common/config

##/bin/bash
#
# Copyright (c) 2000-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
#
# setup and check for config parameters, and in particular
#
# EMAIL -           email of the script runner.
# TEST_DIR -        scratch test directory that is in an already
#                   mounted XFS file system, needs to be be world
#                   writeable
# TEST_DEV -        device for file system containing TEST_DIR
#
# and optionally:
# SCRATCH_DEV -     device you can make a scratch file system on
# SCRATCH_MNT -     mount point for scratch file system
# SCRATCH_LOGDEV -  scratch log device for external log testing
# SCRATCH_RTDEV -   scratch rt dev
# TEST_LOGDEV -     test log device for external log testing
# TEST_RTDEV -      test rt dev
# TAPE_DEV -        the tape device for the xfsdump tests
# RMT_TAPE_DEV -    the remote tape device for the xfsdump tests
# RMT_IRIXTAPE_DEV- the IRIX remote tape device for the xfsdump tests
# RMT_TAPE_USER -   remote user for tape device
# SELINUX_MOUNT_OPTIONS - Options to use when SELinux is enabled.
#
# - These can be added to $HOST_CONFIG_DIR (witch default to ./config)
#   below or a separate local configuration file can be used (using
#   the HOST_OPTIONS variable).
# - This script is shared by the stress test system and the auto-qa
#   system
# - TEST_DEV & TEST_DIR must be assigned.
# - this script shouldn't make any assertions about filesystem
#   validity or mountedness.
#

. common/test_names

# all tests should use a common language setting to prevent golden
# output mismatches.
export LANG=C
export LC_ALL=C

PATH=".:$PATH"

export HOST=`hostname -s`
export HOSTOS=`uname -s`

export MODULAR=0               # using XFS as a module or not
export BOOT="/boot"            # install target for kernels
export EXTRA=${EXTRA:=xfs-qa}

# general parameters (mainly for auto-qa)
export SOAK_PROC=3             # -p option to fsstress
export SOAK_STRESS=10000       # -n option to fsstress
export SOAK_PASSES=-1          # count of repetitions of fsstress (while soaking)
export EMAIL=root@localhost    # where auto-qa will send its status messages
export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
export BENCH_PASSES=${BENCH_PASSES:=5}
export XFS_MKFS_OPTIONS=${XFS_MKFS_OPTIONS:=-bsize=4096}
export TIME_FACTOR=${TIME_FACTOR:=1}
export LOAD_FACTOR=${LOAD_FACTOR:=1}
export DEBUGFS_MNT=${DEBUGFS_MNT:="/sys/kernel/debug"}

# some constants for overlayfs setup
export OVL_UPPER="ovl-upper"
export OVL_LOWER="ovl-lower"
export OVL_WORK="ovl-work"
# overlay mount point parent must be the base fs root
export OVL_MNT="ovl-mnt"

export PWD=`pwd`
#export DEBUG=${DEBUG:=...} # arbitrary CFLAGS really.
export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}

export RECREATE_TEST_DEV=false

# Handle mkfs.$fstyp which does (or does not) require -f to overwrite
set_mkfs_prog_path_with_opts()
{
	local fstyp=$1
	local p=$(type -P mkfs.$fstyp)

	# Note: mkfs.f2fs doesn't support the --help option yet, but it doesn't
	# matter since it also prints the help when an invalid option is given.
	if [ "$p" != "" ] && \
		$p --help |& grep -q "[[:space:]]-f[[:space:]|]"; then
		echo "$p -f"
	else
		echo $p
	fi
}

_fatal()
{
    echo "$*"
    status=1
    exit 1
}

export MKFS_PROG="$(type -P mkfs)"
[ "$MKFS_PROG" = "" ] && _fatal "mkfs not found"

export MOUNT_PROG="$(type -P mount)"
[ "$MOUNT_PROG" = "" ] && _fatal "mount not found"

export UMOUNT_PROG="$(type -P umount)"
[ "$UMOUNT_PROG" = "" ] && _fatal "umount not found"

export FSSTRESS_PROG="./ltp/fsstress"
[ ! -x $FSSTRESS_PROG ] && _fatal "fsstress not found or executable"

export PERL_PROG="$(type -P perl)"
[ "$PERL_PROG" = "" ] && _fatal "perl not found"

export AWK_PROG="$(type -P awk)"
[ "$AWK_PROG" = "" ] && _fatal "awk not found"

export SED_PROG="$(type -P sed)"
[ "$SED_PROG" = "" ] && _fatal "sed not found"

export BC_PROG="$(type -P bc)"
[ "$BC_PROG" = "" ] && _fatal "bc not found"

export PS_ALL_FLAGS="-ef"

export DF_PROG="$(type -P df)"
[ "$DF_PROG" = "" ] && _fatal "df not found"
[ "$HOSTOS" = "Linux" ] && export DF_PROG="$DF_PROG -T -P"

export XFS_IO_PROG="$(type -P xfs_io)"
[ "$XFS_IO_PROG" = "" ] && _fatal "xfs_io not found"

export XFS_LOGPRINT_PROG="$(type -P xfs_logprint)"
export XFS_REPAIR_PROG="$(type -P xfs_repair)"
export XFS_DB_PROG="$(type -P xfs_db)"
export XFS_GROWFS_PROG=$(type -P xfs_growfs)
export XFS_SPACEMAN_PROG="$(type -P xfs_spaceman)"
export XFS_SCRUB_PROG="$(type -P xfs_scrub)"
export XFS_PARALLEL_REPAIR_PROG="$(type -P xfs_prepair)"
export XFS_PARALLEL_REPAIR64_PROG="$(type -P xfs_prepair64)"
export __XFSDUMP_PROG="$(type -P xfsdump)"
if [ -n "$__XFSDUMP_PROG" ]; then
	export XFSDUMP_PROG="$__XFSDUMP_PROG -e"
else
	export XFSDUMP_PROG=""
fi
export XFSRESTORE_PROG="$(type -P xfsrestore)"
export XFSINVUTIL_PROG="$(type -P xfsinvutil)"
export GETFATTR_PROG="$(type -P getfattr)"
export SETFATTR_PROG="$(type -P setfattr)"
export CHACL_PROG="$(type -P chacl)"
export ATTR_PROG="$(type -P attr)"
export QUOTA_PROG="$(type -P quota)"
export XFS_QUOTA_PROG="$(type -P xfs_quota)"
export KILLALL_PROG="$(type -P killall)"
export INDENT_PROG="$(type -P indent)"
export XFS_COPY_PROG="$(type -P xfs_copy)"
export FSTRIM_PROG="$(type -P fstrim)"
export DUMPE2FS_PROG="$(type -P dumpe2fs)"
export FIO_PROG="$(type -P fio)"
export FILEFRAG_PROG="$(type -P filefrag)"
export E4DEFRAG_PROG="$(type -P e4defrag)"
export LOGGER_PROG="$(type -P logger)"
export DBENCH_PROG="$(type -P dbench)"
export DMSETUP_PROG="$(type -P dmsetup)"
export WIPEFS_PROG="$(type -P wipefs)"
export DUMP_PROG="$(type -P dump)"
export RESTORE_PROG="$(type -P restore)"
export LVM_PROG="$(type -P lvm)"
export CHATTR_PROG="$(type -P chattr)"
export DEBUGFS_PROG="$(type -P debugfs)"
export UUIDGEN_PROG="$(type -P uuidgen)"
export GETRICHACL_PROG="$(type -P getrichacl)"
export SETRICHACL_PROG="$(type -P setrichacl)"
export KEYCTL_PROG="$(type -P keyctl)"
export XZ_PROG="$(type -P xz)"
export FLOCK_PROG="$(type -P flock)"
export LDD_PROG="$(type -P ldd)"
export TIMEOUT_PROG="$(type -P timeout)"
export MAN_PROG="$(type -P man)"
export NFS4_SETFACL_PROG="$(type -P nfs4_setfacl)"
export NFS4_GETFACL_PROG="$(type -P nfs4_getfacl)"
export UBIUPDATEVOL_PROG="$(type -P ubiupdatevol)"
export THIN_CHECK_PROG="$(type -P thin_check)"
export PYTHON2_PROG="$(type -P python2)"
export SQLITE3_PROG="$(type -P sqlite3)"
export TIMEOUT_PROG="$(type -P timeout)"
export SETCAP_PROG="$(type -P setcap)"
export GETCAP_PROG="$(type -P getcap)"
export CHECKBASHISMS_PROG="$(type -P checkbashisms)"

# use 'udevadm settle' or 'udevsettle' to wait for lv to be settled.
# newer systems have udevadm command but older systems like RHEL5 don't.
# But if neither one is available, just set it to "sleep 1" to wait for lv to
# be settled
UDEV_SETTLE_PROG="$(type -P udevadm)"
if [ "$UDEV_SETTLE_PROG" == "" ]; then
	# try udevsettle command
	UDEV_SETTLE_PROG="$(type -P udevsettle)"
else
	# udevadm is available, add 'settle' as subcommand
	UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
fi
# neither command is available, use sleep 1
if [ "$UDEV_SETTLE_PROG" == "" ]; then
	UDEV_SETTLE_PROG="sleep 1"
fi
export UDEV_SETTLE_PROG

case "$HOSTOS" in
    Linux)
	export MKFS_XFS_PROG=$(type -P mkfs.xfs)
	export MKFS_EXT4_PROG=$(type -P mkfs.ext4)
	export MKFS_UDF_PROG=$(type -P mkudffs)
	export MKFS_BTRFS_PROG=$(set_mkfs_prog_path_with_opts btrfs)
	export MKFS_F2FS_PROG=$(set_mkfs_prog_path_with_opts f2fs)
	export DUMP_F2FS_PROG=$(type -P dump.f2fs)
	export BTRFS_UTIL_PROG=$(type -P btrfs)
	export BTRFS_SHOW_SUPER_PROG=$(type -P btrfs-show-super)
	export BTRFS_CONVERT_PROG=$(type -P btrfs-convert)
	export BTRFS_DEBUG_TREE_PROG=$(type -P btrfs-debug-tree)
	export XFS_FSR_PROG=$(type -P xfs_fsr)
	export MKFS_NFS_PROG="false"
	export MKFS_CIFS_PROG="false"
	export MKFS_OVERLAY_PROG="false"
	export MKFS_REISER4_PROG=$(type -P mkfs.reiser4)
	export E2FSCK_PROG=$(type -P e2fsck)
	export TUNE2FS_PROG=$(type -P tune2fs)
	export FSCK_OVERLAY_PROG=$(type -P fsck.overlay)
        ;;
esac

# SELinux adds extra xattrs which can mess up our expected output.
# So, mount with a context, and they won't be created.
#
# Since the context= option only accepts contexts defined in the SELinux
# policy, and different systems may have different policies with
# different context names, use the context of an existing directory.
# Assume that any valid context is fine, since xfstests should really
# only be run from an "unconfined" process, or with SELinux in permissive
# mode.  But if not, just specify your own SELINUX_MOUNT_OPTIONS.
if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
	: ${SELINUX_MOUNT_OPTIONS:="-o context=$(stat -c %C /)"}
	export SELINUX_MOUNT_OPTIONS
fi

# check if mkfs.xfs supports v5 xfs
XFS_MKFS_HAS_NO_META_SUPPORT=""
touch /tmp/crc_check.img
$MKFS_XFS_PROG -N -d file,name=/tmp/crc_check.img,size=32m -m crc=0 \
	>/dev/null 2>&1;
if [ $? -ne 0 ]; then
	XFS_MKFS_HAS_NO_META_SUPPORT=true
fi
rm -f /tmp/crc_check.img
export XFS_MKFS_HAS_NO_META_SUPPORT

_mount_opts()
{
	case $FSTYP in
	9p)
		export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS
		;;
	xfs)
		export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS
		;;
	udf)
		export MOUNT_OPTIONS=$UDF_MOUNT_OPTIONS
		;;
	nfs)
		export MOUNT_OPTIONS=$NFS_MOUNT_OPTIONS
		;;
	cifs)
		export MOUNT_OPTIONS=$CIFS_MOUNT_OPTIONS
		;;
	ceph)
		export MOUNT_OPTIONS=$CEPHFS_MOUNT_OPTIONS
		;;
	glusterfs)
		export MOUNT_OPTIONS=$GLUSTERFS_MOUNT_OPTIONS
		;;
	overlay)
		export MOUNT_OPTIONS=$OVERLAY_MOUNT_OPTIONS
		;;
	ext2|ext3|ext4|ext4dev)
		# acls & xattrs aren't turned on by default on ext$FOO
		export MOUNT_OPTIONS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
		;;
	f2fs)
		export MOUNT_OPTIONS="-o acl,user_xattr $F2FS_MOUNT_OPTIONS"
		;;
	reiserfs)
		# acls & xattrs aren't turned on by default on reiserfs
		export MOUNT_OPTIONS="-o acl,user_xattr $REISERFS_MOUNT_OPTIONS"
		;;
       reiser4)
               # acls & xattrs aren't supported by reiser4
               export MOUNT_OPTIONS=$REISER4_MOUNT_OPTIONS
               ;;
	gfs2)
		# acls aren't turned on by default on gfs2
		export MOUNT_OPTIONS="-o acl $GFS2_MOUNT_OPTIONS"
		;;
	tmpfs)
		# We need to specify the size at mount, use 1G by default
		export MOUNT_OPTIONS="-o size=1G $TMPFS_MOUNT_OPTIONS"
		;;
	ubifs)
		export MOUNT_OPTIONS=$UBIFS_MOUNT_OPTIONS
		;;
	*)
		;;
	esac
}

_test_mount_opts()
{
	case $FSTYP in
	9p)
		export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS
		;;
	cifs)
		export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS
		;;
	ceph)
		export TEST_FS_MOUNT_OPTS=$CEPHFS_MOUNT_OPTIONS
		;;
	nfs)
		export TEST_FS_MOUNT_OPTS=$NFS_MOUNT_OPTIONS
		;;
	glusterfs)
		export TEST_FS_MOUNT_OPTS=$GLUSTERFS_MOUNT_OPTIONS
		;;
	ext2|ext3|ext4|ext4dev)
		# acls & xattrs aren't turned on by default on older ext$FOO
		export TEST_FS_MOUNT_OPTS="-o acl,user_xattr $EXT_MOUNT_OPTIONS"
		;;
	*)
		;;
	esac
}

_mkfs_opts()
{
	case $FSTYP in
	xfs)
		export MKFS_OPTIONS=$XFS_MKFS_OPTIONS
		;;
	udf)
		[ ! -z "$udf_fsize" ] && \
			UDF_MKFS_OPTIONS="$UDF_MKFS_OPTIONS -s $udf_fsize"
		export MKFS_OPTIONS=$UDF_MKFS_OPTIONS
		;;
	nfs)
		export MKFS_OPTIONS=$NFS_MKFS_OPTIONS
		;;
	cifs)
		export MKFS_OPTIONS=$CIFS_MKFS_OPTIONS
		;;
	ceph)
		export MKFS_OPTIONS=$CEPHFS_MKFS_OPTIONS
		;;
	reiserfs)
		export MKFS_OPTIONS="$REISERFS_MKFS_OPTIONS -q"
		;;
       reiser4)
		export MKFS_OPTIONS=$REISER4_MKFS_OPTIONS
		;;
	gfs2)
		export MKFS_OPTIONS="$GFS2_MKFS_OPTIONS -O -p lock_nolock"
		;;
	jfs)
		export MKFS_OPTIONS="$JFS_MKFS_OPTIONS -q"
		;;
	f2fs)
		export MKFS_OPTIONS="$F2FS_MKFS_OPTIONS"
		;;
	*)
		;;
	esac
}

_fsck_opts()
{
	case $FSTYP in
	ext2|ext3|ext4|ext4dev)
		export FSCK_OPTIONS="-nf"
		;;
	reiser*)
		export FSCK_OPTIONS="--yes"
		;;
	f2fs)
		export FSCK_OPTIONS=""
		;;
	*)
		export FSCK_OPTIONS="-n"
		;;
	esac
}

known_hosts()
{
	[ "$HOST_CONFIG_DIR" ] || HOST_CONFIG_DIR=`pwd`/configs

	[ -f /etc/xfsqa.config ]             && export HOST_OPTIONS=/etc/xfsqa.config
	[ -f $HOST_CONFIG_DIR/$HOST ]        && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST
	[ -f $HOST_CONFIG_DIR/$HOST.config ] && export HOST_OPTIONS=$HOST_CONFIG_DIR/$HOST.config
}

# Returns a list of sections in config file
# Each section starts with the section name in the format
# [section_name1]. Only alphanumeric characters and '_' is allowed
# in the section name otherwise the section will not be resognised.
# Section name must be contained between square brackets.
get_config_sections() {
	sed -n -e "s/^\[\([[:alnum:]_]*\)\]/\1/p" < $1
}

if [ ! -f "$HOST_OPTIONS" ]; then
	known_hosts
fi

export HOST_OPTIONS_SECTIONS="-no-sections-"
export OPTIONS_HAVE_SECTIONS=false
if [ -f "$HOST_OPTIONS" ]; then
	export HOST_OPTIONS_SECTIONS=`get_config_sections $HOST_OPTIONS`
	if [ -z "$HOST_OPTIONS_SECTIONS" ]; then
		. $HOST_OPTIONS
		export HOST_OPTIONS_SECTIONS="-no-sections-"
	else
		export OPTIONS_HAVE_SECTIONS=true
	fi
fi

_check_device()
{
	local name=$1
	local dev_needed=$2
	local dev=$3

	if [ -z "$dev" ]; then
		if [ "$dev_needed" == "required" ]; then
			_fatal "common/config: $name is required but not defined!"
		fi
		return 0
	fi

	if [ -b "$dev" ] || ( echo $dev | grep -qE ":|//" ); then
		# block device or a network url
		return 0
	fi

	case "$FSTYP" in
	9p)
		# 9p mount tags are just plain strings, so anything is allowed
		;;
	overlay)
		if [ ! -d "$dev" ]; then
			_fatal "common/config: $name ($dev) is not a directory for overlay"
		fi
		;;
	ubifs)
		if [ ! -c "$dev" ]; then
			_fatal "common/config: $name ($dev) is not a character device"
		fi
		;;
	*)
		_fatal "common/config: $name ($dev) is not a block device or a network filesystem"
	esac
}

# check and return a canonical mount point path
_canonicalize_mountpoint()
{
	local name=$1
	local dir=$2

	if [ -d "$dir" ]; then
		# this follows symlinks and removes all trailing "/"s
		readlink -e "$dir"
		return 0
	fi

	if [ "$FSTYP" != "overlay" ] || [[ "$name" == OVL_BASE_* ]]; then
		_fatal "common/config: $name ($dir) is not a directory"
	fi

	# base fs may not be mounted yet, so just check that parent dir
	# exists (where base fs will be mounted) because we are going to
	# mkdir the overlay mount point dir anyway
	local base=`basename $dir`
	local parent=`dirname $dir`
	parent=`_canonicalize_mountpoint OVL_BASE_$name "$parent"`

	# prepend the overlay mount point to canonical parent path
	echo "$parent/$base"
}

# On check -overlay, for the non multi section config case, this
# function is called on every test, before init_rc().
# When SCRATCH/TEST_* vars are defined in config file, config file
# is sourced on every test and this function overrides the vars
# every time.
# When SCRATCH/TEST_* vars are defined in evironment and not
# in config file, this function is called after vars have already
# been overriden in the previous test.
# In that case, TEST_DEV is a directory and not a blockdev and
# the function will return without overriding the SCRATCH/TEST_* vars.
_overlay_config_override()
{
	# There are 2 options for configuring overlayfs tests:
	#
	# 1. (legacy) SCRATCH/TEST_DEV point to existing directories
	#    on an already mounted fs.  In this case, the new
	#    OVL_BASE_SCRATCH/TEST_* vars are set to use the legacy
	#    vars values (even though they may not be mount points).
	#
	[ ! -d "$TEST_DEV" ] || export OVL_BASE_TEST_DIR="$TEST_DEV"
	[ ! -d "$SCRATCH_DEV" ] || export OVL_BASE_SCRATCH_MNT="$SCRATCH_DEV"

	# 2. SCRATCH/TEST_DEV point to the base fs partitions.  In this case,
	#    the new OVL_BASE_SCRATCH/TEST_DEV/MNT vars are set to the values
	#    of the configured base fs and SCRATCH/TEST_DEV vars are set to the
	#    overlayfs base and mount dirs inside base fs mount.
	[ -b "$TEST_DEV" ] || return 0

	# Config file may specify base fs type, but we obay -overlay flag
	export OVL_BASE_FSTYP="$FSTYP"
	export FSTYP=overlay

	# Store original base fs vars
	export OVL_BASE_TEST_DEV="$TEST_DEV"
	export OVL_BASE_TEST_DIR="$TEST_DIR"
	# If config does not set MOUNT_OPTIONS, its value may be
	# leftover from previous _overlay_config_override, so
	# don't use that value for base fs mount
	[ "$MOUNT_OPTIONS" != "$OVERLAY_MOUNT_OPTIONS" ] || unset MOUNT_OPTIONS
	export OVL_BASE_MOUNT_OPTIONS="$MOUNT_OPTIONS"

	# Set TEST vars to overlay base and mount dirs inside base fs
	export TEST_DEV="$OVL_BASE_TEST_DIR"
	export TEST_DIR="$OVL_BASE_TEST_DIR/$OVL_MNT"
	export MOUNT_OPTIONS="$OVERLAY_MOUNT_OPTIONS"

	[ -b "$SCRATCH_DEV" ] || return 0

	# Store original base fs vars
	export OVL_BASE_SCRATCH_DEV="$SCRATCH_DEV"
	export OVL_BASE_SCRATCH_MNT="$SCRATCH_MNT"

	# Set SCRATCH vars to overlay base and mount dirs inside base fs
	export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
	export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"

	# Set fsck options, use default if user not set directly.
	export FSCK_OPTIONS="$OVERLAY_FSCK_OPTIONS"
	[ -z "$FSCK_OPTIONS" ] && _fsck_opts
}

_overlay_config_restore()
{
	export OVERLAY=true
	[ -z "$OVL_BASE_FSTYP" ] || export FSTYP=$OVL_BASE_FSTYP
	[ -z "$OVL_BASE_TEST_DEV" ] || export TEST_DEV=$OVL_BASE_TEST_DEV
	[ -z "$OVL_BASE_TEST_DIR" ] || export TEST_DIR=$OVL_BASE_TEST_DIR
	[ -z "$OVL_BASE_SCRATCH_DEV" ] || export SCRATCH_DEV=$OVL_BASE_SCRATCH_DEV
	[ -z "$OVL_BASE_SCRATCH_MNT" ] || export SCRATCH_MNT=$OVL_BASE_SCRATCH_MNT
	[ -z "$OVL_BASE_MOUNT_OPTIONS" ] || export MOUNT_OPTIONS=$OVL_BASE_MOUNT_OPTIONS
}

# Parse config section options. This function will parse all the configuration
# within a single section which name is passed as an argument. For section
# name format see comments in get_config_sections().
# Empty lines and everything after '#' will be ignored.
# Configuration options should be defined in the format
#
# CONFIG_OPTION=value
#
# This 'CONFIG_OPTION' variable and will be exported as an environment variable.
parse_config_section() {
	SECTION=$1
	if ! $OPTIONS_HAVE_SECTIONS; then
		return 0
	fi
	eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
		-e 's/#.*$//' \
		-e 's/[[:space:]]*$//' \
		-e 's/^[[:space:]]*//' \
		-e "s/^\([^=]*\)=\"\?'\?\([^\"']*\)\"\?'\?$/export \1=\"\2\"/" \
		< $HOST_OPTIONS \
		| sed -n -e "/^\[$SECTION\]/,/^\s*\[/{/^[^#].*\=.*/p;}"`
}

get_next_config() {
	if [ ! -z "$CONFIG_INCLUDED" ] && ! $OPTIONS_HAVE_SECTIONS; then
		return 0
	fi

	# We might have overriden FSTYP and TEST/SCRATCH vars with overlay values
	# in the previous section, so restore them to original values stored in
	# OVL_BASE_*.
	# We need to do this *before* old FSTYP and MOUNT_OPTIONS are recorded
	# and *before* SCRATCH_DEV and MOUNT_OPTIONS are unset
	if [ "$FSTYP" == "overlay" ]; then
		_overlay_config_restore
	fi

	local OLD_FSTYP=$FSTYP
	local OLD_MOUNT_OPTIONS=$MOUNT_OPTIONS
	local OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
	local OLD_MKFS_OPTIONS=$MKFS_OPTIONS
	local OLD_FSCK_OPTIONS=$FSCK_OPTIONS
	local OLD_USE_EXTERNAL=$USE_EXTERNAL

	unset MOUNT_OPTIONS
	unset TEST_FS_MOUNT_OPTS
	unset MKFS_OPTIONS
	unset FSCK_OPTIONS
	unset USE_EXTERNAL

	# We might have deduced SCRATCH_DEV from the SCRATCH_DEV_POOL in the previous
	# run, so we have to unset it now.
	if [ "$SCRATCH_DEV_NOT_SET" == "true" ]; then
		unset SCRATCH_DEV
	fi

	parse_config_section $1

	if [ ! -z "$OLD_FSTYP" ] && [ $OLD_FSTYP != $FSTYP ]; then
		[ -z "$MOUNT_OPTIONS" ] && _mount_opts
		[ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
		[ -z "$MKFS_OPTIONS" ] && _mkfs_opts
		[ -z "$FSCK_OPTIONS" ] && _fsck_opts

		# clear the external devices if we are not using them
		if [ -z "$USE_EXTERNAL" ]; then
			unset TEST_RTDEV
			unset TEST_LOGDEV
			unset SCRATCH_RTDEV
			unset SCRATCH_LOGDEV
		fi
	else
		[ -z "$MOUNT_OPTIONS" ] && export MOUNT_OPTIONS=$OLD_MOUNT_OPTIONS
		[ -z "$TEST_FS_MOUNT_OPTS" ] && export TEST_FS_MOUNT_OPTS=$OLD_TEST_FS_MOUNT_OPTS
		[ -z "$MKFS_OPTIONS" ] && export MKFS_OPTIONS=$OLD_MKFS_OPTIONS
		[ -z "$FSCK_OPTIONS" ] && export FSCK_OPTIONS=$OLD_FSCK_OPTIONS
		[ -z "$USE_EXTERNAL" ] && export USE_EXTERNAL=$OLD_USE_EXTERNAL
	fi

	# set default RESULT_BASE
	if [ -z "$RESULT_BASE" ]; then
		export RESULT_BASE="$here/results/"
	fi

	#  Mandatory Config values.
	MC=""
	[ -z "$EMAIL" ]          && MC="$MC EMAIL"
	[ -z "$TEST_DIR" ]       && MC="$MC TEST_DIR"
	[ -z "$TEST_DEV" ]       && MC="$MC TEST_DEV"

	if [ -n "$MC" ]; then
		echo "Warning: need to define parameters for host $HOST"
		echo "       or set variables:"
		echo "       $MC"
		exit 1
	fi

	_check_device TEST_DEV required $TEST_DEV
	export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`

	# a btrfs tester will set only SCRATCH_DEV_POOL, we will put first of its dev
	# to SCRATCH_DEV and rest to SCRATCH_DEV_POOL to maintain the backward compatibility
	if [ ! -z "$SCRATCH_DEV_POOL" ]; then
		if [ ! -z "$SCRATCH_DEV" ]; then
			echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
			exit 1
		fi
		SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
		export SCRATCH_DEV
		export SCRATCH_DEV_NOT_SET=true
	fi

	_check_device SCRATCH_DEV optional $SCRATCH_DEV
	export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`

	if [ -n "$USE_EXTERNAL" ]; then
		_check_device TEST_RTDEV optional $TEST_RTDEV
		_check_device TEST_LOGDEV optional $TEST_LOGDEV
		_check_device SCRATCH_RTDEV optional $SCRATCH_RTDEV
		_check_device SCRATCH_LOGDEV optional $SCRATCH_LOGDEV
	fi

	# Override FSTYP from config when running ./check -overlay
	# and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs.
	# We need to do this *after* default mount options are set by base FSTYP
	# and *after* SCRATCH_DEV is deduced from SCRATCH_DEV_POOL
	if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
		_overlay_config_override
	fi
}

if [ -z "$CONFIG_INCLUDED" ]; then
	get_next_config `echo $HOST_OPTIONS_SECTIONS | cut -f1 -d" "`
	export CONFIG_INCLUDED=true

	# Autodetect fs type based on what's on $TEST_DEV unless it's been set
	# externally
	if [ -z "$FSTYP" ] && \
	   [ "$HOSTOS" == "Linux" -o "$OSTYPE" == "linux-gnu" ] && \
	   [ ! -z "$TEST_DEV" ]; then
		FSTYP=`blkid -c /dev/null -s TYPE -o value $TEST_DEV`
	fi
	FSTYP=${FSTYP:=xfs}
	export FSTYP
	[ -z "$MOUNT_OPTIONS" ] && _mount_opts
	[ -z "$TEST_FS_MOUNT_OPTS" ] && _test_mount_opts
	[ -z "$MKFS_OPTIONS" ] && _mkfs_opts
	[ -z "$FSCK_OPTIONS" ] && _fsck_opts
else
	# We get here for the non multi section case, on every test that sources
	# common/rc after re-sourcing the HOST_OPTIONS config file.
	# Because of this re-sourcing, we need to re-canonicalize the configured
	# mount points and re-override TEST/SCRATCH_DEV overlay vars.

	# canonicalize the mount points
	# this follows symlinks and removes all trailing "/"s
	export TEST_DIR=`_canonicalize_mountpoint TEST_DIR $TEST_DIR`
	export SCRATCH_MNT=`_canonicalize_mountpoint SCRATCH_MNT $SCRATCH_MNT`

	# Override FSTYP from config when running ./check -overlay
	# and maybe override base fs TEST/SCRATCH_DEV with overlay base dirs
	if [ "$OVERLAY" == "true" -o "$FSTYP" == "overlay" ]; then
		_overlay_config_override
	fi
fi

# make sure this script returns success
/bin/true