| Amlogic Meson Power Controller (deprecated) | |
| =========================================== | |
| The Amlogic Meson SoCs embeds an internal Power domain controller. | |
| VPU Power Domain | |
| ---------------- | |
| The Video Processing Unit power domain is controlled by this power controller, | |
| but the domain requires some external resources to meet the correct power | |
| sequences. | |
| The bindings must respect the power domain bindings as described in the file | |
| power-domain.yaml | |
| Device Tree Bindings: | |
| --------------------- | |
| Required properties: | |
| - compatible: should be one of the following : | |
| - "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs | |
| - "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs | |
| - #power-domain-cells: should be 0 | |
| - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node | |
| - resets: phandles to the reset lines needed for this power demain sequence | |
| as described in ../reset/reset.txt | |
| - clocks: from common clock binding: handle to VPU and VAPB clocks | |
| - clock-names: from common clock binding: must contain "vpu", "vapb" | |
| corresponding to entry in the clocks property. | |
| Parent node should have the following properties : | |
| - compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" | |
| - reg: base address and size of the AO system control register space. | |
| Example: | |
| ------- | |
| ao_sysctrl: sys-ctrl@0 { | |
| compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; | |
| reg = <0x0 0x0 0x0 0x100>; | |
| pwrc_vpu: power-controller-vpu { | |
| compatible = "amlogic,meson-gx-pwrc-vpu"; | |
| #power-domain-cells = <0>; | |
| amlogic,hhi-sysctrl = <&sysctrl>; | |
| resets = <&reset RESET_VIU>, | |
| <&reset RESET_VENC>, | |
| <&reset RESET_VCBUS>, | |
| <&reset RESET_BT656>, | |
| <&reset RESET_DVIN_RESET>, | |
| <&reset RESET_RDMA>, | |
| <&reset RESET_VENCI>, | |
| <&reset RESET_VENCP>, | |
| <&reset RESET_VDAC>, | |
| <&reset RESET_VDI6>, | |
| <&reset RESET_VENCL>, | |
| <&reset RESET_VID_LOCK>; | |
| clocks = <&clkc CLKID_VPU>, | |
| <&clkc CLKID_VAPB>; | |
| clock-names = "vpu", "vapb"; | |
| }; | |
| }; | |