diff --git a/Bindings/Makefile b/Bindings/Makefile
index a638989..91c4d00 100644
--- a/Bindings/Makefile
+++ b/Bindings/Makefile
@@ -2,7 +2,6 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
-DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 DT_SCHEMA_MIN_VERSION = 2020.5
 
@@ -35,21 +34,40 @@
 
 DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
-DT_SCHEMA_FILES ?= $(DT_DOCS)
-
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
-
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
-	-Wno-graph_child_address
+	-Wno-graph_child_address \
+	-Wno-interrupt_provider
 
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
+ifeq ($(DT_SCHEMA_FILES),)
+
+# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
+# Just copy processed-schema-examples.yaml
+
+$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE
+	$(call if_changed,copy)
+
+DT_SCHEMA_FILES = $(DT_DOCS)
+
+else
+
+# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml
+
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-extra-y += processed-schema.yaml
+endif
+
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
+extra-$(CHECK_DTBS) += processed-schema.yaml
+
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
diff --git a/Bindings/arm/freescale/fsl,scu.txt b/Bindings/arm/freescale/fsl,scu.txt
index 7150474..10b8459 100644
--- a/Bindings/arm/freescale/fsl,scu.txt
+++ b/Bindings/arm/freescale/fsl,scu.txt
@@ -47,7 +47,7 @@
 			  &lsio_mu1 1 2
 			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
 		for detailed mailbox binding.
 
 Note: Each mu which supports general interrupt should have an alias correctly
diff --git a/Bindings/bus/socionext,uniphier-system-bus.yaml b/Bindings/bus/socionext,uniphier-system-bus.yaml
index c4c9119..a0c6c5d 100644
--- a/Bindings/bus/socionext,uniphier-system-bus.yaml
+++ b/Bindings/bus/socionext,uniphier-system-bus.yaml
@@ -80,14 +80,14 @@
         ranges = <1 0x00000000 0x42000000 0x02000000>,
                  <5 0x00000000 0x46000000 0x01000000>;
 
-        ethernet@1,01f00000 {
+        ethernet@1,1f00000 {
             compatible = "smsc,lan9115";
             reg = <1 0x01f00000 0x1000>;
             interrupts = <0 48 4>;
             phy-mode = "mii";
         };
 
-        uart@5,00200000 {
+        serial@5,200000 {
             compatible = "ns16550a";
             reg = <5 0x00200000 0x20>;
             interrupts = <0 49 4>;
diff --git a/Bindings/clock/imx27-clock.yaml b/Bindings/clock/imx27-clock.yaml
index b5f3ed0..a753654 100644
--- a/Bindings/clock/imx27-clock.yaml
+++ b/Bindings/clock/imx27-clock.yaml
@@ -7,7 +7,7 @@
 title: Clock bindings for Freescale i.MX27
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Bindings/clock/imx31-clock.yaml b/Bindings/clock/imx31-clock.yaml
index 1b6f75d..a25a374 100644
--- a/Bindings/clock/imx31-clock.yaml
+++ b/Bindings/clock/imx31-clock.yaml
@@ -7,7 +7,7 @@
 title: Clock bindings for Freescale i.MX31
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Bindings/clock/imx5-clock.yaml b/Bindings/clock/imx5-clock.yaml
index f5c2b3d..4d9e7c7 100644
--- a/Bindings/clock/imx5-clock.yaml
+++ b/Bindings/clock/imx5-clock.yaml
@@ -7,7 +7,7 @@
 title: Clock bindings for Freescale i.MX5
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Bindings/display/bridge/sii902x.txt b/Bindings/display/bridge/sii902x.txt
index 6e14e08..0d1db3f 100644
--- a/Bindings/display/bridge/sii902x.txt
+++ b/Bindings/display/bridge/sii902x.txt
@@ -37,7 +37,7 @@
 	simple-card or audio-graph-card binding. See their binding
 	documents on how to describe the way the sii902x device is
 	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.txt
+	Documentation/devicetree/bindings/sound/simple-card.yaml
 	Documentation/devicetree/bindings/sound/audio-graph-card.txt
 	Note: In case of the audio-graph-card binding the used port
 	index should be 3.
diff --git a/Bindings/display/imx/fsl-imx-drm.txt b/Bindings/display/imx/fsl-imx-drm.txt
index 5bf77f6..5a99490 100644
--- a/Bindings/display/imx/fsl-imx-drm.txt
+++ b/Bindings/display/imx/fsl-imx-drm.txt
@@ -68,7 +68,7 @@
   datasheet
 - clocks : phandle to the PRE axi clock input, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "axi"
 - interrupts: should contain the PRE interrupt
 - fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@
   datasheet
 - clocks : phandles to the PRG ipg and axi clock inputs, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "ipg" and "axi"
 - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
   PRE as the first entry and the muxable PREs following.
diff --git a/Bindings/display/imx/ldb.txt b/Bindings/display/imx/ldb.txt
index 38c637f..8e6e7d7 100644
--- a/Bindings/display/imx/ldb.txt
+++ b/Bindings/display/imx/ldb.txt
@@ -30,8 +30,8 @@
                 "di2_sel" - IPU2 DI0 mux
                 "di3_sel" - IPU2 DI1 mux
         The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 
 Optional properties:
  - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
diff --git a/Bindings/display/panel/arm,versatile-tft-panel.yaml b/Bindings/display/panel/arm,versatile-tft-panel.yaml
index 41fd571..be69e0c 100644
--- a/Bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -33,7 +33,7 @@
 
 examples:
   - |
-    sysreg {
+    sysreg@0 {
         compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
         reg = <0x00000 0x1000>;
 
diff --git a/Bindings/display/rockchip/rockchip-drm.yaml b/Bindings/display/rockchip/rockchip-drm.yaml
index ec8ae74..7204da5 100644
--- a/Bindings/display/rockchip/rockchip-drm.yaml
+++ b/Bindings/display/rockchip/rockchip-drm.yaml
@@ -24,7 +24,7 @@
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
-      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
 
 required:
   - compatible
diff --git a/Bindings/gpio/mediatek,mt7621-gpio.txt b/Bindings/gpio/mediatek,mt7621-gpio.txt
index ba45558..e1c49b6 100644
--- a/Bindings/gpio/mediatek,mt7621-gpio.txt
+++ b/Bindings/gpio/mediatek,mt7621-gpio.txt
@@ -12,7 +12,7 @@
    Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
 - #interrupt-cells : Specifies the number of cells needed to encode an
    interrupt. Should be 2. The first cell defines the interrupt number,
-   the second encodes the triger flags encoded as described in
+   the second encodes the trigger flags encoded as described in
    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - compatible:
   - "mediatek,mt7621-gpio" for Mediatek controllers
diff --git a/Bindings/interrupt-controller/csky,mpintc.txt b/Bindings/interrupt-controller/csky,mpintc.txt
index e134053..e6bbcae 100644
--- a/Bindings/interrupt-controller/csky,mpintc.txt
+++ b/Bindings/interrupt-controller/csky,mpintc.txt
@@ -10,7 +10,7 @@
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
-Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
  IRQ_TYPE_LEVEL_HIGH (default)
  IRQ_TYPE_LEVEL_LOW
  IRQ_TYPE_EDGE_RISING
diff --git a/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
index 4438432..ad76edc 100644
--- a/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ b/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
@@ -87,7 +87,7 @@
 		ranges;
 
 		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff90400 {
+		ipi_mailbox_rpu0: mailbox@ff990400 {
 			reg = <0xff990400 0x20>,
 			      <0xff990420 0x20>,
 			      <0xff990080 0x20>,
diff --git a/Bindings/misc/olpc,xo1.75-ec.txt b/Bindings/misc/olpc,xo1.75-ec.txt
index 8c4d649..2d7cdf1 100644
--- a/Bindings/misc/olpc,xo1.75-ec.txt
+++ b/Bindings/misc/olpc,xo1.75-ec.txt
@@ -8,7 +8,7 @@
 to receive a transfer (that is, when TX FIFO contains the response data) by
 strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
 SSP binding as documented in:
-<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
 
 Example:
 	&ssp3 {
diff --git a/Bindings/net/mediatek-bluetooth.txt b/Bindings/net/mediatek-bluetooth.txt
index 219bcbd..9ef5bac 100644
--- a/Bindings/net/mediatek-bluetooth.txt
+++ b/Bindings/net/mediatek-bluetooth.txt
@@ -3,7 +3,7 @@
 
 This device is a serial attached device to BTIF device and thus it must be a
 child node of the serial node with BTIF. The dt-bindings details for BTIF
-device can be known via Documentation/devicetree/bindings/serial/8250.txt.
+device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
 
 Required properties:
 
diff --git a/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/Bindings/pinctrl/renesas,pfc-pinctrl.txt
index b686131..1b8e8b4 100644
--- a/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -114,7 +114,7 @@
    [flags]>
 
 On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
 for documentation of the GPIO device tree bindings on those platforms.
 
 
diff --git a/Bindings/sound/audio-graph-card.txt b/Bindings/sound/audio-graph-card.txt
index 2696826..d5f6919 100644
--- a/Bindings/sound/audio-graph-card.txt
+++ b/Bindings/sound/audio-graph-card.txt
@@ -5,7 +5,7 @@
 see ${LINUX}/Documentation/devicetree/bindings/graph.txt
 
 Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
 
 Below are same as Simple-Card.
 
diff --git a/Bindings/sound/st,sti-asoc-card.txt b/Bindings/sound/st,sti-asoc-card.txt
index 4d51f3f..a6ffcde 100644
--- a/Bindings/sound/st,sti-asoc-card.txt
+++ b/Bindings/sound/st,sti-asoc-card.txt
@@ -5,7 +5,7 @@
 
 sti sound drivers allows to expose sti SoC audio interface through the
 generic ASoC simple card. For details about sound card declaration please refer to
-Documentation/devicetree/bindings/sound/simple-card.txt.
+Documentation/devicetree/bindings/sound/simple-card.yaml.
 
 1) sti-uniperiph-dai: audio dai device.
 ---------------------------------------
diff --git a/Bindings/spi/qcom,spi-geni-qcom.txt b/Bindings/spi/qcom,spi-geni-qcom.txt
index 790311a..c8c1e91 100644
--- a/Bindings/spi/qcom,spi-geni-qcom.txt
+++ b/Bindings/spi/qcom,spi-geni-qcom.txt
@@ -19,7 +19,7 @@
 
 SPI Controller nodes must be child of GENI based Qualcomm Universal
 Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
 
 SPI slave nodes must be children of the SPI master node and conform to SPI bus
 binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/Bindings/thermal/thermal-sensor.yaml b/Bindings/thermal/thermal-sensor.yaml
index fcd25a0..727d045 100644
--- a/Bindings/thermal/thermal-sensor.yaml
+++ b/Bindings/thermal/thermal-sensor.yaml
@@ -41,7 +41,7 @@
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc: soc {
             #address-cells = <2>;
             #size-cells = <2>;
 
diff --git a/Bindings/thermal/thermal-zones.yaml b/Bindings/thermal/thermal-zones.yaml
index b8515d3..3ec9cc8 100644
--- a/Bindings/thermal/thermal-zones.yaml
+++ b/Bindings/thermal/thermal-zones.yaml
@@ -224,7 +224,7 @@
     #include <dt-bindings/thermal/thermal.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc {
             #address-cells = <2>;
             #size-cells = <2>;
 
diff --git a/Bindings/thermal/ti,am654-thermal.yaml b/Bindings/thermal/ti,am654-thermal.yaml
index 25b9209..ea14de8 100644
--- a/Bindings/thermal/ti,am654-thermal.yaml
+++ b/Bindings/thermal/ti,am654-thermal.yaml
@@ -35,7 +35,7 @@
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
     vtm: thermal@42050000 {
         compatible = "ti,am654-vtm";
-        reg = <0x0 0x42050000 0x0 0x25c>;
+        reg = <0x42050000 0x25c>;
         power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
         #thermal-sensor-cells = <1>;
     };
diff --git a/Bindings/timer/csky,mptimer.txt b/Bindings/timer/csky,mptimer.txt
index 15cfec0..f5c7e99 100644
--- a/Bindings/timer/csky,mptimer.txt
+++ b/Bindings/timer/csky,mptimer.txt
@@ -8,7 +8,7 @@
  - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
  - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
  - PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR  "cr<6, 14>" Window value reg to triger next event.
+ - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
 
 ==============================
 timer node bindings definition
diff --git a/Bindings/usb/aspeed,usb-vhub.yaml b/Bindings/usb/aspeed,usb-vhub.yaml
index e4e83d3..8b019ac 100644
--- a/Bindings/usb/aspeed,usb-vhub.yaml
+++ b/Bindings/usb/aspeed,usb-vhub.yaml
@@ -127,8 +127,8 @@
                 #address-cells = <1>;
                 #size-cells = <0>;
 
-                string@0409 {
-                        reg = <0x0409>;
+                string@409 {
+                        reg = <0x409>;
                         manufacturer = "ASPEED";
                         product = "USB Virtual Hub";
                         serial-number = "0000";
diff --git a/src/mips/ingenic/gcw0.dts b/src/mips/ingenic/gcw0.dts
index 8d22828..bc72304 100644
--- a/src/mips/ingenic/gcw0.dts
+++ b/src/mips/ingenic/gcw0.dts
@@ -92,7 +92,7 @@
 			"MIC1N", "Built-in Mic";
 		simple-audio-card,pin-switches = "Speaker", "Headphones";
 
-		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;