Merge tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc and iio driver fixes for
6.10-rc4. Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
.editorconfig: remove trim_trailing_whitespace option
jfs: xattr: fix buffer overflow for invalid xattr
misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
parport: amiga: Mark driver struct with __refdata to prevent section mismatch
mei: vsc: Fix wrong invocation of ACPI SID method
mei: vsc: Don't stop/restart mei device during system suspend/resume
mei: me: release irq in mei_me_pci_resume error path
mei: demote client disconnect warning on suspend to debug
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
...
[ upstream commit: 33f855cbb7fae085273083f44ecde6e8e96dc7d2 ]
diff --git a/Bindings/arm/stm32/st,mlahb.yaml b/Bindings/arm/stm32/st,mlahb.yaml
index d2dce23..3e99634 100644
--- a/Bindings/arm/stm32/st,mlahb.yaml
+++ b/Bindings/arm/stm32/st,mlahb.yaml
@@ -54,11 +54,10 @@
examples:
- |
- mlahb: ahb@38000000 {
+ ahb {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x10000000 0x40000>;
ranges;
dma-ranges = <0x00000000 0x38000000 0x10000>,
<0x10000000 0x10000000 0x60000>,
diff --git a/Bindings/arm/sunxi.yaml b/Bindings/arm/sunxi.yaml
index c6d0d8d..c2a158b 100644
--- a/Bindings/arm/sunxi.yaml
+++ b/Bindings/arm/sunxi.yaml
@@ -57,17 +57,17 @@
- const: allwinner,sun8i-v3s
- description: Anbernic RG35XX (2024)
- - items:
+ items:
- const: anbernic,rg35xx-2024
- const: allwinner,sun50i-h700
- description: Anbernic RG35XX Plus
- - items:
+ items:
- const: anbernic,rg35xx-plus
- const: allwinner,sun50i-h700
- description: Anbernic RG35XX H
- - items:
+ items:
- const: anbernic,rg35xx-h
- const: allwinner,sun50i-h700
diff --git a/Bindings/input/elan,ekth6915.yaml b/Bindings/input/elan,ekth6915.yaml
index dc4ac41..a62916d 100644
--- a/Bindings/input/elan,ekth6915.yaml
+++ b/Bindings/input/elan,ekth6915.yaml
@@ -18,9 +18,12 @@
properties:
compatible:
- enum:
- - elan,ekth6915
- - ilitek,ili2901
+ oneOf:
+ - items:
+ - enum:
+ - elan,ekth5015m
+ - const: elan,ekth6915
+ - const: elan,ekth6915
reg:
const: 0x10
@@ -33,6 +36,12 @@
reset-gpios:
description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+ no-reset-on-power-off:
+ type: boolean
+ description:
+ Reset line is wired so that it can (and should) be left deasserted when
+ the power supply is off.
+
vcc33-supply:
description: The 3.3V supply to the touchscreen.
@@ -58,8 +67,8 @@
#address-cells = <1>;
#size-cells = <0>;
- ap_ts: touchscreen@10 {
- compatible = "elan,ekth6915";
+ touchscreen@10 {
+ compatible = "elan,ekth5015m", "elan,ekth6915";
reg = <0x10>;
interrupt-parent = <&tlmm>;
diff --git a/Bindings/input/ilitek,ili2901.yaml b/Bindings/input/ilitek,ili2901.yaml
new file mode 100644
index 0000000..1abeec7
--- /dev/null
+++ b/Bindings/input/ilitek,ili2901.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+ - Jiri Kosina <jkosina@suse.com>
+
+description:
+ Supports the Ilitek ILI2901 touchscreen controller.
+ This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ilitek,ili2901
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ panel: true
+
+ reset-gpios:
+ maxItems: 1
+
+ vcc33-supply: true
+
+ vccio-supply: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vcc33-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2901";
+ reg = <0x41>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&pp3300_ts>;
+ };
+ };
diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
index 03edf2c..a420672 100644
--- a/include/dt-bindings/input/linux-event-codes.h
+++ b/include/dt-bindings/input/linux-event-codes.h
@@ -618,6 +618,8 @@
#define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */
#define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */
#define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */
+#define KEY_ACCESSIBILITY 0x24e /* Toggles the system bound accessibility UI/command (HUTRR116) */
+#define KEY_DO_NOT_DISTURB 0x24f /* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
index 6fc4b44..b8a4f3f 100644
--- a/include/dt-bindings/net/ti-dp83867.h
+++ b/include/dt-bindings/net/ti-dp83867.h
@@ -1,10 +1,10 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
/*
* Device Tree constants for the Texas Instruments DP83867 PHY
*
* Author: Dan Murphy <dmurphy@ti.com>
*
- * Copyright: (C) 2015 Texas Instruments, Inc.
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef _DT_BINDINGS_TI_DP83867_H
diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h
index 218b1a6..917114a 100644
--- a/include/dt-bindings/net/ti-dp83869.h
+++ b/include/dt-bindings/net/ti-dp83869.h
@@ -1,10 +1,10 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
/*
* Device Tree constants for the Texas Instruments DP83869 PHY
*
* Author: Dan Murphy <dmurphy@ti.com>
*
- * Copyright: (C) 2019 Texas Instruments, Inc.
+ * Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef _DT_BINDINGS_TI_DP83869_H
diff --git a/src/loongarch/loongson-2k0500-ref.dts b/src/loongarch/loongson-2k0500-ref.dts
index 8aefb0c..a34734a 100644
--- a/src/loongarch/loongson-2k0500-ref.dts
+++ b/src/loongarch/loongson-2k0500-ref.dts
@@ -44,14 +44,14 @@
&gmac0 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
bus_id = <0x0>;
};
&gmac1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
bus_id = <0x1>;
};
diff --git a/src/loongarch/loongson-2k1000-ref.dts b/src/loongarch/loongson-2k1000-ref.dts
index 8463fe0..23cf26c 100644
--- a/src/loongarch/loongson-2k1000-ref.dts
+++ b/src/loongarch/loongson-2k1000-ref.dts
@@ -43,7 +43,7 @@
&gmac0 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy0>;
mdio {
compatible = "snps,dwmac-mdio";
@@ -58,7 +58,7 @@
&gmac1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy1>;
mdio {
compatible = "snps,dwmac-mdio";
diff --git a/src/loongarch/loongson-2k2000-ref.dts b/src/loongarch/loongson-2k2000-ref.dts
index 74b99bd..ea9e698 100644
--- a/src/loongarch/loongson-2k2000-ref.dts
+++ b/src/loongarch/loongson-2k2000-ref.dts
@@ -92,7 +92,7 @@
&gmac2 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <&phy2>;
mdio {
compatible = "snps,dwmac-mdio";
