#!/bin/bash
#
# Control script for QA
#
# Copyright (c) 2000-2002,2006 Silicon Graphics, Inc.  All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
#

tmp=/tmp/$$
status=0
needwrap=true
needsum=true
n_try=0
try=""
n_bad=0
sum_bad=0
bad=""
n_notrun=0
notrun=""
interrupt=true
diff="diff -u"
showme=false
have_test_arg=false
randomize=false
export here=`pwd`
xfile=""
brief_test_summary=false
_err_msg=""
do_report=false
DUMP_OUTPUT=false

# start the initialisation work now
iam=check

export MSGVERB="text:action"
export QA_CHECK_FS=${QA_CHECK_FS:=true}

# number of diff lines from a failed test, 0 for whole output
export DIFF_LENGTH=${DIFF_LENGTH:=10}

# by default don't output timestamps
timestamp=${TIMESTAMP:=false}

rm -f $tmp.list $tmp.tmp $tmp.grep $here/$iam.out $tmp.xlist $tmp.report.*

SRC_GROUPS="generic shared"
export SRC_DIR="tests"

usage()
{
    echo "Usage: $0 [options] [testlist]"'

check options
    -nfs                test NFS
    -glusterfs                test GlusterFS
    -cifs               test CIFS
    -9p			test 9p
    -overlay		test overlay
    -pvfs2          test PVFS2
    -tmpfs              test TMPFS
    -ubifs              test ubifs
    -l			line mode diff
    -udiff		show unified diff (default)
    -n			show me, do not run tests
    -T			output timestamps
    -r			randomize test order
    -d			dump test output to stdout
    -b			brief test summary
    -R fmt[,fmt]	generate report in formats specified. Supported format: [xunit]
    --large-fs		optimise scratch device for large filesystems
    -s section		run only specified section from config file
    -S section		exclude the specified section from the config file

testlist options
    -g group[,group...]	include tests from these groups
    -x group[,group...]	exclude tests from these groups
    -X exclude_file	exclude individual tests
    -E external_file	exclude individual tests
    [testlist]		include tests matching names in testlist

testlist argument is a list of tests in the form of <test dir>/<test name>.

<test dir> is a directory under tests that contains a group file,
with a list of the names of the tests in that directory.

<test name> may be either a specific test file name (e.g. xfs/001) or
a test file name match pattern (e.g. xfs/*).

group argument is either a name of a tests group to collect from all
the test dirs (e.g. quick) or a name of a tests group to collect from
a specific tests dir in the form of <test dir>/<group name> (e.g. xfs/quick).
If you want to run all the tests in the test suite, use "-g all" to specify all
groups.

exclude_file argument refers to a name of a file inside each test directory.
for every test dir where this file is found, the listed test names are
excluded from the list of tests to run from that test dir.

external_file argument is a path to a single file containing a list of tests
to exclude in the form of <test dir>/<test name>.

examples:
 check xfs/001
 check -g quick
 check -g xfs/quick
 check -x stress xfs/*
 check -X .exclude -g auto
 check -E ~/.xfstests.exclude
'
	    exit 0
}

get_sub_group_list()
{
	local d=$1
	local grp=$2

	test -s "$SRC_DIR/$d/group" || return 1

	local grpl=$(sed -n < $SRC_DIR/$d/group \
		-e 's/#.*//' \
		-e 's/$/ /' \
		-e "s;^\($VALID_TEST_NAME\).* $grp .*;$SRC_DIR/$d/\1;p")
	echo $grpl
}

get_group_list()
{
	local grp=$1
	local grpl=""
	local sub=$(dirname $grp)

	if [ -n "$sub" -a "$sub" != "." -a -d "$SRC_DIR/$sub" ]; then
		# group is given as <subdir>/<group> (e.g. xfs/quick)
		grp=$(basename $grp)
		get_sub_group_list $sub $grp
		return
	fi

	for d in $SRC_GROUPS $FSTYP; do
		if ! test -d "$SRC_DIR/$d" ; then
			continue
		fi
		grpl="$grpl $(get_sub_group_list $d $grp)"
	done
	echo $grpl
}

# Find all tests, excluding files that are test metadata such as group files.
# It matches test names against $VALID_TEST_NAME defined in common/rc
get_all_tests()
{
	touch $tmp.list
	for d in $SRC_GROUPS $FSTYP; do
		if ! test -d "$SRC_DIR/$d" ; then
			continue
		fi
		ls $SRC_DIR/$d/* | \
			grep -v "\..*" | \
			grep "^$SRC_DIR/$d/$VALID_TEST_NAME"| \
			grep -v "group\|Makefile" >> $tmp.list 2>/dev/null
	done
}

# takes the list of tests to run in $tmp.list, and removes the tests passed to
# the function from that list.
trim_test_list()
{
	test_list="$*"

	rm -f $tmp.grep
	numsed=0
	for t in $test_list
	do
	    if [ $numsed -gt 100 ]; then
		grep -v -f $tmp.grep <$tmp.list >$tmp.tmp
		mv $tmp.tmp $tmp.list
		numsed=0
		rm -f $tmp.grep
	    fi
	    echo "^$t\$" >>$tmp.grep
	    numsed=`expr $numsed + 1`
	done
	grep -v -f $tmp.grep <$tmp.list >$tmp.tmp
	mv $tmp.tmp $tmp.list
	rm -f $tmp.grep
}


_wallclock()
{
    date "+%s"
}

_timestamp()
{
    now=`date "+%T"`
    echo -n " [$now]"
}

_prepare_test_list()
{
	unset list
	# Tests specified on the command line
	if [ -s $tmp.arglist ]; then
		cat $tmp.arglist > $tmp.list
	else
		touch $tmp.list
	fi

	# Specified groups to include
	# Note that the CLI processing adds a leading space to the first group
	# parameter, so we have to catch that here checking for "all"
	if ! $have_test_arg && [ "$GROUP_LIST" == " all" ]; then
		# no test numbers, do everything
		get_all_tests
	else
		for group in $GROUP_LIST; do
			list=$(get_group_list $group)
			if [ -z "$list" ]; then
				echo "Group \"$group\" is empty or not defined?"
				exit 1
			fi

			for t in $list; do
				grep -s "^$t\$" $tmp.list >/dev/null || \
							echo "$t" >>$tmp.list
			done
		done
	fi

	# Specified groups to exclude
	for xgroup in $XGROUP_LIST; do
		list=$(get_group_list $xgroup)
		if [ -z "$list" ]; then
			echo "Group \"$xgroup\" is empty or not defined?"
			exit 1
		fi

		trim_test_list $list
	done

	# sort the list of tests into numeric order
	list=`sort -n $tmp.list | uniq`
	rm -f $tmp.list

	if $randomize
	then
		list=`echo $list | awk -f randomize.awk`
	fi
}

# Process command arguments first.
while [ $# -gt 0 ]; do
	case "$1" in
	-\? | -h | --help) usage ;;

	-nfs)		FSTYP=nfs ;;
	-glusterfs)	FSTYP=glusterfs ;;
	-cifs)		FSTYP=cifs ;;
	-9p)		FSTYP=9p ;;
	-overlay)	FSTYP=overlay; export OVERLAY=true ;;
	-pvfs2)		FSTYP=pvfs2 ;;
	-tmpfs)		FSTYP=tmpfs ;;
	-ubifs)		FSTYP=ubifs ;;

	-g)	group=$2 ; shift ;
		GROUP_LIST="$GROUP_LIST ${group//,/ }"
		;;

	-x)	xgroup=$2 ; shift ;
		XGROUP_LIST="$XGROUP_LIST ${xgroup//,/ }"
		;;

	-X)	xfile=$2; shift ;
		for d in $SRC_GROUPS $FSTYP; do
			[ -f $SRC_DIR/$d/$xfile ] || continue
			for f in `sed "s/#.*$//" $SRC_DIR/$d/$xfile`; do
				echo $d/$f >> $tmp.xlist
			done
		done
		;;
	-E)	xfile=$2; shift ;
		if [ -f $xfile ]; then
			sed "s/#.*$//" "$xfile" >> $tmp.xlist
	        fi
		;;
	-s)	RUN_SECTION="$RUN_SECTION $2"; shift ;;
	-S)	EXCLUDE_SECTION="$EXCLUDE_SECTION $2"; shift ;;
	-l)	diff="diff" ;;
	-udiff)	diff="$diff -u" ;;

	-n)	showme=true ;;
        -r)	randomize=true ;;

	-T)	timestamp=true ;;
	-d)	DUMP_OUTPUT=true ;;
	-b)	brief_test_summary=true;;
	-R)	report_fmt=$2 ; shift ;
		REPORT_LIST="$REPORT_LIST ${report_fmt//,/ }"
		do_report=true
		;;
	--large-fs) export LARGE_SCRATCH_DEV=yes ;;
	--extra-space=*) export SCRATCH_DEV_EMPTY_SPACE=${r#*=} ;;

	-*)	usage ;;
	*)	# not an argument, we've got tests now.
		have_test_arg=true ;;
	esac

	# if we've found a test specification, the break out of the processing
	# loop before we shift the arguments so that this is the first argument
	# that we process in the test arg loop below.
	if $have_test_arg; then
		break;
	fi

	shift
done

# we need common/rc, that also sources common/config. We need to source it
# after processing args, overlay needs FSTYP set before sourcing common/config
if ! . ./common/rc; then
	echo "check: failed to source common/rc"
	exit 1
fi

# Process tests from command line now.
if $have_test_arg; then
	while [ $# -gt 0 ]; do
		case "$1" in
		-*)	echo "Arguments before tests, please!"
			status=1
			exit $status
			;;
		*)	# Expand test pattern (e.g. xfs/???, *fs/001)
			list=$(cd $SRC_DIR; echo $1)
			for t in $list; do
				test_dir=`dirname $t`
				test_dir=${test_dir#$SRC_DIR/*}
				test_name=`basename $t`
				group_file=$SRC_DIR/$test_dir/group

				if egrep -q "^$test_name" $group_file; then
					# in group file ... OK
					echo $SRC_DIR/$test_dir/$test_name \
						>>$tmp.arglist
				else
					# oops
					echo "$t - unknown test, ignored"
				fi
			done
			;;
		esac

		shift
	done
elif [ -z "$GROUP_LIST" ]; then
	# default group list is the auto group. If any other group or test is
	# specified, we use that instead.
	GROUP_LIST="auto"
fi

if [ `id -u` -ne 0 ]
then
    echo "check: QA must be run as root"
    exit 1
fi

_wipe_counters()
{
	n_try="0"
	n_bad="0"
	n_notrun="0"
	unset try notrun bad
}

_wrapup()
{
	seq="check"
	check="$RESULT_BASE/check"

	if $showme; then
		if $needwrap; then
			if $do_report; then
				_make_section_report
			fi
			needwrap=false
		fi
	elif $needwrap; then
		if [ -f $check.time -a -f $tmp.time ]; then
			cat $check.time $tmp.time  \
				| $AWK_PROG '
				{ t[$1] = $2 }
				END {
					if (NR > 0) {
						for (i in t) print i " " t[i]
					}
				}' \
				| sort -n >$tmp.out
			mv $tmp.out $check.time
		fi

		echo "" >>$check.log
		date >>$check.log

		echo "SECTION       -- $section" >>$tmp.summary
		echo "=========================" >>$tmp.summary
		if [ ! -z "$n_try" -a $n_try != 0 ]; then
			if [ $brief_test_summary == "false" ]; then
				echo "Ran:$try"
				echo "Ran:$try" >>$tmp.summary
			fi
			echo "Ran:$try" >>$check.log
		fi

		$interrupt && echo "Interrupted!" | tee -a $check.log

		if [ ! -z "$notrun" ]; then
			if [ $brief_test_summary == "false" ]; then
				echo "Not run:$notrun"
				echo "Not run:$notrun" >>$tmp.summary
			fi
			echo "Not run:$notrun" >>$check.log
		fi

		if [ ! -z "$n_bad" -a $n_bad != 0 ]; then
			echo "Failures:$bad"
			echo "Failed $n_bad of $n_try tests"
			echo "Failures:$bad" >>$check.log
			echo "Failed $n_bad of $n_try tests" >>$check.log
			echo "Failures:$bad" >>$tmp.summary
			echo "Failed $n_bad of $n_try tests" >>$tmp.summary
		else
			echo "Passed all $n_try tests"
			echo "Passed all $n_try tests" >>$check.log
			echo "Passed all $n_try tests" >>$tmp.summary
		fi
		echo "" >>$tmp.summary
		if $do_report; then
			_make_section_report
		fi
		needwrap=false
	fi

	sum_bad=`expr $sum_bad + $n_bad`
	_wipe_counters
	rm -f /tmp/*.rawout /tmp/*.out /tmp/*.err /tmp/*.time
	if ! $OPTIONS_HAVE_SECTIONS; then
		rm -f $tmp.*
	fi
}

_summary()
{
	_wrapup
	if $showme; then
		:
	elif $needsum; then
		count=`wc -L $tmp.summary | cut -f1 -d" "`
		cat $tmp.summary
		needsum=false
	fi
	rm -f $tmp.*
}

_check_filesystems()
{
	if [ -f ${RESULT_DIR}/require_test ]; then
		_check_test_fs || err=true
		rm -f ${RESULT_DIR}/require_test*
	else
		_test_unmount 2> /dev/null
	fi
	if [ -f ${RESULT_DIR}/require_scratch ]; then
		_check_scratch_fs || err=true
		rm -f ${RESULT_DIR}/require_scratch*
	else
		_scratch_unmount 2> /dev/null
	fi
}

_expunge_test()
{
	local TEST_ID="$1"
	if [ -s $tmp.xlist ]; then
		if grep -q $TEST_ID $tmp.xlist; then
			echo "       [expunged]"
			return 1
		fi
	fi
	return 0
}

_init_kmemleak
_prepare_test_list

if $OPTIONS_HAVE_SECTIONS; then
	trap "_summary; exit \$status" 0 1 2 3 15
else
	trap "_wrapup; exit \$status" 0 1 2 3 15
fi

for section in $HOST_OPTIONS_SECTIONS; do
	OLD_FSTYP=$FSTYP
	OLD_TEST_FS_MOUNT_OPTS=$TEST_FS_MOUNT_OPTS
	get_next_config $section

	# Do we need to run only some sections ?
	if [ ! -z "$RUN_SECTION" ]; then
		skip=true
		for s in $RUN_SECTION; do
			if [ $section == $s ]; then
				skip=false
				break;
			fi
		done
		if $skip; then
			continue
		fi
	fi

	# Did this section get excluded?
	if [ ! -z "$EXCLUDE_SECTION" ]; then
		skip=false
		for s in $EXCLUDE_SECTION; do
			if [ $section == $s ]; then
				skip=true
				break;
			fi
		done
		if $skip; then
			continue
		fi
	fi

	mkdir -p $RESULT_BASE
	if [ ! -d $RESULT_BASE ]; then
		echo "failed to create results directory $RESULT_BASE"
		status=1
		exit
	fi

	if $OPTIONS_HAVE_SECTIONS; then
		echo "SECTION       -- $section"
	fi

	sect_start=`_wallclock`
	if $RECREATE_TEST_DEV || [ "$OLD_FSTYP" != "$FSTYP" ]; then
		echo "RECREATING    -- $FSTYP on $TEST_DEV"
		_test_unmount 2> /dev/null
		if ! _test_mkfs >$tmp.err 2>&1
		then
			echo "our local _test_mkfs routine ..."
			cat $tmp.err
			echo "check: failed to mkfs \$TEST_DEV using specified options"
			status=1
			exit
		fi
		if ! _test_mount
		then
			echo "check: failed to mount $TEST_DEV on $TEST_DIR"
			status=1
			exit
		fi
		_prepare_test_list
	elif [ "$OLD_TEST_FS_MOUNT_OPTS" != "$TEST_FS_MOUNT_OPTS" ]; then
		_test_unmount 2> /dev/null
		if ! _test_mount
		then
			echo "check: failed to mount $TEST_DEV on $TEST_DIR"
			status=1
			exit
		fi
	fi

	init_rc

	seq="check"
	check="$RESULT_BASE/check"

	# don't leave old full output behind on a clean run
	rm -f $check.full

	[ -f $check.time ] || touch $check.time

	# print out our test configuration
	echo "FSTYP         -- `_full_fstyp_details`"
	echo "PLATFORM      -- `_full_platform_details`"
	if [ ! -z "$SCRATCH_DEV" ]; then
	  echo "MKFS_OPTIONS  -- `_scratch_mkfs_options`"
	  echo "MOUNT_OPTIONS -- `_scratch_mount_options`"
	fi
	echo
	needwrap=true

	if [ ! -z "$SCRATCH_DEV" ]; then
	  _scratch_unmount 2> /dev/null
	  # call the overridden mkfs - make sure the FS is built
	  # the same as we'll create it later.

	  if ! _scratch_mkfs >$tmp.err 2>&1
	  then
	      echo "our local _scratch_mkfs routine ..."
	      cat $tmp.err
	      echo "check: failed to mkfs \$SCRATCH_DEV using specified options"
	      status=1
	      exit
	  fi

	  # call the overridden mount - make sure the FS mounts with
	  # the same options that we'll mount with later.
	  if ! _scratch_mount >$tmp.err 2>&1
	  then
	      echo "our local mount routine ..."
	      cat $tmp.err
	      echo "check: failed to mount \$SCRATCH_DEV using specified options"
	      status=1
	      exit
	  fi
	fi

	seqres="$check"
	_check_test_fs

	for seq in $list
	do
	    err=false
	    _err_msg=""
	    if [ ! -f $seq ]; then
	        # Try to get full name in case the user supplied only seq id
	        # and the test has a name. A bit of hassle to find really
	        # the test and not its sample output or helping files.
	        bname=$(basename $seq)
	        full_seq=$(find $(dirname $seq) -name $bname* -executable |
	            awk '(NR == 1 || length < length(shortest)) { shortest = $0 }\
	                END { print shortest }')
	        if [ -f $full_seq ] \
	            && [ x$(echo $bname | grep -o "^$VALID_TEST_ID") != x ]; then
	            seq=$full_seq
	        fi
	    fi

	    # the filename for the test and the name output are different.
	    # we don't include the tests/ directory in the name output.
	    export seqnum=`echo $seq | sed -e "s;$SRC_DIR/;;"`

	    # Similarly, the result directory needs to replace the tests/
	    # part of the test location.
	    group=`dirname $seq`
	    if $OPTIONS_HAVE_SECTIONS; then
		export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;${RESULT_BASE}/$section;"`
		REPORT_DIR="$RESULT_BASE/$section"
	    else
		export RESULT_DIR=`echo $group | sed -e "s;$SRC_DIR;$RESULT_BASE;"`
		REPORT_DIR="$RESULT_BASE"
	    fi
	    seqres="$REPORT_DIR/$seqnum"

	    mkdir -p $RESULT_DIR

	    echo -n "$seqnum"

	    if $showme; then
		_expunge_test $seqnum
		if [ $? -eq 1 ]; then
			continue
		fi
		echo
		start=0
		stop=0
		n_notrun=`expr $n_notrun + 1`
		if $do_report; then
			_make_testcase_report "list"
		fi
		continue
	    fi
	    tc_status="pass"
	    if [ ! -f $seq ]; then
		echo " - no such test?"
	    else
		# really going to try and run this one
		#
		rm -f $seqres.out.bad

		# check if we really should run it
		_expunge_test $seqnum
		if [ $? -eq 1 ]; then
			continue
		fi

		# slashes now in names, sed barfs on them so use grep
		lasttime=`grep -w ^$seqnum $check.time | awk '// {print $2}'`
		if [ "X$lasttime" != X ]; then
			echo -n " ${lasttime}s ..."
		else
			echo -n "	"	# prettier output with timestamps.
		fi
		rm -f core $seqres.notrun

		start=`_wallclock`
		$timestamp && echo -n "	["`date "+%T"`"]"
		[ ! -x $seq ] && chmod u+x $seq # ensure we can run it
		$LOGGER_PROG "run xfstest $seqnum"
		if [ -w /dev/kmsg ]; then
			export date_time=`date +"%F %T"`
			echo "run fstests $seqnum at $date_time" > /dev/kmsg
			# _check_dmesg depends on this log in dmesg
			touch ${RESULT_DIR}/check_dmesg
		fi
		if [ "$DUMP_OUTPUT" = true ]; then
			./$seq 2>&1 | tee $tmp.out
			# Because $? would get tee's return code
			sts=${PIPESTATUS[0]}
		else
			./$seq >$tmp.out 2>&1
			sts=$?
		fi
		$timestamp && _timestamp
		stop=`_wallclock`

		if [ -f core ]
		then
		    _err_msg="[dumped core]"
		    echo -n " $_err_msg"
		    mv core $RESULT_BASE/$seqnum.core
		    err=true
		fi

		if [ -f $seqres.notrun ]
		then
		    $timestamp || echo -n " [not run] "
		    $timestamp && echo " [not run]" && echo -n "	$seqnum -- "
		    cat $seqres.notrun
		    notrun="$notrun $seqnum"
		    n_notrun=`expr $n_notrun + 1`
		    tc_status="notrun"
		else
		    if [ $sts -ne 0 ]
		    then
			_err_msg="[failed, exit status $sts]"
			echo -n " $_err_msg"
			err=true
		    fi
		    if [ ! -f $seq.out ]
		    then
			_dump_err "no qualified output"
			err=true
		    else

			# coreutils 8.16+ changed quote formats in error messages from
			# `foo' to 'foo'. Filter old versions to match the new version.
			sed -i "s/\`/\'/g" $tmp.out
			if diff $seq.out $tmp.out >/dev/null 2>&1
			then
			    if $err
			    then
				:
			    else
				echo "$seqnum `expr $stop - $start`" >>$tmp.time
				echo -n " `expr $stop - $start`s"
			    fi
			    echo ""
			else
			    echo " - output mismatch (see $seqres.out.bad)"
			    mv $tmp.out $seqres.out.bad
			    $diff $seq.out $seqres.out.bad | {
				if test "$DIFF_LENGTH" -le 0; then
					cat
				else
					head -n "$DIFF_LENGTH"
					echo "..."
					echo "(Run '$diff $seq.out $seqres.out.bad'" \
						" to see the entire diff)"
				fi; } | \
				sed -e 's/^\(.\)/    \1/'
			    _err_msg="output mismatch (see $diff $seq.out $seqres.out.bad)"
			    err=true
			fi
		    fi
		    try="$try $seqnum"
		    n_try=`expr $n_try + 1`
		    _check_filesystems
		    _check_dmesg || err=true
		    _check_kmemleak || err=true
		fi

	    fi

	    # come here for each test, except when $showme is true
	    #
	    if $err
	    then
		bad="$bad $seqnum"
		n_bad=`expr $n_bad + 1`
		tc_status="fail"
	    fi
	    if $do_report; then
		_make_testcase_report "$tc_status"
	    fi
	    seq="after_$seqnum"
	done
	sect_stop=`_wallclock`
	interrupt=false
	_wrapup
	interrupt=true
	echo

	_test_unmount 2> /dev/null
	_scratch_unmount 2> /dev/null
done

interrupt=false
status=`expr $sum_bad != 0`
exit