0 = &uarths0;
+ };
+
chosen {
bootargs = "earlycon console=ttySIF0";
stdout-path = "serial0:115200n8";
@@ -39,8 +43,6 @@
};
&fpioa {
- status = "okay";
-
uarths_pinctrl: uarths-pinmux {
pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
<K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
@@ -132,6 +134,7 @@
#sound-dai-cells = <1>;
pinctrl-0 = <&i2s0_pinctrl>;
pinctrl-names = "default";
+ status = "okay";
};
&i2c1 {
@@ -146,6 +149,7 @@
pinctrl-names = "default";
num-cs = <1>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
panel@0 {
compatible = "sitronix,st7789v";
@@ -174,6 +178,8 @@
};
&spi3 {
+ status = "okay";
+
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
diff --git a/src/riscv/starfive/jh7110-common.dtsi b/src/riscv/starfive/jh7110-common.dtsi
index 8ff6ea6..68d1671 100644
--- a/src/riscv/starfive/jh7110-common.dtsi
+++ b/src/riscv/starfive/jh7110-common.dtsi
@@ -244,7 +244,7 @@
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "emmc_vdd";
};
};
